2019-06-10 05:12:09

by Sebastian Gottschall

[permalink] [raw]
Subject: possible fix for broken cmac crypto support

this is no real patch for this mailing list since i havent cloned yet a
git tree. take it as a hint
this fixes the BUG WARN if SAE encryption is used (mandatory for mesh /
802.11s crypto)
that will not fix that mesh is not working (likelly just with other
vendors), but it will fix crypto at least

Sebastian

Index: main.c
===================================================================
--- main.c      (revision 4584)
+++ main.c      (revision 4585)
@@ -180,6 +180,20 @@ static int mt7615_set_key(struct ieee80211_hw *hw,
            !(key->flags & IEEE80211_KEY_FLAG_PAIRWISE))
                return -EOPNOTSUPP;

+       switch (key->cipher) {
+       case WLAN_CIPHER_SUITE_WEP40:
+       case WLAN_CIPHER_SUITE_WEP104:
+       case WLAN_CIPHER_SUITE_TKIP:
+       case WLAN_CIPHER_SUITE_CCMP:
+       case WLAN_CIPHER_SUITE_CCMP_256:
+       case WLAN_CIPHER_SUITE_GCMP:
+       case WLAN_CIPHER_SUITE_GCMP_256:
+       case WLAN_CIPHER_SUITE_SMS4:
+               break;
+       default:
+               return -EOPNOTSUPP;
+       }
+
        if (cmd == SET_KEY) {
                key->hw_key_idx = wcid->idx;
                wcid->hw_key_idx = idx;

Am 09.06.2019 um 16:36 schrieb Sebastian Gottschall:
> by the way. this big fat kernel warning exists in all operation modes
> unless anything else but aes-128 ccmp is used. since the chipset is
> capable of doing gcmp etc. as well
> it would be nice if this issue can be fixed. otherwise encryption
> support can be defined as "broken" for mt7615
>
> Am 06.06.2019 um 18:19 schrieb Lorenzo Bianconi:
>>> i tested your patch against a qca 9984 chipset using SAE and without
>>> encryption. both did not work. the devices are connecting, but no data
>>> connection is possible
>> Hi Sebastian,
>>
>> I tested Ryder's patch using mt76x2 as mesh peer and it works fine
>> for me.
>> Could you please provide some more info?
>>
>> Regards,
>> Lorenzo
>>
>>>
>>> Sebastian
>>>
>>> Am 03.06.2019 um 08:08 schrieb Ryder Lee:
>>>> Enable NL80211_IFTYPE_MESH_POINT and update its path.
>>>>
>>>> Signed-off-by: Ryder Lee <[email protected]>
>>>> ---
>>>> Changes since v3 - fix a wrong expression
>>>> Changes since v2 - remove unused definitions
>>>> ---
>>>>    drivers/net/wireless/mediatek/mt76/mt7615/init.c | 6 ++++++
>>>>    drivers/net/wireless/mediatek/mt76/mt7615/main.c | 1 +
>>>>    drivers/net/wireless/mediatek/mt76/mt7615/mcu.c  | 4 +++-
>>>>    drivers/net/wireless/mediatek/mt76/mt7615/mcu.h  | 6 ------
>>>>    4 files changed, 10 insertions(+), 7 deletions(-)
>>>>
>>>> diff --git a/drivers/net/wireless/mediatek/mt76/mt7615/init.c
>>>> b/drivers/net/wireless/mediatek/mt76/mt7615/init.c
>>>> index 59f604f3161f..f860af6a42da 100644
>>>> --- a/drivers/net/wireless/mediatek/mt76/mt7615/init.c
>>>> +++ b/drivers/net/wireless/mediatek/mt76/mt7615/init.c
>>>> @@ -133,6 +133,9 @@ static const struct ieee80211_iface_limit
>>>> if_limits[] = {
>>>>        {
>>>>                .max = MT7615_MAX_INTERFACES,
>>>>                .types = BIT(NL80211_IFTYPE_AP) |
>>>> +#ifdef CONFIG_MAC80211_MESH
>>>> +                      BIT(NL80211_IFTYPE_MESH_POINT) |
>>>> +#endif
>>>>                         BIT(NL80211_IFTYPE_STATION)
>>>>        }
>>>>    };
>>>> @@ -195,6 +198,9 @@ int mt7615_register_device(struct mt7615_dev *dev)
>>>>        dev->mt76.antenna_mask = 0xf;
>>>>
>>>>        wiphy->interface_modes = BIT(NL80211_IFTYPE_STATION) |
>>>> +#ifdef CONFIG_MAC80211_MESH
>>>> + BIT(NL80211_IFTYPE_MESH_POINT) |
>>>> +#endif
>>>>                                 BIT(NL80211_IFTYPE_AP);
>>>>
>>>>        ret = mt76_register_device(&dev->mt76, true, mt7615_rates,
>>>> diff --git a/drivers/net/wireless/mediatek/mt76/mt7615/main.c
>>>> b/drivers/net/wireless/mediatek/mt76/mt7615/main.c
>>>> index b0bb7cc12385..585e67fa2728 100644
>>>> --- a/drivers/net/wireless/mediatek/mt76/mt7615/main.c
>>>> +++ b/drivers/net/wireless/mediatek/mt76/mt7615/main.c
>>>> @@ -37,6 +37,7 @@ static int get_omac_idx(enum nl80211_iftype type,
>>>> u32 mask)
>>>>
>>>>        switch (type) {
>>>>        case NL80211_IFTYPE_AP:
>>>> +     case NL80211_IFTYPE_MESH_POINT:
>>>>                /* ap use hw bssid 0 and ext bssid */
>>>>                if (~mask & BIT(HW_BSSID_0))
>>>>                        return HW_BSSID_0;
>>>> diff --git a/drivers/net/wireless/mediatek/mt76/mt7615/mcu.c
>>>> b/drivers/net/wireless/mediatek/mt76/mt7615/mcu.c
>>>> index 43f70195244c..e82297048449 100644
>>>> --- a/drivers/net/wireless/mediatek/mt76/mt7615/mcu.c
>>>> +++ b/drivers/net/wireless/mediatek/mt76/mt7615/mcu.c
>>>> @@ -754,6 +754,7 @@ int mt7615_mcu_set_bss_info(struct mt7615_dev
>>>> *dev,
>>>>
>>>>        switch (vif->type) {
>>>>        case NL80211_IFTYPE_AP:
>>>> +     case NL80211_IFTYPE_MESH_POINT:
>>>>                tx_wlan_idx = mvif->sta.wcid.idx;
>>>>                conn_type = CONNECTION_INFRA_AP;
>>>>                break;
>>>> @@ -968,7 +969,7 @@ int mt7615_mcu_add_wtbl(struct mt7615_dev *dev,
>>>> struct ieee80211_vif *vif,
>>>>                .rx_wtbl = {
>>>>                        .tag = cpu_to_le16(WTBL_RX),
>>>>                        .len = cpu_to_le16(sizeof(struct wtbl_rx)),
>>>> -                     .rca1 = vif->type != NL80211_IFTYPE_AP,
>>>> +                     .rca1 = vif->type == NL80211_IFTYPE_STATION,
>>>>                        .rca2 = 1,
>>>>                        .rv = 1,
>>>>                },
>>>> @@ -1042,6 +1043,7 @@ static void sta_rec_convert_vif_type(enum
>>>> nl80211_iftype type, u32 *conn_type)
>>>>    {
>>>>        switch (type) {
>>>>        case NL80211_IFTYPE_AP:
>>>> +     case NL80211_IFTYPE_MESH_POINT:
>>>>                if (conn_type)
>>>>                        *conn_type = CONNECTION_INFRA_STA;
>>>>                break;
>>>> diff --git a/drivers/net/wireless/mediatek/mt76/mt7615/mcu.h
>>>> b/drivers/net/wireless/mediatek/mt76/mt7615/mcu.h
>>>> index e96efb13fa4d..0915cb735699 100644
>>>> --- a/drivers/net/wireless/mediatek/mt76/mt7615/mcu.h
>>>> +++ b/drivers/net/wireless/mediatek/mt76/mt7615/mcu.h
>>>> @@ -105,25 +105,19 @@ enum {
>>>>    #define STA_TYPE_STA                BIT(0)
>>>>    #define STA_TYPE_AP         BIT(1)
>>>>    #define STA_TYPE_ADHOC              BIT(2)
>>>> -#define STA_TYPE_TDLS                BIT(3)
>>>>    #define STA_TYPE_WDS                BIT(4)
>>>>    #define STA_TYPE_BC         BIT(5)
>>>>
>>>>    #define NETWORK_INFRA               BIT(16)
>>>>    #define NETWORK_P2P         BIT(17)
>>>>    #define NETWORK_IBSS                BIT(18)
>>>> -#define NETWORK_MESH         BIT(19)
>>>> -#define NETWORK_BOW          BIT(20)
>>>>    #define NETWORK_WDS         BIT(21)
>>>>
>>>>    #define CONNECTION_INFRA_STA        (STA_TYPE_STA | NETWORK_INFRA)
>>>>    #define CONNECTION_INFRA_AP (STA_TYPE_AP | NETWORK_INFRA)
>>>>    #define CONNECTION_P2P_GC   (STA_TYPE_STA | NETWORK_P2P)
>>>>    #define CONNECTION_P2P_GO   (STA_TYPE_AP | NETWORK_P2P)
>>>> -#define CONNECTION_MESH_STA  (STA_TYPE_STA | NETWORK_MESH)
>>>> -#define CONNECTION_MESH_AP   (STA_TYPE_AP | NETWORK_MESH)
>>>>    #define CONNECTION_IBSS_ADHOC       (STA_TYPE_ADHOC | NETWORK_IBSS)
>>>> -#define CONNECTION_TDLS              (STA_TYPE_STA | NETWORK_INFRA
>>>> | STA_TYPE_TDLS)
>>>>    #define CONNECTION_WDS              (STA_TYPE_WDS | NETWORK_WDS)
>>>>    #define CONNECTION_INFRA_BC (STA_TYPE_BC | NETWORK_INFRA)
>>>>
>