2023-11-27 23:30:26

by Genes Lists

[permalink] [raw]
Subject: crash with 6.7 rc2 and rc3


lenovo laptop boots fine under 6.7rc1 and older including 6.6.2 stable.
but not for 6.7 rc2 or rc3.

It has a intel 7260 (rev 3) wireless and :

cpu family : 6
model : 60
model name : Intel(R) Core(TM) i7-4800MQ CPU @ 2.70GHz
stepping : 3
microcode : 0x28


As of 6.7 rc2 / rc3 it crashes towards the end of boot bringing up
services - some parts of crash scrolled off the screen so I apologize
if this (manually transcribed) trace didn't catch the first part.

I did a git bisect between rc1 and rc2 but was unable to reproduce the
crash for some reason. (I did not do make clean between each bisects).

During the bisect it booted every time, but networking was not
functional for any of the bisects.

Hope it's okay to report even though git bisect didn't get anywhere.

Gene

This is the what I got from screen :

CS: 0010 DS: 000 ES: 0000 CR0: 0000000080050033
CR2: 00007f30cf49ba38 CR3: 000000025b620004 CR4: 00000000001706f0
Call Trace:
<IRQ>
? die_addr+0x36/0x90
? exc_general_protection+0x1c5/0x430
? asm_exc_gemeral_protection+0x26/0x30
? iwl_phy_db_set_section+0xd6/0x1f0 [iwlwifi]
? __kmem_cache_alloc_node+0x1d5/0x2b0
? iwl_phy_db_set_section+0xd6/0x1f0 [iwlwifi]
? iwl_phy_db_set_section+0xd6/0x1f0 [iwlwifi]
__kmalloc_node_track_caller+0x51/0x160
kmemdup+0x20/0x50
iwl_phy_db_set_section+0xd6/0x1f0 [iwlwifi]
iwl_wait_phy_db_entry+0x2f/0x40 [iwlmvm]
iwl_notification_wait+0xb0/0xf0 [iwlwifi]
iwl_mvm_rx_common+0x8e/0x320 [iwlwifi]
iwl_pcie_napi_poll+0x2d/0x150 [iwlwifi]
__napi_poll+0x2b/0x1c0
net_rx_action+0x2b4/0x320
__do_softirq+0xff/0x339
net_rx_action+0x2b4/0x320
__do_softirq.part.0+0x88/0xa0
</IRQ>
<TASK>
__local_bh_enable_ip+0x91/0xa0
iwl_pcie_irq_handler+0x58d/0xc40 [iwlwifi]
? __pfx_irq_thread_fn+0x10/0x10
irq_thread_fn+0x23/0x60
irq_thread+0xfe/0x60
? __pfx_irq_thread_dtor+0x10/0x10
? __pfx_irq_thread+0x10/0x10
kthread+0xfa/0x130
? pff_kthread+0x10/0x10
ret_from_fork+0x34/0x50
? __pfx_kthread+0x10/0x10
ret_from_fork_asm+0x1b/0x30


2023-11-28 05:31:29

by Bagas Sanjaya

[permalink] [raw]
Subject: Re: crash with 6.7 rc2 and rc3

On Mon, Nov 27, 2023 at 03:55:37PM -0500, Genes Lists wrote:
>
> lenovo laptop boots fine under 6.7rc1 and older including 6.6.2 stable.
> but not for 6.7 rc2 or rc3.
>
> It has a intel 7260 (rev 3) wireless and :
>
> cpu family : 6
> model : 60
> model name : Intel(R) Core(TM) i7-4800MQ CPU @ 2.70GHz
> stepping : 3
> microcode : 0x28
>
>
> As of 6.7 rc2 / rc3 it crashes towards the end of boot bringing up services
> - some parts of crash scrolled off the screen so I apologize if this
> (manually transcribed) trace didn't catch the first part.
>
> I did a git bisect between rc1 and rc2 but was unable to reproduce the crash
> for some reason. (I did not do make clean between each bisects).
>
> During the bisect it booted every time, but networking was not functional
> for any of the bisects.
>
> Hope it's okay to report even though git bisect didn't get anywhere.
>
> Gene
>
> This is the what I got from screen :
>
> CS: 0010 DS: 000 ES: 0000 CR0: 0000000080050033
> CR2: 00007f30cf49ba38 CR3: 000000025b620004 CR4: 00000000001706f0
> Call Trace:
> <IRQ>
> ? die_addr+0x36/0x90
> ? exc_general_protection+0x1c5/0x430
> ? asm_exc_gemeral_protection+0x26/0x30
> ? iwl_phy_db_set_section+0xd6/0x1f0 [iwlwifi]
> ? __kmem_cache_alloc_node+0x1d5/0x2b0
> ? iwl_phy_db_set_section+0xd6/0x1f0 [iwlwifi]
> ? iwl_phy_db_set_section+0xd6/0x1f0 [iwlwifi]
> __kmalloc_node_track_caller+0x51/0x160
> kmemdup+0x20/0x50
> iwl_phy_db_set_section+0xd6/0x1f0 [iwlwifi]
> iwl_wait_phy_db_entry+0x2f/0x40 [iwlmvm]
> iwl_notification_wait+0xb0/0xf0 [iwlwifi]
> iwl_mvm_rx_common+0x8e/0x320 [iwlwifi]
> iwl_pcie_napi_poll+0x2d/0x150 [iwlwifi]
> __napi_poll+0x2b/0x1c0
> net_rx_action+0x2b4/0x320
> __do_softirq+0xff/0x339
> net_rx_action+0x2b4/0x320
> __do_softirq.part.0+0x88/0xa0
> </IRQ>
> <TASK>
> __local_bh_enable_ip+0x91/0xa0
> iwl_pcie_irq_handler+0x58d/0xc40 [iwlwifi]
> ? __pfx_irq_thread_fn+0x10/0x10
> irq_thread_fn+0x23/0x60
> irq_thread+0xfe/0x60
> ? __pfx_irq_thread_dtor+0x10/0x10
> ? __pfx_irq_thread+0x10/0x10
> kthread+0xfa/0x130
> ? pff_kthread+0x10/0x10
> ret_from_fork+0x34/0x50
> ? __pfx_kthread+0x10/0x10
> ret_from_fork_asm+0x1b/0x30

Do you have any full system logs that can be attached?

Anyway, thanks for the regression report. I'm adding it to regzbot:

#regzbot ^introduced: v6.7-rc1..v6.7-rc2

--
An old man doll... just what I always wanted! - Clara


Attachments:
(No filename) (2.42 kB)
signature.asc (235.00 B)
Download all attachments

2023-11-28 10:39:56

by Genes Lists

[permalink] [raw]
Subject: Re: crash with 6.7 rc2 and rc3

On 11/28/23 00:31, Bagas Sanjaya wrote:
> On Mon, Nov 27, 2023 at 03:55:37PM -0500, Genes Lists wrote:
>>
>> lenovo laptop boots fine under 6.7rc1 and older including 6.6.2 stable.
>> but not for 6.7 rc2 or rc3.
>>
>> It has a intel 7260 (rev 3) wireless and :
>>
>> cpu family : 6
>> model : 60
>> model name : Intel(R) Core(TM) i7-4800MQ CPU @ 2.70GHz
>> stepping : 3
>> microcode : 0x28
>>
>>
>> As of 6.7 rc2 / rc3 it crashes towards the end of boot bringing up services
>> - some parts of crash scrolled off the screen so I apologize if this
>> (manually transcribed) trace didn't catch the first part.
>>
>> I did a git bisect between rc1 and rc2 but was unable to reproduce the crash
>> for some reason. (I did not do make clean between each bisects).
>>
>> During the bisect it booted every time, but networking was not functional
>> for any of the bisects.
>>
>> Hope it's okay to report even though git bisect didn't get anywhere.
>>
>> Gene
>>
>> This is the what I got from screen :
>>
>> CS: 0010 DS: 000 ES: 0000 CR0: 0000000080050033
>> CR2: 00007f30cf49ba38 CR3: 000000025b620004 CR4: 00000000001706f0
>> Call Trace:
>> <IRQ>
>> ? die_addr+0x36/0x90
>> ? exc_general_protection+0x1c5/0x430
>> ? asm_exc_gemeral_protection+0x26/0x30
>> ? iwl_phy_db_set_section+0xd6/0x1f0 [iwlwifi]
>> ? __kmem_cache_alloc_node+0x1d5/0x2b0
>> ? iwl_phy_db_set_section+0xd6/0x1f0 [iwlwifi]
>> ? iwl_phy_db_set_section+0xd6/0x1f0 [iwlwifi]
>> __kmalloc_node_track_caller+0x51/0x160
>> kmemdup+0x20/0x50
>> iwl_phy_db_set_section+0xd6/0x1f0 [iwlwifi]
>> iwl_wait_phy_db_entry+0x2f/0x40 [iwlmvm]
>> iwl_notification_wait+0xb0/0xf0 [iwlwifi]
>> iwl_mvm_rx_common+0x8e/0x320 [iwlwifi]
>> iwl_pcie_napi_poll+0x2d/0x150 [iwlwifi]
>> __napi_poll+0x2b/0x1c0
>> net_rx_action+0x2b4/0x320
>> __do_softirq+0xff/0x339
>> net_rx_action+0x2b4/0x320
>> __do_softirq.part.0+0x88/0xa0
>> </IRQ>
>> <TASK>
>> __local_bh_enable_ip+0x91/0xa0
>> iwl_pcie_irq_handler+0x58d/0xc40 [iwlwifi]
>> ? __pfx_irq_thread_fn+0x10/0x10
>> irq_thread_fn+0x23/0x60
>> irq_thread+0xfe/0x60
>> ? __pfx_irq_thread_dtor+0x10/0x10
>> ? __pfx_irq_thread+0x10/0x10
>> kthread+0xfa/0x130
>> ? pff_kthread+0x10/0x10
>> ret_from_fork+0x34/0x50
>> ? __pfx_kthread+0x10/0x10
>> ret_from_fork_asm+0x1b/0x30
>
> Do you have any full system logs that can be attached?
>
> Anyway, thanks for the regression report. I'm adding it to regzbot:
>
> #regzbot ^introduced: v6.7-rc1..v6.7-rc2
>

journalctl -k for 6.6.2 and the last bisect

gene


Attachments:
log-6.7.rc2-test (83.24 kB)
log-6.6.2 (99.31 kB)
Download all attachments

2023-11-28 19:56:45

by Genes Lists

[permalink] [raw]
Subject: Re: crash with 6.7 rc2 and rc3

On 11/28/23 05:39, Genes Lists wrote:
> On 11/28/23 00:31, Bagas Sanjaya wrote:
>> On Mon, Nov 27, 2023 at 03:55:37PM -0500, Genes Lists wrote:
>>>
>>> lenovo laptop boots fine under 6.7rc1 and older including 6.6.2 stable.
>>> but not for 6.7 rc2 or rc3.
>>>
>>> It has a intel 7260 (rev 3) wireless and :
>>>
>>> cpu family    : 6
>>> model        : 60
>>> model name    : Intel(R) Core(TM) i7-4800MQ CPU @ 2.70GHz
>>> stepping    : 3
>>> microcode    : 0x28
>>>
>>>
>>> As of 6.7 rc2 / rc3 it crashes towards the end of boot bringing up
>>> services
>>> -  some parts of crash scrolled off the screen so I apologize if this
>>> (manually transcribed) trace didn't catch the first part.
>>>
>>> I did a git bisect between rc1 and rc2 but was unable to reproduce
>>> the crash
>>> for some reason. (I did not do make clean between each bisects).
>>>
>>> During the bisect it booted every time, but networking was not
>>> functional
>>> for any of the bisects.
>>>
>>> Hope it's okay to report even though git bisect didn't get anywhere.
>>>
>>> Gene
>>>
>>> This is the what I got from screen :
>>>
>>> CS: 0010 DS: 000 ES: 0000 CR0: 0000000080050033
>>> CR2: 00007f30cf49ba38 CR3: 000000025b620004 CR4: 00000000001706f0
>>> Call Trace:
>>>   <IRQ>
>>>   ? die_addr+0x36/0x90
>>>   ? exc_general_protection+0x1c5/0x430
>>>   ? asm_exc_gemeral_protection+0x26/0x30
>>>   ? iwl_phy_db_set_section+0xd6/0x1f0 [iwlwifi]
>>>   ? __kmem_cache_alloc_node+0x1d5/0x2b0
>>>   ? iwl_phy_db_set_section+0xd6/0x1f0 [iwlwifi]
>>>   ? iwl_phy_db_set_section+0xd6/0x1f0 [iwlwifi]
>>>   __kmalloc_node_track_caller+0x51/0x160
>>>   kmemdup+0x20/0x50
>>>   iwl_phy_db_set_section+0xd6/0x1f0 [iwlwifi]
>>>   iwl_wait_phy_db_entry+0x2f/0x40 [iwlmvm]
>>>   iwl_notification_wait+0xb0/0xf0 [iwlwifi]
>>>   iwl_mvm_rx_common+0x8e/0x320 [iwlwifi]
>>>   iwl_pcie_napi_poll+0x2d/0x150 [iwlwifi]
>>>   __napi_poll+0x2b/0x1c0
>>>   net_rx_action+0x2b4/0x320
>>>   __do_softirq+0xff/0x339
>>>   net_rx_action+0x2b4/0x320
>>>   __do_softirq.part.0+0x88/0xa0
>>> </IRQ>
>>> <TASK>
>>> __local_bh_enable_ip+0x91/0xa0
>>> iwl_pcie_irq_handler+0x58d/0xc40 [iwlwifi]
>>> ? __pfx_irq_thread_fn+0x10/0x10
>>> irq_thread_fn+0x23/0x60
>>> irq_thread+0xfe/0x60
>>> ? __pfx_irq_thread_dtor+0x10/0x10
>>> ? __pfx_irq_thread+0x10/0x10
>>> kthread+0xfa/0x130
>>> ? pff_kthread+0x10/0x10
>>> ret_from_fork+0x34/0x50
>>> ? __pfx_kthread+0x10/0x10
>>> ret_from_fork_asm+0x1b/0x30
>>
>> Do you have any full system logs that can be attached?
>>
>> Anyway, thanks for the regression report. I'm adding it to regzbot:
>>
>> #regzbot ^introduced: v6.7-rc1..v6.7-rc2
>>
>
> journalctl -k for 6.6.2 and the last bisect
>
> gene
>

6.6.3 crashes for me same way - also an intel NUC also crashes with
6.6.3 buty works on 6.6.2. Will take a while before I get additional
info on the latter box.

gene





2023-11-29 17:53:44

by Genes Lists

[permalink] [raw]
Subject: Re: crash with 6.7 rc2 and rc3

On 11/28/23 14:56, Genes Lists wrote:
> On 11/28/23 05:39, Genes Lists wrote:
>> On 11/28/23 00:31, Bagas Sanjaya wrote:
>>> On Mon, Nov 27, 2023 at 03:55:37PM -0500, Genes Lists wrote:
>>>>
>>>> lenovo laptop boots fine under 6.7rc1 and older including 6.6.2 stable.
>>>> but not for 6.7 rc2 or rc3.
>>>>
>>>> ...
>
>

This appears to be build related. Starting from scratch with builds and
they are now working fine.

My sincere apologies - please ignore/close this as (silly) user error.

thanks

gene


2023-11-30 03:52:12

by Bagas Sanjaya

[permalink] [raw]
Subject: Re: crash with 6.7 rc2 and rc3

On Wed, Nov 29, 2023 at 12:53:28PM -0500, Genes Lists wrote:
> On 11/28/23 14:56, Genes Lists wrote:
> > On 11/28/23 05:39, Genes Lists wrote:
> > > On 11/28/23 00:31, Bagas Sanjaya wrote:
> > > > On Mon, Nov 27, 2023 at 03:55:37PM -0500, Genes Lists wrote:
> > > > >
> > > > > lenovo laptop boots fine under 6.7rc1 and older including 6.6.2 stable.
> > > > > but not for 6.7 rc2 or rc3.
> > > > >
> > > > > ...
> >
> >
>
> This appears to be build related. Starting from scratch with builds and they
> are now working fine.
>
> My sincere apologies - please ignore/close this as (silly) user error.
>

Telling regzbot:

#regzbot resolve: fixed by clean build

Thanks.

--
An old man doll... just what I always wanted! - Clara


Attachments:
(No filename) (762.00 B)
signature.asc (235.00 B)
Download all attachments