Indicate spectrum management support in hardware
flags, while we already handle power set
(IEEE80211_CONF_CHANGE_POWER) in the ath10k driver.
This enable 802.11h support for station mode.
Signed-off-by: Janusz Dziedzic <[email protected]>
---
drivers/net/wireless/ath/ath10k/mac.c | 3 ++-
1 file changed, 2 insertions(+), 1 deletion(-)
diff --git a/drivers/net/wireless/ath/ath10k/mac.c b/drivers/net/wireless/ath/ath10k/mac.c
index 1e0308f..78fc4f5 100644
--- a/drivers/net/wireless/ath/ath10k/mac.c
+++ b/drivers/net/wireless/ath/ath10k/mac.c
@@ -4235,7 +4235,8 @@ int ath10k_mac_register(struct ath10k *ar)
IEEE80211_HW_HAS_RATE_CONTROL |
IEEE80211_HW_SUPPORTS_STATIC_SMPS |
IEEE80211_HW_WANT_MONITOR_VIF |
- IEEE80211_HW_AP_LINK_PS;
+ IEEE80211_HW_AP_LINK_PS |
+ IEEE80211_HW_SPECTRUM_MGMT;
/* MSDU can have HTT TX fragment pushed in front. The additional 4
* bytes is used for padding/alignment if necessary. */
--
1.7.9.5
Janusz Dziedzic <[email protected]> writes:
> Indicate spectrum management support in hardware
> flags, while we already handle power set
> (IEEE80211_CONF_CHANGE_POWER) in the ath10k driver.
> This enable 802.11h support for station mode.
>
> Signed-off-by: Janusz Dziedzic <[email protected]>
Thanks, applied.
--
Kalle Valo