in the rtl8192ce/reg.h, REG_C2HEVT_CLEAR register's address is 0x01BF
but, vendor driver's address is 0x01AF. so i change 0x01BF to 0x01AF.
also in the rtl8192ce/reg.h, 0x0551 is REG_USTIME_TSF, but vendor driver
define REG_BCN_CTRL_1. so i change the REG_USTIME_TSF to REG_BCN_CTRL_1.
according to r8192c vendor driver, rtl8192c do not use REG_USTIME_TSF.
Signed-off-by: Taehee Yoo <[email protected]>
---
drivers/net/wireless/rtlwifi/rtl8192ce/reg.h | 4 ++--
1 file changed, 2 insertions(+), 2 deletions(-)
diff --git a/drivers/net/wireless/rtlwifi/rtl8192ce/reg.h b/drivers/net/wireless/rtlwifi/rtl8192ce/reg.h
index dc8460c..21c0fc9 100644
--- a/drivers/net/wireless/rtlwifi/rtl8192ce/reg.h
+++ b/drivers/net/wireless/rtlwifi/rtl8192ce/reg.h
@@ -117,8 +117,8 @@
#define REG_MBIST_DONE 0x0178
#define REG_MBIST_FAIL 0x017C
#define REG_C2HEVT_MSG_NORMAL 0x01A0
+#define REG_C2HEVT_CLEAR 0x01AF
#define REG_C2HEVT_MSG_TEST 0x01B8
-#define REG_C2HEVT_CLEAR 0x01BF
#define REG_MCUTST_1 0x01c0
#define REG_FMETHR 0x01C8
#define REG_HMETFR 0x01CC
@@ -231,7 +231,7 @@
#define REG_RD_NAV_NXT 0x0544
#define REG_NAV_PROT_LEN 0x0546
#define REG_BCN_CTRL 0x0550
-#define REG_USTIME_TSF 0x0551
+#define REG_BCN_CTRL_1 0x0551
#define REG_MBID_NUM 0x0552
#define REG_DUAL_TSF_RST 0x0553
#define REG_BCN_INTERVAL 0x0554
--
1.9.1
On 03/28/2015 07:12 AM, Taehee Yoo wrote:
> in the rtl8192ce/reg.h, REG_C2HEVT_CLEAR register's address is 0x01BF
> but, vendor driver's address is 0x01AF. so i change 0x01BF to 0x01AF.
> also in the rtl8192ce/reg.h, 0x0551 is REG_USTIME_TSF, but vendor driver
> define REG_BCN_CTRL_1. so i change the REG_USTIME_TSF to REG_BCN_CTRL_1.
>
> according to r8192c vendor driver, rtl8192c do not use REG_USTIME_TSF.
>
> Signed-off-by: Taehee Yoo <[email protected]>
> ---
> drivers/net/wireless/rtlwifi/rtl8192ce/reg.h | 4 ++--
> 1 file changed, 2 insertions(+), 2 deletions(-)
NACK
In the code, neither REG_C2HEVT_CLEAR nor REG_USTIME_TSF is used by either
rtl8192ce nor rtl8192cu, thus it does not matter whether the definition matches
the vendor driver or not. Making this kind of change is just churning the source
without making any real difference.
Because many of these register definitions are used by all the drivers, my plan
is to create a reg.h header in rtlwifi and eliminate most or all of the headers
now associated with each driver. When I do that, I will eliminate those
definitions that are not used by any driver, but until that part is done, I
prefer that they be left alone.
Larry
>
> diff --git a/drivers/net/wireless/rtlwifi/rtl8192ce/reg.h b/drivers/net/wireless/rtlwifi/rtl8192ce/reg.h
> index dc8460c..21c0fc9 100644
> --- a/drivers/net/wireless/rtlwifi/rtl8192ce/reg.h
> +++ b/drivers/net/wireless/rtlwifi/rtl8192ce/reg.h
> @@ -117,8 +117,8 @@
> #define REG_MBIST_DONE 0x0178
> #define REG_MBIST_FAIL 0x017C
> #define REG_C2HEVT_MSG_NORMAL 0x01A0
> +#define REG_C2HEVT_CLEAR 0x01AF
> #define REG_C2HEVT_MSG_TEST 0x01B8
> -#define REG_C2HEVT_CLEAR 0x01BF
> #define REG_MCUTST_1 0x01c0
> #define REG_FMETHR 0x01C8
> #define REG_HMETFR 0x01CC
> @@ -231,7 +231,7 @@
> #define REG_RD_NAV_NXT 0x0544
> #define REG_NAV_PROT_LEN 0x0546
> #define REG_BCN_CTRL 0x0550
> -#define REG_USTIME_TSF 0x0551
> +#define REG_BCN_CTRL_1 0x0551
> #define REG_MBID_NUM 0x0552
> #define REG_DUAL_TSF_RST 0x0553
> #define REG_BCN_INTERVAL 0x0554
>
I understand your plan,
thanks a lot for your review.
2015-03-29 1:47 GMT+09:00 Larry Finger <[email protected]>:
> On 03/28/2015 07:12 AM, Taehee Yoo wrote:
>>
>> in the rtl8192ce/reg.h, REG_C2HEVT_CLEAR register's address is 0x01BF
>> but, vendor driver's address is 0x01AF. so i change 0x01BF to 0x01AF.
>> also in the rtl8192ce/reg.h, 0x0551 is REG_USTIME_TSF, but vendor driver
>> define REG_BCN_CTRL_1. so i change the REG_USTIME_TSF to REG_BCN_CTRL_1.
>>
>> according to r8192c vendor driver, rtl8192c do not use REG_USTIME_TSF.
>>
>> Signed-off-by: Taehee Yoo <[email protected]>
>> ---
>> drivers/net/wireless/rtlwifi/rtl8192ce/reg.h | 4 ++--
>> 1 file changed, 2 insertions(+), 2 deletions(-)
>
>
> NACK
>
> In the code, neither REG_C2HEVT_CLEAR nor REG_USTIME_TSF is used by either
> rtl8192ce nor rtl8192cu, thus it does not matter whether the definition
> matches the vendor driver or not. Making this kind of change is just
> churning the source without making any real difference.
>
> Because many of these register definitions are used by all the drivers, my
> plan is to create a reg.h header in rtlwifi and eliminate most or all of the
> headers now associated with each driver. When I do that, I will eliminate
> those definitions that are not used by any driver, but until that part is
> done, I prefer that they be left alone.
>
> Larry
>
>
>>
>> diff --git a/drivers/net/wireless/rtlwifi/rtl8192ce/reg.h
>> b/drivers/net/wireless/rtlwifi/rtl8192ce/reg.h
>> index dc8460c..21c0fc9 100644
>> --- a/drivers/net/wireless/rtlwifi/rtl8192ce/reg.h
>> +++ b/drivers/net/wireless/rtlwifi/rtl8192ce/reg.h
>> @@ -117,8 +117,8 @@
>> #define REG_MBIST_DONE 0x0178
>> #define REG_MBIST_FAIL 0x017C
>> #define REG_C2HEVT_MSG_NORMAL 0x01A0
>> +#define REG_C2HEVT_CLEAR 0x01AF
>> #define REG_C2HEVT_MSG_TEST 0x01B8
>> -#define REG_C2HEVT_CLEAR 0x01BF
>> #define REG_MCUTST_1 0x01c0
>> #define REG_FMETHR 0x01C8
>> #define REG_HMETFR 0x01CC
>> @@ -231,7 +231,7 @@
>> #define REG_RD_NAV_NXT 0x0544
>> #define REG_NAV_PROT_LEN 0x0546
>> #define REG_BCN_CTRL 0x0550
>> -#define REG_USTIME_TSF 0x0551
>> +#define REG_BCN_CTRL_1 0x0551
>> #define REG_MBID_NUM 0x0552
>> #define REG_DUAL_TSF_RST 0x0553
>> #define REG_BCN_INTERVAL 0x0554
>>
>