Hotspots are visible and are working OK but wifi card can't connect.
dmesg | grep iwl3945 ( kernel 3.9.0-rc1/rc2 ):
[ 13.930138] iwl3945: Intel(R) PRO/Wireless 3945ABG/BG Network
Connection driver for Linux, in-tree:s
[ 13.930145] iwl3945: Copyright(c) 2003-2011 Intel Corporation
[ 13.971267] iwl3945 0000:02:00.0: Tunable channels: 13 802.11bg, 23
802.11a channels
[ 13.971275] iwl3945 0000:02:00.0: Detected Intel Wireless WiFi Link
3945ABG
[ 13.971441] iwl3945 0000:02:00.0: irq 43 for MSI/MSI-X
[ 15.518646] iwl3945 0000:02:00.0: loaded firmware version 15.32.2.9
[ 20.885241] iwl3945 0000:02:00.0: Microcode SW error detected.
Restarting 0x82000008.
[ 20.885251] iwl3945 0000:02:00.0: Loaded firmware version: 15.32.2.9
[ 20.885286] iwl3945 0000:02:00.0: Start IWL Error Log Dump:
[ 20.885290] iwl3945 0000:02:00.0: Status: 0x000202E4, count: 1
[ 20.885294] iwl3945 0000:02:00.0: Desc Time asrtPC blink2
ilink1 nmiPC Line
[ 20.885526] iwl3945 0000:02:00.0: SYSASSERT (0x5) 0000201042
0x008B6 0x00274 0x00320 0x04CA6 116
[ 20.885545] iwl3945 0000:02:00.0: Error Reply type 0x00000005 cmd
C_TX (0x1C) seq 0x0016 ser 0x00740000
[ 20.885552] iwl3945 0000:02:00.0: Command C_TX_PWR_TBL failed: FW Error
[ 20.885558] iwl3945 0000:02:00.0: Error setting Tx power (-5).
[ 20.887300] iwl3945 0000:02:00.0: Can't stop Rx DMA.
[ 21.173032] iwl3945 0000:02:00.0: Microcode SW error detected.
Restarting 0x82000008.
[ 21.173038] iwl3945 0000:02:00.0: Loaded firmware version: 15.32.2.9
[ 21.173072] iwl3945 0000:02:00.0: Start IWL Error Log Dump:
[ 21.173076] iwl3945 0000:02:00.0: Status: 0x000202E4, count: 1
[ 21.173080] iwl3945 0000:02:00.0: Desc Time asrtPC blink2
ilink1 nmiPC Line
[ 21.173309] iwl3945 0000:02:00.0: SYSASSERT (0x5) 0000208934
0x008B6 0x0035E 0x00320 0x00000 267
[ 21.173320] iwl3945 0000:02:00.0: Error Reply type 0x00000001 cmd
N_ALIVE (0x01) seq 0x0402 ser 0x00010000
[ 21.175058] iwl3945 0000:02:00.0: Can't stop Rx DMA.
dmesg | grep iwl3945 ( kernel 3.8.1 connected correctly):
[ 2.744464] iwl3945: Intel(R) PRO/Wireless 3945ABG/BG Network
Connection driver for Linux, in-tree:s
[ 2.744470] iwl3945: Copyright(c) 2003-2011 Intel Corporation
[ 2.794481] iwl3945 0000:02:00.0: Tunable channels: 13 802.11bg, 23
802.11a channels
[ 2.794490] iwl3945 0000:02:00.0: Detected Intel Wireless WiFi Link
3945ABG
[ 2.794653] iwl3945 0000:02:00.0: irq 43 for MSI/MSI-X
[ 4.111179] iwl3945 0000:02:00.0: loaded firmware version 15.32.2.9
On Tue, Mar 12, 2013 at 08:30:47AM +0000, Pedro Francisco wrote:
> On Mon, Mar 11, 2013 at 7:48 PM, Krzysztof Kolasa <[email protected]> wrote:
> > Hotspots are visible and are working OK but wifi card can't connect.
> >
>
> Hit this bug also, on the GNOME-3.7.90.iso (based on FC19 testing
> ISO), "Can't stop Rx DMA." and friends.
>
> iwl3945 was/is working fine on 3.8.
>
> Krzysztof Kolasa, you may want to see
> http://www.spinics.net/lists/linux-wireless/msg104564.html on
> requested debugging procedure for the problem.
I'm just tested 3.9-rc2 and have the same problems (including
dma map warning). So I don't need debug logs for that.
However still I would like to see 3.8 logs from Zdenek.
Stanislaw
On Tue, Mar 12, 2013 at 9:58 AM, Stanislaw Gruszka <[email protected]> wrote:
> On Tue, Mar 12, 2013 at 08:30:47AM +0000, Pedro Francisco wrote:
>> On Mon, Mar 11, 2013 at 7:48 PM, Krzysztof Kolasa <[email protected]> wrote:
>> > Hotspots are visible and are working OK but wifi card can't connect.
>> >
>>
>> Hit this bug also, on the GNOME-3.7.90.iso (based on FC19 testing
>> ISO), "Can't stop Rx DMA." and friends.
>>
>> -snip
>
> I'm just tested 3.9-rc2 and have the same problems (including
> dma map warning). So I don't need debug logs for that.
> However still I would like to see 3.8 logs from Zdenek.
Just checking, this problem reported above is independent from the DMA
map warning, right?
( I tested with 3.9.0-0.rc3.git0.3.fc19.i686.PAE :
Mar 19 18:17:05 s2 kernel: iwl3945 0000:02:00.0: Queue 4 stuck for 2495 ms.
(...)
Mar 19 18:17:13 s2 kernel: iwl3945 0000:02:00.0: Microcode SW error
detected. Restarting 0x82000008.
(...)
Mar 19 18:17:13 s2 kernel: iwl3945 0000:02:00.0: Status: 0x000202E4, count: 1 ).
On Mon, Mar 11, 2013 at 7:48 PM, Krzysztof Kolasa <[email protected]> wrote:
> Hotspots are visible and are working OK but wifi card can't connect.
>
Hit this bug also, on the GNOME-3.7.90.iso (based on FC19 testing
ISO), "Can't stop Rx DMA." and friends.
iwl3945 was/is working fine on 3.8.
Krzysztof Kolasa, you may want to see
http://www.spinics.net/lists/linux-wireless/msg104564.html on
requested debugging procedure for the problem.
On Tue, Mar 19, 2013 at 10:09:13PM +0000, Pedro Francisco wrote:
> On Tue, Mar 12, 2013 at 9:58 AM, Stanislaw Gruszka <[email protected]> wrote:
> > On Tue, Mar 12, 2013 at 08:30:47AM +0000, Pedro Francisco wrote:
> >> On Mon, Mar 11, 2013 at 7:48 PM, Krzysztof Kolasa <[email protected]> wrote:
> >> > Hotspots are visible and are working OK but wifi card can't connect.
> >> >
> >>
> >> Hit this bug also, on the GNOME-3.7.90.iso (based on FC19 testing
> >> ISO), "Can't stop Rx DMA." and friends.
> >>
> >> -snip
> >
> > I'm just tested 3.9-rc2 and have the same problems (including
> > dma map warning). So I don't need debug logs for that.
> > However still I would like to see 3.8 logs from Zdenek.
>
> Just checking, this problem reported above is independent from the DMA
> map warning, right?
Actually not, but patch I posted should fix both those problems.
> ( I tested with 3.9.0-0.rc3.git0.3.fc19.i686.PAE :
> Mar 19 18:17:05 s2 kernel: iwl3945 0000:02:00.0: Queue 4 stuck for 2495 ms.
> (...)
> Mar 19 18:17:13 s2 kernel: iwl3945 0000:02:00.0: Microcode SW error
> detected. Restarting 0x82000008.
> (...)
> Mar 19 18:17:13 s2 kernel: iwl3945 0000:02:00.0: Status: 0x000202E4, count: 1 ).
Patch should be applied on 3.9-rc4 ...
Stanislaw