Hi Kalle,
here's my first pull request for 5.3
- Felix
The following changes since commit e5db0ad7563c38b7b329504836c9a64ae025a47a:
airo: switch to skcipher interface (2019-06-25 08:12:20 +0300)
are available in the Git repository at:
https://github.com/nbd168/wireless tags/mt76-for-kvalo-2019-06-27
for you to fetch changes up to 676fabd1d2f089f9fb8bece3476c2ab5584b4a1a:
mt76: mt7603: fix sparse warnings: warning: incorrect type in assignment (different base types) (2019-06-27 12:59:07 +0200)
----------------------------------------------------------------
mt76 patches for 5.3
* use NAPI polling for tx cleanup on mt7603/mt7615
* various fixes for mt7615
* unify some code between mt7603 and mt7615
* fix locking issues on mt76x02
* add support for toggling edcca on mt7603
* fix reading target tx power with ext PA on mt7603/mt7615
* fix initalizing channel maximum power
* fix rate control / tx status reporting issues on mt76x02/mt7603
* add support for eeprom calibration data from mtd on mt7615
* support configuring tx power on mt7615
* fix external PA support on mt76x0
* per-chain signal reporting on mt7615
* rx/tx buffer fixes for USB devices
----------------------------------------------------------------
Dan Carpenter (2):
mt76: Fix a signedness bug in mt7615_add_interface()
mt76: mt7615: Use after free in mt7615_mcu_set_bcn()
Felix Fietkau (7):
mt76: mt7603: fix reading target tx power from eeprom
mt76: fix setting chan->max_power
mt76: mt76x02: fix tx status reporting issues
mt76: mt76x02: fix tx reordering on rate control probing without a-mpdu
mt76: mt76x0: fix RF frontend initialization for external PA
mt76: mt7603: rework and fix tx status reporting
mt76: mt7603: improve hardware rate switching configuration
Lorenzo Bianconi (53):
mt76: mt76x02: remove useless return in mt76x02_resync_beacon_timer
mt76: move tx_napi in mt76_dev
mt76: mt7603: use napi polling for tx cleanup
mt76: mt7615: use napi polling for tx cleanup
mt76: move netif_napi_del in mt76_dma_cleanup
mt7615: mcu: simplify __mt7615_mcu_set_wtbl
mt7615: mcu: simplify __mt7615_mcu_set_sta_rec
mt7615: mcu: remove bss_info_convert_vif_type routine
mt7615: mcu: use proper msg size in mt7615_mcu_add_wtbl_bmc
mt7615: mcu: use proper msg size in mt7615_mcu_add_wtbl
mt7615: mcu: unify mt7615_mcu_add_wtbl_bmc and mt7615_mcu_del_wtbl_bmc
mt7615: mcu: remove unused parameter in mt7615_mcu_del_wtbl
mt7615: remove query from mt7615_mcu_msg_send signature
mt7615: remove dest from mt7615_mcu_msg_send signature
mt7615: mcu: remove skb_ret from mt7615_mcu_msg_send
mt7615: mcu: unify __mt7615_mcu_set_dev_info and mt7615_mcu_set_dev_info
mt7615: mcu: do not use function pointers whenever possible
mt7615: mcu: remove unused structure in mcu.h
mt7615: mcu: use standard signature for mt7615_mcu_msg_send
mt7615: initialize mt76_mcu_ops data structure
mt7615: mcu: init mcu_restart function pointer
mt7615: mcu: run __mt76_mcu_send_msg in mt7615_mcu_send_firmware
mt76: mt7603: stop mac80211 queues before setting the channel
mt76: mt7615: rearrange cleanup operations in mt7615_unregister_device
mt76: mt7615: add static qualifier to mt7615_rx_poll_complete
mt76: mt76x02: remove enable from mt76x02_edcca_init signature
mt76: mt76x2u: remove mt76x02_edcca_init in mt76x2u_set_channel
mt76: mt76x2: move mutex_lock inside mt76x2_set_channel
mt76: mt76x02: run mt76x02_edcca_init atomically in mt76_edcca_set
mt76: mt7603: add debugfs knob to enable/disable edcca
mt76: mt76x02: fix edcca file permission
mt76: mt7615: do not process rx packets if the device is not initialized
mt76: move mt76_insert_ccmp_hdr in mt76-module
mt76: mt7615: add support for mtd eeprom parsing
mt76: mt7615: select wifi band according to eeprom
mt76: generalize mt76_get_txpower for 4x4:4 devices
mt76: mt7615: add the capability to configure tx power
mt76: mt7615: init get_txpower mac80211 callback
mt76: mt7615: rearrange locking in mt7615_config
mt76: move mt76_get_rate in mt76-module
mt76: mt7615: remove unused variable in mt7615_mcu_set_bcn
mt76: mt7615: remove key check in mt7615_mcu_set_wtbl_key
mt76: mt7615: simplify mt7615_mcu_set_sta_rec routine
mt76: mt7615: init per-channel target power
mt76: mt7615: take into account extPA when configuring tx power
mt76: mt76x02u: fix sparse warnings: should it be static?
mt76: mt76u: reduce rx memory footprint
mt76: mt7615: remove cfg80211_chan_def from mt7615_set_channel signature
mt76: move nl80211_dfs_regions in mt76_dev data structure
mt76: mt76u: get rid of {out,in}_max_packet
mt76: mt7615: fix sparse warnings: incorrect type in assignment (different base types)
mt76: mt7615: fix sparse warnings: warning: cast from restricted __le16
mt76: mt7603: fix sparse warnings: warning: incorrect type in assignment (different base types)
Ryder Lee (5):
mt76: mt7615: enable support for mesh
mt76: mt7615: fix slow performance when enable encryption
mt76: mt7615: add support for per-chain signal strength reporting
mt76: mt7615: fix incorrect settings in mesh mode
mt76: mt7615: update peer's bssid when state transition occurs
YueHaibing (2):
mt76: mt7615: Make mt7615_irq_handler static
mt76: Remove set but not used variables 'pid' and 'final_mpdu'
drivers/net/wireless/mediatek/mt76/dma.c | 1 +
drivers/net/wireless/mediatek/mt76/mac80211.c | 62 ++++-
drivers/net/wireless/mediatek/mt76/mt76.h | 23 +-
drivers/net/wireless/mediatek/mt76/mt7603/core.c | 2 +-
drivers/net/wireless/mediatek/mt76/mt7603/debugfs.c | 30 +++
drivers/net/wireless/mediatek/mt76/mt7603/dma.c | 29 ++-
drivers/net/wireless/mediatek/mt76/mt7603/eeprom.h | 2 +
drivers/net/wireless/mediatek/mt76/mt7603/init.c | 26 +-
drivers/net/wireless/mediatek/mt76/mt7603/mac.c | 191 ++++++++-------
drivers/net/wireless/mediatek/mt76/mt7603/main.c | 8 +-
drivers/net/wireless/mediatek/mt76/mt7603/mcu.c | 2 +-
drivers/net/wireless/mediatek/mt76/mt7603/mt7603.h | 15 +-
drivers/net/wireless/mediatek/mt76/mt7603/regs.h | 6 +
drivers/net/wireless/mediatek/mt76/mt7615/dma.c | 23 +-
drivers/net/wireless/mediatek/mt76/mt7615/eeprom.c | 97 +++++++-
drivers/net/wireless/mediatek/mt76/mt7615/eeprom.h | 61 +++++
drivers/net/wireless/mediatek/mt76/mt7615/init.c | 77 +++++-
drivers/net/wireless/mediatek/mt76/mt7615/mac.c | 85 +++----
drivers/net/wireless/mediatek/mt76/mt7615/mac.h | 5 +
drivers/net/wireless/mediatek/mt76/mt7615/main.c | 52 ++--
drivers/net/wireless/mediatek/mt76/mt7615/mcu.c | 1265 ++++++++++++++++++++++++++++++++++++++++++++++-------------------------------------------------
drivers/net/wireless/mediatek/mt76/mt7615/mcu.h | 56 ++---
drivers/net/wireless/mediatek/mt76/mt7615/mt7615.h | 16 +-
drivers/net/wireless/mediatek/mt76/mt7615/pci.c | 7 +-
drivers/net/wireless/mediatek/mt76/mt76x0/init.c | 5 +-
drivers/net/wireless/mediatek/mt76/mt76x0/main.c | 2 +-
drivers/net/wireless/mediatek/mt76/mt76x0/phy.c | 13 +-
drivers/net/wireless/mediatek/mt76/mt76x0/usb.c | 2 +-
drivers/net/wireless/mediatek/mt76/mt76x02.h | 1 -
drivers/net/wireless/mediatek/mt76/mt76x02_beacon.c | 4 +-
drivers/net/wireless/mediatek/mt76/mt76x02_debugfs.c | 10 +-
drivers/net/wireless/mediatek/mt76/mt76x02_dfs.c | 18 +-
drivers/net/wireless/mediatek/mt76/mt76x02_dfs.h | 2 -
drivers/net/wireless/mediatek/mt76/mt76x02_eeprom.h | 1 +
drivers/net/wireless/mediatek/mt76/mt76x02_mac.c | 106 ++++++--
drivers/net/wireless/mediatek/mt76/mt76x02_mac.h | 2 +-
drivers/net/wireless/mediatek/mt76/mt76x02_mmio.c | 18 +-
drivers/net/wireless/mediatek/mt76/mt76x02_regs.h | 3 +
drivers/net/wireless/mediatek/mt76/mt76x02_txrx.c | 9 +-
drivers/net/wireless/mediatek/mt76/mt76x02_usb_core.c | 11 +-
drivers/net/wireless/mediatek/mt76/mt76x2/init.c | 9 +-
drivers/net/wireless/mediatek/mt76/mt76x2/pci_main.c | 16 +-
drivers/net/wireless/mediatek/mt76/mt76x2/pci_phy.c | 8 +-
drivers/net/wireless/mediatek/mt76/mt76x2/usb_init.c | 2 +-
drivers/net/wireless/mediatek/mt76/mt76x2/usb_main.c | 23 +-
drivers/net/wireless/mediatek/mt76/mt76x2/usb_phy.c | 7 +-
drivers/net/wireless/mediatek/mt76/usb.c | 20 +-
47 files changed, 1422 insertions(+), 1011 deletions(-)
Felix Fietkau <[email protected]> writes:
> Hi Kalle,
>
> here's my first pull request for 5.3
>
> - Felix
>
> The following changes since commit e5db0ad7563c38b7b329504836c9a64ae025a47a:
>
> airo: switch to skcipher interface (2019-06-25 08:12:20 +0300)
>
> are available in the Git repository at:
>
> https://github.com/nbd168/wireless tags/mt76-for-kvalo-2019-06-27
>
> for you to fetch changes up to 676fabd1d2f089f9fb8bece3476c2ab5584b4a1a:
>
> mt76: mt7603: fix sparse warnings: warning: incorrect type in assignment (different base types) (2019-06-27 12:59:07 +0200)
>
> ----------------------------------------------------------------
> mt76 patches for 5.3
>
> * use NAPI polling for tx cleanup on mt7603/mt7615
> * various fixes for mt7615
> * unify some code between mt7603 and mt7615
> * fix locking issues on mt76x02
> * add support for toggling edcca on mt7603
> * fix reading target tx power with ext PA on mt7603/mt7615
> * fix initalizing channel maximum power
> * fix rate control / tx status reporting issues on mt76x02/mt7603
> * add support for eeprom calibration data from mtd on mt7615
> * support configuring tx power on mt7615
> * fix external PA support on mt76x0
> * per-chain signal reporting on mt7615
> * rx/tx buffer fixes for USB devices
>
> ----------------------------------------------------------------
Pulled, thanks.
--
Kalle Valo