Remove dead entry from net wan Kconfig.
This entry is left over from 2.4 where synclink
used syncppp driver directly. synclink drivers
now use generic HDLC
Signed-off-by: Paul Fulghum <[email protected]>
--- linux-2.6.16/drivers/net/wan/Kconfig 2006-03-19 23:53:29.000000000 -0600
+++ b/drivers/net/wan/Kconfig 2006-05-12 09:17:03.000000000 -0500
@@ -134,18 +134,6 @@
The driver will be compiled as a module: the
module will be called sealevel.
-config SYNCLINK_SYNCPPP
- tristate "SyncLink HDLC/SYNCPPP support"
- depends on WAN
- help
- Enables HDLC/SYNCPPP support for the SyncLink WAN driver.
-
- Normally the SyncLink WAN driver works with the main PPP driver
- <file:drivers/net/ppp_generic.c> and pppd program.
- HDLC/SYNCPPP support allows use of the Cisco HDLC/PPP driver
- <file:drivers/net/wan/syncppp.c>. The SyncLink WAN driver (in
- character devices) must also be enabled.
-
# Generic HDLC
config HDLC
tristate "Generic HDLC layer"
On Fri, May 12, 2006 at 10:08:14AM -0500, Paul Fulghum wrote:
> Remove dead entry from net wan Kconfig.
> This entry is left over from 2.4 where synclink
> used syncppp driver directly. synclink drivers
> now use generic HDLC
What about also removing the entry for this option in the Makefile?
> Signed-off-by: Paul Fulghum <[email protected]>
>
> --- linux-2.6.16/drivers/net/wan/Kconfig 2006-03-19 23:53:29.000000000 -0600
> +++ b/drivers/net/wan/Kconfig 2006-05-12 09:17:03.000000000 -0500
> @@ -134,18 +134,6 @@
> The driver will be compiled as a module: the
> module will be called sealevel.
>
> -config SYNCLINK_SYNCPPP
> - tristate "SyncLink HDLC/SYNCPPP support"
> - depends on WAN
> - help
> - Enables HDLC/SYNCPPP support for the SyncLink WAN driver.
> -
> - Normally the SyncLink WAN driver works with the main PPP driver
> - <file:drivers/net/ppp_generic.c> and pppd program.
> - HDLC/SYNCPPP support allows use of the Cisco HDLC/PPP driver
> - <file:drivers/net/wan/syncppp.c>. The SyncLink WAN driver (in
> - character devices) must also be enabled.
> -
> # Generic HDLC
> config HDLC
> tristate "Generic HDLC layer"
cu
Adrian
--
"Is there not promise of rain?" Ling Tan asked suddenly out
of the darkness. There had been need of rain for many days.
"Only a promise," Lao Er said.
Pearl S. Buck - Dragon Seed
Adrian Bunk wrote:
> What about also removing the entry for this option in the Makefile?
Good point, I'll do that.
--
Paul Fulghum
Microgate Systems, Ltd.
Remove dead entry in net wan Makefile.
Entry is left over from 2.4 when synclink used syncppp.
synclink drivers now use generic HDLC
Signed-off-by: Paul Fulghum <[email protected]>
--- linux-2.6.16/drivers/net/wan/Makefile 2006-03-19 23:53:29.000000000 -0600
+++ b/drivers/net/wan/Makefile 2006-05-16 13:13:36.000000000 -0500
@@ -36,7 +36,6 @@
obj-$(CONFIG_FARSYNC) += syncppp.o farsync.o
obj-$(CONFIG_DSCC4) += dscc4.o
obj-$(CONFIG_LANMEDIA) += syncppp.o
-obj-$(CONFIG_SYNCLINK_SYNCPPP) += syncppp.o
obj-$(CONFIG_X25_ASY) += x25_asy.o
obj-$(CONFIG_LANMEDIA) += lmc/