There are currently 17 kernel-doc warnings on this file:
include/net/cfg80211.h:391: warning: Function parameter or member 'bw' not described in 'ieee80211_eht_mcs_nss_supp'
include/net/cfg80211.h:437: warning: Function parameter or member 'eht_cap' not described in 'ieee80211_sband_iftype_data'
include/net/cfg80211.h:507: warning: Function parameter or member 's1g' not described in 'ieee80211_sta_s1g_cap'
include/net/cfg80211.h:1390: warning: Function parameter or member 'counter_offset_beacon' not described in 'cfg80211_color_change_settings'
include/net/cfg80211.h:1390: warning: Function parameter or member 'counter_offset_presp' not described in 'cfg80211_color_change_settings'
include/net/cfg80211.h:1430: warning: Enum value 'STATION_PARAM_APPLY_STA_TXPOWER' not described in enum 'station_parameters_apply_mask'
include/net/cfg80211.h:2195: warning: Function parameter or member 'dot11MeshConnectedToAuthServer' not described in 'mesh_config'
include/net/cfg80211.h:2341: warning: Function parameter or member 'short_ssid' not described in 'cfg80211_scan_6ghz_params'
include/net/cfg80211.h:3328: warning: Function parameter or member 'kck_len' not described in 'cfg80211_gtk_rekey_data'
include/net/cfg80211.h:3698: warning: Function parameter or member 'ftm' not described in 'cfg80211_pmsr_result'
include/net/cfg80211.h:3828: warning: Function parameter or member 'global_mcast_stypes' not described in 'mgmt_frame_regs'
include/net/cfg80211.h:4977: warning: Function parameter or member 'ftm' not described in 'cfg80211_pmsr_capabilities'
include/net/cfg80211.h:5742: warning: Function parameter or member 'u' not described in 'wireless_dev'
include/net/cfg80211.h:5742: warning: Function parameter or member 'links' not described in 'wireless_dev'
include/net/cfg80211.h:5742: warning: Function parameter or member 'valid_links' not described in 'wireless_dev'
include/net/cfg80211.h:6076: warning: Function parameter or member 'is_amsdu' not described in 'ieee80211_data_to_8023_exthdr'
include/net/cfg80211.h:6949: warning: Function parameter or member 'sig_dbm' not described in 'cfg80211_notify_new_peer_candidate'
Address them, in order to build a better documentation from this
header.
Signed-off-by: Mauro Carvalho Chehab <[email protected]>
---
To avoid mailbombing on a large number of people, only mailing lists were C/C on the cover.
See [PATCH 00/22] at: https://lore.kernel.org/all/[email protected]/
include/net/cfg80211.h | 28 +++++++++++++++++++++-------
1 file changed, 21 insertions(+), 7 deletions(-)
diff --git a/include/net/cfg80211.h b/include/net/cfg80211.h
index 996782c44838..c7e641071eff 100644
--- a/include/net/cfg80211.h
+++ b/include/net/cfg80211.h
@@ -374,6 +374,7 @@ struct ieee80211_sta_he_cap {
* and NSS Set field"
*
* @only_20mhz: MCS/NSS support for 20 MHz-only STA.
+ * @bw: MCS/NSS support for 80, 160 and 320 MHz
* @bw._80: MCS/NSS support for BW <= 80 MHz
* @bw._160: MCS/NSS support for BW = 160 MHz
* @bw._320: MCS/NSS support for BW = 320 MHz
@@ -420,6 +421,7 @@ struct ieee80211_sta_eht_cap {
* @he_cap: holds the HE capabilities
* @he_6ghz_capa: HE 6 GHz capabilities, must be filled in for a
* 6 GHz band channel (and 0 may be valid value).
+ * @eht_cap: STA's EHT capabilities
* @vendor_elems: vendor element(s) to advertise
* @vendor_elems.data: vendor element(s) data
* @vendor_elems.len: vendor element(s) length
@@ -495,7 +497,7 @@ struct ieee80211_edmg {
* This structure describes most essential parameters needed
* to describe 802.11ah S1G capabilities for a STA.
*
- * @s1g_supported: is STA an S1G STA
+ * @s1g: is STA an S1G STA
* @cap: S1G capabilities information
* @nss_mcs: Supported NSS MCS set
*/
@@ -1373,8 +1375,8 @@ struct cfg80211_csa_settings {
* Used for bss color change
*
* @beacon_color_change: beacon data while performing the color countdown
- * @counter_offsets_beacon: offsets of the counters within the beacon (tail)
- * @counter_offsets_presp: offsets of the counters within the probe response
+ * @counter_offset_beacon: offsets of the counters within the beacon (tail)
+ * @counter_offset_presp: offsets of the counters within the probe response
* @beacon_next: beacon data to be used after the color change
* @count: number of beacons until the color change
* @color: the color used after the change
@@ -1417,6 +1419,7 @@ struct iface_combination_params {
* @STATION_PARAM_APPLY_UAPSD: apply new uAPSD parameters (uapsd_queues, max_sp)
* @STATION_PARAM_APPLY_CAPABILITY: apply new capability
* @STATION_PARAM_APPLY_PLINK_STATE: apply new plink state
+ * @STATION_PARAM_APPLY_STA_TXPOWER: apply tx power for STA
*
* Not all station parameters have in-band "no change" signalling,
* for those that don't these flags will are used.
@@ -2149,6 +2152,9 @@ struct bss_parameters {
* @plink_timeout: If no tx activity is seen from a STA we've established
* peering with for longer than this time (in seconds), then remove it
* from the STA's list of peers. Default is 30 minutes.
+ * @dot11MeshConnectedToAuthServer: if set to true then this mesh STA
+ * will advertise that it is connected to a authentication server
+ * in the mesh formation field.
* @dot11MeshConnectedToMeshGate: if set to true, advertise that this STA is
* connected to a mesh gate in mesh formation info. If false, the
* value in mesh formation is determined by the presence of root paths
@@ -2321,12 +2327,12 @@ struct cfg80211_scan_info {
/**
* struct cfg80211_scan_6ghz_params - relevant for 6 GHz only
*
- * @short_bssid: short ssid to scan for
+ * @short_ssid: short ssid to scan for
* @bssid: bssid to scan for
* @channel_idx: idx of the channel in the channel array in the scan request
* which the above info relvant to
* @unsolicited_probe: the AP transmits unsolicited probe response every 20 TU
- * @short_ssid_valid: short_ssid is valid and can be used
+ * @short_ssid_valid: @short_ssid is valid and can be used
* @psc_no_listen: when set, and the channel is a PSC channel, no need to wait
* 20 TUs before starting to send probe requests.
*/
@@ -3317,7 +3323,7 @@ struct cfg80211_wowlan_wakeup {
* @kck: key confirmation key (@kck_len bytes)
* @replay_ctr: replay counter (NL80211_REPLAY_CTR_LEN bytes)
* @kek_len: length of kek
- * @kck_len length of kck
+ * @kck_len: length of kck
* @akm: akm (oui, id)
*/
struct cfg80211_gtk_rekey_data {
@@ -3679,6 +3685,7 @@ struct cfg80211_pmsr_ftm_result {
* @type: type of the measurement reported, note that we only support reporting
* one type at a time, but you can report multiple results separately and
* they're all aggregated for userspace.
+ * @ftm: FTM result
*/
struct cfg80211_pmsr_result {
u64 host_time, ap_tsf;
@@ -3817,7 +3824,7 @@ struct cfg80211_update_owe_info {
* for the entire device
* @interface_stypes: bitmap of management frame subtypes registered
* for the given interface
- * @global_mcast_rx: mcast RX is needed globally for these subtypes
+ * @global_mcast_stypes: mcast RX is needed globally for these subtypes
* @interface_mcast_stypes: mcast RX is needed on this interface
* for these subtypes
*/
@@ -4940,6 +4947,7 @@ struct wiphy_iftype_ext_capab {
* @max_peers: maximum number of peers in a single measurement
* @report_ap_tsf: can report assoc AP's TSF for radio resource measurement
* @randomize_mac_addr: can randomize MAC address for measurement
+ * @ftm: FTM measurement data
* @ftm.supported: FTM measurement is supported
* @ftm.asap: ASAP-mode is supported
* @ftm.non_asap: non-ASAP-mode is supported
@@ -5563,6 +5571,7 @@ static inline void wiphy_unlock(struct wiphy *wiphy)
* @netdev: (private) Used to reference back to the netdev, may be %NULL
* @identifier: (private) Identifier used in nl80211 to identify this
* wireless device if it has no netdev
+ * @u: union containing data specific to @iftype
* @connected_addr: (private) BSSID or AP MLD address if connected
* @connected: indicates if connected or not (STA mode)
* @current_bss: (private) Used by the internal configuration code
@@ -5624,6 +5633,9 @@ static inline void wiphy_unlock(struct wiphy *wiphy)
* @pmsr_free_wk: (private) peer measurements cleanup work
* @unprot_beacon_reported: (private) timestamp of last
* unprotected beacon report
+ * @links: array of %IEEE80211_MLD_MAX_NUM_LINKS elements containing @addr
+ * @ap and @client for each link
+ * @valid_links: bitmap describing what elements of @links are valid
*/
struct wireless_dev {
struct wiphy *wiphy;
@@ -6068,6 +6080,7 @@ unsigned int ieee80211_get_mesh_hdrlen(struct ieee80211s_hdr *meshhdr);
* @addr: the device MAC address
* @iftype: the virtual interface type
* @data_offset: offset of payload after the 802.11 header
+ * @is_amsdu: true if the 802.11 header is A-MSDU
* Return: 0 on success. Non-zero on error.
*/
int ieee80211_data_to_8023_exthdr(struct sk_buff *skb, struct ethhdr *ehdr,
@@ -6937,6 +6950,7 @@ void cfg80211_ibss_joined(struct net_device *dev, const u8 *bssid,
* @macaddr: the MAC address of the new candidate
* @ie: information elements advertised by the peer candidate
* @ie_len: length of the information elements buffer
+ * @sig_dbm: signal level in dBm
* @gfp: allocation flags
*
* This function notifies cfg80211 that the mesh peer candidate has been
--
2.36.1