The file 'rsi_91x_hal.c' is going to contain device specific
code like firmware loading etc. As the file 'rsi_91x_pkt.c'
contains code for preparing device (frimware understandable)
specific descriptors for the transmit frames, it is moved to
'rsi_91x_hal.c'
Signed-off-by: Prameela Rani Garnepudi <[email protected]>
---
drivers/net/wireless/rsi/Makefile | 2 +-
drivers/net/wireless/rsi/rsi_91x_hal.c | 215 +++++++++++++++++++++++++++++++++
drivers/net/wireless/rsi/rsi_91x_pkt.c | 215 ---------------------------------
3 files changed, 216 insertions(+), 216 deletions(-)
create mode 100644 drivers/net/wireless/rsi/rsi_91x_hal.c
delete mode 100644 drivers/net/wireless/rsi/rsi_91x_pkt.c
diff --git a/drivers/net/wireless/rsi/Makefile b/drivers/net/wireless/rsi/Makefile
index 25828b6..a475c81 100644
--- a/drivers/net/wireless/rsi/Makefile
+++ b/drivers/net/wireless/rsi/Makefile
@@ -2,7 +2,7 @@ rsi_91x-y += rsi_91x_main.o
rsi_91x-y += rsi_91x_core.o
rsi_91x-y += rsi_91x_mac80211.o
rsi_91x-y += rsi_91x_mgmt.o
-rsi_91x-y += rsi_91x_pkt.o
+rsi_91x-y += rsi_91x_hal.o
rsi_91x-$(CONFIG_RSI_DEBUGFS) += rsi_91x_debugfs.o
rsi_usb-y += rsi_91x_usb.o rsi_91x_usb_ops.o
diff --git a/drivers/net/wireless/rsi/rsi_91x_hal.c b/drivers/net/wireless/rsi/rsi_91x_hal.c
new file mode 100644
index 0000000..02920c9
--- /dev/null
+++ b/drivers/net/wireless/rsi/rsi_91x_hal.c
@@ -0,0 +1,215 @@
+/**
+ * Copyright (c) 2014 Redpine Signals Inc.
+ *
+ * Permission to use, copy, modify, and/or distribute this software for any
+ * purpose with or without fee is hereby granted, provided that the above
+ * copyright notice and this permission notice appear in all copies.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES
+ * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF
+ * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR
+ * ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES
+ * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN
+ * ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF
+ * OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
+ */
+
+#include "rsi_mgmt.h"
+
+/**
+ * rsi_send_data_pkt() - This function sends the recieved data packet from
+ * driver to device.
+ * @common: Pointer to the driver private structure.
+ * @skb: Pointer to the socket buffer structure.
+ *
+ * Return: status: 0 on success, -1 on failure.
+ */
+int rsi_send_data_pkt(struct rsi_common *common, struct sk_buff *skb)
+{
+ struct rsi_hw *adapter = common->priv;
+ struct ieee80211_hdr *tmp_hdr;
+ struct ieee80211_tx_info *info;
+ struct skb_info *tx_params;
+ struct ieee80211_bss_conf *bss;
+ int status;
+ u8 ieee80211_size = MIN_802_11_HDR_LEN;
+ u8 extnd_size;
+ __le16 *frame_desc;
+ u16 seq_num;
+
+ info = IEEE80211_SKB_CB(skb);
+ bss = &info->control.vif->bss_conf;
+ tx_params = (struct skb_info *)info->driver_data;
+
+ if (!bss->assoc) {
+ status = -EINVAL;
+ goto err;
+ }
+
+ tmp_hdr = (struct ieee80211_hdr *)&skb->data[0];
+ seq_num = (le16_to_cpu(tmp_hdr->seq_ctrl) >> 4);
+
+ extnd_size = ((uintptr_t)skb->data & 0x3);
+
+ if ((FRAME_DESC_SZ + extnd_size) > skb_headroom(skb)) {
+ rsi_dbg(ERR_ZONE, "%s: Unable to send pkt\n", __func__);
+ status = -ENOSPC;
+ goto err;
+ }
+
+ skb_push(skb, (FRAME_DESC_SZ + extnd_size));
+ frame_desc = (__le16 *)&skb->data[0];
+ memset((u8 *)frame_desc, 0, FRAME_DESC_SZ);
+
+ if (ieee80211_is_data_qos(tmp_hdr->frame_control)) {
+ ieee80211_size += 2;
+ frame_desc[6] |= cpu_to_le16(BIT(12));
+ }
+
+ if ((!(info->flags & IEEE80211_TX_INTFL_DONT_ENCRYPT)) &&
+ (common->secinfo.security_enable)) {
+ if (rsi_is_cipher_wep(common))
+ ieee80211_size += 4;
+ else
+ ieee80211_size += 8;
+ frame_desc[6] |= cpu_to_le16(BIT(15));
+ }
+
+ frame_desc[0] = cpu_to_le16((skb->len - FRAME_DESC_SZ) |
+ (RSI_WIFI_DATA_Q << 12));
+ frame_desc[2] = cpu_to_le16((extnd_size) | (ieee80211_size) << 8);
+
+ if (common->min_rate != 0xffff) {
+ /* Send fixed rate */
+ frame_desc[3] = cpu_to_le16(RATE_INFO_ENABLE);
+ frame_desc[4] = cpu_to_le16(common->min_rate);
+
+ if (conf_is_ht40(&common->priv->hw->conf))
+ frame_desc[5] = cpu_to_le16(FULL40M_ENABLE);
+
+ if (common->vif_info[0].sgi) {
+ if (common->min_rate & 0x100) /* Only MCS rates */
+ frame_desc[4] |=
+ cpu_to_le16(ENABLE_SHORTGI_RATE);
+ }
+
+ }
+
+ frame_desc[6] |= cpu_to_le16(seq_num & 0xfff);
+ frame_desc[7] = cpu_to_le16(((tx_params->tid & 0xf) << 4) |
+ (skb->priority & 0xf) |
+ (tx_params->sta_id << 8));
+
+ status = adapter->host_intf_write_pkt(common->priv,
+ skb->data,
+ skb->len);
+ if (status)
+ rsi_dbg(ERR_ZONE, "%s: Failed to write pkt\n",
+ __func__);
+
+err:
+ ++common->tx_stats.total_tx_pkt_freed[skb->priority];
+ rsi_indicate_tx_status(common->priv, skb, status);
+ return status;
+}
+
+/**
+ * rsi_send_mgmt_pkt() - This functions sends the received management packet
+ * from driver to device.
+ * @common: Pointer to the driver private structure.
+ * @skb: Pointer to the socket buffer structure.
+ *
+ * Return: status: 0 on success, -1 on failure.
+ */
+int rsi_send_mgmt_pkt(struct rsi_common *common,
+ struct sk_buff *skb)
+{
+ struct rsi_hw *adapter = common->priv;
+ struct ieee80211_hdr *wh;
+ struct ieee80211_tx_info *info;
+ struct ieee80211_bss_conf *bss;
+ struct ieee80211_hw *hw = adapter->hw;
+ struct ieee80211_conf *conf = &hw->conf;
+ struct skb_info *tx_params;
+ int status = -E2BIG;
+ __le16 *msg;
+ u8 extnd_size;
+ u8 vap_id = 0;
+
+ info = IEEE80211_SKB_CB(skb);
+ tx_params = (struct skb_info *)info->driver_data;
+ extnd_size = ((uintptr_t)skb->data & 0x3);
+
+ if (tx_params->flags & INTERNAL_MGMT_PKT) {
+ if ((extnd_size) > skb_headroom(skb)) {
+ rsi_dbg(ERR_ZONE, "%s: Unable to send pkt\n", __func__);
+ dev_kfree_skb(skb);
+ return -ENOSPC;
+ }
+ skb_push(skb, extnd_size);
+ skb->data[extnd_size + 4] = extnd_size;
+ status = adapter->host_intf_write_pkt(common->priv,
+ (u8 *)skb->data,
+ skb->len);
+ if (status) {
+ rsi_dbg(ERR_ZONE,
+ "%s: Failed to write the packet\n", __func__);
+ }
+ dev_kfree_skb(skb);
+ return status;
+ }
+
+ bss = &info->control.vif->bss_conf;
+ wh = (struct ieee80211_hdr *)&skb->data[0];
+
+ if (FRAME_DESC_SZ > skb_headroom(skb))
+ goto err;
+
+ skb_push(skb, FRAME_DESC_SZ);
+ memset(skb->data, 0, FRAME_DESC_SZ);
+ msg = (__le16 *)skb->data;
+
+ if (skb->len > MAX_MGMT_PKT_SIZE) {
+ rsi_dbg(INFO_ZONE, "%s: Dropping mgmt pkt > 512\n", __func__);
+ goto err;
+ }
+
+ msg[0] = cpu_to_le16((skb->len - FRAME_DESC_SZ) |
+ (RSI_WIFI_MGMT_Q << 12));
+ msg[1] = cpu_to_le16(TX_DOT11_MGMT);
+ msg[2] = cpu_to_le16(MIN_802_11_HDR_LEN << 8);
+ msg[3] = cpu_to_le16(RATE_INFO_ENABLE);
+ msg[6] = cpu_to_le16(le16_to_cpu(wh->seq_ctrl) >> 4);
+
+ if (wh->addr1[0] & BIT(0))
+ msg[3] |= cpu_to_le16(RSI_BROADCAST_PKT);
+
+ if (common->band == NL80211_BAND_2GHZ)
+ msg[4] = cpu_to_le16(RSI_11B_MODE);
+ else
+ msg[4] = cpu_to_le16((RSI_RATE_6 & 0x0f) | RSI_11G_MODE);
+
+ if (conf_is_ht40(conf)) {
+ msg[4] = cpu_to_le16(0xB | RSI_11G_MODE);
+ msg[5] = cpu_to_le16(0x6);
+ }
+
+ /* Indicate to firmware to give cfm */
+ if ((skb->data[16] == IEEE80211_STYPE_PROBE_REQ) && (!bss->assoc)) {
+ msg[1] |= cpu_to_le16(BIT(10));
+ msg[7] = cpu_to_le16(PROBEREQ_CONFIRM);
+ common->mgmt_q_block = true;
+ }
+
+ msg[7] |= cpu_to_le16(vap_id << 8);
+
+ status = adapter->host_intf_write_pkt(common->priv,
+ (u8 *)msg,
+ skb->len);
+ if (status)
+ rsi_dbg(ERR_ZONE, "%s: Failed to write the packet\n", __func__);
+
+err:
+ rsi_indicate_tx_status(common->priv, skb, status);
+ return status;
+}
diff --git a/drivers/net/wireless/rsi/rsi_91x_pkt.c b/drivers/net/wireless/rsi/rsi_91x_pkt.c
deleted file mode 100644
index 02920c9..0000000
--- a/drivers/net/wireless/rsi/rsi_91x_pkt.c
+++ /dev/null
@@ -1,215 +0,0 @@
-/**
- * Copyright (c) 2014 Redpine Signals Inc.
- *
- * Permission to use, copy, modify, and/or distribute this software for any
- * purpose with or without fee is hereby granted, provided that the above
- * copyright notice and this permission notice appear in all copies.
- *
- * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES
- * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF
- * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR
- * ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES
- * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN
- * ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF
- * OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
- */
-
-#include "rsi_mgmt.h"
-
-/**
- * rsi_send_data_pkt() - This function sends the recieved data packet from
- * driver to device.
- * @common: Pointer to the driver private structure.
- * @skb: Pointer to the socket buffer structure.
- *
- * Return: status: 0 on success, -1 on failure.
- */
-int rsi_send_data_pkt(struct rsi_common *common, struct sk_buff *skb)
-{
- struct rsi_hw *adapter = common->priv;
- struct ieee80211_hdr *tmp_hdr;
- struct ieee80211_tx_info *info;
- struct skb_info *tx_params;
- struct ieee80211_bss_conf *bss;
- int status;
- u8 ieee80211_size = MIN_802_11_HDR_LEN;
- u8 extnd_size;
- __le16 *frame_desc;
- u16 seq_num;
-
- info = IEEE80211_SKB_CB(skb);
- bss = &info->control.vif->bss_conf;
- tx_params = (struct skb_info *)info->driver_data;
-
- if (!bss->assoc) {
- status = -EINVAL;
- goto err;
- }
-
- tmp_hdr = (struct ieee80211_hdr *)&skb->data[0];
- seq_num = (le16_to_cpu(tmp_hdr->seq_ctrl) >> 4);
-
- extnd_size = ((uintptr_t)skb->data & 0x3);
-
- if ((FRAME_DESC_SZ + extnd_size) > skb_headroom(skb)) {
- rsi_dbg(ERR_ZONE, "%s: Unable to send pkt\n", __func__);
- status = -ENOSPC;
- goto err;
- }
-
- skb_push(skb, (FRAME_DESC_SZ + extnd_size));
- frame_desc = (__le16 *)&skb->data[0];
- memset((u8 *)frame_desc, 0, FRAME_DESC_SZ);
-
- if (ieee80211_is_data_qos(tmp_hdr->frame_control)) {
- ieee80211_size += 2;
- frame_desc[6] |= cpu_to_le16(BIT(12));
- }
-
- if ((!(info->flags & IEEE80211_TX_INTFL_DONT_ENCRYPT)) &&
- (common->secinfo.security_enable)) {
- if (rsi_is_cipher_wep(common))
- ieee80211_size += 4;
- else
- ieee80211_size += 8;
- frame_desc[6] |= cpu_to_le16(BIT(15));
- }
-
- frame_desc[0] = cpu_to_le16((skb->len - FRAME_DESC_SZ) |
- (RSI_WIFI_DATA_Q << 12));
- frame_desc[2] = cpu_to_le16((extnd_size) | (ieee80211_size) << 8);
-
- if (common->min_rate != 0xffff) {
- /* Send fixed rate */
- frame_desc[3] = cpu_to_le16(RATE_INFO_ENABLE);
- frame_desc[4] = cpu_to_le16(common->min_rate);
-
- if (conf_is_ht40(&common->priv->hw->conf))
- frame_desc[5] = cpu_to_le16(FULL40M_ENABLE);
-
- if (common->vif_info[0].sgi) {
- if (common->min_rate & 0x100) /* Only MCS rates */
- frame_desc[4] |=
- cpu_to_le16(ENABLE_SHORTGI_RATE);
- }
-
- }
-
- frame_desc[6] |= cpu_to_le16(seq_num & 0xfff);
- frame_desc[7] = cpu_to_le16(((tx_params->tid & 0xf) << 4) |
- (skb->priority & 0xf) |
- (tx_params->sta_id << 8));
-
- status = adapter->host_intf_write_pkt(common->priv,
- skb->data,
- skb->len);
- if (status)
- rsi_dbg(ERR_ZONE, "%s: Failed to write pkt\n",
- __func__);
-
-err:
- ++common->tx_stats.total_tx_pkt_freed[skb->priority];
- rsi_indicate_tx_status(common->priv, skb, status);
- return status;
-}
-
-/**
- * rsi_send_mgmt_pkt() - This functions sends the received management packet
- * from driver to device.
- * @common: Pointer to the driver private structure.
- * @skb: Pointer to the socket buffer structure.
- *
- * Return: status: 0 on success, -1 on failure.
- */
-int rsi_send_mgmt_pkt(struct rsi_common *common,
- struct sk_buff *skb)
-{
- struct rsi_hw *adapter = common->priv;
- struct ieee80211_hdr *wh;
- struct ieee80211_tx_info *info;
- struct ieee80211_bss_conf *bss;
- struct ieee80211_hw *hw = adapter->hw;
- struct ieee80211_conf *conf = &hw->conf;
- struct skb_info *tx_params;
- int status = -E2BIG;
- __le16 *msg;
- u8 extnd_size;
- u8 vap_id = 0;
-
- info = IEEE80211_SKB_CB(skb);
- tx_params = (struct skb_info *)info->driver_data;
- extnd_size = ((uintptr_t)skb->data & 0x3);
-
- if (tx_params->flags & INTERNAL_MGMT_PKT) {
- if ((extnd_size) > skb_headroom(skb)) {
- rsi_dbg(ERR_ZONE, "%s: Unable to send pkt\n", __func__);
- dev_kfree_skb(skb);
- return -ENOSPC;
- }
- skb_push(skb, extnd_size);
- skb->data[extnd_size + 4] = extnd_size;
- status = adapter->host_intf_write_pkt(common->priv,
- (u8 *)skb->data,
- skb->len);
- if (status) {
- rsi_dbg(ERR_ZONE,
- "%s: Failed to write the packet\n", __func__);
- }
- dev_kfree_skb(skb);
- return status;
- }
-
- bss = &info->control.vif->bss_conf;
- wh = (struct ieee80211_hdr *)&skb->data[0];
-
- if (FRAME_DESC_SZ > skb_headroom(skb))
- goto err;
-
- skb_push(skb, FRAME_DESC_SZ);
- memset(skb->data, 0, FRAME_DESC_SZ);
- msg = (__le16 *)skb->data;
-
- if (skb->len > MAX_MGMT_PKT_SIZE) {
- rsi_dbg(INFO_ZONE, "%s: Dropping mgmt pkt > 512\n", __func__);
- goto err;
- }
-
- msg[0] = cpu_to_le16((skb->len - FRAME_DESC_SZ) |
- (RSI_WIFI_MGMT_Q << 12));
- msg[1] = cpu_to_le16(TX_DOT11_MGMT);
- msg[2] = cpu_to_le16(MIN_802_11_HDR_LEN << 8);
- msg[3] = cpu_to_le16(RATE_INFO_ENABLE);
- msg[6] = cpu_to_le16(le16_to_cpu(wh->seq_ctrl) >> 4);
-
- if (wh->addr1[0] & BIT(0))
- msg[3] |= cpu_to_le16(RSI_BROADCAST_PKT);
-
- if (common->band == NL80211_BAND_2GHZ)
- msg[4] = cpu_to_le16(RSI_11B_MODE);
- else
- msg[4] = cpu_to_le16((RSI_RATE_6 & 0x0f) | RSI_11G_MODE);
-
- if (conf_is_ht40(conf)) {
- msg[4] = cpu_to_le16(0xB | RSI_11G_MODE);
- msg[5] = cpu_to_le16(0x6);
- }
-
- /* Indicate to firmware to give cfm */
- if ((skb->data[16] == IEEE80211_STYPE_PROBE_REQ) && (!bss->assoc)) {
- msg[1] |= cpu_to_le16(BIT(10));
- msg[7] = cpu_to_le16(PROBEREQ_CONFIRM);
- common->mgmt_q_block = true;
- }
-
- msg[7] |= cpu_to_le16(vap_id << 8);
-
- status = adapter->host_intf_write_pkt(common->priv,
- (u8 *)msg,
- skb->len);
- if (status)
- rsi_dbg(ERR_ZONE, "%s: Failed to write the packet\n", __func__);
-
-err:
- rsi_indicate_tx_status(common->priv, skb, status);
- return status;
-}
--
2.4.11
Kalle Valo <[email protected]> writes:
> Prameela Rani Garnepudi <[email protected]> writes:
>
>> Can you please review these patches. You slipped through these patches =
=20
>> and reviewing resent patches. Is there a specific reason?=20
>
> As you are new, your patches just take more time to review than others
> and haven't had a good slot to look at those yet.
Prameela, I noticed that patchwork seems to drop your emails for some
reason. For example, in this patch I do not see your mail above, only my
reply:
https://patchwork.kernel.org/patch/9465833/
That might create problems because I usually check the discussion from
patchwork, not from my own mail archives. Keep this in mind then
commenting.
--=20
Kalle Valo=
Prameela Rani Garnepudi <[email protected]> wrote:
> The file 'rsi_91x_hal.c' is going to contain device specific
> code like firmware loading etc. As the file 'rsi_91x_pkt.c'
> contains code for preparing device (frimware understandable)
> specific descriptors for the transmit frames, it is moved to
> 'rsi_91x_hal.c'
>
> Signed-off-by: Prameela Rani Garnepudi <[email protected]>
These patches break endianess support again, at least in struct bl_header. And
also I see this AGAIN:
+/**
+ * bl_cmd() - This function initiates the BL command
+ *
+ * @adapter: Pointer to the hardware structure.
+ * @cmd: Command to write
+ * @exp_resp: Expected Response
+ * @str: Command string
+ *
+ * Return: 0 on success, -1 on failure.
+ */
+static int bl_cmd(struct rsi_hw *adapter, u8 cmd, u8 exp_resp, char *str)
+{
[...]
+fail:
+ return -EINVAL;
+}
If you insist keeping these, in my opinion useless, function documentation at
least make sure they are valid. How many times have I mentioned about this? If
you don't bother to follow this minor, but easy to fix, detail I'm starting to
wonder why I bother to use my time to review these patches and provide these
same comments over and over again.
Really, start with small patches and once you get more familiar start making
more complex patches. Or ask someone to help with reviewing the patches. And
LISTEN to feedback, just don't ignore it.
3 patches set to Changes Requested.
9465833 [1/3] rsi: Renamed the file rsi_91x_pkt.c to rsi_91x_hal.c
9465835 [2/3] rsi: Add new firmware loading method for RS9113 chip set
9465837 [3/3] rsi: Remove old firmware loading method for RS9113 chip set
--
https://patchwork.kernel.org/patch/9465833/
Documentation about submitting wireless patches and checking status
from patchwork:
https://wireless.wiki.kernel.org/en/developers/documentation/submittingpatches
Prameela Rani Garnepudi <[email protected]> writes:
> Can you please review these patches. You slipped through these patches
> and reviewing resent patches. Is there a specific reason?
As you are new, your patches just take more time to review than others
and haven't had a good slot to look at those yet.
--
Kalle Valo