Introduce a knob in mt7603 debugfs in order to enable/disable
energy detection based on CCA thresholds
Signed-off-by: Lorenzo Bianconi <[email protected]>
---
Changes since v1:
- fix file permission
---
.../wireless/mediatek/mt76/mt7603/debugfs.c | 30 +++++++++++++++++++
.../net/wireless/mediatek/mt76/mt7603/init.c | 4 ++-
.../net/wireless/mediatek/mt76/mt7603/main.c | 3 +-
.../wireless/mediatek/mt76/mt7603/mt7603.h | 6 +++-
4 files changed, 39 insertions(+), 4 deletions(-)
diff --git a/drivers/net/wireless/mediatek/mt76/mt7603/debugfs.c b/drivers/net/wireless/mediatek/mt76/mt7603/debugfs.c
index f8b3b6ab6297..9c0bea489e1f 100644
--- a/drivers/net/wireless/mediatek/mt76/mt7603/debugfs.c
+++ b/drivers/net/wireless/mediatek/mt76/mt7603/debugfs.c
@@ -40,6 +40,35 @@ mt7603_radio_read(struct seq_file *s, void *data)
return 0;
}
+static int
+mt7603_edcca_set(void *data, u64 val)
+{
+ struct mt7603_dev *dev = data;
+
+ mutex_lock(&dev->mt76.mutex);
+
+ dev->ed_monitor_enabled = !!val;
+ dev->ed_monitor = dev->ed_monitor_enabled &&
+ dev->region == NL80211_DFS_ETSI;
+ mt7603_init_edcca(dev);
+
+ mutex_unlock(&dev->mt76.mutex);
+
+ return 0;
+}
+
+static int
+mt7603_edcca_get(void *data, u64 *val)
+{
+ struct mt7603_dev *dev = data;
+
+ *val = dev->ed_monitor_enabled;
+ return 0;
+}
+
+DEFINE_DEBUGFS_ATTRIBUTE(fops_edcca, mt7603_edcca_get,
+ mt7603_edcca_set, "%lld\n");
+
void mt7603_init_debugfs(struct mt7603_dev *dev)
{
struct dentry *dir;
@@ -48,6 +77,7 @@ void mt7603_init_debugfs(struct mt7603_dev *dev)
if (!dir)
return;
+ debugfs_create_file("edcca", 0600, dir, dev, &fops_edcca);
debugfs_create_u32("reset_test", 0600, dir, &dev->reset_test);
debugfs_create_devm_seqfile(dev->mt76.dev, "reset", dir,
mt7603_reset_read);
diff --git a/drivers/net/wireless/mediatek/mt76/mt7603/init.c b/drivers/net/wireless/mediatek/mt76/mt7603/init.c
index 78cdbb70e178..4e269044f8a4 100644
--- a/drivers/net/wireless/mediatek/mt76/mt7603/init.c
+++ b/drivers/net/wireless/mediatek/mt76/mt7603/init.c
@@ -437,7 +437,9 @@ mt7603_regd_notifier(struct wiphy *wiphy,
struct ieee80211_hw *hw = wiphy_to_ieee80211_hw(wiphy);
struct mt7603_dev *dev = hw->priv;
- dev->ed_monitor = request->dfs_region == NL80211_DFS_ETSI;
+ dev->region = request->dfs_region;
+ dev->ed_monitor = dev->ed_monitor_enabled &&
+ dev->region == NL80211_DFS_ETSI;
}
static int
diff --git a/drivers/net/wireless/mediatek/mt76/mt7603/main.c b/drivers/net/wireless/mediatek/mt76/mt7603/main.c
index 0a0334dc40d5..e931af92af43 100644
--- a/drivers/net/wireless/mediatek/mt76/mt7603/main.c
+++ b/drivers/net/wireless/mediatek/mt76/mt7603/main.c
@@ -103,8 +103,7 @@ mt7603_remove_interface(struct ieee80211_hw *hw, struct ieee80211_vif *vif)
mutex_unlock(&dev->mt76.mutex);
}
-static void
-mt7603_init_edcca(struct mt7603_dev *dev)
+void mt7603_init_edcca(struct mt7603_dev *dev)
{
/* Set lower signal level to -65dBm */
mt76_rmw_field(dev, MT_RXTD(8), MT_RXTD_8_LOWER_SIGNAL, 0x23);
diff --git a/drivers/net/wireless/mediatek/mt76/mt7603/mt7603.h b/drivers/net/wireless/mediatek/mt76/mt7603/mt7603.h
index fa64bbaab0d2..944dc9a11a15 100644
--- a/drivers/net/wireless/mediatek/mt76/mt7603/mt7603.h
+++ b/drivers/net/wireless/mediatek/mt76/mt7603/mt7603.h
@@ -117,8 +117,11 @@ struct mt7603_dev {
u8 mac_work_count;
u8 mcu_running;
- u8 ed_monitor;
+ enum nl80211_dfs_regions region;
+
+ u8 ed_monitor_enabled;
+ u8 ed_monitor;
s8 ed_trigger;
u8 ed_strict_mode;
u8 ed_strong_signal;
@@ -241,4 +244,5 @@ void mt7603_update_channel(struct mt76_dev *mdev);
void mt7603_edcca_set_strict(struct mt7603_dev *dev, bool val);
void mt7603_cca_stats_reset(struct mt7603_dev *dev);
+void mt7603_init_edcca(struct mt7603_dev *dev);
#endif
--
2.20.1
On 2019-05-13 12:19, Lorenzo Bianconi wrote:
> Introduce a knob in mt7603 debugfs in order to enable/disable
> energy detection based on CCA thresholds
>
> Signed-off-by: Lorenzo Bianconi <[email protected]>
Applied, thanks.
- Felix