Hi,
I'm running kernel 4.1 (no code changes in mwifiex) on custom board
with mwrvl sd8787 sdio wifi card. Everything works fine but when I
start hostapd and connect to device from PC and open device webpage I
can see in log many of such messages (~100 same lines):
GET_CMD_NODE: cmd node not available
PREP_CMD: no free cmd node
I'm using fw: 14.66.35.p25
With 3.19 kernel I cannot see any of such messages. Any ideas? Thanks.
BR,
marek
--
as simple and primitive as possible
-------------------------------------------------
Marek Belisko - OPEN-NANDRA
Freelance Developer
Ruska Nova Ves 219 | Presov, 08005 Slovak Republic
Tel: +421 915 052 184
skype: marekwhite
twitter: #opennandra
web: http://open-nandra.com
SGkgQmVsaXNrbywNCg0KPiBJJ20gcnVubmluZyBrZXJuZWwgNC4xIChubyBjb2RlIGNoYW5nZXMg
aW4gbXdpZmlleCkgb24gY3VzdG9tIGJvYXJkIHdpdGgNCj4gbXdydmwgc2Q4Nzg3IHNkaW8gd2lm
aSBjYXJkLiBFdmVyeXRoaW5nIHdvcmtzIGZpbmUgYnV0IHdoZW4gSSBzdGFydA0KPiBob3N0YXBk
IGFuZCBjb25uZWN0IHRvIGRldmljZSBmcm9tIFBDICBhbmQgb3BlbiBkZXZpY2Ugd2VicGFnZSBJ
IGNhbiBzZWUNCj4gaW4gbG9nIG1hbnkgb2Ygc3VjaCBtZXNzYWdlcyAofjEwMCBzYW1lIGxpbmVz
KToNCj4gR0VUX0NNRF9OT0RFOiBjbWQgbm9kZSBub3QgYXZhaWxhYmxlDQo+IFBSRVBfQ01EOiBu
byBmcmVlIGNtZCBub2RlDQoNCkNvdWxkIHlvdSBzaGFyZSBjb21wbGV0ZSBkbWVzZyBsb2c/DQoN
ClJlZ2FyZHMsDQpBbWl0a3VtYXINCg==
Hi Amitkumar,
find below dmesg
On Mon, Aug 31, 2015 at 1:44 PM, Amitkumar Karwar <[email protected]> wrote:
> Hi Belisko,
>
>> I'm running kernel 4.1 (no code changes in mwifiex) on custom board with
>> mwrvl sd8787 sdio wifi card. Everything works fine but when I start
>> hostapd and connect to device from PC and open device webpage I can see
>> in log many of such messages (~100 same lines):
>> GET_CMD_NODE: cmd node not available
>> PREP_CMD: no free cmd node
>
> Could you share complete dmesg log?
>
> Regards,
> Amitkumar
[ 8.014039] udevd[84]: starting version 182
[ 9.951563] cfg80211: Calling CRDA to update world regulatory domain
[ 11.571515] Bluetooth: Vendor=0x2df, Device=0x911a, Class=255, Fn=2
[ 13.111987] cfg80211: Calling CRDA to update world regulatory domain
[ 16.271552] cfg80211: Calling CRDA to update world regulatory domain
[ 17.062728] random: nonblocking pool is initialized
[ 17.302971] Bluetooth: FW download over, size 456660 bytes
[ 17.953975] mwifiex_sdio mmc0:0001:1: WLAN FW already running! Skip FW dnld
[ 17.954011] mwifiex_sdio mmc0:0001:1: WLAN FW is active
[ 18.067233] ieee80211 phy0: ignoring F/W country code US
[ 18.148485] mwifiex_sdio mmc0:0001:1: driver_version = mwifiex 1.0
(14.66.35.p25)
[ 19.432103] cfg80211: Calling CRDA to update world regulatory domain
[ 22.594066] cfg80211: Calling CRDA to update world regulatory domain
[ 25.751568] cfg80211: Calling CRDA to update world regulatory domain
[ 28.911566] cfg80211: Calling CRDA to update world regulatory domain
[ 29.533669] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
[ 30.069695] net eth0: initializing cpsw version 1.12 (0)
[ 30.170530] net eth0: phy found : id is : 0x4dd076
[ 30.170779] libphy: PHY not found
[ 30.175233] net eth0: phy not found on slave 1
[ 30.188658] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 30.658135] net eth0: initializing cpsw version 1.12 (0)
[ 30.733308] net eth0: phy found : id is : 0x4dd076
[ 30.733523] libphy: PHY not found
[ 30.737088] net eth0: phy not found on slave 1
[ 30.788634] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 32.071633] cfg80211: Calling CRDA to update world regulatory domain
[ 35.231609] cfg80211: Exceeded CRDA call max attempts. Not calling CRDA
[ 44.044608] IPv6: ADDRCONF(NETDEV_UP): uap0: link is not ready
[ 44.265485] net eth0: initializing cpsw version 1.12 (0)
[ 44.343401] net eth0: phy found : id is : 0x4dd076
[ 44.343620] libphy: PHY not found
[ 44.347189] net eth0: phy not found on slave 1
[ 44.391060] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 44.637269] IPv6: ADDRCONF(NETDEV_UP): uap0: link is not ready
[ 66.680521] IPv6: ADDRCONF(NETDEV_CHANGE): uap0: link becomes ready
[ 181.559447] mwifiex_sdio mmc0:0001:1: GET_CMD_NODE: cmd node not available
[ 181.566655] mwifiex_sdio mmc0:0001:1: PREP_CMD: no free cmd node
[ 181.577016] mwifiex_sdio mmc0:0001:1: GET_CMD_NODE: cmd node not available
[ 181.584219] mwifiex_sdio mmc0:0001:1: PREP_CMD: no free cmd node
[ 181.596305] mwifiex_sdio mmc0:0001:1: GET_CMD_NODE: cmd node not available
[ 181.603518] mwifiex_sdio mmc0:0001:1: PREP_CMD: no free cmd node
[ 181.616659] mwifiex_sdio mmc0:0001:1: GET_CMD_NODE: cmd node not available
[ 181.623871] mwifiex_sdio mmc0:0001:1: PREP_CMD: no free cmd node
[ 181.630337] mwifiex_sdio mmc0:0001:1: GET_CMD_NODE: cmd node not available
[ 181.637520] mwifiex_sdio mmc0:0001:1: PREP_CMD: no free cmd node
[ 181.643923] mwifiex_sdio mmc0:0001:1: GET_CMD_NODE: cmd node not available
[ 181.651103] mwifiex_sdio mmc0:0001:1: PREP_CMD: no free cmd node
[ 181.657904] mwifiex_sdio mmc0:0001:1: GET_CMD_NODE: cmd node not available
[ 181.665091] mwifiex_sdio mmc0:0001:1: PREP_CMD: no free cmd node
[ 181.671702] mwifiex_sdio mmc0:0001:1: GET_CMD_NODE: cmd node not available
[ 181.678887] mwifiex_sdio mmc0:0001:1: PREP_CMD: no free cmd node
[ 181.699303] mwifiex_sdio mmc0:0001:1: GET_CMD_NODE: cmd node not available
[ 181.706515] mwifiex_sdio mmc0:0001:1: PREP_CMD: no free cmd node
[ 181.718104] mwifiex_sdio mmc0:0001:1: GET_CMD_NODE: cmd node not available
[ 181.725309] mwifiex_sdio mmc0:0001:1: PREP_CMD: no free cmd node
[ 181.734723] mwifiex_sdio mmc0:0001:1: GET_CMD_NODE: cmd node not available
[ 181.741922] mwifiex_sdio mmc0:0001:1: PREP_CMD: no free cmd node
[ 181.752621] mwifiex_sdio mmc0:0001:1: GET_CMD_NODE: cmd node not available
[ 181.759828] mwifiex_sdio mmc0:0001:1: PREP_CMD: no free cmd node
[ 181.769583] mwifiex_sdio mmc0:0001:1: GET_CMD_NODE: cmd node not available
[ 181.776787] mwifiex_sdio mmc0:0001:1: PREP_CMD: no free cmd node
[ 181.784389] mwifiex_sdio mmc0:0001:1: GET_CMD_NODE: cmd node not available
[ 181.791585] mwifiex_sdio mmc0:0001:1: PREP_CMD: no free cmd node
[ 181.806670] mwifiex_sdio mmc0:0001:1: GET_CMD_NODE: cmd node not available
[ 181.813876] mwifiex_sdio mmc0:0001:1: PREP_CMD: no free cmd node
[ 181.823657] mwifiex_sdio mmc0:0001:1: GET_CMD_NODE: cmd node not available
[ 181.830861] mwifiex_sdio mmc0:0001:1: PREP_CMD: no free cmd node
[ 181.841200] mwifiex_sdio mmc0:0001:1: GET_CMD_NODE: cmd node not available
[ 181.848400] mwifiex_sdio mmc0:0001:1: PREP_CMD: no free cmd node
[ 181.861088] mwifiex_sdio mmc0:0001:1: GET_CMD_NODE: cmd node not available
[ 181.868291] mwifiex_sdio mmc0:0001:1: PREP_CMD: no free cmd node
[ 181.877331] mwifiex_sdio mmc0:0001:1: GET_CMD_NODE: cmd node not available
[ 181.884533] mwifiex_sdio mmc0:0001:1: PREP_CMD: no free cmd node
[ 181.891671] mwifiex_sdio mmc0:0001:1: GET_CMD_NODE: cmd node not available
[ 181.898854] mwifiex_sdio mmc0:0001:1: PREP_CMD: no free cmd node
[ 181.907407] mwifiex_sdio mmc0:0001:1: GET_CMD_NODE: cmd node not available
[ 181.914605] mwifiex_sdio mmc0:0001:1: PREP_CMD: no free cmd node
[ 181.921423] mwifiex_sdio mmc0:0001:1: GET_CMD_NODE: cmd node not available
[ 181.928607] mwifiex_sdio mmc0:0001:1: PREP_CMD: no free cmd node
[ 181.942009] mwifiex_sdio mmc0:0001:1: GET_CMD_NODE: cmd node not available
[ 181.949218] mwifiex_sdio mmc0:0001:1: PREP_CMD: no free cmd node
[ 181.958798] mwifiex_sdio mmc0:0001:1: GET_CMD_NODE: cmd node not available
[ 181.966000] mwifiex_sdio mmc0:0001:1: PREP_CMD: no free cmd node
[ 181.978141] mwifiex_sdio mmc0:0001:1: GET_CMD_NODE: cmd node not available
[ 181.985344] mwifiex_sdio mmc0:0001:1: PREP_CMD: no free cmd node
[ 181.995284] mwifiex_sdio mmc0:0001:1: GET_CMD_NODE: cmd node not available
[ 182.002488] mwifiex_sdio mmc0:0001:1: PREP_CMD: no free cmd node
[ 182.014523] mwifiex_sdio mmc0:0001:1: GET_CMD_NODE: cmd node not available
[ 182.021731] mwifiex_sdio mmc0:0001:1: PREP_CMD: no free cmd node
[ 182.031546] mwifiex_sdio mmc0:0001:1: GET_CMD_NODE: cmd node not available
[ 182.038753] mwifiex_sdio mmc0:0001:1: PREP_CMD: no free cmd node
[ 182.050719] mwifiex_sdio mmc0:0001:1: GET_CMD_NODE: cmd node not available
[ 182.057923] mwifiex_sdio mmc0:0001:1: PREP_CMD: no free cmd node
[ 182.069146] mwifiex_sdio mmc0:0001:1: GET_CMD_NODE: cmd node not available
[ 182.076350] mwifiex_sdio mmc0:0001:1: PREP_CMD: no free cmd node
[ 182.085102] mwifiex_sdio mmc0:0001:1: GET_CMD_NODE: cmd node not available
[ 182.092297] mwifiex_sdio mmc0:0001:1: PREP_CMD: no free cmd node
[ 182.103276] mwifiex_sdio mmc0:0001:1: GET_CMD_NODE: cmd node not available
[ 182.110478] mwifiex_sdio mmc0:0001:1: PREP_CMD: no free cmd node
[ 182.121156] mwifiex_sdio mmc0:0001:1: GET_CMD_NODE: cmd node not available
[ 182.128360] mwifiex_sdio mmc0:0001:1: PREP_CMD: no free cmd node
[ 182.134750] mwifiex_sdio mmc0:0001:1: GET_CMD_NODE: cmd node not available
[ 182.141927] mwifiex_sdio mmc0:0001:1: PREP_CMD: no free cmd node
BR,
marek
--
as simple and primitive as possible
-------------------------------------------------
Marek Belisko - OPEN-NANDRA
Freelance Developer
Ruska Nova Ves 219 | Presov, 08005 Slovak Republic
Tel: +421 915 052 184
skype: marekwhite
twitter: #opennandra
web: http://open-nandra.com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Hi Amit,
On Fri, Sep 4, 2015 at 8:10 AM, Amitkumar Karwar <[email protected]> wrote:
> Hi Marty,
>
> Could you please enable debug logs using below command and share complete log?
>
> echo "0xffffffff" > /sys/kernel/debug/mwifiex/mlan0/debug_mask
>
> It should contain normal behavior followed by "cmd node not available" errors.
>
Here you go. Let me know if you need more info.
[ 208.661000] mwifiex_sdio mmc1:0001:1: info: RX: port=4 rx_len=1608
[ 208.662000] mwifiex_sdio mmc1:0001:1: info:
mwifiex_sdio_card_to_host_mp_aggr: not last packet
[ 208.662000] mwifiex_sdio mmc1:0001:1: info: current packet aggregation
[ 208.662000] mwifiex_sdio mmc1:0001:1: data: mp_rd_bitmap=0x00000e00
[ 208.662000] mwifiex_sdio mmc1:0001:1: data: port=9
mp_rd_bitmap=0x00000e00 -> 0x00000c00
[ 208.662000] mwifiex_sdio mmc1:0001:1: info: RX: port=9 rx_len=1608
[ 208.662000] mwifiex_sdio mmc1:0001:1: info: rx_len = 1792
[ 208.662000] mwifiex_sdio mmc1:0001:1: info:
mwifiex_sdio_card_to_host_mp_aggr: not last packet
[ 208.662000] mwifiex_sdio mmc1:0001:1: info: current packet aggregation
[ 208.662000] mwifiex_sdio mmc1:0001:1: data: mp_rd_bitmap=0x00000c00
[ 208.662000] mwifiex_sdio mmc1:0001:1: data: port=10
mp_rd_bitmap=0x00000c00 -> 0x00000800
[ 208.662000] mwifiex_sdio mmc1:0001:1: info: RX: port=10 rx_len=1608
[ 208.662000] mwifiex_sdio mmc1:0001:1: info: rx_len = 1792
[ 208.662000] mwifiex_sdio mmc1:0001:1: info:
mwifiex_sdio_card_to_host_mp_aggr: not last packet
[ 208.662000] mwifiex_sdio mmc1:0001:1: info: current packet aggregation
[ 208.662000] mwifiex_sdio mmc1:0001:1: data: mp_rd_bitmap=0x00000800
[ 208.662000] mwifiex_sdio mmc1:0001:1: data: port=11
mp_rd_bitmap=0x00000800 -> 0x00000000
[ 208.662000] mwifiex_sdio mmc1:0001:1: info: RX: port=11 rx_len=1608
[ 208.662000] mwifiex_sdio mmc1:0001:1: info: rx_len = 1792
[ 208.662000] mwifiex_sdio mmc1:0001:1: info:
mwifiex_sdio_card_to_host_mp_aggr: last packet
[ 208.662000] mwifiex_sdio mmc1:0001:1: info: current packet aggregation
[ 208.662000] mwifiex_sdio mmc1:0001:1: info:
mwifiex_sdio_card_to_host_mp_aggr: aggregated packet limit reached
[ 208.662000] mwifiex_sdio mmc1:0001:1: info: do_rx_aggr: num of packets: 16
[ 208.663000] mwifiex_sdio mmc1:0001:1: info: --- Rx: Data packet ---
[ 208.663000] mwifiex_sdio mmc1:0001:1: info: --- Rx: Data packet ---
[ 208.663000] mwifiex_sdio mmc1:0001:1: info: --- Rx: Data packet ---
[ 208.663000] mwifiex_sdio mmc1:0001:1: info: --- Rx: Data packet ---
[ 208.663000] mwifiex_sdio mmc1:0001:1: info: --- Rx: Data packet ---
[ 208.663000] mwifiex_sdio mmc1:0001:1: info: --- Rx: Data packet ---
[ 208.663000] mwifiex_sdio mmc1:0001:1: info: --- Rx: Data packet ---
[ 208.663000] mwifiex_sdio mmc1:0001:1: info: --- Rx: Data packet ---
[ 208.663000] mwifiex_sdio mmc1:0001:1: info: --- Rx: Data packet ---
[ 208.663000] mwifiex_sdio mmc1:0001:1: info: --- Rx: Data packet ---
[ 208.663000] mwifiex_sdio mmc1:0001:1: info: --- Rx: Data packet ---
[ 208.663000] mwifiex_sdio mmc1:0001:1: info: --- Rx: Data packet ---
[ 208.664000] mwifiex_sdio mmc1:0001:1: info: --- Rx: Data packet ---
[ 208.664000] mwifiex_sdio mmc1:0001:1: info: --- Rx: Data packet ---
[ 208.664000] mwifiex_sdio mmc1:0001:1: info: --- Rx: Data packet ---
[ 208.664000] mwifiex_sdio mmc1:0001:1: info: --- Rx: Data packet ---
[ 208.664000] mwifiex_sdio mmc1:0001:1: data: mp_rd_bitmap=0x00000000
[ 208.664000] mwifiex_sdio mmc1:0001:1: info: no more rd_port available
[ 208.664000] mwifiex_sdio mmc1:0001:1: EVENT: cause: 0x74
[ 208.664000] mwifiex_sdio mmc1:0001:1: event: TX_STATUS Report
[ 208.664000] mwifiex_sdio mmc1:0001:1: int: sdio_ireg = 0x41
[ 208.664000] mwifiex_sdio mmc1:0001:1: info: rx_len = 256
[ 208.664000] mwifiex_sdio mmc1:0001:1: data: 4294875960 BSS(1-0):
Data <= kernel
[ 208.664000] mwifiex_sdio mmc1:0001:1: info: --- Rx: Cmd Response ---
[ 208.664000] mwifiex_sdio mmc1:0001:1: info: cmd_sent=0 data_sent=0
[ 208.664000] mwifiex_sdio mmc1:0001:1: int: UPLD: rd_bitmap=0xffff000
[ 208.664000] mwifiex_sdio mmc1:0001:1: data: mp_rd_bitmap=0x0ffff000
[ 208.664000] mwifiex_sdio mmc1:0001:1: data: 4294875960 BSS(1-0):
Data <= kernel
[ 208.664000] mwifiex_sdio mmc1:0001:1: data: port=12
mp_rd_bitmap=0x0ffff000 -> 0x0fffe000
[ 208.664000] mwifiex_sdio mmc1:0001:1: info: RX: port=12 rx_len=37904
[ 208.664000] mwifiex_sdio mmc1:0001:1: info: rx_len = 38144
[ 208.664000] hostapd-wlan0: Event TX_STATUS (17) received
[ 208.664000] mwifiex_sdio mmc1:0001:1: info:
mwifiex_sdio_card_to_host_mp_aggr: not last packet
[ 208.665000] mwifiex_sdio mmc1:0001:1: data: 4294875961 BSS(1-0):
Data <= kernel
[ 208.665000] mwifiex_sdio mmc1:0001:1: data: 4294875961 BSS(1-0):
Data <= kernel
[ 208.665000] mwifiex_sdio mmc1:0001:1: info: current packet aggregation
[ 208.665000] mwifiex_sdio mmc1:0001:1: data: mp_rd_bitmap=0x0fffe000
[ 208.665000] mwifiex_sdio mmc1:0001:1: data: port=13
mp_rd_bitmap=0x0fffe000 -> 0x0fffc000
[ 208.665000] mwifiex_sdio mmc1:0001:1: data: 4294875961 BSS(1-0):
Data <= kernel
[ 208.665000] mwifiex_sdio mmc1:0001:1: data: 4294875961 BSS(1-0):
Data <= kernel
[ 208.665000] mwifiex_sdio mmc1:0001:1: info: RX: port=13 rx_len=1608
[ 208.665000] mwifiex_sdio mmc1:0001:1: info: rx_len = 1792
[ 208.665000] mwifiex_sdio mmc1:0001:1: info:
mwifiex_sdio_card_to_host_mp_aggr: not last packet
[ 208.665000] mwifiex_sdio mmc1:0001:1: info: current packet aggregation
[ 208.665000] mwifiex_sdio mmc1:0001:1: data: 4294875961 BSS(1-0):
Data <= kernel
[ 208.665000] mwifiex_sdio mmc1:0001:1: data: mp_rd_bitmap=0x0fffc000
[ 208.665000] mwifiex_sdio mmc1:0001:1: data: port=14
mp_rd_bitmap=0x0fffc000 -> 0x0fff8000
[ 208.665000] mwifiex_sdio mmc1:0001:1: info: RX: port=14 rx_len=1608
[ 208.665000] mwifiex_sdio mmc1:0001:1: info: rx_len = 1792
[ 208.665000] mwifiex_sdio mmc1:0001:1: info:
mwifiex_sdio_card_to_host_mp_aggr: not last packet
[ 208.665000] mwifiex_sdio mmc1:0001:1: info: current packet aggregation
[ 208.665000] mwifiex_sdio mmc1:0001:1: data: 4294875961 BSS(1-0):
Data <= kernel
[ 208.665000] mwifiex_sdio mmc1:0001:1: data: mp_rd_bitmap=0x0fff8000
[ 208.665000] mwifiex_sdio mmc1:0001:1: data: port=15
mp_rd_bitmap=0x0fff8000 -> 0x0fff0000
[ 208.665000] mwifiex_sdio mmc1:0001:1: info: RX: port=15 rx_len=1608
[ 208.665000] mwifiex_sdio mmc1:0001:1: info: rx_len = 1792
[ 208.666000] mwifiex_sdio mmc1:0001:1: data: 4294875962 BSS(1-0):
Data <= kernel
[ 208.666000] mwifiex_sdio mmc1:0001:1: info:
mwifiex_sdio_card_to_host_mp_aggr: not last packet
[ 208.666000] mwifiex_sdio mmc1:0001:1: info: current packet aggregation
[ 208.666000] mwifiex_sdio mmc1:0001:1: data: mp_rd_bitmap=0x0fff0000
[ 208.666000] mwifiex_sdio mmc1:0001:1: data: port=16
mp_rd_bitmap=0x0fff0000 -> 0x0ffe0000
[ 208.666000] mwifiex_sdio mmc1:0001:1: info: RX: port=16 rx_len=1608
[ 208.666000] mwifiex_sdio mmc1:0001:1: info: rx_len = 1792
[ 208.666000] mwifiex_sdio mmc1:0001:1: info:
mwifiex_sdio_card_to_host_mp_aggr: not last packet
[ 208.666000] mwifiex_sdio mmc1:0001:1: info: current packet aggregation
[ 208.666000] mwifiex_sdio mmc1:0001:1: data: 4294875962 BSS(1-0):
Data <= kernel
[ 208.666000] mwifiex_sdio mmc1:0001:1: data: mp_rd_bitmap=0x0ffe0000
[ 208.666000] mwifiex_sdio mmc1:0001:1: data: port=17
mp_rd_bitmap=0x0ffe0000 -> 0x0ffc0000
[ 208.666000] mwifiex_sdio mmc1:0001:1: info: RX: port=17 rx_len=1608
[ 208.666000] mwifiex_sdio mmc1:0001:1: info: rx_len = 1792
[ 208.666000] mwifiex_sdio mmc1:0001:1: info:
mwifiex_sdio_card_to_host_mp_aggr: not last packet
[ 208.666000] mwifiex_sdio mmc1:0001:1: info: current packet aggregation
[ 208.666000] mwifiex_sdio mmc1:0001:1: data: 4294875962 BSS(1-0):
Data <= kernel
[ 208.666000] mwifiex_sdio mmc1:0001:1: data: mp_rd_bitmap=0x0ffc0000
[ 208.666000] mwifiex_sdio mmc1:0001:1: data: port=18
mp_rd_bitmap=0x0ffc0000 -> 0x0ff80000
[ 208.666000] mwifiex_sdio mmc1:0001:1: info: RX: port=18 rx_len=1608
[ 208.666000] mwifiex_sdio mmc1:0001:1: info: rx_len = 1792
[ 208.666000] mwifiex_sdio mmc1:0001:1: info:
mwifiex_sdio_card_to_host_mp_aggr: not last packet
[ 208.666000] mwifiex_sdio mmc1:0001:1: info: current packet aggregation
[ 208.666000] mwifiex_sdio mmc1:0001:1: data: mp_rd_bitmap=0x0ff80000
[ 208.666000] mwifiex_sdio mmc1:0001:1: data: port=19
mp_rd_bitmap=0x0ff80000 -> 0x0ff00000
[ 208.666000] mwifiex_sdio mmc1:0001:1: info: RX: port=19 rx_len=1608
[ 208.666000] mwifiex_sdio mmc1:0001:1: info: rx_len = 1792
[ 208.666000] mwifiex_sdio mmc1:0001:1: info:
mwifiex_sdio_card_to_host_mp_aggr: not last packet
[ 208.666000] mwifiex_sdio mmc1:0001:1: info: current packet aggregation
[ 208.666000] mwifiex_sdio mmc1:0001:1: data: mp_rd_bitmap=0x0ff00000
[ 208.666000] mwifiex_sdio mmc1:0001:1: data: port=20
mp_rd_bitmap=0x0ff00000 -> 0x0fe00000
[ 208.666000] mwifiex_sdio mmc1:0001:1: info: RX: port=20 rx_len=1608
[ 208.667000] mwifiex_sdio mmc1:0001:1: info: rx_len = 1792
[ 208.667000] mwifiex_sdio mmc1:0001:1: info:
mwifiex_sdio_card_to_host_mp_aggr: not last packet
[ 208.667000] mwifiex_sdio mmc1:0001:1: info: current packet aggregation
[ 208.667000] mwifiex_sdio mmc1:0001:1: data: mp_rd_bitmap=0x0fe00000
[ 208.667000] mwifiex_sdio mmc1:0001:1: data: port=21
mp_rd_bitmap=0x0fe00000 -> 0x0fc00000
[ 208.667000] mwifiex_sdio mmc1:0001:1: info: RX: port=21 rx_len=1608
[ 208.667000] mwifiex_sdio mmc1:0001:1: info: rx_len = 1792
[ 208.667000] mwifiex_sdio mmc1:0001:1: info:
mwifiex_sdio_card_to_host_mp_aggr: not last packet
[ 208.667000] mwifiex_sdio mmc1:0001:1: info: current packet aggregation
[ 208.667000] mwifiex_sdio mmc1:0001:1: data: mp_rd_bitmap=0x0fc00000
[ 208.667000] mwifiex_sdio mmc1:0001:1: data: port=22
mp_rd_bitmap=0x0fc00000 -> 0x0f800000
[ 208.667000] mwifiex_sdio mmc1:0001:1: info: RX: port=22 rx_len=1608
[ 208.667000] mwifiex_sdio mmc1:0001:1: info: rx_len = 1792
[ 208.667000] mwifiex_sdio mmc1:0001:1: info:
mwifiex_sdio_card_to_host_mp_aggr: not last packet
[ 208.667000] mwifiex_sdio mmc1:0001:1: info: current packet aggregation
[ 208.667000] mwifiex_sdio mmc1:0001:1: data: mp_rd_bitmap=0x0f800000
[ 208.667000] mwifiex_sdio mmc1:0001:1: data: port=23
mp_rd_bitmap=0x0f800000 -> 0x0f000000
[ 208.667000] mwifiex_sdio mmc1:0001:1: info: RX: port=23 rx_len=1608
[ 208.667000] mwifiex_sdio mmc1:0001:1: info: rx_len = 1792
[ 208.667000] mwifiex_sdio mmc1:0001:1: info:
mwifiex_sdio_card_to_host_mp_aggr: not last packet
[ 208.667000] mwifiex_sdio mmc1:0001:1: info: current packet aggregation
[ 208.667000] mwifiex_sdio mmc1:0001:1: data: mp_rd_bitmap=0x0f000000
[ 208.667000] mwifiex_sdio mmc1:0001:1: data: port=24
mp_rd_bitmap=0x0f000000 -> 0x0e000000
[ 208.667000] mwifiex_sdio mmc1:0001:1: info: RX: port=24 rx_len=1608
[ 208.667000] mwifiex_sdio mmc1:0001:1: info: rx_len = 1792
[ 208.667000] mwifiex_sdio mmc1:0001:1: info:
mwifiex_sdio_card_to_host_mp_aggr: not last packet
[ 208.667000] mwifiex_sdio mmc1:0001:1: info: current packet aggregation
[ 208.667000] mwifiex_sdio mmc1:0001:1: data: mp_rd_bitmap=0x0e000000
[ 208.667000] mwifiex_sdio mmc1:0001:1: data: port=25
mp_rd_bitmap=0x0e000000 -> 0x0c000000
[ 208.667000] mwifiex_sdio mmc1:0001:1: info: RX: port=25 rx_len=1608
[ 208.667000] mwifiex_sdio mmc1:0001:1: info: rx_len = 1792
[ 208.667000] mwifiex_sdio mmc1:0001:1: info:
mwifiex_sdio_card_to_host_mp_aggr: not last packet
[ 208.667000] mwifiex_sdio mmc1:0001:1: info: current packet aggregation
[ 208.667000] mwifiex_sdio mmc1:0001:1: data: mp_rd_bitmap=0x0c000000
[ 208.667000] mwifiex_sdio mmc1:0001:1: data: port=26
mp_rd_bitmap=0x0c000000 -> 0x08000000
[ 208.667000] mwifiex_sdio mmc1:0001:1: info: RX: port=26 rx_len=1608
[ 208.668000] mwifiex_sdio mmc1:0001:1: info: rx_len = 1792
[ 208.668000] mwifiex_sdio mmc1:0001:1: info:
mwifiex_sdio_card_to_host_mp_aggr: not last packet
[ 208.668000] mwifiex_sdio mmc1:0001:1: info: current packet aggregation
[ 208.668000] mwifiex_sdio mmc1:0001:1: data: mp_rd_bitmap=0x08000000
[ 208.668000] mwifiex_sdio mmc1:0001:1: data: port=27
mp_rd_bitmap=0x08000000 -> 0x00000000
[ 208.668000] mwifiex_sdio mmc1:0001:1: info: RX: port=27 rx_len=1608
[ 208.668000] mwifiex_sdio mmc1:0001:1: info: rx_len = 1792
[ 208.668000] mwifiex_sdio mmc1:0001:1: info:
mwifiex_sdio_card_to_host_mp_aggr: last packet
[ 208.668000] mwifiex_sdio mmc1:0001:1: info: current packet aggregation
[ 208.668000] mwifiex_sdio mmc1:0001:1: info:
mwifiex_sdio_card_to_host_mp_aggr: aggregated packet limit reached
[ 208.668000] mwifiex_sdio mmc1:0001:1: info: do_rx_aggr: num of packets: 16
[ 208.669000] mwifiex_sdio mmc1:0001:1: info: --- Rx: Aggr Data packet ---
[ 208.669000] mwifiex_sdio mmc1:0001:1: info: --- Rx: Data packet ---
[ 208.669000] mwifiex_sdio mmc1:0001:1: info: --- Rx: Data packet ---
[ 208.669000] mwifiex_sdio mmc1:0001:1: info: --- Rx: Data packet ---
[ 208.670000] mwifiex_sdio mmc1:0001:1: info: --- Rx: Data packet ---
[ 208.670000] mwifiex_sdio mmc1:0001:1: info: --- Rx: Data packet ---
[ 208.670000] mwifiex_sdio mmc1:0001:1: info: --- Rx: Data packet ---
[ 208.670000] mwifiex_sdio mmc1:0001:1: info: --- Rx: Data packet ---
[ 208.670000] mwifiex_sdio mmc1:0001:1: info: --- Rx: Data packet ---
[ 208.670000] mwifiex_sdio mmc1:0001:1: info: --- Rx: Data packet ---
[ 208.670000] mwifiex_sdio mmc1:0001:1: info: --- Rx: Data packet ---
[ 208.670000] mwifiex_sdio mmc1:0001:1: info: --- Rx: Data packet ---
[ 208.670000] mwifiex_sdio mmc1:0001:1: info: --- Rx: Data packet ---
[ 208.670000] mwifiex_sdio mmc1:0001:1: info: --- Rx: Data packet ---
[ 208.670000] mwifiex_sdio mmc1:0001:1: info: --- Rx: Data packet ---
[ 208.670000] mwifiex_sdio mmc1:0001:1: info: --- Rx: Data packet ---
[ 208.670000] mwifiex_sdio mmc1:0001:1: data: mp_rd_bitmap=0x00000000
[ 208.670000] mwifiex_sdio mmc1:0001:1: info: no more rd_port available
[ 208.670000] mwifiex_sdio mmc1:0001:1: cmd: CMD_RESP: 0x80ce, result
0, len 24, seqno 0x101d
[ 208.670000] mwifiex_sdio mmc1:0001:1: info: BA stream complete
[ 208.670000] mwifiex_sdio mmc1:0001:1: cmd: FREE_CMD: cmd=0xce, cmd_pending=49
[ 208.670000] mwifiex_sdio mmc1:0001:1: cmd: DNLD_CMD: 0xce, act
0x8000, len 22, seqno 0x101e
[ 208.670000] mwifiex_sdio mmc1:0001:1: info:
mwifiex_host_to_card_mp_aggr: tx aggregation disabled
[ 208.670000] mwifiex_sdio mmc1:0001:1: data:
mwifiex_host_to_card_mp_aggr: send current buffer 32768
[ 208.670000] mwifiex_sdio mmc1:0001:1: data: tid=0
[ 208.670000] mwifiex_sdio mmc1:0001:1: cmd: mwifiex_send_addba: tid 0
[ 208.670000] mwifiex_sdio mmc1:0001:1: cmd: QUEUE_CMD: cmd=0xce,
cmd_pending=50
[ 208.671000] mwifiex_sdio mmc1:0001:1: data: 4294875967 BSS(1-0):
Data <= kernel
[ 208.671000] mwifiex_sdio mmc1:0001:1: data: WMM: Pkt Delay: 0 ms, 0
ms sent to FW
[ 208.671000] mwifiex_sdio mmc1:0001:1: data: mp_wr_bitmap=0xffffff80
[ 208.671000] mwifiex_sdio mmc1:0001:1: data: port=7
mp_wr_bitmap=0xffffff80 -> 0xffffff00
[ 208.671000] mwifiex_sdio mmc1:0001:1: info:
mwifiex_host_to_card_mp_aggr: Last packet in Tx Queue.
[ 208.671000] mwifiex_sdio mmc1:0001:1: data:
mwifiex_host_to_card_mp_aggr: send current buffer 7
[ 208.671000] mwifiex_sdio mmc1:0001:1: data: 4294875967 BSS(1-0):
Data <= kernel
[ 208.671000] mwifiex_sdio mmc1:0001:1: data: tid=0
[ 208.671000] mwifiex_sdio mmc1:0001:1: cmd: mwifiex_send_addba: tid 0
[ 208.671000] mwifiex_sdio mmc1:0001:1: GET_CMD_NODE: cmd node not available
[ 208.671000] mwifiex_sdio mmc1:0001:1: PREP_CMD: no free cmd node
[ 208.671000] mwifiex_sdio mmc1:0001:1: data: dequeuing the packet
cc704300 cc6ac800
[ 208.671000] mwifiex_sdio mmc1:0001:1: data: WMM: Pkt Delay: 0 ms, 0
ms sent to FW
[ 208.671000] mwifiex_sdio mmc1:0001:1: data: mp_wr_bitmap=0xffffff00
[ 208.671000] mwifiex_sdio mmc1:0001:1: data: port=8
mp_wr_bitmap=0xffffff00 -> 0xfffffe00
[ 208.671000] mwifiex_sdio mmc1:0001:1: data: 4294875967 BSS(1-0):
Data <= kernel
[ 208.671000] mwifiex_sdio mmc1:0001:1: info:
mwifiex_host_to_card_mp_aggr: Last packet in Tx Queue.
[ 208.671000] mwifiex_sdio mmc1:0001:1: data:
mwifiex_host_to_card_mp_aggr: send current buffer 8
[ 208.671000] mwifiex_sdio mmc1:0001:1: data: tid=0
[ 208.671000] mwifiex_sdio mmc1:0001:1: cmd: mwifiex_send_addba: tid 0
[ 208.671000] mwifiex_sdio mmc1:0001:1: GET_CMD_NODE: cmd node not available
[ 208.671000] mwifiex_sdio mmc1:0001:1: PREP_CMD: no free cmd node
[ 208.671000] mwifiex_sdio mmc1:0001:1: data: dequeuing the packet
cc704300 cc6acd00
[ 208.671000] mwifiex_sdio mmc1:0001:1: data: 4294875967 BSS(1-0):
Data <= kernel
[ 208.671000] mwifiex_sdio mmc1:0001:1: data: 4294875967 BSS(1-0):
Data <= kernel
[ 208.672000] mwifiex_sdio mmc1:0001:1: data: 4294875968 BSS(1-0):
Data <= kernel
[ 208.672000] mwifiex_sdio mmc1:0001:1: data: WMM: Pkt Delay: 0 ms, 0
ms sent to FW
[ 208.672000] mwifiex_sdio mmc1:0001:1: data: mp_wr_bitmap=0xfffffe00
[ 208.672000] mwifiex_sdio mmc1:0001:1: data: port=9
mp_wr_bitmap=0xfffffe00 -> 0xfffffc00
[ 208.672000] mwifiex_sdio mmc1:0001:1: info:
mwifiex_host_to_card_mp_aggr: Last packet in Tx Queue.
[ 208.672000] mwifiex_sdio mmc1:0001:1: data: 4294875968 BSS(1-0):
Data <= kernel
[ 208.672000] mwifiex_sdio mmc1:0001:1: data:
mwifiex_host_to_card_mp_aggr: send current buffer 9
[ 208.672000] mwifiex_sdio mmc1:0001:1: data: tid=0
[ 208.672000] mwifiex_sdio mmc1:0001:1: cmd: mwifiex_send_addba: tid 0
[ 208.672000] mwifiex_sdio mmc1:0001:1: GET_CMD_NODE: cmd node not available
[ 208.672000] mwifiex_sdio mmc1:0001:1: PREP_CMD: no free cmd node
[ 208.672000] mwifiex_sdio mmc1:0001:1: data: 4294875968 BSS(1-0):
Data <= kernel
[ 208.672000] mwifiex_sdio mmc1:0001:1: data: WMM: Pkt Delay: 0 ms, 0
ms sent to FW
[ 208.672000] mwifiex_sdio mmc1:0001:1: data: 4294875968 BSS(1-0):
Data <= kernel
[ 208.672000] mwifiex_sdio mmc1:0001:1: data: mp_wr_bitmap=0xfffffc00
[ 208.672000] mwifiex_sdio mmc1:0001:1: data: port=10
mp_wr_bitmap=0xfffffc00 -> 0xfffff800
[ 208.672000] mwifiex_sdio mmc1:0001:1: info:
mwifiex_host_to_card_mp_aggr: Last packet in Tx Queue.
[ 208.672000] mwifiex_sdio mmc1:0001:1: data:
mwifiex_host_to_card_mp_aggr: send current buffer 10
[ 208.673000] mwifiex_sdio mmc1:0001:1: data: 4294875969 BSS(1-0):
Data <= kernel
[ 208.673000] mwifiex_sdio mmc1:0001:1: data: 4294875969 BSS(1-0):
Data <= kernel
[ 208.673000] mwifiex_sdio mmc1:0001:1: data: tid=0
[ 208.673000] mwifiex_sdio mmc1:0001:1: data: 4294875969 BSS(1-0):
Data <= kernel
[ 208.673000] mwifiex_sdio mmc1:0001:1: cmd: mwifiex_send_addba: tid 0
[ 208.673000] mwifiex_sdio mmc1:0001:1: GET_CMD_NODE: cmd node not available
[ 208.673000] mwifiex_sdio mmc1:0001:1: PREP_CMD: no free cmd node
[ 208.673000] mwifiex_sdio mmc1:0001:1: data: WMM: Pkt Delay: 0 ms, 0
ms sent to FW
[ 208.673000] mwifiex_sdio mmc1:0001:1: data: 4294875969 BSS(1-0):
Data <= kernel
[ 208.673000] mwifiex_sdio mmc1:0001:1: data: mp_wr_bitmap=0xfffff800
[ 208.673000] mwifiex_sdio mmc1:0001:1: data: port=11
mp_wr_bitmap=0xfffff800 -> 0xfffff000
[ 208.673000] mwifiex_sdio mmc1:0001:1: info:
mwifiex_host_to_card_mp_aggr: Last packet in Tx Queue.
[ 208.673000] mwifiex_sdio mmc1:0001:1: data:
mwifiex_host_to_card_mp_aggr: send current buffer 11
[ 208.673000] mwifiex_sdio mmc1:0001:1: data: 4294875969 BSS(1-0):
Data <= kernel
[ 208.673000] mwifiex_sdio mmc1:0001:1: data: tid=0
[ 208.673000] mwifiex_sdio mmc1:0001:1: cmd: mwifiex_send_addba: tid 0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On Wed, Sep 16, 2015 at 8:40 AM, Amitkumar Karwar <[email protected]> wrote:
>> From: Marty Faltesek [mailto:[email protected]]
>> Sent: Friday, September 04, 2015 3:21 AM
>> To: Belisko Marek
>> Cc: Amitkumar Karwar; [email protected]
>> Subject: Re: kernel log flooded with GET_CMD_NODE: cmd node not
>> available
>>
>> On Mon, Aug 31, 2015 at 7:54 AM, Belisko Marek <[email protected]>
>> wrote:
>> > [ 182.069146] mwifiex_sdio mmc0:0001:1: GET_CMD_NODE: cmd node not
>> > available [ 182.076350] mwifiex_sdio mmc0:0001:1: PREP_CMD: no free
>> > cmd node [ 182.085102] mwifiex_sdio mmc0:0001:1: GET_CMD_NODE: cmd
>> > node not available [ 182.092297] mwifiex_sdio mmc0:0001:1: PREP_CMD:
>> > no free cmd node [ 182.103276] mwifiex_sdio mmc0:0001:1:
>> > GET_CMD_NODE: cmd node not available [ 182.110478] mwifiex_sdio
>> > mmc0:0001:1: PREP_CMD: no free cmd node [ 182.121156] mwifiex_sdio
>> > mmc0:0001:1: GET_CMD_NODE: cmd node not available [ 182.128360]
>> > mwifiex_sdio mmc0:0001:1: PREP_CMD: no free cmd node [ 182.134750]
>> > mwifiex_sdio mmc0:0001:1: GET_CMD_NODE: cmd node not available [
>> > 182.141927] mwifiex_sdio mmc0:0001:1: PREP_CMD: no free cmd node
>>
>> We are also seeing these messages after recently switching to more
>> recent drivers.
>
> Marty confirmed that this problem got resolved after backporting below change to his codebase.
Same here. This patch should be marked for stable also. Many thanks.
>
> http://www.spinics.net/lists/linux-wireless/msg137134.html
>
> Regards,
> Amitkumar
BR,
marek
--
as simple and primitive as possible
-------------------------------------------------
Marek Belisko - OPEN-NANDRA
Freelance Developer
Ruska Nova Ves 219 | Presov, 08005 Slovak Republic
Tel: +421 915 052 184
skype: marekwhite
twitter: #opennandra
web: http://open-nandra.com
On Mon, Aug 31, 2015 at 7:54 AM, Belisko Marek <[email protected]> wrote:
> [ 182.069146] mwifiex_sdio mmc0:0001:1: GET_CMD_NODE: cmd node not available
> [ 182.076350] mwifiex_sdio mmc0:0001:1: PREP_CMD: no free cmd node
> [ 182.085102] mwifiex_sdio mmc0:0001:1: GET_CMD_NODE: cmd node not available
> [ 182.092297] mwifiex_sdio mmc0:0001:1: PREP_CMD: no free cmd node
> [ 182.103276] mwifiex_sdio mmc0:0001:1: GET_CMD_NODE: cmd node not available
> [ 182.110478] mwifiex_sdio mmc0:0001:1: PREP_CMD: no free cmd node
> [ 182.121156] mwifiex_sdio mmc0:0001:1: GET_CMD_NODE: cmd node not available
> [ 182.128360] mwifiex_sdio mmc0:0001:1: PREP_CMD: no free cmd node
> [ 182.134750] mwifiex_sdio mmc0:0001:1: GET_CMD_NODE: cmd node not available
> [ 182.141927] mwifiex_sdio mmc0:0001:1: PREP_CMD: no free cmd node
We are also seeing these messages after recently switching to more
recent drivers.