I have got 2 802.11n wireless routers using ralink rt3052f soc chip,mimo 2x2
burned with openwrt (kernel 2.6.37.6, compat-wireless-2011-05-27)
I configured them as mesh point respectively, then
#iw dev wlan0 station dump
but the tx rate and rx rate still not exceed 54mbps, that is mean the
ht mode(300mbps) is not been actived
can anyone tell me how to active the 802.11n ht mode in mesh?
it is the problem with mac80211 or rt2800pci driver?
or mesh using 802.11n is not implemented in the current kernel?
will it be implemented in the future?
thank!
nobody knows?
2011/6/15, b z <[email protected]>:
> I have got 2 802.11n wireless routers using ralink rt3052f soc chip,mimo
> 2x2
> burned with openwrt (kernel 2.6.37.6, compat-wireless-2011-05-27)
>
> I configured them as mesh point respectively, then
> #iw dev wlan0 station dump
>
> but the tx rate and rx rate still not exceed 54mbps, that is mean the
> ht mode(300mbps) is not been actived
>
> can anyone tell me how to active the 802.11n ht mode in mesh?
> it is the problem with mac80211 or rt2800pci driver?
> or mesh using 802.11n is not implemented in the current kernel?
>
> will it be implemented in the future?
> thank!
>
On Wed, Jun 15, 2011 at 6:13 PM, b z <[email protected]> wrote:
> I have got 2 802.11n wireless routers using ralink rt3052f soc chip,mimo 2x2
> burned with openwrt (kernel 2.6.37.6, compat-wireless-2011-05-27)
>
> I configured them as mesh point respectively, ?then
> #iw dev wlan0 station dump
>
> but the tx rate and rx rate still not exceed 54mbps, that is mean the
> ht mode(300mbps) is not been actived
>
> can anyone tell me how to active the 802.11n ht mode in mesh?
> it is the problem with mac80211 or rt2800pci driver?
> or mesh using 802.11n is not implemented in the current kernel?
yes HT mode is not yet supported in mesh (in mac80211). it should be
implemented in mac80211
>
> will it be implemented in the future?
some time back Luis sent this link
http://www.youtube.com/watch?v=sSUbCiEEP0k
> thank!
> --
> To unsubscribe from this list: send the line "unsubscribe linux-wireless" in
> the body of a message to [email protected]
> More majordomo info at ?http://vger.kernel.org/majordomo-info.html
>
--
shafi