Hi all,
I get a firmware crash using latest openwrt 18.06.1 on the Netgear
R7800 with stock firmware
Dmesg is :
[ 13.804366] ath10k_pci 0000:01:00.0: assign IRQ: got 67
[ 13.804805] ath10k_pci 0000:01:00.0: enabling device (0140 -> 0142)
[ 13.804887] ath10k_pci 0000:01:00.0: enabling bus mastering
[ 13.805346] ath10k_pci 0000:01:00.0: pci irq msi oper_irq_mode 2
irq_mode 0 reset_mode 0
[ 13.974787] ath10k_pci 0000:01:00.0: Direct firmware load for
ath10k/pre-cal-pci-0000:01:00.0.bin failed with error -2
[ 13.974827] ath10k_pci 0000:01:00.0: Falling back to user helper
[ 14.304794] ath10k_pci 0000:01:00.0: Direct firmware load for
ath10k/QCA9984/hw1.0/firmware-6.bin failed with error -2
[ 14.304857] ath10k_pci 0000:01:00.0: Falling back to user helper
[ 14.337111] firmware ath10k!QCA9984!hw1.0!firmware-6.bin:
firmware_loading_store: map pages failed
[ 14.702947] ath10k_pci 0000:01:00.0: qca9984/qca9994 hw1.0 target
0x01000000 chip_id 0x00000000 sub 168c:cafe
[ 14.702997] ath10k_pci 0000:01:00.0: kconfig debug 0 debugfs 1
tracing 0 dfs 1 testmode 1
[ 14.716459] ath10k_pci 0000:01:00.0: firmware ver 10.4-3.5.3-00053
api 5 features no-p2p,mfp,peer-flow-ctrl,btcoex-param,allows-mesh-bcast,no-ps
crc32 4c56a386
[ 15.973104] ath10k_pci 0000:01:00.0: board_file api 2 bmi_id 0:31
crc32 dd6d039c
[ 19.753460] ath10k_pci 0000:01:00.0: firmware crashed! (guid
ca7089d2-df9a-4f9d-8fa6-d1b908cf3220)
[ 19.753494] ath10k_pci 0000:01:00.0: qca9984/qca9994 hw1.0 target
0x01000000 chip_id 0x00000000 sub 168c:cafe
[ 19.761307] ath10k_pci 0000:01:00.0: kconfig debug 0 debugfs 1
tracing 0 dfs 1 testmode 1
[ 19.773202] ath10k_pci 0000:01:00.0: firmware ver 10.4-3.5.3-00053
api 5 features no-p2p,mfp,peer-flow-ctrl,btcoex-param,allows-mesh-bcast,no-ps
crc32 4c56a386
[ 19.779887] ath10k_pci 0000:01:00.0: board_file api 2 bmi_id 0:31
crc32 dd6d039c
[ 19.793511] ath10k_pci 0000:01:00.0: htt-ver 0.0 wmi-op 6 htt-op 4
cal pre-cal-file max-sta 32 raw 0 hwcrypto 1
[ 19.803176] ath10k_pci 0000:01:00.0: firmware register dump:
[ 19.810956] ath10k_pci 0000:01:00.0: [00]: 0x01000000 0x000015B3
0x009CBB38 0x00975B31
[ 19.816861] ath10k_pci 0000:01:00.0: [04]: 0x009CBB38 0x00060530
0x00000011 0x00415760
[ 19.824587] ath10k_pci 0000:01:00.0: [08]: 0x00417E6C 0x00400000
0x00000001 0x00422990
[ 19.832485] ath10k_pci 0000:01:00.0: [12]: 0x00000009 0xFFFFFFFF
0x00973B25 0x00973B47
[ 19.840384] ath10k_pci 0000:01:00.0: [16]: 0x009CBB38 0x000CEEA7
0x00000000 0x00000000
[ 19.848284] ath10k_pci 0000:01:00.0: [20]: 0x409CBB38 0x004068DC
0x00000001 0x00403628
[ 19.856183] ath10k_pci 0000:01:00.0: [24]: 0x809814EF 0x0040693C
0x00000049 0xC09CBB38
[ 19.864083] ath10k_pci 0000:01:00.0: [28]: 0x800DF216 0x004069AC
0x00000004 0x00415300
[ 19.871983] ath10k_pci 0000:01:00.0: [32]: 0x800C383A 0x004069DC
0x00415160 0x00400000
[ 19.879881] ath10k_pci 0000:01:00.0: [36]: 0x809800A3 0x00406A0C
0x00415170 0x009C41F8
[ 19.887781] ath10k_pci 0000:01:00.0: [40]: 0x8098003A 0x00406A5C
0x00400000 0x00400600
[ 19.895680] ath10k_pci 0000:01:00.0: [44]: 0x809607C1 0x00406A8C
0xD8400100 0x00406A9C
[ 19.903579] ath10k_pci 0000:01:00.0: [48]: 0x80960892 0x00406AAC
0x00000000 0x00000008
[ 19.911479] ath10k_pci 0000:01:00.0: [52]: 0x80960E39 0x00406ACC
0x00400000 0x00400600
[ 19.919378] ath10k_pci 0000:01:00.0: [56]: 0x80960E9D 0x00406AEC
0x00000000 0x00400600
[ 19.927277] ath10k_pci 0000:01:00.0: Copy Engine register dump:
[ 19.935181] ath10k_pci 0000:01:00.0: [00]: 0x0004a000 11 11 12 11
[ 19.940994] ath10k_pci 0000:01:00.0: [01]: 0x0004a400 11 11 10 11
[ 19.947590] ath10k_pci 0000:01:00.0: [02]: 0x0004a800 0 0 63 0
[ 19.954014] ath10k_pci 0000:01:00.0: [03]: 0x0004ac00 0 0 0 0
[ 19.960439] ath10k_pci 0000:01:00.0: [04]: 0x0004b000 0 0 0 0
[ 19.966862] ath10k_pci 0000:01:00.0: [05]: 0x0004b400 0 0 0 0
[ 19.973285] ath10k_pci 0000:01:00.0: [06]: 0x0004b800 0 0 0 0
[ 19.979709] ath10k_pci 0000:01:00.0: [07]: 0x0004bc00 1 1 1 1
[ 19.986132] ath10k_pci 0000:01:00.0: [08]: 0x0004c000 0 0 127 0
[ 19.992556] ath10k_pci 0000:01:00.0: [09]: 0x0004c400 1 1 1 1
[ 19.998980] ath10k_pci 0000:01:00.0: [10]: 0x0004c800 0 0 0 0
[ 20.005403] ath10k_pci 0000:01:00.0: [11]: 0x0004cc00 0 0 0 0
[ 20.795948] ath10k_pci 0000:01:00.0: failed to receive control
response completion, polling..
[ 21.835766] ath10k_pci 0000:01:00.0: ctl_resp never came in (-110)
[ 21.835810] ath10k_pci 0000:01:00.0: failed to connect to HTC: -110
[ 21.915174] ath10k_pci 0000:01:00.0: could not init core (-110)
[ 21.915620] ath10k_pci 0000:01:00.0: could not probe fw (-110)
[ 21.920266] ath10k_pci 0001:01:00.0: assign IRQ: got 100
[ 21.921197] ath10k_pci 0001:01:00.0: enabling device (0140 -> 0142)
[ 21.926032] ath10k_pci 0001:01:00.0: enabling bus mastering
[ 21.926715] ath10k_pci 0001:01:00.0: pci irq msi oper_irq_mode 2
irq_mode 0 reset_mode 0
[ 21.962217] ath10k_pci 0000:01:00.0: cannot restart a device that
hasn't been started
[ 22.104728] ath10k_pci 0001:01:00.0: Direct firmware load for
ath10k/pre-cal-pci-0001:01:00.0.bin failed with error -2
[ 22.104769] ath10k_pci 0001:01:00.0: Falling back to user helper
[ 22.424677] ath10k_pci 0001:01:00.0: Direct firmware load for
ath10k/QCA9984/hw1.0/firmware-6.bin failed with error -2
[ 22.424736] ath10k_pci 0001:01:00.0: Falling back to user helper
[ 22.462387] firmware ath10k!QCA9984!hw1.0!firmware-6.bin:
firmware_loading_store: map pages failed
[ 22.463844] ath10k_pci 0001:01:00.0: qca9984/qca9994 hw1.0 target
0x01000000 chip_id 0x00000000 sub 168c:cafe
[ 22.470250] ath10k_pci 0001:01:00.0: kconfig debug 0 debugfs 1
tracing 0 dfs 1 testmode 1
[ 22.483627] ath10k_pci 0001:01:00.0: firmware ver 10.4-3.5.3-00053
api 5 features no-p2p,mfp,peer-flow-ctrl,btcoex-param,allows-mesh-bcast,no-ps
crc32 4c56a386
[ 23.743494] ath10k_pci 0001:01:00.0: board_file api 2 bmi_id 0:31
crc32 dd6d039c
[ 27.528777] ath10k_pci 0001:01:00.0: firmware crashed! (guid
2112523e-3948-4925-b383-9e672937c6d5)
[ 27.528819] ath10k_pci 0001:01:00.0: qca9984/qca9994 hw1.0 target
0x01000000 chip_id 0x00000000 sub 168c:cafe
[ 27.536696] ath10k_pci 0001:01:00.0: kconfig debug 0 debugfs 1
tracing 0 dfs 1 testmode 1
[ 27.548985] ath10k_pci 0001:01:00.0: firmware ver 10.4-3.5.3-00053
api 5 features no-p2p,mfp,peer-flow-ctrl,btcoex-param,allows-mesh-bcast,no-ps
crc32 4c56a386
[ 27.555303] ath10k_pci 0001:01:00.0: board_file api 2 bmi_id 0:31
crc32 dd6d039c
[ 27.568835] ath10k_pci 0001:01:00.0: htt-ver 0.0 wmi-op 6 htt-op 4
cal pre-cal-file max-sta 32 raw 0 hwcrypto 1
[ 27.578512] ath10k_pci 0001:01:00.0: firmware register dump:
[ 27.586281] ath10k_pci 0001:01:00.0: [00]: 0x01000000 0x000015B3
0x009CBB38 0x00975B31
[ 27.592186] ath10k_pci 0001:01:00.0: [04]: 0x009CBB38 0x00060530
0x00000011 0x00415760
[ 27.599910] ath10k_pci 0001:01:00.0: [08]: 0x00417E6C 0x00400000
0x00000001 0x00422990
[ 27.607809] ath10k_pci 0001:01:00.0: [12]: 0x00000009 0xFFFFFFFF
0x00973B25 0x00973B47
[ 27.615708] ath10k_pci 0001:01:00.0: [16]: 0x009CBB38 0x000CEEAC
0x00000000 0x00000000
[ 27.623608] ath10k_pci 0001:01:00.0: [20]: 0x409CBB38 0x004068DC
0x00000001 0x00403628
[ 27.631507] ath10k_pci 0001:01:00.0: [24]: 0x809814EF 0x0040693C
0x00000049 0xC09CBB38
[ 27.639405] ath10k_pci 0001:01:00.0: [28]: 0x800DF216 0x004069AC
0x00000004 0x00415300
[ 27.647305] ath10k_pci 0001:01:00.0: [32]: 0x800C383A 0x004069DC
0x00415160 0x00400000
[ 27.655205] ath10k_pci 0001:01:00.0: [36]: 0x809800A3 0x00406A0C
0x00415170 0x009C41F8
[ 27.663104] ath10k_pci 0001:01:00.0: [40]: 0x8098003A 0x00406A5C
0x00400000 0x00400600
[ 27.671004] ath10k_pci 0001:01:00.0: [44]: 0x809607C1 0x00406A8C
0xD8400100 0x00406A9C
[ 27.678902] ath10k_pci 0001:01:00.0: [48]: 0x80960892 0x00406AAC
0x00000000 0x00000008
[ 27.686801] ath10k_pci 0001:01:00.0: [52]: 0x80960E39 0x00406ACC
0x00400000 0x00400600
[ 27.694700] ath10k_pci 0001:01:00.0: [56]: 0x80960E9D 0x00406AEC
0x00000000 0x00400600
[ 27.702603] ath10k_pci 0001:01:00.0: Copy Engine register dump:
[ 27.710506] ath10k_pci 0001:01:00.0: [00]: 0x0004a000 11 11 12 11
[ 27.716322] ath10k_pci 0001:01:00.0: [01]: 0x0004a400 11 11 10 11
[ 27.722917] ath10k_pci 0001:01:00.0: [02]: 0x0004a800 0 0 63 0
[ 27.729340] ath10k_pci 0001:01:00.0: [03]: 0x0004ac00 0 0 0 0
[ 27.735764] ath10k_pci 0001:01:00.0: [04]: 0x0004b000 0 0 0 0
[ 27.742188] ath10k_pci 0001:01:00.0: [05]: 0x0004b400 0 0 0 0
[ 27.748611] ath10k_pci 0001:01:00.0: [06]: 0x0004b800 0 0 0 0
[ 27.755035] ath10k_pci 0001:01:00.0: [07]: 0x0004bc00 1 1 1 1
[ 27.761459] ath10k_pci 0001:01:00.0: [08]: 0x0004c000 0 0 127 0
[ 27.767884] ath10k_pci 0001:01:00.0: [09]: 0x0004c400 1 1 1 1
[ 27.774304] ath10k_pci 0001:01:00.0: [10]: 0x0004c800 0 0 0 0
[ 27.780731] ath10k_pci 0001:01:00.0: [11]: 0x0004cc00 0 0 0 0
[ 28.567840] ath10k_pci 0001:01:00.0: failed to receive control
response completion, polling..
[ 29.616315] ath10k_pci 0001:01:00.0: ctl_resp never came in (-110)
[ 29.616341] ath10k_pci 0001:01:00.0: failed to connect to HTC: -110
[ 29.695567] ath10k_pci 0001:01:00.0: could not init core (-110)
[ 29.695988] ath10k_pci 0001:01:00.0: could not probe fw (-110)
[ 29.703824] kmodloader: done loading kernel modules from /etc/modules.d/*
[ 29.732245] ath10k_pci 0001:01:00.0: cannot restart a device that
hasn't been started
Replacing stock firmware with latest from kvalo github (here :
https://github.com/kvalo/ath10k-firmware/tree/master/QCA9984/hw1.0/3.6.0.1)
I get the same result
Dmesg is :
[ 235.442819] ath10k_pci 0001:01:00.0: disabling bus mastering
[ 235.482588] ath10k_pci 0000:01:00.0: disabling bus mastering
[ 260.586372] ath10k_pci 0000:01:00.0: assign IRQ: got 67
[ 260.586771] ath10k_pci 0000:01:00.0: enabling bus mastering
[ 260.587218] ath10k_pci 0000:01:00.0: pci irq msi oper_irq_mode 2
irq_mode 0 reset_mode 0
[ 260.754869] ath10k_pci 0000:01:00.0: Direct firmware load for
ath10k/QCA9984/hw1.0/firmware-6.bin failed with error -2
[ 260.754917] ath10k_pci 0000:01:00.0: Falling back to user helper
[ 260.786271] firmware ath10k!QCA9984!hw1.0!firmware-6.bin:
firmware_loading_store: map pages failed
[ 260.787219] ath10k_pci 0000:01:00.0: qca9984/qca9994 hw1.0 target
0x01000000 chip_id 0x00000000 sub 168c:cafe
[ 260.794202] ath10k_pci 0000:01:00.0: kconfig debug 0 debugfs 1
tracing 0 dfs 1 testmode 1
[ 260.806246] ath10k_pci 0000:01:00.0: firmware ver
10.4-3.6.0.1-00003 api 5 features
no-p2p,mfp,peer-flow-ctrl,btcoex-param,allows-mesh-bcast,no-ps crc32
266d70b0
[ 262.065148] ath10k_pci 0000:01:00.0: board_file api 2 bmi_id 0:31
crc32 dd6d039c
[ 265.858256] ath10k_pci 0000:01:00.0: firmware crashed! (guid
2b6addfc-915e-437a-a7fa-3691cbf4b39e)
[ 265.858347] ath10k_pci 0000:01:00.0: qca9984/qca9994 hw1.0 target
0x01000000 chip_id 0x00000000 sub 168c:cafe
[ 265.866136] ath10k_pci 0000:01:00.0: kconfig debug 0 debugfs 1
tracing 0 dfs 1 testmode 1
[ 265.881167] ath10k_pci 0000:01:00.0: firmware ver
10.4-3.6.0.1-00003 api 5 features
no-p2p,mfp,peer-flow-ctrl,btcoex-param,allows-mesh-bcast,no-ps crc32
266d70b0
[ 265.885460] ath10k_pci 0000:01:00.0: board_file api 2 bmi_id 0:31
crc32 dd6d039c
[ 265.898696] ath10k_pci 0000:01:00.0: htt-ver 0.0 wmi-op 6 htt-op 4
cal pre-cal-file max-sta 32 raw 0 hwcrypto 1
[ 265.908193] ath10k_pci 0000:01:00.0: firmware register dump:
[ 265.915961] ath10k_pci 0000:01:00.0: [00]: 0x01000000 0x000015B3
0x009CC074 0x00975B31
[ 265.921864] ath10k_pci 0000:01:00.0: [04]: 0x009CC074 0x00060530
0x00000011 0x004142FC
[ 265.929590] ath10k_pci 0000:01:00.0: [08]: 0x00416AFC 0x00400000
0x00000001 0x00421F90
[ 265.937488] ath10k_pci 0000:01:00.0: [12]: 0x00000009 0xFFFFFFFF
0x00973B25 0x00973B47
[ 265.945389] ath10k_pci 0000:01:00.0: [16]: 0x009CC074 0x000CFE13
0x00000000 0x00000000
[ 265.953289] ath10k_pci 0000:01:00.0: [20]: 0x409CC074 0x004068DC
0x00000001 0x00403628
[ 265.961187] ath10k_pci 0000:01:00.0: [24]: 0x8098153B 0x0040693C
0x0000004E 0xC09CC074
[ 265.969087] ath10k_pci 0000:01:00.0: [28]: 0x800E026F 0x004069AC
0x00000004 0x00413E60
[ 265.976984] ath10k_pci 0000:01:00.0: [32]: 0x800C383A 0x004069DC
0x00413CB0 0x00400000
[ 265.984884] ath10k_pci 0000:01:00.0: [36]: 0x809800A3 0x00406A0C
0x00413CC0 0x009C4750
[ 265.992784] ath10k_pci 0000:01:00.0: [40]: 0x8098003A 0x00406A5C
0x00400000 0x00400600
[ 266.000684] ath10k_pci 0000:01:00.0: [44]: 0x809607C1 0x00406A8C
0xD8400100 0x00406A9C
[ 266.008582] ath10k_pci 0000:01:00.0: [48]: 0x80960892 0x00406AAC
0x00000000 0x00000008
[ 266.016482] ath10k_pci 0000:01:00.0: [52]: 0x80960E39 0x00406ACC
0x00400000 0x00400600
[ 266.024381] ath10k_pci 0000:01:00.0: [56]: 0x80960E9D 0x00406AEC
0x00000000 0x00400600
[ 266.032279] ath10k_pci 0000:01:00.0: Copy Engine register dump:
[ 266.040186] ath10k_pci 0000:01:00.0: [00]: 0x0004a000 12 12 29 28
[ 266.045999] ath10k_pci 0000:01:00.0: [01]: 0x0004a400 11 11 10 11
[ 266.052595] ath10k_pci 0000:01:00.0: [02]: 0x0004a800 0 0 63 0
[ 266.059018] ath10k_pci 0000:01:00.0: [03]: 0x0004ac00 0 0 0 0
[ 266.065441] ath10k_pci 0000:01:00.0: [04]: 0x0004b000 0 0 0 0
[ 266.071865] ath10k_pci 0000:01:00.0: [05]: 0x0004b400 0 0 0 0
[ 266.078289] ath10k_pci 0000:01:00.0: [06]: 0x0004b800 0 0 0 0
[ 266.084713] ath10k_pci 0000:01:00.0: [07]: 0x0004bc00 1 1 1 1
[ 266.091136] ath10k_pci 0000:01:00.0: [08]: 0x0004c000 0 0 127 0
[ 266.097559] ath10k_pci 0000:01:00.0: [09]: 0x0004c400 1 1 1 1
[ 266.103982] ath10k_pci 0000:01:00.0: [10]: 0x0004c800 0 0 0 0
[ 266.110408] ath10k_pci 0000:01:00.0: [11]: 0x0004cc00 0 0 0 0
[ 266.876609] ath10k_pci 0000:01:00.0: failed to receive control
response completion, polling..
[ 267.915918] ath10k_pci 0000:01:00.0: ctl_resp never came in (-110)
[ 267.915970] ath10k_pci 0000:01:00.0: failed to connect to HTC: -110
[ 267.996406] ath10k_pci 0000:01:00.0: could not init core (-110)
[ 267.996972] ath10k_pci 0000:01:00.0: could not probe fw (-110)
[ 268.001578] ath10k_pci 0001:01:00.0: assign IRQ: got 100
[ 268.002612] ath10k_pci 0001:01:00.0: enabling bus mastering
[ 268.003292] ath10k_pci 0001:01:00.0: pci irq msi oper_irq_mode 2
irq_mode 0 reset_mode 0
[ 268.032241] ath10k_pci 0000:01:00.0: cannot restart a device that
hasn't been started
[ 268.174893] ath10k_pci 0001:01:00.0: Direct firmware load for
ath10k/QCA9984/hw1.0/firmware-6.bin failed with error -2
[ 268.174936] ath10k_pci 0001:01:00.0: Falling back to user helper
[ 268.206575] firmware ath10k!QCA9984!hw1.0!firmware-6.bin:
firmware_loading_store: map pages failed
[ 268.207955] ath10k_pci 0001:01:00.0: qca9984/qca9994 hw1.0 target
0x01000000 chip_id 0x00000000 sub 168c:cafe
[ 268.214521] ath10k_pci 0001:01:00.0: kconfig debug 0 debugfs 1
tracing 0 dfs 1 testmode 1
[ 268.227852] ath10k_pci 0001:01:00.0: firmware ver
10.4-3.6.0.1-00003 api 5 features
no-p2p,mfp,peer-flow-ctrl,btcoex-param,allows-mesh-bcast,no-ps crc32
266d70b0
[ 269.485480] ath10k_pci 0001:01:00.0: board_file api 2 bmi_id 0:31
crc32 dd6d039c
[ 273.282901] ath10k_pci 0001:01:00.0: firmware crashed! (guid
28f0a68b-f881-40cb-b515-f4320b412b7a)
[ 273.282982] ath10k_pci 0001:01:00.0: qca9984/qca9994 hw1.0 target
0x01000000 chip_id 0x00000000 sub 168c:cafe
[ 273.290780] ath10k_pci 0001:01:00.0: kconfig debug 0 debugfs 1
tracing 0 dfs 1 testmode 1
[ 273.306323] ath10k_pci 0001:01:00.0: firmware ver
10.4-3.6.0.1-00003 api 5 features
no-p2p,mfp,peer-flow-ctrl,btcoex-param,allows-mesh-bcast,no-ps crc32
266d70b0
[ 273.310039] ath10k_pci 0001:01:00.0: board_file api 2 bmi_id 0:31
crc32 dd6d039c
[ 273.323420] ath10k_pci 0001:01:00.0: htt-ver 0.0 wmi-op 6 htt-op 4
cal pre-cal-file max-sta 32 raw 0 hwcrypto 1
[ 273.332841] ath10k_pci 0001:01:00.0: firmware register dump:
[ 273.340604] ath10k_pci 0001:01:00.0: [00]: 0x01000000 0x000015B3
0x009CC074 0x00975B31
[ 273.346508] ath10k_pci 0001:01:00.0: [04]: 0x009CC074 0x00060530
0x00000011 0x004142FC
[ 273.354234] ath10k_pci 0001:01:00.0: [08]: 0x00416AFC 0x00400000
0x00000001 0x00421F90
[ 273.362135] ath10k_pci 0001:01:00.0: [12]: 0x00000009 0xFFFFFFFF
0x00973B25 0x00973B47
[ 273.370033] ath10k_pci 0001:01:00.0: [16]: 0x009CC074 0x000CFE13
0x00000000 0x00000000
[ 273.377932] ath10k_pci 0001:01:00.0: [20]: 0x409CC074 0x004068DC
0x00000001 0x00403628
[ 273.385833] ath10k_pci 0001:01:00.0: [24]: 0x8098153B 0x0040693C
0x0000004E 0xC09CC074
[ 273.393732] ath10k_pci 0001:01:00.0: [28]: 0x800E026F 0x004069AC
0x00000004 0x00413E60
[ 273.401631] ath10k_pci 0001:01:00.0: [32]: 0x800C383A 0x004069DC
0x00413CB0 0x00400000
[ 273.409529] ath10k_pci 0001:01:00.0: [36]: 0x809800A3 0x00406A0C
0x00413CC0 0x009C4750
[ 273.417429] ath10k_pci 0001:01:00.0: [40]: 0x8098003A 0x00406A5C
0x00400000 0x00400600
[ 273.425329] ath10k_pci 0001:01:00.0: [44]: 0x809607C1 0x00406A8C
0xD8400100 0x00406A9C
[ 273.433227] ath10k_pci 0001:01:00.0: [48]: 0x80960892 0x00406AAC
0x00000000 0x00000008
[ 273.441127] ath10k_pci 0001:01:00.0: [52]: 0x80960E39 0x00406ACC
0x00400000 0x00400600
[ 273.449027] ath10k_pci 0001:01:00.0: [56]: 0x80960E9D 0x00406AEC
0x00000000 0x00400600
[ 273.456924] ath10k_pci 0001:01:00.0: Copy Engine register dump:
[ 273.464831] ath10k_pci 0001:01:00.0: [00]: 0x0004a000 12 12 29 28
[ 273.470647] ath10k_pci 0001:01:00.0: [01]: 0x0004a400 11 11 10 11
[ 273.477243] ath10k_pci 0001:01:00.0: [02]: 0x0004a800 0 0 63 0
[ 273.483664] ath10k_pci 0001:01:00.0: [03]: 0x0004ac00 0 0 0 0
[ 273.490088] ath10k_pci 0001:01:00.0: [04]: 0x0004b000 0 0 0 0
[ 273.496512] ath10k_pci 0001:01:00.0: [05]: 0x0004b400 0 0 0 0
[ 273.502936] ath10k_pci 0001:01:00.0: [06]: 0x0004b800 0 0 0 0
[ 273.509360] ath10k_pci 0001:01:00.0: [07]: 0x0004bc00 1 1 1 1
[ 273.515783] ath10k_pci 0001:01:00.0: [08]: 0x0004c000 0 0 127 0
[ 273.522208] ath10k_pci 0001:01:00.0: [09]: 0x0004c400 1 1 1 1
[ 273.528632] ath10k_pci 0001:01:00.0: [10]: 0x0004c800 0 0 0 0
[ 273.535054] ath10k_pci 0001:01:00.0: [11]: 0x0004cc00 0 0 0 0
[ 274.326491] ath10k_pci 0001:01:00.0: failed to receive control
response completion, polling..
[ 275.356625] ath10k_pci 0001:01:00.0: ctl_resp never came in (-110)
[ 275.356672] ath10k_pci 0001:01:00.0: failed to connect to HTC: -110
[ 275.436389] ath10k_pci 0001:01:00.0: could not init core (-110)
[ 275.436925] ath10k_pci 0001:01:00.0: could not probe fw (-110)
[ 275.472295] ath10k_pci 0001:01:00.0: cannot restart a device that
hasn't been started
Various tests with others firmware from candelatech , stock LEDE 17.01
or dd-wrt give me firmware crash also
I already tried to enable debug info for firmware crash with 'rmmod
ath10k_pci; rmmod ath10k_core; modprobe ath10k_core
debug_mask=0xffffffff ; modprobe ath10k_pci ' but without success
Flashing back netgear factory firmware is OK, and all is functionnal
What can I do next ?
Thanks all
On 09/19/2018 01:56 PM, Bruno Rosset wrote:
> Hi,
>
> Done, thanks
> Le mer. 19 sept. 2018 à 22:45, Ben Greear <[email protected]> a écrit :
>>
>> On 09/19/2018 01:37 PM, Bruno Rosset wrote:
>>> Hi all,
>>>
>>
>>> Various tests with others firmware from candelatech , stock LEDE 17.01
>>> or dd-wrt give me firmware crash also
The crash in my firmware decodes to something that looks probably like
the calibration data is wrong.
This is probably some issue with how the board data is selected, or maybe
the wrong board data is installed on the file system.
Thanks,
Ben
>>
>> Please open a bug for the candela firmware crash, I might be able to figure
>> out why it crashes:
>>
>> https://github.com/greearb/ath10k-ct/issues
>>
>> https://www.candelatech.com/ath10k-bugs.php
>>
>> Thanks,
>> Ben
>>
>>
>> --
>> Ben Greear <[email protected]>
>> Candela Technologies Inc http://www.candelatech.com
>>
>
--
Ben Greear <[email protected]>
Candela Technologies Inc http://www.candelatech.com
On 09/19/2018 01:37 PM, Bruno Rosset wrote:
> Hi all,
>
> Various tests with others firmware from candelatech , stock LEDE 17.01
> or dd-wrt give me firmware crash also
Please open a bug for the candela firmware crash, I might be able to figure
out why it crashes:
https://github.com/greearb/ath10k-ct/issues
https://www.candelatech.com/ath10k-bugs.php
Thanks,
Ben
--
Ben Greear <[email protected]>
Candela Technologies Inc http://www.candelatech.com
can you tell me how to reproduce this crash? i have 2 r7800 running with
dd-wrt but no crashes
Am 19.09.2018 um 22:37 schrieb Bruno Rosset:
> Hi all,
>
> I get a firmware crash using latest openwrt 18.06.1 on the Netgear
> R7800 with stock firmware
> Dmesg is :
> [ 13.804366] ath10k_pci 0000:01:00.0: assign IRQ: got 67
> [ 13.804805] ath10k_pci 0000:01:00.0: enabling device (0140 -> 0142)
> [ 13.804887] ath10k_pci 0000:01:00.0: enabling bus mastering
> [ 13.805346] ath10k_pci 0000:01:00.0: pci irq msi oper_irq_mode 2
> irq_mode 0 reset_mode 0
> [ 13.974787] ath10k_pci 0000:01:00.0: Direct firmware load for
> ath10k/pre-cal-pci-0000:01:00.0.bin failed with error -2
> [ 13.974827] ath10k_pci 0000:01:00.0: Falling back to user helper
> [ 14.304794] ath10k_pci 0000:01:00.0: Direct firmware load for
> ath10k/QCA9984/hw1.0/firmware-6.bin failed with error -2
> [ 14.304857] ath10k_pci 0000:01:00.0: Falling back to user helper
> [ 14.337111] firmware ath10k!QCA9984!hw1.0!firmware-6.bin:
> firmware_loading_store: map pages failed
> [ 14.702947] ath10k_pci 0000:01:00.0: qca9984/qca9994 hw1.0 target
> 0x01000000 chip_id 0x00000000 sub 168c:cafe
> [ 14.702997] ath10k_pci 0000:01:00.0: kconfig debug 0 debugfs 1
> tracing 0 dfs 1 testmode 1
> [ 14.716459] ath10k_pci 0000:01:00.0: firmware ver 10.4-3.5.3-00053
> api 5 features no-p2p,mfp,peer-flow-ctrl,btcoex-param,allows-mesh-bcast,no-ps
> crc32 4c56a386
> [ 15.973104] ath10k_pci 0000:01:00.0: board_file api 2 bmi_id 0:31
> crc32 dd6d039c
> [ 19.753460] ath10k_pci 0000:01:00.0: firmware crashed! (guid
> ca7089d2-df9a-4f9d-8fa6-d1b908cf3220)
> [ 19.753494] ath10k_pci 0000:01:00.0: qca9984/qca9994 hw1.0 target
> 0x01000000 chip_id 0x00000000 sub 168c:cafe
> [ 19.761307] ath10k_pci 0000:01:00.0: kconfig debug 0 debugfs 1
> tracing 0 dfs 1 testmode 1
> [ 19.773202] ath10k_pci 0000:01:00.0: firmware ver 10.4-3.5.3-00053
> api 5 features no-p2p,mfp,peer-flow-ctrl,btcoex-param,allows-mesh-bcast,no-ps
> crc32 4c56a386
> [ 19.779887] ath10k_pci 0000:01:00.0: board_file api 2 bmi_id 0:31
> crc32 dd6d039c
> [ 19.793511] ath10k_pci 0000:01:00.0: htt-ver 0.0 wmi-op 6 htt-op 4
> cal pre-cal-file max-sta 32 raw 0 hwcrypto 1
> [ 19.803176] ath10k_pci 0000:01:00.0: firmware register dump:
> [ 19.810956] ath10k_pci 0000:01:00.0: [00]: 0x01000000 0x000015B3
> 0x009CBB38 0x00975B31
> [ 19.816861] ath10k_pci 0000:01:00.0: [04]: 0x009CBB38 0x00060530
> 0x00000011 0x00415760
> [ 19.824587] ath10k_pci 0000:01:00.0: [08]: 0x00417E6C 0x00400000
> 0x00000001 0x00422990
> [ 19.832485] ath10k_pci 0000:01:00.0: [12]: 0x00000009 0xFFFFFFFF
> 0x00973B25 0x00973B47
> [ 19.840384] ath10k_pci 0000:01:00.0: [16]: 0x009CBB38 0x000CEEA7
> 0x00000000 0x00000000
> [ 19.848284] ath10k_pci 0000:01:00.0: [20]: 0x409CBB38 0x004068DC
> 0x00000001 0x00403628
> [ 19.856183] ath10k_pci 0000:01:00.0: [24]: 0x809814EF 0x0040693C
> 0x00000049 0xC09CBB38
> [ 19.864083] ath10k_pci 0000:01:00.0: [28]: 0x800DF216 0x004069AC
> 0x00000004 0x00415300
> [ 19.871983] ath10k_pci 0000:01:00.0: [32]: 0x800C383A 0x004069DC
> 0x00415160 0x00400000
> [ 19.879881] ath10k_pci 0000:01:00.0: [36]: 0x809800A3 0x00406A0C
> 0x00415170 0x009C41F8
> [ 19.887781] ath10k_pci 0000:01:00.0: [40]: 0x8098003A 0x00406A5C
> 0x00400000 0x00400600
> [ 19.895680] ath10k_pci 0000:01:00.0: [44]: 0x809607C1 0x00406A8C
> 0xD8400100 0x00406A9C
> [ 19.903579] ath10k_pci 0000:01:00.0: [48]: 0x80960892 0x00406AAC
> 0x00000000 0x00000008
> [ 19.911479] ath10k_pci 0000:01:00.0: [52]: 0x80960E39 0x00406ACC
> 0x00400000 0x00400600
> [ 19.919378] ath10k_pci 0000:01:00.0: [56]: 0x80960E9D 0x00406AEC
> 0x00000000 0x00400600
> [ 19.927277] ath10k_pci 0000:01:00.0: Copy Engine register dump:
> [ 19.935181] ath10k_pci 0000:01:00.0: [00]: 0x0004a000 11 11 12 11
> [ 19.940994] ath10k_pci 0000:01:00.0: [01]: 0x0004a400 11 11 10 11
> [ 19.947590] ath10k_pci 0000:01:00.0: [02]: 0x0004a800 0 0 63 0
> [ 19.954014] ath10k_pci 0000:01:00.0: [03]: 0x0004ac00 0 0 0 0
> [ 19.960439] ath10k_pci 0000:01:00.0: [04]: 0x0004b000 0 0 0 0
> [ 19.966862] ath10k_pci 0000:01:00.0: [05]: 0x0004b400 0 0 0 0
> [ 19.973285] ath10k_pci 0000:01:00.0: [06]: 0x0004b800 0 0 0 0
> [ 19.979709] ath10k_pci 0000:01:00.0: [07]: 0x0004bc00 1 1 1 1
> [ 19.986132] ath10k_pci 0000:01:00.0: [08]: 0x0004c000 0 0 127 0
> [ 19.992556] ath10k_pci 0000:01:00.0: [09]: 0x0004c400 1 1 1 1
> [ 19.998980] ath10k_pci 0000:01:00.0: [10]: 0x0004c800 0 0 0 0
> [ 20.005403] ath10k_pci 0000:01:00.0: [11]: 0x0004cc00 0 0 0 0
> [ 20.795948] ath10k_pci 0000:01:00.0: failed to receive control
> response completion, polling..
> [ 21.835766] ath10k_pci 0000:01:00.0: ctl_resp never came in (-110)
> [ 21.835810] ath10k_pci 0000:01:00.0: failed to connect to HTC: -110
> [ 21.915174] ath10k_pci 0000:01:00.0: could not init core (-110)
> [ 21.915620] ath10k_pci 0000:01:00.0: could not probe fw (-110)
> [ 21.920266] ath10k_pci 0001:01:00.0: assign IRQ: got 100
> [ 21.921197] ath10k_pci 0001:01:00.0: enabling device (0140 -> 0142)
> [ 21.926032] ath10k_pci 0001:01:00.0: enabling bus mastering
> [ 21.926715] ath10k_pci 0001:01:00.0: pci irq msi oper_irq_mode 2
> irq_mode 0 reset_mode 0
> [ 21.962217] ath10k_pci 0000:01:00.0: cannot restart a device that
> hasn't been started
> [ 22.104728] ath10k_pci 0001:01:00.0: Direct firmware load for
> ath10k/pre-cal-pci-0001:01:00.0.bin failed with error -2
> [ 22.104769] ath10k_pci 0001:01:00.0: Falling back to user helper
> [ 22.424677] ath10k_pci 0001:01:00.0: Direct firmware load for
> ath10k/QCA9984/hw1.0/firmware-6.bin failed with error -2
> [ 22.424736] ath10k_pci 0001:01:00.0: Falling back to user helper
> [ 22.462387] firmware ath10k!QCA9984!hw1.0!firmware-6.bin:
> firmware_loading_store: map pages failed
> [ 22.463844] ath10k_pci 0001:01:00.0: qca9984/qca9994 hw1.0 target
> 0x01000000 chip_id 0x00000000 sub 168c:cafe
> [ 22.470250] ath10k_pci 0001:01:00.0: kconfig debug 0 debugfs 1
> tracing 0 dfs 1 testmode 1
> [ 22.483627] ath10k_pci 0001:01:00.0: firmware ver 10.4-3.5.3-00053
> api 5 features no-p2p,mfp,peer-flow-ctrl,btcoex-param,allows-mesh-bcast,no-ps
> crc32 4c56a386
> [ 23.743494] ath10k_pci 0001:01:00.0: board_file api 2 bmi_id 0:31
> crc32 dd6d039c
> [ 27.528777] ath10k_pci 0001:01:00.0: firmware crashed! (guid
> 2112523e-3948-4925-b383-9e672937c6d5)
> [ 27.528819] ath10k_pci 0001:01:00.0: qca9984/qca9994 hw1.0 target
> 0x01000000 chip_id 0x00000000 sub 168c:cafe
> [ 27.536696] ath10k_pci 0001:01:00.0: kconfig debug 0 debugfs 1
> tracing 0 dfs 1 testmode 1
> [ 27.548985] ath10k_pci 0001:01:00.0: firmware ver 10.4-3.5.3-00053
> api 5 features no-p2p,mfp,peer-flow-ctrl,btcoex-param,allows-mesh-bcast,no-ps
> crc32 4c56a386
> [ 27.555303] ath10k_pci 0001:01:00.0: board_file api 2 bmi_id 0:31
> crc32 dd6d039c
> [ 27.568835] ath10k_pci 0001:01:00.0: htt-ver 0.0 wmi-op 6 htt-op 4
> cal pre-cal-file max-sta 32 raw 0 hwcrypto 1
> [ 27.578512] ath10k_pci 0001:01:00.0: firmware register dump:
> [ 27.586281] ath10k_pci 0001:01:00.0: [00]: 0x01000000 0x000015B3
> 0x009CBB38 0x00975B31
> [ 27.592186] ath10k_pci 0001:01:00.0: [04]: 0x009CBB38 0x00060530
> 0x00000011 0x00415760
> [ 27.599910] ath10k_pci 0001:01:00.0: [08]: 0x00417E6C 0x00400000
> 0x00000001 0x00422990
> [ 27.607809] ath10k_pci 0001:01:00.0: [12]: 0x00000009 0xFFFFFFFF
> 0x00973B25 0x00973B47
> [ 27.615708] ath10k_pci 0001:01:00.0: [16]: 0x009CBB38 0x000CEEAC
> 0x00000000 0x00000000
> [ 27.623608] ath10k_pci 0001:01:00.0: [20]: 0x409CBB38 0x004068DC
> 0x00000001 0x00403628
> [ 27.631507] ath10k_pci 0001:01:00.0: [24]: 0x809814EF 0x0040693C
> 0x00000049 0xC09CBB38
> [ 27.639405] ath10k_pci 0001:01:00.0: [28]: 0x800DF216 0x004069AC
> 0x00000004 0x00415300
> [ 27.647305] ath10k_pci 0001:01:00.0: [32]: 0x800C383A 0x004069DC
> 0x00415160 0x00400000
> [ 27.655205] ath10k_pci 0001:01:00.0: [36]: 0x809800A3 0x00406A0C
> 0x00415170 0x009C41F8
> [ 27.663104] ath10k_pci 0001:01:00.0: [40]: 0x8098003A 0x00406A5C
> 0x00400000 0x00400600
> [ 27.671004] ath10k_pci 0001:01:00.0: [44]: 0x809607C1 0x00406A8C
> 0xD8400100 0x00406A9C
> [ 27.678902] ath10k_pci 0001:01:00.0: [48]: 0x80960892 0x00406AAC
> 0x00000000 0x00000008
> [ 27.686801] ath10k_pci 0001:01:00.0: [52]: 0x80960E39 0x00406ACC
> 0x00400000 0x00400600
> [ 27.694700] ath10k_pci 0001:01:00.0: [56]: 0x80960E9D 0x00406AEC
> 0x00000000 0x00400600
> [ 27.702603] ath10k_pci 0001:01:00.0: Copy Engine register dump:
> [ 27.710506] ath10k_pci 0001:01:00.0: [00]: 0x0004a000 11 11 12 11
> [ 27.716322] ath10k_pci 0001:01:00.0: [01]: 0x0004a400 11 11 10 11
> [ 27.722917] ath10k_pci 0001:01:00.0: [02]: 0x0004a800 0 0 63 0
> [ 27.729340] ath10k_pci 0001:01:00.0: [03]: 0x0004ac00 0 0 0 0
> [ 27.735764] ath10k_pci 0001:01:00.0: [04]: 0x0004b000 0 0 0 0
> [ 27.742188] ath10k_pci 0001:01:00.0: [05]: 0x0004b400 0 0 0 0
> [ 27.748611] ath10k_pci 0001:01:00.0: [06]: 0x0004b800 0 0 0 0
> [ 27.755035] ath10k_pci 0001:01:00.0: [07]: 0x0004bc00 1 1 1 1
> [ 27.761459] ath10k_pci 0001:01:00.0: [08]: 0x0004c000 0 0 127 0
> [ 27.767884] ath10k_pci 0001:01:00.0: [09]: 0x0004c400 1 1 1 1
> [ 27.774304] ath10k_pci 0001:01:00.0: [10]: 0x0004c800 0 0 0 0
> [ 27.780731] ath10k_pci 0001:01:00.0: [11]: 0x0004cc00 0 0 0 0
> [ 28.567840] ath10k_pci 0001:01:00.0: failed to receive control
> response completion, polling..
> [ 29.616315] ath10k_pci 0001:01:00.0: ctl_resp never came in (-110)
> [ 29.616341] ath10k_pci 0001:01:00.0: failed to connect to HTC: -110
> [ 29.695567] ath10k_pci 0001:01:00.0: could not init core (-110)
> [ 29.695988] ath10k_pci 0001:01:00.0: could not probe fw (-110)
> [ 29.703824] kmodloader: done loading kernel modules from /etc/modules.d/*
> [ 29.732245] ath10k_pci 0001:01:00.0: cannot restart a device that
> hasn't been started
>
> Replacing stock firmware with latest from kvalo github (here :
> https://github.com/kvalo/ath10k-firmware/tree/master/QCA9984/hw1.0/3.6.0.1)
> I get the same result
> Dmesg is :
> [ 235.442819] ath10k_pci 0001:01:00.0: disabling bus mastering
> [ 235.482588] ath10k_pci 0000:01:00.0: disabling bus mastering
> [ 260.586372] ath10k_pci 0000:01:00.0: assign IRQ: got 67
> [ 260.586771] ath10k_pci 0000:01:00.0: enabling bus mastering
> [ 260.587218] ath10k_pci 0000:01:00.0: pci irq msi oper_irq_mode 2
> irq_mode 0 reset_mode 0
> [ 260.754869] ath10k_pci 0000:01:00.0: Direct firmware load for
> ath10k/QCA9984/hw1.0/firmware-6.bin failed with error -2
> [ 260.754917] ath10k_pci 0000:01:00.0: Falling back to user helper
> [ 260.786271] firmware ath10k!QCA9984!hw1.0!firmware-6.bin:
> firmware_loading_store: map pages failed
> [ 260.787219] ath10k_pci 0000:01:00.0: qca9984/qca9994 hw1.0 target
> 0x01000000 chip_id 0x00000000 sub 168c:cafe
> [ 260.794202] ath10k_pci 0000:01:00.0: kconfig debug 0 debugfs 1
> tracing 0 dfs 1 testmode 1
> [ 260.806246] ath10k_pci 0000:01:00.0: firmware ver
> 10.4-3.6.0.1-00003 api 5 features
> no-p2p,mfp,peer-flow-ctrl,btcoex-param,allows-mesh-bcast,no-ps crc32
> 266d70b0
> [ 262.065148] ath10k_pci 0000:01:00.0: board_file api 2 bmi_id 0:31
> crc32 dd6d039c
> [ 265.858256] ath10k_pci 0000:01:00.0: firmware crashed! (guid
> 2b6addfc-915e-437a-a7fa-3691cbf4b39e)
> [ 265.858347] ath10k_pci 0000:01:00.0: qca9984/qca9994 hw1.0 target
> 0x01000000 chip_id 0x00000000 sub 168c:cafe
> [ 265.866136] ath10k_pci 0000:01:00.0: kconfig debug 0 debugfs 1
> tracing 0 dfs 1 testmode 1
> [ 265.881167] ath10k_pci 0000:01:00.0: firmware ver
> 10.4-3.6.0.1-00003 api 5 features
> no-p2p,mfp,peer-flow-ctrl,btcoex-param,allows-mesh-bcast,no-ps crc32
> 266d70b0
> [ 265.885460] ath10k_pci 0000:01:00.0: board_file api 2 bmi_id 0:31
> crc32 dd6d039c
> [ 265.898696] ath10k_pci 0000:01:00.0: htt-ver 0.0 wmi-op 6 htt-op 4
> cal pre-cal-file max-sta 32 raw 0 hwcrypto 1
> [ 265.908193] ath10k_pci 0000:01:00.0: firmware register dump:
> [ 265.915961] ath10k_pci 0000:01:00.0: [00]: 0x01000000 0x000015B3
> 0x009CC074 0x00975B31
> [ 265.921864] ath10k_pci 0000:01:00.0: [04]: 0x009CC074 0x00060530
> 0x00000011 0x004142FC
> [ 265.929590] ath10k_pci 0000:01:00.0: [08]: 0x00416AFC 0x00400000
> 0x00000001 0x00421F90
> [ 265.937488] ath10k_pci 0000:01:00.0: [12]: 0x00000009 0xFFFFFFFF
> 0x00973B25 0x00973B47
> [ 265.945389] ath10k_pci 0000:01:00.0: [16]: 0x009CC074 0x000CFE13
> 0x00000000 0x00000000
> [ 265.953289] ath10k_pci 0000:01:00.0: [20]: 0x409CC074 0x004068DC
> 0x00000001 0x00403628
> [ 265.961187] ath10k_pci 0000:01:00.0: [24]: 0x8098153B 0x0040693C
> 0x0000004E 0xC09CC074
> [ 265.969087] ath10k_pci 0000:01:00.0: [28]: 0x800E026F 0x004069AC
> 0x00000004 0x00413E60
> [ 265.976984] ath10k_pci 0000:01:00.0: [32]: 0x800C383A 0x004069DC
> 0x00413CB0 0x00400000
> [ 265.984884] ath10k_pci 0000:01:00.0: [36]: 0x809800A3 0x00406A0C
> 0x00413CC0 0x009C4750
> [ 265.992784] ath10k_pci 0000:01:00.0: [40]: 0x8098003A 0x00406A5C
> 0x00400000 0x00400600
> [ 266.000684] ath10k_pci 0000:01:00.0: [44]: 0x809607C1 0x00406A8C
> 0xD8400100 0x00406A9C
> [ 266.008582] ath10k_pci 0000:01:00.0: [48]: 0x80960892 0x00406AAC
> 0x00000000 0x00000008
> [ 266.016482] ath10k_pci 0000:01:00.0: [52]: 0x80960E39 0x00406ACC
> 0x00400000 0x00400600
> [ 266.024381] ath10k_pci 0000:01:00.0: [56]: 0x80960E9D 0x00406AEC
> 0x00000000 0x00400600
> [ 266.032279] ath10k_pci 0000:01:00.0: Copy Engine register dump:
> [ 266.040186] ath10k_pci 0000:01:00.0: [00]: 0x0004a000 12 12 29 28
> [ 266.045999] ath10k_pci 0000:01:00.0: [01]: 0x0004a400 11 11 10 11
> [ 266.052595] ath10k_pci 0000:01:00.0: [02]: 0x0004a800 0 0 63 0
> [ 266.059018] ath10k_pci 0000:01:00.0: [03]: 0x0004ac00 0 0 0 0
> [ 266.065441] ath10k_pci 0000:01:00.0: [04]: 0x0004b000 0 0 0 0
> [ 266.071865] ath10k_pci 0000:01:00.0: [05]: 0x0004b400 0 0 0 0
> [ 266.078289] ath10k_pci 0000:01:00.0: [06]: 0x0004b800 0 0 0 0
> [ 266.084713] ath10k_pci 0000:01:00.0: [07]: 0x0004bc00 1 1 1 1
> [ 266.091136] ath10k_pci 0000:01:00.0: [08]: 0x0004c000 0 0 127 0
> [ 266.097559] ath10k_pci 0000:01:00.0: [09]: 0x0004c400 1 1 1 1
> [ 266.103982] ath10k_pci 0000:01:00.0: [10]: 0x0004c800 0 0 0 0
> [ 266.110408] ath10k_pci 0000:01:00.0: [11]: 0x0004cc00 0 0 0 0
> [ 266.876609] ath10k_pci 0000:01:00.0: failed to receive control
> response completion, polling..
> [ 267.915918] ath10k_pci 0000:01:00.0: ctl_resp never came in (-110)
> [ 267.915970] ath10k_pci 0000:01:00.0: failed to connect to HTC: -110
> [ 267.996406] ath10k_pci 0000:01:00.0: could not init core (-110)
> [ 267.996972] ath10k_pci 0000:01:00.0: could not probe fw (-110)
> [ 268.001578] ath10k_pci 0001:01:00.0: assign IRQ: got 100
> [ 268.002612] ath10k_pci 0001:01:00.0: enabling bus mastering
> [ 268.003292] ath10k_pci 0001:01:00.0: pci irq msi oper_irq_mode 2
> irq_mode 0 reset_mode 0
> [ 268.032241] ath10k_pci 0000:01:00.0: cannot restart a device that
> hasn't been started
> [ 268.174893] ath10k_pci 0001:01:00.0: Direct firmware load for
> ath10k/QCA9984/hw1.0/firmware-6.bin failed with error -2
> [ 268.174936] ath10k_pci 0001:01:00.0: Falling back to user helper
> [ 268.206575] firmware ath10k!QCA9984!hw1.0!firmware-6.bin:
> firmware_loading_store: map pages failed
> [ 268.207955] ath10k_pci 0001:01:00.0: qca9984/qca9994 hw1.0 target
> 0x01000000 chip_id 0x00000000 sub 168c:cafe
> [ 268.214521] ath10k_pci 0001:01:00.0: kconfig debug 0 debugfs 1
> tracing 0 dfs 1 testmode 1
> [ 268.227852] ath10k_pci 0001:01:00.0: firmware ver
> 10.4-3.6.0.1-00003 api 5 features
> no-p2p,mfp,peer-flow-ctrl,btcoex-param,allows-mesh-bcast,no-ps crc32
> 266d70b0
> [ 269.485480] ath10k_pci 0001:01:00.0: board_file api 2 bmi_id 0:31
> crc32 dd6d039c
> [ 273.282901] ath10k_pci 0001:01:00.0: firmware crashed! (guid
> 28f0a68b-f881-40cb-b515-f4320b412b7a)
> [ 273.282982] ath10k_pci 0001:01:00.0: qca9984/qca9994 hw1.0 target
> 0x01000000 chip_id 0x00000000 sub 168c:cafe
> [ 273.290780] ath10k_pci 0001:01:00.0: kconfig debug 0 debugfs 1
> tracing 0 dfs 1 testmode 1
> [ 273.306323] ath10k_pci 0001:01:00.0: firmware ver
> 10.4-3.6.0.1-00003 api 5 features
> no-p2p,mfp,peer-flow-ctrl,btcoex-param,allows-mesh-bcast,no-ps crc32
> 266d70b0
> [ 273.310039] ath10k_pci 0001:01:00.0: board_file api 2 bmi_id 0:31
> crc32 dd6d039c
> [ 273.323420] ath10k_pci 0001:01:00.0: htt-ver 0.0 wmi-op 6 htt-op 4
> cal pre-cal-file max-sta 32 raw 0 hwcrypto 1
> [ 273.332841] ath10k_pci 0001:01:00.0: firmware register dump:
> [ 273.340604] ath10k_pci 0001:01:00.0: [00]: 0x01000000 0x000015B3
> 0x009CC074 0x00975B31
> [ 273.346508] ath10k_pci 0001:01:00.0: [04]: 0x009CC074 0x00060530
> 0x00000011 0x004142FC
> [ 273.354234] ath10k_pci 0001:01:00.0: [08]: 0x00416AFC 0x00400000
> 0x00000001 0x00421F90
> [ 273.362135] ath10k_pci 0001:01:00.0: [12]: 0x00000009 0xFFFFFFFF
> 0x00973B25 0x00973B47
> [ 273.370033] ath10k_pci 0001:01:00.0: [16]: 0x009CC074 0x000CFE13
> 0x00000000 0x00000000
> [ 273.377932] ath10k_pci 0001:01:00.0: [20]: 0x409CC074 0x004068DC
> 0x00000001 0x00403628
> [ 273.385833] ath10k_pci 0001:01:00.0: [24]: 0x8098153B 0x0040693C
> 0x0000004E 0xC09CC074
> [ 273.393732] ath10k_pci 0001:01:00.0: [28]: 0x800E026F 0x004069AC
> 0x00000004 0x00413E60
> [ 273.401631] ath10k_pci 0001:01:00.0: [32]: 0x800C383A 0x004069DC
> 0x00413CB0 0x00400000
> [ 273.409529] ath10k_pci 0001:01:00.0: [36]: 0x809800A3 0x00406A0C
> 0x00413CC0 0x009C4750
> [ 273.417429] ath10k_pci 0001:01:00.0: [40]: 0x8098003A 0x00406A5C
> 0x00400000 0x00400600
> [ 273.425329] ath10k_pci 0001:01:00.0: [44]: 0x809607C1 0x00406A8C
> 0xD8400100 0x00406A9C
> [ 273.433227] ath10k_pci 0001:01:00.0: [48]: 0x80960892 0x00406AAC
> 0x00000000 0x00000008
> [ 273.441127] ath10k_pci 0001:01:00.0: [52]: 0x80960E39 0x00406ACC
> 0x00400000 0x00400600
> [ 273.449027] ath10k_pci 0001:01:00.0: [56]: 0x80960E9D 0x00406AEC
> 0x00000000 0x00400600
> [ 273.456924] ath10k_pci 0001:01:00.0: Copy Engine register dump:
> [ 273.464831] ath10k_pci 0001:01:00.0: [00]: 0x0004a000 12 12 29 28
> [ 273.470647] ath10k_pci 0001:01:00.0: [01]: 0x0004a400 11 11 10 11
> [ 273.477243] ath10k_pci 0001:01:00.0: [02]: 0x0004a800 0 0 63 0
> [ 273.483664] ath10k_pci 0001:01:00.0: [03]: 0x0004ac00 0 0 0 0
> [ 273.490088] ath10k_pci 0001:01:00.0: [04]: 0x0004b000 0 0 0 0
> [ 273.496512] ath10k_pci 0001:01:00.0: [05]: 0x0004b400 0 0 0 0
> [ 273.502936] ath10k_pci 0001:01:00.0: [06]: 0x0004b800 0 0 0 0
> [ 273.509360] ath10k_pci 0001:01:00.0: [07]: 0x0004bc00 1 1 1 1
> [ 273.515783] ath10k_pci 0001:01:00.0: [08]: 0x0004c000 0 0 127 0
> [ 273.522208] ath10k_pci 0001:01:00.0: [09]: 0x0004c400 1 1 1 1
> [ 273.528632] ath10k_pci 0001:01:00.0: [10]: 0x0004c800 0 0 0 0
> [ 273.535054] ath10k_pci 0001:01:00.0: [11]: 0x0004cc00 0 0 0 0
> [ 274.326491] ath10k_pci 0001:01:00.0: failed to receive control
> response completion, polling..
> [ 275.356625] ath10k_pci 0001:01:00.0: ctl_resp never came in (-110)
> [ 275.356672] ath10k_pci 0001:01:00.0: failed to connect to HTC: -110
> [ 275.436389] ath10k_pci 0001:01:00.0: could not init core (-110)
> [ 275.436925] ath10k_pci 0001:01:00.0: could not probe fw (-110)
> [ 275.472295] ath10k_pci 0001:01:00.0: cannot restart a device that
> hasn't been started
>
> Various tests with others firmware from candelatech , stock LEDE 17.01
> or dd-wrt give me firmware crash also
>
> I already tried to enable debug info for firmware crash with 'rmmod
> ath10k_pci; rmmod ath10k_core; modprobe ath10k_core
> debug_mask=0xffffffff ; modprobe ath10k_pci ' but without success
>
> Flashing back netgear factory firmware is OK, and all is functionnal
>
> What can I do next ?
>
> Thanks all
>
Hi Sebastian,
OK no problem. I can do that.
Can you just tell me what you need ; I mean which commands to export data ?
For nvram I guess you need 'nvram show' results ?
How I can do a "full flash transfer" ?
As you're dd-wrt dev, I add that I try last dd-wrt build (this one :
https://download1.dd-wrt.com/dd-wrtv2/downloads/betas/2018/08-22-2018-r3669=
8/netgear-r7800/factory-to-ddwrt.img)
which not even boot. Same with kong one (this one :
http://www.desipro.de/ddwrt/K3-AC-IPQ806X/Test/R7800-factory-to-ddwrt.img)
What I made is that I extract the board-2.bin & fiurmware-5.bin from
the ddwrt's squashfs image and try them on the openWRT install, but
without success also.
Best regards,
Bruno
Le jeu. 20 sept. 2018 =C3=A0 13:07, Sebastian Gottschall
<[email protected]> a =C3=A9crit :
>
> since i'm mainly the dd-wrt developer and you tested it as well with the
> same reproduceable crash it would be nice if you could provide me a
> nvram backup with a reproduceable crash (you should change passwords of
> course) to my private email. so i can apply it to my device and to see
> whats happen. if you have a beta device i just can guess that the
> calibration data which is stored in flash memory has maybe a different
> location, so openwrt as well as dd-wrt uses crap to initialize the
> hardware. this is just a guess. but i have 2 r7800 factory models. you
> can also send me a full flash backup of your device using wetransfer, so
> i can compare the content with my device and check if there is a flash
> layout specific different. this would help to track down the problem
> cause and maybe find a specific workaround for such devices by detecting
> them well
>
> Sebastian
>
> Am 20.09.2018 um 09:44 schrieb Bruno Rosset:
> > HI Sebastian,
> >
> > I just flash the r7800 with the openwrt 18.06.1 factory image (here :
> > https://downloads.openwrt.org/releases/18.06.1/targets/ipq806x/generic/=
openwrt-18.06.1-ipq806x-netgear_r7800-squashfs-factory.img)
> >
> > I forgot to mention that I get a beta hardware of the R7800, perhaps
> > there is something different in my hardware compared to the released
> > one.
> >
> > Regards,
> > Bruno
> > Le jeu. 20 sept. 2018 =C3=A0 08:36, Sebastian Gottschall
> > <[email protected]> a =C3=A9crit :
> >> can you tell me how to reproduce this crash? i have 2 r7800 running wi=
th
> >> dd-wrt but no crashes
> >>
> >> Am 19.09.2018 um 22:37 schrieb Bruno Rosset:
> >>> Hi all,
> >>>
> >>> I get a firmware crash using latest openwrt 18.06.1 on the Netgear
> >>> R7800 with stock firmware
> >>> Dmesg is :
> >>> [ 13.804366] ath10k_pci 0000:01:00.0: assign IRQ: got 67
> >>> [ 13.804805] ath10k_pci 0000:01:00.0: enabling device (0140 -> 0142=
)
> >>> [ 13.804887] ath10k_pci 0000:01:00.0: enabling bus mastering
> >>> [ 13.805346] ath10k_pci 0000:01:00.0: pci irq msi oper_irq_mode 2
> >>> irq_mode 0 reset_mode 0
> >>> [ 13.974787] ath10k_pci 0000:01:00.0: Direct firmware load for
> >>> ath10k/pre-cal-pci-0000:01:00.0.bin failed with error -2
> >>> [ 13.974827] ath10k_pci 0000:01:00.0: Falling back to user helper
> >>> [ 14.304794] ath10k_pci 0000:01:00.0: Direct firmware load for
> >>> ath10k/QCA9984/hw1.0/firmware-6.bin failed with error -2
> >>> [ 14.304857] ath10k_pci 0000:01:00.0: Falling back to user helper
> >>> [ 14.337111] firmware ath10k!QCA9984!hw1.0!firmware-6.bin:
> >>> firmware_loading_store: map pages failed
> >>> [ 14.702947] ath10k_pci 0000:01:00.0: qca9984/qca9994 hw1.0 target
> >>> 0x01000000 chip_id 0x00000000 sub 168c:cafe
> >>> [ 14.702997] ath10k_pci 0000:01:00.0: kconfig debug 0 debugfs 1
> >>> tracing 0 dfs 1 testmode 1
> >>> [ 14.716459] ath10k_pci 0000:01:00.0: firmware ver 10.4-3.5.3-00053
> >>> api 5 features no-p2p,mfp,peer-flow-ctrl,btcoex-param,allows-mesh-bca=
st,no-ps
> >>> crc32 4c56a386
> >>> [ 15.973104] ath10k_pci 0000:01:00.0: board_file api 2 bmi_id 0:31
> >>> crc32 dd6d039c
> >>> [ 19.753460] ath10k_pci 0000:01:00.0: firmware crashed! (guid
> >>> ca7089d2-df9a-4f9d-8fa6-d1b908cf3220)
> >>> [ 19.753494] ath10k_pci 0000:01:00.0: qca9984/qca9994 hw1.0 target
> >>> 0x01000000 chip_id 0x00000000 sub 168c:cafe
> >>> [ 19.761307] ath10k_pci 0000:01:00.0: kconfig debug 0 debugfs 1
> >>> tracing 0 dfs 1 testmode 1
> >>> [ 19.773202] ath10k_pci 0000:01:00.0: firmware ver 10.4-3.5.3-00053
> >>> api 5 features no-p2p,mfp,peer-flow-ctrl,btcoex-param,allows-mesh-bca=
st,no-ps
> >>> crc32 4c56a386
> >>> [ 19.779887] ath10k_pci 0000:01:00.0: board_file api 2 bmi_id 0:31
> >>> crc32 dd6d039c
> >>> [ 19.793511] ath10k_pci 0000:01:00.0: htt-ver 0.0 wmi-op 6 htt-op 4
> >>> cal pre-cal-file max-sta 32 raw 0 hwcrypto 1
> >>> [ 19.803176] ath10k_pci 0000:01:00.0: firmware register dump:
> >>> [ 19.810956] ath10k_pci 0000:01:00.0: [00]: 0x01000000 0x000015B3
> >>> 0x009CBB38 0x00975B31
> >>> [ 19.816861] ath10k_pci 0000:01:00.0: [04]: 0x009CBB38 0x00060530
> >>> 0x00000011 0x00415760
> >>> [ 19.824587] ath10k_pci 0000:01:00.0: [08]: 0x00417E6C 0x00400000
> >>> 0x00000001 0x00422990
> >>> [ 19.832485] ath10k_pci 0000:01:00.0: [12]: 0x00000009 0xFFFFFFFF
> >>> 0x00973B25 0x00973B47
> >>> [ 19.840384] ath10k_pci 0000:01:00.0: [16]: 0x009CBB38 0x000CEEA7
> >>> 0x00000000 0x00000000
> >>> [ 19.848284] ath10k_pci 0000:01:00.0: [20]: 0x409CBB38 0x004068DC
> >>> 0x00000001 0x00403628
> >>> [ 19.856183] ath10k_pci 0000:01:00.0: [24]: 0x809814EF 0x0040693C
> >>> 0x00000049 0xC09CBB38
> >>> [ 19.864083] ath10k_pci 0000:01:00.0: [28]: 0x800DF216 0x004069AC
> >>> 0x00000004 0x00415300
> >>> [ 19.871983] ath10k_pci 0000:01:00.0: [32]: 0x800C383A 0x004069DC
> >>> 0x00415160 0x00400000
> >>> [ 19.879881] ath10k_pci 0000:01:00.0: [36]: 0x809800A3 0x00406A0C
> >>> 0x00415170 0x009C41F8
> >>> [ 19.887781] ath10k_pci 0000:01:00.0: [40]: 0x8098003A 0x00406A5C
> >>> 0x00400000 0x00400600
> >>> [ 19.895680] ath10k_pci 0000:01:00.0: [44]: 0x809607C1 0x00406A8C
> >>> 0xD8400100 0x00406A9C
> >>> [ 19.903579] ath10k_pci 0000:01:00.0: [48]: 0x80960892 0x00406AAC
> >>> 0x00000000 0x00000008
> >>> [ 19.911479] ath10k_pci 0000:01:00.0: [52]: 0x80960E39 0x00406ACC
> >>> 0x00400000 0x00400600
> >>> [ 19.919378] ath10k_pci 0000:01:00.0: [56]: 0x80960E9D 0x00406AEC
> >>> 0x00000000 0x00400600
> >>> [ 19.927277] ath10k_pci 0000:01:00.0: Copy Engine register dump:
> >>> [ 19.935181] ath10k_pci 0000:01:00.0: [00]: 0x0004a000 11 11 12 =
11
> >>> [ 19.940994] ath10k_pci 0000:01:00.0: [01]: 0x0004a400 11 11 10 =
11
> >>> [ 19.947590] ath10k_pci 0000:01:00.0: [02]: 0x0004a800 0 0 63 =
0
> >>> [ 19.954014] ath10k_pci 0000:01:00.0: [03]: 0x0004ac00 0 0 0 =
0
> >>> [ 19.960439] ath10k_pci 0000:01:00.0: [04]: 0x0004b000 0 0 0 =
0
> >>> [ 19.966862] ath10k_pci 0000:01:00.0: [05]: 0x0004b400 0 0 0 =
0
> >>> [ 19.973285] ath10k_pci 0000:01:00.0: [06]: 0x0004b800 0 0 0 =
0
> >>> [ 19.979709] ath10k_pci 0000:01:00.0: [07]: 0x0004bc00 1 1 1 =
1
> >>> [ 19.986132] ath10k_pci 0000:01:00.0: [08]: 0x0004c000 0 0 127 =
0
> >>> [ 19.992556] ath10k_pci 0000:01:00.0: [09]: 0x0004c400 1 1 1 =
1
> >>> [ 19.998980] ath10k_pci 0000:01:00.0: [10]: 0x0004c800 0 0 0 =
0
> >>> [ 20.005403] ath10k_pci 0000:01:00.0: [11]: 0x0004cc00 0 0 0 =
0
> >>> [ 20.795948] ath10k_pci 0000:01:00.0: failed to receive control
> >>> response completion, polling..
> >>> [ 21.835766] ath10k_pci 0000:01:00.0: ctl_resp never came in (-110)
> >>> [ 21.835810] ath10k_pci 0000:01:00.0: failed to connect to HTC: -11=
0
> >>> [ 21.915174] ath10k_pci 0000:01:00.0: could not init core (-110)
> >>> [ 21.915620] ath10k_pci 0000:01:00.0: could not probe fw (-110)
> >>> [ 21.920266] ath10k_pci 0001:01:00.0: assign IRQ: got 100
> >>> [ 21.921197] ath10k_pci 0001:01:00.0: enabling device (0140 -> 0142=
)
> >>> [ 21.926032] ath10k_pci 0001:01:00.0: enabling bus mastering
> >>> [ 21.926715] ath10k_pci 0001:01:00.0: pci irq msi oper_irq_mode 2
> >>> irq_mode 0 reset_mode 0
> >>> [ 21.962217] ath10k_pci 0000:01:00.0: cannot restart a device that
> >>> hasn't been started
> >>> [ 22.104728] ath10k_pci 0001:01:00.0: Direct firmware load for
> >>> ath10k/pre-cal-pci-0001:01:00.0.bin failed with error -2
> >>> [ 22.104769] ath10k_pci 0001:01:00.0: Falling back to user helper
> >>> [ 22.424677] ath10k_pci 0001:01:00.0: Direct firmware load for
> >>> ath10k/QCA9984/hw1.0/firmware-6.bin failed with error -2
> >>> [ 22.424736] ath10k_pci 0001:01:00.0: Falling back to user helper
> >>> [ 22.462387] firmware ath10k!QCA9984!hw1.0!firmware-6.bin:
> >>> firmware_loading_store: map pages failed
> >>> [ 22.463844] ath10k_pci 0001:01:00.0: qca9984/qca9994 hw1.0 target
> >>> 0x01000000 chip_id 0x00000000 sub 168c:cafe
> >>> [ 22.470250] ath10k_pci 0001:01:00.0: kconfig debug 0 debugfs 1
> >>> tracing 0 dfs 1 testmode 1
> >>> [ 22.483627] ath10k_pci 0001:01:00.0: firmware ver 10.4-3.5.3-00053
> >>> api 5 features no-p2p,mfp,peer-flow-ctrl,btcoex-param,allows-mesh-bca=
st,no-ps
> >>> crc32 4c56a386
> >>> [ 23.743494] ath10k_pci 0001:01:00.0: board_file api 2 bmi_id 0:31
> >>> crc32 dd6d039c
> >>> [ 27.528777] ath10k_pci 0001:01:00.0: firmware crashed! (guid
> >>> 2112523e-3948-4925-b383-9e672937c6d5)
> >>> [ 27.528819] ath10k_pci 0001:01:00.0: qca9984/qca9994 hw1.0 target
> >>> 0x01000000 chip_id 0x00000000 sub 168c:cafe
> >>> [ 27.536696] ath10k_pci 0001:01:00.0: kconfig debug 0 debugfs 1
> >>> tracing 0 dfs 1 testmode 1
> >>> [ 27.548985] ath10k_pci 0001:01:00.0: firmware ver 10.4-3.5.3-00053
> >>> api 5 features no-p2p,mfp,peer-flow-ctrl,btcoex-param,allows-mesh-bca=
st,no-ps
> >>> crc32 4c56a386
> >>> [ 27.555303] ath10k_pci 0001:01:00.0: board_file api 2 bmi_id 0:31
> >>> crc32 dd6d039c
> >>> [ 27.568835] ath10k_pci 0001:01:00.0: htt-ver 0.0 wmi-op 6 htt-op 4
> >>> cal pre-cal-file max-sta 32 raw 0 hwcrypto 1
> >>> [ 27.578512] ath10k_pci 0001:01:00.0: firmware register dump:
> >>> [ 27.586281] ath10k_pci 0001:01:00.0: [00]: 0x01000000 0x000015B3
> >>> 0x009CBB38 0x00975B31
> >>> [ 27.592186] ath10k_pci 0001:01:00.0: [04]: 0x009CBB38 0x00060530
> >>> 0x00000011 0x00415760
> >>> [ 27.599910] ath10k_pci 0001:01:00.0: [08]: 0x00417E6C 0x00400000
> >>> 0x00000001 0x00422990
> >>> [ 27.607809] ath10k_pci 0001:01:00.0: [12]: 0x00000009 0xFFFFFFFF
> >>> 0x00973B25 0x00973B47
> >>> [ 27.615708] ath10k_pci 0001:01:00.0: [16]: 0x009CBB38 0x000CEEAC
> >>> 0x00000000 0x00000000
> >>> [ 27.623608] ath10k_pci 0001:01:00.0: [20]: 0x409CBB38 0x004068DC
> >>> 0x00000001 0x00403628
> >>> [ 27.631507] ath10k_pci 0001:01:00.0: [24]: 0x809814EF 0x0040693C
> >>> 0x00000049 0xC09CBB38
> >>> [ 27.639405] ath10k_pci 0001:01:00.0: [28]: 0x800DF216 0x004069AC
> >>> 0x00000004 0x00415300
> >>> [ 27.647305] ath10k_pci 0001:01:00.0: [32]: 0x800C383A 0x004069DC
> >>> 0x00415160 0x00400000
> >>> [ 27.655205] ath10k_pci 0001:01:00.0: [36]: 0x809800A3 0x00406A0C
> >>> 0x00415170 0x009C41F8
> >>> [ 27.663104] ath10k_pci 0001:01:00.0: [40]: 0x8098003A 0x00406A5C
> >>> 0x00400000 0x00400600
> >>> [ 27.671004] ath10k_pci 0001:01:00.0: [44]: 0x809607C1 0x00406A8C
> >>> 0xD8400100 0x00406A9C
> >>> [ 27.678902] ath10k_pci 0001:01:00.0: [48]: 0x80960892 0x00406AAC
> >>> 0x00000000 0x00000008
> >>> [ 27.686801] ath10k_pci 0001:01:00.0: [52]: 0x80960E39 0x00406ACC
> >>> 0x00400000 0x00400600
> >>> [ 27.694700] ath10k_pci 0001:01:00.0: [56]: 0x80960E9D 0x00406AEC
> >>> 0x00000000 0x00400600
> >>> [ 27.702603] ath10k_pci 0001:01:00.0: Copy Engine register dump:
> >>> [ 27.710506] ath10k_pci 0001:01:00.0: [00]: 0x0004a000 11 11 12 =
11
> >>> [ 27.716322] ath10k_pci 0001:01:00.0: [01]: 0x0004a400 11 11 10 =
11
> >>> [ 27.722917] ath10k_pci 0001:01:00.0: [02]: 0x0004a800 0 0 63 =
0
> >>> [ 27.729340] ath10k_pci 0001:01:00.0: [03]: 0x0004ac00 0 0 0 =
0
> >>> [ 27.735764] ath10k_pci 0001:01:00.0: [04]: 0x0004b000 0 0 0 =
0
> >>> [ 27.742188] ath10k_pci 0001:01:00.0: [05]: 0x0004b400 0 0 0 =
0
> >>> [ 27.748611] ath10k_pci 0001:01:00.0: [06]: 0x0004b800 0 0 0 =
0
> >>> [ 27.755035] ath10k_pci 0001:01:00.0: [07]: 0x0004bc00 1 1 1 =
1
> >>> [ 27.761459] ath10k_pci 0001:01:00.0: [08]: 0x0004c000 0 0 127 =
0
> >>> [ 27.767884] ath10k_pci 0001:01:00.0: [09]: 0x0004c400 1 1 1 =
1
> >>> [ 27.774304] ath10k_pci 0001:01:00.0: [10]: 0x0004c800 0 0 0 =
0
> >>> [ 27.780731] ath10k_pci 0001:01:00.0: [11]: 0x0004cc00 0 0 0 =
0
> >>> [ 28.567840] ath10k_pci 0001:01:00.0: failed to receive control
> >>> response completion, polling..
> >>> [ 29.616315] ath10k_pci 0001:01:00.0: ctl_resp never came in (-110)
> >>> [ 29.616341] ath10k_pci 0001:01:00.0: failed to connect to HTC: -11=
0
> >>> [ 29.695567] ath10k_pci 0001:01:00.0: could not init core (-110)
> >>> [ 29.695988] ath10k_pci 0001:01:00.0: could not probe fw (-110)
> >>> [ 29.703824] kmodloader: done loading kernel modules from /etc/modu=
les.d/*
> >>> [ 29.732245] ath10k_pci 0001:01:00.0: cannot restart a device that
> >>> hasn't been started
> >>>
> >>> Replacing stock firmware with latest from kvalo github (here :
> >>> https://github.com/kvalo/ath10k-firmware/tree/master/QCA9984/hw1.0/3.=
6.0.1)
> >>> I get the same result
> >>> Dmesg is :
> >>> [ 235.442819] ath10k_pci 0001:01:00.0: disabling bus mastering
> >>> [ 235.482588] ath10k_pci 0000:01:00.0: disabling bus mastering
> >>> [ 260.586372] ath10k_pci 0000:01:00.0: assign IRQ: got 67
> >>> [ 260.586771] ath10k_pci 0000:01:00.0: enabling bus mastering
> >>> [ 260.587218] ath10k_pci 0000:01:00.0: pci irq msi oper_irq_mode 2
> >>> irq_mode 0 reset_mode 0
> >>> [ 260.754869] ath10k_pci 0000:01:00.0: Direct firmware load for
> >>> ath10k/QCA9984/hw1.0/firmware-6.bin failed with error -2
> >>> [ 260.754917] ath10k_pci 0000:01:00.0: Falling back to user helper
> >>> [ 260.786271] firmware ath10k!QCA9984!hw1.0!firmware-6.bin:
> >>> firmware_loading_store: map pages failed
> >>> [ 260.787219] ath10k_pci 0000:01:00.0: qca9984/qca9994 hw1.0 target
> >>> 0x01000000 chip_id 0x00000000 sub 168c:cafe
> >>> [ 260.794202] ath10k_pci 0000:01:00.0: kconfig debug 0 debugfs 1
> >>> tracing 0 dfs 1 testmode 1
> >>> [ 260.806246] ath10k_pci 0000:01:00.0: firmware ver
> >>> 10.4-3.6.0.1-00003 api 5 features
> >>> no-p2p,mfp,peer-flow-ctrl,btcoex-param,allows-mesh-bcast,no-ps crc32
> >>> 266d70b0
> >>> [ 262.065148] ath10k_pci 0000:01:00.0: board_file api 2 bmi_id 0:31
> >>> crc32 dd6d039c
> >>> [ 265.858256] ath10k_pci 0000:01:00.0: firmware crashed! (guid
> >>> 2b6addfc-915e-437a-a7fa-3691cbf4b39e)
> >>> [ 265.858347] ath10k_pci 0000:01:00.0: qca9984/qca9994 hw1.0 target
> >>> 0x01000000 chip_id 0x00000000 sub 168c:cafe
> >>> [ 265.866136] ath10k_pci 0000:01:00.0: kconfig debug 0 debugfs 1
> >>> tracing 0 dfs 1 testmode 1
> >>> [ 265.881167] ath10k_pci 0000:01:00.0: firmware ver
> >>> 10.4-3.6.0.1-00003 api 5 features
> >>> no-p2p,mfp,peer-flow-ctrl,btcoex-param,allows-mesh-bcast,no-ps crc32
> >>> 266d70b0
> >>> [ 265.885460] ath10k_pci 0000:01:00.0: board_file api 2 bmi_id 0:31
> >>> crc32 dd6d039c
> >>> [ 265.898696] ath10k_pci 0000:01:00.0: htt-ver 0.0 wmi-op 6 htt-op 4
> >>> cal pre-cal-file max-sta 32 raw 0 hwcrypto 1
> >>> [ 265.908193] ath10k_pci 0000:01:00.0: firmware register dump:
> >>> [ 265.915961] ath10k_pci 0000:01:00.0: [00]: 0x01000000 0x000015B3
> >>> 0x009CC074 0x00975B31
> >>> [ 265.921864] ath10k_pci 0000:01:00.0: [04]: 0x009CC074 0x00060530
> >>> 0x00000011 0x004142FC
> >>> [ 265.929590] ath10k_pci 0000:01:00.0: [08]: 0x00416AFC 0x00400000
> >>> 0x00000001 0x00421F90
> >>> [ 265.937488] ath10k_pci 0000:01:00.0: [12]: 0x00000009 0xFFFFFFFF
> >>> 0x00973B25 0x00973B47
> >>> [ 265.945389] ath10k_pci 0000:01:00.0: [16]: 0x009CC074 0x000CFE13
> >>> 0x00000000 0x00000000
> >>> [ 265.953289] ath10k_pci 0000:01:00.0: [20]: 0x409CC074 0x004068DC
> >>> 0x00000001 0x00403628
> >>> [ 265.961187] ath10k_pci 0000:01:00.0: [24]: 0x8098153B 0x0040693C
> >>> 0x0000004E 0xC09CC074
> >>> [ 265.969087] ath10k_pci 0000:01:00.0: [28]: 0x800E026F 0x004069AC
> >>> 0x00000004 0x00413E60
> >>> [ 265.976984] ath10k_pci 0000:01:00.0: [32]: 0x800C383A 0x004069DC
> >>> 0x00413CB0 0x00400000
> >>> [ 265.984884] ath10k_pci 0000:01:00.0: [36]: 0x809800A3 0x00406A0C
> >>> 0x00413CC0 0x009C4750
> >>> [ 265.992784] ath10k_pci 0000:01:00.0: [40]: 0x8098003A 0x00406A5C
> >>> 0x00400000 0x00400600
> >>> [ 266.000684] ath10k_pci 0000:01:00.0: [44]: 0x809607C1 0x00406A8C
> >>> 0xD8400100 0x00406A9C
> >>> [ 266.008582] ath10k_pci 0000:01:00.0: [48]: 0x80960892 0x00406AAC
> >>> 0x00000000 0x00000008
> >>> [ 266.016482] ath10k_pci 0000:01:00.0: [52]: 0x80960E39 0x00406ACC
> >>> 0x00400000 0x00400600
> >>> [ 266.024381] ath10k_pci 0000:01:00.0: [56]: 0x80960E9D 0x00406AEC
> >>> 0x00000000 0x00400600
> >>> [ 266.032279] ath10k_pci 0000:01:00.0: Copy Engine register dump:
> >>> [ 266.040186] ath10k_pci 0000:01:00.0: [00]: 0x0004a000 12 12 29 =
28
> >>> [ 266.045999] ath10k_pci 0000:01:00.0: [01]: 0x0004a400 11 11 10 =
11
> >>> [ 266.052595] ath10k_pci 0000:01:00.0: [02]: 0x0004a800 0 0 63 =
0
> >>> [ 266.059018] ath10k_pci 0000:01:00.0: [03]: 0x0004ac00 0 0 0 =
0
> >>> [ 266.065441] ath10k_pci 0000:01:00.0: [04]: 0x0004b000 0 0 0 =
0
> >>> [ 266.071865] ath10k_pci 0000:01:00.0: [05]: 0x0004b400 0 0 0 =
0
> >>> [ 266.078289] ath10k_pci 0000:01:00.0: [06]: 0x0004b800 0 0 0 =
0
> >>> [ 266.084713] ath10k_pci 0000:01:00.0: [07]: 0x0004bc00 1 1 1 =
1
> >>> [ 266.091136] ath10k_pci 0000:01:00.0: [08]: 0x0004c000 0 0 127 =
0
> >>> [ 266.097559] ath10k_pci 0000:01:00.0: [09]: 0x0004c400 1 1 1 =
1
> >>> [ 266.103982] ath10k_pci 0000:01:00.0: [10]: 0x0004c800 0 0 0 =
0
> >>> [ 266.110408] ath10k_pci 0000:01:00.0: [11]: 0x0004cc00 0 0 0 =
0
> >>> [ 266.876609] ath10k_pci 0000:01:00.0: failed to receive control
> >>> response completion, polling..
> >>> [ 267.915918] ath10k_pci 0000:01:00.0: ctl_resp never came in (-110)
> >>> [ 267.915970] ath10k_pci 0000:01:00.0: failed to connect to HTC: -11=
0
> >>> [ 267.996406] ath10k_pci 0000:01:00.0: could not init core (-110)
> >>> [ 267.996972] ath10k_pci 0000:01:00.0: could not probe fw (-110)
> >>> [ 268.001578] ath10k_pci 0001:01:00.0: assign IRQ: got 100
> >>> [ 268.002612] ath10k_pci 0001:01:00.0: enabling bus mastering
> >>> [ 268.003292] ath10k_pci 0001:01:00.0: pci irq msi oper_irq_mode 2
> >>> irq_mode 0 reset_mode 0
> >>> [ 268.032241] ath10k_pci 0000:01:00.0: cannot restart a device that
> >>> hasn't been started
> >>> [ 268.174893] ath10k_pci 0001:01:00.0: Direct firmware load for
> >>> ath10k/QCA9984/hw1.0/firmware-6.bin failed with error -2
> >>> [ 268.174936] ath10k_pci 0001:01:00.0: Falling back to user helper
> >>> [ 268.206575] firmware ath10k!QCA9984!hw1.0!firmware-6.bin:
> >>> firmware_loading_store: map pages failed
> >>> [ 268.207955] ath10k_pci 0001:01:00.0: qca9984/qca9994 hw1.0 target
> >>> 0x01000000 chip_id 0x00000000 sub 168c:cafe
> >>> [ 268.214521] ath10k_pci 0001:01:00.0: kconfig debug 0 debugfs 1
> >>> tracing 0 dfs 1 testmode 1
> >>> [ 268.227852] ath10k_pci 0001:01:00.0: firmware ver
> >>> 10.4-3.6.0.1-00003 api 5 features
> >>> no-p2p,mfp,peer-flow-ctrl,btcoex-param,allows-mesh-bcast,no-ps crc32
> >>> 266d70b0
> >>> [ 269.485480] ath10k_pci 0001:01:00.0: board_file api 2 bmi_id 0:31
> >>> crc32 dd6d039c
> >>> [ 273.282901] ath10k_pci 0001:01:00.0: firmware crashed! (guid
> >>> 28f0a68b-f881-40cb-b515-f4320b412b7a)
> >>> [ 273.282982] ath10k_pci 0001:01:00.0: qca9984/qca9994 hw1.0 target
> >>> 0x01000000 chip_id 0x00000000 sub 168c:cafe
> >>> [ 273.290780] ath10k_pci 0001:01:00.0: kconfig debug 0 debugfs 1
> >>> tracing 0 dfs 1 testmode 1
> >>> [ 273.306323] ath10k_pci 0001:01:00.0: firmware ver
> >>> 10.4-3.6.0.1-00003 api 5 features
> >>> no-p2p,mfp,peer-flow-ctrl,btcoex-param,allows-mesh-bcast,no-ps crc32
> >>> 266d70b0
> >>> [ 273.310039] ath10k_pci 0001:01:00.0: board_file api 2 bmi_id 0:31
> >>> crc32 dd6d039c
> >>> [ 273.323420] ath10k_pci 0001:01:00.0: htt-ver 0.0 wmi-op 6 htt-op 4
> >>> cal pre-cal-file max-sta 32 raw 0 hwcrypto 1
> >>> [ 273.332841] ath10k_pci 0001:01:00.0: firmware register dump:
> >>> [ 273.340604] ath10k_pci 0001:01:00.0: [00]: 0x01000000 0x000015B3
> >>> 0x009CC074 0x00975B31
> >>> [ 273.346508] ath10k_pci 0001:01:00.0: [04]: 0x009CC074 0x00060530
> >>> 0x00000011 0x004142FC
> >>> [ 273.354234] ath10k_pci 0001:01:00.0: [08]: 0x00416AFC 0x00400000
> >>> 0x00000001 0x00421F90
> >>> [ 273.362135] ath10k_pci 0001:01:00.0: [12]: 0x00000009 0xFFFFFFFF
> >>> 0x00973B25 0x00973B47
> >>> [ 273.370033] ath10k_pci 0001:01:00.0: [16]: 0x009CC074 0x000CFE13
> >>> 0x00000000 0x00000000
> >>> [ 273.377932] ath10k_pci 0001:01:00.0: [20]: 0x409CC074 0x004068DC
> >>> 0x00000001 0x00403628
> >>> [ 273.385833] ath10k_pci 0001:01:00.0: [24]: 0x8098153B 0x0040693C
> >>> 0x0000004E 0xC09CC074
> >>> [ 273.393732] ath10k_pci 0001:01:00.0: [28]: 0x800E026F 0x004069AC
> >>> 0x00000004 0x00413E60
> >>> [ 273.401631] ath10k_pci 0001:01:00.0: [32]: 0x800C383A 0x004069DC
> >>> 0x00413CB0 0x00400000
> >>> [ 273.409529] ath10k_pci 0001:01:00.0: [36]: 0x809800A3 0x00406A0C
> >>> 0x00413CC0 0x009C4750
> >>> [ 273.417429] ath10k_pci 0001:01:00.0: [40]: 0x8098003A 0x00406A5C
> >>> 0x00400000 0x00400600
> >>> [ 273.425329] ath10k_pci 0001:01:00.0: [44]: 0x809607C1 0x00406A8C
> >>> 0xD8400100 0x00406A9C
> >>> [ 273.433227] ath10k_pci 0001:01:00.0: [48]: 0x80960892 0x00406AAC
> >>> 0x00000000 0x00000008
> >>> [ 273.441127] ath10k_pci 0001:01:00.0: [52]: 0x80960E39 0x00406ACC
> >>> 0x00400000 0x00400600
> >>> [ 273.449027] ath10k_pci 0001:01:00.0: [56]: 0x80960E9D 0x00406AEC
> >>> 0x00000000 0x00400600
> >>> [ 273.456924] ath10k_pci 0001:01:00.0: Copy Engine register dump:
> >>> [ 273.464831] ath10k_pci 0001:01:00.0: [00]: 0x0004a000 12 12 29 =
28
> >>> [ 273.470647] ath10k_pci 0001:01:00.0: [01]: 0x0004a400 11 11 10 =
11
> >>> [ 273.477243] ath10k_pci 0001:01:00.0: [02]: 0x0004a800 0 0 63 =
0
> >>> [ 273.483664] ath10k_pci 0001:01:00.0: [03]: 0x0004ac00 0 0 0 =
0
> >>> [ 273.490088] ath10k_pci 0001:01:00.0: [04]: 0x0004b000 0 0 0 =
0
> >>> [ 273.496512] ath10k_pci 0001:01:00.0: [05]: 0x0004b400 0 0 0 =
0
> >>> [ 273.502936] ath10k_pci 0001:01:00.0: [06]: 0x0004b800 0 0 0 =
0
> >>> [ 273.509360] ath10k_pci 0001:01:00.0: [07]: 0x0004bc00 1 1 1 =
1
> >>> [ 273.515783] ath10k_pci 0001:01:00.0: [08]: 0x0004c000 0 0 127 =
0
> >>> [ 273.522208] ath10k_pci 0001:01:00.0: [09]: 0x0004c400 1 1 1 =
1
> >>> [ 273.528632] ath10k_pci 0001:01:00.0: [10]: 0x0004c800 0 0 0 =
0
> >>> [ 273.535054] ath10k_pci 0001:01:00.0: [11]: 0x0004cc00 0 0 0 =
0
> >>> [ 274.326491] ath10k_pci 0001:01:00.0: failed to receive control
> >>> response completion, polling..
> >>> [ 275.356625] ath10k_pci 0001:01:00.0: ctl_resp never came in (-110)
> >>> [ 275.356672] ath10k_pci 0001:01:00.0: failed to connect to HTC: -11=
0
> >>> [ 275.436389] ath10k_pci 0001:01:00.0: could not init core (-110)
> >>> [ 275.436925] ath10k_pci 0001:01:00.0: could not probe fw (-110)
> >>> [ 275.472295] ath10k_pci 0001:01:00.0: cannot restart a device that
> >>> hasn't been started
> >>>
> >>> Various tests with others firmware from candelatech , stock LEDE 17.0=
1
> >>> or dd-wrt give me firmware crash also
> >>>
> >>> I already tried to enable debug info for firmware crash with 'rmmod
> >>> ath10k_pci; rmmod ath10k_core; modprobe ath10k_core
> >>> debug_mask=3D0xffffffff ; modprobe ath10k_pci ' but without success
> >>>
> >>> Flashing back netgear factory firmware is OK, and all is functionnal
> >>>
> >>> What can I do next ?
> >>>
> >>> Thanks all
> >>>
btw. you can do the backup also with openwrt of course. i just need a
backup of the flash memory. ben already wrote that my guess about a
different location for the calibration data storage might be true. so
find out the correct location i need to analyse the flash dump
Am 21.09.2018 um 11:35 schrieb Sebastian Gottschall:
> you may use the backup function at Administration->backup which
> creates a file for download
>
> or from commandline use "nvram backup /tmp/mybackup.bin"
>
> for full flash backup on the r7800 do
>
> cat /proc/mtd which shows
>
> mtd0: 00c80000 00020000 "qcadata"
> mtd1: 00500000 00020000 "APPSBL"
> mtd2: 00080000 00020000 "APPSBLENV"
> mtd3: 00140000 00020000 "art"
> mtd4: 00140000 00020000 "artbak"
> mtd5: 01e00000 00020000 "linux"
> mtd6: 01be0000 00020000 "rootfs"
> mtd7: 00200000 00020000 "nvram"
> mtd8: 02000000 00020000 "ddwrt"
> mtd9: 00640000 00020000 "reserved"
>
>
> then do a backup of all partitions with
>
> cat /dev/mtdblock0 > /tmp/mtdblock0.bin and so on
>
> then copy them with scp to your local computer. you may need to enable
> ssh server first at services->ssh
>
> Am 20.09.2018 um 14:02 schrieb Bruno Rosset:
>> Hi Sebastian,
>>
>> OK no problem. I can do that.
>> Can you just tell me what you need ; I mean which commands to export
>> data ?
>> For nvram I guess you need 'nvram show' results ?
>>
>> How I can do a "full flash transfer" ?
>>
>> As you're dd-wrt dev, I add that I try last dd-wrt build (this one :
>> https://download1.dd-wrt.com/dd-wrtv2/downloads/betas/2018/08-22-2018-r36698/netgear-r7800/factory-to-ddwrt.img)
>>
>> which not even boot. Same with kong one (this one :
>> http://www.desipro.de/ddwrt/K3-AC-IPQ806X/Test/R7800-factory-to-ddwrt.img)
>>
>
> thats not the latest
>
> ftp://ftp.dd-wrt.com/betas/2018/09-19-2018-r36995/netgear-r7800/factory-to-ddwrt.img
>
>
> i tested this also on my devices
>
> so if these other versions you mentioned wont boot on your device it
> already looks strange since i test the r7800 always with each released
> build. the builds from desipro.de are external and not watched by me
>
> these are test builds by a contributor
>
>
>>
>> What I made is that I extract the board-2.bin & fiurmware-5.bin from
>> the ddwrt's squashfs image and try them on the openWRT install, but
>> without success also.
>
> the board-2.bin is not the one you need. the real board data is
> generated at /tmp folder from flash partition content and named
> /tmp/board1.bin and /tmp/board2.bin for each of both wireless devices
>
>
>>
>> Best regards,
>> Bruno
>> Le jeu. 20 sept. 2018 à 13:07, Sebastian Gottschall
>> <[email protected]> a écrit :
>>> since i'm mainly the dd-wrt developer and you tested it as well with
>>> the
>>> same reproduceable crash it would be nice if you could provide me a
>>> nvram backup with a reproduceable crash (you should change passwords of
>>> course) to my private email. so i can apply it to my device and to see
>>> whats happen. if you have a beta device i just can guess that the
>>> calibration data which is stored in flash memory has maybe a different
>>> location, so openwrt as well as dd-wrt uses crap to initialize the
>>> hardware. this is just a guess. but i have 2 r7800 factory models. you
>>> can also send me a full flash backup of your device using
>>> wetransfer, so
>>> i can compare the content with my device and check if there is a flash
>>> layout specific different. this would help to track down the problem
>>> cause and maybe find a specific workaround for such devices by
>>> detecting
>>> them well
>>>
>>> Sebastian
>>>
>>> Am 20.09.2018 um 09:44 schrieb Bruno Rosset:
>>>> HI Sebastian,
>>>>
>>>> I just flash the r7800 with the openwrt 18.06.1 factory image (here :
>>>> https://downloads.openwrt.org/releases/18.06.1/targets/ipq806x/generic/openwrt-18.06.1-ipq806x-netgear_r7800-squashfs-factory.img)
>>>>
>>>>
>>>> I forgot to mention that I get a beta hardware of the R7800, perhaps
>>>> there is something different in my hardware compared to the released
>>>> one.
>>>>
>>>> Regards,
>>>> Bruno
>>>> Le jeu. 20 sept. 2018 à 08:36, Sebastian Gottschall
>>>> <[email protected]> a écrit :
>>>>> can you tell me how to reproduce this crash? i have 2 r7800
>>>>> running with
>>>>> dd-wrt but no crashes
>>>>>
>>>>> Am 19.09.2018 um 22:37 schrieb Bruno Rosset:
>>>>>> Hi all,
>>>>>>
>>>>>> I get a firmware crash using latest openwrt 18.06.1 on the Netgear
>>>>>> R7800 with stock firmware
>>>>>> Dmesg is :
>>>>>> [ 13.804366] ath10k_pci 0000:01:00.0: assign IRQ: got 67
>>>>>> [ 13.804805] ath10k_pci 0000:01:00.0: enabling device (0140 ->
>>>>>> 0142)
>>>>>> [ 13.804887] ath10k_pci 0000:01:00.0: enabling bus mastering
>>>>>> [ 13.805346] ath10k_pci 0000:01:00.0: pci irq msi oper_irq_mode 2
>>>>>> irq_mode 0 reset_mode 0
>>>>>> [ 13.974787] ath10k_pci 0000:01:00.0: Direct firmware load for
>>>>>> ath10k/pre-cal-pci-0000:01:00.0.bin failed with error -2
>>>>>> [ 13.974827] ath10k_pci 0000:01:00.0: Falling back to user helper
>>>>>> [ 14.304794] ath10k_pci 0000:01:00.0: Direct firmware load for
>>>>>> ath10k/QCA9984/hw1.0/firmware-6.bin failed with error -2
>>>>>> [ 14.304857] ath10k_pci 0000:01:00.0: Falling back to user helper
>>>>>> [ 14.337111] firmware ath10k!QCA9984!hw1.0!firmware-6.bin:
>>>>>> firmware_loading_store: map pages failed
>>>>>> [ 14.702947] ath10k_pci 0000:01:00.0: qca9984/qca9994 hw1.0 target
>>>>>> 0x01000000 chip_id 0x00000000 sub 168c:cafe
>>>>>> [ 14.702997] ath10k_pci 0000:01:00.0: kconfig debug 0 debugfs 1
>>>>>> tracing 0 dfs 1 testmode 1
>>>>>> [ 14.716459] ath10k_pci 0000:01:00.0: firmware ver
>>>>>> 10.4-3.5.3-00053
>>>>>> api 5 features
>>>>>> no-p2p,mfp,peer-flow-ctrl,btcoex-param,allows-mesh-bcast,no-ps
>>>>>> crc32 4c56a386
>>>>>> [ 15.973104] ath10k_pci 0000:01:00.0: board_file api 2 bmi_id 0:31
>>>>>> crc32 dd6d039c
>>>>>> [ 19.753460] ath10k_pci 0000:01:00.0: firmware crashed! (guid
>>>>>> ca7089d2-df9a-4f9d-8fa6-d1b908cf3220)
>>>>>> [ 19.753494] ath10k_pci 0000:01:00.0: qca9984/qca9994 hw1.0 target
>>>>>> 0x01000000 chip_id 0x00000000 sub 168c:cafe
>>>>>> [ 19.761307] ath10k_pci 0000:01:00.0: kconfig debug 0 debugfs 1
>>>>>> tracing 0 dfs 1 testmode 1
>>>>>> [ 19.773202] ath10k_pci 0000:01:00.0: firmware ver
>>>>>> 10.4-3.5.3-00053
>>>>>> api 5 features
>>>>>> no-p2p,mfp,peer-flow-ctrl,btcoex-param,allows-mesh-bcast,no-ps
>>>>>> crc32 4c56a386
>>>>>> [ 19.779887] ath10k_pci 0000:01:00.0: board_file api 2 bmi_id 0:31
>>>>>> crc32 dd6d039c
>>>>>> [ 19.793511] ath10k_pci 0000:01:00.0: htt-ver 0.0 wmi-op 6
>>>>>> htt-op 4
>>>>>> cal pre-cal-file max-sta 32 raw 0 hwcrypto 1
>>>>>> [ 19.803176] ath10k_pci 0000:01:00.0: firmware register dump:
>>>>>> [ 19.810956] ath10k_pci 0000:01:00.0: [00]: 0x01000000 0x000015B3
>>>>>> 0x009CBB38 0x00975B31
>>>>>> [ 19.816861] ath10k_pci 0000:01:00.0: [04]: 0x009CBB38 0x00060530
>>>>>> 0x00000011 0x00415760
>>>>>> [ 19.824587] ath10k_pci 0000:01:00.0: [08]: 0x00417E6C 0x00400000
>>>>>> 0x00000001 0x00422990
>>>>>> [ 19.832485] ath10k_pci 0000:01:00.0: [12]: 0x00000009 0xFFFFFFFF
>>>>>> 0x00973B25 0x00973B47
>>>>>> [ 19.840384] ath10k_pci 0000:01:00.0: [16]: 0x009CBB38 0x000CEEA7
>>>>>> 0x00000000 0x00000000
>>>>>> [ 19.848284] ath10k_pci 0000:01:00.0: [20]: 0x409CBB38 0x004068DC
>>>>>> 0x00000001 0x00403628
>>>>>> [ 19.856183] ath10k_pci 0000:01:00.0: [24]: 0x809814EF 0x0040693C
>>>>>> 0x00000049 0xC09CBB38
>>>>>> [ 19.864083] ath10k_pci 0000:01:00.0: [28]: 0x800DF216 0x004069AC
>>>>>> 0x00000004 0x00415300
>>>>>> [ 19.871983] ath10k_pci 0000:01:00.0: [32]: 0x800C383A 0x004069DC
>>>>>> 0x00415160 0x00400000
>>>>>> [ 19.879881] ath10k_pci 0000:01:00.0: [36]: 0x809800A3 0x00406A0C
>>>>>> 0x00415170 0x009C41F8
>>>>>> [ 19.887781] ath10k_pci 0000:01:00.0: [40]: 0x8098003A 0x00406A5C
>>>>>> 0x00400000 0x00400600
>>>>>> [ 19.895680] ath10k_pci 0000:01:00.0: [44]: 0x809607C1 0x00406A8C
>>>>>> 0xD8400100 0x00406A9C
>>>>>> [ 19.903579] ath10k_pci 0000:01:00.0: [48]: 0x80960892 0x00406AAC
>>>>>> 0x00000000 0x00000008
>>>>>> [ 19.911479] ath10k_pci 0000:01:00.0: [52]: 0x80960E39 0x00406ACC
>>>>>> 0x00400000 0x00400600
>>>>>> [ 19.919378] ath10k_pci 0000:01:00.0: [56]: 0x80960E9D 0x00406AEC
>>>>>> 0x00000000 0x00400600
>>>>>> [ 19.927277] ath10k_pci 0000:01:00.0: Copy Engine register dump:
>>>>>> [ 19.935181] ath10k_pci 0000:01:00.0: [00]: 0x0004a000 11 11
>>>>>> 12 11
>>>>>> [ 19.940994] ath10k_pci 0000:01:00.0: [01]: 0x0004a400 11 11
>>>>>> 10 11
>>>>>> [ 19.947590] ath10k_pci 0000:01:00.0: [02]: 0x0004a800 0 0
>>>>>> 63 0
>>>>>> [ 19.954014] ath10k_pci 0000:01:00.0: [03]: 0x0004ac00 0
>>>>>> 0 0 0
>>>>>> [ 19.960439] ath10k_pci 0000:01:00.0: [04]: 0x0004b000 0
>>>>>> 0 0 0
>>>>>> [ 19.966862] ath10k_pci 0000:01:00.0: [05]: 0x0004b400 0
>>>>>> 0 0 0
>>>>>> [ 19.973285] ath10k_pci 0000:01:00.0: [06]: 0x0004b800 0
>>>>>> 0 0 0
>>>>>> [ 19.979709] ath10k_pci 0000:01:00.0: [07]: 0x0004bc00 1
>>>>>> 1 1 1
>>>>>> [ 19.986132] ath10k_pci 0000:01:00.0: [08]: 0x0004c000 0 0
>>>>>> 127 0
>>>>>> [ 19.992556] ath10k_pci 0000:01:00.0: [09]: 0x0004c400 1
>>>>>> 1 1 1
>>>>>> [ 19.998980] ath10k_pci 0000:01:00.0: [10]: 0x0004c800 0
>>>>>> 0 0 0
>>>>>> [ 20.005403] ath10k_pci 0000:01:00.0: [11]: 0x0004cc00 0
>>>>>> 0 0 0
>>>>>> [ 20.795948] ath10k_pci 0000:01:00.0: failed to receive control
>>>>>> response completion, polling..
>>>>>> [ 21.835766] ath10k_pci 0000:01:00.0: ctl_resp never came in
>>>>>> (-110)
>>>>>> [ 21.835810] ath10k_pci 0000:01:00.0: failed to connect to HTC:
>>>>>> -110
>>>>>> [ 21.915174] ath10k_pci 0000:01:00.0: could not init core (-110)
>>>>>> [ 21.915620] ath10k_pci 0000:01:00.0: could not probe fw (-110)
>>>>>> [ 21.920266] ath10k_pci 0001:01:00.0: assign IRQ: got 100
>>>>>> [ 21.921197] ath10k_pci 0001:01:00.0: enabling device (0140 ->
>>>>>> 0142)
>>>>>> [ 21.926032] ath10k_pci 0001:01:00.0: enabling bus mastering
>>>>>> [ 21.926715] ath10k_pci 0001:01:00.0: pci irq msi oper_irq_mode 2
>>>>>> irq_mode 0 reset_mode 0
>>>>>> [ 21.962217] ath10k_pci 0000:01:00.0: cannot restart a device that
>>>>>> hasn't been started
>>>>>> [ 22.104728] ath10k_pci 0001:01:00.0: Direct firmware load for
>>>>>> ath10k/pre-cal-pci-0001:01:00.0.bin failed with error -2
>>>>>> [ 22.104769] ath10k_pci 0001:01:00.0: Falling back to user helper
>>>>>> [ 22.424677] ath10k_pci 0001:01:00.0: Direct firmware load for
>>>>>> ath10k/QCA9984/hw1.0/firmware-6.bin failed with error -2
>>>>>> [ 22.424736] ath10k_pci 0001:01:00.0: Falling back to user helper
>>>>>> [ 22.462387] firmware ath10k!QCA9984!hw1.0!firmware-6.bin:
>>>>>> firmware_loading_store: map pages failed
>>>>>> [ 22.463844] ath10k_pci 0001:01:00.0: qca9984/qca9994 hw1.0 target
>>>>>> 0x01000000 chip_id 0x00000000 sub 168c:cafe
>>>>>> [ 22.470250] ath10k_pci 0001:01:00.0: kconfig debug 0 debugfs 1
>>>>>> tracing 0 dfs 1 testmode 1
>>>>>> [ 22.483627] ath10k_pci 0001:01:00.0: firmware ver
>>>>>> 10.4-3.5.3-00053
>>>>>> api 5 features
>>>>>> no-p2p,mfp,peer-flow-ctrl,btcoex-param,allows-mesh-bcast,no-ps
>>>>>> crc32 4c56a386
>>>>>> [ 23.743494] ath10k_pci 0001:01:00.0: board_file api 2 bmi_id 0:31
>>>>>> crc32 dd6d039c
>>>>>> [ 27.528777] ath10k_pci 0001:01:00.0: firmware crashed! (guid
>>>>>> 2112523e-3948-4925-b383-9e672937c6d5)
>>>>>> [ 27.528819] ath10k_pci 0001:01:00.0: qca9984/qca9994 hw1.0 target
>>>>>> 0x01000000 chip_id 0x00000000 sub 168c:cafe
>>>>>> [ 27.536696] ath10k_pci 0001:01:00.0: kconfig debug 0 debugfs 1
>>>>>> tracing 0 dfs 1 testmode 1
>>>>>> [ 27.548985] ath10k_pci 0001:01:00.0: firmware ver
>>>>>> 10.4-3.5.3-00053
>>>>>> api 5 features
>>>>>> no-p2p,mfp,peer-flow-ctrl,btcoex-param,allows-mesh-bcast,no-ps
>>>>>> crc32 4c56a386
>>>>>> [ 27.555303] ath10k_pci 0001:01:00.0: board_file api 2 bmi_id 0:31
>>>>>> crc32 dd6d039c
>>>>>> [ 27.568835] ath10k_pci 0001:01:00.0: htt-ver 0.0 wmi-op 6
>>>>>> htt-op 4
>>>>>> cal pre-cal-file max-sta 32 raw 0 hwcrypto 1
>>>>>> [ 27.578512] ath10k_pci 0001:01:00.0: firmware register dump:
>>>>>> [ 27.586281] ath10k_pci 0001:01:00.0: [00]: 0x01000000 0x000015B3
>>>>>> 0x009CBB38 0x00975B31
>>>>>> [ 27.592186] ath10k_pci 0001:01:00.0: [04]: 0x009CBB38 0x00060530
>>>>>> 0x00000011 0x00415760
>>>>>> [ 27.599910] ath10k_pci 0001:01:00.0: [08]: 0x00417E6C 0x00400000
>>>>>> 0x00000001 0x00422990
>>>>>> [ 27.607809] ath10k_pci 0001:01:00.0: [12]: 0x00000009 0xFFFFFFFF
>>>>>> 0x00973B25 0x00973B47
>>>>>> [ 27.615708] ath10k_pci 0001:01:00.0: [16]: 0x009CBB38 0x000CEEAC
>>>>>> 0x00000000 0x00000000
>>>>>> [ 27.623608] ath10k_pci 0001:01:00.0: [20]: 0x409CBB38 0x004068DC
>>>>>> 0x00000001 0x00403628
>>>>>> [ 27.631507] ath10k_pci 0001:01:00.0: [24]: 0x809814EF 0x0040693C
>>>>>> 0x00000049 0xC09CBB38
>>>>>> [ 27.639405] ath10k_pci 0001:01:00.0: [28]: 0x800DF216 0x004069AC
>>>>>> 0x00000004 0x00415300
>>>>>> [ 27.647305] ath10k_pci 0001:01:00.0: [32]: 0x800C383A 0x004069DC
>>>>>> 0x00415160 0x00400000
>>>>>> [ 27.655205] ath10k_pci 0001:01:00.0: [36]: 0x809800A3 0x00406A0C
>>>>>> 0x00415170 0x009C41F8
>>>>>> [ 27.663104] ath10k_pci 0001:01:00.0: [40]: 0x8098003A 0x00406A5C
>>>>>> 0x00400000 0x00400600
>>>>>> [ 27.671004] ath10k_pci 0001:01:00.0: [44]: 0x809607C1 0x00406A8C
>>>>>> 0xD8400100 0x00406A9C
>>>>>> [ 27.678902] ath10k_pci 0001:01:00.0: [48]: 0x80960892 0x00406AAC
>>>>>> 0x00000000 0x00000008
>>>>>> [ 27.686801] ath10k_pci 0001:01:00.0: [52]: 0x80960E39 0x00406ACC
>>>>>> 0x00400000 0x00400600
>>>>>> [ 27.694700] ath10k_pci 0001:01:00.0: [56]: 0x80960E9D 0x00406AEC
>>>>>> 0x00000000 0x00400600
>>>>>> [ 27.702603] ath10k_pci 0001:01:00.0: Copy Engine register dump:
>>>>>> [ 27.710506] ath10k_pci 0001:01:00.0: [00]: 0x0004a000 11 11
>>>>>> 12 11
>>>>>> [ 27.716322] ath10k_pci 0001:01:00.0: [01]: 0x0004a400 11 11
>>>>>> 10 11
>>>>>> [ 27.722917] ath10k_pci 0001:01:00.0: [02]: 0x0004a800 0 0
>>>>>> 63 0
>>>>>> [ 27.729340] ath10k_pci 0001:01:00.0: [03]: 0x0004ac00 0
>>>>>> 0 0 0
>>>>>> [ 27.735764] ath10k_pci 0001:01:00.0: [04]: 0x0004b000 0
>>>>>> 0 0 0
>>>>>> [ 27.742188] ath10k_pci 0001:01:00.0: [05]: 0x0004b400 0
>>>>>> 0 0 0
>>>>>> [ 27.748611] ath10k_pci 0001:01:00.0: [06]: 0x0004b800 0
>>>>>> 0 0 0
>>>>>> [ 27.755035] ath10k_pci 0001:01:00.0: [07]: 0x0004bc00 1
>>>>>> 1 1 1
>>>>>> [ 27.761459] ath10k_pci 0001:01:00.0: [08]: 0x0004c000 0 0
>>>>>> 127 0
>>>>>> [ 27.767884] ath10k_pci 0001:01:00.0: [09]: 0x0004c400 1
>>>>>> 1 1 1
>>>>>> [ 27.774304] ath10k_pci 0001:01:00.0: [10]: 0x0004c800 0
>>>>>> 0 0 0
>>>>>> [ 27.780731] ath10k_pci 0001:01:00.0: [11]: 0x0004cc00 0
>>>>>> 0 0 0
>>>>>> [ 28.567840] ath10k_pci 0001:01:00.0: failed to receive control
>>>>>> response completion, polling..
>>>>>> [ 29.616315] ath10k_pci 0001:01:00.0: ctl_resp never came in
>>>>>> (-110)
>>>>>> [ 29.616341] ath10k_pci 0001:01:00.0: failed to connect to HTC:
>>>>>> -110
>>>>>> [ 29.695567] ath10k_pci 0001:01:00.0: could not init core (-110)
>>>>>> [ 29.695988] ath10k_pci 0001:01:00.0: could not probe fw (-110)
>>>>>> [ 29.703824] kmodloader: done loading kernel modules from
>>>>>> /etc/modules.d/*
>>>>>> [ 29.732245] ath10k_pci 0001:01:00.0: cannot restart a device that
>>>>>> hasn't been started
>>>>>>
>>>>>> Replacing stock firmware with latest from kvalo github (here :
>>>>>> https://github.com/kvalo/ath10k-firmware/tree/master/QCA9984/hw1.0/3.6.0.1)
>>>>>>
>>>>>> I get the same result
>>>>>> Dmesg is :
>>>>>> [ 235.442819] ath10k_pci 0001:01:00.0: disabling bus mastering
>>>>>> [ 235.482588] ath10k_pci 0000:01:00.0: disabling bus mastering
>>>>>> [ 260.586372] ath10k_pci 0000:01:00.0: assign IRQ: got 67
>>>>>> [ 260.586771] ath10k_pci 0000:01:00.0: enabling bus mastering
>>>>>> [ 260.587218] ath10k_pci 0000:01:00.0: pci irq msi oper_irq_mode 2
>>>>>> irq_mode 0 reset_mode 0
>>>>>> [ 260.754869] ath10k_pci 0000:01:00.0: Direct firmware load for
>>>>>> ath10k/QCA9984/hw1.0/firmware-6.bin failed with error -2
>>>>>> [ 260.754917] ath10k_pci 0000:01:00.0: Falling back to user helper
>>>>>> [ 260.786271] firmware ath10k!QCA9984!hw1.0!firmware-6.bin:
>>>>>> firmware_loading_store: map pages failed
>>>>>> [ 260.787219] ath10k_pci 0000:01:00.0: qca9984/qca9994 hw1.0 target
>>>>>> 0x01000000 chip_id 0x00000000 sub 168c:cafe
>>>>>> [ 260.794202] ath10k_pci 0000:01:00.0: kconfig debug 0 debugfs 1
>>>>>> tracing 0 dfs 1 testmode 1
>>>>>> [ 260.806246] ath10k_pci 0000:01:00.0: firmware ver
>>>>>> 10.4-3.6.0.1-00003 api 5 features
>>>>>> no-p2p,mfp,peer-flow-ctrl,btcoex-param,allows-mesh-bcast,no-ps crc32
>>>>>> 266d70b0
>>>>>> [ 262.065148] ath10k_pci 0000:01:00.0: board_file api 2 bmi_id 0:31
>>>>>> crc32 dd6d039c
>>>>>> [ 265.858256] ath10k_pci 0000:01:00.0: firmware crashed! (guid
>>>>>> 2b6addfc-915e-437a-a7fa-3691cbf4b39e)
>>>>>> [ 265.858347] ath10k_pci 0000:01:00.0: qca9984/qca9994 hw1.0 target
>>>>>> 0x01000000 chip_id 0x00000000 sub 168c:cafe
>>>>>> [ 265.866136] ath10k_pci 0000:01:00.0: kconfig debug 0 debugfs 1
>>>>>> tracing 0 dfs 1 testmode 1
>>>>>> [ 265.881167] ath10k_pci 0000:01:00.0: firmware ver
>>>>>> 10.4-3.6.0.1-00003 api 5 features
>>>>>> no-p2p,mfp,peer-flow-ctrl,btcoex-param,allows-mesh-bcast,no-ps crc32
>>>>>> 266d70b0
>>>>>> [ 265.885460] ath10k_pci 0000:01:00.0: board_file api 2 bmi_id 0:31
>>>>>> crc32 dd6d039c
>>>>>> [ 265.898696] ath10k_pci 0000:01:00.0: htt-ver 0.0 wmi-op 6
>>>>>> htt-op 4
>>>>>> cal pre-cal-file max-sta 32 raw 0 hwcrypto 1
>>>>>> [ 265.908193] ath10k_pci 0000:01:00.0: firmware register dump:
>>>>>> [ 265.915961] ath10k_pci 0000:01:00.0: [00]: 0x01000000 0x000015B3
>>>>>> 0x009CC074 0x00975B31
>>>>>> [ 265.921864] ath10k_pci 0000:01:00.0: [04]: 0x009CC074 0x00060530
>>>>>> 0x00000011 0x004142FC
>>>>>> [ 265.929590] ath10k_pci 0000:01:00.0: [08]: 0x00416AFC 0x00400000
>>>>>> 0x00000001 0x00421F90
>>>>>> [ 265.937488] ath10k_pci 0000:01:00.0: [12]: 0x00000009 0xFFFFFFFF
>>>>>> 0x00973B25 0x00973B47
>>>>>> [ 265.945389] ath10k_pci 0000:01:00.0: [16]: 0x009CC074 0x000CFE13
>>>>>> 0x00000000 0x00000000
>>>>>> [ 265.953289] ath10k_pci 0000:01:00.0: [20]: 0x409CC074 0x004068DC
>>>>>> 0x00000001 0x00403628
>>>>>> [ 265.961187] ath10k_pci 0000:01:00.0: [24]: 0x8098153B 0x0040693C
>>>>>> 0x0000004E 0xC09CC074
>>>>>> [ 265.969087] ath10k_pci 0000:01:00.0: [28]: 0x800E026F 0x004069AC
>>>>>> 0x00000004 0x00413E60
>>>>>> [ 265.976984] ath10k_pci 0000:01:00.0: [32]: 0x800C383A 0x004069DC
>>>>>> 0x00413CB0 0x00400000
>>>>>> [ 265.984884] ath10k_pci 0000:01:00.0: [36]: 0x809800A3 0x00406A0C
>>>>>> 0x00413CC0 0x009C4750
>>>>>> [ 265.992784] ath10k_pci 0000:01:00.0: [40]: 0x8098003A 0x00406A5C
>>>>>> 0x00400000 0x00400600
>>>>>> [ 266.000684] ath10k_pci 0000:01:00.0: [44]: 0x809607C1 0x00406A8C
>>>>>> 0xD8400100 0x00406A9C
>>>>>> [ 266.008582] ath10k_pci 0000:01:00.0: [48]: 0x80960892 0x00406AAC
>>>>>> 0x00000000 0x00000008
>>>>>> [ 266.016482] ath10k_pci 0000:01:00.0: [52]: 0x80960E39 0x00406ACC
>>>>>> 0x00400000 0x00400600
>>>>>> [ 266.024381] ath10k_pci 0000:01:00.0: [56]: 0x80960E9D 0x00406AEC
>>>>>> 0x00000000 0x00400600
>>>>>> [ 266.032279] ath10k_pci 0000:01:00.0: Copy Engine register dump:
>>>>>> [ 266.040186] ath10k_pci 0000:01:00.0: [00]: 0x0004a000 12 12
>>>>>> 29 28
>>>>>> [ 266.045999] ath10k_pci 0000:01:00.0: [01]: 0x0004a400 11 11
>>>>>> 10 11
>>>>>> [ 266.052595] ath10k_pci 0000:01:00.0: [02]: 0x0004a800 0 0
>>>>>> 63 0
>>>>>> [ 266.059018] ath10k_pci 0000:01:00.0: [03]: 0x0004ac00 0
>>>>>> 0 0 0
>>>>>> [ 266.065441] ath10k_pci 0000:01:00.0: [04]: 0x0004b000 0
>>>>>> 0 0 0
>>>>>> [ 266.071865] ath10k_pci 0000:01:00.0: [05]: 0x0004b400 0
>>>>>> 0 0 0
>>>>>> [ 266.078289] ath10k_pci 0000:01:00.0: [06]: 0x0004b800 0
>>>>>> 0 0 0
>>>>>> [ 266.084713] ath10k_pci 0000:01:00.0: [07]: 0x0004bc00 1
>>>>>> 1 1 1
>>>>>> [ 266.091136] ath10k_pci 0000:01:00.0: [08]: 0x0004c000 0 0
>>>>>> 127 0
>>>>>> [ 266.097559] ath10k_pci 0000:01:00.0: [09]: 0x0004c400 1
>>>>>> 1 1 1
>>>>>> [ 266.103982] ath10k_pci 0000:01:00.0: [10]: 0x0004c800 0
>>>>>> 0 0 0
>>>>>> [ 266.110408] ath10k_pci 0000:01:00.0: [11]: 0x0004cc00 0
>>>>>> 0 0 0
>>>>>> [ 266.876609] ath10k_pci 0000:01:00.0: failed to receive control
>>>>>> response completion, polling..
>>>>>> [ 267.915918] ath10k_pci 0000:01:00.0: ctl_resp never came in
>>>>>> (-110)
>>>>>> [ 267.915970] ath10k_pci 0000:01:00.0: failed to connect to HTC:
>>>>>> -110
>>>>>> [ 267.996406] ath10k_pci 0000:01:00.0: could not init core (-110)
>>>>>> [ 267.996972] ath10k_pci 0000:01:00.0: could not probe fw (-110)
>>>>>> [ 268.001578] ath10k_pci 0001:01:00.0: assign IRQ: got 100
>>>>>> [ 268.002612] ath10k_pci 0001:01:00.0: enabling bus mastering
>>>>>> [ 268.003292] ath10k_pci 0001:01:00.0: pci irq msi oper_irq_mode 2
>>>>>> irq_mode 0 reset_mode 0
>>>>>> [ 268.032241] ath10k_pci 0000:01:00.0: cannot restart a device that
>>>>>> hasn't been started
>>>>>> [ 268.174893] ath10k_pci 0001:01:00.0: Direct firmware load for
>>>>>> ath10k/QCA9984/hw1.0/firmware-6.bin failed with error -2
>>>>>> [ 268.174936] ath10k_pci 0001:01:00.0: Falling back to user helper
>>>>>> [ 268.206575] firmware ath10k!QCA9984!hw1.0!firmware-6.bin:
>>>>>> firmware_loading_store: map pages failed
>>>>>> [ 268.207955] ath10k_pci 0001:01:00.0: qca9984/qca9994 hw1.0 target
>>>>>> 0x01000000 chip_id 0x00000000 sub 168c:cafe
>>>>>> [ 268.214521] ath10k_pci 0001:01:00.0: kconfig debug 0 debugfs 1
>>>>>> tracing 0 dfs 1 testmode 1
>>>>>> [ 268.227852] ath10k_pci 0001:01:00.0: firmware ver
>>>>>> 10.4-3.6.0.1-00003 api 5 features
>>>>>> no-p2p,mfp,peer-flow-ctrl,btcoex-param,allows-mesh-bcast,no-ps crc32
>>>>>> 266d70b0
>>>>>> [ 269.485480] ath10k_pci 0001:01:00.0: board_file api 2 bmi_id 0:31
>>>>>> crc32 dd6d039c
>>>>>> [ 273.282901] ath10k_pci 0001:01:00.0: firmware crashed! (guid
>>>>>> 28f0a68b-f881-40cb-b515-f4320b412b7a)
>>>>>> [ 273.282982] ath10k_pci 0001:01:00.0: qca9984/qca9994 hw1.0 target
>>>>>> 0x01000000 chip_id 0x00000000 sub 168c:cafe
>>>>>> [ 273.290780] ath10k_pci 0001:01:00.0: kconfig debug 0 debugfs 1
>>>>>> tracing 0 dfs 1 testmode 1
>>>>>> [ 273.306323] ath10k_pci 0001:01:00.0: firmware ver
>>>>>> 10.4-3.6.0.1-00003 api 5 features
>>>>>> no-p2p,mfp,peer-flow-ctrl,btcoex-param,allows-mesh-bcast,no-ps crc32
>>>>>> 266d70b0
>>>>>> [ 273.310039] ath10k_pci 0001:01:00.0: board_file api 2 bmi_id 0:31
>>>>>> crc32 dd6d039c
>>>>>> [ 273.323420] ath10k_pci 0001:01:00.0: htt-ver 0.0 wmi-op 6
>>>>>> htt-op 4
>>>>>> cal pre-cal-file max-sta 32 raw 0 hwcrypto 1
>>>>>> [ 273.332841] ath10k_pci 0001:01:00.0: firmware register dump:
>>>>>> [ 273.340604] ath10k_pci 0001:01:00.0: [00]: 0x01000000 0x000015B3
>>>>>> 0x009CC074 0x00975B31
>>>>>> [ 273.346508] ath10k_pci 0001:01:00.0: [04]: 0x009CC074 0x00060530
>>>>>> 0x00000011 0x004142FC
>>>>>> [ 273.354234] ath10k_pci 0001:01:00.0: [08]: 0x00416AFC 0x00400000
>>>>>> 0x00000001 0x00421F90
>>>>>> [ 273.362135] ath10k_pci 0001:01:00.0: [12]: 0x00000009 0xFFFFFFFF
>>>>>> 0x00973B25 0x00973B47
>>>>>> [ 273.370033] ath10k_pci 0001:01:00.0: [16]: 0x009CC074 0x000CFE13
>>>>>> 0x00000000 0x00000000
>>>>>> [ 273.377932] ath10k_pci 0001:01:00.0: [20]: 0x409CC074 0x004068DC
>>>>>> 0x00000001 0x00403628
>>>>>> [ 273.385833] ath10k_pci 0001:01:00.0: [24]: 0x8098153B 0x0040693C
>>>>>> 0x0000004E 0xC09CC074
>>>>>> [ 273.393732] ath10k_pci 0001:01:00.0: [28]: 0x800E026F 0x004069AC
>>>>>> 0x00000004 0x00413E60
>>>>>> [ 273.401631] ath10k_pci 0001:01:00.0: [32]: 0x800C383A 0x004069DC
>>>>>> 0x00413CB0 0x00400000
>>>>>> [ 273.409529] ath10k_pci 0001:01:00.0: [36]: 0x809800A3 0x00406A0C
>>>>>> 0x00413CC0 0x009C4750
>>>>>> [ 273.417429] ath10k_pci 0001:01:00.0: [40]: 0x8098003A 0x00406A5C
>>>>>> 0x00400000 0x00400600
>>>>>> [ 273.425329] ath10k_pci 0001:01:00.0: [44]: 0x809607C1 0x00406A8C
>>>>>> 0xD8400100 0x00406A9C
>>>>>> [ 273.433227] ath10k_pci 0001:01:00.0: [48]: 0x80960892 0x00406AAC
>>>>>> 0x00000000 0x00000008
>>>>>> [ 273.441127] ath10k_pci 0001:01:00.0: [52]: 0x80960E39 0x00406ACC
>>>>>> 0x00400000 0x00400600
>>>>>> [ 273.449027] ath10k_pci 0001:01:00.0: [56]: 0x80960E9D 0x00406AEC
>>>>>> 0x00000000 0x00400600
>>>>>> [ 273.456924] ath10k_pci 0001:01:00.0: Copy Engine register dump:
>>>>>> [ 273.464831] ath10k_pci 0001:01:00.0: [00]: 0x0004a000 12 12
>>>>>> 29 28
>>>>>> [ 273.470647] ath10k_pci 0001:01:00.0: [01]: 0x0004a400 11 11
>>>>>> 10 11
>>>>>> [ 273.477243] ath10k_pci 0001:01:00.0: [02]: 0x0004a800 0 0
>>>>>> 63 0
>>>>>> [ 273.483664] ath10k_pci 0001:01:00.0: [03]: 0x0004ac00 0
>>>>>> 0 0 0
>>>>>> [ 273.490088] ath10k_pci 0001:01:00.0: [04]: 0x0004b000 0
>>>>>> 0 0 0
>>>>>> [ 273.496512] ath10k_pci 0001:01:00.0: [05]: 0x0004b400 0
>>>>>> 0 0 0
>>>>>> [ 273.502936] ath10k_pci 0001:01:00.0: [06]: 0x0004b800 0
>>>>>> 0 0 0
>>>>>> [ 273.509360] ath10k_pci 0001:01:00.0: [07]: 0x0004bc00 1
>>>>>> 1 1 1
>>>>>> [ 273.515783] ath10k_pci 0001:01:00.0: [08]: 0x0004c000 0 0
>>>>>> 127 0
>>>>>> [ 273.522208] ath10k_pci 0001:01:00.0: [09]: 0x0004c400 1
>>>>>> 1 1 1
>>>>>> [ 273.528632] ath10k_pci 0001:01:00.0: [10]: 0x0004c800 0
>>>>>> 0 0 0
>>>>>> [ 273.535054] ath10k_pci 0001:01:00.0: [11]: 0x0004cc00 0
>>>>>> 0 0 0
>>>>>> [ 274.326491] ath10k_pci 0001:01:00.0: failed to receive control
>>>>>> response completion, polling..
>>>>>> [ 275.356625] ath10k_pci 0001:01:00.0: ctl_resp never came in
>>>>>> (-110)
>>>>>> [ 275.356672] ath10k_pci 0001:01:00.0: failed to connect to HTC:
>>>>>> -110
>>>>>> [ 275.436389] ath10k_pci 0001:01:00.0: could not init core (-110)
>>>>>> [ 275.436925] ath10k_pci 0001:01:00.0: could not probe fw (-110)
>>>>>> [ 275.472295] ath10k_pci 0001:01:00.0: cannot restart a device that
>>>>>> hasn't been started
>>>>>>
>>>>>> Various tests with others firmware from candelatech , stock LEDE
>>>>>> 17.01
>>>>>> or dd-wrt give me firmware crash also
>>>>>>
>>>>>> I already tried to enable debug info for firmware crash with 'rmmod
>>>>>> ath10k_pci; rmmod ath10k_core; modprobe ath10k_core
>>>>>> debug_mask=0xffffffff ; modprobe ath10k_pci ' but without success
>>>>>>
>>>>>> Flashing back netgear factory firmware is OK, and all is functionnal
>>>>>>
>>>>>> What can I do next ?
>>>>>>
>>>>>> Thanks all
>>>>>>
>
you may use the backup function at Administration->backup which creates
a file for download
or from commandline use "nvram backup /tmp/mybackup.bin"
for full flash backup on the r7800 do
cat /proc/mtd which shows
mtd0: 00c80000 00020000 "qcadata"
mtd1: 00500000 00020000 "APPSBL"
mtd2: 00080000 00020000 "APPSBLENV"
mtd3: 00140000 00020000 "art"
mtd4: 00140000 00020000 "artbak"
mtd5: 01e00000 00020000 "linux"
mtd6: 01be0000 00020000 "rootfs"
mtd7: 00200000 00020000 "nvram"
mtd8: 02000000 00020000 "ddwrt"
mtd9: 00640000 00020000 "reserved"
then do a backup of all partitions with
cat /dev/mtdblock0 > /tmp/mtdblock0.bin and so on
then copy them with scp to your local computer. you may need to enable
ssh server first at services->ssh
Am 20.09.2018 um 14:02 schrieb Bruno Rosset:
> Hi Sebastian,
>
> OK no problem. I can do that.
> Can you just tell me what you need ; I mean which commands to export data ?
> For nvram I guess you need 'nvram show' results ?
>
> How I can do a "full flash transfer" ?
>
> As you're dd-wrt dev, I add that I try last dd-wrt build (this one :
> https://download1.dd-wrt.com/dd-wrtv2/downloads/betas/2018/08-22-2018-r36698/netgear-r7800/factory-to-ddwrt.img)
> which not even boot. Same with kong one (this one :
> http://www.desipro.de/ddwrt/K3-AC-IPQ806X/Test/R7800-factory-to-ddwrt.img)
thats not the latest
ftp://ftp.dd-wrt.com/betas/2018/09-19-2018-r36995/netgear-r7800/factory-to-ddwrt.img
i tested this also on my devices
so if these other versions you mentioned wont boot on your device it
already looks strange since i test the r7800 always with each released
build. the builds from desipro.de are external and not watched by me
these are test builds by a contributor
>
> What I made is that I extract the board-2.bin & fiurmware-5.bin from
> the ddwrt's squashfs image and try them on the openWRT install, but
> without success also.
the board-2.bin is not the one you need. the real board data is
generated at /tmp folder from flash partition content and named
/tmp/board1.bin and /tmp/board2.bin for each of both wireless devices
>
> Best regards,
> Bruno
> Le jeu. 20 sept. 2018 à 13:07, Sebastian Gottschall
> <[email protected]> a écrit :
>> since i'm mainly the dd-wrt developer and you tested it as well with the
>> same reproduceable crash it would be nice if you could provide me a
>> nvram backup with a reproduceable crash (you should change passwords of
>> course) to my private email. so i can apply it to my device and to see
>> whats happen. if you have a beta device i just can guess that the
>> calibration data which is stored in flash memory has maybe a different
>> location, so openwrt as well as dd-wrt uses crap to initialize the
>> hardware. this is just a guess. but i have 2 r7800 factory models. you
>> can also send me a full flash backup of your device using wetransfer, so
>> i can compare the content with my device and check if there is a flash
>> layout specific different. this would help to track down the problem
>> cause and maybe find a specific workaround for such devices by detecting
>> them well
>>
>> Sebastian
>>
>> Am 20.09.2018 um 09:44 schrieb Bruno Rosset:
>>> HI Sebastian,
>>>
>>> I just flash the r7800 with the openwrt 18.06.1 factory image (here :
>>> https://downloads.openwrt.org/releases/18.06.1/targets/ipq806x/generic/openwrt-18.06.1-ipq806x-netgear_r7800-squashfs-factory.img)
>>>
>>> I forgot to mention that I get a beta hardware of the R7800, perhaps
>>> there is something different in my hardware compared to the released
>>> one.
>>>
>>> Regards,
>>> Bruno
>>> Le jeu. 20 sept. 2018 à 08:36, Sebastian Gottschall
>>> <[email protected]> a écrit :
>>>> can you tell me how to reproduce this crash? i have 2 r7800 running with
>>>> dd-wrt but no crashes
>>>>
>>>> Am 19.09.2018 um 22:37 schrieb Bruno Rosset:
>>>>> Hi all,
>>>>>
>>>>> I get a firmware crash using latest openwrt 18.06.1 on the Netgear
>>>>> R7800 with stock firmware
>>>>> Dmesg is :
>>>>> [ 13.804366] ath10k_pci 0000:01:00.0: assign IRQ: got 67
>>>>> [ 13.804805] ath10k_pci 0000:01:00.0: enabling device (0140 -> 0142)
>>>>> [ 13.804887] ath10k_pci 0000:01:00.0: enabling bus mastering
>>>>> [ 13.805346] ath10k_pci 0000:01:00.0: pci irq msi oper_irq_mode 2
>>>>> irq_mode 0 reset_mode 0
>>>>> [ 13.974787] ath10k_pci 0000:01:00.0: Direct firmware load for
>>>>> ath10k/pre-cal-pci-0000:01:00.0.bin failed with error -2
>>>>> [ 13.974827] ath10k_pci 0000:01:00.0: Falling back to user helper
>>>>> [ 14.304794] ath10k_pci 0000:01:00.0: Direct firmware load for
>>>>> ath10k/QCA9984/hw1.0/firmware-6.bin failed with error -2
>>>>> [ 14.304857] ath10k_pci 0000:01:00.0: Falling back to user helper
>>>>> [ 14.337111] firmware ath10k!QCA9984!hw1.0!firmware-6.bin:
>>>>> firmware_loading_store: map pages failed
>>>>> [ 14.702947] ath10k_pci 0000:01:00.0: qca9984/qca9994 hw1.0 target
>>>>> 0x01000000 chip_id 0x00000000 sub 168c:cafe
>>>>> [ 14.702997] ath10k_pci 0000:01:00.0: kconfig debug 0 debugfs 1
>>>>> tracing 0 dfs 1 testmode 1
>>>>> [ 14.716459] ath10k_pci 0000:01:00.0: firmware ver 10.4-3.5.3-00053
>>>>> api 5 features no-p2p,mfp,peer-flow-ctrl,btcoex-param,allows-mesh-bcast,no-ps
>>>>> crc32 4c56a386
>>>>> [ 15.973104] ath10k_pci 0000:01:00.0: board_file api 2 bmi_id 0:31
>>>>> crc32 dd6d039c
>>>>> [ 19.753460] ath10k_pci 0000:01:00.0: firmware crashed! (guid
>>>>> ca7089d2-df9a-4f9d-8fa6-d1b908cf3220)
>>>>> [ 19.753494] ath10k_pci 0000:01:00.0: qca9984/qca9994 hw1.0 target
>>>>> 0x01000000 chip_id 0x00000000 sub 168c:cafe
>>>>> [ 19.761307] ath10k_pci 0000:01:00.0: kconfig debug 0 debugfs 1
>>>>> tracing 0 dfs 1 testmode 1
>>>>> [ 19.773202] ath10k_pci 0000:01:00.0: firmware ver 10.4-3.5.3-00053
>>>>> api 5 features no-p2p,mfp,peer-flow-ctrl,btcoex-param,allows-mesh-bcast,no-ps
>>>>> crc32 4c56a386
>>>>> [ 19.779887] ath10k_pci 0000:01:00.0: board_file api 2 bmi_id 0:31
>>>>> crc32 dd6d039c
>>>>> [ 19.793511] ath10k_pci 0000:01:00.0: htt-ver 0.0 wmi-op 6 htt-op 4
>>>>> cal pre-cal-file max-sta 32 raw 0 hwcrypto 1
>>>>> [ 19.803176] ath10k_pci 0000:01:00.0: firmware register dump:
>>>>> [ 19.810956] ath10k_pci 0000:01:00.0: [00]: 0x01000000 0x000015B3
>>>>> 0x009CBB38 0x00975B31
>>>>> [ 19.816861] ath10k_pci 0000:01:00.0: [04]: 0x009CBB38 0x00060530
>>>>> 0x00000011 0x00415760
>>>>> [ 19.824587] ath10k_pci 0000:01:00.0: [08]: 0x00417E6C 0x00400000
>>>>> 0x00000001 0x00422990
>>>>> [ 19.832485] ath10k_pci 0000:01:00.0: [12]: 0x00000009 0xFFFFFFFF
>>>>> 0x00973B25 0x00973B47
>>>>> [ 19.840384] ath10k_pci 0000:01:00.0: [16]: 0x009CBB38 0x000CEEA7
>>>>> 0x00000000 0x00000000
>>>>> [ 19.848284] ath10k_pci 0000:01:00.0: [20]: 0x409CBB38 0x004068DC
>>>>> 0x00000001 0x00403628
>>>>> [ 19.856183] ath10k_pci 0000:01:00.0: [24]: 0x809814EF 0x0040693C
>>>>> 0x00000049 0xC09CBB38
>>>>> [ 19.864083] ath10k_pci 0000:01:00.0: [28]: 0x800DF216 0x004069AC
>>>>> 0x00000004 0x00415300
>>>>> [ 19.871983] ath10k_pci 0000:01:00.0: [32]: 0x800C383A 0x004069DC
>>>>> 0x00415160 0x00400000
>>>>> [ 19.879881] ath10k_pci 0000:01:00.0: [36]: 0x809800A3 0x00406A0C
>>>>> 0x00415170 0x009C41F8
>>>>> [ 19.887781] ath10k_pci 0000:01:00.0: [40]: 0x8098003A 0x00406A5C
>>>>> 0x00400000 0x00400600
>>>>> [ 19.895680] ath10k_pci 0000:01:00.0: [44]: 0x809607C1 0x00406A8C
>>>>> 0xD8400100 0x00406A9C
>>>>> [ 19.903579] ath10k_pci 0000:01:00.0: [48]: 0x80960892 0x00406AAC
>>>>> 0x00000000 0x00000008
>>>>> [ 19.911479] ath10k_pci 0000:01:00.0: [52]: 0x80960E39 0x00406ACC
>>>>> 0x00400000 0x00400600
>>>>> [ 19.919378] ath10k_pci 0000:01:00.0: [56]: 0x80960E9D 0x00406AEC
>>>>> 0x00000000 0x00400600
>>>>> [ 19.927277] ath10k_pci 0000:01:00.0: Copy Engine register dump:
>>>>> [ 19.935181] ath10k_pci 0000:01:00.0: [00]: 0x0004a000 11 11 12 11
>>>>> [ 19.940994] ath10k_pci 0000:01:00.0: [01]: 0x0004a400 11 11 10 11
>>>>> [ 19.947590] ath10k_pci 0000:01:00.0: [02]: 0x0004a800 0 0 63 0
>>>>> [ 19.954014] ath10k_pci 0000:01:00.0: [03]: 0x0004ac00 0 0 0 0
>>>>> [ 19.960439] ath10k_pci 0000:01:00.0: [04]: 0x0004b000 0 0 0 0
>>>>> [ 19.966862] ath10k_pci 0000:01:00.0: [05]: 0x0004b400 0 0 0 0
>>>>> [ 19.973285] ath10k_pci 0000:01:00.0: [06]: 0x0004b800 0 0 0 0
>>>>> [ 19.979709] ath10k_pci 0000:01:00.0: [07]: 0x0004bc00 1 1 1 1
>>>>> [ 19.986132] ath10k_pci 0000:01:00.0: [08]: 0x0004c000 0 0 127 0
>>>>> [ 19.992556] ath10k_pci 0000:01:00.0: [09]: 0x0004c400 1 1 1 1
>>>>> [ 19.998980] ath10k_pci 0000:01:00.0: [10]: 0x0004c800 0 0 0 0
>>>>> [ 20.005403] ath10k_pci 0000:01:00.0: [11]: 0x0004cc00 0 0 0 0
>>>>> [ 20.795948] ath10k_pci 0000:01:00.0: failed to receive control
>>>>> response completion, polling..
>>>>> [ 21.835766] ath10k_pci 0000:01:00.0: ctl_resp never came in (-110)
>>>>> [ 21.835810] ath10k_pci 0000:01:00.0: failed to connect to HTC: -110
>>>>> [ 21.915174] ath10k_pci 0000:01:00.0: could not init core (-110)
>>>>> [ 21.915620] ath10k_pci 0000:01:00.0: could not probe fw (-110)
>>>>> [ 21.920266] ath10k_pci 0001:01:00.0: assign IRQ: got 100
>>>>> [ 21.921197] ath10k_pci 0001:01:00.0: enabling device (0140 -> 0142)
>>>>> [ 21.926032] ath10k_pci 0001:01:00.0: enabling bus mastering
>>>>> [ 21.926715] ath10k_pci 0001:01:00.0: pci irq msi oper_irq_mode 2
>>>>> irq_mode 0 reset_mode 0
>>>>> [ 21.962217] ath10k_pci 0000:01:00.0: cannot restart a device that
>>>>> hasn't been started
>>>>> [ 22.104728] ath10k_pci 0001:01:00.0: Direct firmware load for
>>>>> ath10k/pre-cal-pci-0001:01:00.0.bin failed with error -2
>>>>> [ 22.104769] ath10k_pci 0001:01:00.0: Falling back to user helper
>>>>> [ 22.424677] ath10k_pci 0001:01:00.0: Direct firmware load for
>>>>> ath10k/QCA9984/hw1.0/firmware-6.bin failed with error -2
>>>>> [ 22.424736] ath10k_pci 0001:01:00.0: Falling back to user helper
>>>>> [ 22.462387] firmware ath10k!QCA9984!hw1.0!firmware-6.bin:
>>>>> firmware_loading_store: map pages failed
>>>>> [ 22.463844] ath10k_pci 0001:01:00.0: qca9984/qca9994 hw1.0 target
>>>>> 0x01000000 chip_id 0x00000000 sub 168c:cafe
>>>>> [ 22.470250] ath10k_pci 0001:01:00.0: kconfig debug 0 debugfs 1
>>>>> tracing 0 dfs 1 testmode 1
>>>>> [ 22.483627] ath10k_pci 0001:01:00.0: firmware ver 10.4-3.5.3-00053
>>>>> api 5 features no-p2p,mfp,peer-flow-ctrl,btcoex-param,allows-mesh-bcast,no-ps
>>>>> crc32 4c56a386
>>>>> [ 23.743494] ath10k_pci 0001:01:00.0: board_file api 2 bmi_id 0:31
>>>>> crc32 dd6d039c
>>>>> [ 27.528777] ath10k_pci 0001:01:00.0: firmware crashed! (guid
>>>>> 2112523e-3948-4925-b383-9e672937c6d5)
>>>>> [ 27.528819] ath10k_pci 0001:01:00.0: qca9984/qca9994 hw1.0 target
>>>>> 0x01000000 chip_id 0x00000000 sub 168c:cafe
>>>>> [ 27.536696] ath10k_pci 0001:01:00.0: kconfig debug 0 debugfs 1
>>>>> tracing 0 dfs 1 testmode 1
>>>>> [ 27.548985] ath10k_pci 0001:01:00.0: firmware ver 10.4-3.5.3-00053
>>>>> api 5 features no-p2p,mfp,peer-flow-ctrl,btcoex-param,allows-mesh-bcast,no-ps
>>>>> crc32 4c56a386
>>>>> [ 27.555303] ath10k_pci 0001:01:00.0: board_file api 2 bmi_id 0:31
>>>>> crc32 dd6d039c
>>>>> [ 27.568835] ath10k_pci 0001:01:00.0: htt-ver 0.0 wmi-op 6 htt-op 4
>>>>> cal pre-cal-file max-sta 32 raw 0 hwcrypto 1
>>>>> [ 27.578512] ath10k_pci 0001:01:00.0: firmware register dump:
>>>>> [ 27.586281] ath10k_pci 0001:01:00.0: [00]: 0x01000000 0x000015B3
>>>>> 0x009CBB38 0x00975B31
>>>>> [ 27.592186] ath10k_pci 0001:01:00.0: [04]: 0x009CBB38 0x00060530
>>>>> 0x00000011 0x00415760
>>>>> [ 27.599910] ath10k_pci 0001:01:00.0: [08]: 0x00417E6C 0x00400000
>>>>> 0x00000001 0x00422990
>>>>> [ 27.607809] ath10k_pci 0001:01:00.0: [12]: 0x00000009 0xFFFFFFFF
>>>>> 0x00973B25 0x00973B47
>>>>> [ 27.615708] ath10k_pci 0001:01:00.0: [16]: 0x009CBB38 0x000CEEAC
>>>>> 0x00000000 0x00000000
>>>>> [ 27.623608] ath10k_pci 0001:01:00.0: [20]: 0x409CBB38 0x004068DC
>>>>> 0x00000001 0x00403628
>>>>> [ 27.631507] ath10k_pci 0001:01:00.0: [24]: 0x809814EF 0x0040693C
>>>>> 0x00000049 0xC09CBB38
>>>>> [ 27.639405] ath10k_pci 0001:01:00.0: [28]: 0x800DF216 0x004069AC
>>>>> 0x00000004 0x00415300
>>>>> [ 27.647305] ath10k_pci 0001:01:00.0: [32]: 0x800C383A 0x004069DC
>>>>> 0x00415160 0x00400000
>>>>> [ 27.655205] ath10k_pci 0001:01:00.0: [36]: 0x809800A3 0x00406A0C
>>>>> 0x00415170 0x009C41F8
>>>>> [ 27.663104] ath10k_pci 0001:01:00.0: [40]: 0x8098003A 0x00406A5C
>>>>> 0x00400000 0x00400600
>>>>> [ 27.671004] ath10k_pci 0001:01:00.0: [44]: 0x809607C1 0x00406A8C
>>>>> 0xD8400100 0x00406A9C
>>>>> [ 27.678902] ath10k_pci 0001:01:00.0: [48]: 0x80960892 0x00406AAC
>>>>> 0x00000000 0x00000008
>>>>> [ 27.686801] ath10k_pci 0001:01:00.0: [52]: 0x80960E39 0x00406ACC
>>>>> 0x00400000 0x00400600
>>>>> [ 27.694700] ath10k_pci 0001:01:00.0: [56]: 0x80960E9D 0x00406AEC
>>>>> 0x00000000 0x00400600
>>>>> [ 27.702603] ath10k_pci 0001:01:00.0: Copy Engine register dump:
>>>>> [ 27.710506] ath10k_pci 0001:01:00.0: [00]: 0x0004a000 11 11 12 11
>>>>> [ 27.716322] ath10k_pci 0001:01:00.0: [01]: 0x0004a400 11 11 10 11
>>>>> [ 27.722917] ath10k_pci 0001:01:00.0: [02]: 0x0004a800 0 0 63 0
>>>>> [ 27.729340] ath10k_pci 0001:01:00.0: [03]: 0x0004ac00 0 0 0 0
>>>>> [ 27.735764] ath10k_pci 0001:01:00.0: [04]: 0x0004b000 0 0 0 0
>>>>> [ 27.742188] ath10k_pci 0001:01:00.0: [05]: 0x0004b400 0 0 0 0
>>>>> [ 27.748611] ath10k_pci 0001:01:00.0: [06]: 0x0004b800 0 0 0 0
>>>>> [ 27.755035] ath10k_pci 0001:01:00.0: [07]: 0x0004bc00 1 1 1 1
>>>>> [ 27.761459] ath10k_pci 0001:01:00.0: [08]: 0x0004c000 0 0 127 0
>>>>> [ 27.767884] ath10k_pci 0001:01:00.0: [09]: 0x0004c400 1 1 1 1
>>>>> [ 27.774304] ath10k_pci 0001:01:00.0: [10]: 0x0004c800 0 0 0 0
>>>>> [ 27.780731] ath10k_pci 0001:01:00.0: [11]: 0x0004cc00 0 0 0 0
>>>>> [ 28.567840] ath10k_pci 0001:01:00.0: failed to receive control
>>>>> response completion, polling..
>>>>> [ 29.616315] ath10k_pci 0001:01:00.0: ctl_resp never came in (-110)
>>>>> [ 29.616341] ath10k_pci 0001:01:00.0: failed to connect to HTC: -110
>>>>> [ 29.695567] ath10k_pci 0001:01:00.0: could not init core (-110)
>>>>> [ 29.695988] ath10k_pci 0001:01:00.0: could not probe fw (-110)
>>>>> [ 29.703824] kmodloader: done loading kernel modules from /etc/modules.d/*
>>>>> [ 29.732245] ath10k_pci 0001:01:00.0: cannot restart a device that
>>>>> hasn't been started
>>>>>
>>>>> Replacing stock firmware with latest from kvalo github (here :
>>>>> https://github.com/kvalo/ath10k-firmware/tree/master/QCA9984/hw1.0/3.6.0.1)
>>>>> I get the same result
>>>>> Dmesg is :
>>>>> [ 235.442819] ath10k_pci 0001:01:00.0: disabling bus mastering
>>>>> [ 235.482588] ath10k_pci 0000:01:00.0: disabling bus mastering
>>>>> [ 260.586372] ath10k_pci 0000:01:00.0: assign IRQ: got 67
>>>>> [ 260.586771] ath10k_pci 0000:01:00.0: enabling bus mastering
>>>>> [ 260.587218] ath10k_pci 0000:01:00.0: pci irq msi oper_irq_mode 2
>>>>> irq_mode 0 reset_mode 0
>>>>> [ 260.754869] ath10k_pci 0000:01:00.0: Direct firmware load for
>>>>> ath10k/QCA9984/hw1.0/firmware-6.bin failed with error -2
>>>>> [ 260.754917] ath10k_pci 0000:01:00.0: Falling back to user helper
>>>>> [ 260.786271] firmware ath10k!QCA9984!hw1.0!firmware-6.bin:
>>>>> firmware_loading_store: map pages failed
>>>>> [ 260.787219] ath10k_pci 0000:01:00.0: qca9984/qca9994 hw1.0 target
>>>>> 0x01000000 chip_id 0x00000000 sub 168c:cafe
>>>>> [ 260.794202] ath10k_pci 0000:01:00.0: kconfig debug 0 debugfs 1
>>>>> tracing 0 dfs 1 testmode 1
>>>>> [ 260.806246] ath10k_pci 0000:01:00.0: firmware ver
>>>>> 10.4-3.6.0.1-00003 api 5 features
>>>>> no-p2p,mfp,peer-flow-ctrl,btcoex-param,allows-mesh-bcast,no-ps crc32
>>>>> 266d70b0
>>>>> [ 262.065148] ath10k_pci 0000:01:00.0: board_file api 2 bmi_id 0:31
>>>>> crc32 dd6d039c
>>>>> [ 265.858256] ath10k_pci 0000:01:00.0: firmware crashed! (guid
>>>>> 2b6addfc-915e-437a-a7fa-3691cbf4b39e)
>>>>> [ 265.858347] ath10k_pci 0000:01:00.0: qca9984/qca9994 hw1.0 target
>>>>> 0x01000000 chip_id 0x00000000 sub 168c:cafe
>>>>> [ 265.866136] ath10k_pci 0000:01:00.0: kconfig debug 0 debugfs 1
>>>>> tracing 0 dfs 1 testmode 1
>>>>> [ 265.881167] ath10k_pci 0000:01:00.0: firmware ver
>>>>> 10.4-3.6.0.1-00003 api 5 features
>>>>> no-p2p,mfp,peer-flow-ctrl,btcoex-param,allows-mesh-bcast,no-ps crc32
>>>>> 266d70b0
>>>>> [ 265.885460] ath10k_pci 0000:01:00.0: board_file api 2 bmi_id 0:31
>>>>> crc32 dd6d039c
>>>>> [ 265.898696] ath10k_pci 0000:01:00.0: htt-ver 0.0 wmi-op 6 htt-op 4
>>>>> cal pre-cal-file max-sta 32 raw 0 hwcrypto 1
>>>>> [ 265.908193] ath10k_pci 0000:01:00.0: firmware register dump:
>>>>> [ 265.915961] ath10k_pci 0000:01:00.0: [00]: 0x01000000 0x000015B3
>>>>> 0x009CC074 0x00975B31
>>>>> [ 265.921864] ath10k_pci 0000:01:00.0: [04]: 0x009CC074 0x00060530
>>>>> 0x00000011 0x004142FC
>>>>> [ 265.929590] ath10k_pci 0000:01:00.0: [08]: 0x00416AFC 0x00400000
>>>>> 0x00000001 0x00421F90
>>>>> [ 265.937488] ath10k_pci 0000:01:00.0: [12]: 0x00000009 0xFFFFFFFF
>>>>> 0x00973B25 0x00973B47
>>>>> [ 265.945389] ath10k_pci 0000:01:00.0: [16]: 0x009CC074 0x000CFE13
>>>>> 0x00000000 0x00000000
>>>>> [ 265.953289] ath10k_pci 0000:01:00.0: [20]: 0x409CC074 0x004068DC
>>>>> 0x00000001 0x00403628
>>>>> [ 265.961187] ath10k_pci 0000:01:00.0: [24]: 0x8098153B 0x0040693C
>>>>> 0x0000004E 0xC09CC074
>>>>> [ 265.969087] ath10k_pci 0000:01:00.0: [28]: 0x800E026F 0x004069AC
>>>>> 0x00000004 0x00413E60
>>>>> [ 265.976984] ath10k_pci 0000:01:00.0: [32]: 0x800C383A 0x004069DC
>>>>> 0x00413CB0 0x00400000
>>>>> [ 265.984884] ath10k_pci 0000:01:00.0: [36]: 0x809800A3 0x00406A0C
>>>>> 0x00413CC0 0x009C4750
>>>>> [ 265.992784] ath10k_pci 0000:01:00.0: [40]: 0x8098003A 0x00406A5C
>>>>> 0x00400000 0x00400600
>>>>> [ 266.000684] ath10k_pci 0000:01:00.0: [44]: 0x809607C1 0x00406A8C
>>>>> 0xD8400100 0x00406A9C
>>>>> [ 266.008582] ath10k_pci 0000:01:00.0: [48]: 0x80960892 0x00406AAC
>>>>> 0x00000000 0x00000008
>>>>> [ 266.016482] ath10k_pci 0000:01:00.0: [52]: 0x80960E39 0x00406ACC
>>>>> 0x00400000 0x00400600
>>>>> [ 266.024381] ath10k_pci 0000:01:00.0: [56]: 0x80960E9D 0x00406AEC
>>>>> 0x00000000 0x00400600
>>>>> [ 266.032279] ath10k_pci 0000:01:00.0: Copy Engine register dump:
>>>>> [ 266.040186] ath10k_pci 0000:01:00.0: [00]: 0x0004a000 12 12 29 28
>>>>> [ 266.045999] ath10k_pci 0000:01:00.0: [01]: 0x0004a400 11 11 10 11
>>>>> [ 266.052595] ath10k_pci 0000:01:00.0: [02]: 0x0004a800 0 0 63 0
>>>>> [ 266.059018] ath10k_pci 0000:01:00.0: [03]: 0x0004ac00 0 0 0 0
>>>>> [ 266.065441] ath10k_pci 0000:01:00.0: [04]: 0x0004b000 0 0 0 0
>>>>> [ 266.071865] ath10k_pci 0000:01:00.0: [05]: 0x0004b400 0 0 0 0
>>>>> [ 266.078289] ath10k_pci 0000:01:00.0: [06]: 0x0004b800 0 0 0 0
>>>>> [ 266.084713] ath10k_pci 0000:01:00.0: [07]: 0x0004bc00 1 1 1 1
>>>>> [ 266.091136] ath10k_pci 0000:01:00.0: [08]: 0x0004c000 0 0 127 0
>>>>> [ 266.097559] ath10k_pci 0000:01:00.0: [09]: 0x0004c400 1 1 1 1
>>>>> [ 266.103982] ath10k_pci 0000:01:00.0: [10]: 0x0004c800 0 0 0 0
>>>>> [ 266.110408] ath10k_pci 0000:01:00.0: [11]: 0x0004cc00 0 0 0 0
>>>>> [ 266.876609] ath10k_pci 0000:01:00.0: failed to receive control
>>>>> response completion, polling..
>>>>> [ 267.915918] ath10k_pci 0000:01:00.0: ctl_resp never came in (-110)
>>>>> [ 267.915970] ath10k_pci 0000:01:00.0: failed to connect to HTC: -110
>>>>> [ 267.996406] ath10k_pci 0000:01:00.0: could not init core (-110)
>>>>> [ 267.996972] ath10k_pci 0000:01:00.0: could not probe fw (-110)
>>>>> [ 268.001578] ath10k_pci 0001:01:00.0: assign IRQ: got 100
>>>>> [ 268.002612] ath10k_pci 0001:01:00.0: enabling bus mastering
>>>>> [ 268.003292] ath10k_pci 0001:01:00.0: pci irq msi oper_irq_mode 2
>>>>> irq_mode 0 reset_mode 0
>>>>> [ 268.032241] ath10k_pci 0000:01:00.0: cannot restart a device that
>>>>> hasn't been started
>>>>> [ 268.174893] ath10k_pci 0001:01:00.0: Direct firmware load for
>>>>> ath10k/QCA9984/hw1.0/firmware-6.bin failed with error -2
>>>>> [ 268.174936] ath10k_pci 0001:01:00.0: Falling back to user helper
>>>>> [ 268.206575] firmware ath10k!QCA9984!hw1.0!firmware-6.bin:
>>>>> firmware_loading_store: map pages failed
>>>>> [ 268.207955] ath10k_pci 0001:01:00.0: qca9984/qca9994 hw1.0 target
>>>>> 0x01000000 chip_id 0x00000000 sub 168c:cafe
>>>>> [ 268.214521] ath10k_pci 0001:01:00.0: kconfig debug 0 debugfs 1
>>>>> tracing 0 dfs 1 testmode 1
>>>>> [ 268.227852] ath10k_pci 0001:01:00.0: firmware ver
>>>>> 10.4-3.6.0.1-00003 api 5 features
>>>>> no-p2p,mfp,peer-flow-ctrl,btcoex-param,allows-mesh-bcast,no-ps crc32
>>>>> 266d70b0
>>>>> [ 269.485480] ath10k_pci 0001:01:00.0: board_file api 2 bmi_id 0:31
>>>>> crc32 dd6d039c
>>>>> [ 273.282901] ath10k_pci 0001:01:00.0: firmware crashed! (guid
>>>>> 28f0a68b-f881-40cb-b515-f4320b412b7a)
>>>>> [ 273.282982] ath10k_pci 0001:01:00.0: qca9984/qca9994 hw1.0 target
>>>>> 0x01000000 chip_id 0x00000000 sub 168c:cafe
>>>>> [ 273.290780] ath10k_pci 0001:01:00.0: kconfig debug 0 debugfs 1
>>>>> tracing 0 dfs 1 testmode 1
>>>>> [ 273.306323] ath10k_pci 0001:01:00.0: firmware ver
>>>>> 10.4-3.6.0.1-00003 api 5 features
>>>>> no-p2p,mfp,peer-flow-ctrl,btcoex-param,allows-mesh-bcast,no-ps crc32
>>>>> 266d70b0
>>>>> [ 273.310039] ath10k_pci 0001:01:00.0: board_file api 2 bmi_id 0:31
>>>>> crc32 dd6d039c
>>>>> [ 273.323420] ath10k_pci 0001:01:00.0: htt-ver 0.0 wmi-op 6 htt-op 4
>>>>> cal pre-cal-file max-sta 32 raw 0 hwcrypto 1
>>>>> [ 273.332841] ath10k_pci 0001:01:00.0: firmware register dump:
>>>>> [ 273.340604] ath10k_pci 0001:01:00.0: [00]: 0x01000000 0x000015B3
>>>>> 0x009CC074 0x00975B31
>>>>> [ 273.346508] ath10k_pci 0001:01:00.0: [04]: 0x009CC074 0x00060530
>>>>> 0x00000011 0x004142FC
>>>>> [ 273.354234] ath10k_pci 0001:01:00.0: [08]: 0x00416AFC 0x00400000
>>>>> 0x00000001 0x00421F90
>>>>> [ 273.362135] ath10k_pci 0001:01:00.0: [12]: 0x00000009 0xFFFFFFFF
>>>>> 0x00973B25 0x00973B47
>>>>> [ 273.370033] ath10k_pci 0001:01:00.0: [16]: 0x009CC074 0x000CFE13
>>>>> 0x00000000 0x00000000
>>>>> [ 273.377932] ath10k_pci 0001:01:00.0: [20]: 0x409CC074 0x004068DC
>>>>> 0x00000001 0x00403628
>>>>> [ 273.385833] ath10k_pci 0001:01:00.0: [24]: 0x8098153B 0x0040693C
>>>>> 0x0000004E 0xC09CC074
>>>>> [ 273.393732] ath10k_pci 0001:01:00.0: [28]: 0x800E026F 0x004069AC
>>>>> 0x00000004 0x00413E60
>>>>> [ 273.401631] ath10k_pci 0001:01:00.0: [32]: 0x800C383A 0x004069DC
>>>>> 0x00413CB0 0x00400000
>>>>> [ 273.409529] ath10k_pci 0001:01:00.0: [36]: 0x809800A3 0x00406A0C
>>>>> 0x00413CC0 0x009C4750
>>>>> [ 273.417429] ath10k_pci 0001:01:00.0: [40]: 0x8098003A 0x00406A5C
>>>>> 0x00400000 0x00400600
>>>>> [ 273.425329] ath10k_pci 0001:01:00.0: [44]: 0x809607C1 0x00406A8C
>>>>> 0xD8400100 0x00406A9C
>>>>> [ 273.433227] ath10k_pci 0001:01:00.0: [48]: 0x80960892 0x00406AAC
>>>>> 0x00000000 0x00000008
>>>>> [ 273.441127] ath10k_pci 0001:01:00.0: [52]: 0x80960E39 0x00406ACC
>>>>> 0x00400000 0x00400600
>>>>> [ 273.449027] ath10k_pci 0001:01:00.0: [56]: 0x80960E9D 0x00406AEC
>>>>> 0x00000000 0x00400600
>>>>> [ 273.456924] ath10k_pci 0001:01:00.0: Copy Engine register dump:
>>>>> [ 273.464831] ath10k_pci 0001:01:00.0: [00]: 0x0004a000 12 12 29 28
>>>>> [ 273.470647] ath10k_pci 0001:01:00.0: [01]: 0x0004a400 11 11 10 11
>>>>> [ 273.477243] ath10k_pci 0001:01:00.0: [02]: 0x0004a800 0 0 63 0
>>>>> [ 273.483664] ath10k_pci 0001:01:00.0: [03]: 0x0004ac00 0 0 0 0
>>>>> [ 273.490088] ath10k_pci 0001:01:00.0: [04]: 0x0004b000 0 0 0 0
>>>>> [ 273.496512] ath10k_pci 0001:01:00.0: [05]: 0x0004b400 0 0 0 0
>>>>> [ 273.502936] ath10k_pci 0001:01:00.0: [06]: 0x0004b800 0 0 0 0
>>>>> [ 273.509360] ath10k_pci 0001:01:00.0: [07]: 0x0004bc00 1 1 1 1
>>>>> [ 273.515783] ath10k_pci 0001:01:00.0: [08]: 0x0004c000 0 0 127 0
>>>>> [ 273.522208] ath10k_pci 0001:01:00.0: [09]: 0x0004c400 1 1 1 1
>>>>> [ 273.528632] ath10k_pci 0001:01:00.0: [10]: 0x0004c800 0 0 0 0
>>>>> [ 273.535054] ath10k_pci 0001:01:00.0: [11]: 0x0004cc00 0 0 0 0
>>>>> [ 274.326491] ath10k_pci 0001:01:00.0: failed to receive control
>>>>> response completion, polling..
>>>>> [ 275.356625] ath10k_pci 0001:01:00.0: ctl_resp never came in (-110)
>>>>> [ 275.356672] ath10k_pci 0001:01:00.0: failed to connect to HTC: -110
>>>>> [ 275.436389] ath10k_pci 0001:01:00.0: could not init core (-110)
>>>>> [ 275.436925] ath10k_pci 0001:01:00.0: could not probe fw (-110)
>>>>> [ 275.472295] ath10k_pci 0001:01:00.0: cannot restart a device that
>>>>> hasn't been started
>>>>>
>>>>> Various tests with others firmware from candelatech , stock LEDE 17.01
>>>>> or dd-wrt give me firmware crash also
>>>>>
>>>>> I already tried to enable debug info for firmware crash with 'rmmod
>>>>> ath10k_pci; rmmod ath10k_core; modprobe ath10k_core
>>>>> debug_mask=0xffffffff ; modprobe ath10k_pci ' but without success
>>>>>
>>>>> Flashing back netgear factory firmware is OK, and all is functionnal
>>>>>
>>>>> What can I do next ?
>>>>>
>>>>> Thanks all
>>>>>
Hi,
Done, thanks
Le mer. 19 sept. 2018 =C3=A0 22:45, Ben Greear <[email protected]> a =
=C3=A9crit :
>
> On 09/19/2018 01:37 PM, Bruno Rosset wrote:
> > Hi all,
> >
>
> > Various tests with others firmware from candelatech , stock LEDE 17.01
> > or dd-wrt give me firmware crash also
>
> Please open a bug for the candela firmware crash, I might be able to figu=
re
> out why it crashes:
>
> https://github.com/greearb/ath10k-ct/issues
>
> https://www.candelatech.com/ath10k-bugs.php
>
> Thanks,
> Ben
>
>
> --
> Ben Greear <[email protected]>
> Candela Technologies Inc http://www.candelatech.com
>
HI Sebastian,
I just flash the r7800 with the openwrt 18.06.1 factory image (here :
https://downloads.openwrt.org/releases/18.06.1/targets/ipq806x/generic/open=
wrt-18.06.1-ipq806x-netgear_r7800-squashfs-factory.img)
I forgot to mention that I get a beta hardware of the R7800, perhaps
there is something different in my hardware compared to the released
one.
Regards,
Bruno
Le jeu. 20 sept. 2018 =C3=A0 08:36, Sebastian Gottschall
<[email protected]> a =C3=A9crit :
>
> can you tell me how to reproduce this crash? i have 2 r7800 running with
> dd-wrt but no crashes
>
> Am 19.09.2018 um 22:37 schrieb Bruno Rosset:
> > Hi all,
> >
> > I get a firmware crash using latest openwrt 18.06.1 on the Netgear
> > R7800 with stock firmware
> > Dmesg is :
> > [ 13.804366] ath10k_pci 0000:01:00.0: assign IRQ: got 67
> > [ 13.804805] ath10k_pci 0000:01:00.0: enabling device (0140 -> 0142)
> > [ 13.804887] ath10k_pci 0000:01:00.0: enabling bus mastering
> > [ 13.805346] ath10k_pci 0000:01:00.0: pci irq msi oper_irq_mode 2
> > irq_mode 0 reset_mode 0
> > [ 13.974787] ath10k_pci 0000:01:00.0: Direct firmware load for
> > ath10k/pre-cal-pci-0000:01:00.0.bin failed with error -2
> > [ 13.974827] ath10k_pci 0000:01:00.0: Falling back to user helper
> > [ 14.304794] ath10k_pci 0000:01:00.0: Direct firmware load for
> > ath10k/QCA9984/hw1.0/firmware-6.bin failed with error -2
> > [ 14.304857] ath10k_pci 0000:01:00.0: Falling back to user helper
> > [ 14.337111] firmware ath10k!QCA9984!hw1.0!firmware-6.bin:
> > firmware_loading_store: map pages failed
> > [ 14.702947] ath10k_pci 0000:01:00.0: qca9984/qca9994 hw1.0 target
> > 0x01000000 chip_id 0x00000000 sub 168c:cafe
> > [ 14.702997] ath10k_pci 0000:01:00.0: kconfig debug 0 debugfs 1
> > tracing 0 dfs 1 testmode 1
> > [ 14.716459] ath10k_pci 0000:01:00.0: firmware ver 10.4-3.5.3-00053
> > api 5 features no-p2p,mfp,peer-flow-ctrl,btcoex-param,allows-mesh-bcast=
,no-ps
> > crc32 4c56a386
> > [ 15.973104] ath10k_pci 0000:01:00.0: board_file api 2 bmi_id 0:31
> > crc32 dd6d039c
> > [ 19.753460] ath10k_pci 0000:01:00.0: firmware crashed! (guid
> > ca7089d2-df9a-4f9d-8fa6-d1b908cf3220)
> > [ 19.753494] ath10k_pci 0000:01:00.0: qca9984/qca9994 hw1.0 target
> > 0x01000000 chip_id 0x00000000 sub 168c:cafe
> > [ 19.761307] ath10k_pci 0000:01:00.0: kconfig debug 0 debugfs 1
> > tracing 0 dfs 1 testmode 1
> > [ 19.773202] ath10k_pci 0000:01:00.0: firmware ver 10.4-3.5.3-00053
> > api 5 features no-p2p,mfp,peer-flow-ctrl,btcoex-param,allows-mesh-bcast=
,no-ps
> > crc32 4c56a386
> > [ 19.779887] ath10k_pci 0000:01:00.0: board_file api 2 bmi_id 0:31
> > crc32 dd6d039c
> > [ 19.793511] ath10k_pci 0000:01:00.0: htt-ver 0.0 wmi-op 6 htt-op 4
> > cal pre-cal-file max-sta 32 raw 0 hwcrypto 1
> > [ 19.803176] ath10k_pci 0000:01:00.0: firmware register dump:
> > [ 19.810956] ath10k_pci 0000:01:00.0: [00]: 0x01000000 0x000015B3
> > 0x009CBB38 0x00975B31
> > [ 19.816861] ath10k_pci 0000:01:00.0: [04]: 0x009CBB38 0x00060530
> > 0x00000011 0x00415760
> > [ 19.824587] ath10k_pci 0000:01:00.0: [08]: 0x00417E6C 0x00400000
> > 0x00000001 0x00422990
> > [ 19.832485] ath10k_pci 0000:01:00.0: [12]: 0x00000009 0xFFFFFFFF
> > 0x00973B25 0x00973B47
> > [ 19.840384] ath10k_pci 0000:01:00.0: [16]: 0x009CBB38 0x000CEEA7
> > 0x00000000 0x00000000
> > [ 19.848284] ath10k_pci 0000:01:00.0: [20]: 0x409CBB38 0x004068DC
> > 0x00000001 0x00403628
> > [ 19.856183] ath10k_pci 0000:01:00.0: [24]: 0x809814EF 0x0040693C
> > 0x00000049 0xC09CBB38
> > [ 19.864083] ath10k_pci 0000:01:00.0: [28]: 0x800DF216 0x004069AC
> > 0x00000004 0x00415300
> > [ 19.871983] ath10k_pci 0000:01:00.0: [32]: 0x800C383A 0x004069DC
> > 0x00415160 0x00400000
> > [ 19.879881] ath10k_pci 0000:01:00.0: [36]: 0x809800A3 0x00406A0C
> > 0x00415170 0x009C41F8
> > [ 19.887781] ath10k_pci 0000:01:00.0: [40]: 0x8098003A 0x00406A5C
> > 0x00400000 0x00400600
> > [ 19.895680] ath10k_pci 0000:01:00.0: [44]: 0x809607C1 0x00406A8C
> > 0xD8400100 0x00406A9C
> > [ 19.903579] ath10k_pci 0000:01:00.0: [48]: 0x80960892 0x00406AAC
> > 0x00000000 0x00000008
> > [ 19.911479] ath10k_pci 0000:01:00.0: [52]: 0x80960E39 0x00406ACC
> > 0x00400000 0x00400600
> > [ 19.919378] ath10k_pci 0000:01:00.0: [56]: 0x80960E9D 0x00406AEC
> > 0x00000000 0x00400600
> > [ 19.927277] ath10k_pci 0000:01:00.0: Copy Engine register dump:
> > [ 19.935181] ath10k_pci 0000:01:00.0: [00]: 0x0004a000 11 11 12 1=
1
> > [ 19.940994] ath10k_pci 0000:01:00.0: [01]: 0x0004a400 11 11 10 1=
1
> > [ 19.947590] ath10k_pci 0000:01:00.0: [02]: 0x0004a800 0 0 63 =
0
> > [ 19.954014] ath10k_pci 0000:01:00.0: [03]: 0x0004ac00 0 0 0 =
0
> > [ 19.960439] ath10k_pci 0000:01:00.0: [04]: 0x0004b000 0 0 0 =
0
> > [ 19.966862] ath10k_pci 0000:01:00.0: [05]: 0x0004b400 0 0 0 =
0
> > [ 19.973285] ath10k_pci 0000:01:00.0: [06]: 0x0004b800 0 0 0 =
0
> > [ 19.979709] ath10k_pci 0000:01:00.0: [07]: 0x0004bc00 1 1 1 =
1
> > [ 19.986132] ath10k_pci 0000:01:00.0: [08]: 0x0004c000 0 0 127 =
0
> > [ 19.992556] ath10k_pci 0000:01:00.0: [09]: 0x0004c400 1 1 1 =
1
> > [ 19.998980] ath10k_pci 0000:01:00.0: [10]: 0x0004c800 0 0 0 =
0
> > [ 20.005403] ath10k_pci 0000:01:00.0: [11]: 0x0004cc00 0 0 0 =
0
> > [ 20.795948] ath10k_pci 0000:01:00.0: failed to receive control
> > response completion, polling..
> > [ 21.835766] ath10k_pci 0000:01:00.0: ctl_resp never came in (-110)
> > [ 21.835810] ath10k_pci 0000:01:00.0: failed to connect to HTC: -110
> > [ 21.915174] ath10k_pci 0000:01:00.0: could not init core (-110)
> > [ 21.915620] ath10k_pci 0000:01:00.0: could not probe fw (-110)
> > [ 21.920266] ath10k_pci 0001:01:00.0: assign IRQ: got 100
> > [ 21.921197] ath10k_pci 0001:01:00.0: enabling device (0140 -> 0142)
> > [ 21.926032] ath10k_pci 0001:01:00.0: enabling bus mastering
> > [ 21.926715] ath10k_pci 0001:01:00.0: pci irq msi oper_irq_mode 2
> > irq_mode 0 reset_mode 0
> > [ 21.962217] ath10k_pci 0000:01:00.0: cannot restart a device that
> > hasn't been started
> > [ 22.104728] ath10k_pci 0001:01:00.0: Direct firmware load for
> > ath10k/pre-cal-pci-0001:01:00.0.bin failed with error -2
> > [ 22.104769] ath10k_pci 0001:01:00.0: Falling back to user helper
> > [ 22.424677] ath10k_pci 0001:01:00.0: Direct firmware load for
> > ath10k/QCA9984/hw1.0/firmware-6.bin failed with error -2
> > [ 22.424736] ath10k_pci 0001:01:00.0: Falling back to user helper
> > [ 22.462387] firmware ath10k!QCA9984!hw1.0!firmware-6.bin:
> > firmware_loading_store: map pages failed
> > [ 22.463844] ath10k_pci 0001:01:00.0: qca9984/qca9994 hw1.0 target
> > 0x01000000 chip_id 0x00000000 sub 168c:cafe
> > [ 22.470250] ath10k_pci 0001:01:00.0: kconfig debug 0 debugfs 1
> > tracing 0 dfs 1 testmode 1
> > [ 22.483627] ath10k_pci 0001:01:00.0: firmware ver 10.4-3.5.3-00053
> > api 5 features no-p2p,mfp,peer-flow-ctrl,btcoex-param,allows-mesh-bcast=
,no-ps
> > crc32 4c56a386
> > [ 23.743494] ath10k_pci 0001:01:00.0: board_file api 2 bmi_id 0:31
> > crc32 dd6d039c
> > [ 27.528777] ath10k_pci 0001:01:00.0: firmware crashed! (guid
> > 2112523e-3948-4925-b383-9e672937c6d5)
> > [ 27.528819] ath10k_pci 0001:01:00.0: qca9984/qca9994 hw1.0 target
> > 0x01000000 chip_id 0x00000000 sub 168c:cafe
> > [ 27.536696] ath10k_pci 0001:01:00.0: kconfig debug 0 debugfs 1
> > tracing 0 dfs 1 testmode 1
> > [ 27.548985] ath10k_pci 0001:01:00.0: firmware ver 10.4-3.5.3-00053
> > api 5 features no-p2p,mfp,peer-flow-ctrl,btcoex-param,allows-mesh-bcast=
,no-ps
> > crc32 4c56a386
> > [ 27.555303] ath10k_pci 0001:01:00.0: board_file api 2 bmi_id 0:31
> > crc32 dd6d039c
> > [ 27.568835] ath10k_pci 0001:01:00.0: htt-ver 0.0 wmi-op 6 htt-op 4
> > cal pre-cal-file max-sta 32 raw 0 hwcrypto 1
> > [ 27.578512] ath10k_pci 0001:01:00.0: firmware register dump:
> > [ 27.586281] ath10k_pci 0001:01:00.0: [00]: 0x01000000 0x000015B3
> > 0x009CBB38 0x00975B31
> > [ 27.592186] ath10k_pci 0001:01:00.0: [04]: 0x009CBB38 0x00060530
> > 0x00000011 0x00415760
> > [ 27.599910] ath10k_pci 0001:01:00.0: [08]: 0x00417E6C 0x00400000
> > 0x00000001 0x00422990
> > [ 27.607809] ath10k_pci 0001:01:00.0: [12]: 0x00000009 0xFFFFFFFF
> > 0x00973B25 0x00973B47
> > [ 27.615708] ath10k_pci 0001:01:00.0: [16]: 0x009CBB38 0x000CEEAC
> > 0x00000000 0x00000000
> > [ 27.623608] ath10k_pci 0001:01:00.0: [20]: 0x409CBB38 0x004068DC
> > 0x00000001 0x00403628
> > [ 27.631507] ath10k_pci 0001:01:00.0: [24]: 0x809814EF 0x0040693C
> > 0x00000049 0xC09CBB38
> > [ 27.639405] ath10k_pci 0001:01:00.0: [28]: 0x800DF216 0x004069AC
> > 0x00000004 0x00415300
> > [ 27.647305] ath10k_pci 0001:01:00.0: [32]: 0x800C383A 0x004069DC
> > 0x00415160 0x00400000
> > [ 27.655205] ath10k_pci 0001:01:00.0: [36]: 0x809800A3 0x00406A0C
> > 0x00415170 0x009C41F8
> > [ 27.663104] ath10k_pci 0001:01:00.0: [40]: 0x8098003A 0x00406A5C
> > 0x00400000 0x00400600
> > [ 27.671004] ath10k_pci 0001:01:00.0: [44]: 0x809607C1 0x00406A8C
> > 0xD8400100 0x00406A9C
> > [ 27.678902] ath10k_pci 0001:01:00.0: [48]: 0x80960892 0x00406AAC
> > 0x00000000 0x00000008
> > [ 27.686801] ath10k_pci 0001:01:00.0: [52]: 0x80960E39 0x00406ACC
> > 0x00400000 0x00400600
> > [ 27.694700] ath10k_pci 0001:01:00.0: [56]: 0x80960E9D 0x00406AEC
> > 0x00000000 0x00400600
> > [ 27.702603] ath10k_pci 0001:01:00.0: Copy Engine register dump:
> > [ 27.710506] ath10k_pci 0001:01:00.0: [00]: 0x0004a000 11 11 12 1=
1
> > [ 27.716322] ath10k_pci 0001:01:00.0: [01]: 0x0004a400 11 11 10 1=
1
> > [ 27.722917] ath10k_pci 0001:01:00.0: [02]: 0x0004a800 0 0 63 =
0
> > [ 27.729340] ath10k_pci 0001:01:00.0: [03]: 0x0004ac00 0 0 0 =
0
> > [ 27.735764] ath10k_pci 0001:01:00.0: [04]: 0x0004b000 0 0 0 =
0
> > [ 27.742188] ath10k_pci 0001:01:00.0: [05]: 0x0004b400 0 0 0 =
0
> > [ 27.748611] ath10k_pci 0001:01:00.0: [06]: 0x0004b800 0 0 0 =
0
> > [ 27.755035] ath10k_pci 0001:01:00.0: [07]: 0x0004bc00 1 1 1 =
1
> > [ 27.761459] ath10k_pci 0001:01:00.0: [08]: 0x0004c000 0 0 127 =
0
> > [ 27.767884] ath10k_pci 0001:01:00.0: [09]: 0x0004c400 1 1 1 =
1
> > [ 27.774304] ath10k_pci 0001:01:00.0: [10]: 0x0004c800 0 0 0 =
0
> > [ 27.780731] ath10k_pci 0001:01:00.0: [11]: 0x0004cc00 0 0 0 =
0
> > [ 28.567840] ath10k_pci 0001:01:00.0: failed to receive control
> > response completion, polling..
> > [ 29.616315] ath10k_pci 0001:01:00.0: ctl_resp never came in (-110)
> > [ 29.616341] ath10k_pci 0001:01:00.0: failed to connect to HTC: -110
> > [ 29.695567] ath10k_pci 0001:01:00.0: could not init core (-110)
> > [ 29.695988] ath10k_pci 0001:01:00.0: could not probe fw (-110)
> > [ 29.703824] kmodloader: done loading kernel modules from /etc/module=
s.d/*
> > [ 29.732245] ath10k_pci 0001:01:00.0: cannot restart a device that
> > hasn't been started
> >
> > Replacing stock firmware with latest from kvalo github (here :
> > https://github.com/kvalo/ath10k-firmware/tree/master/QCA9984/hw1.0/3.6.=
0.1)
> > I get the same result
> > Dmesg is :
> > [ 235.442819] ath10k_pci 0001:01:00.0: disabling bus mastering
> > [ 235.482588] ath10k_pci 0000:01:00.0: disabling bus mastering
> > [ 260.586372] ath10k_pci 0000:01:00.0: assign IRQ: got 67
> > [ 260.586771] ath10k_pci 0000:01:00.0: enabling bus mastering
> > [ 260.587218] ath10k_pci 0000:01:00.0: pci irq msi oper_irq_mode 2
> > irq_mode 0 reset_mode 0
> > [ 260.754869] ath10k_pci 0000:01:00.0: Direct firmware load for
> > ath10k/QCA9984/hw1.0/firmware-6.bin failed with error -2
> > [ 260.754917] ath10k_pci 0000:01:00.0: Falling back to user helper
> > [ 260.786271] firmware ath10k!QCA9984!hw1.0!firmware-6.bin:
> > firmware_loading_store: map pages failed
> > [ 260.787219] ath10k_pci 0000:01:00.0: qca9984/qca9994 hw1.0 target
> > 0x01000000 chip_id 0x00000000 sub 168c:cafe
> > [ 260.794202] ath10k_pci 0000:01:00.0: kconfig debug 0 debugfs 1
> > tracing 0 dfs 1 testmode 1
> > [ 260.806246] ath10k_pci 0000:01:00.0: firmware ver
> > 10.4-3.6.0.1-00003 api 5 features
> > no-p2p,mfp,peer-flow-ctrl,btcoex-param,allows-mesh-bcast,no-ps crc32
> > 266d70b0
> > [ 262.065148] ath10k_pci 0000:01:00.0: board_file api 2 bmi_id 0:31
> > crc32 dd6d039c
> > [ 265.858256] ath10k_pci 0000:01:00.0: firmware crashed! (guid
> > 2b6addfc-915e-437a-a7fa-3691cbf4b39e)
> > [ 265.858347] ath10k_pci 0000:01:00.0: qca9984/qca9994 hw1.0 target
> > 0x01000000 chip_id 0x00000000 sub 168c:cafe
> > [ 265.866136] ath10k_pci 0000:01:00.0: kconfig debug 0 debugfs 1
> > tracing 0 dfs 1 testmode 1
> > [ 265.881167] ath10k_pci 0000:01:00.0: firmware ver
> > 10.4-3.6.0.1-00003 api 5 features
> > no-p2p,mfp,peer-flow-ctrl,btcoex-param,allows-mesh-bcast,no-ps crc32
> > 266d70b0
> > [ 265.885460] ath10k_pci 0000:01:00.0: board_file api 2 bmi_id 0:31
> > crc32 dd6d039c
> > [ 265.898696] ath10k_pci 0000:01:00.0: htt-ver 0.0 wmi-op 6 htt-op 4
> > cal pre-cal-file max-sta 32 raw 0 hwcrypto 1
> > [ 265.908193] ath10k_pci 0000:01:00.0: firmware register dump:
> > [ 265.915961] ath10k_pci 0000:01:00.0: [00]: 0x01000000 0x000015B3
> > 0x009CC074 0x00975B31
> > [ 265.921864] ath10k_pci 0000:01:00.0: [04]: 0x009CC074 0x00060530
> > 0x00000011 0x004142FC
> > [ 265.929590] ath10k_pci 0000:01:00.0: [08]: 0x00416AFC 0x00400000
> > 0x00000001 0x00421F90
> > [ 265.937488] ath10k_pci 0000:01:00.0: [12]: 0x00000009 0xFFFFFFFF
> > 0x00973B25 0x00973B47
> > [ 265.945389] ath10k_pci 0000:01:00.0: [16]: 0x009CC074 0x000CFE13
> > 0x00000000 0x00000000
> > [ 265.953289] ath10k_pci 0000:01:00.0: [20]: 0x409CC074 0x004068DC
> > 0x00000001 0x00403628
> > [ 265.961187] ath10k_pci 0000:01:00.0: [24]: 0x8098153B 0x0040693C
> > 0x0000004E 0xC09CC074
> > [ 265.969087] ath10k_pci 0000:01:00.0: [28]: 0x800E026F 0x004069AC
> > 0x00000004 0x00413E60
> > [ 265.976984] ath10k_pci 0000:01:00.0: [32]: 0x800C383A 0x004069DC
> > 0x00413CB0 0x00400000
> > [ 265.984884] ath10k_pci 0000:01:00.0: [36]: 0x809800A3 0x00406A0C
> > 0x00413CC0 0x009C4750
> > [ 265.992784] ath10k_pci 0000:01:00.0: [40]: 0x8098003A 0x00406A5C
> > 0x00400000 0x00400600
> > [ 266.000684] ath10k_pci 0000:01:00.0: [44]: 0x809607C1 0x00406A8C
> > 0xD8400100 0x00406A9C
> > [ 266.008582] ath10k_pci 0000:01:00.0: [48]: 0x80960892 0x00406AAC
> > 0x00000000 0x00000008
> > [ 266.016482] ath10k_pci 0000:01:00.0: [52]: 0x80960E39 0x00406ACC
> > 0x00400000 0x00400600
> > [ 266.024381] ath10k_pci 0000:01:00.0: [56]: 0x80960E9D 0x00406AEC
> > 0x00000000 0x00400600
> > [ 266.032279] ath10k_pci 0000:01:00.0: Copy Engine register dump:
> > [ 266.040186] ath10k_pci 0000:01:00.0: [00]: 0x0004a000 12 12 29 2=
8
> > [ 266.045999] ath10k_pci 0000:01:00.0: [01]: 0x0004a400 11 11 10 1=
1
> > [ 266.052595] ath10k_pci 0000:01:00.0: [02]: 0x0004a800 0 0 63 =
0
> > [ 266.059018] ath10k_pci 0000:01:00.0: [03]: 0x0004ac00 0 0 0 =
0
> > [ 266.065441] ath10k_pci 0000:01:00.0: [04]: 0x0004b000 0 0 0 =
0
> > [ 266.071865] ath10k_pci 0000:01:00.0: [05]: 0x0004b400 0 0 0 =
0
> > [ 266.078289] ath10k_pci 0000:01:00.0: [06]: 0x0004b800 0 0 0 =
0
> > [ 266.084713] ath10k_pci 0000:01:00.0: [07]: 0x0004bc00 1 1 1 =
1
> > [ 266.091136] ath10k_pci 0000:01:00.0: [08]: 0x0004c000 0 0 127 =
0
> > [ 266.097559] ath10k_pci 0000:01:00.0: [09]: 0x0004c400 1 1 1 =
1
> > [ 266.103982] ath10k_pci 0000:01:00.0: [10]: 0x0004c800 0 0 0 =
0
> > [ 266.110408] ath10k_pci 0000:01:00.0: [11]: 0x0004cc00 0 0 0 =
0
> > [ 266.876609] ath10k_pci 0000:01:00.0: failed to receive control
> > response completion, polling..
> > [ 267.915918] ath10k_pci 0000:01:00.0: ctl_resp never came in (-110)
> > [ 267.915970] ath10k_pci 0000:01:00.0: failed to connect to HTC: -110
> > [ 267.996406] ath10k_pci 0000:01:00.0: could not init core (-110)
> > [ 267.996972] ath10k_pci 0000:01:00.0: could not probe fw (-110)
> > [ 268.001578] ath10k_pci 0001:01:00.0: assign IRQ: got 100
> > [ 268.002612] ath10k_pci 0001:01:00.0: enabling bus mastering
> > [ 268.003292] ath10k_pci 0001:01:00.0: pci irq msi oper_irq_mode 2
> > irq_mode 0 reset_mode 0
> > [ 268.032241] ath10k_pci 0000:01:00.0: cannot restart a device that
> > hasn't been started
> > [ 268.174893] ath10k_pci 0001:01:00.0: Direct firmware load for
> > ath10k/QCA9984/hw1.0/firmware-6.bin failed with error -2
> > [ 268.174936] ath10k_pci 0001:01:00.0: Falling back to user helper
> > [ 268.206575] firmware ath10k!QCA9984!hw1.0!firmware-6.bin:
> > firmware_loading_store: map pages failed
> > [ 268.207955] ath10k_pci 0001:01:00.0: qca9984/qca9994 hw1.0 target
> > 0x01000000 chip_id 0x00000000 sub 168c:cafe
> > [ 268.214521] ath10k_pci 0001:01:00.0: kconfig debug 0 debugfs 1
> > tracing 0 dfs 1 testmode 1
> > [ 268.227852] ath10k_pci 0001:01:00.0: firmware ver
> > 10.4-3.6.0.1-00003 api 5 features
> > no-p2p,mfp,peer-flow-ctrl,btcoex-param,allows-mesh-bcast,no-ps crc32
> > 266d70b0
> > [ 269.485480] ath10k_pci 0001:01:00.0: board_file api 2 bmi_id 0:31
> > crc32 dd6d039c
> > [ 273.282901] ath10k_pci 0001:01:00.0: firmware crashed! (guid
> > 28f0a68b-f881-40cb-b515-f4320b412b7a)
> > [ 273.282982] ath10k_pci 0001:01:00.0: qca9984/qca9994 hw1.0 target
> > 0x01000000 chip_id 0x00000000 sub 168c:cafe
> > [ 273.290780] ath10k_pci 0001:01:00.0: kconfig debug 0 debugfs 1
> > tracing 0 dfs 1 testmode 1
> > [ 273.306323] ath10k_pci 0001:01:00.0: firmware ver
> > 10.4-3.6.0.1-00003 api 5 features
> > no-p2p,mfp,peer-flow-ctrl,btcoex-param,allows-mesh-bcast,no-ps crc32
> > 266d70b0
> > [ 273.310039] ath10k_pci 0001:01:00.0: board_file api 2 bmi_id 0:31
> > crc32 dd6d039c
> > [ 273.323420] ath10k_pci 0001:01:00.0: htt-ver 0.0 wmi-op 6 htt-op 4
> > cal pre-cal-file max-sta 32 raw 0 hwcrypto 1
> > [ 273.332841] ath10k_pci 0001:01:00.0: firmware register dump:
> > [ 273.340604] ath10k_pci 0001:01:00.0: [00]: 0x01000000 0x000015B3
> > 0x009CC074 0x00975B31
> > [ 273.346508] ath10k_pci 0001:01:00.0: [04]: 0x009CC074 0x00060530
> > 0x00000011 0x004142FC
> > [ 273.354234] ath10k_pci 0001:01:00.0: [08]: 0x00416AFC 0x00400000
> > 0x00000001 0x00421F90
> > [ 273.362135] ath10k_pci 0001:01:00.0: [12]: 0x00000009 0xFFFFFFFF
> > 0x00973B25 0x00973B47
> > [ 273.370033] ath10k_pci 0001:01:00.0: [16]: 0x009CC074 0x000CFE13
> > 0x00000000 0x00000000
> > [ 273.377932] ath10k_pci 0001:01:00.0: [20]: 0x409CC074 0x004068DC
> > 0x00000001 0x00403628
> > [ 273.385833] ath10k_pci 0001:01:00.0: [24]: 0x8098153B 0x0040693C
> > 0x0000004E 0xC09CC074
> > [ 273.393732] ath10k_pci 0001:01:00.0: [28]: 0x800E026F 0x004069AC
> > 0x00000004 0x00413E60
> > [ 273.401631] ath10k_pci 0001:01:00.0: [32]: 0x800C383A 0x004069DC
> > 0x00413CB0 0x00400000
> > [ 273.409529] ath10k_pci 0001:01:00.0: [36]: 0x809800A3 0x00406A0C
> > 0x00413CC0 0x009C4750
> > [ 273.417429] ath10k_pci 0001:01:00.0: [40]: 0x8098003A 0x00406A5C
> > 0x00400000 0x00400600
> > [ 273.425329] ath10k_pci 0001:01:00.0: [44]: 0x809607C1 0x00406A8C
> > 0xD8400100 0x00406A9C
> > [ 273.433227] ath10k_pci 0001:01:00.0: [48]: 0x80960892 0x00406AAC
> > 0x00000000 0x00000008
> > [ 273.441127] ath10k_pci 0001:01:00.0: [52]: 0x80960E39 0x00406ACC
> > 0x00400000 0x00400600
> > [ 273.449027] ath10k_pci 0001:01:00.0: [56]: 0x80960E9D 0x00406AEC
> > 0x00000000 0x00400600
> > [ 273.456924] ath10k_pci 0001:01:00.0: Copy Engine register dump:
> > [ 273.464831] ath10k_pci 0001:01:00.0: [00]: 0x0004a000 12 12 29 2=
8
> > [ 273.470647] ath10k_pci 0001:01:00.0: [01]: 0x0004a400 11 11 10 1=
1
> > [ 273.477243] ath10k_pci 0001:01:00.0: [02]: 0x0004a800 0 0 63 =
0
> > [ 273.483664] ath10k_pci 0001:01:00.0: [03]: 0x0004ac00 0 0 0 =
0
> > [ 273.490088] ath10k_pci 0001:01:00.0: [04]: 0x0004b000 0 0 0 =
0
> > [ 273.496512] ath10k_pci 0001:01:00.0: [05]: 0x0004b400 0 0 0 =
0
> > [ 273.502936] ath10k_pci 0001:01:00.0: [06]: 0x0004b800 0 0 0 =
0
> > [ 273.509360] ath10k_pci 0001:01:00.0: [07]: 0x0004bc00 1 1 1 =
1
> > [ 273.515783] ath10k_pci 0001:01:00.0: [08]: 0x0004c000 0 0 127 =
0
> > [ 273.522208] ath10k_pci 0001:01:00.0: [09]: 0x0004c400 1 1 1 =
1
> > [ 273.528632] ath10k_pci 0001:01:00.0: [10]: 0x0004c800 0 0 0 =
0
> > [ 273.535054] ath10k_pci 0001:01:00.0: [11]: 0x0004cc00 0 0 0 =
0
> > [ 274.326491] ath10k_pci 0001:01:00.0: failed to receive control
> > response completion, polling..
> > [ 275.356625] ath10k_pci 0001:01:00.0: ctl_resp never came in (-110)
> > [ 275.356672] ath10k_pci 0001:01:00.0: failed to connect to HTC: -110
> > [ 275.436389] ath10k_pci 0001:01:00.0: could not init core (-110)
> > [ 275.436925] ath10k_pci 0001:01:00.0: could not probe fw (-110)
> > [ 275.472295] ath10k_pci 0001:01:00.0: cannot restart a device that
> > hasn't been started
> >
> > Various tests with others firmware from candelatech , stock LEDE 17.01
> > or dd-wrt give me firmware crash also
> >
> > I already tried to enable debug info for firmware crash with 'rmmod
> > ath10k_pci; rmmod ath10k_core; modprobe ath10k_core
> > debug_mask=3D0xffffffff ; modprobe ath10k_pci ' but without success
> >
> > Flashing back netgear factory firmware is OK, and all is functionnal
> >
> > What can I do next ?
> >
> > Thanks all
> >
since i'm mainly the dd-wrt developer and you tested it as well with the
same reproduceable crash it would be nice if you could provide me a
nvram backup with a reproduceable crash (you should change passwords of
course) to my private email. so i can apply it to my device and to see
whats happen. if you have a beta device i just can guess that the
calibration data which is stored in flash memory has maybe a different
location, so openwrt as well as dd-wrt uses crap to initialize the
hardware. this is just a guess. but i have 2 r7800 factory models. you
can also send me a full flash backup of your device using wetransfer, so
i can compare the content with my device and check if there is a flash
layout specific different. this would help to track down the problem
cause and maybe find a specific workaround for such devices by detecting
them well
Sebastian
Am 20.09.2018 um 09:44 schrieb Bruno Rosset:
> HI Sebastian,
>
> I just flash the r7800 with the openwrt 18.06.1 factory image (here :
> https://downloads.openwrt.org/releases/18.06.1/targets/ipq806x/generic/openwrt-18.06.1-ipq806x-netgear_r7800-squashfs-factory.img)
>
> I forgot to mention that I get a beta hardware of the R7800, perhaps
> there is something different in my hardware compared to the released
> one.
>
> Regards,
> Bruno
> Le jeu. 20 sept. 2018 à 08:36, Sebastian Gottschall
> <[email protected]> a écrit :
>> can you tell me how to reproduce this crash? i have 2 r7800 running with
>> dd-wrt but no crashes
>>
>> Am 19.09.2018 um 22:37 schrieb Bruno Rosset:
>>> Hi all,
>>>
>>> I get a firmware crash using latest openwrt 18.06.1 on the Netgear
>>> R7800 with stock firmware
>>> Dmesg is :
>>> [ 13.804366] ath10k_pci 0000:01:00.0: assign IRQ: got 67
>>> [ 13.804805] ath10k_pci 0000:01:00.0: enabling device (0140 -> 0142)
>>> [ 13.804887] ath10k_pci 0000:01:00.0: enabling bus mastering
>>> [ 13.805346] ath10k_pci 0000:01:00.0: pci irq msi oper_irq_mode 2
>>> irq_mode 0 reset_mode 0
>>> [ 13.974787] ath10k_pci 0000:01:00.0: Direct firmware load for
>>> ath10k/pre-cal-pci-0000:01:00.0.bin failed with error -2
>>> [ 13.974827] ath10k_pci 0000:01:00.0: Falling back to user helper
>>> [ 14.304794] ath10k_pci 0000:01:00.0: Direct firmware load for
>>> ath10k/QCA9984/hw1.0/firmware-6.bin failed with error -2
>>> [ 14.304857] ath10k_pci 0000:01:00.0: Falling back to user helper
>>> [ 14.337111] firmware ath10k!QCA9984!hw1.0!firmware-6.bin:
>>> firmware_loading_store: map pages failed
>>> [ 14.702947] ath10k_pci 0000:01:00.0: qca9984/qca9994 hw1.0 target
>>> 0x01000000 chip_id 0x00000000 sub 168c:cafe
>>> [ 14.702997] ath10k_pci 0000:01:00.0: kconfig debug 0 debugfs 1
>>> tracing 0 dfs 1 testmode 1
>>> [ 14.716459] ath10k_pci 0000:01:00.0: firmware ver 10.4-3.5.3-00053
>>> api 5 features no-p2p,mfp,peer-flow-ctrl,btcoex-param,allows-mesh-bcast,no-ps
>>> crc32 4c56a386
>>> [ 15.973104] ath10k_pci 0000:01:00.0: board_file api 2 bmi_id 0:31
>>> crc32 dd6d039c
>>> [ 19.753460] ath10k_pci 0000:01:00.0: firmware crashed! (guid
>>> ca7089d2-df9a-4f9d-8fa6-d1b908cf3220)
>>> [ 19.753494] ath10k_pci 0000:01:00.0: qca9984/qca9994 hw1.0 target
>>> 0x01000000 chip_id 0x00000000 sub 168c:cafe
>>> [ 19.761307] ath10k_pci 0000:01:00.0: kconfig debug 0 debugfs 1
>>> tracing 0 dfs 1 testmode 1
>>> [ 19.773202] ath10k_pci 0000:01:00.0: firmware ver 10.4-3.5.3-00053
>>> api 5 features no-p2p,mfp,peer-flow-ctrl,btcoex-param,allows-mesh-bcast,no-ps
>>> crc32 4c56a386
>>> [ 19.779887] ath10k_pci 0000:01:00.0: board_file api 2 bmi_id 0:31
>>> crc32 dd6d039c
>>> [ 19.793511] ath10k_pci 0000:01:00.0: htt-ver 0.0 wmi-op 6 htt-op 4
>>> cal pre-cal-file max-sta 32 raw 0 hwcrypto 1
>>> [ 19.803176] ath10k_pci 0000:01:00.0: firmware register dump:
>>> [ 19.810956] ath10k_pci 0000:01:00.0: [00]: 0x01000000 0x000015B3
>>> 0x009CBB38 0x00975B31
>>> [ 19.816861] ath10k_pci 0000:01:00.0: [04]: 0x009CBB38 0x00060530
>>> 0x00000011 0x00415760
>>> [ 19.824587] ath10k_pci 0000:01:00.0: [08]: 0x00417E6C 0x00400000
>>> 0x00000001 0x00422990
>>> [ 19.832485] ath10k_pci 0000:01:00.0: [12]: 0x00000009 0xFFFFFFFF
>>> 0x00973B25 0x00973B47
>>> [ 19.840384] ath10k_pci 0000:01:00.0: [16]: 0x009CBB38 0x000CEEA7
>>> 0x00000000 0x00000000
>>> [ 19.848284] ath10k_pci 0000:01:00.0: [20]: 0x409CBB38 0x004068DC
>>> 0x00000001 0x00403628
>>> [ 19.856183] ath10k_pci 0000:01:00.0: [24]: 0x809814EF 0x0040693C
>>> 0x00000049 0xC09CBB38
>>> [ 19.864083] ath10k_pci 0000:01:00.0: [28]: 0x800DF216 0x004069AC
>>> 0x00000004 0x00415300
>>> [ 19.871983] ath10k_pci 0000:01:00.0: [32]: 0x800C383A 0x004069DC
>>> 0x00415160 0x00400000
>>> [ 19.879881] ath10k_pci 0000:01:00.0: [36]: 0x809800A3 0x00406A0C
>>> 0x00415170 0x009C41F8
>>> [ 19.887781] ath10k_pci 0000:01:00.0: [40]: 0x8098003A 0x00406A5C
>>> 0x00400000 0x00400600
>>> [ 19.895680] ath10k_pci 0000:01:00.0: [44]: 0x809607C1 0x00406A8C
>>> 0xD8400100 0x00406A9C
>>> [ 19.903579] ath10k_pci 0000:01:00.0: [48]: 0x80960892 0x00406AAC
>>> 0x00000000 0x00000008
>>> [ 19.911479] ath10k_pci 0000:01:00.0: [52]: 0x80960E39 0x00406ACC
>>> 0x00400000 0x00400600
>>> [ 19.919378] ath10k_pci 0000:01:00.0: [56]: 0x80960E9D 0x00406AEC
>>> 0x00000000 0x00400600
>>> [ 19.927277] ath10k_pci 0000:01:00.0: Copy Engine register dump:
>>> [ 19.935181] ath10k_pci 0000:01:00.0: [00]: 0x0004a000 11 11 12 11
>>> [ 19.940994] ath10k_pci 0000:01:00.0: [01]: 0x0004a400 11 11 10 11
>>> [ 19.947590] ath10k_pci 0000:01:00.0: [02]: 0x0004a800 0 0 63 0
>>> [ 19.954014] ath10k_pci 0000:01:00.0: [03]: 0x0004ac00 0 0 0 0
>>> [ 19.960439] ath10k_pci 0000:01:00.0: [04]: 0x0004b000 0 0 0 0
>>> [ 19.966862] ath10k_pci 0000:01:00.0: [05]: 0x0004b400 0 0 0 0
>>> [ 19.973285] ath10k_pci 0000:01:00.0: [06]: 0x0004b800 0 0 0 0
>>> [ 19.979709] ath10k_pci 0000:01:00.0: [07]: 0x0004bc00 1 1 1 1
>>> [ 19.986132] ath10k_pci 0000:01:00.0: [08]: 0x0004c000 0 0 127 0
>>> [ 19.992556] ath10k_pci 0000:01:00.0: [09]: 0x0004c400 1 1 1 1
>>> [ 19.998980] ath10k_pci 0000:01:00.0: [10]: 0x0004c800 0 0 0 0
>>> [ 20.005403] ath10k_pci 0000:01:00.0: [11]: 0x0004cc00 0 0 0 0
>>> [ 20.795948] ath10k_pci 0000:01:00.0: failed to receive control
>>> response completion, polling..
>>> [ 21.835766] ath10k_pci 0000:01:00.0: ctl_resp never came in (-110)
>>> [ 21.835810] ath10k_pci 0000:01:00.0: failed to connect to HTC: -110
>>> [ 21.915174] ath10k_pci 0000:01:00.0: could not init core (-110)
>>> [ 21.915620] ath10k_pci 0000:01:00.0: could not probe fw (-110)
>>> [ 21.920266] ath10k_pci 0001:01:00.0: assign IRQ: got 100
>>> [ 21.921197] ath10k_pci 0001:01:00.0: enabling device (0140 -> 0142)
>>> [ 21.926032] ath10k_pci 0001:01:00.0: enabling bus mastering
>>> [ 21.926715] ath10k_pci 0001:01:00.0: pci irq msi oper_irq_mode 2
>>> irq_mode 0 reset_mode 0
>>> [ 21.962217] ath10k_pci 0000:01:00.0: cannot restart a device that
>>> hasn't been started
>>> [ 22.104728] ath10k_pci 0001:01:00.0: Direct firmware load for
>>> ath10k/pre-cal-pci-0001:01:00.0.bin failed with error -2
>>> [ 22.104769] ath10k_pci 0001:01:00.0: Falling back to user helper
>>> [ 22.424677] ath10k_pci 0001:01:00.0: Direct firmware load for
>>> ath10k/QCA9984/hw1.0/firmware-6.bin failed with error -2
>>> [ 22.424736] ath10k_pci 0001:01:00.0: Falling back to user helper
>>> [ 22.462387] firmware ath10k!QCA9984!hw1.0!firmware-6.bin:
>>> firmware_loading_store: map pages failed
>>> [ 22.463844] ath10k_pci 0001:01:00.0: qca9984/qca9994 hw1.0 target
>>> 0x01000000 chip_id 0x00000000 sub 168c:cafe
>>> [ 22.470250] ath10k_pci 0001:01:00.0: kconfig debug 0 debugfs 1
>>> tracing 0 dfs 1 testmode 1
>>> [ 22.483627] ath10k_pci 0001:01:00.0: firmware ver 10.4-3.5.3-00053
>>> api 5 features no-p2p,mfp,peer-flow-ctrl,btcoex-param,allows-mesh-bcast,no-ps
>>> crc32 4c56a386
>>> [ 23.743494] ath10k_pci 0001:01:00.0: board_file api 2 bmi_id 0:31
>>> crc32 dd6d039c
>>> [ 27.528777] ath10k_pci 0001:01:00.0: firmware crashed! (guid
>>> 2112523e-3948-4925-b383-9e672937c6d5)
>>> [ 27.528819] ath10k_pci 0001:01:00.0: qca9984/qca9994 hw1.0 target
>>> 0x01000000 chip_id 0x00000000 sub 168c:cafe
>>> [ 27.536696] ath10k_pci 0001:01:00.0: kconfig debug 0 debugfs 1
>>> tracing 0 dfs 1 testmode 1
>>> [ 27.548985] ath10k_pci 0001:01:00.0: firmware ver 10.4-3.5.3-00053
>>> api 5 features no-p2p,mfp,peer-flow-ctrl,btcoex-param,allows-mesh-bcast,no-ps
>>> crc32 4c56a386
>>> [ 27.555303] ath10k_pci 0001:01:00.0: board_file api 2 bmi_id 0:31
>>> crc32 dd6d039c
>>> [ 27.568835] ath10k_pci 0001:01:00.0: htt-ver 0.0 wmi-op 6 htt-op 4
>>> cal pre-cal-file max-sta 32 raw 0 hwcrypto 1
>>> [ 27.578512] ath10k_pci 0001:01:00.0: firmware register dump:
>>> [ 27.586281] ath10k_pci 0001:01:00.0: [00]: 0x01000000 0x000015B3
>>> 0x009CBB38 0x00975B31
>>> [ 27.592186] ath10k_pci 0001:01:00.0: [04]: 0x009CBB38 0x00060530
>>> 0x00000011 0x00415760
>>> [ 27.599910] ath10k_pci 0001:01:00.0: [08]: 0x00417E6C 0x00400000
>>> 0x00000001 0x00422990
>>> [ 27.607809] ath10k_pci 0001:01:00.0: [12]: 0x00000009 0xFFFFFFFF
>>> 0x00973B25 0x00973B47
>>> [ 27.615708] ath10k_pci 0001:01:00.0: [16]: 0x009CBB38 0x000CEEAC
>>> 0x00000000 0x00000000
>>> [ 27.623608] ath10k_pci 0001:01:00.0: [20]: 0x409CBB38 0x004068DC
>>> 0x00000001 0x00403628
>>> [ 27.631507] ath10k_pci 0001:01:00.0: [24]: 0x809814EF 0x0040693C
>>> 0x00000049 0xC09CBB38
>>> [ 27.639405] ath10k_pci 0001:01:00.0: [28]: 0x800DF216 0x004069AC
>>> 0x00000004 0x00415300
>>> [ 27.647305] ath10k_pci 0001:01:00.0: [32]: 0x800C383A 0x004069DC
>>> 0x00415160 0x00400000
>>> [ 27.655205] ath10k_pci 0001:01:00.0: [36]: 0x809800A3 0x00406A0C
>>> 0x00415170 0x009C41F8
>>> [ 27.663104] ath10k_pci 0001:01:00.0: [40]: 0x8098003A 0x00406A5C
>>> 0x00400000 0x00400600
>>> [ 27.671004] ath10k_pci 0001:01:00.0: [44]: 0x809607C1 0x00406A8C
>>> 0xD8400100 0x00406A9C
>>> [ 27.678902] ath10k_pci 0001:01:00.0: [48]: 0x80960892 0x00406AAC
>>> 0x00000000 0x00000008
>>> [ 27.686801] ath10k_pci 0001:01:00.0: [52]: 0x80960E39 0x00406ACC
>>> 0x00400000 0x00400600
>>> [ 27.694700] ath10k_pci 0001:01:00.0: [56]: 0x80960E9D 0x00406AEC
>>> 0x00000000 0x00400600
>>> [ 27.702603] ath10k_pci 0001:01:00.0: Copy Engine register dump:
>>> [ 27.710506] ath10k_pci 0001:01:00.0: [00]: 0x0004a000 11 11 12 11
>>> [ 27.716322] ath10k_pci 0001:01:00.0: [01]: 0x0004a400 11 11 10 11
>>> [ 27.722917] ath10k_pci 0001:01:00.0: [02]: 0x0004a800 0 0 63 0
>>> [ 27.729340] ath10k_pci 0001:01:00.0: [03]: 0x0004ac00 0 0 0 0
>>> [ 27.735764] ath10k_pci 0001:01:00.0: [04]: 0x0004b000 0 0 0 0
>>> [ 27.742188] ath10k_pci 0001:01:00.0: [05]: 0x0004b400 0 0 0 0
>>> [ 27.748611] ath10k_pci 0001:01:00.0: [06]: 0x0004b800 0 0 0 0
>>> [ 27.755035] ath10k_pci 0001:01:00.0: [07]: 0x0004bc00 1 1 1 1
>>> [ 27.761459] ath10k_pci 0001:01:00.0: [08]: 0x0004c000 0 0 127 0
>>> [ 27.767884] ath10k_pci 0001:01:00.0: [09]: 0x0004c400 1 1 1 1
>>> [ 27.774304] ath10k_pci 0001:01:00.0: [10]: 0x0004c800 0 0 0 0
>>> [ 27.780731] ath10k_pci 0001:01:00.0: [11]: 0x0004cc00 0 0 0 0
>>> [ 28.567840] ath10k_pci 0001:01:00.0: failed to receive control
>>> response completion, polling..
>>> [ 29.616315] ath10k_pci 0001:01:00.0: ctl_resp never came in (-110)
>>> [ 29.616341] ath10k_pci 0001:01:00.0: failed to connect to HTC: -110
>>> [ 29.695567] ath10k_pci 0001:01:00.0: could not init core (-110)
>>> [ 29.695988] ath10k_pci 0001:01:00.0: could not probe fw (-110)
>>> [ 29.703824] kmodloader: done loading kernel modules from /etc/modules.d/*
>>> [ 29.732245] ath10k_pci 0001:01:00.0: cannot restart a device that
>>> hasn't been started
>>>
>>> Replacing stock firmware with latest from kvalo github (here :
>>> https://github.com/kvalo/ath10k-firmware/tree/master/QCA9984/hw1.0/3.6.0.1)
>>> I get the same result
>>> Dmesg is :
>>> [ 235.442819] ath10k_pci 0001:01:00.0: disabling bus mastering
>>> [ 235.482588] ath10k_pci 0000:01:00.0: disabling bus mastering
>>> [ 260.586372] ath10k_pci 0000:01:00.0: assign IRQ: got 67
>>> [ 260.586771] ath10k_pci 0000:01:00.0: enabling bus mastering
>>> [ 260.587218] ath10k_pci 0000:01:00.0: pci irq msi oper_irq_mode 2
>>> irq_mode 0 reset_mode 0
>>> [ 260.754869] ath10k_pci 0000:01:00.0: Direct firmware load for
>>> ath10k/QCA9984/hw1.0/firmware-6.bin failed with error -2
>>> [ 260.754917] ath10k_pci 0000:01:00.0: Falling back to user helper
>>> [ 260.786271] firmware ath10k!QCA9984!hw1.0!firmware-6.bin:
>>> firmware_loading_store: map pages failed
>>> [ 260.787219] ath10k_pci 0000:01:00.0: qca9984/qca9994 hw1.0 target
>>> 0x01000000 chip_id 0x00000000 sub 168c:cafe
>>> [ 260.794202] ath10k_pci 0000:01:00.0: kconfig debug 0 debugfs 1
>>> tracing 0 dfs 1 testmode 1
>>> [ 260.806246] ath10k_pci 0000:01:00.0: firmware ver
>>> 10.4-3.6.0.1-00003 api 5 features
>>> no-p2p,mfp,peer-flow-ctrl,btcoex-param,allows-mesh-bcast,no-ps crc32
>>> 266d70b0
>>> [ 262.065148] ath10k_pci 0000:01:00.0: board_file api 2 bmi_id 0:31
>>> crc32 dd6d039c
>>> [ 265.858256] ath10k_pci 0000:01:00.0: firmware crashed! (guid
>>> 2b6addfc-915e-437a-a7fa-3691cbf4b39e)
>>> [ 265.858347] ath10k_pci 0000:01:00.0: qca9984/qca9994 hw1.0 target
>>> 0x01000000 chip_id 0x00000000 sub 168c:cafe
>>> [ 265.866136] ath10k_pci 0000:01:00.0: kconfig debug 0 debugfs 1
>>> tracing 0 dfs 1 testmode 1
>>> [ 265.881167] ath10k_pci 0000:01:00.0: firmware ver
>>> 10.4-3.6.0.1-00003 api 5 features
>>> no-p2p,mfp,peer-flow-ctrl,btcoex-param,allows-mesh-bcast,no-ps crc32
>>> 266d70b0
>>> [ 265.885460] ath10k_pci 0000:01:00.0: board_file api 2 bmi_id 0:31
>>> crc32 dd6d039c
>>> [ 265.898696] ath10k_pci 0000:01:00.0: htt-ver 0.0 wmi-op 6 htt-op 4
>>> cal pre-cal-file max-sta 32 raw 0 hwcrypto 1
>>> [ 265.908193] ath10k_pci 0000:01:00.0: firmware register dump:
>>> [ 265.915961] ath10k_pci 0000:01:00.0: [00]: 0x01000000 0x000015B3
>>> 0x009CC074 0x00975B31
>>> [ 265.921864] ath10k_pci 0000:01:00.0: [04]: 0x009CC074 0x00060530
>>> 0x00000011 0x004142FC
>>> [ 265.929590] ath10k_pci 0000:01:00.0: [08]: 0x00416AFC 0x00400000
>>> 0x00000001 0x00421F90
>>> [ 265.937488] ath10k_pci 0000:01:00.0: [12]: 0x00000009 0xFFFFFFFF
>>> 0x00973B25 0x00973B47
>>> [ 265.945389] ath10k_pci 0000:01:00.0: [16]: 0x009CC074 0x000CFE13
>>> 0x00000000 0x00000000
>>> [ 265.953289] ath10k_pci 0000:01:00.0: [20]: 0x409CC074 0x004068DC
>>> 0x00000001 0x00403628
>>> [ 265.961187] ath10k_pci 0000:01:00.0: [24]: 0x8098153B 0x0040693C
>>> 0x0000004E 0xC09CC074
>>> [ 265.969087] ath10k_pci 0000:01:00.0: [28]: 0x800E026F 0x004069AC
>>> 0x00000004 0x00413E60
>>> [ 265.976984] ath10k_pci 0000:01:00.0: [32]: 0x800C383A 0x004069DC
>>> 0x00413CB0 0x00400000
>>> [ 265.984884] ath10k_pci 0000:01:00.0: [36]: 0x809800A3 0x00406A0C
>>> 0x00413CC0 0x009C4750
>>> [ 265.992784] ath10k_pci 0000:01:00.0: [40]: 0x8098003A 0x00406A5C
>>> 0x00400000 0x00400600
>>> [ 266.000684] ath10k_pci 0000:01:00.0: [44]: 0x809607C1 0x00406A8C
>>> 0xD8400100 0x00406A9C
>>> [ 266.008582] ath10k_pci 0000:01:00.0: [48]: 0x80960892 0x00406AAC
>>> 0x00000000 0x00000008
>>> [ 266.016482] ath10k_pci 0000:01:00.0: [52]: 0x80960E39 0x00406ACC
>>> 0x00400000 0x00400600
>>> [ 266.024381] ath10k_pci 0000:01:00.0: [56]: 0x80960E9D 0x00406AEC
>>> 0x00000000 0x00400600
>>> [ 266.032279] ath10k_pci 0000:01:00.0: Copy Engine register dump:
>>> [ 266.040186] ath10k_pci 0000:01:00.0: [00]: 0x0004a000 12 12 29 28
>>> [ 266.045999] ath10k_pci 0000:01:00.0: [01]: 0x0004a400 11 11 10 11
>>> [ 266.052595] ath10k_pci 0000:01:00.0: [02]: 0x0004a800 0 0 63 0
>>> [ 266.059018] ath10k_pci 0000:01:00.0: [03]: 0x0004ac00 0 0 0 0
>>> [ 266.065441] ath10k_pci 0000:01:00.0: [04]: 0x0004b000 0 0 0 0
>>> [ 266.071865] ath10k_pci 0000:01:00.0: [05]: 0x0004b400 0 0 0 0
>>> [ 266.078289] ath10k_pci 0000:01:00.0: [06]: 0x0004b800 0 0 0 0
>>> [ 266.084713] ath10k_pci 0000:01:00.0: [07]: 0x0004bc00 1 1 1 1
>>> [ 266.091136] ath10k_pci 0000:01:00.0: [08]: 0x0004c000 0 0 127 0
>>> [ 266.097559] ath10k_pci 0000:01:00.0: [09]: 0x0004c400 1 1 1 1
>>> [ 266.103982] ath10k_pci 0000:01:00.0: [10]: 0x0004c800 0 0 0 0
>>> [ 266.110408] ath10k_pci 0000:01:00.0: [11]: 0x0004cc00 0 0 0 0
>>> [ 266.876609] ath10k_pci 0000:01:00.0: failed to receive control
>>> response completion, polling..
>>> [ 267.915918] ath10k_pci 0000:01:00.0: ctl_resp never came in (-110)
>>> [ 267.915970] ath10k_pci 0000:01:00.0: failed to connect to HTC: -110
>>> [ 267.996406] ath10k_pci 0000:01:00.0: could not init core (-110)
>>> [ 267.996972] ath10k_pci 0000:01:00.0: could not probe fw (-110)
>>> [ 268.001578] ath10k_pci 0001:01:00.0: assign IRQ: got 100
>>> [ 268.002612] ath10k_pci 0001:01:00.0: enabling bus mastering
>>> [ 268.003292] ath10k_pci 0001:01:00.0: pci irq msi oper_irq_mode 2
>>> irq_mode 0 reset_mode 0
>>> [ 268.032241] ath10k_pci 0000:01:00.0: cannot restart a device that
>>> hasn't been started
>>> [ 268.174893] ath10k_pci 0001:01:00.0: Direct firmware load for
>>> ath10k/QCA9984/hw1.0/firmware-6.bin failed with error -2
>>> [ 268.174936] ath10k_pci 0001:01:00.0: Falling back to user helper
>>> [ 268.206575] firmware ath10k!QCA9984!hw1.0!firmware-6.bin:
>>> firmware_loading_store: map pages failed
>>> [ 268.207955] ath10k_pci 0001:01:00.0: qca9984/qca9994 hw1.0 target
>>> 0x01000000 chip_id 0x00000000 sub 168c:cafe
>>> [ 268.214521] ath10k_pci 0001:01:00.0: kconfig debug 0 debugfs 1
>>> tracing 0 dfs 1 testmode 1
>>> [ 268.227852] ath10k_pci 0001:01:00.0: firmware ver
>>> 10.4-3.6.0.1-00003 api 5 features
>>> no-p2p,mfp,peer-flow-ctrl,btcoex-param,allows-mesh-bcast,no-ps crc32
>>> 266d70b0
>>> [ 269.485480] ath10k_pci 0001:01:00.0: board_file api 2 bmi_id 0:31
>>> crc32 dd6d039c
>>> [ 273.282901] ath10k_pci 0001:01:00.0: firmware crashed! (guid
>>> 28f0a68b-f881-40cb-b515-f4320b412b7a)
>>> [ 273.282982] ath10k_pci 0001:01:00.0: qca9984/qca9994 hw1.0 target
>>> 0x01000000 chip_id 0x00000000 sub 168c:cafe
>>> [ 273.290780] ath10k_pci 0001:01:00.0: kconfig debug 0 debugfs 1
>>> tracing 0 dfs 1 testmode 1
>>> [ 273.306323] ath10k_pci 0001:01:00.0: firmware ver
>>> 10.4-3.6.0.1-00003 api 5 features
>>> no-p2p,mfp,peer-flow-ctrl,btcoex-param,allows-mesh-bcast,no-ps crc32
>>> 266d70b0
>>> [ 273.310039] ath10k_pci 0001:01:00.0: board_file api 2 bmi_id 0:31
>>> crc32 dd6d039c
>>> [ 273.323420] ath10k_pci 0001:01:00.0: htt-ver 0.0 wmi-op 6 htt-op 4
>>> cal pre-cal-file max-sta 32 raw 0 hwcrypto 1
>>> [ 273.332841] ath10k_pci 0001:01:00.0: firmware register dump:
>>> [ 273.340604] ath10k_pci 0001:01:00.0: [00]: 0x01000000 0x000015B3
>>> 0x009CC074 0x00975B31
>>> [ 273.346508] ath10k_pci 0001:01:00.0: [04]: 0x009CC074 0x00060530
>>> 0x00000011 0x004142FC
>>> [ 273.354234] ath10k_pci 0001:01:00.0: [08]: 0x00416AFC 0x00400000
>>> 0x00000001 0x00421F90
>>> [ 273.362135] ath10k_pci 0001:01:00.0: [12]: 0x00000009 0xFFFFFFFF
>>> 0x00973B25 0x00973B47
>>> [ 273.370033] ath10k_pci 0001:01:00.0: [16]: 0x009CC074 0x000CFE13
>>> 0x00000000 0x00000000
>>> [ 273.377932] ath10k_pci 0001:01:00.0: [20]: 0x409CC074 0x004068DC
>>> 0x00000001 0x00403628
>>> [ 273.385833] ath10k_pci 0001:01:00.0: [24]: 0x8098153B 0x0040693C
>>> 0x0000004E 0xC09CC074
>>> [ 273.393732] ath10k_pci 0001:01:00.0: [28]: 0x800E026F 0x004069AC
>>> 0x00000004 0x00413E60
>>> [ 273.401631] ath10k_pci 0001:01:00.0: [32]: 0x800C383A 0x004069DC
>>> 0x00413CB0 0x00400000
>>> [ 273.409529] ath10k_pci 0001:01:00.0: [36]: 0x809800A3 0x00406A0C
>>> 0x00413CC0 0x009C4750
>>> [ 273.417429] ath10k_pci 0001:01:00.0: [40]: 0x8098003A 0x00406A5C
>>> 0x00400000 0x00400600
>>> [ 273.425329] ath10k_pci 0001:01:00.0: [44]: 0x809607C1 0x00406A8C
>>> 0xD8400100 0x00406A9C
>>> [ 273.433227] ath10k_pci 0001:01:00.0: [48]: 0x80960892 0x00406AAC
>>> 0x00000000 0x00000008
>>> [ 273.441127] ath10k_pci 0001:01:00.0: [52]: 0x80960E39 0x00406ACC
>>> 0x00400000 0x00400600
>>> [ 273.449027] ath10k_pci 0001:01:00.0: [56]: 0x80960E9D 0x00406AEC
>>> 0x00000000 0x00400600
>>> [ 273.456924] ath10k_pci 0001:01:00.0: Copy Engine register dump:
>>> [ 273.464831] ath10k_pci 0001:01:00.0: [00]: 0x0004a000 12 12 29 28
>>> [ 273.470647] ath10k_pci 0001:01:00.0: [01]: 0x0004a400 11 11 10 11
>>> [ 273.477243] ath10k_pci 0001:01:00.0: [02]: 0x0004a800 0 0 63 0
>>> [ 273.483664] ath10k_pci 0001:01:00.0: [03]: 0x0004ac00 0 0 0 0
>>> [ 273.490088] ath10k_pci 0001:01:00.0: [04]: 0x0004b000 0 0 0 0
>>> [ 273.496512] ath10k_pci 0001:01:00.0: [05]: 0x0004b400 0 0 0 0
>>> [ 273.502936] ath10k_pci 0001:01:00.0: [06]: 0x0004b800 0 0 0 0
>>> [ 273.509360] ath10k_pci 0001:01:00.0: [07]: 0x0004bc00 1 1 1 1
>>> [ 273.515783] ath10k_pci 0001:01:00.0: [08]: 0x0004c000 0 0 127 0
>>> [ 273.522208] ath10k_pci 0001:01:00.0: [09]: 0x0004c400 1 1 1 1
>>> [ 273.528632] ath10k_pci 0001:01:00.0: [10]: 0x0004c800 0 0 0 0
>>> [ 273.535054] ath10k_pci 0001:01:00.0: [11]: 0x0004cc00 0 0 0 0
>>> [ 274.326491] ath10k_pci 0001:01:00.0: failed to receive control
>>> response completion, polling..
>>> [ 275.356625] ath10k_pci 0001:01:00.0: ctl_resp never came in (-110)
>>> [ 275.356672] ath10k_pci 0001:01:00.0: failed to connect to HTC: -110
>>> [ 275.436389] ath10k_pci 0001:01:00.0: could not init core (-110)
>>> [ 275.436925] ath10k_pci 0001:01:00.0: could not probe fw (-110)
>>> [ 275.472295] ath10k_pci 0001:01:00.0: cannot restart a device that
>>> hasn't been started
>>>
>>> Various tests with others firmware from candelatech , stock LEDE 17.01
>>> or dd-wrt give me firmware crash also
>>>
>>> I already tried to enable debug info for firmware crash with 'rmmod
>>> ath10k_pci; rmmod ath10k_core; modprobe ath10k_core
>>> debug_mask=0xffffffff ; modprobe ath10k_pci ' but without success
>>>
>>> Flashing back netgear factory firmware is OK, and all is functionnal
>>>
>>> What can I do next ?
>>>
>>> Thanks all
>>>