Adjust capabilities setup for DBDC to improve performance.
Signed-off-by: Ryder Lee <[email protected]>
---
change since v2 - adjust setup sequence.
---
.../net/wireless/mediatek/mt76/mt7915/init.c | 50 +++++++++++--------
1 file changed, 29 insertions(+), 21 deletions(-)
diff --git a/drivers/net/wireless/mediatek/mt76/mt7915/init.c b/drivers/net/wireless/mediatek/mt76/mt7915/init.c
index c599b44a728c..98de148e1043 100644
--- a/drivers/net/wireless/mediatek/mt76/mt7915/init.c
+++ b/drivers/net/wireless/mediatek/mt76/mt7915/init.c
@@ -113,6 +113,24 @@ mt7915_init_wiphy(struct ieee80211_hw *hw)
ieee80211_hw_set(hw, WANT_MONITOR_VIF);
hw->max_tx_fragments = 4;
+
+ if (phy->mt76->cap.has_2ghz)
+ phy->mt76->sband_2g.sband.ht_cap.cap |=
+ IEEE80211_HT_CAP_LDPC_CODING |
+ IEEE80211_HT_CAP_MAX_AMSDU;
+
+ if (phy->mt76->cap.has_5ghz) {
+ phy->mt76->sband_5g.sband.ht_cap.cap |=
+ IEEE80211_HT_CAP_LDPC_CODING |
+ IEEE80211_HT_CAP_MAX_AMSDU;
+ phy->mt76->sband_5g.sband.vht_cap.cap |=
+ IEEE80211_VHT_CAP_MAX_MPDU_LENGTH_7991 |
+ IEEE80211_VHT_CAP_MAX_A_MPDU_LENGTH_EXPONENT_MASK;
+ }
+
+ mt76_set_stream_caps(phy->mt76, true);
+ mt7915_set_stream_vht_txbf_caps(phy);
+ mt7915_set_stream_he_caps(phy);
}
static void
@@ -240,22 +258,17 @@ static int mt7915_register_ext_phy(struct mt7915_dev *dev)
phy->mt76 = mphy;
mphy->chainmask = dev->chainmask & ~dev->mphy.chainmask;
mphy->antenna_mask = BIT(hweight8(mphy->chainmask)) - 1;
- mt7915_init_wiphy(mphy->hw);
INIT_LIST_HEAD(&phy->stats_list);
INIT_DELAYED_WORK(&mphy->mac_work, mt7915_mac_work);
mt7915_eeprom_parse_band_config(phy);
- mt7915_set_stream_vht_txbf_caps(phy);
- mt7915_set_stream_he_caps(phy);
+ mt7915_init_wiphy(mphy->hw);
memcpy(mphy->macaddr, dev->mt76.eeprom.data + MT_EE_MAC_ADDR2,
ETH_ALEN);
mt76_eeprom_override(mphy);
- /* The second interface does not get any packets unless it has a vif */
- ieee80211_hw_set(mphy->hw, WANT_MONITOR_VIF);
-
ret = mt7915_init_tx_queues(phy, MT7915_TXQ_BAND1,
MT7915_TX_RING_SIZE);
if (ret)
@@ -332,8 +345,14 @@ static int mt7915_init_hardware(struct mt7915_dev *dev)
void mt7915_set_stream_vht_txbf_caps(struct mt7915_phy *phy)
{
- int nss = hweight8(phy->mt76->chainmask);
- u32 *cap = &phy->mt76->sband_5g.sband.vht_cap.cap;
+ int nss;
+ u32 *cap;
+
+ if (!phy->mt76->cap.has_5ghz)
+ return;
+
+ nss = hweight8(phy->mt76->chainmask);
+ *cap = &phy->mt76->sband_5g.sband.vht_cap.cap;
*cap |= IEEE80211_VHT_CAP_SU_BEAMFORMEE_CAPABLE |
IEEE80211_VHT_CAP_MU_BEAMFORMEE_CAPABLE |
@@ -637,25 +656,14 @@ int mt7915_register_device(struct mt7915_dev *dev)
return ret;
mt7915_init_wiphy(hw);
- dev->mphy.sband_2g.sband.ht_cap.cap |=
- IEEE80211_HT_CAP_LDPC_CODING |
- IEEE80211_HT_CAP_MAX_AMSDU;
- dev->mphy.sband_5g.sband.ht_cap.cap |=
- IEEE80211_HT_CAP_LDPC_CODING |
- IEEE80211_HT_CAP_MAX_AMSDU;
- dev->mphy.sband_5g.sband.vht_cap.cap |=
- IEEE80211_VHT_CAP_MAX_MPDU_LENGTH_7991 |
- IEEE80211_VHT_CAP_MAX_A_MPDU_LENGTH_EXPONENT_MASK;
+
if (!dev->dbdc_support)
dev->mphy.sband_5g.sband.vht_cap.cap |=
IEEE80211_VHT_CAP_SHORT_GI_160 |
IEEE80211_VHT_CAP_SUPP_CHAN_WIDTH_160_80PLUS80MHZ;
+
dev->mphy.hw->wiphy->available_antennas_rx = dev->mphy.chainmask;
dev->mphy.hw->wiphy->available_antennas_tx = dev->mphy.chainmask;
-
- mt76_set_stream_caps(&dev->mphy, true);
- mt7915_set_stream_vht_txbf_caps(&dev->phy);
- mt7915_set_stream_he_caps(&dev->phy);
dev->phy.dfs_state = -1;
#ifdef CONFIG_NL80211_TESTMODE
--
2.18.0
Same as mt7915, this should improve performance.
Signed-off-by: Ryder Lee <[email protected]>
---
change since v2 - adjust setup sequence.
---
.../net/wireless/mediatek/mt76/mt7615/init.c | 17 ++++++++++++-----
1 file changed, 12 insertions(+), 5 deletions(-)
diff --git a/drivers/net/wireless/mediatek/mt76/mt7615/init.c b/drivers/net/wireless/mediatek/mt76/mt7615/init.c
index 88a2ee7e7143..bc908514a510 100644
--- a/drivers/net/wireless/mediatek/mt76/mt7615/init.c
+++ b/drivers/net/wireless/mediatek/mt76/mt7615/init.c
@@ -368,6 +368,17 @@ mt7615_init_wiphy(struct ieee80211_hw *hw)
hw->max_tx_fragments = MT_TXP_MAX_BUF_NUM;
else
hw->max_tx_fragments = MT_HW_TXP_MAX_BUF_NUM;
+
+ if (phy->mt76->cap.has_2ghz)
+ phy->mt76->sband_2g.sband.ht_cap.cap |=
+ IEEE80211_HT_CAP_LDPC_CODING;
+
+ if (phy->mt76->cap.has_5ghz) {
+ phy->mt76->sband_5g.sband.ht_cap.cap |=
+ IEEE80211_HT_CAP_LDPC_CODING;
+ phy->mt76->sband_5g.sband.vht_cap.cap |=
+ IEEE80211_VHT_CAP_MAX_A_MPDU_LENGTH_EXPONENT_MASK;
+ }
}
static void
@@ -424,7 +435,6 @@ int mt7615_register_ext_phy(struct mt7615_dev *dev)
phy->mt76 = mphy;
mphy->chainmask = dev->chainmask & ~dev->mphy.chainmask;
mphy->antenna_mask = BIT(hweight8(mphy->chainmask)) - 1;
- mt7615_init_wiphy(mphy->hw);
INIT_DELAYED_WORK(&mphy->mac_work, mt7615_mac_work);
INIT_DELAYED_WORK(&phy->scan_work, mt7615_scan_work);
@@ -448,6 +458,7 @@ int mt7615_register_ext_phy(struct mt7615_dev *dev)
/* second phy can only handle 5 GHz */
mphy->cap.has_5ghz = true;
+ mt7615_init_wiphy(mphy->hw);
/* mt7615 second phy shares the same hw queues with the primary one */
for (i = 0; i <= MT_TXQ_PSD ; i++)
@@ -505,10 +516,6 @@ void mt7615_init_device(struct mt7615_dev *dev)
mt7615_init_wiphy(hw);
dev->pm.idle_timeout = MT7615_PM_TIMEOUT;
- dev->mphy.sband_2g.sband.ht_cap.cap |= IEEE80211_HT_CAP_LDPC_CODING;
- dev->mphy.sband_5g.sband.ht_cap.cap |= IEEE80211_HT_CAP_LDPC_CODING;
- dev->mphy.sband_5g.sband.vht_cap.cap |=
- IEEE80211_VHT_CAP_MAX_A_MPDU_LENGTH_EXPONENT_MASK;
mt7615_cap_dbdc_disable(dev);
dev->phy.dfs_state = -1;
--
2.18.0
_______________________________________________
kbuild mailing list -- [email protected]
To unsubscribe send an email to [email protected]
On Wed, 2021-03-10 at 11:30 +0300, Dan Carpenter wrote:
> Hi Ryder,
>
> url: https://github.com/0day-ci/linux/commits/Ryder-Lee/mt76-mt7915-add-missing-capabilities-for-DBDC/20210225-230323
> base: https://git.kernel.org/pub/scm/linux/kernel/git/kvalo/wireless-drivers-next.git master
> config: x86_64-randconfig-m001-20210309 (attached as .config)
> compiler: gcc-9 (Debian 9.3.0-22) 9.3.0
>
> If you fix the issue, kindly add following tag as appropriate
> Reported-by: kernel test robot <[email protected]>
> Reported-by: Dan Carpenter <[email protected]>
>
> smatch warnings:
> drivers/net/wireless/mediatek/mt76/mt7915/init.c:353 mt7915_set_stream_vht_txbf_caps() error: potentially dereferencing uninitialized 'cap'.
>
> vim +/cap +353 drivers/net/wireless/mediatek/mt76/mt7915/init.c
>
> 00b2e16e006390 Ryder Lee 2020-05-12 344 void mt7915_set_stream_vht_txbf_caps(struct mt7915_phy *phy)
> 00b2e16e006390 Ryder Lee 2020-05-12 345 {
> 50a6fe79623e22 Ryder Lee 2021-02-25 346 int nss;
> 50a6fe79623e22 Ryder Lee 2021-02-25 347 u32 *cap;
> 50a6fe79623e22 Ryder Lee 2021-02-25 348
> 50a6fe79623e22 Ryder Lee 2021-02-25 349 if (!phy->mt76->cap.has_5ghz)
> 50a6fe79623e22 Ryder Lee 2021-02-25 350 return;
> 50a6fe79623e22 Ryder Lee 2021-02-25 351
> 50a6fe79623e22 Ryder Lee 2021-02-25 352 nss = hweight8(phy->mt76->chainmask);
> 50a6fe79623e22 Ryder Lee 2021-02-25 @353 *cap = &phy->mt76->sband_5g.sband.vht_cap.cap;
> ^^^^
> "cap" isn't initialized.
This has been fixed in v3
https://patchwork.kernel.org/project/linux-mediatek/patch/427ab5a2a79b8bbfa05225cfe4cfb55b3f143c8c.1614357346.git.ryder.lee@mediatek.com/
Ryder