From: Anilkumar Kolli <[email protected]>
This patch series adds support for tx bitrate using
.sta_statistics callback.
tx bitrate tested on QCA4019 using iw.
Anilkumar Kolli (2):
ath10k: add per peer htt tx stats support for 10.4
ath10k: add support for per sta tx bitrate
drivers/net/wireless/ath/ath10k/core.h | 17 ++++
drivers/net/wireless/ath/ath10k/debugfs_sta.c | 13 +++
drivers/net/wireless/ath/ath10k/htt.c | 2 +
drivers/net/wireless/ath/ath10k/htt.h | 25 +++++
drivers/net/wireless/ath/ath10k/htt_rx.c | 125 +++++++++++++++++++++++++
drivers/net/wireless/ath/ath10k/wmi.h | 10 +-
6 files changed, 191 insertions(+), 1 deletion(-)
--
1.7.9.5
From: Anilkumar Kolli <[email protected]>
Per peer tx stats are part of 'HTT_10_4_T2H_MSG_TYPE_PEER_STATS'
event, Firmware sends one HTT event for every four PPDUs.
HTT payload has success pkts/bytes, failed pkts/bytes, retry
pkts/bytes and rate info per ppdu.
Peer stats are enabled through 'WMI_SERVICE_PEER_STATS',
which are nowadays enabled by default.
Parse peer stats and update the tx rate information per STA.
tx rate, Peer stats are tested on QCA4019 with Firmware version
10.4-3.2.1-00028.
Signed-off-by: Anilkumar Kolli <[email protected]>
---
v2:
* address Kalle's comments
* fix compilation warnings
drivers/net/wireless/ath/ath10k/core.h | 17 ++++
drivers/net/wireless/ath/ath10k/htt.c | 2 +
drivers/net/wireless/ath/ath10k/htt.h | 25 ++++++
drivers/net/wireless/ath/ath10k/htt_rx.c | 125 ++++++++++++++++++++++++++++++
drivers/net/wireless/ath/ath10k/wmi.h | 10 ++-
5 files changed, 178 insertions(+), 1 deletion(-)
diff --git a/drivers/net/wireless/ath/ath10k/core.h b/drivers/net/wireless/ath/ath10k/core.h
index dda49af1eb74..fc3d3bded265 100644
--- a/drivers/net/wireless/ath/ath10k/core.h
+++ b/drivers/net/wireless/ath/ath10k/core.h
@@ -337,6 +337,7 @@ struct ath10k_sta {
u32 nss;
u32 smps;
u16 peer_id;
+ struct rate_info txrate;
struct work_struct update_wk;
@@ -694,6 +695,21 @@ struct ath10k_fw_components {
struct ath10k_fw_file fw_file;
};
+struct ath10k_per_peer_tx_stats {
+ u32 succ_bytes;
+ u32 retry_bytes;
+ u32 failed_bytes;
+ u8 ratecode;
+ u8 flags;
+ u16 peer_id;
+ u16 succ_pkts;
+ u16 retry_pkts;
+ u16 failed_pkts;
+ u16 duration;
+ u32 reserved1;
+ u32 reserved2;
+};
+
struct ath10k {
struct ath_common ath_common;
struct ieee80211_hw *hw;
@@ -906,6 +922,7 @@ struct ath10k {
struct ath10k_thermal thermal;
struct ath10k_wow wow;
+ struct ath10k_per_peer_tx_stats peer_tx_stats;
/* NAPI */
struct net_device napi_dev;
diff --git a/drivers/net/wireless/ath/ath10k/htt.c b/drivers/net/wireless/ath/ath10k/htt.c
index 130cd9502021..cd160b16db1e 100644
--- a/drivers/net/wireless/ath/ath10k/htt.c
+++ b/drivers/net/wireless/ath/ath10k/htt.c
@@ -137,6 +137,8 @@ static const enum htt_t2h_msg_type htt_10_4_t2h_msg_types[] = {
HTT_T2H_MSG_TYPE_STATS_NOUPLOAD,
[HTT_10_4_T2H_MSG_TYPE_TX_MODE_SWITCH_IND] =
HTT_T2H_MSG_TYPE_TX_MODE_SWITCH_IND,
+ [HTT_10_4_T2H_MSG_TYPE_PEER_STATS] =
+ HTT_T2H_MSG_TYPE_PEER_STATS,
};
int ath10k_htt_connect(struct ath10k_htt *htt)
diff --git a/drivers/net/wireless/ath/ath10k/htt.h b/drivers/net/wireless/ath/ath10k/htt.h
index 0d2ed09f202b..164eb3a10566 100644
--- a/drivers/net/wireless/ath/ath10k/htt.h
+++ b/drivers/net/wireless/ath/ath10k/htt.h
@@ -419,6 +419,7 @@ enum htt_10_4_t2h_msg_type {
HTT_10_4_T2H_MSG_TYPE_STATS_NOUPLOAD = 0x18,
/* 0x19 to 0x2f are reserved */
HTT_10_4_T2H_MSG_TYPE_TX_MODE_SWITCH_IND = 0x30,
+ HTT_10_4_T2H_MSG_TYPE_PEER_STATS = 0x31,
/* keep this last */
HTT_10_4_T2H_NUM_MSGS
};
@@ -453,6 +454,7 @@ enum htt_t2h_msg_type {
HTT_T2H_MSG_TYPE_TX_FETCH_IND,
HTT_T2H_MSG_TYPE_TX_FETCH_CONFIRM,
HTT_T2H_MSG_TYPE_TX_MODE_SWITCH_IND,
+ HTT_T2H_MSG_TYPE_PEER_STATS,
/* keep this last */
HTT_T2H_NUM_MSGS
};
@@ -1470,6 +1472,28 @@ struct htt_channel_change {
__le32 phymode;
} __packed;
+struct htt_per_peer_tx_stats_ind {
+ __le32 succ_bytes;
+ __le32 retry_bytes;
+ __le32 failed_bytes;
+ u8 ratecode;
+ u8 flags;
+ __le16 peer_id;
+ __le16 succ_pkts;
+ __le16 retry_pkts;
+ __le16 failed_pkts;
+ __le16 tx_duration;
+ __le32 reserved1;
+ __le32 reserved2;
+} __packed;
+
+struct htt_peer_tx_stats {
+ u8 num_ppdu;
+ u8 ppdu_len;
+ u8 version;
+ u8 payload[0];
+} __packed;
+
union htt_rx_pn_t {
/* WEP: 24-bit PN */
u32 pn24;
@@ -1521,6 +1545,7 @@ struct htt_resp {
struct htt_tx_fetch_confirm tx_fetch_confirm;
struct htt_tx_mode_switch_ind tx_mode_switch_ind;
struct htt_channel_change chan_change;
+ struct htt_peer_tx_stats peer_tx_stats;
};
} __packed;
diff --git a/drivers/net/wireless/ath/ath10k/htt_rx.c b/drivers/net/wireless/ath/ath10k/htt_rx.c
index 0b4c1562420f..ef28b358cf5e 100644
--- a/drivers/net/wireless/ath/ath10k/htt_rx.c
+++ b/drivers/net/wireless/ath/ath10k/htt_rx.c
@@ -2194,6 +2194,128 @@ void ath10k_htt_htc_t2h_msg_handler(struct ath10k *ar, struct sk_buff *skb)
dev_kfree_skb_any(skb);
}
+static inline bool is_valid_legacy_rate(u8 rate)
+{
+ static const u8 legacy_rates[] = {1, 2, 5, 11, 6, 9, 12,
+ 18, 24, 36, 48, 54};
+ int i;
+
+ for (i = 0; i < ARRAY_SIZE(legacy_rates); i++) {
+ if (rate == legacy_rates[i])
+ return true;
+ }
+
+ return false;
+}
+
+static void
+ath10k_update_per_peer_tx_stats(struct ath10k *ar,
+ struct ieee80211_sta *sta,
+ struct ath10k_per_peer_tx_stats *peer_stats)
+{
+ struct ath10k_sta *arsta = (struct ath10k_sta *)sta->drv_priv;
+ u8 rate = 0, sgi;
+ struct rate_info txrate;
+
+ lockdep_assert_held(&ar->data_lock);
+
+ txrate.flags = ATH10K_HW_PREAMBLE(peer_stats->ratecode);
+ txrate.bw = ATH10K_HW_BW(peer_stats->flags);
+ txrate.nss = ATH10K_HW_NSS(peer_stats->ratecode);
+ txrate.mcs = ATH10K_HW_MCS_RATE(peer_stats->ratecode);
+ sgi = ATH10K_HW_GI(peer_stats->flags);
+
+ if (((txrate.flags == WMI_RATE_PREAMBLE_HT) ||
+ (txrate.flags == WMI_RATE_PREAMBLE_VHT)) && txrate.mcs > 9) {
+ ath10k_warn(ar, "Invalid mcs %hhd peer stats", txrate.mcs);
+ return;
+ }
+
+ if (txrate.flags == WMI_RATE_PREAMBLE_CCK ||
+ txrate.flags == WMI_RATE_PREAMBLE_OFDM) {
+ rate = ATH10K_HW_LEGACY_RATE(peer_stats->ratecode);
+
+ if (!is_valid_legacy_rate(rate)) {
+ ath10k_warn(ar, "Invalid legacy rate %hhd peer stats",
+ rate);
+ return;
+ }
+
+ /* This is hacky, FW sends CCK rate 5.5Mbps as 6 */
+ rate *= 10;
+ if (rate == 60 && txrate.flags == WMI_RATE_PREAMBLE_CCK)
+ rate = rate - 5;
+ arsta->txrate.legacy = rate * 10;
+ } else if (txrate.flags == WMI_RATE_PREAMBLE_HT) {
+ arsta->txrate.flags = RATE_INFO_FLAGS_MCS;
+ arsta->txrate.mcs = txrate.mcs;
+ } else {
+ arsta->txrate.flags = RATE_INFO_FLAGS_VHT_MCS;
+ arsta->txrate.mcs = txrate.mcs;
+ }
+
+ if (sgi)
+ arsta->txrate.flags |= RATE_INFO_FLAGS_SHORT_GI;
+
+ arsta->txrate.nss = txrate.nss;
+ arsta->txrate.bw = txrate.bw + RATE_INFO_BW_20;
+}
+
+static void ath10k_htt_fetch_peer_stats(struct ath10k *ar,
+ struct sk_buff *skb)
+{
+ struct htt_resp *resp = (struct htt_resp *)skb->data;
+ struct ath10k_per_peer_tx_stats *p_tx_stats = &ar->peer_tx_stats;
+ struct htt_per_peer_tx_stats_ind *tx_stats;
+ struct ieee80211_sta *sta;
+ struct ath10k_peer *peer;
+ int peer_id, i;
+ u8 ppdu_len, num_ppdu;
+
+ num_ppdu = resp->peer_tx_stats.num_ppdu;
+ ppdu_len = resp->peer_tx_stats.ppdu_len * sizeof(__le32);
+
+ if (skb->len < sizeof(struct htt_resp_hdr) + num_ppdu * ppdu_len) {
+ ath10k_warn(ar, "Invalid peer stats buf length %d\n", skb->len);
+ return;
+ }
+
+ tx_stats = (struct htt_per_peer_tx_stats_ind *)
+ (resp->peer_tx_stats.payload);
+ peer_id = tx_stats->peer_id;
+
+ rcu_read_lock();
+ spin_lock_bh(&ar->data_lock);
+ peer = ath10k_peer_find_by_id(ar, peer_id);
+ if (!peer) {
+ ath10k_warn(ar, "Invalid peer id %d peer stats buffer\n",
+ peer_id);
+ goto out;
+ }
+
+ sta = peer->sta;
+ for (i = 0; i < num_ppdu; i++) {
+ tx_stats = (struct htt_per_peer_tx_stats_ind *)
+ (resp->peer_tx_stats.payload + i * ppdu_len);
+
+ p_tx_stats->succ_bytes = __le32_to_cpu(tx_stats->succ_bytes);
+ p_tx_stats->retry_bytes = __le32_to_cpu(tx_stats->retry_bytes);
+ p_tx_stats->failed_bytes =
+ __le32_to_cpu(tx_stats->failed_bytes);
+ p_tx_stats->ratecode = tx_stats->ratecode;
+ p_tx_stats->flags = tx_stats->flags;
+ p_tx_stats->succ_pkts = __le16_to_cpu(tx_stats->succ_pkts);
+ p_tx_stats->retry_pkts = __le16_to_cpu(tx_stats->retry_pkts);
+ p_tx_stats->failed_pkts = __le16_to_cpu(tx_stats->failed_pkts);
+
+ ath10k_update_per_peer_tx_stats(ar, sta, p_tx_stats);
+ }
+
+out:
+ spin_unlock_bh(&ar->data_lock);
+ rcu_read_unlock();
+}
+
bool ath10k_htt_t2h_msg_handler(struct ath10k *ar, struct sk_buff *skb)
{
struct ath10k_htt *htt = &ar->htt;
@@ -2354,6 +2476,9 @@ bool ath10k_htt_t2h_msg_handler(struct ath10k *ar, struct sk_buff *skb)
case HTT_T2H_MSG_TYPE_TX_MODE_SWITCH_IND:
ath10k_htt_rx_tx_mode_switch_ind(ar, skb);
break;
+ case HTT_T2H_MSG_TYPE_PEER_STATS:
+ ath10k_htt_fetch_peer_stats(ar, skb);
+ break;
case HTT_T2H_MSG_TYPE_EN_STATS:
default:
ath10k_warn(ar, "htt event (%d) not handled\n",
diff --git a/drivers/net/wireless/ath/ath10k/wmi.h b/drivers/net/wireless/ath/ath10k/wmi.h
index 1b243c899bef..e108d49998c3 100644
--- a/drivers/net/wireless/ath/ath10k/wmi.h
+++ b/drivers/net/wireless/ath/ath10k/wmi.h
@@ -4603,9 +4603,17 @@ enum wmi_rate_preamble {
#define ATH10K_HW_NSS(rate) (1 + (((rate) >> 4) & 0x3))
#define ATH10K_HW_PREAMBLE(rate) (((rate) >> 6) & 0x3)
-#define ATH10K_HW_RATECODE(rate, nss, preamble) \
+#define ATH10K_HW_MCS_RATE(rate) ((rate) & 0xf)
+#define ATH10K_HW_LEGACY_RATE(rate) ((rate) & 0x3f)
+#define ATH10K_HW_BW(flags) (((flags) >> 3) & 0x3)
+#define ATH10K_HW_GI(flags) (((flags) >> 5) & 0x1)
+#define ATH10K_HW_RATECODE(rate, nss, preamble) \
(((preamble) << 6) | ((nss) << 4) | (rate))
+#define VHT_MCS_NUM 10
+#define VHT_BW_NUM 4
+#define VHT_NSS_NUM 4
+
/* Value to disable fixed rate setting */
#define WMI_FIXED_RATE_NONE (0xff)
--
1.7.9.5
Yeoh Chun-Yeow <[email protected]> writes:
> On Fri, Oct 7, 2016 at 10:58 PM, <[email protected]> wrote:
>> From: Anilkumar Kolli <[email protected]>
>>
>> Per peer tx stats are part of 'HTT_10_4_T2H_MSG_TYPE_PEER_STATS'
>> event, Firmware sends one HTT event for every four PPDUs.
>> HTT payload has success pkts/bytes, failed pkts/bytes, retry
>> pkts/bytes and rate info per ppdu.
>> Peer stats are enabled through 'WMI_SERVICE_PEER_STATS',
>> which are nowadays enabled by default.
>>
>> Parse peer stats and update the tx rate information per STA.
>>
>> tx rate, Peer stats are tested on QCA4019 with Firmware version
>> 10.4-3.2.1-00028.
>>
>
> Is QCA988X supported? I have tried to test with
> firmware-5.bin_10.2.4.70.56 but not working.
My understanding is that 10.2 branch does not have this feature,
unfortunately.
--=20
Kalle Valo=
Yeoh Chun-Yeow <[email protected]> writes:
>> My understanding is that 10.2 branch does not have this feature,
>> unfortunately.
>>
>
> Alright, noted.
>
> Is QCA988X going to have firmware 10.4 support?
I wish it would have but I don't know the current status.
--=20
Kalle Valo=
>
> My understanding is that 10.2 branch does not have this feature,
> unfortunately.
>
Alright, noted.
Is QCA988X going to have firmware 10.4 support?
---
Chun-Yeow