2010/8/16 Arthur Moreira <[email protected]>:
> Ok, tks G?bor
>
> i will wait, i need much of this card working in monitor mode for
> tests and demonstration and my organization. i work with security in
> my city. and i dont want to plug another card, like usb ou pciexpreess
> card than a original embedded.
>
> if you need a help to tests and beta version of driver or modules
> call me
>
>
> ? ? ? ? ? ? ? Arthur Moreira
Well, I post any testing requests on the list, so you will probably
see them here.
Also, please use the Reply to All button when replying to a list!
>
> 2010/8/16 G?bor Stefanik <[email protected]>:
>> 2010/8/16 Arthur Moreira <[email protected]>:
>>> Hi,
>>> I have a BCM4353 card, with the ?hybrid module ?wl work fine to find
>>> and conect to networks.
>>> But, a want to put the card in monitor mode.
>>>
>>> (my card is a 802.11bgN mini card, in a dell vostro)
>>>
>>> this path will help me? and.. how to aply the path? the comand path $#
>>> < file ? ????
>>> tks
>>>
>>>
>>> ? ? ? ? ? ? ? Arthur Moreira
>>>
>>
>> No, this patch is only for BCM4312 devices, not the BCM43224 that you
>> have (there is no such thing as a "BCM4353" AFAIK - PCI device IDs
>> don't map directly to chip IDs!). Your card is an N-PHY, probably
>> revision 4 or 5 (you can see the revision by adding 14e4:4353 to the
>> list of PCI IDs in ssb, then looking for the "FOUND UNSUPPORTED PHY"
>> line in dmesg). We are working on N-PHYs, revisions <=2 will likely be
>> usable soon; rev.3 and newer will take longer, however. (It is
>> possible that this patch will also be needed for N-PHYs if they show
>> similar DMA errors to the 4312, but it is certainly not enough to get
>> N-PHYs to work.)
>>
>>>
>>>
>>>
>>> 2010/8/16 G?bor Stefanik <[email protected]>:
>>>> Hello Everyone!
>>>>
>>>> If you are experiencing DMA errors on a BCM4312, please test the
>>>> attached patch. It implements the PCI-E SERDES workaround, which the
>>>> hybrid driver is applying during early init to LP-PHY cards, and which
>>>> is a good candidate for the cause of the DMA error.
>>>> Note that this is not a final patch & it may cause collateral damage
>>>> for non-4312 cards; if it helps the 4312 problem, I will submit a
>>>> cleaned-up version.
>>>>
>>>> Thanks,
>>>> G?bor
>>>>
>>>
>>
>>
>>
>> --
>> Vista: [V]iruses, [I]ntruders, [S]pyware, [T]rojans and [A]dware. :-)
>>
>
--
Vista: [V]iruses, [I]ntruders, [S]pyware, [T]rojans and [A]dware. :-)
all right
but i try to test with pacience, but i am newer in module compilation and paths
if you create a topic only for the device 4353 is better.
and obvios, ever... sorry for the bad english, but a talk from brazil.
if you can, try to post the step by step for the path aplication..
for the diff file and the path file... i know to aply the path for the
path comand (path <# file)
but i dont know the essencial.
if you send me modules for test. tks.
and the steps
? ? ? ? ? ? ? Arthur Moreira
2010/8/16 G?bor Stefanik <[email protected]>:
> 2010/8/16 Arthur Moreira <[email protected]>:
>> Ok, tks G?bor
>>
>> i will wait, i need much of this card working in monitor mode for
>> tests and demonstration and my organization. i work with security in
>> my city. and i dont want to plug another card, like usb ou pciexpreess
>> card than a original embedded.
>>
>> if you need a help to tests and beta version of driver or modules
>> call me
>>
>>
>> ? ? ? ? ? ? ? Arthur Moreira
>
> Well, I post any testing requests on the list, so you will probably
> see them here.
>
> Also, please use the Reply to All button when replying to a list!
>
>>
>> 2010/8/16 G?bor Stefanik <[email protected]>:
>>> 2010/8/16 Arthur Moreira <[email protected]>:
>>>> Hi,
>>>> I have a BCM4353 card, with the ?hybrid module ?wl work fine to find
>>>> and conect to networks.
>>>> But, a want to put the card in monitor mode.
>>>>
>>>> (my card is a 802.11bgN mini card, in a dell vostro)
>>>>
>>>> this path will help me? and.. how to aply the path? the comand path $#
>>>> < file ? ????
>>>> tks
>>>>
>>>>
>>>> ? ? ? ? ? ? ? Arthur Moreira
>>>>
>>>
>>> No, this patch is only for BCM4312 devices, not the BCM43224 that you
>>> have (there is no such thing as a "BCM4353" AFAIK - PCI device IDs
>>> don't map directly to chip IDs!). Your card is an N-PHY, probably
>>> revision 4 or 5 (you can see the revision by adding 14e4:4353 to the
>>> list of PCI IDs in ssb, then looking for the "FOUND UNSUPPORTED PHY"
>>> line in dmesg). We are working on N-PHYs, revisions <=2 will likely be
>>> usable soon; rev.3 and newer will take longer, however. (It is
>>> possible that this patch will also be needed for N-PHYs if they show
>>> similar DMA errors to the 4312, but it is certainly not enough to get
>>> N-PHYs to work.)
>>>
>>>>
>>>>
>>>>
>>>> 2010/8/16 G?bor Stefanik <[email protected]>:
>>>>> Hello Everyone!
>>>>>
>>>>> If you are experiencing DMA errors on a BCM4312, please test the
>>>>> attached patch. It implements the PCI-E SERDES workaround, which the
>>>>> hybrid driver is applying during early init to LP-PHY cards, and which
>>>>> is a good candidate for the cause of the DMA error.
>>>>> Note that this is not a final patch & it may cause collateral damage
>>>>> for non-4312 cards; if it helps the 4312 problem, I will submit a
>>>>> cleaned-up version.
>>>>>
>>>>> Thanks,
>>>>> G?bor
>>>>>
>>>>
>>>
>>>
>>>
>>> --
>>> Vista: [V]iruses, [I]ntruders, [S]pyware, [T]rojans and [A]dware. :-)
>>>
>>
>
>
>
> --
> Vista: [V]iruses, [I]ntruders, [S]pyware, [T]rojans and [A]dware. :-)
>