From: Hemantkumar Suthar <[email protected]>
This patch adds support for 8977 chipset to mwifiex with SDIO
interface. Register offsets and supported feature flags are
updated. Firmware image used will be mrvl/sd8977_uapsta.bin.
Signed-off-by: Hemantkumar Suthar <[email protected]>
Signed-off-by: Rakesh Parmar <[email protected]>
Signed-off-by: Cathy Luo <[email protected]>
Signed-off-by: Ganapathi Bhat <[email protected]>
---
drivers/net/wireless/marvell/mwifiex/Kconfig | 2 +-
drivers/net/wireless/marvell/mwifiex/sdio.c | 5 ++
drivers/net/wireless/marvell/mwifiex/sdio.h | 70 ++++++++++++++++++++++++++++
3 files changed, 76 insertions(+), 1 deletion(-)
diff --git a/drivers/net/wireless/marvell/mwifiex/Kconfig b/drivers/net/wireless/marvell/mwifiex/Kconfig
index 279167d..524fd56 100644
--- a/drivers/net/wireless/marvell/mwifiex/Kconfig
+++ b/drivers/net/wireless/marvell/mwifiex/Kconfig
@@ -9,7 +9,7 @@ config MWIFIEX
mwifiex.
config MWIFIEX_SDIO
- tristate "Marvell WiFi-Ex Driver for SD8786/SD8787/SD8797/SD8887/SD8897/SD8997"
+ tristate "Marvell WiFi-Ex Driver for SD8786/SD8787/SD8797/SD8887/SD8897/SD8977/SD8997"
depends on MWIFIEX && MMC
select FW_LOADER
select WANT_DEV_COREDUMP
diff --git a/drivers/net/wireless/marvell/mwifiex/sdio.c b/drivers/net/wireless/marvell/mwifiex/sdio.c
index d49fbd5..a856483 100644
--- a/drivers/net/wireless/marvell/mwifiex/sdio.c
+++ b/drivers/net/wireless/marvell/mwifiex/sdio.c
@@ -489,6 +489,8 @@ static void mwifiex_sdio_coredump(struct device *dev)
#define SDIO_DEVICE_ID_MARVELL_8887 (0x9135)
/* Device ID for SD8801 */
#define SDIO_DEVICE_ID_MARVELL_8801 (0x9139)
+/* Device ID for SD8977 */
+#define SDIO_DEVICE_ID_MARVELL_8977 (0x9145)
/* Device ID for SD8997 */
#define SDIO_DEVICE_ID_MARVELL_8997 (0x9141)
@@ -507,6 +509,8 @@ static void mwifiex_sdio_coredump(struct device *dev)
.driver_data = (unsigned long)&mwifiex_sdio_sd8887},
{SDIO_DEVICE(SDIO_VENDOR_ID_MARVELL, SDIO_DEVICE_ID_MARVELL_8801),
.driver_data = (unsigned long)&mwifiex_sdio_sd8801},
+ {SDIO_DEVICE(SDIO_VENDOR_ID_MARVELL, SDIO_DEVICE_ID_MARVELL_8977),
+ .driver_data = (unsigned long)&mwifiex_sdio_sd8977},
{SDIO_DEVICE(SDIO_VENDOR_ID_MARVELL, SDIO_DEVICE_ID_MARVELL_8997),
.driver_data = (unsigned long)&mwifiex_sdio_sd8997},
{},
@@ -2726,4 +2730,5 @@ static void mwifiex_sdio_up_dev(struct mwifiex_adapter *adapter)
MODULE_FIRMWARE(SD8797_DEFAULT_FW_NAME);
MODULE_FIRMWARE(SD8897_DEFAULT_FW_NAME);
MODULE_FIRMWARE(SD8887_DEFAULT_FW_NAME);
+MODULE_FIRMWARE(SD8977_DEFAULT_FW_NAME);
MODULE_FIRMWARE(SD8997_DEFAULT_FW_NAME);
diff --git a/drivers/net/wireless/marvell/mwifiex/sdio.h b/drivers/net/wireless/marvell/mwifiex/sdio.h
index dccf7fd..912de2c 100644
--- a/drivers/net/wireless/marvell/mwifiex/sdio.h
+++ b/drivers/net/wireless/marvell/mwifiex/sdio.h
@@ -36,6 +36,7 @@
#define SD8897_DEFAULT_FW_NAME "mrvl/sd8897_uapsta.bin"
#define SD8887_DEFAULT_FW_NAME "mrvl/sd8887_uapsta.bin"
#define SD8801_DEFAULT_FW_NAME "mrvl/sd8801_uapsta.bin"
+#define SD8977_DEFAULT_FW_NAME "mrvl/sd8977_uapsta.bin"
#define SD8997_DEFAULT_FW_NAME "mrvl/sd8997_uapsta.bin"
#define BLOCK_MODE 1
@@ -371,6 +372,59 @@ struct mwifiex_sdio_device {
0x59, 0x5c, 0x5d},
};
+static const struct mwifiex_sdio_card_reg mwifiex_reg_sd8977 = {
+ .start_rd_port = 0,
+ .start_wr_port = 0,
+ .base_0_reg = 0xF8,
+ .base_1_reg = 0xF9,
+ .poll_reg = 0x5C,
+ .host_int_enable = UP_LD_HOST_INT_MASK | DN_LD_HOST_INT_MASK |
+ CMD_PORT_UPLD_INT_MASK | CMD_PORT_DNLD_INT_MASK,
+ .host_int_rsr_reg = 0x4,
+ .host_int_status_reg = 0x0C,
+ .host_int_mask_reg = 0x08,
+ .status_reg_0 = 0xE8,
+ .status_reg_1 = 0xE9,
+ .sdio_int_mask = 0xff,
+ .data_port_mask = 0xffffffff,
+ .io_port_0_reg = 0xE4,
+ .io_port_1_reg = 0xE5,
+ .io_port_2_reg = 0xE6,
+ .max_mp_regs = 196,
+ .rd_bitmap_l = 0x10,
+ .rd_bitmap_u = 0x11,
+ .rd_bitmap_1l = 0x12,
+ .rd_bitmap_1u = 0x13,
+ .wr_bitmap_l = 0x14,
+ .wr_bitmap_u = 0x15,
+ .wr_bitmap_1l = 0x16,
+ .wr_bitmap_1u = 0x17,
+ .rd_len_p0_l = 0x18,
+ .rd_len_p0_u = 0x19,
+ .card_misc_cfg_reg = 0xd8,
+ .card_cfg_2_1_reg = 0xd9,
+ .cmd_rd_len_0 = 0xc0,
+ .cmd_rd_len_1 = 0xc1,
+ .cmd_rd_len_2 = 0xc2,
+ .cmd_rd_len_3 = 0xc3,
+ .cmd_cfg_0 = 0xc4,
+ .cmd_cfg_1 = 0xc5,
+ .cmd_cfg_2 = 0xc6,
+ .cmd_cfg_3 = 0xc7,
+ .fw_dump_host_ready = 0xcc,
+ .fw_dump_ctrl = 0xf0,
+ .fw_dump_start = 0xf1,
+ .fw_dump_end = 0xf8,
+ .func1_dump_reg_start = 0x10,
+ .func1_dump_reg_end = 0x17,
+ .func1_scratch_reg = 0xe8,
+ .func1_spec_reg_num = 13,
+ .func1_spec_reg_table = {0x08, 0x58, 0x5C, 0x5D,
+ 0x60, 0x61, 0x62, 0x64,
+ 0x65, 0x66, 0x68, 0x69,
+ 0x6a},
+};
+
static const struct mwifiex_sdio_card_reg mwifiex_reg_sd8997 = {
.start_rd_port = 0,
.start_wr_port = 0,
@@ -532,6 +586,22 @@ struct mwifiex_sdio_device {
.can_ext_scan = true,
};
+static const struct mwifiex_sdio_device mwifiex_sdio_sd8977 = {
+ .firmware = SD8977_DEFAULT_FW_NAME,
+ .reg = &mwifiex_reg_sd8977,
+ .max_ports = 32,
+ .mp_agg_pkt_limit = 16,
+ .tx_buf_size = MWIFIEX_TX_DATA_BUF_SIZE_4K,
+ .mp_tx_agg_buf_size = MWIFIEX_MP_AGGR_BUF_SIZE_MAX,
+ .mp_rx_agg_buf_size = MWIFIEX_MP_AGGR_BUF_SIZE_MAX,
+ .supports_sdio_new_mode = true,
+ .has_control_mask = false,
+ .can_dump_fw = true,
+ .fw_dump_enh = true,
+ .can_auto_tdls = false,
+ .can_ext_scan = true,
+};
+
static const struct mwifiex_sdio_device mwifiex_sdio_sd8997 = {
.firmware = SD8997_DEFAULT_FW_NAME,
.reg = &mwifiex_reg_sd8997,
--
1.9.1
Ganapathi Bhat <[email protected]> writes:
> From: Hemantkumar Suthar <[email protected]>
>
> This patch adds support for 8977 chipset to mwifiex with SDIO
> interface. Register offsets and supported feature flags are
> updated. Firmware image used will be mrvl/sd8977_uapsta.bin.
>
> Signed-off-by: Hemantkumar Suthar <[email protected]>
> Signed-off-by: Rakesh Parmar <[email protected]>
> Signed-off-by: Cathy Luo <[email protected]>
> Signed-off-by: Ganapathi Bhat <[email protected]>
Changelog missing:
https://wireless.wiki.kernel.org/en/developers/documentation/submittingpatches#changelog_missing
But no need to resend, just reply to this mail and explain what changed
from v2.
--
Kalle Valo
Hi Kalle,
> Subject: Re: [PATCH v3] mwifiex: add support for sd8977 chipset
>
> Ganapathi Bhat <[email protected]> writes:
>
> > From: Hemantkumar Suthar <[email protected]>
> >
> > This patch adds support for 8977 chipset to mwifiex with SDIO
> > interface. Register offsets and supported feature flags are updated.
> > Firmware image used will be mrvl/sd8977_uapsta.bin.
> >
> > Signed-off-by: Hemantkumar Suthar <[email protected]>
> > Signed-off-by: Rakesh Parmar <[email protected]>
> > Signed-off-by: Cathy Luo <[email protected]>
> > Signed-off-by: Ganapathi Bhat <[email protected]>
>
> Changelog missing:
>
> https://wireless.wiki.kernel.org/en/developers/documentation/submittingp
> atches#changelog_missing
>
> But no need to resend, just reply to this mail and explain what changed from
> v2.
v3: Remove commit ID('From a0f96e63...') in v2
>
Regards,
Ganapathi
Ganapathi Bhat <[email protected]> wrote:
> From: Hemantkumar Suthar <[email protected]>
>
> This patch adds support for 8977 chipset to mwifiex with SDIO
> interface. Register offsets and supported feature flags are
> updated. Firmware image used will be mrvl/sd8977_uapsta.bin.
>
> Signed-off-by: Hemantkumar Suthar <[email protected]>
> Signed-off-by: Rakesh Parmar <[email protected]>
> Signed-off-by: Cathy Luo <[email protected]>
> Signed-off-by: Ganapathi Bhat <[email protected]>
Patch applied to wireless-drivers-next.git, thanks.
1a0f547831dc mwifiex: add support for sd8977 chipset
--
https://patchwork.kernel.org/patch/10755375/
https://wireless.wiki.kernel.org/en/developers/documentation/submittingpatches