Hi!
You might want to include a mention of OpenFWWF (GNU GPL v2 drivers for certain Broadcom 43XX wifis) on this b43 page http://linuxwireless.org/en/users/Drivers/b43
http://www.ing.unibs.it/~openfwwf/
Mikko
Hi
On Saturday 06 October 2012, Larry Finger wrote:
> On 10/06/2012 02:15 PM, Rami Rosen wrote:
> > Hi,
> > - Thanks ! good news !
> >
> > The link to b43-tools seems to be broken.
> >
> > This failed:
> > git clone http://git.bu3sch.de/git/b43-tools.git
> >
> > The b43_v4.6.tar.gz can be downloaded
> > (BTW, when running tar xfz b43_v4.6.tar.gz,
> > am empty file named b43_v4.6.tar.gz is created inside
> > b43_v4.6/ folder)
>
> That repo was converted from HTTP to GIT form some time ago. The correct request is
>
> git clone git://git.bu3sch.de/git/b43-tools.git
>
> It appears, however, the git.bu3sch.de is down.
It's
http://git.bues.ch/gitweb
http://git.bues.ch/gitweb?p=b43-ucode.git;a=summary
git://git.bues.ch/b43-ucode.git
these days.
However it's a predecessor to OpenFWWF and not the working repository
for it, which unfortunately doesn't seem to be maintained in a public
repository.
Regards
Stefan Lippers-Hollmann
Hi,
It could be that I am missing something.
I tried building the firmware as explained here.
Under b43_v4.6 one firmware (extension fw) file
is created, named: ucode5.fw.
I have LinkSys WRTG54GL with backfire (10.03.x).
I am using b43 driver.
I ran:
insmod b43.ko
and got:
b43-phy0: Broadcom 5352 WLAN found (core revision 9)
phy0: Selected rate control algorithm 'minstrel'
Broadcom 43xx driver loaded [ Features: P, Firmware-ID: FW13 ]
which seems OK.
Now I copied ucode5.fw to:
/lib/firmware/b43 on the device.
I run:
hostapd /etc/hostapd.
I get this message in the kernel log:
b43 ssb0:3: firmware: requesting b43/ucode5.fw
b43 ssb0:3: firmware: requesting b43/pcm5.fw
b43 ssb0:3: firmware: requesting b43/b0g0initvals5.fw
b43 ssb0:3: firmware: requesting b43-open/ucode5.fw
b43-phy0 ERROR: Firmware file "b43/b0g0initvals5.fw" not found
b43-phy0 ERROR: Firmware file "b43-open/ucode5.fw" not found
b43-phy0 ERROR: You must go to
http://wireless.kernel.org/en/users/Drivers/b43#devicefirmware and
download the correct firmware for this driver version. Please
carefully read all instructions on this website.
Now, I noticed two things:
1) it asks also for other firmware files. Isn't the ucode5.fw
file the only one needed ?
2) It also looks for "b43-open" folder, not only for "b43".
Could it be that the driver I am using is not updated and
does not support this OpenFWWF firmware ?
(backfire has 2.6.32.27 kernel).
Or should there be some additional firmware from somewhere else ?
rgs,
Kevin
On Sun, Oct 7, 2012 at 11:33 AM, Michael B?sch <[email protected]> wrote:
> On Sat, 06 Oct 2012 15:27:55 -0500
> Larry Finger <[email protected]> wrote:
>
>> That repo was converted from HTTP to GIT form some time ago. The correct request is
>>
>> git clone git://git.bu3sch.de/git/b43-tools.git
>>
>> It appears, however, the git.bu3sch.de is down.
>
> The bu3sch.de domain is no longer registered (by me). All services are available
> under bues.ch now.
>
> git clone git://git.bues.ch/git/b43-tools.git
>
> --
> Greetings, Michael.
>
> PGP encryption is encouraged / 908D8B0E
Hi,
Thanks a lot!
> The bu3sch.de domain is no longer registered (by me). All services are available
> under bues.ch now.
>
> git clone git://git.bues.ch/git/b43-tools.git
>
It seems that the "/git/" inside this URL in wrong.
I tried as suggested:
And get:
fatal: destination path 'b43-tools' already exists and is not an empty
directory.
However:
git clone git://git.bues.ch/b43-tools.git
worked fine.
Regards,
Rami Rosen
http://ramirose.wix.com/ramirosen#!home/mainPage
Hi Kevin,
On 10/13/2012 10:46 PM, Kevin Wilson wrote:
> Hi,
> It could be that I am missing something.
> I tried building the firmware as explained here.
> Under b43_v4.6 one firmware (extension fw) file
> is created, named: ucode5.fw.
Isn't version 5.2 the latest open firmware for these broadcom devices?
Why are you using version 4.6?
> I have LinkSys WRTG54GL with backfire (10.03.x).
You could also build your own OpenWrt image and select the open firmware
in menuconfig. Then you do not have to do it yourself. I do not know if
this option is available in backfire, but it should work in trunk.
> I am using b43 driver.
>
> I ran:
> insmod b43.ko
> and got:
> b43-phy0: Broadcom 5352 WLAN found (core revision 9)
> phy0: Selected rate control algorithm 'minstrel'
> Broadcom 43xx driver loaded [ Features: P, Firmware-ID: FW13 ]
>
> which seems OK.
>
> Now I copied ucode5.fw to:
> /lib/firmware/b43 on the device.
>
> I run:ucode5.fw
> hostapd /etc/hostapd.
>
> I get this message in the kernel log:
>
> b43 ssb0:3: firmware: requesting b43/ucode5.fw
> b43 ssb0:3: firmware: requesting b43/pcm5.fw
> b43 ssb0:3: firmware: requesting b43/b0g0initvals5.fw
> b43 ssb0:3: firmware: requesting b43-open/ucode5.fw
> b43-phy0 ERROR: Firmware file "b43/b0g0initvals5.fw" not found
> b43-phy0 ERROR: Firmware file "b43-open/ucode5.fw" not found
> b43-phy0 ERROR: You must go to
> http://wireless.kernel.org/en/users/Drivers/b43#devicefirmware and
> download the correct firmware for this driver version. Please
> carefully read all instructions on this website.
>
>
>
> Now, I noticed two things:
> 1) it asks also for other firmware files. Isn't the ucode5.fw
> file the only one needed ?
You also need the initivals (b0g0bsinitvals5.fw and b0g0initvals5.fw) in
addition to the firmware itself (ucode5.fw).
> 2) It also looks for "b43-open" folder, not only for "b43".
OpenWrt takes b43 from compat-wireless, so OpenWrt 10.03.1 contains b43
from round about a year ago and not from kernel version 2.6.32.27. This
version searches in b43-open for the open source firmware and not in b43.
> Could it be that the driver I am using is not updated and
> does not support this OpenFWWF firmware ?
> (backfire has 2.6.32.27 kernel).
>
> Or should there be some additional firmware from somewhere else ?
>
> rgs,
> Kevin
>
>
> On Sun, Oct 7, 2012 at 11:33 AM, Michael B?sch <[email protected]> wrote:
>> On Sat, 06 Oct 2012 15:27:55 -0500
>> Larry Finger <[email protected]> wrote:
>>
>>> That repo was converted from HTTP to GIT form some time ago. The correct request is
>>>
>>> git clone git://git.bu3sch.de/git/b43-tools.git
>>>
>>> It appears, however, the git.bu3sch.de is down.
>>
>> The bu3sch.de domain is no longer registered (by me). All services are available
>> under bues.ch now.
>>
>> git clone git://git.bues.ch/git/b43-tools.git
>>
>> --
>> Greetings, Michael.
>>
>> PGP encryption is encouraged / 908D8B0E
> --
> To unsubscribe from this list: send the line "unsubscribe linux-wireless" in
> the body of a message to [email protected]
> More majordomo info at http://vger.kernel.org/majordomo-info.html
>
Hi,
A little correction to my previous mail:
When trying:
git clone git://git.bues.ch/git/b43-tools.git
The error was:
fatal: remote error: access denied or repository not exported:
/git/b43-tools.git
Rami Rosen
On Sun, Oct 7, 2012 at 12:13 PM, Rami Rosen <[email protected]> wrote:
> Hi,
>
> Thanks a lot!
>
>> The bu3sch.de domain is no longer registered (by me). All services are available
>> under bues.ch now.
>>
>> git clone git://git.bues.ch/git/b43-tools.git
>>
>
> It seems that the "/git/" inside this URL in wrong.
>
> I tried as suggested:
> And get:
> fatal: destination path 'b43-tools' already exists and is not an empty
> directory.
>
> However:
> git clone git://git.bues.ch/b43-tools.git
> worked fine.
>
> Regards,
> Rami Rosen
>
> http://ramirose.wix.com/ramirosen#!home/mainPage
On Sat, 06 Oct 2012 15:27:55 -0500
Larry Finger <[email protected]> wrote:
> That repo was converted from HTTP to GIT form some time ago. The correct request is
>
> git clone git://git.bu3sch.de/git/b43-tools.git
>
> It appears, however, the git.bu3sch.de is down.
The bu3sch.de domain is no longer registered (by me). All services are available
under bues.ch now.
git clone git://git.bues.ch/git/b43-tools.git
--
Greetings, Michael.
PGP encryption is encouraged / 908D8B0E
On 10/06/2012 10:36 AM, Mikko V. Viinam?ki wrote:
> Hi!
>
> You might want to include a mention of OpenFWWF (GNU GPL v2 drivers for certain Broadcom 43XX wifis) on this b43 page http://linuxwireless.org/en/users/Drivers/b43
>
> http://www.ing.unibs.it/~openfwwf/
>
> Mikko--
> To unsubscribe from this list: send the line "unsubscribe linux-wireless" in
> the body of a message to [email protected]
> More majordomo info at http://vger.kernel.org/majordomo-info.html
It is a wiki. You can change it yourself. Whern you do, be explicit about the
models that are supported.
Larry
Hi,
- Thanks ! good news !
The link to b43-tools seems to be broken.
This failed:
git clone http://git.bu3sch.de/git/b43-tools.git
The b43_v4.6.tar.gz can be downloaded
(BTW, when running tar xfz b43_v4.6.tar.gz,
am empty file named b43_v4.6.tar.gz is created inside
b43_v4.6/ folder)
rgs,
Rami Rosen
On Sat, Oct 6, 2012 at 5:36 PM, Mikko V. Viinam?ki
<[email protected]> wrote:
> Hi!
>
> You might want to include a mention of OpenFWWF (GNU GPL v2 drivers for certain Broadcom 43XX wifis) on this b43 page http://linuxwireless.org/en/users/Drivers/b43
>
> http://www.ing.unibs.it/~openfwwf/
>
> Mikko--
> To unsubscribe from this list: send the line "unsubscribe linux-wireless" in
> the body of a message to [email protected]
> More majordomo info at http://vger.kernel.org/majordomo-info.html
On 10/06/2012 02:15 PM, Rami Rosen wrote:
> Hi,
> - Thanks ! good news !
>
> The link to b43-tools seems to be broken.
>
> This failed:
> git clone http://git.bu3sch.de/git/b43-tools.git
>
> The b43_v4.6.tar.gz can be downloaded
> (BTW, when running tar xfz b43_v4.6.tar.gz,
> am empty file named b43_v4.6.tar.gz is created inside
> b43_v4.6/ folder)
That repo was converted from HTTP to GIT form some time ago. The correct request is
git clone git://git.bu3sch.de/git/b43-tools.git
It appears, however, the git.bu3sch.de is down.
Larry