>=20
> > Subject: Re: [v5] wlcore: add missing nvs file name info for wilink8
> >
> > * Reizer, Eyal <[email protected]> [170807 00:47]:
> > > Hi Tony,
> > > >
> > > > * Reizer, Eyal <[email protected]> [170807 00:32]:
> > > > > The following commits:
> > > > > c815fde wlcore: spi: Populate config firmware data
> > > > > d776fc8 wlcore: sdio: Populate config firmware data
> > > > >
> > > > > Populated the nvs entry for wilink6 and wilink7 only while it is
> > > > > still needed for wilink8 as well.
> > > > > This broke user space backward compatibility when upgrading from
> > older
> > > > > kernels, as the alternate mac address would not be read from the =
nvs
> > that
> > > > is
> > > > > present in the file system (lib/firmware/ti-connectivity/wl1271-
> nvs.bin)
> > > > > causing mac address change of the wlan interface.
> > > > >
> > > > > This patch fix this and update the structure field with the same
> default
> > > > > nvs file name that has been used before.
> > > > >
> > > > > In addition, some distros hold a default wl1271-nvs.bin in the fi=
le
> > > > > system with a bogus mac address (deadbeef...) that for a wl18xx
> device
> > > > > also overrides the mac address that is stored inside the device.
> > > > > Warn users about this bogus mac address and use a random mac
> > instead
> > > >
> > > > Hmm looks pretty good to me except for one more thing I just notice=
d.
> > > >
> > > > Why don't you just use the hardware mac address instead of a random
> > > > mac address on wl18xx device when you see a bogus nvs file?
> > > >
> > >
> > > I agree that this would have been better but the problem is that
> hardware
> > > mac address is available for wilink8 onlyWilink6/7 don't have one sto=
red.
> > > The wlcore code responsible for handling mac address is common code
> > > and there is method for detecting between them in this module.
> >
> > Care to clarify a bit.. Are you saying wilink8 will use the hardware
> > mac address in case of bogus nvs file?
> >
> With present implementation it will not. It will use the random one for b=
oth
> wilink6/7 as well as wilink8.
> I need to get a hold of a wilink6/7 module and see if reverting to an int=
ernal
> mac address is working. Will try to look around as it has been a while si=
nce
> I used one.
>=20
Managed to test with a wilink6 module and in fact reading hardware mac
Address from fuse is working ok for wilink6/7 as well.
submitting v6 using this mac address instead of a random one when the=20
bogus (deadbeef...) mac address is read from default nvs file.
Best Regards,
Eyal
* Reizer, Eyal <[email protected]> [170809 00:26]:
> Managed to test with a wilink6 module and in fact reading hardware mac
> Address from fuse is working ok for wilink6/7 as well.
> submitting v6 using this mac address instead of a random one when the
> bogus (deadbeef...) mac address is read from default nvs file.
Hey great, that should help clear quite a bit of the wl12xx confusion
with distros! Thanks for doing that.
Regards,
Tony