In mt7615_mac_reset_work(), make sure freeing skbs after mt7615_dma_reset().
Signed-off-by: Ryder Lee <[email protected]>
---
changes since v2:
- split v1 into two patches
- remove original mt7615_tx_token_put.
---
drivers/net/wireless/mediatek/mt76/mt7615/pci_mac.c | 6 +++---
1 file changed, 3 insertions(+), 3 deletions(-)
diff --git a/drivers/net/wireless/mediatek/mt76/mt7615/pci_mac.c b/drivers/net/wireless/mediatek/mt76/mt7615/pci_mac.c
index 7694391603dd..baaf734c6950 100644
--- a/drivers/net/wireless/mediatek/mt76/mt7615/pci_mac.c
+++ b/drivers/net/wireless/mediatek/mt76/mt7615/pci_mac.c
@@ -304,12 +304,12 @@ void mt7615_mac_reset_work(struct work_struct *work)
mt7615_hif_int_event_trigger(dev, MT_MCU_INT_EVENT_PDMA_STOPPED);
- mt7615_tx_token_put(dev);
- idr_init(&dev->token);
-
if (mt7615_wait_reset_state(dev, MT_MCU_CMD_RESET_DONE)) {
mt7615_dma_reset(dev);
+ mt7615_tx_token_put(dev);
+ idr_init(&dev->token);
+
mt76_wr(dev, MT_WPDMA_MEM_RNG_ERR, 0);
mt7615_hif_int_event_trigger(dev, MT_MCU_INT_EVENT_PDMA_INIT);
--
2.18.0
We should use ieee80211_free_txskb() to report skb status avoid wrong
aql accounting after reset.
Signed-off-by: Ryder Lee <[email protected]>
---
drivers/net/wireless/mediatek/mt76/mt7615/mac.c | 8 ++++++--
1 file changed, 6 insertions(+), 2 deletions(-)
diff --git a/drivers/net/wireless/mediatek/mt76/mt7615/mac.c b/drivers/net/wireless/mediatek/mt76/mt7615/mac.c
index 60aadf8a09cc..ce71e2c5a8d3 100644
--- a/drivers/net/wireless/mediatek/mt76/mt7615/mac.c
+++ b/drivers/net/wireless/mediatek/mt76/mt7615/mac.c
@@ -2037,8 +2037,12 @@ void mt7615_tx_token_put(struct mt7615_dev *dev)
spin_lock_bh(&dev->token_lock);
idr_for_each_entry(&dev->token, txwi, id) {
mt7615_txp_skb_unmap(&dev->mt76, txwi);
- if (txwi->skb)
- dev_kfree_skb_any(txwi->skb);
+ if (txwi->skb) {
+ struct ieee80211_hw *hw;
+
+ hw = mt76_tx_status_get_hw(&dev->mt76, txwi->skb);
+ ieee80211_free_txskb(hw, txwi->skb);
+ }
mt76_put_txwi(&dev->mt76, txwi);
}
spin_unlock_bh(&dev->token_lock);
--
2.18.0