The following set of patches include wil6210 bug fixes
Lazar Alexei (1):
wil6210: Fix driver down flow
Lior David (2):
wil6210: change HALP logging category to IRQ
wil6210: fix wiphy registration sequence
Maya Erez (5):
wil6210: align to latest auto generated wmi.h
wil6210: fix HALP handling in case of HALP vote time-out
wil6210: support rx key setting for all TIDs
wil6210: fix stop p2p device handling
wil6210: prevent usage of incorrect TX hwtail
drivers/net/wireless/ath/wil6210/cfg80211.c | 148 ++++---
drivers/net/wireless/ath/wil6210/interrupt.c | 15 +-
drivers/net/wireless/ath/wil6210/main.c | 54 +--
drivers/net/wireless/ath/wil6210/netdev.c | 32 +-
drivers/net/wireless/ath/wil6210/p2p.c | 46 ++
drivers/net/wireless/ath/wil6210/pcie_bus.c | 5 +-
drivers/net/wireless/ath/wil6210/txrx.c | 9 +-
drivers/net/wireless/ath/wil6210/wil6210.h | 2 +
drivers/net/wireless/ath/wil6210/wmi.h | 640 +++++++++++++++++++++++----
9 files changed, 768 insertions(+), 183 deletions(-)
--
1.9.1
According to the spec the PN should be calculated per TID.
In the current implementation, the PN and key_set were set
only for TID 0, therefore only traffic for TID 0 was supported.
In order to support all TIDs, the key_set and PN should be set
for all the TIDs.
Signed-off-by: Maya Erez <[email protected]>
---
drivers/net/wireless/ath/wil6210/cfg80211.c | 116 +++++++++++++++++++---------
1 file changed, 81 insertions(+), 35 deletions(-)
diff --git a/drivers/net/wireless/ath/wil6210/cfg80211.c b/drivers/net/wireless/ath/wil6210/cfg80211.c
index f0e1175..110098e 100644
--- a/drivers/net/wireless/ath/wil6210/cfg80211.c
+++ b/drivers/net/wireless/ath/wil6210/cfg80211.c
@@ -760,14 +760,11 @@ static enum wmi_key_usage wil_detect_key_usage(struct wil6210_priv *wil,
return rc;
}
-static struct wil_tid_crypto_rx_single *
-wil_find_crypto_ctx(struct wil6210_priv *wil, u8 key_index,
- enum wmi_key_usage key_usage, const u8 *mac_addr)
+static struct wil_sta_info *
+wil_find_sta_by_key_usage(struct wil6210_priv *wil,
+ enum wmi_key_usage key_usage, const u8 *mac_addr)
{
int cid = -EINVAL;
- int tid = 0;
- struct wil_sta_info *s;
- struct wil_tid_crypto_rx *c;
if (key_usage == WMI_KEY_USE_TX_GROUP)
return NULL; /* not needed */
@@ -778,18 +775,72 @@ wil_find_crypto_ctx(struct wil6210_priv *wil, u8 key_index,
else if (key_usage == WMI_KEY_USE_RX_GROUP)
cid = wil_find_cid_by_idx(wil, 0);
if (cid < 0) {
- wil_err(wil, "No CID for %pM %s[%d]\n", mac_addr,
- key_usage_str[key_usage], key_index);
+ wil_err(wil, "No CID for %pM %s\n", mac_addr,
+ key_usage_str[key_usage]);
return ERR_PTR(cid);
}
- s = &wil->sta[cid];
- if (key_usage == WMI_KEY_USE_PAIRWISE)
- c = &s->tid_crypto_rx[tid];
- else
- c = &s->group_crypto_rx;
+ return &wil->sta[cid];
+}
+
+static void wil_set_crypto_rx(u8 key_index, enum wmi_key_usage key_usage,
+ struct wil_sta_info *cs,
+ struct key_params *params)
+{
+ struct wil_tid_crypto_rx_single *cc;
+ int tid;
+
+ if (!cs)
+ return;
- return &c->key_id[key_index];
+ switch (key_usage) {
+ case WMI_KEY_USE_PAIRWISE:
+ for (tid = 0; tid < WIL_STA_TID_NUM; tid++) {
+ cc = &cs->tid_crypto_rx[tid].key_id[key_index];
+ if (params->seq)
+ memcpy(cc->pn, params->seq,
+ IEEE80211_GCMP_PN_LEN);
+ else
+ memset(cc->pn, 0, IEEE80211_GCMP_PN_LEN);
+ cc->key_set = true;
+ }
+ break;
+ case WMI_KEY_USE_RX_GROUP:
+ cc = &cs->group_crypto_rx.key_id[key_index];
+ if (params->seq)
+ memcpy(cc->pn, params->seq, IEEE80211_GCMP_PN_LEN);
+ else
+ memset(cc->pn, 0, IEEE80211_GCMP_PN_LEN);
+ cc->key_set = true;
+ break;
+ default:
+ break;
+ }
+}
+
+static void wil_del_rx_key(u8 key_index, enum wmi_key_usage key_usage,
+ struct wil_sta_info *cs)
+{
+ struct wil_tid_crypto_rx_single *cc;
+ int tid;
+
+ if (!cs)
+ return;
+
+ switch (key_usage) {
+ case WMI_KEY_USE_PAIRWISE:
+ for (tid = 0; tid < WIL_STA_TID_NUM; tid++) {
+ cc = &cs->tid_crypto_rx[tid].key_id[key_index];
+ cc->key_set = false;
+ }
+ break;
+ case WMI_KEY_USE_RX_GROUP:
+ cc = &cs->group_crypto_rx.key_id[key_index];
+ cc->key_set = false;
+ break;
+ default:
+ break;
+ }
}
static int wil_cfg80211_add_key(struct wiphy *wiphy,
@@ -801,24 +852,26 @@ static int wil_cfg80211_add_key(struct wiphy *wiphy,
int rc;
struct wil6210_priv *wil = wiphy_to_wil(wiphy);
enum wmi_key_usage key_usage = wil_detect_key_usage(wil, pairwise);
- struct wil_tid_crypto_rx_single *cc = wil_find_crypto_ctx(wil,
- key_index,
- key_usage,
- mac_addr);
+ struct wil_sta_info *cs = wil_find_sta_by_key_usage(wil, key_usage,
+ mac_addr);
+
+ if (!params) {
+ wil_err(wil, "NULL params\n");
+ return -EINVAL;
+ }
wil_dbg_misc(wil, "%s(%pM %s[%d] PN %*phN)\n", __func__,
mac_addr, key_usage_str[key_usage], key_index,
params->seq_len, params->seq);
- if (IS_ERR(cc)) {
+ if (IS_ERR(cs)) {
wil_err(wil, "Not connected, %s(%pM %s[%d] PN %*phN)\n",
__func__, mac_addr, key_usage_str[key_usage], key_index,
params->seq_len, params->seq);
return -EINVAL;
}
- if (cc)
- cc->key_set = false;
+ wil_del_rx_key(key_index, key_usage, cs);
if (params->seq && params->seq_len != IEEE80211_GCMP_PN_LEN) {
wil_err(wil,
@@ -831,13 +884,8 @@ static int wil_cfg80211_add_key(struct wiphy *wiphy,
rc = wmi_add_cipher_key(wil, key_index, mac_addr, params->key_len,
params->key, key_usage);
- if ((rc == 0) && cc) {
- if (params->seq)
- memcpy(cc->pn, params->seq, IEEE80211_GCMP_PN_LEN);
- else
- memset(cc->pn, 0, IEEE80211_GCMP_PN_LEN);
- cc->key_set = true;
- }
+ if (!rc)
+ wil_set_crypto_rx(key_index, key_usage, cs, params);
return rc;
}
@@ -849,20 +897,18 @@ static int wil_cfg80211_del_key(struct wiphy *wiphy,
{
struct wil6210_priv *wil = wiphy_to_wil(wiphy);
enum wmi_key_usage key_usage = wil_detect_key_usage(wil, pairwise);
- struct wil_tid_crypto_rx_single *cc = wil_find_crypto_ctx(wil,
- key_index,
- key_usage,
- mac_addr);
+ struct wil_sta_info *cs = wil_find_sta_by_key_usage(wil, key_usage,
+ mac_addr);
wil_dbg_misc(wil, "%s(%pM %s[%d])\n", __func__, mac_addr,
key_usage_str[key_usage], key_index);
- if (IS_ERR(cc))
+ if (IS_ERR(cs))
wil_info(wil, "Not connected, %s(%pM %s[%d])\n", __func__,
mac_addr, key_usage_str[key_usage], key_index);
- if (!IS_ERR_OR_NULL(cc))
- cc->key_set = false;
+ if (!IS_ERR_OR_NULL(cs))
+ wil_del_rx_key(key_index, key_usage, cs);
return wmi_del_cipher_key(wil, key_index, mac_addr, key_usage);
}
--
1.9.1
fix stop p2p device handling to identify between search
and listen and update the upper layers with the appropriate
notification.
The stop of p2p radio operations also needs to be performed
in __wil_down.
Signed-off-by: Maya Erez <[email protected]>
---
drivers/net/wireless/ath/wil6210/cfg80211.c | 25 ++++++----------
drivers/net/wireless/ath/wil6210/main.c | 2 +-
drivers/net/wireless/ath/wil6210/p2p.c | 46 +++++++++++++++++++++++++++++
drivers/net/wireless/ath/wil6210/pcie_bus.c | 5 +++-
drivers/net/wireless/ath/wil6210/wil6210.h | 1 +
5 files changed, 61 insertions(+), 18 deletions(-)
diff --git a/drivers/net/wireless/ath/wil6210/cfg80211.c b/drivers/net/wireless/ath/wil6210/cfg80211.c
index 110098e..310a385 100644
--- a/drivers/net/wireless/ath/wil6210/cfg80211.c
+++ b/drivers/net/wireless/ath/wil6210/cfg80211.c
@@ -1409,23 +1409,16 @@ static void wil_cfg80211_stop_p2p_device(struct wiphy *wiphy,
struct wireless_dev *wdev)
{
struct wil6210_priv *wil = wiphy_to_wil(wiphy);
- u8 started;
+ struct wil_p2p_info *p2p = &wil->p2p;
+
+ if (!p2p->p2p_dev_started)
+ return;
wil_dbg_misc(wil, "%s: entered\n", __func__);
mutex_lock(&wil->mutex);
- started = wil_p2p_stop_discovery(wil);
- if (started && wil->scan_request) {
- struct cfg80211_scan_info info = {
- .aborted = true,
- };
-
- cfg80211_scan_done(wil->scan_request, &info);
- wil->scan_request = NULL;
- wil->radio_wdev = wil->wdev;
- }
+ wil_p2p_stop_radio_operations(wil);
+ p2p->p2p_dev_started = 0;
mutex_unlock(&wil->mutex);
-
- wil->p2p.p2p_dev_started = 0;
}
static struct cfg80211_ops wil_cfg80211_ops = {
@@ -1544,11 +1537,11 @@ void wil_p2p_wdev_free(struct wil6210_priv *wil)
mutex_lock(&wil->p2p_wdev_mutex);
p2p_wdev = wil->p2p_wdev;
+ wil->p2p_wdev = NULL;
+ wil->radio_wdev = wil_to_wdev(wil);
+ mutex_unlock(&wil->p2p_wdev_mutex);
if (p2p_wdev) {
- wil->p2p_wdev = NULL;
- wil->radio_wdev = wil_to_wdev(wil);
cfg80211_unregister_wdev(p2p_wdev);
kfree(p2p_wdev);
}
- mutex_unlock(&wil->p2p_wdev_mutex);
}
diff --git a/drivers/net/wireless/ath/wil6210/main.c b/drivers/net/wireless/ath/wil6210/main.c
index 1205d76..bbc54ee 100644
--- a/drivers/net/wireless/ath/wil6210/main.c
+++ b/drivers/net/wireless/ath/wil6210/main.c
@@ -1050,7 +1050,7 @@ int __wil_down(struct wil6210_priv *wil)
}
wil_enable_irq(wil);
- (void)wil_p2p_stop_discovery(wil);
+ wil_p2p_stop_radio_operations(wil);
if (wil->scan_request) {
struct cfg80211_scan_info info = {
diff --git a/drivers/net/wireless/ath/wil6210/p2p.c b/drivers/net/wireless/ath/wil6210/p2p.c
index e0f8aa0..4087785 100644
--- a/drivers/net/wireless/ath/wil6210/p2p.c
+++ b/drivers/net/wireless/ath/wil6210/p2p.c
@@ -263,3 +263,49 @@ void wil_p2p_search_expired(struct work_struct *work)
mutex_unlock(&wil->p2p_wdev_mutex);
}
}
+
+void wil_p2p_stop_radio_operations(struct wil6210_priv *wil)
+{
+ struct wil_p2p_info *p2p = &wil->p2p;
+ struct cfg80211_scan_info info = {
+ .aborted = true,
+ };
+
+ lockdep_assert_held(&wil->mutex);
+
+ mutex_lock(&wil->p2p_wdev_mutex);
+
+ if (wil->radio_wdev != wil->p2p_wdev)
+ goto out;
+
+ if (!p2p->discovery_started) {
+ /* Regular scan on the p2p device */
+ if (wil->scan_request &&
+ wil->scan_request->wdev == wil->p2p_wdev) {
+ cfg80211_scan_done(wil->scan_request, &info);
+ wil->scan_request = NULL;
+ }
+ goto out;
+ }
+
+ /* Search or listen on p2p device */
+ mutex_unlock(&wil->p2p_wdev_mutex);
+ wil_p2p_stop_discovery(wil);
+ mutex_lock(&wil->p2p_wdev_mutex);
+
+ if (wil->scan_request) {
+ /* search */
+ cfg80211_scan_done(wil->scan_request, &info);
+ wil->scan_request = NULL;
+ } else {
+ /* listen */
+ cfg80211_remain_on_channel_expired(wil->radio_wdev,
+ p2p->cookie,
+ &p2p->listen_chan,
+ GFP_KERNEL);
+ }
+
+out:
+ wil->radio_wdev = wil->wdev;
+ mutex_unlock(&wil->p2p_wdev_mutex);
+}
diff --git a/drivers/net/wireless/ath/wil6210/pcie_bus.c b/drivers/net/wireless/ath/wil6210/pcie_bus.c
index 7b5c422..5b7a9d2 100644
--- a/drivers/net/wireless/ath/wil6210/pcie_bus.c
+++ b/drivers/net/wireless/ath/wil6210/pcie_bus.c
@@ -20,6 +20,7 @@
#include <linux/interrupt.h>
#include <linux/suspend.h>
#include "wil6210.h"
+#include <linux/rtnetlink.h>
static bool use_msi = true;
module_param(use_msi, bool, S_IRUGO);
@@ -293,6 +294,9 @@ static void wil_pcie_remove(struct pci_dev *pdev)
#endif /* CONFIG_PM */
wil6210_debugfs_remove(wil);
+ rtnl_lock();
+ wil_p2p_wdev_free(wil);
+ rtnl_unlock();
wil_if_remove(wil);
wil_if_pcie_disable(wil);
pci_iounmap(pdev, csr);
@@ -300,7 +304,6 @@ static void wil_pcie_remove(struct pci_dev *pdev)
pci_disable_device(pdev);
if (wil->platform_ops.uninit)
wil->platform_ops.uninit(wil->platform_handle);
- wil_p2p_wdev_free(wil);
wil_if_free(wil);
}
diff --git a/drivers/net/wireless/ath/wil6210/wil6210.h b/drivers/net/wireless/ath/wil6210/wil6210.h
index 9742446..6087691 100644
--- a/drivers/net/wireless/ath/wil6210/wil6210.h
+++ b/drivers/net/wireless/ath/wil6210/wil6210.h
@@ -841,6 +841,7 @@ u8 wil_p2p_stop_discovery(struct wil6210_priv *wil);
int wil_p2p_cancel_listen(struct wil6210_priv *wil, u64 cookie);
void wil_p2p_listen_expired(struct work_struct *work);
void wil_p2p_search_expired(struct work_struct *work);
+void wil_p2p_stop_radio_operations(struct wil6210_priv *wil);
/* WMI for P2P */
int wmi_p2p_cfg(struct wil6210_priv *wil, int channel, int bi);
--
1.9.1
Align to latest version of the auto generated wmi file
describing the interface with FW.
Signed-off-by: Maya Erez <[email protected]>
---
drivers/net/wireless/ath/wil6210/wmi.h | 640 +++++++++++++++++++++++++++++----
1 file changed, 561 insertions(+), 79 deletions(-)
diff --git a/drivers/net/wireless/ath/wil6210/wmi.h b/drivers/net/wireless/ath/wil6210/wmi.h
index 685fe0d..349510c 100644
--- a/drivers/net/wireless/ath/wil6210/wmi.h
+++ b/drivers/net/wireless/ath/wil6210/wmi.h
@@ -120,6 +120,8 @@ enum wmi_command_id {
WMI_BF_SM_MGMT_CMDID = 0x838,
WMI_BF_RXSS_MGMT_CMDID = 0x839,
WMI_BF_TRIG_CMDID = 0x83A,
+ WMI_LINK_MAINTAIN_CFG_WRITE_CMDID = 0x842,
+ WMI_LINK_MAINTAIN_CFG_READ_CMDID = 0x843,
WMI_SET_SECTORS_CMDID = 0x849,
WMI_MAINTAIN_PAUSE_CMDID = 0x850,
WMI_MAINTAIN_RESUME_CMDID = 0x851,
@@ -134,10 +136,15 @@ enum wmi_command_id {
WMI_BF_CTRL_CMDID = 0x862,
WMI_NOTIFY_REQ_CMDID = 0x863,
WMI_GET_STATUS_CMDID = 0x864,
+ WMI_GET_RF_STATUS_CMDID = 0x866,
+ WMI_GET_BASEBAND_TYPE_CMDID = 0x867,
WMI_UNIT_TEST_CMDID = 0x900,
WMI_HICCUP_CMDID = 0x901,
WMI_FLASH_READ_CMDID = 0x902,
WMI_FLASH_WRITE_CMDID = 0x903,
+ /* Power management */
+ WMI_TRAFFIC_DEFERRAL_CMDID = 0x904,
+ WMI_TRAFFIC_RESUME_CMDID = 0x905,
/* P2P */
WMI_P2P_CFG_CMDID = 0x910,
WMI_PORT_ALLOCATE_CMDID = 0x911,
@@ -150,6 +157,19 @@ enum wmi_command_id {
WMI_PCP_START_CMDID = 0x918,
WMI_PCP_STOP_CMDID = 0x919,
WMI_GET_PCP_FACTOR_CMDID = 0x91B,
+ /* Power Save Configuration Commands */
+ WMI_PS_DEV_PROFILE_CFG_CMDID = 0x91C,
+ /* Not supported yet */
+ WMI_PS_DEV_CFG_CMDID = 0x91D,
+ /* Not supported yet */
+ WMI_PS_DEV_CFG_READ_CMDID = 0x91E,
+ /* Per MAC Power Save Configuration commands
+ * Not supported yet
+ */
+ WMI_PS_MID_CFG_CMDID = 0x91F,
+ /* Not supported yet */
+ WMI_PS_MID_CFG_READ_CMDID = 0x920,
+ WMI_RS_CFG_CMDID = 0x921,
WMI_SET_MAC_ADDRESS_CMDID = 0xF003,
WMI_ABORT_SCAN_CMDID = 0xF007,
WMI_SET_PROMISCUOUS_MODE_CMDID = 0xF041,
@@ -291,9 +311,8 @@ enum wmi_scan_type {
/* WMI_START_SCAN_CMDID */
struct wmi_start_scan_cmd {
u8 direct_scan_mac_addr[WMI_MAC_LEN];
- /* DMG Beacon frame is transmitted during active scanning */
+ /* run scan with discovery beacon. Relevant for ACTIVE scan only. */
u8 discovery_mode;
- /* reserved */
u8 reserved;
/* Max duration in the home channel(ms) */
__le32 dwell_time;
@@ -453,6 +472,12 @@ struct wmi_port_delete_cmd {
u8 reserved[3];
} __packed;
+/* WMI_TRAFFIC_DEFERRAL_CMDID */
+struct wmi_traffic_deferral_cmd {
+ /* Bit vector: bit[0] - wake on Unicast, bit[1] - wake on Broadcast */
+ u8 wakeup_trigger;
+} __packed;
+
/* WMI_P2P_CFG_CMDID */
enum wmi_discovery_mode {
WMI_DISCOVERY_MODE_NON_OFFLOAD = 0x00,
@@ -822,81 +847,99 @@ struct wmi_pmc_cmd {
* List of Events (target to host)
*/
enum wmi_event_id {
- WMI_READY_EVENTID = 0x1001,
- WMI_CONNECT_EVENTID = 0x1002,
- WMI_DISCONNECT_EVENTID = 0x1003,
- WMI_SCAN_COMPLETE_EVENTID = 0x100A,
- WMI_REPORT_STATISTICS_EVENTID = 0x100B,
- WMI_RD_MEM_RSP_EVENTID = 0x1800,
- WMI_FW_READY_EVENTID = 0x1801,
- WMI_EXIT_FAST_MEM_ACC_MODE_EVENTID = 0x200,
- WMI_ECHO_RSP_EVENTID = 0x1803,
- WMI_FS_TUNE_DONE_EVENTID = 0x180A,
- WMI_CORR_MEASURE_EVENTID = 0x180B,
- WMI_READ_RSSI_EVENTID = 0x180C,
- WMI_TEMP_SENSE_DONE_EVENTID = 0x180E,
- WMI_DC_CALIB_DONE_EVENTID = 0x180F,
- WMI_IQ_TX_CALIB_DONE_EVENTID = 0x1811,
- WMI_IQ_RX_CALIB_DONE_EVENTID = 0x1812,
- WMI_SET_WORK_MODE_DONE_EVENTID = 0x1815,
- WMI_LO_LEAKAGE_CALIB_DONE_EVENTID = 0x1816,
- WMI_MARLON_R_READ_DONE_EVENTID = 0x1818,
- WMI_MARLON_R_WRITE_DONE_EVENTID = 0x1819,
- WMI_MARLON_R_TXRX_SEL_DONE_EVENTID = 0x181A,
- WMI_SILENT_RSSI_CALIB_DONE_EVENTID = 0x181D,
- WMI_RF_RX_TEST_DONE_EVENTID = 0x181E,
- WMI_CFG_RX_CHAIN_DONE_EVENTID = 0x1820,
- WMI_VRING_CFG_DONE_EVENTID = 0x1821,
- WMI_BA_STATUS_EVENTID = 0x1823,
- WMI_RCP_ADDBA_REQ_EVENTID = 0x1824,
- WMI_RCP_ADDBA_RESP_SENT_EVENTID = 0x1825,
- WMI_DELBA_EVENTID = 0x1826,
- WMI_GET_SSID_EVENTID = 0x1828,
- WMI_GET_PCP_CHANNEL_EVENTID = 0x182A,
- WMI_SW_TX_COMPLETE_EVENTID = 0x182B,
- WMI_READ_MAC_RXQ_EVENTID = 0x1830,
- WMI_READ_MAC_TXQ_EVENTID = 0x1831,
- WMI_WRITE_MAC_RXQ_EVENTID = 0x1832,
- WMI_WRITE_MAC_TXQ_EVENTID = 0x1833,
- WMI_WRITE_MAC_XQ_FIELD_EVENTID = 0x1834,
- WMI_BEAMFORMING_MGMT_DONE_EVENTID = 0x1836,
- WMI_BF_TXSS_MGMT_DONE_EVENTID = 0x1837,
- WMI_BF_RXSS_MGMT_DONE_EVENTID = 0x1839,
- WMI_RS_MGMT_DONE_EVENTID = 0x1852,
- WMI_RF_MGMT_STATUS_EVENTID = 0x1853,
- WMI_THERMAL_THROTTLING_STATUS_EVENTID = 0x1855,
- WMI_BF_SM_MGMT_DONE_EVENTID = 0x1838,
- WMI_RX_MGMT_PACKET_EVENTID = 0x1840,
- WMI_TX_MGMT_PACKET_EVENTID = 0x1841,
- WMI_OTP_READ_RESULT_EVENTID = 0x1856,
- WMI_LED_CFG_DONE_EVENTID = 0x1858,
+ WMI_READY_EVENTID = 0x1001,
+ WMI_CONNECT_EVENTID = 0x1002,
+ WMI_DISCONNECT_EVENTID = 0x1003,
+ WMI_SCAN_COMPLETE_EVENTID = 0x100A,
+ WMI_REPORT_STATISTICS_EVENTID = 0x100B,
+ WMI_RD_MEM_RSP_EVENTID = 0x1800,
+ WMI_FW_READY_EVENTID = 0x1801,
+ WMI_EXIT_FAST_MEM_ACC_MODE_EVENTID = 0x200,
+ WMI_ECHO_RSP_EVENTID = 0x1803,
+ WMI_FS_TUNE_DONE_EVENTID = 0x180A,
+ WMI_CORR_MEASURE_EVENTID = 0x180B,
+ WMI_READ_RSSI_EVENTID = 0x180C,
+ WMI_TEMP_SENSE_DONE_EVENTID = 0x180E,
+ WMI_DC_CALIB_DONE_EVENTID = 0x180F,
+ WMI_IQ_TX_CALIB_DONE_EVENTID = 0x1811,
+ WMI_IQ_RX_CALIB_DONE_EVENTID = 0x1812,
+ WMI_SET_WORK_MODE_DONE_EVENTID = 0x1815,
+ WMI_LO_LEAKAGE_CALIB_DONE_EVENTID = 0x1816,
+ WMI_MARLON_R_READ_DONE_EVENTID = 0x1818,
+ WMI_MARLON_R_WRITE_DONE_EVENTID = 0x1819,
+ WMI_MARLON_R_TXRX_SEL_DONE_EVENTID = 0x181A,
+ WMI_SILENT_RSSI_CALIB_DONE_EVENTID = 0x181D,
+ WMI_RF_RX_TEST_DONE_EVENTID = 0x181E,
+ WMI_CFG_RX_CHAIN_DONE_EVENTID = 0x1820,
+ WMI_VRING_CFG_DONE_EVENTID = 0x1821,
+ WMI_BA_STATUS_EVENTID = 0x1823,
+ WMI_RCP_ADDBA_REQ_EVENTID = 0x1824,
+ WMI_RCP_ADDBA_RESP_SENT_EVENTID = 0x1825,
+ WMI_DELBA_EVENTID = 0x1826,
+ WMI_GET_SSID_EVENTID = 0x1828,
+ WMI_GET_PCP_CHANNEL_EVENTID = 0x182A,
+ WMI_SW_TX_COMPLETE_EVENTID = 0x182B,
+ WMI_READ_MAC_RXQ_EVENTID = 0x1830,
+ WMI_READ_MAC_TXQ_EVENTID = 0x1831,
+ WMI_WRITE_MAC_RXQ_EVENTID = 0x1832,
+ WMI_WRITE_MAC_TXQ_EVENTID = 0x1833,
+ WMI_WRITE_MAC_XQ_FIELD_EVENTID = 0x1834,
+ WMI_BEAMFORMING_MGMT_DONE_EVENTID = 0x1836,
+ WMI_BF_TXSS_MGMT_DONE_EVENTID = 0x1837,
+ WMI_BF_RXSS_MGMT_DONE_EVENTID = 0x1839,
+ WMI_RS_MGMT_DONE_EVENTID = 0x1852,
+ WMI_RF_MGMT_STATUS_EVENTID = 0x1853,
+ WMI_THERMAL_THROTTLING_STATUS_EVENTID = 0x1855,
+ WMI_BF_SM_MGMT_DONE_EVENTID = 0x1838,
+ WMI_RX_MGMT_PACKET_EVENTID = 0x1840,
+ WMI_TX_MGMT_PACKET_EVENTID = 0x1841,
+ WMI_LINK_MAINTAIN_CFG_WRITE_DONE_EVENTID = 0x1842,
+ WMI_LINK_MAINTAIN_CFG_READ_DONE_EVENTID = 0x1843,
+ WMI_OTP_READ_RESULT_EVENTID = 0x1856,
+ WMI_LED_CFG_DONE_EVENTID = 0x1858,
/* Performance monitoring events */
- WMI_DATA_PORT_OPEN_EVENTID = 0x1860,
- WMI_WBE_LINK_DOWN_EVENTID = 0x1861,
- WMI_BF_CTRL_DONE_EVENTID = 0x1862,
- WMI_NOTIFY_REQ_DONE_EVENTID = 0x1863,
- WMI_GET_STATUS_DONE_EVENTID = 0x1864,
- WMI_VRING_EN_EVENTID = 0x1865,
- WMI_UNIT_TEST_EVENTID = 0x1900,
- WMI_FLASH_READ_DONE_EVENTID = 0x1902,
- WMI_FLASH_WRITE_DONE_EVENTID = 0x1903,
+ WMI_DATA_PORT_OPEN_EVENTID = 0x1860,
+ WMI_WBE_LINK_DOWN_EVENTID = 0x1861,
+ WMI_BF_CTRL_DONE_EVENTID = 0x1862,
+ WMI_NOTIFY_REQ_DONE_EVENTID = 0x1863,
+ WMI_GET_STATUS_DONE_EVENTID = 0x1864,
+ WMI_VRING_EN_EVENTID = 0x1865,
+ WMI_GET_RF_STATUS_EVENTID = 0x1866,
+ WMI_GET_BASEBAND_TYPE_EVENTID = 0x1867,
+ WMI_UNIT_TEST_EVENTID = 0x1900,
+ WMI_FLASH_READ_DONE_EVENTID = 0x1902,
+ WMI_FLASH_WRITE_DONE_EVENTID = 0x1903,
+ /* Power management */
+ WMI_TRAFFIC_DEFERRAL_EVENTID = 0x1904,
+ WMI_TRAFFIC_RESUME_EVENTID = 0x1905,
/* P2P */
- WMI_P2P_CFG_DONE_EVENTID = 0x1910,
- WMI_PORT_ALLOCATED_EVENTID = 0x1911,
- WMI_PORT_DELETED_EVENTID = 0x1912,
- WMI_LISTEN_STARTED_EVENTID = 0x1914,
- WMI_SEARCH_STARTED_EVENTID = 0x1915,
- WMI_DISCOVERY_STARTED_EVENTID = 0x1916,
- WMI_DISCOVERY_STOPPED_EVENTID = 0x1917,
- WMI_PCP_STARTED_EVENTID = 0x1918,
- WMI_PCP_STOPPED_EVENTID = 0x1919,
- WMI_PCP_FACTOR_EVENTID = 0x191A,
- WMI_SET_CHANNEL_EVENTID = 0x9000,
- WMI_ASSOC_REQ_EVENTID = 0x9001,
- WMI_EAPOL_RX_EVENTID = 0x9002,
- WMI_MAC_ADDR_RESP_EVENTID = 0x9003,
- WMI_FW_VER_EVENTID = 0x9004,
- WMI_ACS_PASSIVE_SCAN_COMPLETE_EVENTID = 0x9005,
+ WMI_P2P_CFG_DONE_EVENTID = 0x1910,
+ WMI_PORT_ALLOCATED_EVENTID = 0x1911,
+ WMI_PORT_DELETED_EVENTID = 0x1912,
+ WMI_LISTEN_STARTED_EVENTID = 0x1914,
+ WMI_SEARCH_STARTED_EVENTID = 0x1915,
+ WMI_DISCOVERY_STARTED_EVENTID = 0x1916,
+ WMI_DISCOVERY_STOPPED_EVENTID = 0x1917,
+ WMI_PCP_STARTED_EVENTID = 0x1918,
+ WMI_PCP_STOPPED_EVENTID = 0x1919,
+ WMI_PCP_FACTOR_EVENTID = 0x191A,
+ /* Power Save Configuration Events */
+ WMI_PS_DEV_PROFILE_CFG_EVENTID = 0x191C,
+ /* Not supported yet */
+ WMI_PS_DEV_CFG_EVENTID = 0x191D,
+ /* Not supported yet */
+ WMI_PS_DEV_CFG_READ_EVENTID = 0x191E,
+ /* Not supported yet */
+ WMI_PS_MID_CFG_EVENTID = 0x191F,
+ /* Not supported yet */
+ WMI_PS_MID_CFG_READ_EVENTID = 0x1920,
+ WMI_RS_CFG_DONE_EVENTID = 0x1921,
+ WMI_SET_CHANNEL_EVENTID = 0x9000,
+ WMI_ASSOC_REQ_EVENTID = 0x9001,
+ WMI_EAPOL_RX_EVENTID = 0x9002,
+ WMI_MAC_ADDR_RESP_EVENTID = 0x9003,
+ WMI_FW_VER_EVENTID = 0x9004,
+ WMI_ACS_PASSIVE_SCAN_COMPLETE_EVENTID = 0x9005,
};
/* Events data structures */
@@ -943,10 +986,78 @@ struct wmi_get_status_done_event {
/* WMI_FW_VER_EVENTID */
struct wmi_fw_ver_event {
- u8 major;
- u8 minor;
- __le16 subminor;
- __le16 build;
+ /* FW image version */
+ __le32 fw_major;
+ __le32 fw_minor;
+ __le32 fw_subminor;
+ __le32 fw_build;
+ /* FW image build time stamp */
+ __le32 hour;
+ __le32 minute;
+ __le32 second;
+ __le32 day;
+ __le32 month;
+ __le32 year;
+ /* Boot Loader image version */
+ __le32 bl_major;
+ __le32 bl_minor;
+ __le32 bl_subminor;
+ __le32 bl_build;
+} __packed;
+
+/* WMI_GET_RF_STATUS_EVENTID */
+enum rf_type {
+ RF_UNKNOWN = 0x00,
+ RF_MARLON = 0x01,
+ RF_SPARROW = 0x02,
+};
+
+/* WMI_GET_RF_STATUS_EVENTID */
+enum board_file_rf_type {
+ BF_RF_MARLON = 0x00,
+ BF_RF_SPARROW = 0x01,
+};
+
+/* WMI_GET_RF_STATUS_EVENTID */
+enum rf_status {
+ RF_OK = 0x00,
+ RF_NO_COMM = 0x01,
+ RF_WRONG_BOARD_FILE = 0x02,
+};
+
+/* WMI_GET_RF_STATUS_EVENTID */
+struct wmi_get_rf_status_event {
+ /* enum rf_type */
+ __le32 rf_type;
+ /* attached RFs bit vector */
+ __le32 attached_rf_vector;
+ /* enabled RFs bit vector */
+ __le32 enabled_rf_vector;
+ /* enum rf_status, refers to enabled RFs */
+ u8 rf_status[32];
+ /* enum board file RF type */
+ __le32 board_file_rf_type;
+ /* board file platform type */
+ __le32 board_file_platform_type;
+ /* board file version */
+ __le32 board_file_version;
+ __le32 reserved[2];
+} __packed;
+
+/* WMI_GET_BASEBAND_TYPE_EVENTID */
+enum baseband_type {
+ BASEBAND_UNKNOWN = 0x00,
+ BASEBAND_SPARROW_M_A0 = 0x03,
+ BASEBAND_SPARROW_M_A1 = 0x04,
+ BASEBAND_SPARROW_M_B0 = 0x05,
+ BASEBAND_SPARROW_M_C0 = 0x06,
+ BASEBAND_SPARROW_M_D0 = 0x07,
+};
+
+/* WMI_GET_BASEBAND_TYPE_EVENTID */
+struct wmi_get_baseband_type_event {
+ /* enum baseband_type */
+ __le32 baseband_type;
} __packed;
/* WMI_MAC_ADDR_RESP_EVENTID */
@@ -1410,4 +1521,375 @@ struct wmi_led_cfg_done_event {
__le32 status;
} __packed;
+#define WMI_NUM_MCS (13)
+
+/* Rate search parameters configuration per connection */
+struct wmi_rs_cfg {
+ /* The maximal allowed PER for each MCS
+ * MCS will be considered as failed if PER during RS is higher
+ */
+ u8 per_threshold[WMI_NUM_MCS];
+ /* Number of MPDUs for each MCS
+ * this is the minimal statistic required to make an educated
+ * decision
+ */
+ u8 min_frame_cnt[WMI_NUM_MCS];
+ /* stop threshold [0-100] */
+ u8 stop_th;
+ /* MCS1 stop threshold [0-100] */
+ u8 mcs1_fail_th;
+ u8 max_back_failure_th;
+ /* Debug feature for disabling internal RS trigger (which is
+ * currently triggered by BF Done)
+ */
+ u8 dbg_disable_internal_trigger;
+ __le32 back_failure_mask;
+ __le32 mcs_en_vec;
+} __packed;
+
+/* WMI_RS_CFG_CMDID */
+struct wmi_rs_cfg_cmd {
+ /* connection id */
+ u8 cid;
+ /* enable or disable rate search */
+ u8 rs_enable;
+ /* rate search configuration */
+ struct wmi_rs_cfg rs_cfg;
+} __packed;
+
+/* WMI_RS_CFG_DONE_EVENTID */
+struct wmi_rs_cfg_done_event {
+ u8 cid;
+ /* enum wmi_fw_status */
+ u8 status;
+ u8 reserved[2];
+} __packed;
+
+/* broadcast connection ID */
+#define WMI_LINK_MAINTAIN_CFG_CID_BROADCAST (0xFFFFFFFF)
+
+/* Types wmi_link_maintain_cfg presets for WMI_LINK_MAINTAIN_CFG_WRITE_CMD */
+enum wmi_link_maintain_cfg_type {
+ /* AP/PCP default normal (non-FST) configuration settings */
+ WMI_LINK_MAINTAIN_CFG_TYPE_DEFAULT_NORMAL_AP = 0x00,
+ /* AP/PCP default FST configuration settings */
+ WMI_LINK_MAINTAIN_CFG_TYPE_DEFAULT_FST_AP = 0x01,
+ /* STA default normal (non-FST) configuration settings */
+ WMI_LINK_MAINTAIN_CFG_TYPE_DEFAULT_NORMAL_STA = 0x02,
+ /* STA default FST configuration settings */
+ WMI_LINK_MAINTAIN_CFG_TYPE_DEFAULT_FST_STA = 0x03,
+ /* custom configuration settings */
+ WMI_LINK_MAINTAIN_CFG_TYPE_CUSTOM = 0x04,
+ /* number of defined configuration types */
+ WMI_LINK_MAINTAIN_CFG_TYPES_NUM = 0x05,
+};
+
+/* Response status codes for WMI_LINK_MAINTAIN_CFG_WRITE/READ commands */
+enum wmi_link_maintain_cfg_response_status {
+ /* WMI_LINK_MAINTAIN_CFG_WRITE/READ command successfully accomplished
+ */
+ WMI_LINK_MAINTAIN_CFG_RESPONSE_STATUS_OK = 0x00,
+ /* ERROR due to bad argument in WMI_LINK_MAINTAIN_CFG_WRITE/READ
+ * command request
+ */
+ WMI_LINK_MAINTAIN_CFG_RESPONSE_STATUS_BAD_ARGUMENT = 0x01,
+};
+
+/* Link Loss and Keep Alive configuration */
+struct wmi_link_maintain_cfg {
+ /* link_loss_enable_detectors_vec */
+ __le32 link_loss_enable_detectors_vec;
+ /* detectors check period usec */
+ __le32 check_link_loss_period_usec;
+ /* max allowed tx ageing */
+ __le32 tx_ageing_threshold_usec;
+ /* keep alive period for high SNR */
+ __le32 keep_alive_period_usec_high_snr;
+ /* keep alive period for low SNR */
+ __le32 keep_alive_period_usec_low_snr;
+ /* lower snr limit for keep alive period update */
+ __le32 keep_alive_snr_threshold_low_db;
+ /* upper snr limit for keep alive period update */
+ __le32 keep_alive_snr_threshold_high_db;
+ /* num of successive bad bcons causing link-loss */
+ __le32 bad_beacons_num_threshold;
+ /* SNR limit for bad_beacons_detector */
+ __le32 bad_beacons_snr_threshold_db;
+} __packed;
+
+/* WMI_LINK_MAINTAIN_CFG_WRITE_CMDID */
+struct wmi_link_maintain_cfg_write_cmd {
+ /* enum wmi_link_maintain_cfg_type_e - type of requested default
+ * configuration to be applied
+ */
+ __le32 cfg_type;
+ /* requested connection ID or WMI_LINK_MAINTAIN_CFG_CID_BROADCAST */
+ __le32 cid;
+ /* custom configuration settings to be applied (relevant only if
+ * cfg_type==WMI_LINK_MAINTAIN_CFG_TYPE_CUSTOM)
+ */
+ struct wmi_link_maintain_cfg lm_cfg;
+} __packed;
+
+/* WMI_LINK_MAINTAIN_CFG_READ_CMDID */
+struct wmi_link_maintain_cfg_read_cmd {
+ /* connection ID which configuration settings are requested */
+ __le32 cid;
+} __packed;
+
+/* WMI_LINK_MAINTAIN_CFG_WRITE_DONE_EVENTID */
+struct wmi_link_maintain_cfg_write_done_event {
+ /* requested connection ID */
+ __le32 cid;
+ /* wmi_link_maintain_cfg_response_status_e - write status */
+ __le32 status;
+} __packed;
+
+/* \WMI_LINK_MAINTAIN_CFG_READ_DONE_EVENT */
+struct wmi_link_maintain_cfg_read_done_event {
+ /* requested connection ID */
+ __le32 cid;
+ /* wmi_link_maintain_cfg_response_status_e - read status */
+ __le32 status;
+ /* Retrieved configuration settings */
+ struct wmi_link_maintain_cfg lm_cfg;
+} __packed;
+
+enum wmi_traffic_deferral_status {
+ WMI_TRAFFIC_DEFERRAL_APPROVED = 0x0,
+ WMI_TRAFFIC_DEFERRAL_REJECTED = 0x1,
+};
+
+/* WMI_TRAFFIC_DEFERRAL_EVENTID */
+struct wmi_traffic_deferral_event {
+ /* enum wmi_traffic_deferral_status_e */
+ u8 status;
+} __packed;
+
+enum wmi_traffic_resume_status {
+ WMI_TRAFFIC_RESUME_SUCCESS = 0x0,
+ WMI_TRAFFIC_RESUME_FAILED = 0x1,
+};
+
+/* WMI_TRAFFIC_RESUME_EVENTID */
+struct wmi_traffic_resume_event {
+ /* enum wmi_traffic_resume_status_e */
+ u8 status;
+} __packed;
+
+/* Power Save command completion status codes */
+enum wmi_ps_cfg_cmd_status {
+ WMI_PS_CFG_CMD_STATUS_SUCCESS = 0x00,
+ WMI_PS_CFG_CMD_STATUS_BAD_PARAM = 0x01,
+ /* other error */
+ WMI_PS_CFG_CMD_STATUS_ERROR = 0x02,
+};
+
+/* Device Power Save Profiles */
+enum wmi_ps_profile_type {
+ WMI_PS_PROFILE_TYPE_DEFAULT = 0x00,
+ WMI_PS_PROFILE_TYPE_PS_DISABLED = 0x01,
+ WMI_PS_PROFILE_TYPE_MAX_PS = 0x02,
+ WMI_PS_PROFILE_TYPE_LOW_LATENCY_PS = 0x03,
+};
+
+/* WMI_PS_DEV_PROFILE_CFG_CMDID
+ *
+ * Power save profile to be used by the device
+ *
+ * Returned event:
+ * - WMI_PS_DEV_PROFILE_CFG_EVENTID
+ */
+struct wmi_ps_dev_profile_cfg_cmd {
+ /* wmi_ps_profile_type_e */
+ u8 ps_profile;
+ u8 reserved[3];
+} __packed;
+
+/* WMI_PS_DEV_PROFILE_CFG_EVENTID */
+struct wmi_ps_dev_profile_cfg_event {
+ /* wmi_ps_cfg_cmd_status_e */
+ __le32 status;
+} __packed;
+
+enum wmi_ps_level {
+ WMI_PS_LEVEL_DEEP_SLEEP = 0x00,
+ WMI_PS_LEVEL_SHALLOW_SLEEP = 0x01,
+ /* awake = all PS mechanisms are disabled */
+ WMI_PS_LEVEL_AWAKE = 0x02,
+};
+
+enum wmi_ps_deep_sleep_clk_level {
+ /* 33k */
+ WMI_PS_DEEP_SLEEP_CLK_LEVEL_RTC = 0x00,
+ /* 10k */
+ WMI_PS_DEEP_SLEEP_CLK_LEVEL_OSC = 0x01,
+ /* @RTC Low latency */
+ WMI_PS_DEEP_SLEEP_CLK_LEVEL_RTC_LT = 0x02,
+ WMI_PS_DEEP_SLEEP_CLK_LEVEL_XTAL = 0x03,
+ WMI_PS_DEEP_SLEEP_CLK_LEVEL_SYSCLK = 0x04,
+ /* Not Applicable */
+ WMI_PS_DEEP_SLEEP_CLK_LEVEL_N_A = 0xFF,
+};
+
+/* Response by the FW to a D3 entry request */
+enum wmi_ps_d3_resp_policy {
+ WMI_PS_D3_RESP_POLICY_DEFAULT = 0x00,
+ /* debug -D3 req is always denied */
+ WMI_PS_D3_RESP_POLICY_DENIED = 0x01,
+ /* debug -D3 req is always approved */
+ WMI_PS_D3_RESP_POLICY_APPROVED = 0x02,
+};
+
+/* Device common power save configurations */
+struct wmi_ps_dev_cfg {
+ /* lowest level of PS allowed while unassociated, enum wmi_ps_level_e
+ */
+ u8 ps_unassoc_min_level;
+ /* lowest deep sleep clock level while nonassoc, enum
+ * wmi_ps_deep_sleep_clk_level_e
+ */
+ u8 ps_unassoc_deep_sleep_min_level;
+ /* lowest level of PS allowed while associated, enum wmi_ps_level_e */
+ u8 ps_assoc_min_level;
+ /* lowest deep sleep clock level while assoc, enum
+ * wmi_ps_deep_sleep_clk_level_e
+ */
+ u8 ps_assoc_deep_sleep_min_level;
+ /* enum wmi_ps_deep_sleep_clk_level_e */
+ u8 ps_assoc_low_latency_ds_min_level;
+ /* enum wmi_ps_d3_resp_policy_e */
+ u8 ps_D3_response_policy;
+ /* BOOL */
+ u8 ps_D3_pm_pme_enabled;
+ /* BOOL */
+ u8 ps_halp_enable;
+ u8 ps_deep_sleep_enter_thresh_msec;
+ /* BOOL */
+ u8 ps_voltage_scaling_en;
+} __packed;
+
+/* WMI_PS_DEV_CFG_CMDID
+ *
+ * Configure common Power Save parameters of the device and all MIDs.
+ *
+ * Returned event:
+ * - WMI_PS_DEV_CFG_EVENTID
+ */
+struct wmi_ps_dev_cfg_cmd {
+ /* Device Power Save configuration to be applied */
+ struct wmi_ps_dev_cfg ps_dev_cfg;
+ /* alignment to 32b */
+ u8 reserved[2];
+} __packed;
+
+/* WMI_PS_DEV_CFG_EVENTID */
+struct wmi_ps_dev_cfg_event {
+ /* wmi_ps_cfg_cmd_status_e */
+ __le32 status;
+} __packed;
+
+/* WMI_PS_DEV_CFG_READ_CMDID
+ *
+ * request to retrieve device Power Save configuration
+ * (WMI_PS_DEV_CFG_CMD params)
+ *
+ * Returned event:
+ * - WMI_PS_DEV_CFG_READ_EVENTID
+ */
+struct wmi_ps_dev_cfg_read_cmd {
+ __le32 reserved;
+} __packed;
+
+/* WMI_PS_DEV_CFG_READ_EVENTID */
+struct wmi_ps_dev_cfg_read_event {
+ /* wmi_ps_cfg_cmd_status_e */
+ __le32 status;
+ /* Retrieved device Power Save configuration (WMI_PS_DEV_CFG_CMD
+ * params)
+ */
+ struct wmi_ps_dev_cfg dev_ps_cfg;
+ /* alignment to 32b */
+ u8 reserved[2];
+} __packed;
+
+/* Per Mac Power Save configurations */
+struct wmi_ps_mid_cfg {
+ /* Low power RX in BTI is enabled, BOOL */
+ u8 beacon_lprx_enable;
+ /* Sync to sector ID enabled, BOOL */
+ u8 beacon_sync_to_sectorId_enable;
+ /* Low power RX in DTI is enabled, BOOL */
+ u8 frame_exchange_lprx_enable;
+ /* Sleep Cycle while in scheduled PS, 1-31 */
+ u8 scheduled_sleep_cycle_pow2;
+ /* Stay Awake for k BIs every (sleep_cycle - k) BIs, 1-31 */
+ u8 scheduled_num_of_awake_bis;
+ u8 am_to_traffic_load_thresh_mbp;
+ u8 traffic_to_am_load_thresh_mbps;
+ u8 traffic_to_am_num_of_no_traffic_bis;
+ /* BOOL */
+ u8 continuous_traffic_psm;
+ __le16 no_traffic_to_min_usec;
+ __le16 no_traffic_to_max_usec;
+ __le16 snoozing_sleep_interval_milisec;
+ u8 max_no_data_awake_events;
+ /* Trigger WEB after k failed beacons */
+ u8 num_of_failed_beacons_rx_to_trigger_web;
+ /* Trigger BF after k failed beacons */
+ u8 num_of_failed_beacons_rx_to_trigger_bf;
+ /* Trigger SOB after k successful beacons */
+ u8 num_of_successful_beacons_rx_to_trigger_sob;
+} __packed;
+
+/* WMI_PS_MID_CFG_CMDID
+ *
+ * Configure Power Save parameters of a specific MID.
+ * These parameters are relevant for the specific BSS this MID belongs to.
+ *
+ * Returned event:
+ * - WMI_PS_MID_CFG_EVENTID
+ */
+struct wmi_ps_mid_cfg_cmd {
+ /* MAC ID */
+ u8 mid;
+ /* mid PS configuration to be applied */
+ struct wmi_ps_mid_cfg ps_mid_cfg;
+} __packed;
+
+/* WMI_PS_MID_CFG_EVENTID */
+struct wmi_ps_mid_cfg_event {
+ /* MAC ID */
+ u8 mid;
+ /* alignment to 32b */
+ u8 reserved[3];
+ /* wmi_ps_cfg_cmd_status_e */
+ __le32 status;
+} __packed;
+
+/* WMI_PS_MID_CFG_READ_CMDID
+ *
+ * request to retrieve Power Save configuration of mid
+ * (WMI_PS_MID_CFG_CMD params)
+ *
+ * Returned event:
+ * - WMI_PS_MID_CFG_READ_EVENTID
+ */
+struct wmi_ps_mid_cfg_read_cmd {
+ /* MAC ID */
+ u8 mid;
+ /* alignment to 32b */
+ u8 reserved[3];
+} __packed;
+
+/* WMI_PS_MID_CFG_READ_EVENTID */
+struct wmi_ps_mid_cfg_read_event {
+ /* MAC ID */
+ u8 mid;
+ /* Retrieved MID Power Save configuration(WMI_PS_MID_CFG_CMD params) */
+ struct wmi_ps_mid_cfg mid_ps_cfg;
+ /* wmi_ps_cfg_cmd_status_e */
+ __le32 status;
+} __packed;
+
#endif /* __WILOCITY_WMI_H__ */
--
1.9.1
From: Lazar Alexei <[email protected]>
Stations disconnection is executed as part of wil_reset so no
need to do it in wil_down.
Removal of the disconnect operation will also preserve the lock
of wil->mutex during the whole reset flow and prevent handling of
connect event while resetting.
Set wil_status_resetting in earlier stage in the flow to prevent
double resetting call in case communication with FW fails while
bringing the interface down.
Signed-off-by: Lazar Alexei <[email protected]>
Signed-off-by: Maya Erez <[email protected]>
---
drivers/net/wireless/ath/wil6210/main.c | 16 ++--------------
1 file changed, 2 insertions(+), 14 deletions(-)
diff --git a/drivers/net/wireless/ath/wil6210/main.c b/drivers/net/wireless/ath/wil6210/main.c
index bbc54ee..dd0ee7f 100644
--- a/drivers/net/wireless/ath/wil6210/main.c
+++ b/drivers/net/wireless/ath/wil6210/main.c
@@ -1035,10 +1035,10 @@ int wil_up(struct wil6210_priv *wil)
int __wil_down(struct wil6210_priv *wil)
{
- int rc;
-
WARN_ON(!mutex_is_locked(&wil->mutex));
+ set_bit(wil_status_resetting, wil->status);
+
if (wil->platform_ops.bus_request)
wil->platform_ops.bus_request(wil->platform_handle, 0);
@@ -1064,18 +1064,6 @@ int __wil_down(struct wil6210_priv *wil)
wil->scan_request = NULL;
}
- if (test_bit(wil_status_fwconnected, wil->status) ||
- test_bit(wil_status_fwconnecting, wil->status)) {
-
- mutex_unlock(&wil->mutex);
- rc = wmi_call(wil, WMI_DISCONNECT_CMDID, NULL, 0,
- WMI_DISCONNECT_EVENTID, NULL, 0,
- WIL6210_DISCONNECT_TO_MS);
- mutex_lock(&wil->mutex);
- if (rc)
- wil_err(wil, "timeout waiting for disconnect\n");
- }
-
wil_reset(wil, false);
return 0;
--
1.9.1
From: Lior David <[email protected]>
Currently wiphy structure is initialized and registered
in wil_if_alloc, before some information is available such
as MAC address and capabilities. As a result there is a
small chance user space will get incorrect information
from calls such as NL80211_CMD_GET_WIPHY.
Fix this by seperating the registration and moving it
to wil_if_add which is executed later, after all
relevant information is known.
Signed-off-by: Lior David <[email protected]>
Signed-off-by: Maya Erez <[email protected]>
---
drivers/net/wireless/ath/wil6210/cfg80211.c | 7 -------
drivers/net/wireless/ath/wil6210/main.c | 3 +++
drivers/net/wireless/ath/wil6210/netdev.c | 32 +++++++++++++++++++++--------
3 files changed, 26 insertions(+), 16 deletions(-)
diff --git a/drivers/net/wireless/ath/wil6210/cfg80211.c b/drivers/net/wireless/ath/wil6210/cfg80211.c
index 310a385..ffacc76 100644
--- a/drivers/net/wireless/ath/wil6210/cfg80211.c
+++ b/drivers/net/wireless/ath/wil6210/cfg80211.c
@@ -1503,14 +1503,8 @@ struct wireless_dev *wil_cfg80211_init(struct device *dev)
set_wiphy_dev(wdev->wiphy, dev);
wil_wiphy_init(wdev->wiphy);
- rc = wiphy_register(wdev->wiphy);
- if (rc < 0)
- goto out_failed_reg;
-
return wdev;
-out_failed_reg:
- wiphy_free(wdev->wiphy);
out:
kfree(wdev);
@@ -1526,7 +1520,6 @@ void wil_wdev_free(struct wil6210_priv *wil)
if (!wdev)
return;
- wiphy_unregister(wdev->wiphy);
wiphy_free(wdev->wiphy);
kfree(wdev);
}
diff --git a/drivers/net/wireless/ath/wil6210/main.c b/drivers/net/wireless/ath/wil6210/main.c
index dd0ee7f..d0b180c 100644
--- a/drivers/net/wireless/ath/wil6210/main.c
+++ b/drivers/net/wireless/ath/wil6210/main.c
@@ -232,6 +232,9 @@ static void _wil6210_disconnect(struct wil6210_priv *wil, const u8 *bssid,
struct net_device *ndev = wil_to_ndev(wil);
struct wireless_dev *wdev = wil->wdev;
+ if (unlikely(!ndev))
+ return;
+
might_sleep();
wil_info(wil, "%s(bssid=%pM, reason=%d, ev%s)\n", __func__, bssid,
reason_code, from_event ? "+" : "-");
diff --git a/drivers/net/wireless/ath/wil6210/netdev.c b/drivers/net/wireless/ath/wil6210/netdev.c
index 0984097..4bc9bb0a 100644
--- a/drivers/net/wireless/ath/wil6210/netdev.c
+++ b/drivers/net/wireless/ath/wil6210/netdev.c
@@ -179,13 +179,6 @@ void *wil_if_alloc(struct device *dev)
SET_NETDEV_DEV(ndev, wiphy_dev(wdev->wiphy));
wdev->netdev = ndev;
- netif_napi_add(ndev, &wil->napi_rx, wil6210_netdev_poll_rx,
- WIL6210_NAPI_BUDGET);
- netif_tx_napi_add(ndev, &wil->napi_tx, wil6210_netdev_poll_tx,
- WIL6210_NAPI_BUDGET);
-
- netif_tx_stop_all_queues(ndev);
-
return wil;
out_priv:
@@ -216,25 +209,46 @@ void wil_if_free(struct wil6210_priv *wil)
int wil_if_add(struct wil6210_priv *wil)
{
+ struct wireless_dev *wdev = wil_to_wdev(wil);
+ struct wiphy *wiphy = wdev->wiphy;
struct net_device *ndev = wil_to_ndev(wil);
int rc;
- wil_dbg_misc(wil, "%s()\n", __func__);
+ wil_dbg_misc(wil, "entered");
+
+ rc = wiphy_register(wiphy);
+ if (rc < 0) {
+ wil_err(wil, "failed to register wiphy, err %d\n", rc);
+ return rc;
+ }
+
+ netif_napi_add(ndev, &wil->napi_rx, wil6210_netdev_poll_rx,
+ WIL6210_NAPI_BUDGET);
+ netif_tx_napi_add(ndev, &wil->napi_tx, wil6210_netdev_poll_tx,
+ WIL6210_NAPI_BUDGET);
+
+ netif_tx_stop_all_queues(ndev);
rc = register_netdev(ndev);
if (rc < 0) {
dev_err(&ndev->dev, "Failed to register netdev: %d\n", rc);
- return rc;
+ goto out_wiphy;
}
return 0;
+
+out_wiphy:
+ wiphy_unregister(wdev->wiphy);
+ return rc;
}
void wil_if_remove(struct wil6210_priv *wil)
{
struct net_device *ndev = wil_to_ndev(wil);
+ struct wireless_dev *wdev = wil_to_wdev(wil);
wil_dbg_misc(wil, "%s()\n", __func__);
unregister_netdev(ndev);
+ wiphy_unregister(wdev->wiphy);
}
--
1.9.1
From: Lior David <[email protected]>
Change the logging category of HALP functions from
MISC to IRQ, since the HALP mechanism is closely
related to interrupts. Both HALP and IRQ create
a heavy load of logging messages when enabled,
so their logging is typically disabled during normal debug
scenarios. Having them in the same logging category
will make it easier to disable logging for both in one go.
Signed-off-by: Lior David <[email protected]>
Signed-off-by: Maya Erez <[email protected]>
---
drivers/net/wireless/ath/wil6210/interrupt.c | 4 ++--
drivers/net/wireless/ath/wil6210/main.c | 26 +++++++++++++-------------
2 files changed, 15 insertions(+), 15 deletions(-)
diff --git a/drivers/net/wireless/ath/wil6210/interrupt.c b/drivers/net/wireless/ath/wil6210/interrupt.c
index f10c47d..64046e0 100644
--- a/drivers/net/wireless/ath/wil6210/interrupt.c
+++ b/drivers/net/wireless/ath/wil6210/interrupt.c
@@ -599,7 +599,7 @@ void wil6210_clear_irq(struct wil6210_priv *wil)
void wil6210_set_halp(struct wil6210_priv *wil)
{
- wil_dbg_misc(wil, "%s()\n", __func__);
+ wil_dbg_irq(wil, "%s()\n", __func__);
wil_w(wil, RGF_DMA_EP_MISC_ICR + offsetof(struct RGF_ICR, ICS),
BIT_DMA_EP_MISC_ICR_HALP);
@@ -607,7 +607,7 @@ void wil6210_set_halp(struct wil6210_priv *wil)
void wil6210_clear_halp(struct wil6210_priv *wil)
{
- wil_dbg_misc(wil, "%s()\n", __func__);
+ wil_dbg_irq(wil, "%s()\n", __func__);
wil_w(wil, RGF_DMA_EP_MISC_ICR + offsetof(struct RGF_ICR, ICR),
BIT_DMA_EP_MISC_ICR_HALP);
diff --git a/drivers/net/wireless/ath/wil6210/main.c b/drivers/net/wireless/ath/wil6210/main.c
index 4240e81..1205d76 100644
--- a/drivers/net/wireless/ath/wil6210/main.c
+++ b/drivers/net/wireless/ath/wil6210/main.c
@@ -1118,8 +1118,8 @@ void wil_halp_vote(struct wil6210_priv *wil)
mutex_lock(&wil->halp.lock);
- wil_dbg_misc(wil, "%s: start, HALP ref_cnt (%d)\n", __func__,
- wil->halp.ref_cnt);
+ wil_dbg_irq(wil, "%s: start, HALP ref_cnt (%d)\n", __func__,
+ wil->halp.ref_cnt);
if (++wil->halp.ref_cnt == 1) {
wil6210_set_halp(wil);
@@ -1129,15 +1129,15 @@ void wil_halp_vote(struct wil6210_priv *wil)
/* Mask HALP as done in case the interrupt is raised */
wil6210_mask_halp(wil);
} else {
- wil_dbg_misc(wil,
- "%s: HALP vote completed after %d ms\n",
- __func__,
- jiffies_to_msecs(to_jiffies - rc));
+ wil_dbg_irq(wil,
+ "%s: HALP vote completed after %d ms\n",
+ __func__,
+ jiffies_to_msecs(to_jiffies - rc));
}
}
- wil_dbg_misc(wil, "%s: end, HALP ref_cnt (%d)\n", __func__,
- wil->halp.ref_cnt);
+ wil_dbg_irq(wil, "%s: end, HALP ref_cnt (%d)\n", __func__,
+ wil->halp.ref_cnt);
mutex_unlock(&wil->halp.lock);
}
@@ -1148,16 +1148,16 @@ void wil_halp_unvote(struct wil6210_priv *wil)
mutex_lock(&wil->halp.lock);
- wil_dbg_misc(wil, "%s: start, HALP ref_cnt (%d)\n", __func__,
- wil->halp.ref_cnt);
+ wil_dbg_irq(wil, "%s: start, HALP ref_cnt (%d)\n", __func__,
+ wil->halp.ref_cnt);
if (--wil->halp.ref_cnt == 0) {
wil6210_clear_halp(wil);
- wil_dbg_misc(wil, "%s: HALP unvote\n", __func__);
+ wil_dbg_irq(wil, "%s: HALP unvote\n", __func__);
}
- wil_dbg_misc(wil, "%s: end, HALP ref_cnt (%d)\n", __func__,
- wil->halp.ref_cnt);
+ wil_dbg_irq(wil, "%s: end, HALP ref_cnt (%d)\n", __func__,
+ wil->halp.ref_cnt);
mutex_unlock(&wil->halp.lock);
}
--
1.9.1
In case HALP vote times out, we need to mask the HALP IRQ, as done
in case the interrupt is received, as this interrupt should be
set until completion of the low latency operation.
Signed-off-by: Maya Erez <[email protected]>
---
drivers/net/wireless/ath/wil6210/interrupt.c | 11 +++++++++--
drivers/net/wireless/ath/wil6210/main.c | 7 +++++--
drivers/net/wireless/ath/wil6210/wil6210.h | 1 +
3 files changed, 15 insertions(+), 4 deletions(-)
diff --git a/drivers/net/wireless/ath/wil6210/interrupt.c b/drivers/net/wireless/ath/wil6210/interrupt.c
index 011e741..f10c47d 100644
--- a/drivers/net/wireless/ath/wil6210/interrupt.c
+++ b/drivers/net/wireless/ath/wil6210/interrupt.c
@@ -1,5 +1,5 @@
/*
- * Copyright (c) 2012-2015 Qualcomm Atheros, Inc.
+ * Copyright (c) 2012-2016 Qualcomm Atheros, Inc.
*
* Permission to use, copy, modify, and/or distribute this software for any
* purpose with or without fee is hereby granted, provided that the above
@@ -101,7 +101,7 @@ static void wil6210_mask_irq_misc(struct wil6210_priv *wil, bool mask_halp)
mask_halp ? WIL6210_IRQ_DISABLE : WIL6210_IRQ_DISABLE_NO_HALP);
}
-static void wil6210_mask_halp(struct wil6210_priv *wil)
+void wil6210_mask_halp(struct wil6210_priv *wil)
{
wil_dbg_irq(wil, "%s()\n", __func__);
@@ -503,6 +503,13 @@ static int wil6210_debug_irq_mask(struct wil6210_priv *wil, u32 pseudo_cause)
offsetof(struct RGF_ICR, ICR));
u32 imv_misc = wil_r(wil, RGF_DMA_EP_MISC_ICR +
offsetof(struct RGF_ICR, IMV));
+
+ /* HALP interrupt can be unmasked when misc interrupts are
+ * masked
+ */
+ if (icr_misc & BIT_DMA_EP_MISC_ICR_HALP)
+ return 0;
+
wil_err(wil, "IRQ when it should be masked: pseudo 0x%08x\n"
"Rx icm:icr:imv 0x%08x 0x%08x 0x%08x\n"
"Tx icm:icr:imv 0x%08x 0x%08x 0x%08x\n"
diff --git a/drivers/net/wireless/ath/wil6210/main.c b/drivers/net/wireless/ath/wil6210/main.c
index 4bc92e5..4240e81 100644
--- a/drivers/net/wireless/ath/wil6210/main.c
+++ b/drivers/net/wireless/ath/wil6210/main.c
@@ -1124,13 +1124,16 @@ void wil_halp_vote(struct wil6210_priv *wil)
if (++wil->halp.ref_cnt == 1) {
wil6210_set_halp(wil);
rc = wait_for_completion_timeout(&wil->halp.comp, to_jiffies);
- if (!rc)
+ if (!rc) {
wil_err(wil, "%s: HALP vote timed out\n", __func__);
- else
+ /* Mask HALP as done in case the interrupt is raised */
+ wil6210_mask_halp(wil);
+ } else {
wil_dbg_misc(wil,
"%s: HALP vote completed after %d ms\n",
__func__,
jiffies_to_msecs(to_jiffies - rc));
+ }
}
wil_dbg_misc(wil, "%s: end, HALP ref_cnt (%d)\n", __func__,
diff --git a/drivers/net/wireless/ath/wil6210/wil6210.h b/drivers/net/wireless/ath/wil6210/wil6210.h
index ecab4af..9742446 100644
--- a/drivers/net/wireless/ath/wil6210/wil6210.h
+++ b/drivers/net/wireless/ath/wil6210/wil6210.h
@@ -828,6 +828,7 @@ void wil_unmask_irq(struct wil6210_priv *wil);
void wil_configure_interrupt_moderation(struct wil6210_priv *wil);
void wil_disable_irq(struct wil6210_priv *wil);
void wil_enable_irq(struct wil6210_priv *wil);
+void wil6210_mask_halp(struct wil6210_priv *wil);
/* P2P */
bool wil_p2p_is_social_scan(struct cfg80211_scan_request *request);
--
1.9.1
Maya Erez <[email protected]> wrote:
> Align to latest version of the auto generated wmi file
> describing the interface with FW.
>
> Signed-off-by: Maya Erez <[email protected]>
Thanks, 8 patches applied to ath-next branch of ath.git:
0163b0319900 wil6210: align to latest auto generated wmi.h
f1b7764f8626 wil6210: fix HALP handling in case of HALP vote time-out
74b6ac586d9c wil6210: support rx key setting for all TIDs
ef86f249fa49 wil6210: change HALP logging category to IRQ
d35c2b6f8ffa wil6210: fix stop p2p device handling
b0c0e688e523 wil6210: Fix driver down flow
dc90506f1458 wil6210: prevent usage of incorrect TX hwtail
2690c4c0e83b wil6210: fix wiphy registration sequence
--
Sent by pwcli
https://patchwork.kernel.org/patch/9259343/
txdata->enabled is used in order to determine if the TX vring
is valid. As the data transmit is handled in a different context,
in case txdata->enabled is set before vring->hwtail is updated,
an old or corrupted vring->hwtail can be used.
Protect setting of txdata->enabled and vring->hwtail to prevent a
case where TX vring start handling TX packets before setting
vring->hwtail.
Signed-off-by: Maya Erez <[email protected]>
---
drivers/net/wireless/ath/wil6210/txrx.c | 9 +++++++--
1 file changed, 7 insertions(+), 2 deletions(-)
diff --git a/drivers/net/wireless/ath/wil6210/txrx.c b/drivers/net/wireless/ath/wil6210/txrx.c
index f2f6a40..4c38520 100644
--- a/drivers/net/wireless/ath/wil6210/txrx.c
+++ b/drivers/net/wireless/ath/wil6210/txrx.c
@@ -873,9 +873,12 @@ int wil_vring_init_tx(struct wil6210_priv *wil, int id, int size,
rc = -EINVAL;
goto out_free;
}
- vring->hwtail = le32_to_cpu(reply.cmd.tx_vring_tail_ptr);
+ spin_lock_bh(&txdata->lock);
+ vring->hwtail = le32_to_cpu(reply.cmd.tx_vring_tail_ptr);
txdata->enabled = 1;
+ spin_unlock_bh(&txdata->lock);
+
if (txdata->dot1x_open && (agg_wsize >= 0))
wil_addba_tx_request(wil, id, agg_wsize);
@@ -950,9 +953,11 @@ int wil_vring_init_bcast(struct wil6210_priv *wil, int id, int size)
rc = -EINVAL;
goto out_free;
}
- vring->hwtail = le32_to_cpu(reply.cmd.tx_vring_tail_ptr);
+ spin_lock_bh(&txdata->lock);
+ vring->hwtail = le32_to_cpu(reply.cmd.tx_vring_tail_ptr);
txdata->enabled = 1;
+ spin_unlock_bh(&txdata->lock);
return 0;
out_free:
--
1.9.1