2014-11-18 22:51:15

by Dmitry Tunin

Subject: [PATCH v2] ath3k: Add support of MCI 13d3:3408 bt device

Add support for bluetooth MCI WB335 (AR9565) Wi-Fi+bt module.
It is AR3011 device according to iProduct == 0.
So btusb should be blacklisted
I submitted a wrong patch before asif it was an AR3012 device,
but it works both ways. This is the right one.

Signed-off-by: Dmitry Tunin <[email protected]>
are */

---

diff --git a/drivers/bluetooth/ath3k.c b/drivers/bluetooth/ath3k.c
index d85ced2..3b53116 100644
--- a/drivers/bluetooth/ath3k.c
+++ b/drivers/bluetooth/ath3k.c
@@ -69,6 +69,7 @@ static const struct usb_device_id ath3k_table[] = {
{ USB_DEVICE(0x0CF3, 0x3002) },
{ USB_DEVICE(0x0CF3, 0xE019) },
{ USB_DEVICE(0x13d3, 0x3304) },
+ { USB_DEVICE(0x13d3, 0x3408) },

/* Atheros AR9285 Malbec with sflash firmware */
{ USB_DEVICE(0x03F0, 0x311D) },
diff --git a/drivers/bluetooth/btusb.c b/drivers/bluetooth/btusb.c
index edfc17b..bbf5c1c 100644
--- a/drivers/bluetooth/btusb.c
+++ b/drivers/bluetooth/btusb.c
@@ -146,6 +146,7 @@ static const struct usb_device_id blacklist_table[] = {
{ USB_DEVICE(0x0cf3, 0x3002), .driver_info = BTUSB_IGNORE },
{ USB_DEVICE(0x0cf3, 0xe019), .driver_info = BTUSB_IGNORE },
{ USB_DEVICE(0x13d3, 0x3304), .driver_info = BTUSB_IGNORE },
+ { USB_DEVICE(0x13d3, 0x3408), .driver_info = BTUSB_IGNORE },

/* Atheros AR9285 Malbec with sflash firmware */
{ USB_DEVICE(0x03f0, 0x311d), .driver_info = BTUSB_IGNORE },

2014-11-18 22:56:19

by Marcel Holtmann

Subject: Re: [PATCH v2] ath3k: Add support of MCI 13d3:3408 bt device

Hi Dmitry,

> Add support for bluetooth MCI WB335 (AR9565) Wi-Fi+bt module.
> It is AR3011 device according to iProduct == 0.
> So btusb should be blacklisted
> I submitted a wrong patch before asif it was an AR3012 device,
> but it works both ways. This is the right one.

include the device details from /sys/kernel/debug/usb/devices.

>
> Signed-off-by: Dmitry Tunin <[email protected]>
> are */

No idea what this are */ is.

>
> ---
>
> diff --git a/drivers/bluetooth/ath3k.c b/drivers/bluetooth/ath3k.c
> index d85ced2..3b53116 100644
> --- a/drivers/bluetooth/ath3k.c
> +++ b/drivers/bluetooth/ath3k.c
> @@ -69,6 +69,7 @@ static const struct usb_device_id ath3k_table[] = {
> { USB_DEVICE(0x0CF3, 0x3002) },
> { USB_DEVICE(0x0CF3, 0xE019) },
> { USB_DEVICE(0x13d3, 0x3304) },
> + { USB_DEVICE(0x13d3, 0x3408) },
>
> /* Atheros AR9285 Malbec with sflash firmware */
> { USB_DEVICE(0x03F0, 0x311D) },
> diff --git a/drivers/bluetooth/btusb.c b/drivers/bluetooth/btusb.c
> index edfc17b..bbf5c1c 100644
> --- a/drivers/bluetooth/btusb.c
> +++ b/drivers/bluetooth/btusb.c
> @@ -146,6 +146,7 @@ static const struct usb_device_id blacklist_table[] = {
> { USB_DEVICE(0x0cf3, 0x3002), .driver_info = BTUSB_IGNORE },
> { USB_DEVICE(0x0cf3, 0xe019), .driver_info = BTUSB_IGNORE },
> { USB_DEVICE(0x13d3, 0x3304), .driver_info = BTUSB_IGNORE },
> + { USB_DEVICE(0x13d3, 0x3408), .driver_info = BTUSB_IGNORE },

Fix whitespace here or use a proper mail client.

Regards

Marcel

2014-11-19 06:46:42

by Dmitry Tunin

Subject: Re: [PATCH v3] ath3k: Add support of MCI 13d3:3408 bt device

Hi Marcel,

Here is information from /sys/kernel/debug/usb/devices

T: Bus=01 Lev=02 Prnt=03 Port=00 Cnt=01 Dev#= 20 Spd=12 MxCh= 0
D: Ver= 1.10 Cls=e0(wlcon) Sub=01 Prot=01 MxPS=64 #Cfgs= 1
P: Vendor=13d3 ProdID=3408 Rev= 0.02
C:* #Ifs= 2 Cfg#= 1 Atr=e0 MxPwr=100mA
A: FirstIf#= 0 IfCount= 2 Cls=e0(wlcon) Sub=01 Prot=01
I:* If#= 0 Alt= 0 #EPs= 3 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E: Ad=81(I) Atr=03(Int.) MxPS= 16 Ivl=1ms
E: Ad=82(I) Atr=02(Bulk) MxPS= 64 Ivl=0ms
E: Ad=02(O) Atr=02(Bulk) MxPS= 64 Ivl=0ms
I:* If#= 1 Alt= 0 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E: Ad=83(I) Atr=01(Isoc) MxPS= 0 Ivl=1ms
E: Ad=03(O) Atr=01(Isoc) MxPS= 0 Ivl=1ms
I: If#= 1 Alt= 1 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E: Ad=83(I) Atr=01(Isoc) MxPS= 9 Ivl=1ms
E: Ad=03(O) Atr=01(Isoc) MxPS= 9 Ivl=1ms
I: If#= 1 Alt= 2 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E: Ad=83(I) Atr=01(Isoc) MxPS= 17 Ivl=1ms
E: Ad=03(O) Atr=01(Isoc) MxPS= 17 Ivl=1ms
I: If#= 1 Alt= 3 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E: Ad=83(I) Atr=01(Isoc) MxPS= 25 Ivl=1ms
E: Ad=03(O) Atr=01(Isoc) MxPS= 25 Ivl=1ms
I: If#= 1 Alt= 4 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E: Ad=83(I) Atr=01(Isoc) MxPS= 33 Ivl=1ms
E: Ad=03(O) Atr=01(Isoc) MxPS= 33 Ivl=1ms
I: If#= 1 Alt= 5 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E: Ad=83(I) Atr=01(Isoc) MxPS= 49 Ivl=1ms
E: Ad=03(O) Atr=01(Isoc) MxPS= 49 Ivl=1ms


I hope this mail client is OK now.

Add support for bluetooth MCI WB335 (AR9565) Wi-Fi+bt module.
It is AR3011 device according to iProduct == 0.
So btusb should be blacklisted
I submitted a wrong patch before asif it was an AR3012 device,
but it works both ways. This is the right one.

Signed-off-by: Dmitry Tunin<[email protected]>

---

diff --git a/drivers/bluetooth/ath3k.c b/drivers/bluetooth/ath3k.c
index d85ced2..3b53116 100644
--- a/drivers/bluetooth/ath3k.c
+++ b/drivers/bluetooth/ath3k.c
@@ -69,6 +69,7 @@ static const struct usb_device_id ath3k_table[] = {
{ USB_DEVICE(0x0CF3, 0x3002) },
{ USB_DEVICE(0x0CF3, 0xE019) },
{ USB_DEVICE(0x13d3, 0x3304) },
+ { USB_DEVICE(0x13d3, 0x3408) },

/* Atheros AR9285 Malbec with sflash firmware */
{ USB_DEVICE(0x03F0, 0x311D) },
diff --git a/drivers/bluetooth/btusb.c b/drivers/bluetooth/btusb.c
index edfc17b..bbf5c1c 100644
--- a/drivers/bluetooth/btusb.c
+++ b/drivers/bluetooth/btusb.c
@@ -146,6 +146,7 @@ static const struct usb_device_id blacklist_table[] = {
{ USB_DEVICE(0x0cf3, 0x3002), .driver_info = BTUSB_IGNORE },
{ USB_DEVICE(0x0cf3, 0xe019), .driver_info = BTUSB_IGNORE },
{ USB_DEVICE(0x13d3, 0x3304), .driver_info = BTUSB_IGNORE },
+ { USB_DEVICE(0x13d3, 0x3408), .driver_info = BTUSB_IGNORE },

/* Atheros AR9285 Malbec with sflash firmware */
{ USB_DEVICE(0x03f0, 0x311d), .driver_info = BTUSB_IGNORE },


19.11.2014 01:56, Marcel Holtmann wrote:
> Hi Dmitry,
>
>> Add support for bluetooth MCI WB335 (AR9565) Wi-Fi+bt module.
>> It is AR3011 device according to iProduct == 0.
>> So btusb should be blacklisted
>> I submitted a wrong patch before asif it was an AR3012 device,
>> but it works both ways. This is the right one.
> include the device details from /sys/kernel/debug/usb/devices.
>
>> Signed-off-by: Dmitry Tunin <[email protected]>
>> are */
> No idea what this are */ is.
>
>> ---
>>
>> diff --git a/drivers/bluetooth/ath3k.c b/drivers/bluetooth/ath3k.c
>> index d85ced2..3b53116 100644
>> --- a/drivers/bluetooth/ath3k.c
>> +++ b/drivers/bluetooth/ath3k.c
>> @@ -69,6 +69,7 @@ static const struct usb_device_id ath3k_table[] = {
>> { USB_DEVICE(0x0CF3, 0x3002) },
>> { USB_DEVICE(0x0CF3, 0xE019) },
>> { USB_DEVICE(0x13d3, 0x3304) },
>> + { USB_DEVICE(0x13d3, 0x3408) },
>>
>> /* Atheros AR9285 Malbec with sflash firmware */
>> { USB_DEVICE(0x03F0, 0x311D) },
>> diff --git a/drivers/bluetooth/btusb.c b/drivers/bluetooth/btusb.c
>> index edfc17b..bbf5c1c 100644
>> --- a/drivers/bluetooth/btusb.c
>> +++ b/drivers/bluetooth/btusb.c
>> @@ -146,6 +146,7 @@ static const struct usb_device_id blacklist_table[] = {
>> { USB_DEVICE(0x0cf3, 0x3002), .driver_info = BTUSB_IGNORE },
>> { USB_DEVICE(0x0cf3, 0xe019), .driver_info = BTUSB_IGNORE },
>> { USB_DEVICE(0x13d3, 0x3304), .driver_info = BTUSB_IGNORE },
>> + { USB_DEVICE(0x13d3, 0x3408), .driver_info = BTUSB_IGNORE },
> Fix whitespace here or use a proper mail client.
>
> Regards
>
> Marcel
>