This patch series adds 6GHz frequency listing in ath11k driver and mac80211
registration for the 6GHz band. Also, extends some of wmi command tlvs for
supporting 6GHz.
changes in v5:
- latest 6ghz patches on mac80211 expects driver not to pass ht/vht
caps for 6GHZ band at device registration. so fix that.
changes in v4:
- drop helper function to identify psc channel as different version is
already merged.
changes in v3:
- cfg80211: remove PSC channel flag and instead add helper function.
- Address differences in 6GHZ frequencies between IEEE P802.11ax/D6.0
and IEEE P802.11ax/D6.1
changes in v2:
- Fixed ath11k_phymode to be set in 6GHZ band
Pradeep Kumar Chitrapu (8):
ath11k: add 6G frequency list supported by driver
ath11k: add support for 6GHz radio in driver
ath11k: Use freq instead of channel number in rx path
ath11k: extend peer_assoc_cmd for 6GHz band
ath11k: set psc channel flag when sending channel list to firmware.
ath11k: Add 6G scan dwell time parameter in scan request command
ath11k: Send multiple scan_chan_list messages if required
ath11k: Add support for 6g scan hint
drivers/net/wireless/ath/ath11k/core.h | 6 +-
drivers/net/wireless/ath/ath11k/dp_rx.c | 6 +-
drivers/net/wireless/ath/ath11k/mac.c | 164 +++++++++++++--
drivers/net/wireless/ath/ath11k/reg.c | 4 +
drivers/net/wireless/ath/ath11k/wmi.c | 269 +++++++++++++++++-------
drivers/net/wireless/ath/ath11k/wmi.h | 40 +++-
6 files changed, 390 insertions(+), 99 deletions(-)
--
2.17.1
Pradeep Kumar Chitrapu <[email protected]> writes:
> This patch series adds 6GHz frequency listing in ath11k driver and mac80211
> registration for the 6GHz band. Also, extends some of wmi command tlvs for
> supporting 6GHz.
>
> changes in v5:
> - latest 6ghz patches on mac80211 expects driver not to pass ht/vht
> caps for 6GHZ band at device registration. so fix that.
What are the dependencies for this patch? Is everything that is in
mac80211-next as of today enough?
Also what I do with Rajkumar's patch:
[PATCH] ath11k: build HE 6 GHz capability
Should I apply it before or after this patchset?
--
https://wireless.wiki.kernel.org/en/developers/documentation/submittingpatches
On 2020-06-03 06:12, Kalle Valo wrote:
> Pradeep Kumar Chitrapu <[email protected]> writes:
>
>> This patch series adds 6GHz frequency listing in ath11k driver and
>> mac80211
>> registration for the 6GHz band. Also, extends some of wmi command tlvs
>> for
>> supporting 6GHz.
>>
>> changes in v5:
>> - latest 6ghz patches on mac80211 expects driver not to pass ht/vht
>> caps for 6GHZ band at device registration. so fix that.
>
> What are the dependencies for this patch? Is everything that is in
> mac80211-next as of today enough?
Yes Kalle. current mac80211-next is enough.
>
> Also what I do with Rajkumar's patch:
>
> [PATCH] ath11k: build HE 6 GHz capability
>
> Should I apply it before or after this patchset?
Although there is no compile dependency with above patchset,
there will be 6ghz functionality dependency with above. So, IMO, its
better
to apply after this patch set.
Thanks
Pradeep
Pradeep Kumar Chitrapu <[email protected]> writes:
> On 2020-06-03 06:12, Kalle Valo wrote:
>> Pradeep Kumar Chitrapu <[email protected]> writes:
>>
>>> This patch series adds 6GHz frequency listing in ath11k driver and
>>> mac80211
>>> registration for the 6GHz band. Also, extends some of wmi command
>>> tlvs for
>>> supporting 6GHz.
>>>
>>> changes in v5:
>>> - latest 6ghz patches on mac80211 expects driver not to pass ht/vht
>>> caps for 6GHZ band at device registration. so fix that.
>>
>> What are the dependencies for this patch? Is everything that is in
>> mac80211-next as of today enough?
>
> Yes Kalle. current mac80211-next is enough.
>
>>
>> Also what I do with Rajkumar's patch:
>>
>> [PATCH] ath11k: build HE 6 GHz capability
>>
>> Should I apply it before or after this patchset?
>
> Although there is no compile dependency with above patchset, there
> will be 6ghz functionality dependency with above. So, IMO, its better
> to apply after this patch set.
Ok, thanks.
--
https://wireless.wiki.kernel.org/en/developers/documentation/submittingpatches