Correct mac timiing settings for different hardware generations.
This improves 40-60Mbps performance.
Fixes: 9aac2969fe5f ("mt76: mt7915: update mac timing settings")
Reported-By: Carson Vandegriffe <[email protected]>
Tested-by: Chad Monroe <[email protected]>
Signed-off-by: Ryder Lee <[email protected]>
---
drivers/net/wireless/mediatek/mt76/mt7915/mac.c | 17 +++++++++++++----
1 file changed, 13 insertions(+), 4 deletions(-)
diff --git a/drivers/net/wireless/mediatek/mt76/mt7915/mac.c b/drivers/net/wireless/mediatek/mt76/mt7915/mac.c
index be97dede2634..09f0fab7c958 100644
--- a/drivers/net/wireless/mediatek/mt76/mt7915/mac.c
+++ b/drivers/net/wireless/mediatek/mt76/mt7915/mac.c
@@ -1149,7 +1149,7 @@ void mt7915_mac_set_timing(struct mt7915_phy *phy)
FIELD_PREP(MT_TIMEOUT_VAL_CCA, 48);
u32 ofdm = FIELD_PREP(MT_TIMEOUT_VAL_PLCP, 60) |
FIELD_PREP(MT_TIMEOUT_VAL_CCA, 28);
- int offset;
+ int eifs_ofdm = 360, sifs = 10, offset;
bool a_band = !(phy->mt76->chandef.chan->band == NL80211_BAND_2GHZ);
if (!test_bit(MT76_STATE_RUNNING, &phy->mt76->state))
@@ -1167,6 +1167,18 @@ void mt7915_mac_set_timing(struct mt7915_phy *phy)
reg_offset = FIELD_PREP(MT_TIMEOUT_VAL_PLCP, offset) |
FIELD_PREP(MT_TIMEOUT_VAL_CCA, offset);
+ if (!is_mt7915(&dev->mt76)) {
+ if (!a_band) {
+ mt76_wr(dev, MT_TMAC_ICR1(phy->band_idx),
+ FIELD_PREP(MT_IFS_EIFS_CCK, 314));
+ eifs_ofdm = 78;
+ } else {
+ eifs_ofdm = 84;
+ }
+ } else if (a_band) {
+ sifs = 16;
+ }
+
mt76_wr(dev, MT_TMAC_CDTR(phy->band_idx), cck + reg_offset);
mt76_wr(dev, MT_TMAC_ODTR(phy->band_idx), ofdm + reg_offset);
mt76_wr(dev, MT_TMAC_ICR0(phy->band_idx),
@@ -1175,9 +1187,6 @@ void mt7915_mac_set_timing(struct mt7915_phy *phy)
FIELD_PREP(MT_IFS_SIFS, 10) |
FIELD_PREP(MT_IFS_SLOT, phy->slottime));
- mt76_wr(dev, MT_TMAC_ICR1(phy->band_idx),
- FIELD_PREP(MT_IFS_EIFS_CCK, 314));
-
if (phy->slottime < 20 || a_band)
val = MT7915_CFEND_RATE_DEFAULT;
else
--
2.36.1