2021-08-27 17:09:30

by Chad Monroe

[permalink] [raw]
Subject: [PATCH 1/2] mt76: mt7615: fix STA mode connection on DFS channels

Only AP, adhoc and mesh mode needs to check CAC.
Stations, in particular, do not need this check.

Signed-off-by: Rubio Lu <[email protected]>
Signed-off-by: Ben Greear <[email protected]>
Signed-off-by: Chad Monroe <[email protected]>
---
.../net/wireless/mediatek/mt76/mt7615/mac.c | 38 +++++++++++++++++--
1 file changed, 35 insertions(+), 3 deletions(-)

diff --git a/drivers/net/wireless/mediatek/mt76/mt7615/mac.c b/drivers/net/wireless/mediatek/mt76/mt7615/mac.c
index ed1bba42a322..78b55e872da0 100644
--- a/drivers/net/wireless/mediatek/mt76/mt7615/mac.c
+++ b/drivers/net/wireless/mediatek/mt76/mt7615/mac.c
@@ -2153,6 +2153,32 @@ static int mt7615_dfs_start_radar_detector(struct mt7615_phy *phy)
return 0;
}

+struct mt7615_vif_counts {
+ u32 mesh;
+ u32 adhoc;
+ u32 ap;
+};
+
+static void
+mt7615_vif_counts(void *priv, u8 *mac, struct ieee80211_vif *vif)
+{
+ struct mt7615_vif_counts *counts = priv;
+
+ switch (vif->type) {
+ case NL80211_IFTYPE_ADHOC:
+ counts->adhoc++;
+ break;
+ case NL80211_IFTYPE_MESH_POINT:
+ counts->mesh++;
+ break;
+ case NL80211_IFTYPE_AP:
+ counts->ap++;
+ break;
+ default:
+ break;
+ }
+}
+
static int
mt7615_dfs_init_radar_specs(struct mt7615_phy *phy)
{
@@ -2196,6 +2222,7 @@ int mt7615_dfs_init_radar_detector(struct mt7615_phy *phy)
struct mt7615_dev *dev = phy->dev;
bool ext_phy = phy != &dev->phy;
int err;
+ struct mt7615_vif_counts counts = {0};

if (is_mt7663(&dev->mt76))
return 0;
@@ -2223,9 +2250,14 @@ int mt7615_dfs_init_radar_detector(struct mt7615_phy *phy)
phy->dfs_state = chandef->chan->dfs_state;

if (chandef->chan->flags & IEEE80211_CHAN_RADAR) {
- if (chandef->chan->dfs_state != NL80211_DFS_AVAILABLE)
- return mt7615_dfs_start_radar_detector(phy);
-
+ if (chandef->chan->dfs_state != NL80211_DFS_AVAILABLE) {
+ ieee80211_iterate_active_interfaces(phy->mt76->hw,
+ IEEE80211_IFACE_ITER_RESUME_ALL,
+ mt7615_vif_counts, &counts);
+ if (counts.ap + counts.adhoc + counts.mesh)
+ mt7615_dfs_start_radar_detector(phy);
+ return 0;
+ }
return mt7615_mcu_rdd_cmd(dev, RDD_CAC_END, ext_phy,
MT_RX_SEL0, 0);
}
--
2.20.1


2021-08-27 18:15:41

by Lorenzo Bianconi

[permalink] [raw]
Subject: Re: [PATCH 1/2] mt76: mt7615: fix STA mode connection on DFS channels

> Only AP, adhoc and mesh mode needs to check CAC.
> Stations, in particular, do not need this check.
>
> Signed-off-by: Rubio Lu <[email protected]>
> Signed-off-by: Ben Greear <[email protected]>
> Signed-off-by: Chad Monroe <[email protected]>
> ---
> .../net/wireless/mediatek/mt76/mt7615/mac.c | 38 +++++++++++++++++--
> 1 file changed, 35 insertions(+), 3 deletions(-)
>
> diff --git a/drivers/net/wireless/mediatek/mt76/mt7615/mac.c b/drivers/net/wireless/mediatek/mt76/mt7615/mac.c
> index ed1bba42a322..78b55e872da0 100644
> --- a/drivers/net/wireless/mediatek/mt76/mt7615/mac.c
> +++ b/drivers/net/wireless/mediatek/mt76/mt7615/mac.c
> @@ -2153,6 +2153,32 @@ static int mt7615_dfs_start_radar_detector(struct mt7615_phy *phy)
> return 0;
> }
>
> +struct mt7615_vif_counts {
> + u32 mesh;
> + u32 adhoc;
> + u32 ap;

I think u8 it is enough here. Moreover I think we can just count dfs_vif, what
do you think?

> +};
> +
> +static void
> +mt7615_vif_counts(void *priv, u8 *mac, struct ieee80211_vif *vif)
> +{
> + struct mt7615_vif_counts *counts = priv;
> +
> + switch (vif->type) {
> + case NL80211_IFTYPE_ADHOC:
> + counts->adhoc++;
> + break;
> + case NL80211_IFTYPE_MESH_POINT:
> + counts->mesh++;
> + break;
> + case NL80211_IFTYPE_AP:
> + counts->ap++;
> + break;
> + default:
> + break;
> + }
> +}
> +
> static int
> mt7615_dfs_init_radar_specs(struct mt7615_phy *phy)
> {
> @@ -2196,6 +2222,7 @@ int mt7615_dfs_init_radar_detector(struct mt7615_phy *phy)
> struct mt7615_dev *dev = phy->dev;
> bool ext_phy = phy != &dev->phy;
> int err;
> + struct mt7615_vif_counts counts = {0};
>
> if (is_mt7663(&dev->mt76))
> return 0;
> @@ -2223,9 +2250,14 @@ int mt7615_dfs_init_radar_detector(struct mt7615_phy *phy)
> phy->dfs_state = chandef->chan->dfs_state;
>
> if (chandef->chan->flags & IEEE80211_CHAN_RADAR) {
> - if (chandef->chan->dfs_state != NL80211_DFS_AVAILABLE)
> - return mt7615_dfs_start_radar_detector(phy);
> -
> + if (chandef->chan->dfs_state != NL80211_DFS_AVAILABLE) {
> + ieee80211_iterate_active_interfaces(phy->mt76->hw,
> + IEEE80211_IFACE_ITER_RESUME_ALL,
> + mt7615_vif_counts, &counts);
> + if (counts.ap + counts.adhoc + counts.mesh)
> + mt7615_dfs_start_radar_detector(phy);

here we are not considering the return value of
mt7615_dfs_start_radar_detector()

Regards,
Lorenzo

> + return 0;
> + }
> return mt7615_mcu_rdd_cmd(dev, RDD_CAC_END, ext_phy,
> MT_RX_SEL0, 0);
> }
> --
> 2.20.1
>


Attachments:
(No filename) (2.54 kB)
signature.asc (235.00 B)
Download all attachments