Enable NL80211_IFTYPE_MESH_POINT and update its path.
Signed-off-by: Ryder Lee <[email protected]>
---
Changes since v2 - remove unused definitions
---
drivers/net/wireless/mediatek/mt76/mt7615/init.c | 6 ++++++
drivers/net/wireless/mediatek/mt76/mt7615/main.c | 1 +
drivers/net/wireless/mediatek/mt76/mt7615/mcu.c | 5 ++++-
drivers/net/wireless/mediatek/mt76/mt7615/mcu.h | 6 ------
4 files changed, 11 insertions(+), 7 deletions(-)
diff --git a/drivers/net/wireless/mediatek/mt76/mt7615/init.c b/drivers/net/wireless/mediatek/mt76/mt7615/init.c
index 59f604f3161f..f860af6a42da 100644
--- a/drivers/net/wireless/mediatek/mt76/mt7615/init.c
+++ b/drivers/net/wireless/mediatek/mt76/mt7615/init.c
@@ -133,6 +133,9 @@ static const struct ieee80211_iface_limit if_limits[] = {
{
.max = MT7615_MAX_INTERFACES,
.types = BIT(NL80211_IFTYPE_AP) |
+#ifdef CONFIG_MAC80211_MESH
+ BIT(NL80211_IFTYPE_MESH_POINT) |
+#endif
BIT(NL80211_IFTYPE_STATION)
}
};
@@ -195,6 +198,9 @@ int mt7615_register_device(struct mt7615_dev *dev)
dev->mt76.antenna_mask = 0xf;
wiphy->interface_modes = BIT(NL80211_IFTYPE_STATION) |
+#ifdef CONFIG_MAC80211_MESH
+ BIT(NL80211_IFTYPE_MESH_POINT) |
+#endif
BIT(NL80211_IFTYPE_AP);
ret = mt76_register_device(&dev->mt76, true, mt7615_rates,
diff --git a/drivers/net/wireless/mediatek/mt76/mt7615/main.c b/drivers/net/wireless/mediatek/mt76/mt7615/main.c
index b0bb7cc12385..585e67fa2728 100644
--- a/drivers/net/wireless/mediatek/mt76/mt7615/main.c
+++ b/drivers/net/wireless/mediatek/mt76/mt7615/main.c
@@ -37,6 +37,7 @@ static int get_omac_idx(enum nl80211_iftype type, u32 mask)
switch (type) {
case NL80211_IFTYPE_AP:
+ case NL80211_IFTYPE_MESH_POINT:
/* ap use hw bssid 0 and ext bssid */
if (~mask & BIT(HW_BSSID_0))
return HW_BSSID_0;
diff --git a/drivers/net/wireless/mediatek/mt76/mt7615/mcu.c b/drivers/net/wireless/mediatek/mt76/mt7615/mcu.c
index 43f70195244c..8b8db526cb16 100644
--- a/drivers/net/wireless/mediatek/mt76/mt7615/mcu.c
+++ b/drivers/net/wireless/mediatek/mt76/mt7615/mcu.c
@@ -754,6 +754,7 @@ int mt7615_mcu_set_bss_info(struct mt7615_dev *dev,
switch (vif->type) {
case NL80211_IFTYPE_AP:
+ case NL80211_IFTYPE_MESH_POINT:
tx_wlan_idx = mvif->sta.wcid.idx;
conn_type = CONNECTION_INFRA_AP;
break;
@@ -968,7 +969,8 @@ int mt7615_mcu_add_wtbl(struct mt7615_dev *dev, struct ieee80211_vif *vif,
.rx_wtbl = {
.tag = cpu_to_le16(WTBL_RX),
.len = cpu_to_le16(sizeof(struct wtbl_rx)),
- .rca1 = vif->type != NL80211_IFTYPE_AP,
+ .rca1 = vif->type != (NL80211_IFTYPE_AP ||
+ NL80211_IFTYPE_MESH_POINT),
.rca2 = 1,
.rv = 1,
},
@@ -1042,6 +1044,7 @@ static void sta_rec_convert_vif_type(enum nl80211_iftype type, u32 *conn_type)
{
switch (type) {
case NL80211_IFTYPE_AP:
+ case NL80211_IFTYPE_MESH_POINT:
if (conn_type)
*conn_type = CONNECTION_INFRA_STA;
break;
diff --git a/drivers/net/wireless/mediatek/mt76/mt7615/mcu.h b/drivers/net/wireless/mediatek/mt76/mt7615/mcu.h
index e96efb13fa4d..0915cb735699 100644
--- a/drivers/net/wireless/mediatek/mt76/mt7615/mcu.h
+++ b/drivers/net/wireless/mediatek/mt76/mt7615/mcu.h
@@ -105,25 +105,19 @@ enum {
#define STA_TYPE_STA BIT(0)
#define STA_TYPE_AP BIT(1)
#define STA_TYPE_ADHOC BIT(2)
-#define STA_TYPE_TDLS BIT(3)
#define STA_TYPE_WDS BIT(4)
#define STA_TYPE_BC BIT(5)
#define NETWORK_INFRA BIT(16)
#define NETWORK_P2P BIT(17)
#define NETWORK_IBSS BIT(18)
-#define NETWORK_MESH BIT(19)
-#define NETWORK_BOW BIT(20)
#define NETWORK_WDS BIT(21)
#define CONNECTION_INFRA_STA (STA_TYPE_STA | NETWORK_INFRA)
#define CONNECTION_INFRA_AP (STA_TYPE_AP | NETWORK_INFRA)
#define CONNECTION_P2P_GC (STA_TYPE_STA | NETWORK_P2P)
#define CONNECTION_P2P_GO (STA_TYPE_AP | NETWORK_P2P)
-#define CONNECTION_MESH_STA (STA_TYPE_STA | NETWORK_MESH)
-#define CONNECTION_MESH_AP (STA_TYPE_AP | NETWORK_MESH)
#define CONNECTION_IBSS_ADHOC (STA_TYPE_ADHOC | NETWORK_IBSS)
-#define CONNECTION_TDLS (STA_TYPE_STA | NETWORK_INFRA | STA_TYPE_TDLS)
#define CONNECTION_WDS (STA_TYPE_WDS | NETWORK_WDS)
#define CONNECTION_INFRA_BC (STA_TYPE_BC | NETWORK_INFRA)
--
2.18.0
Fix wrong WCID assignment and add RKV (RX Key of this entry is valid)
flag to check if peer uses the same configuration with previous
handshaking.
If the configuration is mismatch, WTBL indicates a “cipher mismatch”
to stop SEC decryption to prevent the packet from damage.
Suggested-by: YF Luo <[email protected]>
Suggested-by: Yiwei Chung <[email protected]>
Signed-off-by: Ryder Lee <[email protected]>
---
Changes since v2 - none
---
drivers/net/wireless/mediatek/mt76/mt7615/init.c | 15 +++++++++------
drivers/net/wireless/mediatek/mt76/mt7615/main.c | 2 +-
drivers/net/wireless/mediatek/mt76/mt7615/mcu.c | 1 +
3 files changed, 11 insertions(+), 7 deletions(-)
diff --git a/drivers/net/wireless/mediatek/mt76/mt7615/init.c b/drivers/net/wireless/mediatek/mt76/mt7615/init.c
index f860af6a42da..b96c753b7532 100644
--- a/drivers/net/wireless/mediatek/mt76/mt7615/init.c
+++ b/drivers/net/wireless/mediatek/mt76/mt7615/init.c
@@ -62,16 +62,11 @@ static void mt7615_mac_init(struct mt7615_dev *dev)
MT_AGG_ARCR_RATE_DOWN_RATIO_EN |
FIELD_PREP(MT_AGG_ARCR_RATE_DOWN_RATIO, 1) |
FIELD_PREP(MT_AGG_ARCR_RATE_UP_EXTRA_TH, 4)));
-
- dev->mt76.global_wcid.idx = MT7615_WTBL_RESERVED;
- dev->mt76.global_wcid.hw_key_idx = -1;
- rcu_assign_pointer(dev->mt76.wcid[MT7615_WTBL_RESERVED],
- &dev->mt76.global_wcid);
}
static int mt7615_init_hardware(struct mt7615_dev *dev)
{
- int ret;
+ int ret, idx;
mt76_wr(dev, MT_INT_SOURCE_CSR, ~0);
@@ -98,6 +93,14 @@ static int mt7615_init_hardware(struct mt7615_dev *dev)
mt7615_mcu_ctrl_pm_state(dev, 0);
mt7615_mcu_del_wtbl_all(dev);
+ /* Beacon and mgmt frames should occupy wcid 0 */
+ idx = mt76_wcid_alloc(dev->mt76.wcid_mask, MT7615_WTBL_STA - 1);
+ if (idx)
+ return -ENOSPC;
+
+ dev->mt76.global_wcid.idx = idx;
+ dev->mt76.global_wcid.hw_key_idx = -1;
+ rcu_assign_pointer(dev->mt76.wcid[idx], &dev->mt76.global_wcid);
return 0;
}
diff --git a/drivers/net/wireless/mediatek/mt76/mt7615/main.c b/drivers/net/wireless/mediatek/mt76/mt7615/main.c
index 585e67fa2728..2cdd339453c8 100644
--- a/drivers/net/wireless/mediatek/mt76/mt7615/main.c
+++ b/drivers/net/wireless/mediatek/mt76/mt7615/main.c
@@ -95,7 +95,7 @@ static int mt7615_add_interface(struct ieee80211_hw *hw,
dev->vif_mask |= BIT(mvif->idx);
dev->omac_mask |= BIT(mvif->omac_idx);
- idx = MT7615_WTBL_RESERVED - 1 - mvif->idx;
+ idx = MT7615_WTBL_RESERVED - mvif->idx;
mvif->sta.wcid.idx = idx;
mvif->sta.wcid.hw_key_idx = -1;
diff --git a/drivers/net/wireless/mediatek/mt76/mt7615/mcu.c b/drivers/net/wireless/mediatek/mt76/mt7615/mcu.c
index 8b8db526cb16..5f38741e7366 100644
--- a/drivers/net/wireless/mediatek/mt76/mt7615/mcu.c
+++ b/drivers/net/wireless/mediatek/mt76/mt7615/mcu.c
@@ -882,6 +882,7 @@ int mt7615_mcu_set_wtbl_key(struct mt7615_dev *dev, int wcid,
if (cipher == MT_CIPHER_NONE && key)
return -EOPNOTSUPP;
+ req.key.rkv = 1;
req.key.cipher_id = cipher;
req.key.key_id = key->keyidx;
req.key.key_len = key->keylen;
--
2.18.0