2019-01-11 12:11:56

by Matthias Brugger

Subject: [GIT PULL] Add NVRAM files for bcm43455 and bcm43430

Hi Josh,
Hi all,

This pull request add firmware files neede by bcm43430 for Raspberry Pi 3 Model
B and bcm43455 for Raspberry Pi 3 Model B+.

Please have a look and, if convenient, pull :)

Best regards,
Matthias

---
The following changes since commit 0f22c8527439eaaf5c3fcf87b31c89445b6fa84d:

Revert "amdgpu: update vega10 fw for 18.50 release" (2018-12-18 15:38:53 -0500)

are available in the Git repository at:


ssh://[email protected]/pub/scm/linux/kernel/git/matthias.bgg/linux-firmware.git/
tags/add-rpi-fw

for you to fetch changes up to 930f276f8f1f2d83e44da6a32f4e0b2513db21a2:

brcm: Add BCM43430 NVRAM for the Raspberry Pi 3 Model B (2019-01-11 13:04:43
+0100)

----------------------------------------------------------------
- Add NVRAM for BCM43455 used by Raspberry Pi 3 Model B+
- Add NVRAM for BCM43430 used by Raspberry Pi 3 Model B

----------------------------------------------------------------
Matthias Brugger (2):
brcm: Add BCM43455 NVRAM for Raspberry Pi 3 B+
brcm: Add BCM43430 NVRAM for the Raspberry Pi 3 Model B

WHENCE | 3 +
brcm/brcmfmac43430-sdio.raspberrypi-rpi.txt | 47 ++++++++++++++++
brcm/brcmfmac43455-sdio.clm_blob | Bin 0 -> 14036 bytes
brcm/brcmfmac43455-sdio.raspberrypi-rpi.txt | 82 ++++++++++++++++++++++++++++
4 files changed, 132 insertions(+)
create mode 100644 brcm/brcmfmac43430-sdio.raspberrypi-rpi.txt
create mode 100644 brcm/brcmfmac43455-sdio.clm_blob
create mode 100644 brcm/brcmfmac43455-sdio.raspberrypi-rpi.txt

2019-01-14 15:33:56

by Josh Boyer

Subject: Re: [GIT PULL] Add NVRAM files for bcm43455 and bcm43430

On Fri, Jan 11, 2019 at 7:11 AM Matthias Brugger <[email protected]> wrote:
>
> Hi Josh,
> Hi all,
>
> This pull request add firmware files neede by bcm43430 for Raspberry Pi 3 Model
> B and bcm43455 for Raspberry Pi 3 Model B+.
>
> Please have a look and, if convenient, pull :)
>
> Best regards,
> Matthias
>
> ---
> The following changes since commit 0f22c8527439eaaf5c3fcf87b31c89445b6fa84d:
>
> Revert "amdgpu: update vega10 fw for 18.50 release" (2018-12-18 15:38:53 -0500)
>
> are available in the Git repository at:
>
>
> ssh://[email protected]/pub/scm/linux/kernel/git/matthias.bgg/linux-firmware.git/
> tags/add-rpi-fw
>
> for you to fetch changes up to 930f276f8f1f2d83e44da6a32f4e0b2513db21a2:
>
> brcm: Add BCM43430 NVRAM for the Raspberry Pi 3 Model B (2019-01-11 13:04:43
> +0100)
>
> ----------------------------------------------------------------
> - Add NVRAM for BCM43455 used by Raspberry Pi 3 Model B+
> - Add NVRAM for BCM43430 used by Raspberry Pi 3 Model B
>
> ----------------------------------------------------------------
> Matthias Brugger (2):
> brcm: Add BCM43455 NVRAM for Raspberry Pi 3 B+
> brcm: Add BCM43430 NVRAM for the Raspberry Pi 3 Model B
>
> WHENCE | 3 +
> brcm/brcmfmac43430-sdio.raspberrypi-rpi.txt | 47 ++++++++++++++++
> brcm/brcmfmac43455-sdio.clm_blob | Bin 0 -> 14036 bytes
> brcm/brcmfmac43455-sdio.raspberrypi-rpi.txt | 82 ++++++++++++++++++++++++++++
> 4 files changed, 132 insertions(+)
> create mode 100644 brcm/brcmfmac43430-sdio.raspberrypi-rpi.txt
> create mode 100644 brcm/brcmfmac43455-sdio.clm_blob
> create mode 100644 brcm/brcmfmac43455-sdio.raspberrypi-rpi.txt

Pulled and pushed out.

josh

2019-01-14 17:32:30

by Josh Boyer

Subject: Re: [GIT PULL] Add NVRAM files for bcm43455 and bcm43430

On Mon, Jan 14, 2019 at 10:33 AM Josh Boyer <[email protected]> wrote:
>
> On Fri, Jan 11, 2019 at 7:11 AM Matthias Brugger <[email protected]> wrote:
> >
> > Hi Josh,
> > Hi all,
> >
> > This pull request add firmware files neede by bcm43430 for Raspberry Pi 3 Model
> > B and bcm43455 for Raspberry Pi 3 Model B+.
> >
> > Please have a look and, if convenient, pull :)
> >
> > Best regards,
> > Matthias
> >
> > ---
> > The following changes since commit 0f22c8527439eaaf5c3fcf87b31c89445b6fa84d:
> >
> > Revert "amdgpu: update vega10 fw for 18.50 release" (2018-12-18 15:38:53 -0500)
> >
> > are available in the Git repository at:
> >
> >
> > ssh://[email protected]/pub/scm/linux/kernel/git/matthias.bgg/linux-firmware.git/
> > tags/add-rpi-fw
> >
> > for you to fetch changes up to 930f276f8f1f2d83e44da6a32f4e0b2513db21a2:
> >
> > brcm: Add BCM43430 NVRAM for the Raspberry Pi 3 Model B (2019-01-11 13:04:43
> > +0100)
> >
> > ----------------------------------------------------------------
> > - Add NVRAM for BCM43455 used by Raspberry Pi 3 Model B+
> > - Add NVRAM for BCM43430 used by Raspberry Pi 3 Model B
> >
> > ----------------------------------------------------------------
> > Matthias Brugger (2):
> > brcm: Add BCM43455 NVRAM for Raspberry Pi 3 B+
> > brcm: Add BCM43430 NVRAM for the Raspberry Pi 3 Model B
> >
> > WHENCE | 3 +
> > brcm/brcmfmac43430-sdio.raspberrypi-rpi.txt | 47 ++++++++++++++++
> > brcm/brcmfmac43455-sdio.clm_blob | Bin 0 -> 14036 bytes
> > brcm/brcmfmac43455-sdio.raspberrypi-rpi.txt | 82 ++++++++++++++++++++++++++++
> > 4 files changed, 132 insertions(+)
> > create mode 100644 brcm/brcmfmac43430-sdio.raspberrypi-rpi.txt
> > create mode 100644 brcm/brcmfmac43455-sdio.clm_blob
> > create mode 100644 brcm/brcmfmac43455-sdio.raspberrypi-rpi.txt
>
> Pulled and pushed out.

I reverted commit fca5958287a3e5e0bd1676af0ca4fc2fb9704b42 as there is
some question around the clm_blob file an license applicability. If
that gets resolved, please submit a new patch to add those files.

josh

2019-01-14 17:54:36

by Matthias Brugger

Subject: Re: [GIT PULL] Add NVRAM files for bcm43455 and bcm43430

Hi Josh,

On 14/01/2019 18:32, Josh Boyer wrote:
> On Mon, Jan 14, 2019 at 10:33 AM Josh Boyer <[email protected]> wrote:
>>
>> On Fri, Jan 11, 2019 at 7:11 AM Matthias Brugger <[email protected]> wrote:
>>>
>>> Hi Josh,
>>> Hi all,
>>>
>>> This pull request add firmware files neede by bcm43430 for Raspberry Pi 3 Model
>>> B and bcm43455 for Raspberry Pi 3 Model B+.
>>>
>>> Please have a look and, if convenient, pull :)
>>>
>>> Best regards,
>>> Matthias
>>>
>>> ---
>>> The following changes since commit 0f22c8527439eaaf5c3fcf87b31c89445b6fa84d:
>>>
>>> Revert "amdgpu: update vega10 fw for 18.50 release" (2018-12-18 15:38:53 -0500)
>>>
>>> are available in the Git repository at:
>>>
>>>
>>> ssh://[email protected]/pub/scm/linux/kernel/git/matthias.bgg/linux-firmware.git/
>>> tags/add-rpi-fw
>>>
>>> for you to fetch changes up to 930f276f8f1f2d83e44da6a32f4e0b2513db21a2:
>>>
>>> brcm: Add BCM43430 NVRAM for the Raspberry Pi 3 Model B (2019-01-11 13:04:43
>>> +0100)
>>>
>>> ----------------------------------------------------------------
>>> - Add NVRAM for BCM43455 used by Raspberry Pi 3 Model B+
>>> - Add NVRAM for BCM43430 used by Raspberry Pi 3 Model B
>>>
>>> ----------------------------------------------------------------
>>> Matthias Brugger (2):
>>> brcm: Add BCM43455 NVRAM for Raspberry Pi 3 B+
>>> brcm: Add BCM43430 NVRAM for the Raspberry Pi 3 Model B
>>>
>>> WHENCE | 3 +
>>> brcm/brcmfmac43430-sdio.raspberrypi-rpi.txt | 47 ++++++++++++++++
>>> brcm/brcmfmac43455-sdio.clm_blob | Bin 0 -> 14036 bytes
>>> brcm/brcmfmac43455-sdio.raspberrypi-rpi.txt | 82 ++++++++++++++++++++++++++++
>>> 4 files changed, 132 insertions(+)
>>> create mode 100644 brcm/brcmfmac43430-sdio.raspberrypi-rpi.txt
>>> create mode 100644 brcm/brcmfmac43455-sdio.clm_blob
>>> create mode 100644 brcm/brcmfmac43455-sdio.raspberrypi-rpi.txt
>>
>> Pulled and pushed out.
>
> I reverted commit fca5958287a3e5e0bd1676af0ca4fc2fb9704b42 as there is
> some question around the clm_blob file an license applicability. If
> that gets resolved, please submit a new patch to add those files.
>

Thanks, actually I realized that there are some more problems with this pull
request, so thank you for reverting. I'll send a new one soon.

Regards,
Matthias