2024-01-15 20:24:02

by Uwe Kleine-König

[permalink] [raw]
Subject: [PATCH 00/33] spi: get rid of some legacy macros

Hello,

In commit 8caab75fd2c2 ("spi: Generalize SPI "master" to "controller"")
some functions were renamed. Further some compat defines were introduced
to map the old names to the new ones.

In this series all drivers still using the old names are changed to use
the new ones and then in patch #32 the compat defines are dropped.
Variables and struct members of type pointer to struct spi_controller that were
named "master" (matching the old name of spi_controller) were renamed to
"ctlr", which slightly increased the count of touched lines, but is nice
for consistency.

Patch #18 and #19 touch the same driver, otherwise the patches #1 - #31
are pairwise independent and could be applied by their respective
maintainers. The alternative is to let all patches go via the spi tree.
Mark, what's your preference here?

Patch #33 updates the documentation. (This one is a bit fuzzy, because
it also does some s/master/host/ which doesn't match the remainder of
the series). Also patch #18 is an improvement I noticed while touching
this driver that doesn't match the series' topic. I still kept it
included here. If you should not like it, it can just be dropped.

Best regards
Uwe

Uwe Kleine-König (33):
fpga: ice40-spi: Follow renaming of SPI "master" to "controller"
ieee802154: ca8210: Follow renaming of SPI "master" to "controller"
iio: adc: ad_sigma_delta: Follow renaming of SPI "master" to "controller"
Input: pxspad - follow renaming of SPI "master" to "controller"
Input: synaptics-rmi4 - follow renaming of SPI "master" to "controller"
media: mgb4: Follow renaming of SPI "master" to "controller"
media: netup_unidvb: Follow renaming of SPI "master" to "controller"
media: usb/msi2500: Follow renaming of SPI "master" to "controller"
media: v4l2-subdev: Follow renaming of SPI "master" to "controller"
misc: gehc-achc: Follow renaming of SPI "master" to "controller"
mmc: mmc_spi: Follow renaming of SPI "master" to "controller"
mtd: dataflash: Follow renaming of SPI "master" to "controller"
mtd: rawnand: fsl_elbc: Let .probe retry if local bus is missing
net: ks8851: Follow renaming of SPI "master" to "controller"
net: vertexcom: mse102x: Follow renaming of SPI "master" to "controller"
platform/chrome: cros_ec_spi: Follow renaming of SPI "master" to "controller"
spi: bitbang: Follow renaming of SPI "master" to "controller"
spi: cadence-quadspi: Don't emit error message on allocation error
spi: cadence-quadspi: Follow renaming of SPI "master" to "controller"
spi: cavium: Follow renaming of SPI "master" to "controller"
spi: geni-qcom: Follow renaming of SPI "master" to "controller"
spi: loopback-test: Follow renaming of SPI "master" to "controller"
spi: slave-mt27xx: Follow renaming of SPI "master" to "controller"
spi: spidev: Follow renaming of SPI "master" to "controller"
staging: fbtft: Follow renaming of SPI "master" to "controller"
staging: greybus: spi: Follow renaming of SPI "master" to "controller"
tpm_tis_spi: Follow renaming of SPI "master" to "controller"
usb: gadget: max3420_udc: Follow renaming of SPI "master" to "controller"
video: fbdev: mmp: Follow renaming of SPI "master" to "controller"
wifi: libertas: Follow renaming of SPI "master" to "controller"
spi: fsl-lib: Follow renaming of SPI "master" to "controller"
spi: Drop compat layer from renaming "master" to "controller"
Documentation: spi: Update documentation for renaming "master" to "controller"

.../driver-api/driver-model/devres.rst | 2 +-
Documentation/spi/spi-summary.rst | 74 +++++++++----------
drivers/char/tpm/tpm_tis_spi_main.c | 4 +-
drivers/fpga/ice40-spi.c | 4 +-
drivers/iio/adc/ad_sigma_delta.c | 14 ++--
drivers/input/joystick/psxpad-spi.c | 4 +-
drivers/input/rmi4/rmi_spi.c | 2 +-
drivers/media/pci/mgb4/mgb4_core.c | 14 ++--
.../media/pci/netup_unidvb/netup_unidvb_spi.c | 48 ++++++------
drivers/media/usb/msi2500/msi2500.c | 38 +++++-----
drivers/media/v4l2-core/v4l2-spi.c | 4 +-
drivers/misc/gehc-achc.c | 8 +-
drivers/mmc/host/mmc_spi.c | 6 +-
drivers/mtd/devices/mtd_dataflash.c | 2 +-
drivers/mtd/nand/raw/fsl_elbc_nand.c | 3 +-
drivers/net/ethernet/micrel/ks8851_spi.c | 4 +-
drivers/net/ethernet/vertexcom/mse102x.c | 2 +-
drivers/net/ieee802154/ca8210.c | 2 +-
.../net/wireless/marvell/libertas/if_spi.c | 2 +-
drivers/platform/chrome/cros_ec_spi.c | 8 +-
drivers/spi/spi-ath79.c | 4 +-
drivers/spi/spi-bitbang.c | 64 ++++++++--------
drivers/spi/spi-butterfly.c | 6 +-
drivers/spi/spi-cadence-quadspi.c | 7 +-
drivers/spi/spi-cavium.c | 6 +-
drivers/spi/spi-cavium.h | 2 +-
drivers/spi/spi-davinci.c | 6 +-
drivers/spi/spi-fsl-lib.c | 14 ++--
drivers/spi/spi-geni-qcom.c | 2 +-
drivers/spi/spi-gpio.c | 2 +-
drivers/spi/spi-lm70llp.c | 6 +-
drivers/spi/spi-loopback-test.c | 4 +-
drivers/spi/spi-oc-tiny.c | 6 +-
drivers/spi/spi-omap-uwire.c | 4 +-
drivers/spi/spi-slave-mt27xx.c | 2 +-
drivers/spi/spi-xilinx.c | 4 +-
drivers/spi/spi-xtensa-xtfpga.c | 2 +-
drivers/spi/spi.c | 2 +-
drivers/spi/spidev.c | 2 +-
drivers/staging/fbtft/fbtft-core.c | 4 +-
drivers/staging/greybus/spilib.c | 66 ++++++++---------
drivers/usb/gadget/udc/max3420_udc.c | 2 +-
drivers/video/fbdev/mmp/hw/mmp_spi.c | 26 +++----
include/linux/spi/spi.h | 20 +----
include/linux/spi/spi_bitbang.h | 2 +-
include/media/v4l2-common.h | 6 +-
46 files changed, 249 insertions(+), 267 deletions(-)


base-commit: 8d04a7e2ee3fd6aabb8096b00c64db0d735bc874
--
2.43.0



2024-01-16 14:41:23

by Mark Brown

[permalink] [raw]
Subject: Re: [PATCH 00/33] spi: get rid of some legacy macros

On Mon, Jan 15, 2024 at 09:12:46PM +0100, Uwe Kleine-K?nig wrote:

> In commit 8caab75fd2c2 ("spi: Generalize SPI "master" to "controller"")
> some functions were renamed. Further some compat defines were introduced
> to map the old names to the new ones.

> Patch #18 and #19 touch the same driver, otherwise the patches #1 - #31
> are pairwise independent and could be applied by their respective
> maintainers. The alternative is to let all patches go via the spi tree.
> Mark, what's your preference here?

I don't have a strong preference here, I'm happy to take all the patches
if the maintainers for the other subsystem are OK with that - ideally
I'd apply things at -rc1 but the timeline is a bit tight there. I think
my plan here unless anyone objects (or I notice something myself) will
be to queue things at -rc3, please shout if that doesn't seem
reasonable.


Attachments:
(No filename) (889.00 B)
signature.asc (499.00 B)
Download all attachments

2024-01-16 15:21:19

by Uwe Kleine-König

[permalink] [raw]
Subject: Re: [PATCH 00/33] spi: get rid of some legacy macros

Hello Mark,

On Tue, Jan 16, 2024 at 02:40:39PM +0000, Mark Brown wrote:
> On Mon, Jan 15, 2024 at 09:12:46PM +0100, Uwe Kleine-K?nig wrote:
>
> > In commit 8caab75fd2c2 ("spi: Generalize SPI "master" to "controller"")
> > some functions were renamed. Further some compat defines were introduced
> > to map the old names to the new ones.
>
> > Patch #18 and #19 touch the same driver, otherwise the patches #1 - #31
> > are pairwise independent and could be applied by their respective
> > maintainers. The alternative is to let all patches go via the spi tree.
> > Mark, what's your preference here?
>
> I don't have a strong preference here, I'm happy to take all the patches
> if the maintainers for the other subsystem are OK with that - ideally
> I'd apply things at -rc1 but the timeline is a bit tight there. I think
> my plan here unless anyone objects (or I notice something myself) will
> be to queue things at -rc3, please shout if that doesn't seem
> reasonable.

From my side there is no rush, we lived with these defines since
4.13-rc1. Applying them during the next merge window is fine for me.

Anyhow, I intend to resend the series for the feedback I received after
-rc1. Up to you when you want to apply it. Watching out for offending
patches using lore shouldn't be a big thing and I can do that.

Best regards
Uwe

--
Pengutronix e.K. | Uwe Kleine-K?nig |
Industrial Linux Solutions | https://www.pengutronix.de/ |


Attachments:
(No filename) (1.49 kB)
signature.asc (499.00 B)
Download all attachments