Hi Kalle,
here's my first pull request for 5.18
- Felix
The following changes since commit b4bb8469e90ec75c0ce81fcf6a9c3abd2f18e005:
brcmfmac: pcie: Read the console on init and shutdown (2022-02-01 14:27:08 +0200)
are available in the Git repository at:
https://github.com/nbd168/wireless tags/mt76-for-kvalo-2022-02-04
for you to fetch changes up to b3ad9d6a1d66712fb08cd59ae3e03cbdb9f80e7b:
mt76: redefine mt76_for_each_q_rx to adapt mt7986 changes (2022-02-04 11:28:36 +0100)
----------------------------------------------------------------
mt76 patches for 5.18
- mt7915 mcu code cleanup
- mt7916 support
- fixes for SDIO support
- fixes for DFS
- power management fixes
- stability improvements
- background radar detection support
----------------------------------------------------------------
Ben Greear (1):
mt76: mt7921: fix crash when startup fails.
Bo Jiao (14):
mt76: mt7915: add mt7915_mmio_probe() as a common probing function
mt76: mt7915: refine register definition
mt76: add MT_RXQ_MAIN_WA for mt7916
mt76: mt7915: rework dma.c to adapt mt7916 changes
mt76: mt7915: add firmware support for mt7916
mt76: mt7915: rework eeprom.c to adapt mt7916 changes
mt76: mt7915: enlarge wcid size to 544
mt76: mt7915: add txfree event v3
mt76: mt7915: update rx rate reporting for mt7916
mt76: mt7915: update mt7915_chan_mib_offs for mt7916
mt76: mt7915: add mt7916 calibrated data support
mt76: set wlan_idx_hi on mt7916
mt76: mt7915: add device id for mt7916
mt76: redefine mt76_for_each_q_rx to adapt mt7986 changes
Felix Fietkau (11):
mt76: mt7915: fix polling firmware-own status
mt76: mt7915: move pci specific code back to pci.c
mt76: connac: add support for passing the cipher field in bss_info
mt76: mt7615: update bss_info with cipher after setting the group key
mt76: mt7915: update bss_info with cipher after setting the group key
mt76: mt7915: add support for passing chip/firmware debug data to user space
mt76x02: improve mac error check/reset reliability
mt76: mt76x02: improve tx hang detection
mt76: mt7915: fix/rewrite the dfs state handling logic
mt76: mt7615: fix/rewrite the dfs state handling logic
mt76: mt76x02: use mt76_phy_dfs_state to determine radar detector state
Leon Yen (1):
mt76: mt7921s: fix mt7921s_mcu_[fw|drv]_pmctrl
Lorenzo Bianconi (59):
mt76: connac: fix sta_rec_wtbl tag len
mt76: mt7915: rely on mt76_connac_mcu_alloc_sta_req
mt76: mt7915: rely on mt76_connac_mcu_alloc_wtbl_req
mt76: mt7915: rely on mt76_connac_mcu_add_tlv routine
mt76: connac: move mt76_connac_mcu_get_cipher in common code
mt76: connac: move mt76_connac_chan_bw in common code
mt76: mt7915: rely on mt76_connac_get_phy utilities
mt76: connac: move mt76_connac_mcu_add_key in connac module
mt76: make mt76_sar_capa static
mt76: mt7915: use proper aid value in mt7915_mcu_wtbl_generic_tlv in sta mode
mt76: mt7915: use proper aid value in mt7915_mcu_sta_basic_tlv
mt76: mt7915: remove duplicated defs in mcu.h
mt76: connac: move mt76_connac_mcu_bss_omac_tlv in connac module
mt76: connac: move mt76_connac_mcu_bss_ext_tlv in connac module
mt76: connac: move mt76_connac_mcu_bss_basic_tlv in connac module
mt76: mt7915: rely on mt76_connac_mcu_sta_ba_tlv
mt76: mt7915: rely on mt76_connac_mcu_wtbl_ba_tlv
mt76: mt7915: rely on mt76_connac_mcu_sta_ba
mt76: mt7915: rely on mt76_connac_mcu_wtbl_generic_tlv
mt76: mt7915: rely on mt76_connac_mcu_sta_basic_tlv
mt76: mt7915: rely on mt76_connac_mcu_sta_uapsd
mt76: mt7915: rely on mt76_connac_mcu_wtbl_smps_tlv
mt76: mt7915: rely on mt76_connac_mcu_wtbl_ht_tlv
mt76: mt7915: rely on mt76_connac_mcu_wtbl_hdr_trans_tlv
mt76: connac: move mt76_connac_mcu_wtbl_update_hdr_trans in connac module
mt76: connac: introduce is_connac_v1 utility routine
mt76: connac: move mt76_connac_mcu_set_pm in connac module
mt76: mt7921: get rid of mt7921_mcu_get_eeprom
mt76: mt7915: rely on mt76_connac_mcu_start_firmware
mt76: connac: move mt76_connac_mcu_restart in common module
mt76: mt7915: rely on mt76_connac_mcu_patch_sem_ctrl/mt76_connac_mcu_start_patch
mt76: mt7915: rely on mt76_connac_mcu_init_download
mt76: connac: move mt76_connac_mcu_gen_dl_mode in mt76-connac module
mt76: mt7915: rely on mt76_connac_mcu_set_rts_thresh
mt76: connac: move mt76_connac_mcu_rdd_cmd in mt76-connac module
mt76: mt7615: fix a possible race enabling/disabling runtime-pm
mt76: mt7921e: process txfree and txstatus without allocating skbs
mt76: mt7615e: process txfree and txstatus without allocating skbs
mt76: mt7921: do not always disable fw runtime-pm
mt76: mt7921: fix a leftover race in runtime-pm
mt76: mt7615: fix a leftover race in runtime-pm
mt76: mt7921: fix endianness issues in mt7921_mcu_set_tx()
mt76: mt7921: toggle runtime-pm adding a monitor vif
mt76: mt7915: introduce mt7915_set_radar_background routine
mt76: mt7915: enable radar trigger on rdd2
mt76: mt7915: introduce rdd_monitor debugfs node
mt76: mt7915: report radar pattern if detected by rdd2
mt76: mt7915: enable radar background detection
dt-bindings:net:wireless:mediatek,mt76: add disable-radar-offchan
mt76: connac: move mt76_connac_lmac_mapping in mt76-connac module
mt76: mt7915: add missing DATA4_TB_SPTL_REUSE1 to mt7915_mac_decode_he_radiotap
mt76: mt7921: remove duplicated code in mt7921_mac_decode_he_radiotap
mt76: mt7663s: flush runtime-pm queue after waking up the device
mt76: mt7603: check sta_rates pointer in mt7603_sta_rate_tbl_update
mt76: mt7615: check sta_rates pointer in mt7615_sta_rate_tbl_update
mt76: mt7915: fix possible memory leak in mt7915_mcu_add_sta
mt76: mt7921s: fix a possible memory leak in mt7921_load_patch
mt76: do not always copy ethhdr in reverse_frag0_hdr_trans
mt76: dma: initialize skip_unmap in mt76_dma_rx_fill
MeiChia Chiu (1):
mt76: mt7915: fix the nss setting in bitrates
Peter Chiu (4):
mt76: mt7915: fix ht mcs in mt7915_mac_add_txs_skb()
mt76: mt7921: fix ht mcs in mt7921_mac_add_txs_skb()
mt76: mt7915: fix mcs_map in mt7915_mcu_set_sta_he_mcs()
mt76: mt7915: update max_mpdu_size in mt7915_mcu_sta_amsdu_tlv()
Piotr Dymacz (1):
mt76: mt7615: add support for LG LGSBWAC02 (MT7663BUN)
Sean Wang (9):
mt76: sdio: lock sdio when it is needed
mt76: mt7921s: clear MT76_STATE_MCU_RUNNING immediately after reset
mt76: mt7921e: make dev->fw_assert usage consistent
mt76: mt76_connac: fix MCU_CE_CMD_SET_ROC definition error
mt76: mt7921: set EDCA parameters with the MCU CE command
mt76: mt7921e: fix possible probe failure after reboot
mt76: sdio: disable interrupt in mt76s_sdio_irq
mt76: sdio: honor the largest Tx buffer the hardware can support
mt76: mt7921s: run sleep mode by default
Shayne Chen (1):
mt76: mt7915: set bssinfo/starec command when adding interface
Xing Song (1):
mt76: stop the radar detector after leaving dfs channel
YN Chen (2):
mt76: mt7921s: update mt7921s_wfsys_reset sequence
mt76: mt7921: forbid the doze mode when coredump is in progress
Documentation/devicetree/bindings/net/wireless/mediatek,mt76.yaml | 9 +
drivers/net/wireless/mediatek/mt76/dma.c | 14 +-
drivers/net/wireless/mediatek/mt76/mac80211.c | 30 +++-
drivers/net/wireless/mediatek/mt76/mt76.h | 22 ++-
drivers/net/wireless/mediatek/mt76/mt7603/main.c | 3 +
drivers/net/wireless/mediatek/mt76/mt7615/debugfs.c | 15 +-
drivers/net/wireless/mediatek/mt76/mt7615/init.c | 1 -
drivers/net/wireless/mediatek/mt76/mt7615/mac.c | 136 +++++++++-----
drivers/net/wireless/mediatek/mt76/mt7615/main.c | 12 +-
drivers/net/wireless/mediatek/mt76/mt7615/mcu.c | 220 ++---------------------
drivers/net/wireless/mediatek/mt76/mt7615/mmio.c | 1 +
drivers/net/wireless/mediatek/mt76/mt7615/mt7615.h | 22 +--
drivers/net/wireless/mediatek/mt76/mt7615/sdio.c | 15 +-
drivers/net/wireless/mediatek/mt76/mt7615/usb.c | 1 +
drivers/net/wireless/mediatek/mt76/mt76_connac.h | 71 +++++++-
drivers/net/wireless/mediatek/mt76/mt76_connac_mcu.c | 378 +++++++++++++++++++++++++++++++++++----
drivers/net/wireless/mediatek/mt76/mt76_connac_mcu.h | 117 +++++++++++-
drivers/net/wireless/mediatek/mt76/mt76x02.h | 3 +-
drivers/net/wireless/mediatek/mt76/mt76x02_dfs.c | 5 +-
drivers/net/wireless/mediatek/mt76/mt76x02_mac.c | 25 ++-
drivers/net/wireless/mediatek/mt76/mt76x02_mmio.c | 30 ++--
drivers/net/wireless/mediatek/mt76/mt76x02_regs.h | 2 +
drivers/net/wireless/mediatek/mt76/mt7915/Kconfig | 3 +-
drivers/net/wireless/mediatek/mt76/mt7915/debugfs.c | 217 +++++++++++++++++++++--
drivers/net/wireless/mediatek/mt76/mt7915/dma.c | 454 +++++++++++++++++++++++++++++++++--------------
drivers/net/wireless/mediatek/mt76/mt7915/eeprom.c | 87 ++++++---
drivers/net/wireless/mediatek/mt76/mt7915/eeprom.h | 9 +-
drivers/net/wireless/mediatek/mt76/mt7915/init.c | 156 ++++++++++------
drivers/net/wireless/mediatek/mt76/mt7915/mac.c | 437 ++++++++++++++++++++++++++++-----------------
drivers/net/wireless/mediatek/mt76/mt7915/mac.h | 15 +-
drivers/net/wireless/mediatek/mt76/mt7915/main.c | 131 ++++++++++----
drivers/net/wireless/mediatek/mt76/mt7915/mcu.c | 1323 ++++++++++++++++++++++++++++++++--------------------------------------------------------------------------------------------------------
drivers/net/wireless/mediatek/mt76/mt7915/mcu.h | 54 +++---
drivers/net/wireless/mediatek/mt76/mt7915/mmio.c | 577 ++++++++++++++++++++++++++++++++++++++++++++++++++++-------
drivers/net/wireless/mediatek/mt76/mt7915/mt7915.h | 87 ++++++---
drivers/net/wireless/mediatek/mt76/mt7915/pci.c | 259 ++++++---------------------
drivers/net/wireless/mediatek/mt76/mt7915/regs.h | 586 ++++++++++++++++++++++++++++++++++++++----------------------
drivers/net/wireless/mediatek/mt76/mt7915/testmode.c | 61 ++++---
drivers/net/wireless/mediatek/mt76/mt7921/debugfs.c | 37 ++--
drivers/net/wireless/mediatek/mt76/mt7921/dma.c | 119 -------------
drivers/net/wireless/mediatek/mt76/mt7921/init.c | 10 +-
drivers/net/wireless/mediatek/mt76/mt7921/mac.c | 37 ++--
drivers/net/wireless/mediatek/mt76/mt7921/main.c | 36 +++-
drivers/net/wireless/mediatek/mt76/mt7921/mcu.c | 274 +++-------------------------
drivers/net/wireless/mediatek/mt76/mt7921/mt7921.h | 21 +--
drivers/net/wireless/mediatek/mt76/mt7921/pci.c | 125 +++++++++++++
drivers/net/wireless/mediatek/mt76/mt7921/pci_mac.c | 37 +++-
drivers/net/wireless/mediatek/mt76/mt7921/pci_mcu.c | 20 ++-
drivers/net/wireless/mediatek/mt76/mt7921/regs.h | 3 +
drivers/net/wireless/mediatek/mt76/mt7921/sdio.c | 15 +-
drivers/net/wireless/mediatek/mt76/mt7921/sdio_mac.c | 6 +-
drivers/net/wireless/mediatek/mt76/mt7921/sdio_mcu.c | 38 ++++
drivers/net/wireless/mediatek/mt76/sdio.c | 14 +-
drivers/net/wireless/mediatek/mt76/sdio.h | 2 +
drivers/net/wireless/mediatek/mt76/sdio_txrx.c | 26 +--
55 files changed, 3570 insertions(+), 2838 deletions(-)
Felix Fietkau <[email protected]> writes:
> Hi Kalle,
>
> here's my first pull request for 5.18
>
> - Felix
>
> The following changes since commit b4bb8469e90ec75c0ce81fcf6a9c3abd2f18e005:
>
> brcmfmac: pcie: Read the console on init and shutdown (2022-02-01 14:27:08 +0200)
>
> are available in the Git repository at:
>
> https://github.com/nbd168/wireless tags/mt76-for-kvalo-2022-02-04
>
> for you to fetch changes up to b3ad9d6a1d66712fb08cd59ae3e03cbdb9f80e7b:
>
> mt76: redefine mt76_for_each_q_rx to adapt mt7986 changes (2022-02-04 11:28:36 +0100)
>
> ----------------------------------------------------------------
> mt76 patches for 5.18
>
> - mt7915 mcu code cleanup
> - mt7916 support
> - fixes for SDIO support
> - fixes for DFS
> - power management fixes
> - stability improvements
> - background radar detection support
>
> ----------------------------------------------------------------
Pulled, thanks.
--
https://patchwork.kernel.org/project/linux-wireless/list/
https://wireless.wiki.kernel.org/en/developers/documentation/submittingpatches