Hello David,
I tried this new driver and it worked for me (board based on Renesas R-Car H3).
But Inoticed that the data rates are asymmetrical (seen from the device):
* iperf -c (mainly TX): 598 Kbits/sec to 2.67 Mbits/sec
* iperf -s (mainly RX): 64.4 Mbits/sec to 69.2 Mbits/sec
Regards,
Christoph
> From: [email protected]
> [mailto:[email protected]] On Behalf Of Baumann,
> Christoph (C.)
> Sent: Wednesday, June 29, 2016 9:45 PM
> To: [email protected]
> Subject: Re: [PATCH v8] Add new mac80211 driver mwlwifi.
>
> Hello David,
>
> I tried this new driver and it worked for me (board based on Renesas R-Car
> H3).
> But Inoticed that the data rates are asymmetrical (seen from the device):
> * iperf -c (mainly TX): 598 Kbits/sec to 2.67 Mbits/sec
> * iperf -s (mainly RX): 64.4 Mbits/sec to 69.2 Mbits/sec
>
Please check https://github.com/kaloz/mwlwifi to get latest firmware and configuration sample.
If you still get problem, please open an issue on https://github.com/kaloz/mwlwifi.
You can get HW, driver and firmware information via "cat /sys/kernel/debug/ieee80211/phy0/mwlwifi/info".
Please specify your configuration and test environment.
Thanks,
David
>
>
> Regards,
> Christoph
> --
> To unsubscribe from this list: send the line "unsubscribe linux-wireless" in the
> body of a message to [email protected] More majordomo info at
> http://vger.kernel.org/majordomo-info.html