Certain regulatory domains could put restrictions on phy mode operation.
For example, in a few countries HE Operation is not allowed. For such
countries, firmware indicates this via phy bitmap in each reg rule.
Currently, there is no logic to parse this info and then pass it on to the
cfg80211/regulatory.
Add parsing of this phy bitmap from the regulatory channel change event and
then accordingly map it to cfg80211/regulatory flags and pass it on to it.
While at it, correct typo in debug print s/dsf/dfs.
Tested-on: IPQ8074 hw2.0 AHB WLAN.HK.2.7.0.1-01744-QCAHKSWPL_SILICONZ-1
Signed-off-by: Aditya Kumar Singh <[email protected]>
---
drivers/net/wireless/ath/ath11k/reg.c | 11 +++++++++++
drivers/net/wireless/ath/ath11k/reg.h | 3 +++
drivers/net/wireless/ath/ath11k/wmi.c | 5 +++--
3 files changed, 17 insertions(+), 2 deletions(-)
diff --git a/drivers/net/wireless/ath/ath11k/reg.c b/drivers/net/wireless/ath/ath11k/reg.c
index 7f9fb968dac6..3c7debae800a 100644
--- a/drivers/net/wireless/ath/ath11k/reg.c
+++ b/drivers/net/wireless/ath/ath11k/reg.c
@@ -352,6 +352,16 @@ static u32 ath11k_map_fw_reg_flags(u16 reg_flags)
return flags;
}
+static u32 ath11k_map_fw_phy_flags(u32 phy_flags)
+{
+ u32 flags = 0;
+
+ if (phy_flags & ATH11K_REG_PHY_BITMAP_NO11AX)
+ flags |= NL80211_RRF_NO_HE;
+
+ return flags;
+}
+
static bool
ath11k_reg_can_intersect(struct ieee80211_reg_rule *rule1,
struct ieee80211_reg_rule *rule2)
@@ -685,6 +695,7 @@ ath11k_reg_build_regd(struct ath11k_base *ab,
}
flags |= ath11k_map_fw_reg_flags(reg_rule->flags);
+ flags |= ath11k_map_fw_phy_flags(reg_info->phybitmap);
ath11k_reg_update_rule(tmp_regd->reg_rules + i,
reg_rule->start_freq,
diff --git a/drivers/net/wireless/ath/ath11k/reg.h b/drivers/net/wireless/ath/ath11k/reg.h
index 2f284f26378d..84daa6543b6a 100644
--- a/drivers/net/wireless/ath/ath11k/reg.h
+++ b/drivers/net/wireless/ath/ath11k/reg.h
@@ -24,6 +24,9 @@ enum ath11k_dfs_region {
ATH11K_DFS_REG_UNDEF,
};
+/* Phy bitmaps */
+#define ATH11K_REG_PHY_BITMAP_NO11AX BIT(5)
+
/* ATH11K Regulatory API's */
void ath11k_reg_init(struct ath11k *ar);
void ath11k_reg_free(struct ath11k_base *ab);
diff --git a/drivers/net/wireless/ath/ath11k/wmi.c b/drivers/net/wireless/ath/ath11k/wmi.c
index e93601fe7bcb..1542c2b0a981 100644
--- a/drivers/net/wireless/ath/ath11k/wmi.c
+++ b/drivers/net/wireless/ath/ath11k/wmi.c
@@ -5440,10 +5440,11 @@ static int ath11k_pull_reg_chan_list_ext_update_ev(struct ath11k_base *ab,
}
ath11k_dbg(ab, ATH11K_DBG_WMI,
- "cc_ext %s dsf %d BW: min_2ghz %d max_2ghz %d min_5ghz %d max_5ghz %d",
+ "cc_ext %s dfs %d BW: min_2ghz %d max_2ghz %d min_5ghz %d max_5ghz %d, phy_bitmap: 0x%x",
reg_info->alpha2, reg_info->dfs_region,
reg_info->min_bw_2ghz, reg_info->max_bw_2ghz,
- reg_info->min_bw_5ghz, reg_info->max_bw_5ghz);
+ reg_info->min_bw_5ghz, reg_info->max_bw_5ghz,
+ reg_info->phybitmap);
ath11k_dbg(ab, ATH11K_DBG_WMI,
"num_2ghz_reg_rules %d num_5ghz_reg_rules %d",
base-commit: 140accd3f29eee6507f8a51bc38e85c119aedf14
--
2.17.1
On 10/4/2023 2:26 AM, Aditya Kumar Singh wrote:
> Certain regulatory domains could put restrictions on phy mode operation.
> For example, in a few countries HE Operation is not allowed. For such
> countries, firmware indicates this via phy bitmap in each reg rule.
>
> Currently, there is no logic to parse this info and then pass it on to the
> cfg80211/regulatory.
>
> Add parsing of this phy bitmap from the regulatory channel change event and
> then accordingly map it to cfg80211/regulatory flags and pass it on to it.
>
> While at it, correct typo in debug print s/dsf/dfs.
>
> Tested-on: IPQ8074 hw2.0 AHB WLAN.HK.2.7.0.1-01744-QCAHKSWPL_SILICONZ-1
>
> Signed-off-by: Aditya Kumar Singh <[email protected]>
Acked-by: Jeff Johnson <[email protected]>
Aditya Kumar Singh <[email protected]> wrote:
> Certain regulatory domains could put restrictions on phy mode operation.
> For example, in a few countries HE Operation is not allowed. For such
> countries, firmware indicates this via phy bitmap in each reg rule.
>
> Currently, there is no logic to parse this info and then pass it on to the
> cfg80211/regulatory.
>
> Add parsing of this phy bitmap from the regulatory channel change event and
> then accordingly map it to cfg80211/regulatory flags and pass it on to it.
>
> While at it, correct typo in debug print s/dsf/dfs.
>
> Tested-on: IPQ8074 hw2.0 AHB WLAN.HK.2.7.0.1-01744-QCAHKSWPL_SILICONZ-1
>
> Signed-off-by: Aditya Kumar Singh <[email protected]>
> Acked-by: Jeff Johnson <[email protected]>
> Signed-off-by: Kalle Valo <[email protected]>
Patch applied to ath-next branch of ath.git, thanks.
534c2dd8099a wifi: ath11k: add parsing of phy bitmap for reg rules
--
https://patchwork.kernel.org/project/linux-wireless/patch/[email protected]/
https://wireless.wiki.kernel.org/en/developers/documentation/submittingpatches