On Wed, Jan 27, 2021 at 5:23 AM Emil Renner Berthing <[email protected]> wrote:
>
> In commit d3ccc14dfe95 most of the tasklets in this driver was
> updated to the new API. However for the rx_work_tasklet only the
> type of the callback was changed from
> void _rtl_rx_work(unsigned long data)
> to
> void _rtl_rx_work(struct tasklet_struct *t).
>
> The initialization of rx_work_tasklet was still open-coded and the
> function pointer just cast into the old type, and hence nothing sets
> rx_work_tasklet.use_callback = true and the callback was still called as
>
> t->func(t->data);
>
> with uninitialized/zero t->data.
>
> Commit 6b8c7574a5f8 changed the casting of _rtl_rx_work a bit and
> initialized t->data to a pointer to the tasklet cast to an unsigned
> long.
>
> This way calling t->func(t->data) might actually work through all the
> casting, but it still doesn't update the code to use the new tasklet
> API.
>
> Let's use the new tasklet_setup to initialize rx_work_tasklet properly
> and set rx_work_tasklet.use_callback = true so that the callback is
> called as
>
> t->callback(t);
>
> without all the casting.
>
> Fixes: 6b8c7574a5f8 ("rtlwifi: fix build warning")
> Fixes: d3ccc14dfe95 ("rtlwifi/rtw88: convert tasklets to use new tasklet_setup() API")
> Signed-off-by: Emil Renner Berthing <[email protected]>
Since the current code works, this could target net-next without Fixes tags.
Acked-by: Willem de Bruijn <[email protected]>
Willem de Bruijn <[email protected]> writes:
> On Wed, Jan 27, 2021 at 5:23 AM Emil Renner Berthing <[email protected]> wrote:
>>
>> In commit d3ccc14dfe95 most of the tasklets in this driver was
>> updated to the new API. However for the rx_work_tasklet only the
>> type of the callback was changed from
>> void _rtl_rx_work(unsigned long data)
>> to
>> void _rtl_rx_work(struct tasklet_struct *t).
>>
>> The initialization of rx_work_tasklet was still open-coded and the
>> function pointer just cast into the old type, and hence nothing sets
>> rx_work_tasklet.use_callback = true and the callback was still called as
>>
>> t->func(t->data);
>>
>> with uninitialized/zero t->data.
>>
>> Commit 6b8c7574a5f8 changed the casting of _rtl_rx_work a bit and
>> initialized t->data to a pointer to the tasklet cast to an unsigned
>> long.
>>
>> This way calling t->func(t->data) might actually work through all the
>> casting, but it still doesn't update the code to use the new tasklet
>> API.
>>
>> Let's use the new tasklet_setup to initialize rx_work_tasklet properly
>> and set rx_work_tasklet.use_callback = true so that the callback is
>> called as
>>
>> t->callback(t);
>>
>> without all the casting.
>>
>> Fixes: 6b8c7574a5f8 ("rtlwifi: fix build warning")
>> Fixes: d3ccc14dfe95 ("rtlwifi/rtw88: convert tasklets to use new
>> tasklet_setup() API")
>> Signed-off-by: Emil Renner Berthing <[email protected]>
>
> Since the current code works, this could target net-next
This should go to wireless-drivers-next, not net-next.
> without Fixes tags.
Correct, no need for Fixes tag as there's no bug to fix. This is only
cleanup AFAICS.
--
https://patchwork.kernel.org/project/linux-wireless/list/
https://wireless.wiki.kernel.org/en/developers/documentation/submittingpatches
On Wed, 27 Jan 2021 at 16:20, Kalle Valo <[email protected]> wrote:
>
> Willem de Bruijn <[email protected]> writes:
>
> > On Wed, Jan 27, 2021 at 5:23 AM Emil Renner Berthing <[email protected]> wrote:
> >>
> >> In commit d3ccc14dfe95 most of the tasklets in this driver was
> >> updated to the new API. However for the rx_work_tasklet only the
> >> type of the callback was changed from
> >> void _rtl_rx_work(unsigned long data)
> >> to
> >> void _rtl_rx_work(struct tasklet_struct *t).
> >>
> >> The initialization of rx_work_tasklet was still open-coded and the
> >> function pointer just cast into the old type, and hence nothing sets
> >> rx_work_tasklet.use_callback = true and the callback was still called as
> >>
> >> t->func(t->data);
> >>
> >> with uninitialized/zero t->data.
> >>
> >> Commit 6b8c7574a5f8 changed the casting of _rtl_rx_work a bit and
> >> initialized t->data to a pointer to the tasklet cast to an unsigned
> >> long.
> >>
> >> This way calling t->func(t->data) might actually work through all the
> >> casting, but it still doesn't update the code to use the new tasklet
> >> API.
> >>
> >> Let's use the new tasklet_setup to initialize rx_work_tasklet properly
> >> and set rx_work_tasklet.use_callback = true so that the callback is
> >> called as
> >>
> >> t->callback(t);
> >>
> >> without all the casting.
> >>
> >> Fixes: 6b8c7574a5f8 ("rtlwifi: fix build warning")
> >> Fixes: d3ccc14dfe95 ("rtlwifi/rtw88: convert tasklets to use new
> >> tasklet_setup() API")
> >> Signed-off-by: Emil Renner Berthing <[email protected]>
> >
> > Since the current code works, this could target net-next
>
> This should go to wireless-drivers-next, not net-next.
>
> > without Fixes tags.
>
> Correct, no need for Fixes tag as there's no bug to fix. This is only
> cleanup AFAICS.
I can definitely see how you can reasonably disagree, but I would not
be comfortable having code that only works because the calling
conventions of all relevant architectures happen to put the first
unsigned long argument and the first pointer argument in the same
register.
If you want to be conservative I'd much rather revert all the changes
around rx_work_tasklet including the new type of the _rtl_rx_work
callback, so we don't have to rely on calling conventions matching up.
In any case: as long as this fix eventually ends up upstream I'm fine.
/Emil
Emil Renner Berthing <[email protected]> writes:
> On Wed, 27 Jan 2021 at 16:20, Kalle Valo <[email protected]> wrote:
>>
>> Willem de Bruijn <[email protected]> writes:
>>
>> > On Wed, Jan 27, 2021 at 5:23 AM Emil Renner Berthing <[email protected]> wrote:
>> >>
>> >> In commit d3ccc14dfe95 most of the tasklets in this driver was
>> >> updated to the new API. However for the rx_work_tasklet only the
>> >> type of the callback was changed from
>> >> void _rtl_rx_work(unsigned long data)
>> >> to
>> >> void _rtl_rx_work(struct tasklet_struct *t).
>> >>
>> >> The initialization of rx_work_tasklet was still open-coded and the
>> >> function pointer just cast into the old type, and hence nothing sets
>> >> rx_work_tasklet.use_callback = true and the callback was still called as
>> >>
>> >> t->func(t->data);
>> >>
>> >> with uninitialized/zero t->data.
>> >>
>> >> Commit 6b8c7574a5f8 changed the casting of _rtl_rx_work a bit and
>> >> initialized t->data to a pointer to the tasklet cast to an unsigned
>> >> long.
>> >>
>> >> This way calling t->func(t->data) might actually work through all the
>> >> casting, but it still doesn't update the code to use the new tasklet
>> >> API.
>> >>
>> >> Let's use the new tasklet_setup to initialize rx_work_tasklet properly
>> >> and set rx_work_tasklet.use_callback = true so that the callback is
>> >> called as
>> >>
>> >> t->callback(t);
>> >>
>> >> without all the casting.
>> >>
>> >> Fixes: 6b8c7574a5f8 ("rtlwifi: fix build warning")
>> >> Fixes: d3ccc14dfe95 ("rtlwifi/rtw88: convert tasklets to use new
>> >> tasklet_setup() API")
>> >> Signed-off-by: Emil Renner Berthing <[email protected]>
>> >
>> > Since the current code works, this could target net-next
>>
>> This should go to wireless-drivers-next, not net-next.
>>
>> > without Fixes tags.
>>
>> Correct, no need for Fixes tag as there's no bug to fix. This is only
>> cleanup AFAICS.
Forgot to mention that I can remove the Fixes tags during commit, so no
need to resend just because of those.
> I can definitely see how you can reasonably disagree, but I would not
> be comfortable having code that only works because the calling
> conventions of all relevant architectures happen to put the first
> unsigned long argument and the first pointer argument in the same
> register.
If there's a bug this patch fixes please explain it clearly in the
commit log. But as I read it (though I admit very quickly) I understood
this is just cleanup.
--
https://patchwork.kernel.org/project/linux-wireless/list/
https://wireless.wiki.kernel.org/en/developers/documentation/submittingpatches
On Wed, 27 Jan 2021 at 16:33, Kalle Valo <[email protected]> wrote:
> ...
> Forgot to mention that I can remove the Fixes tags during commit, so no
> need to resend just because of those.
Cool, thanks.
> > I can definitely see how you can reasonably disagree, but I would not
> > be comfortable having code that only works because the calling
> > conventions of all relevant architectures happen to put the first
> > unsigned long argument and the first pointer argument in the same
> > register.
>
> If there's a bug this patch fixes please explain it clearly in the
> commit log. But as I read it (though I admit very quickly) I understood
> this is just cleanup.
Sorry, I'll try again.
So the tasklet_struct looks like this:
struct tasklet_struct {
..
bool use_callback;
union {
void (*func)(unsigned long);
void (*callback)(struct tasklet_struct *);
};
unsigned long data;
};
..and the use_callback flag is used like this:
if (t->use_callback)
t->callback(t);
else
t->func(t->data);
Now commit d3ccc14dfe95 changed the _rtl_rx_work to be of the new
callback, not func, type. But it didn't actually set the use_callback
flag, and just typecast the _rtl_rx_work function pointer and assigned
it to the func member. So _rtl_rx_work is still called as
t->func(t->data) even though it was rewritten to be called as
t->callback(t).
Now 6b8c7574a5f8 set t->data = (unsigned long)t, so calling
t->func(t->data) will probably work on most architectures because:
a) "unsigned long" and "struct tasklet_struct *" has the same width on
all Linux-capable architectures and
b) calling t->func(t->data) will put the value from t->data into the
same register as the function
void _rtl_rx_work(struct tasklet_struct *t)
expects to find the pointer t in the C calling conventions used by
all relevant architectures.
I guess it's debatable weather this is a bug or just ugly code.
/Emil