Hi all. I have 3.18.3 kernel and bcm43228, firstly all works fine, but
after connection with my zyxel router i can't ping it ip (after 1-2
min). Connection worked fin, but nothing transmitted =(.
I'm try to disable qos, but this not helps, i'm try to enable
verbose=3, but in dmesg nothing interesting. Time after time b43
driver moved from 5Ghz to 2.4Ghz to 5Ghz and so.
How can i debug this issue? I'm realy love free opensource drivers.
Thanks
--
Vasiliy Tolstov,
e-mail: [email protected]
jabber: [email protected]
2015-01-19 18:45 GMT+03:00 Arend van Spriel <[email protected]>:
> What do you mean by "moved from 5Ghz to 2.4Ghz..". You mean it is roaming
> between the two bands?
Yes, i have zyxel keenetic start that supports b/g/n
> Anyway, there is a b43 specific mailing list which I
> added.
Thanks. I don't know about this list.
--
Vasiliy Tolstov,
e-mail: [email protected]
jabber: [email protected]
On 01/20/15 11:24, Vasiliy Tolstov wrote:
> 2015-01-19 18:45 GMT+03:00 Arend van Spriel<[email protected]>:
>> What do you mean by "moved from 5Ghz to 2.4Ghz..". You mean it is roaming
>> between the two bands?
>
> Yes, i have zyxel keenetic start that supports b/g/n
'b/g' is in 2.4G band. 'n' is in both 2.4G and 5G band. Assume it can do
'a' as well. Anyway, does that router let you specify the SSID for both
2.4G and 5G. Are you using same SSID for both?
Regards,
Arend
>> Anyway, there is a b43 specific mailing list which I
>> added.
>
>
> Thanks. I don't know about this list.
>
Anybody can helps me debug this?
2015-01-17 20:59 GMT+03:00 Vasiliy Tolstov <[email protected]>:
> Hi all. I have 3.18.3 kernel and bcm43228, firstly all works fine, but
> after connection with my zyxel router i can't ping it ip (after 1-2
> min). Connection worked fin, but nothing transmitted =(.
> I'm try to disable qos, but this not helps, i'm try to enable
> verbose=3, but in dmesg nothing interesting. Time after time b43
> driver moved from 5Ghz to 2.4Ghz to 5Ghz and so.
> How can i debug this issue? I'm realy love free opensource drivers.
> Thanks
>
> --
> Vasiliy Tolstov,
> e-mail: [email protected]
> jabber: [email protected]
--
Vasiliy Tolstov,
e-mail: [email protected]
jabber: [email protected]
+ [email protected]
On 01/19/15 13:20, Vasiliy Tolstov wrote:
> Anybody can helps me debug this?
>
> 2015-01-17 20:59 GMT+03:00 Vasiliy Tolstov<[email protected]>:
>> Hi all. I have 3.18.3 kernel and bcm43228, firstly all works fine, but
>> after connection with my zyxel router i can't ping it ip (after 1-2
>> min). Connection worked fin, but nothing transmitted =(.
>> I'm try to disable qos, but this not helps, i'm try to enable
>> verbose=3, but in dmesg nothing interesting. Time after time b43
>> driver moved from 5Ghz to 2.4Ghz to 5Ghz and so.
What do you mean by "moved from 5Ghz to 2.4Ghz..". You mean it is
roaming between the two bands? Anyway, there is a b43 specific mailing
list which I added.
Regards,
Arend
>> How can i debug this issue? I'm realy love free opensource drivers.
>> Thanks
>>
>> --
>> Vasiliy Tolstov,
>> e-mail: [email protected]
>> jabber: [email protected]
>
>
>
2015-01-20 13:31 GMT+03:00 Arend van Spriel <[email protected]>:
> 'b/g' is in 2.4G band. 'n' is in both 2.4G and 5G band. Assume it can do 'a'
> as well. Anyway, does that router let you specify the SSID for both 2.4G and
> 5G. Are you using same SSID for both?
As i see i can't specify different SSID for 2.4G and 5G (only one ssid
available). Does it possible to not roam between bands in b43 driver?
--
Vasiliy Tolstov,
e-mail: [email protected]
jabber: [email protected]
I'm switch to 3.19 kernel, now debug info contains:
[ 286.557369] b43-phy0 ERROR: PHY transmission error
[ 286.557551] b43-phy0 ERROR: PHY transmission error
[ 290.412335] b43-phy0 ERROR: PHY transmission error
[ 303.809876] b43-phy0 debug: Switching to 5 GHz band
[ 303.957855] b43-phy0 debug: Switching to 2.4 GHz band
[ 304.296705] b43-phy0 debug: Switching to 5 GHz band
[ 304.444641] b43-phy0 debug: Switching to 2.4 GHz band
[ 304.784427] b43-phy0 debug: Switching to 5 GHz band
[ 304.932492] b43-phy0 debug: Switching to 2.4 GHz band
[ 305.273372] b43-phy0 debug: Switching to 5 GHz band
[ 305.424327] b43-phy0 debug: Switching to 2.4 GHz band
and i have sometimes stuck in tcp/udp transmissions.
2015-01-20 13:48 GMT+03:00 Vasiliy Tolstov <[email protected]>:
> 2015-01-20 13:31 GMT+03:00 Arend van Spriel <[email protected]>:
>> 'b/g' is in 2.4G band. 'n' is in both 2.4G and 5G band. Assume it can do 'a'
>> as well. Anyway, does that router let you specify the SSID for both 2.4G and
>> 5G. Are you using same SSID for both?
>
>
> As i see i can't specify different SSID for 2.4G and 5G (only one ssid
> available). Does it possible to not roam between bands in b43 driver?
>
> --
> Vasiliy Tolstov,
> e-mail: [email protected]
> jabber: [email protected]
--
Vasiliy Tolstov,
e-mail: [email protected]
jabber: [email protected]