2008-12-16 07:35:25

by Rami Rosen

[permalink] [raw]
Subject: [PATCH] [v2] iwlwifi: iwl-tx.c cleanup (remove unused parameters).

This patch removes unused parameters in methods in iwl-tx.c:

- remove a parameter (is_unicast) from iwl_tx_cmd_build_basic()
- remove a parameter (sta_id) from iwl_tx_cmd_build_rate()
- remove two parameters (sta_id and priv) from iwl_tx_cmd_build_hwcrypto()

(wireless-testing).

Signed-off-by: Rami Rosen <[email protected]>

diff --git a/drivers/net/wireless/iwlwifi/iwl-tx.c
b/drivers/net/wireless/iwlwifi/iwl-tx.c
index 3cb4363..1d72a19 100644
--- a/drivers/net/wireless/iwlwifi/iwl-tx.c
+++ b/drivers/net/wireless/iwlwifi/iwl-tx.c
@@ -645,7 +645,7 @@ static void iwl_tx_cmd_build_basic(struct iwl_priv *priv,
struct iwl_tx_cmd *tx_cmd,
struct ieee80211_tx_info *info,
struct ieee80211_hdr *hdr,
- int is_unicast, u8 std_id)
+ u8 std_id)
{
__le16 fc = hdr->frame_control;
__le32 tx_flags = tx_cmd->tx_flags;
@@ -705,7 +705,7 @@ static void iwl_tx_cmd_build_basic(struct iwl_priv *priv,
static void iwl_tx_cmd_build_rate(struct iwl_priv *priv,
struct iwl_tx_cmd *tx_cmd,
struct ieee80211_tx_info *info,
- __le16 fc, int sta_id,
+ __le16 fc,
int is_hcca)
{
u32 rate_flags = 0;
@@ -764,11 +764,10 @@ static void iwl_tx_cmd_build_rate(struct iwl_priv *priv,
tx_cmd->rate_n_flags = iwl_hw_set_rate_n_flags(rate_plcp, rate_flags);
}

-static void iwl_tx_cmd_build_hwcrypto(struct iwl_priv *priv,
- struct ieee80211_tx_info *info,
+static void iwl_tx_cmd_build_hwcrypto(struct ieee80211_tx_info *info,
struct iwl_tx_cmd *tx_cmd,
- struct sk_buff *skb_frag,
- int sta_id)
+ struct sk_buff *skb_frag)
+
{
struct ieee80211_key_conf *keyconf = info->control.hw_key;

@@ -834,7 +833,7 @@ int iwl_tx_skb(struct iwl_priv *priv, struct sk_buff *skb)
u16 len, len_org;
u16 seq_number = 0;
__le16 fc;
- u8 hdr_len, unicast;
+ u8 hdr_len;
u8 sta_id;
u8 wait_write_ptr = 0;
u8 tid = 0;
@@ -854,7 +853,6 @@ int iwl_tx_skb(struct iwl_priv *priv, struct sk_buff *skb)
goto drop_unlock;
}

- unicast = !is_multicast_ether_addr(hdr->addr1);

fc = hdr->frame_control;

@@ -977,7 +975,7 @@ int iwl_tx_skb(struct iwl_priv *priv, struct sk_buff *skb)
iwl_hw_txq_attach_buf_to_tfd(priv, tfd, txcmd_phys, len);

if (info->control.hw_key)
- iwl_tx_cmd_build_hwcrypto(priv, info, tx_cmd, skb, sta_id);
+ iwl_tx_cmd_build_hwcrypto(info, tx_cmd, skb);

/* Set up TFD's 2nd entry to point directly to remainder of skb,
* if any (802.11 null frames have no payload). */
@@ -996,10 +994,10 @@ int iwl_tx_skb(struct iwl_priv *priv, struct sk_buff *skb)
len = (u16)skb->len;
tx_cmd->len = cpu_to_le16(len);
/* TODO need this for burst mode later on */
- iwl_tx_cmd_build_basic(priv, tx_cmd, info, hdr, unicast, sta_id);
+ iwl_tx_cmd_build_basic(priv, tx_cmd, info, hdr, sta_id);

/* set is_hcca to 0; it probably will never be implemented */
- iwl_tx_cmd_build_rate(priv, tx_cmd, info, fc, sta_id, 0);
+ iwl_tx_cmd_build_rate(priv, tx_cmd, info, fc, 0);

iwl_update_tx_stats(priv, le16_to_cpu(fc), len);


2008-12-17 21:51:28

by Rami Rosen

[permalink] [raw]
Subject: Re: [PATCH] [v3] iwlwifi: iwl-tx.c cleanup (remove unused parameters).

This patch removes unused parameters in methods in iwl-tx.c:
remove a parameter (is_unicast) from iwl_tx_cmd_build_basic()
remove a parameter (sta_id) from iwl_tx_cmd_build_rate()
remove a parameter (sta_id ) from iwl_tx_cmd_build_hwcrypto()

(This version fixes the build error when compiling with debugging enabled.)

(wireless-testing).

Signed-off-by: Rami Rosen <[email protected]>


diff --git a/drivers/net/wireless/iwlwifi/iwl-tx.c
b/drivers/net/wireless/iwlwifi/iwl-tx.c
index 3cb4363..a1607cd 100644
--- a/drivers/net/wireless/iwlwifi/iwl-tx.c
+++ b/drivers/net/wireless/iwlwifi/iwl-tx.c
@@ -645,7 +645,7 @@ static void iwl_tx_cmd_build_basic(struct iwl_priv *priv,
struct iwl_tx_cmd *tx_cmd,
struct ieee80211_tx_info *info,
struct ieee80211_hdr *hdr,
- int is_unicast, u8 std_id)
+ u8 std_id)
{
__le16 fc = hdr->frame_control;
__le32 tx_flags = tx_cmd->tx_flags;
@@ -705,7 +705,7 @@ static void iwl_tx_cmd_build_basic(struct iwl_priv *priv,
static void iwl_tx_cmd_build_rate(struct iwl_priv *priv,
struct iwl_tx_cmd *tx_cmd,
struct ieee80211_tx_info *info,
- __le16 fc, int sta_id,
+ __le16 fc,
int is_hcca)
{
u32 rate_flags = 0;
@@ -767,8 +767,8 @@ static void iwl_tx_cmd_build_rate(struct iwl_priv *priv,
static void iwl_tx_cmd_build_hwcrypto(struct iwl_priv *priv,
struct ieee80211_tx_info *info,
struct iwl_tx_cmd *tx_cmd,
- struct sk_buff *skb_frag,
- int sta_id)
+ struct sk_buff *skb_frag)
+
{
struct ieee80211_key_conf *keyconf = info->control.hw_key;

@@ -834,7 +834,7 @@ int iwl_tx_skb(struct iwl_priv *priv, struct sk_buff *skb)
u16 len, len_org;
u16 seq_number = 0;
__le16 fc;
- u8 hdr_len, unicast;
+ u8 hdr_len;
u8 sta_id;
u8 wait_write_ptr = 0;
u8 tid = 0;
@@ -854,7 +854,6 @@ int iwl_tx_skb(struct iwl_priv *priv, struct sk_buff *skb)
goto drop_unlock;
}

- unicast = !is_multicast_ether_addr(hdr->addr1);

fc = hdr->frame_control;

@@ -977,7 +976,7 @@ int iwl_tx_skb(struct iwl_priv *priv, struct sk_buff *skb)
iwl_hw_txq_attach_buf_to_tfd(priv, tfd, txcmd_phys, len);

if (info->control.hw_key)
- iwl_tx_cmd_build_hwcrypto(priv, info, tx_cmd, skb, sta_id);
+ iwl_tx_cmd_build_hwcrypto(priv, info, tx_cmd, skb);

/* Set up TFD's 2nd entry to point directly to remainder of skb,
* if any (802.11 null frames have no payload). */
@@ -996,10 +995,10 @@ int iwl_tx_skb(struct iwl_priv *priv, struct sk_buff *skb)
len = (u16)skb->len;
tx_cmd->len = cpu_to_le16(len);
/* TODO need this for burst mode later on */
- iwl_tx_cmd_build_basic(priv, tx_cmd, info, hdr, unicast, sta_id);
+ iwl_tx_cmd_build_basic(priv, tx_cmd, info, hdr, sta_id);

/* set is_hcca to 0; it probably will never be implemented */
- iwl_tx_cmd_build_rate(priv, tx_cmd, info, fc, sta_id, 0);
+ iwl_tx_cmd_build_rate(priv, tx_cmd, info, fc, 0);

iwl_update_tx_stats(priv, le16_to_cpu(fc), len);



On Wed, Dec 17, 2008 at 6:39 PM, John W. Linville
<[email protected]> wrote:
> On Tue, Dec 16, 2008 at 09:35:23AM +0200, Rami Rosen wrote:
>> This patch removes unused parameters in methods in iwl-tx.c:
>>
>> - remove a parameter (is_unicast) from iwl_tx_cmd_build_basic()
>> - remove a parameter (sta_id) from iwl_tx_cmd_build_rate()
>> - remove two parameters (sta_id and priv) from iwl_tx_cmd_build_hwcrypto()
>
> CC [M] drivers/net/wireless/iwlwifi/iwl-tx.o
> drivers/net/wireless/iwlwifi/iwl-tx.c: In function 'iwl_tx_cmd_build_hwcrypto':
> drivers/net/wireless/iwlwifi/iwl-tx.c:780: error: 'priv' undeclared (first use in this function)
> drivers/net/wireless/iwlwifi/iwl-tx.c:780: error: (Each undeclared identifier is reported only once
> drivers/net/wireless/iwlwifi/iwl-tx.c:780: error: for each function it appears in.)
> make[2]: *** [drivers/net/wireless/iwlwifi/iwl-tx.o] Error 1
>
> Did you compile w/ debugging enabled?
>
> John
> --
> John W. Linville Linux should be at the core
> [email protected] of your literate lifestyle.
>

2008-12-17 22:42:39

by Tomas Winkler

[permalink] [raw]
Subject: Re: [PATCH] [v3] iwlwifi: iwl-tx.c cleanup (remove unused parameters).

On Wed, Dec 17, 2008 at 11:51 PM, Rami Rosen <[email protected]> wrote:
> This patch removes unused parameters in methods in iwl-tx.c:
> remove a parameter (is_unicast) from iwl_tx_cmd_build_basic()
> remove a parameter (sta_id) from iwl_tx_cmd_build_rate()
> remove a parameter (sta_id ) from iwl_tx_cmd_build_hwcrypto()

Unicast can go sta_id has to stay, we need it for merging 3945 back
Thanks
Tomas

2008-12-18 15:45:13

by John W. Linville

[permalink] [raw]
Subject: Re: [PATCH] [v3] iwlwifi: iwl-tx.c cleanup (remove unused parameters).

On Thu, Dec 18, 2008 at 12:42:37AM +0200, Tomas Winkler wrote:
> On Wed, Dec 17, 2008 at 11:51 PM, Rami Rosen <[email protected]> wrote:
> > This patch removes unused parameters in methods in iwl-tx.c:
> > remove a parameter (is_unicast) from iwl_tx_cmd_build_basic()
> > remove a parameter (sta_id) from iwl_tx_cmd_build_rate()
> > remove a parameter (sta_id ) from iwl_tx_cmd_build_hwcrypto()
>
> Unicast can go sta_id has to stay, we need it for merging 3945 back

OK, I'll drop this patch and wait for a new submission.

John
--
John W. Linville Linux should be at the core
[email protected] of your literate lifestyle.

2008-12-17 18:45:11

by John W. Linville

[permalink] [raw]
Subject: Re: [PATCH] [v2] iwlwifi: iwl-tx.c cleanup (remove unused parameters).

On Tue, Dec 16, 2008 at 09:35:23AM +0200, Rami Rosen wrote:
> This patch removes unused parameters in methods in iwl-tx.c:
>=20
> - remove a parameter (is_unicast) from iwl_tx_cmd_build_basic()
> - remove a parameter (sta_id) from iwl_tx_cmd_build_rate()
> - remove two parameters (sta_id and priv) from iwl_tx_cmd_build_hwcry=
pto()

CC [M] drivers/net/wireless/iwlwifi/iwl-tx.o
drivers/net/wireless/iwlwifi/iwl-tx.c: In function =E2=80=98iwl_tx_cmd_=
build_hwcrypto=E2=80=99:
drivers/net/wireless/iwlwifi/iwl-tx.c:780: error: =E2=80=98priv=E2=80=99=
undeclared (first use in this function)
drivers/net/wireless/iwlwifi/iwl-tx.c:780: error: (Each undeclared iden=
tifier is reported only once
drivers/net/wireless/iwlwifi/iwl-tx.c:780: error: for each function it =
appears in.)
make[2]: *** [drivers/net/wireless/iwlwifi/iwl-tx.o] Error 1

Did you compile w/ debugging enabled?

John
--=20
John W. Linville Linux should be at the core
[email protected] of your literate lifestyle.