2020-07-08 14:10:36

by Yannick FERTRE

Subject: [PATCH v2] drm/bridge/synopsys: dsi: allow LP commands in video mode

From: Antonio Borneo <[email protected]>

Current code only sends LP commands in command mode.

Allows sending LP commands also in video mode by setting the
proper flag in DSI_VID_MODE_CFG.

Signed-off-by: Antonio Borneo <[email protected]>
---
drivers/gpu/drm/bridge/synopsys/dw-mipi-dsi.c | 8 ++++++++
1 file changed, 8 insertions(+)

diff --git a/drivers/gpu/drm/bridge/synopsys/dw-mipi-dsi.c b/drivers/gpu/drm/bridge/synopsys/dw-mipi-dsi.c
index 1a24ea648ef8..e9a0f42ff99f 100644
--- a/drivers/gpu/drm/bridge/synopsys/dw-mipi-dsi.c
+++ b/drivers/gpu/drm/bridge/synopsys/dw-mipi-dsi.c
@@ -89,6 +89,7 @@
#define VID_MODE_TYPE_NON_BURST_SYNC_EVENTS 0x1
#define VID_MODE_TYPE_BURST 0x2
#define VID_MODE_TYPE_MASK 0x3
+#define ENABLE_LOW_POWER_CMD BIT(15)
#define VID_MODE_VPG_ENABLE BIT(16)
#define VID_MODE_VPG_HORIZONTAL BIT(24)

@@ -376,6 +377,13 @@ static void dw_mipi_message_config(struct dw_mipi_dsi *dsi,

dsi_write(dsi, DSI_LPCLK_CTRL, lpm ? 0 : PHY_TXREQUESTCLKHS);
dsi_write(dsi, DSI_CMD_MODE_CFG, val);
+
+ val = dsi_read(dsi, DSI_VID_MODE_CFG);
+ if (lpm)
+ val |= ENABLE_LOW_POWER_CMD;
+ else
+ val &= ~ENABLE_LOW_POWER_CMD;
+ dsi_write(dsi, DSI_VID_MODE_CFG, val);
}

static int dw_mipi_dsi_gen_pkt_hdr_write(struct dw_mipi_dsi *dsi, u32 hdr_val)
--
2.17.1

2020-07-10 08:45:26

by Philippe Cornu

Subject: Re: [PATCH v2] drm/bridge/synopsys: dsi: allow LP commands in video mode

On 7/8/20 4:08 PM, Yannick Fertre wrote:
> From: Antonio Borneo <[email protected]>
>
> Current code only sends LP commands in command mode.
>
> Allows sending LP commands also in video mode by setting the
> proper flag in DSI_VID_MODE_CFG.
>
> Signed-off-by: Antonio Borneo <[email protected]>
> ---
> drivers/gpu/drm/bridge/synopsys/dw-mipi-dsi.c | 8 ++++++++
> 1 file changed, 8 insertions(+)
>
> diff --git a/drivers/gpu/drm/bridge/synopsys/dw-mipi-dsi.c b/drivers/gpu/drm/bridge/synopsys/dw-mipi-dsi.c
> index 1a24ea648ef8..e9a0f42ff99f 100644
> --- a/drivers/gpu/drm/bridge/synopsys/dw-mipi-dsi.c
> +++ b/drivers/gpu/drm/bridge/synopsys/dw-mipi-dsi.c
> @@ -89,6 +89,7 @@
> #define VID_MODE_TYPE_NON_BURST_SYNC_EVENTS 0x1
> #define VID_MODE_TYPE_BURST 0x2
> #define VID_MODE_TYPE_MASK 0x3
> +#define ENABLE_LOW_POWER_CMD BIT(15)
> #define VID_MODE_VPG_ENABLE BIT(16)
> #define VID_MODE_VPG_HORIZONTAL BIT(24)
>
> @@ -376,6 +377,13 @@ static void dw_mipi_message_config(struct dw_mipi_dsi *dsi,
>
> dsi_write(dsi, DSI_LPCLK_CTRL, lpm ? 0 : PHY_TXREQUESTCLKHS);
> dsi_write(dsi, DSI_CMD_MODE_CFG, val);
> +
> + val = dsi_read(dsi, DSI_VID_MODE_CFG);
> + if (lpm)
> + val |= ENABLE_LOW_POWER_CMD;
> + else
> + val &= ~ENABLE_LOW_POWER_CMD;
> + dsi_write(dsi, DSI_VID_MODE_CFG, val);
> }
>
> static int dw_mipi_dsi_gen_pkt_hdr_write(struct dw_mipi_dsi *dsi, u32 hdr_val)
>

(+ Antonio)

Hi Yannick & Antonio,

Reviewed-by: Philippe Cornu <[email protected]>
Tested-by: Philippe Cornu <[email protected]>

(Tested with the 3 patches named
drm/bridge/synopsys: dsi: allow LP commands in video mode
drm/bridge/synopsys: dsi: allow sending longer LP commands
drm/bridge/synopsys: dsi: add support for non-continuous HS clock
on various dsi bridges + stm32mp157 disco board)

Many thanks
Philippe :-)

2020-09-07 08:04:25

by Neil Armstrong

Subject: Re: [PATCH v2] drm/bridge/synopsys: dsi: allow LP commands in video mode

On 08/07/2020 16:08, Yannick Fertre wrote:
> From: Antonio Borneo <[email protected]>
>
> Current code only sends LP commands in command mode.
>
> Allows sending LP commands also in video mode by setting the
> proper flag in DSI_VID_MODE_CFG.
>
> Signed-off-by: Antonio Borneo <[email protected]>
> ---
> drivers/gpu/drm/bridge/synopsys/dw-mipi-dsi.c | 8 ++++++++
> 1 file changed, 8 insertions(+)
>
> diff --git a/drivers/gpu/drm/bridge/synopsys/dw-mipi-dsi.c b/drivers/gpu/drm/bridge/synopsys/dw-mipi-dsi.c
> index 1a24ea648ef8..e9a0f42ff99f 100644
> --- a/drivers/gpu/drm/bridge/synopsys/dw-mipi-dsi.c
> +++ b/drivers/gpu/drm/bridge/synopsys/dw-mipi-dsi.c
> @@ -89,6 +89,7 @@
> #define VID_MODE_TYPE_NON_BURST_SYNC_EVENTS 0x1
> #define VID_MODE_TYPE_BURST 0x2
> #define VID_MODE_TYPE_MASK 0x3
> +#define ENABLE_LOW_POWER_CMD BIT(15)
> #define VID_MODE_VPG_ENABLE BIT(16)
> #define VID_MODE_VPG_HORIZONTAL BIT(24)
>
> @@ -376,6 +377,13 @@ static void dw_mipi_message_config(struct dw_mipi_dsi *dsi,
>
> dsi_write(dsi, DSI_LPCLK_CTRL, lpm ? 0 : PHY_TXREQUESTCLKHS);
> dsi_write(dsi, DSI_CMD_MODE_CFG, val);
> +
> + val = dsi_read(dsi, DSI_VID_MODE_CFG);
> + if (lpm)
> + val |= ENABLE_LOW_POWER_CMD;
> + else
> + val &= ~ENABLE_LOW_POWER_CMD;
> + dsi_write(dsi, DSI_VID_MODE_CFG, val);
> }
>
> static int dw_mipi_dsi_gen_pkt_hdr_write(struct dw_mipi_dsi *dsi, u32 hdr_val)
>

Tested on Amlogic AXG (v1.21a)

Acked-by: Neil Armstrong <[email protected]>

Applying to drm-misc-next

Thanks !
Neil