2006-05-12 15:08:24

by Paul Fulghum

Subject: [PATCH] remove dead entry in net wan Kconfig

Remove dead entry from net wan Kconfig.
This entry is left over from 2.4 where synclink
used syncppp driver directly. synclink drivers
now use generic HDLC

Signed-off-by: Paul Fulghum <[email protected]>

--- linux-2.6.16/drivers/net/wan/Kconfig 2006-03-19 23:53:29.000000000 -0600
+++ b/drivers/net/wan/Kconfig 2006-05-12 09:17:03.000000000 -0500
@@ -134,18 +134,6 @@
The driver will be compiled as a module: the
module will be called sealevel.

-config SYNCLINK_SYNCPPP
- tristate "SyncLink HDLC/SYNCPPP support"
- depends on WAN
- help
- Enables HDLC/SYNCPPP support for the SyncLink WAN driver.
-
- Normally the SyncLink WAN driver works with the main PPP driver
- <file:drivers/net/ppp_generic.c> and pppd program.
- HDLC/SYNCPPP support allows use of the Cisco HDLC/PPP driver
- <file:drivers/net/wan/syncppp.c>. The SyncLink WAN driver (in
- character devices) must also be enabled.
-
# Generic HDLC
config HDLC
tristate "Generic HDLC layer"

2006-05-16 16:00:47

by Adrian Bunk

Subject: Re: [PATCH] remove dead entry in net wan Kconfig

On Fri, May 12, 2006 at 10:08:14AM -0500, Paul Fulghum wrote:

> Remove dead entry from net wan Kconfig.
> This entry is left over from 2.4 where synclink
> used syncppp driver directly. synclink drivers
> now use generic HDLC


What about also removing the entry for this option in the Makefile?


> Signed-off-by: Paul Fulghum <[email protected]>
>
> --- linux-2.6.16/drivers/net/wan/Kconfig 2006-03-19 23:53:29.000000000 -0600
> +++ b/drivers/net/wan/Kconfig 2006-05-12 09:17:03.000000000 -0500
> @@ -134,18 +134,6 @@
> The driver will be compiled as a module: the
> module will be called sealevel.
>
> -config SYNCLINK_SYNCPPP
> - tristate "SyncLink HDLC/SYNCPPP support"
> - depends on WAN
> - help
> - Enables HDLC/SYNCPPP support for the SyncLink WAN driver.
> -
> - Normally the SyncLink WAN driver works with the main PPP driver
> - <file:drivers/net/ppp_generic.c> and pppd program.
> - HDLC/SYNCPPP support allows use of the Cisco HDLC/PPP driver
> - <file:drivers/net/wan/syncppp.c>. The SyncLink WAN driver (in
> - character devices) must also be enabled.
> -
> # Generic HDLC
> config HDLC
> tristate "Generic HDLC layer"

cu
Adrian

--

"Is there not promise of rain?" Ling Tan asked suddenly out
of the darkness. There had been need of rain for many days.
"Only a promise," Lao Er said.
Pearl S. Buck - Dragon Seed

2006-05-16 16:41:19

by Paul Fulghum

Subject: Re: [PATCH] remove dead entry in net wan Kconfig

Adrian Bunk wrote:
> What about also removing the entry for this option in the Makefile?

Good point, I'll do that.

--
Paul Fulghum
Microgate Systems, Ltd.

2006-05-16 18:19:24

by Paul Fulghum

Subject: [PATCH] remove dead entry in net wan Makefile

Remove dead entry in net wan Makefile.
Entry is left over from 2.4 when synclink used syncppp.
synclink drivers now use generic HDLC

Signed-off-by: Paul Fulghum <[email protected]>

--- linux-2.6.16/drivers/net/wan/Makefile 2006-03-19 23:53:29.000000000 -0600
+++ b/drivers/net/wan/Makefile 2006-05-16 13:13:36.000000000 -0500
@@ -36,7 +36,6 @@
obj-$(CONFIG_FARSYNC) += syncppp.o farsync.o
obj-$(CONFIG_DSCC4) += dscc4.o
obj-$(CONFIG_LANMEDIA) += syncppp.o
-obj-$(CONFIG_SYNCLINK_SYNCPPP) += syncppp.o
obj-$(CONFIG_X25_ASY) += x25_asy.o

obj-$(CONFIG_LANMEDIA) += lmc/