2017-10-05 06:09:36

by Kolli, Anilkumar

Subject: [PATCH] ath10k: fix sending wmi cmd during the tdls teardown

From: Anilkumar Kolli <[email protected]>

The current firmware 10.4-3.5.1-00035 on QCA9888 supports
TDLS explicit mode, it expects WMI_TDLS_ENABLE_PASSIVE
for tdls setup and WMI_TDLS_DISABLE for tdls teardown.

Signed-off-by: Anilkumar Kolli <[email protected]>
---
drivers/net/wireless/ath/ath10k/wmi.c | 3 ++-
1 file changed, 2 insertions(+), 1 deletion(-)

diff --git a/drivers/net/wireless/ath/ath10k/wmi.c b/drivers/net/wireless/ath/ath10k/wmi.c
index 38a97086708b..cad2e42dcef6 100644
--- a/drivers/net/wireless/ath/ath10k/wmi.c
+++ b/drivers/net/wireless/ath/ath10k/wmi.c
@@ -7870,7 +7870,8 @@ static int ath10k_wmi_10_4_op_get_vdev_subtype(struct ath10k *ar,
if (!skb)
return ERR_PTR(-ENOMEM);

- if (test_bit(WMI_SERVICE_TDLS_EXPLICIT_MODE_ONLY, ar->wmi.svc_map))
+ if (test_bit(WMI_SERVICE_TDLS_EXPLICIT_MODE_ONLY, ar->wmi.svc_map) &&
+ state == WMI_TDLS_ENABLE_ACTIVE)
state = WMI_TDLS_ENABLE_PASSIVE;

if (test_bit(WMI_SERVICE_TDLS_UAPSD_BUFFER_STA, ar->wmi.svc_map))
--
1.7.9.5

2017-10-27 13:48:34

by Kalle Valo

Subject: Re: ath10k: fix sending wmi cmd during the tdls teardown

[email protected] wrote:

> The current firmware 10.4-3.5.1-00035 on QCA9888 supports
> TDLS explicit mode, it expects WMI_TDLS_ENABLE_PASSIVE
> for tdls setup and WMI_TDLS_DISABLE for tdls teardown.
>
> Signed-off-by: Anilkumar Kolli <[email protected]>
> Signed-off-by: Kalle Valo <[email protected]>

Patch applied to ath-next branch of ath.git, thanks.

e5b6853e9922 ath10k: fix sending wmi cmd during the tdls teardown

--
https://patchwork.kernel.org/patch/9986455/

https://wireless.wiki.kernel.org/en/developers/documentation/submittingpatches