Hi,
I managed to get Wifi working on a imx7 warp board, which has a BCM43430 device.
I used the firmware from the RaspberryPi repository:
https://github.com/RPi-Distro/firmware-nonfree/tree/master/brcm80211/brcm
Are there any plans to make brcmfmac43430-sdio.bin available in the
official linux-firmware repository?
Thanks,
Fabio Estevam
Hi Arend,
On Sat, Aug 6, 2016 at 12:15 PM, Fabio Estevam <[email protected]> wrote:
> Hi,
>
> I managed to get Wifi working on a imx7 warp board, which has a BCM43430 device.
>
> I used the firmware from the RaspberryPi repository:
> https://github.com/RPi-Distro/firmware-nonfree/tree/master/brcm80211/brcm
>
> Are there any plans to make brcmfmac43430-sdio.bin available in the
> official linux-firmware repository?
Is this something you could help?
Thanks
Hi Arend,
On Wed, Aug 24, 2016 at 4:22 PM, Arend Van Spriel
<[email protected]> wrote:
>> Is this something you could help?
>
> I could, but this is handled by Cypress now. I have asked for firmware
> release tag so I can release it.
Excellent, thanks for your help!
On 24-8-2016 21:13, Fabio Estevam wrote:
> Hi Arend,
>
> On Sat, Aug 6, 2016 at 12:15 PM, Fabio Estevam <[email protected]> wrote:
>> Hi,
>>
>> I managed to get Wifi working on a imx7 warp board, which has a BCM43430 device.
>>
>> I used the firmware from the RaspberryPi repository:
>> https://github.com/RPi-Distro/firmware-nonfree/tree/master/brcm80211/brcm
>>
>> Are there any plans to make brcmfmac43430-sdio.bin available in the
>> official linux-firmware repository?
>
> Is this something you could help?
I could, but this is handled by Cypress now. I have asked for firmware
release tag so I can release it.
Regards,
Arend
Hi Arend,
On Wed, Aug 24, 2016 at 4:22 PM, Arend Van Spriel
<[email protected]> wrote:
> I could, but this is handled by Cypress now. I have asked for firmware
> release tag so I can release it.
I see brcmfmac43430-sdio.bin in linux-firmware git tree now.
Thanks a lot for your help!
Hi Arend,
On Wed, Aug 24, 2016 at 4:22 PM, Arend Van Spriel
<[email protected]> wrote:
> I could, but this is handled by Cypress now. I have asked for firmware
> release tag so I can release it.
Have you had a chance to release brcmfmac43430-sdio.bin?
Thanks!