I noted that the aacraid module under 2.6.18 is crashing pretty hard
under 2.6.18
Anyone working on that? I'll send more detail in the AM with serial
console captures and dump information.
Sean
On Wed, 27 Sep 2006 19:47:27 -0700
Sean Bruno <[email protected]> wrote:
> I noted that the aacraid module under 2.6.18 is crashing pretty hard
> under 2.6.18
>
> Anyone working on that?
Nope.
> I'll send more detail in the AM with serial
> console captures and dump information.
Thanks.
I look forward to seeing them.
Please report them to the scsi list as well.
Sincerely -- Mark Salyzyn
> -----Original Message-----
> From: [email protected]
> [mailto:[email protected]] On Behalf Of Sean Bruno
> Sent: Wednesday, September 27, 2006 10:47 PM
> To: [email protected]
> Subject: [aacraid] Adaptec 2820SA Crash
>
>
> I noted that the aacraid module under 2.6.18 is crashing pretty hard
> under 2.6.18
>
> Anyone working on that? I'll send more detail in the AM with serial
> console captures and dump information.
>
> Sean
>
> -
> To unsubscribe from this list: send the line "unsubscribe
> linux-kernel" in
> the body of a message to [email protected]
> More majordomo info at http://vger.kernel.org/majordomo-info.html
> Please read the FAQ at http://www.tux.org/lkml/
>
Hmmmmmm....I don't seem to be able to post with the attachments. Here
is the kernel panic/dump and some other information:
The system in question is an ASUS M2N32WS motherboard running an
Dual-Core Athlon64.
The 2820SA was tested with firmware revisions 9194 and 8832.
The running o/s is Fedora Core 6 Test 3 with their latest renditions of
2.6.18. I also compiled and tested vanilla 2.6.18 with the kernel
configuration from Fedora's kernels.
The driver version of aacraid reports as 1.1-5[2409]-mh2.
udevd[541]: add_to_rules: invalid rule
'/etc/udev/rules.d/50-udev.rules:153'
Unable to handle kernel paging request at ffffc20010084044 RIP:
[<ffffffff88169501>] :aacraid:aac_rkt_intr+0x1a/0x122
PGD 3fc1a067 PUD 3fc1b067 PMD 3fdf7067 PTE 0
Oops: 0000 [1] SMP
last sysfs file: /class/net/lo/type
CPU 0
Modules linked in: i2c_nforce2 ohci1394 i2c_core ieee1394 floppy aacraid
pcspkrdPid: 743, comm: modprobe Not tainted 2.6.18-1.2693.fc6 #1
RIP: 0010:[<ffffffff88169501>]
[<ffffffff88169501>] :aacraid:aac_rkt_intr+0x1a2RSP:
0018:ffffffff80716ef8 EFLAGS: 00010002
RAX: 0000000000000000 RBX: ffff81003c61b138 RCX: ffffc20010084000
RDX: ffff81003d4af9e8 RSI: ffff81003bbe26d8 RDI: 00000000000000b1
RBP: ffffffff80716f08 R08: ffffffff80716f28 R09: 0000000000000001
R10: ffffffff802c238e R11: ffffffff806be440 R12: ffff81003bbe26d8
R13: 0000000000000000 R14: 00000000000000b1 R15: ffff81003d4af9e8
FS: 00002aaaaaab6240(0000) GS:ffffffff8069b000(0000)
knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 000000008005003b
CR2: ffffc20010084044 CR3: 000000003ce1f000 CR4: 00000000000006e0
Process modprobe (pid: 743, threadinfo ffff81003d4ae000, task
ffff81003ee510c0)
Stack: ffff81003c61b138 0000000000000000 ffffffff80716f48
ffffffff80211475
ffffffff806be440 ffffffff806be400 000000000000b100 00000000000000b1
ffffffff806be440 ffff81003c61b138 ffffffff80716f88 ffffffff802c23f1
Call Trace:
[<ffffffff80211475>] handle_IRQ_event+0x2c/0x64
[<ffffffff802c23f1>] __do_IRQ+0xaf/0x114
[<ffffffff802700a1>] do_IRQ+0xf8/0x107
[<ffffffff80260d46>] ret_from_intr+0x0/0xf
DWARF2 unwinder stuck at ret_from_intr+0x0/0xf
Leftover inexact backtrace:
<IRQ> <EOI> [<ffffffff80278c61>] do_flush_tlb_all+0x0/0x87
[<ffffffff80295c57>] on_each_cpu+0x2d/0x36
[<ffffffff80278f4b>] flush_tlb_all+0x1c/0x1e
[<ffffffff8025457b>] unmap_vm_area+0x1d4/0x276
[<ffffffff80201c20>] init_level4_pgt+0xc20/0x1000
[<ffffffff802d1973>] __remove_vm_area+0x2c/0x44
[<ffffffff802d19ab>] remove_vm_area+0x20/0x36
[<ffffffff802840a1>] iounmap+0x8e/0xce
[<ffffffff88166684>] :aacraid:aac_init_adapter+0xcc/0x674
[<ffffffff88169857>] :aacraid:aac_rkt_init+0x15d/0x250
[<ffffffff88162a47>] :aacraid:aac_probe_one+0x209/0x4c6
[<ffffffff8035ce4f>] pci_device_probe+0x106/0x186
[<ffffffff8028e73f>] default_wake_function+0x0/0xf
[<ffffffff803bf972>] driver_probe_device+0x5c/0xb1
[<ffffffff803bfadc>] __driver_attach+0x89/0xdb
[<ffffffff803bfa53>] __driver_attach+0x0/0xdb
[<ffffffff803bf324>] bus_for_each_dev+0x49/0x7a
[<ffffffff803bf89c>] driver_attach+0x1c/0x1e
[<ffffffff803bef3c>] bus_add_driver+0x89/0x138
[<ffffffff803bfd87>] driver_register+0x8f/0x93
[<ffffffff8035d051>] __pci_register_driver+0x63/0x85
[<ffffffff8817c033>] :aacraid:aac_init+0x33/0x6e
[<ffffffff802afc95>] sys_init_module+0x1708/0x18cc
[<ffffffff802dbffb>] __kmalloc+0x0/0x134
[<ffffffff8026080e>] system_call+0x7e/0x83
Code: 8b 59 44 83 fb ff 75 0c 8b 59 44 83 fb ff 0f 84 ed 00 00 00
RIP [<ffffffff88169501>] :aacraid:aac_rkt_intr+0x1a/0x122
RSP <ffffffff80716ef8>
CR2: ffffc20010084044
<3>BUG: sleeping function called from invalid context at
kernel/rwsem.c:20
in_atomic():1, irqs_disabled():1
Call Trace:
[<ffffffff8026ebcd>] show_trace+0xae/0x336
[<ffffffff8026ee6a>] dump_stack+0x15/0x17
[<ffffffff8020badb>] __might_sleep+0xb2/0xb4
[<ffffffff802a6226>] down_read+0x1d/0x4a
[<ffffffff8029e091>] blocking_notifier_call_chain+0x1b/0x41
[<ffffffff80294329>] profile_task_exit+0x15/0x17
[<ffffffff80215cd7>] do_exit+0x24/0x911
[<ffffffff8026a2ff>] do_page_fault+0x7ba/0x842
[<ffffffff80261591>] error_exit+0x0/0x96
DWARF2 unwinder stuck at error_exit+0x0/0x96
Leftover inexact backtrace:
<IRQ> [<ffffffff802c238e>] __do_IRQ+0x4c/0x114
[<ffffffff88169501>] :aacraid:aac_rkt_intr+0x1a/0x122
[<ffffffff80211475>] handle_IRQ_event+0x2c/0x64
[<ffffffff802c23f1>] __do_IRQ+0xaf/0x114
[<ffffffff80278c61>] do_flush_tlb_all+0x0/0x87
[<ffffffff802700a1>] do_IRQ+0xf8/0x107
[<ffffffff80260d46>] ret_from_intr+0x0/0xf
<EOI> [<ffffffff80278c61>] do_flush_tlb_all+0x0/0x87
[<ffffffff80295c57>] on_each_cpu+0x2d/0x36
[<ffffffff80278f4b>] flush_tlb_all+0x1c/0x1e
[<ffffffff8025457b>] unmap_vm_area+0x1d4/0x276
[<ffffffff80201c20>] init_level4_pgt+0xc20/0x1000
[<ffffffff802d1973>] __remove_vm_area+0x2c/0x44
[<ffffffff802d19ab>] remove_vm_area+0x20/0x36
[<ffffffff802840a1>] iounmap+0x8e/0xce
[<ffffffff88166684>] :aacraid:aac_init_adapter+0xcc/0x674
[<ffffffff88169857>] :aacraid:aac_rkt_init+0x15d/0x250
[<ffffffff88162a47>] :aacraid:aac_probe_one+0x209/0x4c6
[<ffffffff8035ce4f>] pci_device_probe+0x106/0x186
[<ffffffff8028e73f>] default_wake_function+0x0/0xf
[<ffffffff803bf972>] driver_probe_device+0x5c/0xb1
[<ffffffff803bfadc>] __driver_attach+0x89/0xdb
[<ffffffff803bfa53>] __driver_attach+0x0/0xdb
[<ffffffff803bf324>] bus_for_each_dev+0x49/0x7a
[<ffffffff803bf89c>] driver_attach+0x1c/0x1e
[<ffffffff803bef3c>] bus_add_driver+0x89/0x138
[<ffffffff803bfd87>] driver_register+0x8f/0x93
[<ffffffff8035d051>] __pci_register_driver+0x63/0x85
[<ffffffff8817c033>] :aacraid:aac_init+0x33/0x6e
[<ffffffff802afc95>] sys_init_module+0x1708/0x18cc
[<ffffffff802dbffb>] __kmalloc+0x0/0x134
[<ffffffff8026080e>] system_call+0x7e/0x83
BUG: warning at kernel/lockdep.c:1816/trace_hardirqs_on() (Not tainted)
Call Trace:
[<ffffffff8026ebcd>] show_trace+0xae/0x336
[<ffffffff8026ee6a>] dump_stack+0x15/0x17
[<ffffffff802a83b3>] trace_hardirqs_on+0xbc/0x13d
[<ffffffff80267e32>] _spin_unlock_irq+0x2b/0x31
[<ffffffff80267491>] __down_read+0x3d/0xa1
[<ffffffff802a624f>] down_read+0x46/0x4a
[<ffffffff8029e091>] blocking_notifier_call_chain+0x1b/0x41
[<ffffffff80294329>] profile_task_exit+0x15/0x17
[<ffffffff80215cd7>] do_exit+0x24/0x911
[<ffffffff8026a2ff>] do_page_fault+0x7ba/0x842
[<ffffffff80261591>] error_exit+0x0/0x96
DWARF2 unwinder stuck at error_exit+0x0/0x96
Leftover inexact backtrace:
<IRQ> [<ffffffff802c238e>] __do_IRQ+0x4c/0x114
[<ffffffff88169501>] :aacraid:aac_rkt_intr+0x1a/0x122
[<ffffffff80211475>] handle_IRQ_event+0x2c/0x64
[<ffffffff802c23f1>] __do_IRQ+0xaf/0x114
[<ffffffff80278c61>] do_flush_tlb_all+0x0/0x87
[<ffffffff802700a1>] do_IRQ+0xf8/0x107
[<ffffffff80260d46>] ret_from_intr+0x0/0xf
<EOI> [<ffffffff80278c61>] do_flush_tlb_all+0x0/0x87
[<ffffffff80295c57>] on_each_cpu+0x2d/0x36
[<ffffffff80278f4b>] flush_tlb_all+0x1c/0x1e
[<ffffffff8025457b>] unmap_vm_area+0x1d4/0x276
[<ffffffff80201c20>] init_level4_pgt+0xc20/0x1000
[<ffffffff802d1973>] __remove_vm_area+0x2c/0x44
[<ffffffff802d19ab>] remove_vm_area+0x20/0x36
[<ffffffff802840a1>] iounmap+0x8e/0xce
[<ffffffff88166684>] :aacraid:aac_init_adapter+0xcc/0x674
[<ffffffff88169857>] :aacraid:aac_rkt_init+0x15d/0x250
[<ffffffff88162a47>] :aacraid:aac_probe_one+0x209/0x4c6
[<ffffffff8035ce4f>] pci_device_probe+0x106/0x186
[<ffffffff8028e73f>] default_wake_function+0x0/0xf
[<ffffffff803bf972>] driver_probe_device+0x5c/0xb1
[<ffffffff803bfadc>] __driver_attach+0x89/0xdb
[<ffffffff803bfa53>] __driver_attach+0x0/0xdb
[<ffffffff803bf324>] bus_for_each_dev+0x49/0x7a
[<ffffffff803bf89c>] driver_attach+0x1c/0x1e
[<ffffffff803bef3c>] bus_add_driver+0x89/0x138
[<ffffffff803bfd87>] driver_register+0x8f/0x93
[<ffffffff8035d051>] __pci_register_driver+0x63/0x85
[<ffffffff8817c033>] :aacraid:aac_init+0x33/0x6e
[<ffffffff802afc95>] sys_init_module+0x1708/0x18cc
[<ffffffff802dbffb>] __kmalloc+0x0/0x134
[<ffffffff8026080e>] system_call+0x7e/0x83
Kernel panic - not syncing: Aiee, killing interrupt handler!
BUG: warning at kernel/panic.c:137/panic() (Not tainted)
Call Trace:
[<ffffffff8026ebcd>] show_trace+0xae/0x336
[<ffffffff8026ee6a>] dump_stack+0x15/0x17
[<ffffffff80292f79>] panic+0x202/0x213
[<ffffffff80215d48>] do_exit+0x95/0x911
[<ffffffff8026a2ff>] do_page_fault+0x7ba/0x842
[<ffffffff80261591>] error_exit+0x0/0x96
DWARF2 unwinder stuck at error_exit+0x0/0x96
Leftover inexact backtrace:
<IRQ> [<ffffffff802c238e>] __do_IRQ+0x4c/0x114
[<ffffffff88169501>] :aacraid:aac_rkt_intr+0x1a/0x122
[<ffffffff80211475>] handle_IRQ_event+0x2c/0x64
[<ffffffff802c23f1>] __do_IRQ+0xaf/0x114
[<ffffffff80278c61>] do_flush_tlb_all+0x0/0x87
[<ffffffff802700a1>] do_IRQ+0xf8/0x107
[<ffffffff80260d46>] ret_from_intr+0x0/0xf
<EOI> [<ffffffff80278c61>] do_flush_tlb_all+0x0/0x87
[<ffffffff80295c57>] on_each_cpu+0x2d/0x36
[<ffffffff80278f4b>] flush_tlb_all+0x1c/0x1e
[<ffffffff8025457b>] unmap_vm_area+0x1d4/0x276
[<ffffffff80201c20>] init_level4_pgt+0xc20/0x1000
[<ffffffff802d1973>] __remove_vm_area+0x2c/0x44
[<ffffffff802d19ab>] remove_vm_area+0x20/0x36
[<ffffffff802840a1>] iounmap+0x8e/0xce
[<ffffffff88166684>] :aacraid:aac_init_adapter+0xcc/0x674
[<ffffffff88169857>] :aacraid:aac_rkt_init+0x15d/0x250
[<ffffffff88162a47>] :aacraid:aac_probe_one+0x209/0x4c6
[<ffffffff8035ce4f>] pci_device_probe+0x106/0x186
[<ffffffff8028e73f>] default_wake_function+0x0/0xf
[<ffffffff803bf972>] driver_probe_device+0x5c/0xb1
[<ffffffff803bfadc>] __driver_attach+0x89/0xdb
[<ffffffff803bfa53>] __driver_attach+0x0/0xdb
[<ffffffff803bf324>] bus_for_each_dev+0x49/0x7a
[<ffffffff803bf89c>] driver_attach+0x1c/0x1e
[<ffffffff803bef3c>] bus_add_driver+0x89/0x138
[<ffffffff803bfd87>] driver_register+0x8f/0x93
[<ffffffff8035d051>] __pci_register_driver+0x63/0x85
[<ffffffff8817c033>] :aacraid:aac_init+0x33/0x6e
[<ffffffff802afc95>] sys_init_module+0x1708/0x18cc
[<ffffffff802dbffb>] __kmalloc+0x0/0x134
[<ffffffff8026080e>] system_call+0x7e/0x83
On Thu, 2006-09-28 at 09:06 -0400, Salyzyn, Mark wrote:
> I look forward to seeing them.
>
> Please report them to the scsi list as well.
>
> Sincerely -- Mark Salyzyn
>
> > -----Original Message-----
> > From: [email protected]
> > [mailto:[email protected]] On Behalf Of Sean Bruno
> > Sent: Wednesday, September 27, 2006 10:47 PM
> > To: [email protected]
> > Subject: [aacraid] Adaptec 2820SA Crash
> >
> >
> > I noted that the aacraid module under 2.6.18 is crashing pretty hard
> > under 2.6.18
> >
> > Anyone working on that? I'll send more detail in the AM with serial
> > console captures and dump information.
> >
> > Sean
> >
> > -
> > To unsubscribe from this list: send the line "unsubscribe
> > linux-kernel" in
> > the body of a message to [email protected]
> > More majordomo info at http://vger.kernel.org/majordomo-info.html
> > Please read the FAQ at http://www.tux.org/lkml/
> >