The messages are currently hard coding "1ms", which does not match
the actual timeout being used.
Signed-off-by: Robert Shade <[email protected]>
---
drivers/net/wireless/ath/ath9k/ar9002_calib.c | 9 ++++++---
drivers/net/wireless/ath/ath9k/ar9003_calib.c | 3 ++-
2 files changed, 8 insertions(+), 4 deletions(-)
diff --git a/drivers/net/wireless/ath/ath9k/ar9002_calib.c
b/drivers/net/wireless/ath/ath9k/ar9002_calib.c
index c55e5bb..9f58974 100644
--- a/drivers/net/wireless/ath/ath9k/ar9002_calib.c
+++ b/drivers/net/wireless/ath/ath9k/ar9002_calib.c
@@ -731,7 +731,8 @@ static bool ar9285_hw_cl_cal(struct ath_hw *ah,
struct ath9k_channel *chan)
if (!ath9k_hw_wait(ah, AR_PHY_AGC_CONTROL,
AR_PHY_AGC_CONTROL_CAL, 0, AH_WAIT_TIMEOUT)) {
ath_dbg(common, CALIBRATE,
- "offset calibration failed to complete in 1ms; noisy environment?\n");
+ "offset calibration failed to complete in %d ms; noisy environment?\n",
+ AH_WAIT_TIMEOUT / 1000);
return false;
}
REG_CLR_BIT(ah, AR_PHY_TURBO, AR_PHY_FC_DYN2040_EN);
@@ -745,7 +746,8 @@ static bool ar9285_hw_cl_cal(struct ath_hw *ah,
struct ath9k_channel *chan)
if (!ath9k_hw_wait(ah, AR_PHY_AGC_CONTROL, AR_PHY_AGC_CONTROL_CAL,
0, AH_WAIT_TIMEOUT)) {
ath_dbg(common, CALIBRATE,
- "offset calibration failed to complete in 1ms; noisy environment?\n");
+ "offset calibration failed to complete in %d ms; noisy environment?\n",
+ AH_WAIT_TIMEOUT / 1000);
return false;
}
@@ -841,7 +843,8 @@ static bool ar9002_hw_init_cal(struct ath_hw *ah,
struct ath9k_channel *chan)
AR_PHY_AGC_CONTROL_CAL,
0, AH_WAIT_TIMEOUT)) {
ath_dbg(common, CALIBRATE,
- "offset calibration failed to complete in 1ms; noisy environment?\n");
+ "offset calibration failed to complete in %d ms; noisy environment?\n",
+ AH_WAIT_TIMEOUT / 1000);
return false;
}
diff --git a/drivers/net/wireless/ath/ath9k/ar9003_calib.c
b/drivers/net/wireless/ath/ath9k/ar9003_calib.c
index f76c3ca..639ba7d 100644
--- a/drivers/net/wireless/ath/ath9k/ar9003_calib.c
+++ b/drivers/net/wireless/ath/ath9k/ar9003_calib.c
@@ -1126,7 +1126,8 @@ skip_tx_iqcal:
ar9003_hw_rtt_disable(ah);
ath_dbg(common, CALIBRATE,
- "offset calibration failed to complete in 1ms; noisy environment?\n");
+ "offset calibration failed to complete in %d ms; noisy environment?\n",
+ AH_WAIT_TIMEOUT / 1000);
return false;
}
--
1.7.1