Signed-off-by: Rafał Miłecki <[email protected]>
---
Uh, bigger one. This patch causes false warning:
drivers/net/wireless/b43/phy_n.c: In function ‘b43_nphy_rev2_cal_rx_iq’:
drivers/net/wireless/b43/phy_n.c:627: warning: large integer implicitly truncated to unsigned type
That's for:
b43_phy_maskset(dev, B43_NPHY_RFSEQCA, ~B43_NPHY_RFSEQCA_RXDIS, ((1 - i) << B43_NPHY_RFSEQCA_RXDIS_SHIFT));
It's inside loop i=0,1. I tried casting i on (u8) but this didn't help. Can we leave this? Or can sb share some trick to avoid this warning?
---
drivers/net/wireless/b43/phy_n.c | 194 +++++++++++++++++++++++++++++++++++++-
drivers/net/wireless/b43/phy_n.h | 1 +
2 files changed, 194 insertions(+), 1 deletions(-)
diff --git a/drivers/net/wireless/b43/phy_n.c b/drivers/net/wireless/b43/phy_n.c
index ea1af25..82c53b9 100644
--- a/drivers/net/wireless/b43/phy_n.c
+++ b/drivers/net/wireless/b43/phy_n.c
@@ -568,6 +568,198 @@ static void b43_nphy_tx_iq_workaround(struct b43_wldev *dev)
b43_shm_write16(dev, B43_SHM_SHARED, 0x0706, array[3]);
}
+/* http://bcm-v4.sipsolutions.net/802.11/PHY/N/CalRxIqRev2 */
+static int b43_nphy_rev2_cal_rx_iq(struct b43_wldev *dev,
+ struct nphy_txgains target, u8 type, bool debug)
+{
+ struct b43_phy_n *nphy = dev->phy.n;
+ int i, j, index;
+ u8 rfctl[2];
+ u8 afectl_core;
+ u16 tmp[6];
+ u16 cur_hpf1, cur_hpf2, cur_lna;
+ u32 real, imag;
+ enum ieee80211_band band;
+
+ u8 use;
+ u16 cur_hpf;
+ u16 lna[3] = { 3, 3, 1 };
+ u16 hpf1[3] = { 7, 2, 0 };
+ u16 hpf2[3] = { 2, 0, 0 };
+ u32 power[3];
+ u16 gain_save[2];
+ u16 cal_gain[2];
+ struct nphy_iqcal_params cal_params[2];
+ struct nphy_iq_est est;
+ int ret = 0;
+ bool playtone = true;
+ int desired = 13;
+
+ b43_nphy_stay_in_carrier_search(dev, 1);
+
+ if (dev->phy.rev < 2)
+ ;//TODO: Call N PHY Reapply TX Cal Coeffs
+ //TODO: Read an N PHY Table with ID 7, length 2, offset 0x110, width 16, and data gain_save
+ for (i = 0; i < 2; i++) {
+ b43_nphy_iq_cal_gain_params(dev, i, target, &cal_params[i]);
+ cal_gain[i] = cal_params[i].cal_gain;
+ }
+ //TODO: Write an N PHY Table with ID 7, length 2, offset 0x110, width 16, and data from cal_gain
+
+ for (i = 0; i < 2; i++) {
+ if (i == 0) {
+ rfctl[0] = B43_NPHY_RFCTL_INTC1;
+ rfctl[1] = B43_NPHY_RFCTL_INTC2;
+ afectl_core = B43_NPHY_AFECTL_C1;
+ } else {
+ rfctl[0] = B43_NPHY_RFCTL_INTC2;
+ rfctl[1] = B43_NPHY_RFCTL_INTC1;
+ afectl_core = B43_NPHY_AFECTL_C2;
+ }
+
+ tmp[1] = b43_phy_read(dev, B43_NPHY_RFSEQCA);
+ tmp[2] = b43_phy_read(dev, afectl_core);
+ tmp[3] = b43_phy_read(dev, B43_NPHY_AFECTL_OVER);
+ tmp[4] = b43_phy_read(dev, rfctl[0]);
+ tmp[5] = b43_phy_read(dev, rfctl[1]);
+
+ b43_phy_maskset(dev, B43_NPHY_RFSEQCA, ~B43_NPHY_RFSEQCA_RXDIS,
+ ((1 - i) << B43_NPHY_RFSEQCA_RXDIS_SHIFT));
+ b43_phy_maskset(dev, B43_NPHY_RFSEQCA, ~B43_NPHY_RFSEQCA_TXEN,
+ (1 - i));
+ b43_phy_set(dev, afectl_core, 0x0006);
+ b43_phy_set(dev, B43_NPHY_AFECTL_OVER, 0x0006);
+
+ band = b43_current_band(dev->wl);
+
+ if (nphy->rxcalparams & 0xFF000000) {
+ if (band == IEEE80211_BAND_5GHZ)
+ b43_phy_write(dev, rfctl[0], 0x140);
+ else
+ b43_phy_write(dev, rfctl[0], 0x110);
+ } else {
+ if (band == IEEE80211_BAND_5GHZ)
+ b43_phy_write(dev, rfctl[0], 0x180);
+ else
+ b43_phy_write(dev, rfctl[0], 0x120);
+ }
+
+ if (band == IEEE80211_BAND_5GHZ)
+ b43_phy_write(dev, rfctl[1], 0x148);
+ else
+ b43_phy_write(dev, rfctl[1], 0x114);
+
+ if (nphy->rxcalparams & 0x10000) {
+ b43_radio_maskset(dev, B2055_C1_GENSPARE2, 0xFC,
+ (i + 1));
+ b43_radio_maskset(dev, B2055_C2_GENSPARE2, 0xFC,
+ (2 - i));
+ }
+
+ for (j = 0; i < 4; j++) {
+ if (j < 3) {
+ cur_lna = lna[j];
+ cur_hpf1 = hpf1[j];
+ cur_hpf2 = hpf2[j];
+ } else {
+ if (power[1] > 10000) {
+ use = 1;
+ cur_hpf = cur_hpf1;
+ index = 2;
+ } else {
+ if (power[0] > 10000) {
+ use = 1;
+ cur_hpf = cur_hpf1;
+ index = 1;
+ } else {
+ index = 0;
+ use = 2;
+ cur_hpf = cur_hpf2;
+ }
+ }
+ cur_lna = lna[index];
+ cur_hpf1 = hpf1[index];
+ cur_hpf2 = hpf2[index];
+ cur_hpf += desired - hweight32(power[index]);
+ cur_hpf = clamp_val(cur_hpf, 0, 10);
+ if (use == 1)
+ cur_hpf1 = cur_hpf;
+ else
+ cur_hpf2 = cur_hpf;
+ }
+
+ tmp[0] = ((cur_hpf2 << 8) | (cur_hpf1 << 4) |
+ (cur_lna << 2));
+ //TODO: Call N PHY RF Ctrl Override with 0x400, tmp[0], 3, 0 as arguments
+ //TODO: Call N PHY Force RF Seq with 2 as argument
+ //TODO: Call N PHT Stop Playback
+
+ if (playtone) {
+ //TODO: Call N PHY TX Tone with 4000, (nphy_rxcalparams & 0xffff), 0, 0 as arguments and save result as ret
+ playtone = false;
+ } else {
+ //TODO: Call N PHY Run Samples with 160, 0xFFFF, 0, 0, 0 as arguments
+ }
+
+ if (ret == 0) {
+ if (j < 3) {
+ b43_nphy_rx_iq_est(dev, &est, 1024, 32,
+ false);
+ if (i == 0) {
+ real = est.i0_pwr;
+ imag = est.q0_pwr;
+ } else {
+ real = est.i1_pwr;
+ imag = est.q1_pwr;
+ }
+ power[i] = ((real + imag) / 1024) + 1;
+ } else {
+ //TODO: Call N PHY Calc RX IQ Comp with (1 << i) as argument
+ }
+ //TODO: Call N PHY Stop Playback
+ }
+
+ if (ret != 0)
+ break;
+ }
+
+ b43_radio_mask(dev, B2055_C1_GENSPARE2, 0xFC);
+ b43_radio_mask(dev, B2055_C2_GENSPARE2, 0xFC);
+ b43_phy_write(dev, rfctl[1], tmp[5]);
+ b43_phy_write(dev, rfctl[0], tmp[4]);
+ b43_phy_write(dev, B43_NPHY_AFECTL_OVER, tmp[3]);
+ b43_phy_write(dev, afectl_core, tmp[2]);
+ b43_phy_write(dev, B43_NPHY_RFSEQCA, tmp[1]);
+
+ if (ret != 0)
+ break;
+ }
+
+ //TODO: Call N PHY RF Ctrl Override with 0x400, 0, 3, 1 as arguments
+ //TODO: Call N PHY Force RF Seq with 2 as argument
+ //TODO: Write an N PHY Table with ID 7, length 2, offset 0x110, width 16, and data from gain_save
+
+ b43_nphy_stay_in_carrier_search(dev, 0);
+
+ return ret;
+}
+
+static int b43_nphy_rev3_cal_rx_iq(struct b43_wldev *dev,
+ struct nphy_txgains target, u8 type, bool debug)
+{
+ return -1;
+}
+
+/* http://bcm-v4.sipsolutions.net/802.11/PHY/N/CalRxIq */
+static int b43_nphy_cal_rx_iq(struct b43_wldev *dev,
+ struct nphy_txgains target, u8 type, bool debug)
+{
+ if (dev->phy.rev >= 3)
+ return b43_nphy_rev3_cal_rx_iq(dev, target, type, debug);
+ else
+ return b43_nphy_rev2_cal_rx_iq(dev, target, type, debug);
+}
+
/* http://bcm-v4.sipsolutions.net/802.11/PHY/N/TxLpFbw */
static void b43_nphy_tx_lp_fbw(struct b43_wldev *dev)
{
@@ -1400,7 +1592,7 @@ int b43_phy_initn(struct b43_wldev *dev)
target = b43_nphy_get_tx_gains(dev);
}
/* TODO: If the output of N PHY Cal TX Iqlo with target, 1 0 as arguments is 0
- If the output of N PHY Cal RX Iqlo with target, 2 0 as arguments is 0
+ if (b43_nphy_cal_rx_iq(dev, target, 2, 0) == 0)
Call N PHY Save Cal */
} else if (nphy->mphase_cal_phase_id == 0) {
//TODO N PHY Periodic Calibration with argument 3
diff --git a/drivers/net/wireless/b43/phy_n.h b/drivers/net/wireless/b43/phy_n.h
index 491ff88..ab54b0f 100644
--- a/drivers/net/wireless/b43/phy_n.h
+++ b/drivers/net/wireless/b43/phy_n.h
@@ -973,6 +973,7 @@ struct b43_phy_n {
u8 antsel_type;
u16 papd_epsilon_offset[2];
u32 deaf_count;
+ u32 rxcalparams;
bool hang_avoid;
bool mute;
--
1.6.4.2
On 01/12/2010 01:38 PM, Rafał Miłecki wrote:
>
> Signed-off-by: Rafał Miłecki <[email protected]>
> ---
>
> Uh, bigger one. This patch causes false warning:
> drivers/net/wireless/b43/phy_n.c: In function ‘b43_nphy_rev2_cal_rx_iq’:
> drivers/net/wireless/b43/phy_n.c:627: warning: large integer implicitly truncated to unsigned type
>
> That's for:
> b43_phy_maskset(dev, B43_NPHY_RFSEQCA, ~B43_NPHY_RFSEQCA_RXDIS, ((1 - i) << B43_NPHY_RFSEQCA_RXDIS_SHIFT));
>
> It's inside loop i=0,1. I tried casting i on (u8) but this didn't help. Can we leave this? Or can sb share some trick to avoid this warning?
It is ~B43_NPHY_RFSEQCA_RXDIS, not i, that causes the warning. Change the
statement to
b43_phy_maskset(dev, B43_NPHY_RFSEQCA, (u16)(~B43_NPHY_RFSEQCA_RXDIS),
((1 - i) << B43_NPHY_RFSEQCA_RXDIS_SHIFT));
Larry
On 01/13/2010 07:38 AM, Rafał Miłecki wrote:
> W dniu 13 stycznia 2010 14:31 użytkownik Larry Finger
> <[email protected]> napisał:
>> On 01/12/2010 01:38 PM, Rafał Miłecki wrote:
>>>
>>> Signed-off-by: Rafał Miłecki <[email protected]>
>>> ---
>>>
>>> Uh, bigger one. This patch causes false warning:
>>> drivers/net/wireless/b43/phy_n.c: In function ‘b43_nphy_rev2_cal_rx_iq’:
>>> drivers/net/wireless/b43/phy_n.c:627: warning: large integer implicitly truncated to unsigned type
>>>
>>> That's for:
>>> b43_phy_maskset(dev, B43_NPHY_RFSEQCA, ~B43_NPHY_RFSEQCA_RXDIS, ((1 - i) << B43_NPHY_RFSEQCA_RXDIS_SHIFT));
>>>
>>> It's inside loop i=0,1. I tried casting i on (u8) but this didn't help. Can we leave this? Or can sb share some trick to avoid this warning?
>>
>> It is ~B43_NPHY_RFSEQCA_RXDIS, not i, that causes the warning. Change the
>> statement to
>>
>> b43_phy_maskset(dev, B43_NPHY_RFSEQCA, (u16)(~B43_NPHY_RFSEQCA_RXDIS),
>> ((1 - i) << B43_NPHY_RFSEQCA_RXDIS_SHIFT));
>
> Yeah, Michael already pointed that :)
For some reason, I lost my feed from linux-wireless. I found Michael's message
in the archives.
If I have not responded to any of your private messages, please send them again.
I'm not sure if the mail stoppage is general. There is no traffic from other
lists as well.
Larry
W dniu 13 stycznia 2010 14:31 użytkownik Larry Finger
<[email protected]> napisał:
> On 01/12/2010 01:38 PM, Rafał Miłecki wrote:
>>
>> Signed-off-by: Rafał Miłecki <[email protected]>
>> ---
>>
>> Uh, bigger one. This patch causes false warning:
>> drivers/net/wireless/b43/phy_n.c: In function ‘b43_nphy_rev2_cal_rx_iq’:
>> drivers/net/wireless/b43/phy_n.c:627: warning: large integer implicitly truncated to unsigned type
>>
>> That's for:
>> b43_phy_maskset(dev, B43_NPHY_RFSEQCA, ~B43_NPHY_RFSEQCA_RXDIS, ((1 - i) << B43_NPHY_RFSEQCA_RXDIS_SHIFT));
>>
>> It's inside loop i=0,1. I tried casting i on (u8) but this didn't help. Can we leave this? Or can sb share some trick to avoid this warning?
>
> It is ~B43_NPHY_RFSEQCA_RXDIS, not i, that causes the warning. Change the
> statement to
>
> b43_phy_maskset(dev, B43_NPHY_RFSEQCA, (u16)(~B43_NPHY_RFSEQCA_RXDIS),
> ((1 - i) << B43_NPHY_RFSEQCA_RXDIS_SHIFT));
Yeah, Michael already pointed that :)
--
Rafał
On Tuesday 12 January 2010 20:38:56 Rafał Miłecki wrote:
>
> Signed-off-by: Rafał Miłecki <[email protected]>
> ---
>
> Uh, bigger one. This patch causes false warning:
> drivers/net/wireless/b43/phy_n.c: In function ‘b43_nphy_rev2_cal_rx_iq’:
> drivers/net/wireless/b43/phy_n.c:627: warning: large integer implicitly truncated to unsigned type
>
> That's for:
I think the warning is caused by
b43_phy_maskset(dev, B43_NPHY_RFSEQCA,
THIS>>>>> ~B43_NPHY_RFSEQCA_RXDIS,
((1 - i) << B43_NPHY_RFSEQCA_RXDIS_SHIFT));
Well, I think the warning is pretty much bogus, but I think it can be worked around
by doing
(u16)~B43_NPHY_RFSEQCA_RXDIS
--
Greetings, Michael.