Implement support for external PA connected to MT7620A.
Signed-off-by: Tomislav Požega <[email protected]>
[[email protected]: use chanreg and dccal helpers.]
Signed-off-by: Daniel Golle <[email protected]>
Acked-by: Stanislaw Gruszka <[email protected]>
---
drivers/net/wireless/ralink/rt2x00/rt2800.h | 1 +
.../net/wireless/ralink/rt2x00/rt2800lib.c | 52 ++++++++++++++++++-
2 files changed, 52 insertions(+), 1 deletion(-)
diff --git a/drivers/net/wireless/ralink/rt2x00/rt2800.h b/drivers/net/wireless/ralink/rt2x00/rt2800.h
index d758e887445783..431502021dc2fe 100644
--- a/drivers/net/wireless/ralink/rt2x00/rt2800.h
+++ b/drivers/net/wireless/ralink/rt2x00/rt2800.h
@@ -2739,6 +2739,7 @@ enum rt2800_eeprom_word {
#define EEPROM_NIC_CONF2_RX_STREAM FIELD16(0x000f)
#define EEPROM_NIC_CONF2_TX_STREAM FIELD16(0x00f0)
#define EEPROM_NIC_CONF2_CRYSTAL FIELD16(0x0600)
+#define EEPROM_NIC_CONF2_EXTERNAL_PA FIELD16(0x8000)
/*
* EEPROM LNA
diff --git a/drivers/net/wireless/ralink/rt2x00/rt2800lib.c b/drivers/net/wireless/ralink/rt2x00/rt2800lib.c
index cc9c5554fdc9ca..b34453bd87174f 100644
--- a/drivers/net/wireless/ralink/rt2x00/rt2800lib.c
+++ b/drivers/net/wireless/ralink/rt2x00/rt2800lib.c
@@ -4368,6 +4368,43 @@ static void rt2800_config_channel(struct rt2x00_dev *rt2x00dev,
rt2800_iq_calibrate(rt2x00dev, rf->channel);
}
+ if (rt2x00_rt(rt2x00dev, RT6352)) {
+ if (test_bit(CAPABILITY_EXTERNAL_PA_TX0,
+ &rt2x00dev->cap_flags)) {
+ reg = rt2800_register_read(rt2x00dev, RF_CONTROL3);
+ reg |= 0x00000101;
+ rt2800_register_write(rt2x00dev, RF_CONTROL3, reg);
+
+ reg = rt2800_register_read(rt2x00dev, RF_BYPASS3);
+ reg |= 0x00000101;
+ rt2800_register_write(rt2x00dev, RF_BYPASS3, reg);
+
+ rt2800_rfcsr_write_chanreg(rt2x00dev, 43, 0x73);
+ rt2800_rfcsr_write_chanreg(rt2x00dev, 44, 0x73);
+ rt2800_rfcsr_write_chanreg(rt2x00dev, 45, 0x73);
+ rt2800_rfcsr_write_chanreg(rt2x00dev, 46, 0x27);
+ rt2800_rfcsr_write_chanreg(rt2x00dev, 47, 0xC8);
+ rt2800_rfcsr_write_chanreg(rt2x00dev, 48, 0xA4);
+ rt2800_rfcsr_write_chanreg(rt2x00dev, 49, 0x05);
+ rt2800_rfcsr_write_chanreg(rt2x00dev, 54, 0x27);
+ rt2800_rfcsr_write_chanreg(rt2x00dev, 55, 0xC8);
+ rt2800_rfcsr_write_chanreg(rt2x00dev, 56, 0xA4);
+ rt2800_rfcsr_write_chanreg(rt2x00dev, 57, 0x05);
+ rt2800_rfcsr_write_chanreg(rt2x00dev, 58, 0x27);
+ rt2800_rfcsr_write_chanreg(rt2x00dev, 59, 0xC8);
+ rt2800_rfcsr_write_chanreg(rt2x00dev, 60, 0xA4);
+ rt2800_rfcsr_write_chanreg(rt2x00dev, 61, 0x05);
+ rt2800_rfcsr_write_dccal(rt2x00dev, 05, 0x00);
+
+ rt2800_register_write(rt2x00dev, TX0_RF_GAIN_CORRECT,
+ 0x36303636);
+ rt2800_register_write(rt2x00dev, TX0_RF_GAIN_ATTEN,
+ 0x6C6C6B6C);
+ rt2800_register_write(rt2x00dev, TX1_RF_GAIN_ATTEN,
+ 0x6C6C6B6C);
+ }
+ }
+
bbp = rt2800_bbp_read(rt2x00dev, 4);
rt2x00_set_field8(&bbp, BBP4_BANDWIDTH, 2 * conf_is_ht40(conf));
rt2800_bbp_write(rt2x00dev, 4, bbp);
@@ -9566,7 +9603,8 @@ static int rt2800_init_eeprom(struct rt2x00_dev *rt2x00dev)
*/
eeprom = rt2800_eeprom_read(rt2x00dev, EEPROM_NIC_CONF1);
- if (rt2x00_rt(rt2x00dev, RT3352)) {
+ if (rt2x00_rt(rt2x00dev, RT3352) ||
+ rt2x00_rt(rt2x00dev, RT6352)) {
if (rt2x00_get_field16(eeprom,
EEPROM_NIC_CONF1_EXTERNAL_TX0_PA_3352))
__set_bit(CAPABILITY_EXTERNAL_PA_TX0,
@@ -9577,6 +9615,18 @@ static int rt2800_init_eeprom(struct rt2x00_dev *rt2x00dev)
&rt2x00dev->cap_flags);
}
+ eeprom = rt2800_eeprom_read(rt2x00dev, EEPROM_NIC_CONF2);
+
+ if (rt2x00_rt(rt2x00dev, RT6352) && eeprom != 0 && eeprom != 0xffff) {
+ if (!rt2x00_get_field16(eeprom,
+ EEPROM_NIC_CONF2_EXTERNAL_PA)) {
+ __clear_bit(CAPABILITY_EXTERNAL_PA_TX0,
+ &rt2x00dev->cap_flags);
+ __clear_bit(CAPABILITY_EXTERNAL_PA_TX1,
+ &rt2x00dev->cap_flags);
+ }
+ }
+
return 0;
}
--
2.37.3