2006-10-02 01:12:25

by Wink Saville

[permalink] [raw]
Subject: PCI: BIOS Bug: MCFG area at f0000000 is not E820-reserved with 2.6.18 kernel

#
# Automatically generated make config: don't edit
# Linux kernel version: 2.6.18
# Sun Oct 1 16:30:19 2006
#
CONFIG_X86_64=y
CONFIG_64BIT=y
CONFIG_X86=y
CONFIG_ZONE_DMA32=y
CONFIG_LOCKDEP_SUPPORT=y
CONFIG_STACKTRACE_SUPPORT=y
CONFIG_SEMAPHORE_SLEEPERS=y
CONFIG_MMU=y
CONFIG_RWSEM_GENERIC_SPINLOCK=y
CONFIG_GENERIC_HWEIGHT=y
CONFIG_GENERIC_CALIBRATE_DELAY=y
CONFIG_X86_CMPXCHG=y
CONFIG_EARLY_PRINTK=y
CONFIG_GENERIC_ISA_DMA=y
CONFIG_GENERIC_IOMAP=y
CONFIG_ARCH_MAY_HAVE_PC_FDC=y
CONFIG_ARCH_POPULATES_NODE_MAP=y
CONFIG_DMI=y
CONFIG_AUDIT_ARCH=y
CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"

#
# Code maturity level options
#
CONFIG_EXPERIMENTAL=y
CONFIG_LOCK_KERNEL=y
CONFIG_INIT_ENV_ARG_LIMIT=32

#
# General setup
#
CONFIG_LOCALVERSION="-w3"
# CONFIG_LOCALVERSION_AUTO is not set
CONFIG_SWAP=y
CONFIG_SYSVIPC=y
CONFIG_POSIX_MQUEUE=y
CONFIG_BSD_PROCESS_ACCT=y
CONFIG_BSD_PROCESS_ACCT_V3=y
# CONFIG_TASKSTATS is not set
# CONFIG_AUDIT is not set
CONFIG_IKCONFIG=y
CONFIG_IKCONFIG_PROC=y
# CONFIG_CPUSETS is not set
CONFIG_RELAY=y
CONFIG_INITRAMFS_SOURCE=""
# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
CONFIG_SYSCTL=y
# CONFIG_EMBEDDED is not set
CONFIG_UID16=y
# CONFIG_SYSCTL_SYSCALL is not set
CONFIG_KALLSYMS=y
# CONFIG_KALLSYMS_ALL is not set
# CONFIG_KALLSYMS_EXTRA_PASS is not set
CONFIG_HOTPLUG=y
CONFIG_PRINTK=y
CONFIG_BUG=y
CONFIG_ELF_CORE=y
CONFIG_BASE_FULL=y
CONFIG_FUTEX=y
CONFIG_EPOLL=y
CONFIG_SHMEM=y
CONFIG_SLAB=y
CONFIG_VM_EVENT_COUNTERS=y
CONFIG_RT_MUTEXES=y
# CONFIG_TINY_SHMEM is not set
CONFIG_BASE_SMALL=0
# CONFIG_SLOB is not set

#
# Loadable module support
#
CONFIG_MODULES=y
CONFIG_MODULE_UNLOAD=y
CONFIG_MODULE_FORCE_UNLOAD=y
CONFIG_MODVERSIONS=y
CONFIG_MODULE_SRCVERSION_ALL=y
CONFIG_KMOD=y
CONFIG_STOP_MACHINE=y

#
# Block layer
#
CONFIG_BLOCK=y
CONFIG_LBD=y
CONFIG_BLK_DEV_IO_TRACE=y
# CONFIG_LSF is not set

#
# IO Schedulers
#
CONFIG_IOSCHED_NOOP=y
CONFIG_IOSCHED_AS=y
CONFIG_IOSCHED_DEADLINE=y
CONFIG_IOSCHED_CFQ=y
CONFIG_DEFAULT_AS=y
# CONFIG_DEFAULT_DEADLINE is not set
# CONFIG_DEFAULT_CFQ is not set
# CONFIG_DEFAULT_NOOP is not set
CONFIG_DEFAULT_IOSCHED="anticipatory"

#
# Processor type and features
#
CONFIG_X86_PC=y
# CONFIG_X86_VSMP is not set
# CONFIG_MK8 is not set
# CONFIG_MPSC is not set
CONFIG_GENERIC_CPU=y
CONFIG_X86_L1_CACHE_BYTES=128
CONFIG_X86_L1_CACHE_SHIFT=7
CONFIG_X86_INTERNODE_CACHE_BYTES=128
CONFIG_X86_TSC=y
CONFIG_X86_GOOD_APIC=y
CONFIG_MICROCODE=y
CONFIG_MICROCODE_OLD_INTERFACE=y
CONFIG_X86_MSR=y
CONFIG_X86_CPUID=y
CONFIG_X86_HT=y
CONFIG_X86_IO_APIC=y
CONFIG_X86_LOCAL_APIC=y
CONFIG_MTRR=y
CONFIG_SMP=y
# CONFIG_SCHED_SMT is not set
CONFIG_SCHED_MC=y
# CONFIG_PREEMPT_NONE is not set
# CONFIG_PREEMPT_VOLUNTARY is not set
CONFIG_PREEMPT=y
CONFIG_PREEMPT_BKL=y
# CONFIG_NUMA is not set
CONFIG_ARCH_SPARSEMEM_ENABLE=y
CONFIG_ARCH_FLATMEM_ENABLE=y
CONFIG_SELECT_MEMORY_MODEL=y
CONFIG_FLATMEM_MANUAL=y
# CONFIG_DISCONTIGMEM_MANUAL is not set
# CONFIG_SPARSEMEM_MANUAL is not set
CONFIG_FLATMEM=y
CONFIG_FLAT_NODE_MEM_MAP=y
# CONFIG_SPARSEMEM_STATIC is not set
CONFIG_SPLIT_PTLOCK_CPUS=4
CONFIG_RESOURCES_64BIT=y
CONFIG_NR_CPUS=8
# CONFIG_HOTPLUG_CPU is not set
CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y
CONFIG_HPET_TIMER=y
# CONFIG_HPET_EMULATE_RTC is not set
CONFIG_IOMMU=y
CONFIG_CALGARY_IOMMU=y
CONFIG_SWIOTLB=y
CONFIG_X86_MCE=y
CONFIG_X86_MCE_INTEL=y
# CONFIG_X86_MCE_AMD is not set
CONFIG_KEXEC=y
# CONFIG_CRASH_DUMP is not set
CONFIG_PHYSICAL_START=0x200000
CONFIG_SECCOMP=y
# CONFIG_CC_STACKPROTECTOR is not set
# CONFIG_HZ_100 is not set
# CONFIG_HZ_250 is not set
CONFIG_HZ_1000=y
CONFIG_HZ=1000
# CONFIG_REORDER is not set
CONFIG_K8_NB=y
CONFIG_GENERIC_HARDIRQS=y
CONFIG_GENERIC_IRQ_PROBE=y
CONFIG_ISA_DMA_API=y
CONFIG_GENERIC_PENDING_IRQ=y

#
# Power management options
#
CONFIG_PM=y
CONFIG_PM_LEGACY=y
# CONFIG_PM_DEBUG is not set
# CONFIG_PM_SYSFS_DEPRECATED is not set

#
# ACPI (Advanced Configuration and Power Interface) Support
#
CONFIG_ACPI=y
CONFIG_ACPI_AC=y
CONFIG_ACPI_BATTERY=y
CONFIG_ACPI_BUTTON=y
CONFIG_ACPI_VIDEO=y
CONFIG_ACPI_HOTKEY=y
CONFIG_ACPI_FAN=y
CONFIG_ACPI_DOCK=y
CONFIG_ACPI_PROCESSOR=y
CONFIG_ACPI_THERMAL=y
# CONFIG_ACPI_ASUS is not set
# CONFIG_ACPI_IBM is not set
# CONFIG_ACPI_TOSHIBA is not set
CONFIG_ACPI_BLACKLIST_YEAR=0
# CONFIG_ACPI_DEBUG is not set
CONFIG_ACPI_EC=y
CONFIG_ACPI_POWER=y
CONFIG_ACPI_SYSTEM=y
CONFIG_X86_PM_TIMER=y
# CONFIG_ACPI_CONTAINER is not set
# CONFIG_ACPI_SBS is not set

#
# CPU Frequency scaling
#
CONFIG_CPU_FREQ=y
CONFIG_CPU_FREQ_TABLE=y
# CONFIG_CPU_FREQ_DEBUG is not set
CONFIG_CPU_FREQ_STAT=y
CONFIG_CPU_FREQ_STAT_DETAILS=y
CONFIG_CPU_FREQ_DEFAULT_GOV_PERFORMANCE=y
# CONFIG_CPU_FREQ_DEFAULT_GOV_USERSPACE is not set
CONFIG_CPU_FREQ_GOV_PERFORMANCE=y
CONFIG_CPU_FREQ_GOV_POWERSAVE=y
CONFIG_CPU_FREQ_GOV_USERSPACE=y
CONFIG_CPU_FREQ_GOV_ONDEMAND=y
CONFIG_CPU_FREQ_GOV_CONSERVATIVE=y

#
# CPUFreq processor drivers
#
# CONFIG_X86_POWERNOW_K8 is not set
CONFIG_X86_SPEEDSTEP_CENTRINO=y
CONFIG_X86_SPEEDSTEP_CENTRINO_ACPI=y
CONFIG_X86_ACPI_CPUFREQ=y

#
# shared options
#
# CONFIG_X86_ACPI_CPUFREQ_PROC_INTF is not set
# CONFIG_X86_SPEEDSTEP_LIB is not set

#
# Bus options (PCI etc.)
#
CONFIG_PCI=y
CONFIG_PCI_DIRECT=y
CONFIG_PCI_MMCONFIG=y
CONFIG_PCIEPORTBUS=y
# CONFIG_HOTPLUG_PCI_PCIE is not set
CONFIG_PCIEAER=y
CONFIG_PCI_MSI=y
# CONFIG_PCI_MULTITHREAD_PROBE is not set
# CONFIG_PCI_DEBUG is not set

#
# PCCARD (PCMCIA/CardBus) support
#
CONFIG_PCCARD=y
# CONFIG_PCMCIA_DEBUG is not set
CONFIG_PCMCIA=y
CONFIG_PCMCIA_LOAD_CIS=y
CONFIG_PCMCIA_IOCTL=y
CONFIG_CARDBUS=y

#
# PC-card bridges
#
CONFIG_YENTA=y
CONFIG_YENTA_O2=y
CONFIG_YENTA_RICOH=y
CONFIG_YENTA_TI=y
CONFIG_YENTA_ENE_TUNE=y
CONFIG_YENTA_TOSHIBA=y
# CONFIG_PD6729 is not set
# CONFIG_I82092 is not set
CONFIG_PCCARD_NONSTATIC=y

#
# PCI Hotplug Support
#
CONFIG_HOTPLUG_PCI=y
CONFIG_HOTPLUG_PCI_FAKE=y
CONFIG_HOTPLUG_PCI_ACPI=y
CONFIG_HOTPLUG_PCI_ACPI_IBM=y
# CONFIG_HOTPLUG_PCI_CPCI is not set
# CONFIG_HOTPLUG_PCI_SHPC is not set

#
# Executable file formats / Emulations
#
CONFIG_BINFMT_ELF=y
CONFIG_BINFMT_MISC=y
CONFIG_IA32_EMULATION=y
CONFIG_IA32_AOUT=y
CONFIG_COMPAT=y
CONFIG_SYSVIPC_COMPAT=y

#
# Networking
#
CONFIG_NET=y

#
# Networking options
#
# CONFIG_NETDEBUG is not set
CONFIG_PACKET=y
CONFIG_PACKET_MMAP=y
CONFIG_UNIX=y
CONFIG_XFRM=y
CONFIG_XFRM_USER=y
# CONFIG_XFRM_SUB_POLICY is not set
CONFIG_NET_KEY=y
CONFIG_INET=y
CONFIG_IP_MULTICAST=y
CONFIG_IP_ADVANCED_ROUTER=y
CONFIG_ASK_IP_FIB_HASH=y
# CONFIG_IP_FIB_TRIE is not set
CONFIG_IP_FIB_HASH=y
CONFIG_IP_MULTIPLE_TABLES=y
CONFIG_IP_ROUTE_FWMARK=y
CONFIG_IP_ROUTE_MULTIPATH=y
CONFIG_IP_ROUTE_MULTIPATH_CACHED=y
CONFIG_IP_ROUTE_MULTIPATH_RR=y
CONFIG_IP_ROUTE_MULTIPATH_RANDOM=y
CONFIG_IP_ROUTE_MULTIPATH_WRANDOM=y
CONFIG_IP_ROUTE_MULTIPATH_DRR=y
CONFIG_IP_ROUTE_VERBOSE=y
CONFIG_IP_PNP=y
CONFIG_IP_PNP_DHCP=y
# CONFIG_IP_PNP_BOOTP is not set
# CONFIG_IP_PNP_RARP is not set
CONFIG_NET_IPIP=y
CONFIG_NET_IPGRE=y
CONFIG_NET_IPGRE_BROADCAST=y
CONFIG_IP_MROUTE=y
CONFIG_IP_PIMSM_V1=y
CONFIG_IP_PIMSM_V2=y
# CONFIG_ARPD is not set
# CONFIG_SYN_COOKIES is not set
CONFIG_INET_AH=y
CONFIG_INET_ESP=y
CONFIG_INET_IPCOMP=y
CONFIG_INET_XFRM_TUNNEL=y
CONFIG_INET_TUNNEL=y
CONFIG_INET_XFRM_MODE_TRANSPORT=y
CONFIG_INET_XFRM_MODE_TUNNEL=y
CONFIG_INET_DIAG=y
CONFIG_INET_TCP_DIAG=y
# CONFIG_TCP_CONG_ADVANCED is not set
CONFIG_TCP_CONG_CUBIC=y
CONFIG_DEFAULT_TCP_CONG="cubic"

#
# IP: Virtual Server Configuration
#
# CONFIG_IP_VS is not set
# CONFIG_IPV6 is not set
# CONFIG_INET6_XFRM_TUNNEL is not set
# CONFIG_INET6_TUNNEL is not set
# CONFIG_NETWORK_SECMARK is not set
CONFIG_NETFILTER=y
# CONFIG_NETFILTER_DEBUG is not set

#
# Core Netfilter Configuration
#
CONFIG_NETFILTER_NETLINK=m
CONFIG_NETFILTER_NETLINK_QUEUE=m
CONFIG_NETFILTER_NETLINK_LOG=m
# CONFIG_NETFILTER_XTABLES is not set

#
# IP: Netfilter Configuration
#
CONFIG_IP_NF_CONNTRACK=m
CONFIG_IP_NF_CT_ACCT=y
CONFIG_IP_NF_CONNTRACK_MARK=y
# CONFIG_IP_NF_CONNTRACK_EVENTS is not set
CONFIG_IP_NF_CONNTRACK_NETLINK=m
CONFIG_IP_NF_CT_PROTO_SCTP=m
CONFIG_IP_NF_FTP=m
CONFIG_IP_NF_IRC=m
CONFIG_IP_NF_NETBIOS_NS=m
CONFIG_IP_NF_TFTP=m
CONFIG_IP_NF_AMANDA=m
CONFIG_IP_NF_PPTP=m
# CONFIG_IP_NF_H323 is not set
# CONFIG_IP_NF_SIP is not set
CONFIG_IP_NF_QUEUE=m

#
# DCCP Configuration (EXPERIMENTAL)
#
# CONFIG_IP_DCCP is not set

#
# SCTP Configuration (EXPERIMENTAL)
#
# CONFIG_IP_SCTP is not set

#
# TIPC Configuration (EXPERIMENTAL)
#
# CONFIG_TIPC is not set
# CONFIG_ATM is not set
# CONFIG_BRIDGE is not set
# CONFIG_VLAN_8021Q is not set
# CONFIG_DECNET is not set
# CONFIG_LLC2 is not set
# CONFIG_IPX is not set
# CONFIG_ATALK is not set
# CONFIG_X25 is not set
# CONFIG_LAPB is not set
# CONFIG_ECONET is not set
# CONFIG_WAN_ROUTER is not set

#
# QoS and/or fair queueing
#
# CONFIG_NET_SCHED is not set

#
# Network testing
#
CONFIG_NET_PKTGEN=y
# CONFIG_HAMRADIO is not set
# CONFIG_IRDA is not set
# CONFIG_BT is not set
# CONFIG_IEEE80211 is not set
CONFIG_FIB_RULES=y

#
# Device Drivers
#

#
# Generic Driver Options
#
CONFIG_STANDALONE=y
CONFIG_PREVENT_FIRMWARE_BUILD=y
CONFIG_FW_LOADER=y
# CONFIG_DEBUG_DRIVER is not set
# CONFIG_SYS_HYPERVISOR is not set

#
# Connector - unified userspace <-> kernelspace linker
#
CONFIG_CONNECTOR=y
CONFIG_PROC_EVENTS=y

#
# Memory Technology Devices (MTD)
#
# CONFIG_MTD is not set

#
# Parallel port support
#
# CONFIG_PARPORT is not set

#
# Plug and Play support
#
CONFIG_PNP=y
# CONFIG_PNP_DEBUG is not set

#
# Protocols
#
CONFIG_PNPACPI=y

#
# Block devices
#
# CONFIG_BLK_DEV_FD is not set
# CONFIG_BLK_CPQ_DA is not set
# CONFIG_BLK_CPQ_CISS_DA is not set
# CONFIG_BLK_DEV_DAC960 is not set
# CONFIG_BLK_DEV_UMEM is not set
# CONFIG_BLK_DEV_COW_COMMON is not set
CONFIG_BLK_DEV_LOOP=y
CONFIG_BLK_DEV_CRYPTOLOOP=y
# CONFIG_BLK_DEV_NBD is not set
# CONFIG_BLK_DEV_SX8 is not set
# CONFIG_BLK_DEV_UB is not set
CONFIG_BLK_DEV_RAM=y
CONFIG_BLK_DEV_RAM_COUNT=16
CONFIG_BLK_DEV_RAM_SIZE=65536
CONFIG_BLK_DEV_RAM_BLOCKSIZE=1024
# CONFIG_BLK_DEV_INITRD is not set
CONFIG_CDROM_PKTCDVD=y
CONFIG_CDROM_PKTCDVD_BUFFERS=8
# CONFIG_CDROM_PKTCDVD_WCACHE is not set
# CONFIG_ATA_OVER_ETH is not set

#
# ATA/ATAPI/MFM/RLL support
#
CONFIG_IDE=y
CONFIG_BLK_DEV_IDE=y

#
# Please see Documentation/ide.txt for help/info on IDE drives
#
# CONFIG_BLK_DEV_IDE_SATA is not set
# CONFIG_BLK_DEV_HD_IDE is not set
CONFIG_BLK_DEV_IDEDISK=y
# CONFIG_IDEDISK_MULTI_MODE is not set
CONFIG_BLK_DEV_IDECS=y
CONFIG_BLK_DEV_IDECD=y
# CONFIG_BLK_DEV_IDETAPE is not set
# CONFIG_BLK_DEV_IDEFLOPPY is not set
CONFIG_BLK_DEV_IDESCSI=y
# CONFIG_IDE_TASK_IOCTL is not set

#
# IDE chipset support/bugfixes
#
CONFIG_IDE_GENERIC=y
# CONFIG_BLK_DEV_CMD640 is not set
# CONFIG_BLK_DEV_IDEPNP is not set
CONFIG_BLK_DEV_IDEPCI=y
CONFIG_IDEPCI_SHARE_IRQ=y
# CONFIG_BLK_DEV_OFFBOARD is not set
CONFIG_BLK_DEV_GENERIC=y
# CONFIG_BLK_DEV_OPTI621 is not set
# CONFIG_BLK_DEV_RZ1000 is not set
CONFIG_BLK_DEV_IDEDMA_PCI=y
# CONFIG_BLK_DEV_IDEDMA_FORCED is not set
CONFIG_IDEDMA_PCI_AUTO=y
# CONFIG_IDEDMA_ONLYDISK is not set
# CONFIG_BLK_DEV_AEC62XX is not set
# CONFIG_BLK_DEV_ALI15X3 is not set
CONFIG_BLK_DEV_AMD74XX=y
CONFIG_BLK_DEV_ATIIXP=y
# CONFIG_BLK_DEV_CMD64X is not set
# CONFIG_BLK_DEV_TRIFLEX is not set
# CONFIG_BLK_DEV_CY82C693 is not set
# CONFIG_BLK_DEV_CS5520 is not set
# CONFIG_BLK_DEV_CS5530 is not set
# CONFIG_BLK_DEV_HPT34X is not set
# CONFIG_BLK_DEV_HPT366 is not set
# CONFIG_BLK_DEV_SC1200 is not set
# CONFIG_BLK_DEV_PIIX is not set
# CONFIG_BLK_DEV_IT821X is not set
# CONFIG_BLK_DEV_NS87415 is not set
# CONFIG_BLK_DEV_PDC202XX_OLD is not set
# CONFIG_BLK_DEV_PDC202XX_NEW is not set
# CONFIG_BLK_DEV_SVWKS is not set
# CONFIG_BLK_DEV_SIIMAGE is not set
# CONFIG_BLK_DEV_SIS5513 is not set
# CONFIG_BLK_DEV_SLC90E66 is not set
# CONFIG_BLK_DEV_TRM290 is not set
# CONFIG_BLK_DEV_VIA82CXXX is not set
# CONFIG_IDE_ARM is not set
CONFIG_BLK_DEV_IDEDMA=y
# CONFIG_IDEDMA_IVB is not set
CONFIG_IDEDMA_AUTO=y
# CONFIG_BLK_DEV_HD is not set

#
# SCSI device support
#
# CONFIG_RAID_ATTRS is not set
CONFIG_SCSI=y
CONFIG_SCSI_NETLINK=y
CONFIG_SCSI_PROC_FS=y

#
# SCSI support type (disk, tape, CD-ROM)
#
CONFIG_BLK_DEV_SD=y
# CONFIG_CHR_DEV_ST is not set
# CONFIG_CHR_DEV_OSST is not set
CONFIG_BLK_DEV_SR=y
# CONFIG_BLK_DEV_SR_VENDOR is not set
CONFIG_CHR_DEV_SG=y
# CONFIG_CHR_DEV_SCH is not set

#
# Some SCSI devices (e.g. CD jukebox) support multiple LUNs
#
CONFIG_SCSI_MULTI_LUN=y
CONFIG_SCSI_CONSTANTS=y
CONFIG_SCSI_LOGGING=y

#
# SCSI Transports
#
CONFIG_SCSI_SPI_ATTRS=y
CONFIG_SCSI_FC_ATTRS=y
CONFIG_SCSI_ISCSI_ATTRS=y
CONFIG_SCSI_SAS_ATTRS=y
# CONFIG_SCSI_SAS_LIBSAS is not set

#
# SCSI low-level drivers
#
# CONFIG_ISCSI_TCP is not set
# CONFIG_BLK_DEV_3W_XXXX_RAID is not set
# CONFIG_SCSI_3W_9XXX is not set
# CONFIG_SCSI_ACARD is not set
# CONFIG_SCSI_AACRAID is not set
# CONFIG_SCSI_AIC7XXX is not set
# CONFIG_SCSI_AIC7XXX_OLD is not set
# CONFIG_SCSI_AIC79XX is not set
# CONFIG_SCSI_AIC94XX is not set
# CONFIG_SCSI_ARCMSR is not set
# CONFIG_MEGARAID_NEWGEN is not set
# CONFIG_MEGARAID_LEGACY is not set
# CONFIG_MEGARAID_SAS is not set
# CONFIG_SCSI_HPTIOP is not set
# CONFIG_SCSI_BUSLOGIC is not set
# CONFIG_SCSI_DMX3191D is not set
# CONFIG_SCSI_EATA is not set
# CONFIG_SCSI_FUTURE_DOMAIN is not set
# CONFIG_SCSI_GDTH is not set
# CONFIG_SCSI_IPS is not set
# CONFIG_SCSI_INITIO is not set
# CONFIG_SCSI_INIA100 is not set
# CONFIG_SCSI_STEX is not set
# CONFIG_SCSI_SYM53C8XX_2 is not set
# CONFIG_SCSI_IPR is not set
# CONFIG_SCSI_QLOGIC_1280 is not set
# CONFIG_SCSI_QLA_FC is not set
# CONFIG_SCSI_LPFC is not set
# CONFIG_SCSI_DC395x is not set
# CONFIG_SCSI_DC390T is not set
# CONFIG_SCSI_DEBUG is not set

#
# PCMCIA SCSI adapter support
#
# CONFIG_PCMCIA_FDOMAIN is not set
# CONFIG_PCMCIA_QLOGIC is not set
# CONFIG_PCMCIA_SYM53C500 is not set

#
# Serial ATA (prod) and Parallel ATA (experimental) drivers
#
# CONFIG_ATA is not set

#
# Multi-device support (RAID and LVM)
#
# CONFIG_MD is not set

#
# Fusion MPT device support
#
# CONFIG_FUSION is not set
# CONFIG_FUSION_SPI is not set
# CONFIG_FUSION_FC is not set
# CONFIG_FUSION_SAS is not set

#
# IEEE 1394 (FireWire) support
#
# CONFIG_IEEE1394 is not set

#
# I2O device support
#
# CONFIG_I2O is not set

#
# Network device support
#
CONFIG_NETDEVICES=y
CONFIG_DUMMY=y
# CONFIG_BONDING is not set
# CONFIG_EQUALIZER is not set
CONFIG_TUN=y
# CONFIG_NET_SB1000 is not set

#
# ARCnet devices
#
# CONFIG_ARCNET is not set

#
# PHY device support
#

#
# Ethernet (10 or 100Mbit)
#
# CONFIG_NET_ETHERNET is not set

#
# Ethernet (1000 Mbit)
#
# CONFIG_ACENIC is not set
# CONFIG_DL2K is not set
# CONFIG_E1000 is not set
# CONFIG_NS83820 is not set
# CONFIG_HAMACHI is not set
# CONFIG_YELLOWFIN is not set
# CONFIG_R8169 is not set
# CONFIG_SIS190 is not set
# CONFIG_SKGE is not set
# CONFIG_SKY2 is not set
CONFIG_SK98LIN=y
# CONFIG_TIGON3 is not set
# CONFIG_BNX2 is not set
# CONFIG_QLA3XXX is not set

#
# Ethernet (10000 Mbit)
#
# CONFIG_CHELSIO_T1 is not set
# CONFIG_IXGB is not set
# CONFIG_S2IO is not set
# CONFIG_MYRI10GE is not set

#
# Token Ring devices
#
# CONFIG_TR is not set

#
# Wireless LAN (non-hamradio)
#
# CONFIG_NET_RADIO is not set

#
# PCMCIA network device support
#
# CONFIG_NET_PCMCIA is not set

#
# Wan interfaces
#
# CONFIG_WAN is not set
# CONFIG_FDDI is not set
# CONFIG_HIPPI is not set
# CONFIG_PPP is not set
# CONFIG_SLIP is not set
# CONFIG_NET_FC is not set
# CONFIG_SHAPER is not set
CONFIG_NETCONSOLE=y
CONFIG_NETPOLL=y
CONFIG_NETPOLL_RX=y
CONFIG_NETPOLL_TRAP=y
CONFIG_NET_POLL_CONTROLLER=y

#
# ISDN subsystem
#
# CONFIG_ISDN is not set

#
# Telephony Support
#
# CONFIG_PHONE is not set

#
# Input device support
#
CONFIG_INPUT=y

#
# Userland interfaces
#
CONFIG_INPUT_MOUSEDEV=y
CONFIG_INPUT_MOUSEDEV_PSAUX=y
CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
# CONFIG_INPUT_JOYDEV is not set
# CONFIG_INPUT_TSDEV is not set
CONFIG_INPUT_EVDEV=y
# CONFIG_INPUT_EVBUG is not set

#
# Input Device Drivers
#
CONFIG_INPUT_KEYBOARD=y
CONFIG_KEYBOARD_ATKBD=y
CONFIG_KEYBOARD_SUNKBD=m
CONFIG_KEYBOARD_LKKBD=m
CONFIG_KEYBOARD_XTKBD=m
CONFIG_KEYBOARD_NEWTON=m
CONFIG_INPUT_MOUSE=y
CONFIG_MOUSE_PS2=m
CONFIG_MOUSE_SERIAL=m
CONFIG_MOUSE_VSXXXAA=m
# CONFIG_INPUT_JOYSTICK is not set
# CONFIG_INPUT_TOUCHSCREEN is not set
CONFIG_INPUT_MISC=y
CONFIG_INPUT_PCSPKR=y
CONFIG_INPUT_UINPUT=y

#
# Hardware I/O ports
#
CONFIG_SERIO=y
CONFIG_SERIO_I8042=y
CONFIG_SERIO_SERPORT=y
# CONFIG_SERIO_CT82C710 is not set
CONFIG_SERIO_PCIPS2=y
CONFIG_SERIO_LIBPS2=y
CONFIG_SERIO_RAW=y
CONFIG_GAMEPORT=y
# CONFIG_GAMEPORT_NS558 is not set
# CONFIG_GAMEPORT_L4 is not set
# CONFIG_GAMEPORT_EMU10K1 is not set
# CONFIG_GAMEPORT_FM801 is not set

#
# Character devices
#
CONFIG_VT=y
CONFIG_VT_CONSOLE=y
CONFIG_HW_CONSOLE=y
# CONFIG_VT_HW_CONSOLE_BINDING is not set
# CONFIG_SERIAL_NONSTANDARD is not set

#
# Serial drivers
#
CONFIG_SERIAL_8250=y
CONFIG_SERIAL_8250_CONSOLE=y
CONFIG_SERIAL_8250_PCI=y
CONFIG_SERIAL_8250_PNP=y
CONFIG_SERIAL_8250_CS=m
CONFIG_SERIAL_8250_NR_UARTS=48
CONFIG_SERIAL_8250_RUNTIME_UARTS=4
CONFIG_SERIAL_8250_EXTENDED=y
CONFIG_SERIAL_8250_MANY_PORTS=y
CONFIG_SERIAL_8250_SHARE_IRQ=y
# CONFIG_SERIAL_8250_DETECT_IRQ is not set
CONFIG_SERIAL_8250_RSA=y

#
# Non-8250 serial port support
#
CONFIG_SERIAL_CORE=y
CONFIG_SERIAL_CORE_CONSOLE=y
CONFIG_SERIAL_JSM=m
CONFIG_UNIX98_PTYS=y
# CONFIG_LEGACY_PTYS is not set

#
# IPMI
#
# CONFIG_IPMI_HANDLER is not set

#
# Watchdog Cards
#
# CONFIG_WATCHDOG is not set
CONFIG_HW_RANDOM=y
CONFIG_HW_RANDOM_INTEL=y
CONFIG_HW_RANDOM_AMD=y
CONFIG_HW_RANDOM_GEODE=y
# CONFIG_NVRAM is not set
CONFIG_RTC=y
# CONFIG_DTLK is not set
# CONFIG_R3964 is not set
# CONFIG_APPLICOM is not set

#
# Ftape, the floppy tape device driver
#
CONFIG_AGP=y
CONFIG_AGP_AMD64=y
# CONFIG_AGP_INTEL is not set
# CONFIG_AGP_SIS is not set
# CONFIG_AGP_VIA is not set
CONFIG_DRM=y
# CONFIG_DRM_TDFX is not set
# CONFIG_DRM_R128 is not set
# CONFIG_DRM_RADEON is not set
# CONFIG_DRM_MGA is not set
# CONFIG_DRM_SIS is not set
# CONFIG_DRM_VIA is not set
# CONFIG_DRM_SAVAGE is not set

#
# PCMCIA character devices
#
# CONFIG_SYNCLINK_CS is not set
# CONFIG_CARDMAN_4000 is not set
# CONFIG_CARDMAN_4040 is not set
# CONFIG_MWAVE is not set
# CONFIG_PC8736x_GPIO is not set
# CONFIG_RAW_DRIVER is not set
CONFIG_HPET=y
# CONFIG_HPET_RTC_IRQ is not set
CONFIG_HPET_MMAP=y
CONFIG_HANGCHECK_TIMER=y

#
# TPM devices
#
CONFIG_TCG_TPM=m
# CONFIG_TCG_TIS is not set
CONFIG_TCG_NSC=m
CONFIG_TCG_ATMEL=m
CONFIG_TCG_INFINEON=m
# CONFIG_TELCLOCK is not set

#
# I2C support
#
CONFIG_I2C=y
# CONFIG_I2C_CHARDEV is not set

#
# I2C Algorithms
#
CONFIG_I2C_ALGOBIT=y
# CONFIG_I2C_ALGOPCF is not set
# CONFIG_I2C_ALGOPCA is not set

#
# I2C Hardware Bus support
#
# CONFIG_I2C_ALI1535 is not set
# CONFIG_I2C_ALI1563 is not set
# CONFIG_I2C_ALI15X3 is not set
CONFIG_I2C_AMD756=y
# CONFIG_I2C_AMD756_S4882 is not set
CONFIG_I2C_AMD8111=y
CONFIG_I2C_I801=y
CONFIG_I2C_I810=y
CONFIG_I2C_PIIX4=y
CONFIG_I2C_NFORCE2=y
# CONFIG_I2C_OCORES is not set
# CONFIG_I2C_PARPORT_LIGHT is not set
# CONFIG_I2C_PROSAVAGE is not set
# CONFIG_I2C_SAVAGE4 is not set
# CONFIG_I2C_SIS5595 is not set
# CONFIG_I2C_SIS630 is not set
# CONFIG_I2C_SIS96X is not set
# CONFIG_I2C_STUB is not set
# CONFIG_I2C_VIA is not set
# CONFIG_I2C_VIAPRO is not set
# CONFIG_I2C_VOODOO3 is not set
# CONFIG_I2C_PCA_ISA is not set

#
# Miscellaneous I2C Chip support
#
CONFIG_SENSORS_DS1337=m
CONFIG_SENSORS_DS1374=m
CONFIG_SENSORS_EEPROM=m
CONFIG_SENSORS_PCF8574=m
CONFIG_SENSORS_PCA9539=m
CONFIG_SENSORS_PCF8591=m
CONFIG_SENSORS_MAX6875=m
# CONFIG_I2C_DEBUG_CORE is not set
# CONFIG_I2C_DEBUG_ALGO is not set
# CONFIG_I2C_DEBUG_BUS is not set
# CONFIG_I2C_DEBUG_CHIP is not set

#
# SPI support
#
# CONFIG_SPI is not set
# CONFIG_SPI_MASTER is not set

#
# Dallas's 1-wire bus
#
# CONFIG_W1 is not set

#
# Hardware Monitoring support
#
# CONFIG_HWMON is not set
# CONFIG_HWMON_VID is not set

#
# Misc devices
#
# CONFIG_IBM_ASM is not set

#
# Multimedia devices
#
# CONFIG_VIDEO_DEV is not set
CONFIG_VIDEO_V4L2=y

#
# Digital Video Broadcasting Devices
#
# CONFIG_DVB is not set
# CONFIG_USB_DABUSB is not set

#
# Graphics support
#
CONFIG_FIRMWARE_EDID=y
CONFIG_FB=y
CONFIG_FB_CFB_FILLRECT=y
CONFIG_FB_CFB_COPYAREA=y
CONFIG_FB_CFB_IMAGEBLIT=y
# CONFIG_FB_MACMODES is not set
# CONFIG_FB_BACKLIGHT is not set
CONFIG_FB_MODE_HELPERS=y
CONFIG_FB_TILEBLITTING=y
# CONFIG_FB_CIRRUS is not set
# CONFIG_FB_PM2 is not set
# CONFIG_FB_CYBER2000 is not set
# CONFIG_FB_ARC is not set
# CONFIG_FB_ASILIANT is not set
# CONFIG_FB_IMSTT is not set
CONFIG_FB_VGA16=y
CONFIG_FB_VESA=y
# CONFIG_FB_HGA is not set
# CONFIG_FB_S1D13XXX is not set
CONFIG_FB_NVIDIA=y
CONFIG_FB_NVIDIA_I2C=y
CONFIG_FB_RIVA=y
CONFIG_FB_RIVA_I2C=y
# CONFIG_FB_RIVA_DEBUG is not set
# CONFIG_FB_INTEL is not set
# CONFIG_FB_MATROX is not set
# CONFIG_FB_RADEON is not set
# CONFIG_FB_ATY128 is not set
# CONFIG_FB_ATY is not set
# CONFIG_FB_SAVAGE is not set
# CONFIG_FB_SIS is not set
# CONFIG_FB_NEOMAGIC is not set
# CONFIG_FB_KYRO is not set
# CONFIG_FB_3DFX is not set
# CONFIG_FB_VOODOO1 is not set
# CONFIG_FB_TRIDENT is not set
# CONFIG_FB_GEODE is not set
# CONFIG_FB_VIRTUAL is not set

#
# Console display driver support
#
CONFIG_VGA_CONSOLE=y
CONFIG_VGACON_SOFT_SCROLLBACK=y
CONFIG_VGACON_SOFT_SCROLLBACK_SIZE=64
CONFIG_VIDEO_SELECT=y
CONFIG_DUMMY_CONSOLE=y
CONFIG_FRAMEBUFFER_CONSOLE=y
CONFIG_FRAMEBUFFER_CONSOLE_ROTATION=y
CONFIG_FONTS=y
CONFIG_FONT_8x8=y
CONFIG_FONT_8x16=y
# CONFIG_FONT_6x11 is not set
CONFIG_FONT_7x14=y
# CONFIG_FONT_PEARL_8x8 is not set
# CONFIG_FONT_ACORN_8x8 is not set
# CONFIG_FONT_MINI_4x6 is not set
# CONFIG_FONT_SUN8x16 is not set
# CONFIG_FONT_SUN12x22 is not set
# CONFIG_FONT_10x18 is not set

#
# Logo configuration
#
# CONFIG_LOGO is not set
CONFIG_BACKLIGHT_LCD_SUPPORT=y
CONFIG_BACKLIGHT_CLASS_DEVICE=y
CONFIG_BACKLIGHT_DEVICE=y
CONFIG_LCD_CLASS_DEVICE=y
CONFIG_LCD_DEVICE=y

#
# Sound
#
# CONFIG_SOUND is not set

#
# USB support
#
CONFIG_USB_ARCH_HAS_HCD=y
CONFIG_USB_ARCH_HAS_OHCI=y
CONFIG_USB_ARCH_HAS_EHCI=y
CONFIG_USB=y
# CONFIG_USB_DEBUG is not set

#
# Miscellaneous USB options
#
CONFIG_USB_DEVICEFS=y
# CONFIG_USB_BANDWIDTH is not set
# CONFIG_USB_DYNAMIC_MINORS is not set
# CONFIG_USB_SUSPEND is not set
# CONFIG_USB_OTG is not set

#
# USB Host Controller Drivers
#
CONFIG_USB_EHCI_HCD=y
# CONFIG_USB_EHCI_SPLIT_ISO is not set
# CONFIG_USB_EHCI_ROOT_HUB_TT is not set
# CONFIG_USB_EHCI_TT_NEWSCHED is not set
# CONFIG_USB_ISP116X_HCD is not set
CONFIG_USB_OHCI_HCD=y
# CONFIG_USB_OHCI_BIG_ENDIAN is not set
CONFIG_USB_OHCI_LITTLE_ENDIAN=y
CONFIG_USB_UHCI_HCD=y
# CONFIG_USB_SL811_HCD is not set

#
# USB Device Class drivers
#
# CONFIG_USB_ACM is not set
# CONFIG_USB_PRINTER is not set

#
# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
#

#
# may also be needed; see USB_STORAGE Help for more information
#
CONFIG_USB_STORAGE=y
# CONFIG_USB_STORAGE_DEBUG is not set
CONFIG_USB_STORAGE_DATAFAB=y
CONFIG_USB_STORAGE_FREECOM=y
CONFIG_USB_STORAGE_ISD200=y
CONFIG_USB_STORAGE_DPCM=y
CONFIG_USB_STORAGE_USBAT=y
CONFIG_USB_STORAGE_SDDR09=y
CONFIG_USB_STORAGE_SDDR55=y
CONFIG_USB_STORAGE_JUMPSHOT=y
CONFIG_USB_STORAGE_ALAUDA=y
# CONFIG_USB_STORAGE_KARMA is not set
# CONFIG_USB_LIBUSUAL is not set

#
# USB Input Devices
#
CONFIG_USB_HID=y
CONFIG_USB_HIDINPUT=y
# CONFIG_USB_HIDINPUT_POWERBOOK is not set
# CONFIG_HID_FF is not set
CONFIG_USB_HIDDEV=y
# CONFIG_USB_AIPTEK is not set
# CONFIG_USB_WACOM is not set
# CONFIG_USB_ACECAD is not set
# CONFIG_USB_KBTAB is not set
# CONFIG_USB_POWERMATE is not set
# CONFIG_USB_TOUCHSCREEN is not set
# CONFIG_USB_YEALINK is not set
# CONFIG_USB_XPAD is not set
# CONFIG_USB_ATI_REMOTE is not set
# CONFIG_USB_ATI_REMOTE2 is not set
# CONFIG_USB_KEYSPAN_REMOTE is not set
# CONFIG_USB_APPLETOUCH is not set
# CONFIG_USB_TRANCEVIBRATOR is not set

#
# USB Imaging devices
#
# CONFIG_USB_MDC800 is not set
# CONFIG_USB_MICROTEK is not set

#
# USB Network Adapters
#
# CONFIG_USB_CATC is not set
# CONFIG_USB_KAWETH is not set
# CONFIG_USB_PEGASUS is not set
# CONFIG_USB_RTL8150 is not set
# CONFIG_USB_USBNET is not set
# CONFIG_USB_MON is not set

#
# USB port drivers
#

#
# USB Serial Converter support
#
# CONFIG_USB_SERIAL is not set

#
# USB Miscellaneous drivers
#
# CONFIG_USB_EMI62 is not set
# CONFIG_USB_EMI26 is not set
# CONFIG_USB_ADUTUX is not set
# CONFIG_USB_AUERSWALD is not set
# CONFIG_USB_RIO500 is not set
# CONFIG_USB_LEGOTOWER is not set
# CONFIG_USB_LCD is not set
# CONFIG_USB_LED is not set
# CONFIG_USB_CYPRESS_CY7C63 is not set
# CONFIG_USB_CYTHERM is not set
# CONFIG_USB_PHIDGET is not set
# CONFIG_USB_IDMOUSE is not set
# CONFIG_USB_FTDI_ELAN is not set
# CONFIG_USB_APPLEDISPLAY is not set
# CONFIG_USB_SISUSBVGA is not set
# CONFIG_USB_LD is not set
# CONFIG_USB_TEST is not set

#
# USB DSL modem support
#

#
# USB Gadget Support
#
# CONFIG_USB_GADGET is not set

#
# MMC/SD Card support
#
# CONFIG_MMC is not set

#
# LED devices
#
# CONFIG_NEW_LEDS is not set

#
# LED drivers
#

#
# LED Triggers
#

#
# InfiniBand support
#
# CONFIG_INFINIBAND is not set

#
# EDAC - error detection and reporting (RAS) (EXPERIMENTAL)
#
# CONFIG_EDAC is not set

#
# Real Time Clock
#
CONFIG_RTC_LIB=y
CONFIG_RTC_CLASS=y
CONFIG_RTC_HCTOSYS=y
CONFIG_RTC_HCTOSYS_DEVICE="rtc0"
# CONFIG_RTC_DEBUG is not set

#
# RTC interfaces
#
# CONFIG_RTC_INTF_SYSFS is not set
# CONFIG_RTC_INTF_PROC is not set
# CONFIG_RTC_INTF_DEV is not set

#
# RTC drivers
#
# CONFIG_RTC_DRV_X1205 is not set
# CONFIG_RTC_DRV_DS1307 is not set
# CONFIG_RTC_DRV_DS1553 is not set
# CONFIG_RTC_DRV_ISL1208 is not set
# CONFIG_RTC_DRV_DS1672 is not set
# CONFIG_RTC_DRV_DS1742 is not set
# CONFIG_RTC_DRV_PCF8563 is not set
# CONFIG_RTC_DRV_PCF8583 is not set
# CONFIG_RTC_DRV_RS5C372 is not set
# CONFIG_RTC_DRV_M48T86 is not set
# CONFIG_RTC_DRV_TEST is not set
# CONFIG_RTC_DRV_V3020 is not set

#
# DMA Engine support
#
# CONFIG_DMA_ENGINE is not set

#
# DMA Clients
#

#
# DMA Devices
#

#
# Firmware Drivers
#
# CONFIG_EDD is not set
# CONFIG_DELL_RBU is not set
# CONFIG_DCDBAS is not set

#
# File systems
#
CONFIG_EXT2_FS=y
CONFIG_EXT2_FS_XATTR=y
CONFIG_EXT2_FS_POSIX_ACL=y
CONFIG_EXT2_FS_SECURITY=y
# CONFIG_EXT2_FS_XIP is not set
CONFIG_EXT3_FS=y
CONFIG_EXT3_FS_XATTR=y
CONFIG_EXT3_FS_POSIX_ACL=y
CONFIG_EXT3_FS_SECURITY=y
CONFIG_JBD=y
# CONFIG_JBD_DEBUG is not set
CONFIG_FS_MBCACHE=y
CONFIG_REISERFS_FS=y
# CONFIG_REISERFS_CHECK is not set
# CONFIG_REISERFS_PROC_INFO is not set
CONFIG_REISERFS_FS_XATTR=y
CONFIG_REISERFS_FS_POSIX_ACL=y
CONFIG_REISERFS_FS_SECURITY=y
CONFIG_JFS_FS=y
CONFIG_JFS_POSIX_ACL=y
CONFIG_JFS_SECURITY=y
# CONFIG_JFS_DEBUG is not set
CONFIG_JFS_STATISTICS=y
CONFIG_FS_POSIX_ACL=y
# CONFIG_XFS_FS is not set
# CONFIG_OCFS2_FS is not set
CONFIG_MINIX_FS=y
CONFIG_ROMFS_FS=y
CONFIG_INOTIFY=y
CONFIG_INOTIFY_USER=y
# CONFIG_QUOTA is not set
CONFIG_DNOTIFY=y
CONFIG_AUTOFS_FS=y
CONFIG_AUTOFS4_FS=y
CONFIG_FUSE_FS=y

#
# CD-ROM/DVD Filesystems
#
CONFIG_ISO9660_FS=y
CONFIG_JOLIET=y
CONFIG_ZISOFS=y
CONFIG_ZISOFS_FS=y
CONFIG_UDF_FS=y
CONFIG_UDF_NLS=y

#
# DOS/FAT/NT Filesystems
#
CONFIG_FAT_FS=y
CONFIG_MSDOS_FS=y
CONFIG_VFAT_FS=y
CONFIG_FAT_DEFAULT_CODEPAGE=437
CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
CONFIG_NTFS_FS=y
# CONFIG_NTFS_DEBUG is not set
CONFIG_NTFS_RW=y

#
# Pseudo filesystems
#
CONFIG_PROC_FS=y
CONFIG_PROC_KCORE=y
CONFIG_PROC_SYSCTL=y
CONFIG_SYSFS=y
CONFIG_TMPFS=y
# CONFIG_TMPFS_POSIX_ACL is not set
# CONFIG_HUGETLBFS is not set
# CONFIG_HUGETLB_PAGE is not set
CONFIG_RAMFS=y
CONFIG_CONFIGFS_FS=y

#
# Miscellaneous filesystems
#
# CONFIG_ADFS_FS is not set
# CONFIG_AFFS_FS is not set
# CONFIG_HFS_FS is not set
# CONFIG_HFSPLUS_FS is not set
# CONFIG_BEFS_FS is not set
# CONFIG_BFS_FS is not set
# CONFIG_EFS_FS is not set
CONFIG_CRAMFS=y
# CONFIG_VXFS_FS is not set
# CONFIG_HPFS_FS is not set
# CONFIG_QNX4FS_FS is not set
# CONFIG_SYSV_FS is not set
# CONFIG_UFS_FS is not set

#
# Network File Systems
#
CONFIG_NFS_FS=y
CONFIG_NFS_V3=y
# CONFIG_NFS_V3_ACL is not set
CONFIG_NFS_V4=y
CONFIG_NFS_DIRECTIO=y
CONFIG_NFSD=y
CONFIG_NFSD_V3=y
# CONFIG_NFSD_V3_ACL is not set
CONFIG_NFSD_V4=y
CONFIG_NFSD_TCP=y
# CONFIG_ROOT_NFS is not set
CONFIG_LOCKD=y
CONFIG_LOCKD_V4=y
CONFIG_EXPORTFS=y
CONFIG_NFS_COMMON=y
CONFIG_SUNRPC=y
CONFIG_SUNRPC_GSS=y
CONFIG_RPCSEC_GSS_KRB5=y
CONFIG_RPCSEC_GSS_SPKM3=y
CONFIG_SMB_FS=y
# CONFIG_SMB_NLS_DEFAULT is not set
# CONFIG_CIFS is not set
# CONFIG_NCP_FS is not set
# CONFIG_CODA_FS is not set
# CONFIG_AFS_FS is not set
# CONFIG_9P_FS is not set

#
# Partition Types
#
CONFIG_PARTITION_ADVANCED=y
CONFIG_ACORN_PARTITION=y
# CONFIG_ACORN_PARTITION_CUMANA is not set
# CONFIG_ACORN_PARTITION_EESOX is not set
CONFIG_ACORN_PARTITION_ICS=y
# CONFIG_ACORN_PARTITION_ADFS is not set
# CONFIG_ACORN_PARTITION_POWERTEC is not set
CONFIG_ACORN_PARTITION_RISCIX=y
CONFIG_OSF_PARTITION=y
CONFIG_AMIGA_PARTITION=y
CONFIG_ATARI_PARTITION=y
CONFIG_MAC_PARTITION=y
CONFIG_MSDOS_PARTITION=y
CONFIG_BSD_DISKLABEL=y
CONFIG_MINIX_SUBPARTITION=y
CONFIG_SOLARIS_X86_PARTITION=y
CONFIG_UNIXWARE_DISKLABEL=y
CONFIG_LDM_PARTITION=y
# CONFIG_LDM_DEBUG is not set
CONFIG_SGI_PARTITION=y
CONFIG_ULTRIX_PARTITION=y
CONFIG_SUN_PARTITION=y
# CONFIG_KARMA_PARTITION is not set
CONFIG_EFI_PARTITION=y

#
# Native Language Support
#
CONFIG_NLS=y
CONFIG_NLS_DEFAULT="cp437"
# CONFIG_NLS_CODEPAGE_437 is not set
# CONFIG_NLS_CODEPAGE_737 is not set
# CONFIG_NLS_CODEPAGE_775 is not set
# CONFIG_NLS_CODEPAGE_850 is not set
# CONFIG_NLS_CODEPAGE_852 is not set
# CONFIG_NLS_CODEPAGE_855 is not set
# CONFIG_NLS_CODEPAGE_857 is not set
# CONFIG_NLS_CODEPAGE_860 is not set
# CONFIG_NLS_CODEPAGE_861 is not set
# CONFIG_NLS_CODEPAGE_862 is not set
# CONFIG_NLS_CODEPAGE_863 is not set
# CONFIG_NLS_CODEPAGE_864 is not set
# CONFIG_NLS_CODEPAGE_865 is not set
# CONFIG_NLS_CODEPAGE_866 is not set
# CONFIG_NLS_CODEPAGE_869 is not set
# CONFIG_NLS_CODEPAGE_936 is not set
# CONFIG_NLS_CODEPAGE_950 is not set
# CONFIG_NLS_CODEPAGE_932 is not set
# CONFIG_NLS_CODEPAGE_949 is not set
# CONFIG_NLS_CODEPAGE_874 is not set
# CONFIG_NLS_ISO8859_8 is not set
# CONFIG_NLS_CODEPAGE_1250 is not set
# CONFIG_NLS_CODEPAGE_1251 is not set
CONFIG_NLS_ASCII=y
CONFIG_NLS_ISO8859_1=y
# CONFIG_NLS_ISO8859_2 is not set
# CONFIG_NLS_ISO8859_3 is not set
# CONFIG_NLS_ISO8859_4 is not set
# CONFIG_NLS_ISO8859_5 is not set
# CONFIG_NLS_ISO8859_6 is not set
# CONFIG_NLS_ISO8859_7 is not set
# CONFIG_NLS_ISO8859_9 is not set
# CONFIG_NLS_ISO8859_13 is not set
# CONFIG_NLS_ISO8859_14 is not set
# CONFIG_NLS_ISO8859_15 is not set
# CONFIG_NLS_KOI8_R is not set
# CONFIG_NLS_KOI8_U is not set
CONFIG_NLS_UTF8=m

#
# Instrumentation Support
#
# CONFIG_PROFILING is not set
# CONFIG_KPROBES is not set

#
# Kernel hacking
#
CONFIG_TRACE_IRQFLAGS_SUPPORT=y
CONFIG_PRINTK_TIME=y
CONFIG_ENABLE_MUST_CHECK=y
CONFIG_MAGIC_SYSRQ=y
CONFIG_UNUSED_SYMBOLS=y
CONFIG_DEBUG_KERNEL=y
CONFIG_LOG_BUF_SHIFT=15
CONFIG_DETECT_SOFTLOCKUP=y
# CONFIG_SCHEDSTATS is not set
# CONFIG_DEBUG_SLAB is not set
CONFIG_DEBUG_PREEMPT=y
# CONFIG_DEBUG_RT_MUTEXES is not set
# CONFIG_RT_MUTEX_TESTER is not set
# CONFIG_DEBUG_SPINLOCK is not set
# CONFIG_DEBUG_MUTEXES is not set
# CONFIG_DEBUG_RWSEMS is not set
# CONFIG_DEBUG_LOCK_ALLOC is not set
# CONFIG_PROVE_LOCKING is not set
# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
# CONFIG_DEBUG_KOBJECT is not set
CONFIG_DEBUG_INFO=y
CONFIG_DEBUG_FS=y
# CONFIG_DEBUG_VM is not set
# CONFIG_DEBUG_LIST is not set
CONFIG_FRAME_POINTER=y
CONFIG_UNWIND_INFO=y
CONFIG_STACK_UNWIND=y
CONFIG_FORCED_INLINING=y
# CONFIG_RCU_TORTURE_TEST is not set
# CONFIG_DEBUG_RODATA is not set
# CONFIG_IOMMU_DEBUG is not set
# CONFIG_DEBUG_STACKOVERFLOW is not set
# CONFIG_DEBUG_STACK_USAGE is not set

#
# Security options
#
# CONFIG_KEYS is not set
# CONFIG_SECURITY is not set

#
# Cryptographic options
#
CONFIG_CRYPTO=y
CONFIG_CRYPTO_ALGAPI=y
CONFIG_CRYPTO_BLKCIPHER=y
CONFIG_CRYPTO_HASH=y
CONFIG_CRYPTO_MANAGER=y
CONFIG_CRYPTO_HMAC=y
CONFIG_CRYPTO_NULL=y
CONFIG_CRYPTO_MD4=y
CONFIG_CRYPTO_MD5=y
CONFIG_CRYPTO_SHA1=y
CONFIG_CRYPTO_SHA256=y
CONFIG_CRYPTO_SHA512=y
CONFIG_CRYPTO_WP512=y
CONFIG_CRYPTO_TGR192=y
CONFIG_CRYPTO_ECB=y
CONFIG_CRYPTO_CBC=y
CONFIG_CRYPTO_DES=y
CONFIG_CRYPTO_BLOWFISH=y
CONFIG_CRYPTO_TWOFISH=y
CONFIG_CRYPTO_TWOFISH_COMMON=y
# CONFIG_CRYPTO_TWOFISH_X86_64 is not set
CONFIG_CRYPTO_SERPENT=y
CONFIG_CRYPTO_AES=y
CONFIG_CRYPTO_AES_X86_64=y
CONFIG_CRYPTO_CAST5=y
CONFIG_CRYPTO_CAST6=y
CONFIG_CRYPTO_TEA=y
CONFIG_CRYPTO_ARC4=y
CONFIG_CRYPTO_KHAZAD=y
CONFIG_CRYPTO_ANUBIS=y
CONFIG_CRYPTO_DEFLATE=y
CONFIG_CRYPTO_MICHAEL_MIC=y
CONFIG_CRYPTO_CRC32C=y
# CONFIG_CRYPTO_TEST is not set

#
# Hardware crypto devices
#

#
# Library routines
#
CONFIG_CRC_CCITT=y
CONFIG_CRC16=y
CONFIG_CRC32=y
CONFIG_LIBCRC32C=y
CONFIG_ZLIB_INFLATE=y
CONFIG_ZLIB_DEFLATE=y
CONFIG_TEXTSEARCH=y
CONFIG_TEXTSEARCH_KMP=m
CONFIG_PLIST=y


Attachments:
config (32.09 kB)

2006-10-02 09:54:14

by Andi Kleen

[permalink] [raw]
Subject: Re: PCI: BIOS Bug: MCFG area at f0000000 is not E820-reserved with 2.6.18 kernel

Wink Saville <[email protected]> writes:

> I'm trying to build the 2.6.18 kernel for a Intel Core 2 Duo 2.4GHZ in
> a Asus P5W DH Deluxe Motherboard which has a 975 chip set. It does
> work when booting from a 2.6.15-27 kernel installed from Ubuntu 2.06
> LTS.
>
> When failing I get three messages on the screen:
>
> PCI: BIOS Bug: MCFG area at f0000000 is not E820-reserved
> PCI: Not using MMCONFIG
> Intel-rng: FWH not detected

Can you boot with initcall_debug and report the complete output?

-Andi

2006-10-02 15:10:51

by Wink Saville

[permalink] [raw]
Subject: Re: PCI: BIOS Bug: MCFG area at f0000000 is not E820-reserved with 2.6.18 kernel

[ 0.000000] Linux version 2.6.18-w3 (wink@winkc2d1) (gcc version 4.0.3 (Ubuntu 4.0.3-1ubuntu5)) #1 SMP PREEMPT Sun Oct 1 12:23:45 PDT 2006
[ 0.000000] Command line: root=/dev/sda2 ro quiet splash initcall_debug console=ttyS0,115200n8 loglevel=7
[ 0.000000] BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
[ 0.000000] BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
[ 0.000000] BIOS-e820: 00000000000e4000 - 0000000000100000 (reserved)
[ 0.000000] BIOS-e820: 0000000000100000 - 000000007ff80000 (usable)
[ 0.000000] BIOS-e820: 000000007ff80000 - 000000007ff8e000 (ACPI data)
[ 0.000000] BIOS-e820: 000000007ff8e000 - 000000007ffe0000 (ACPI NVS)
[ 0.000000] BIOS-e820: 000000007ffe0000 - 0000000080000000 (reserved)
[ 0.000000] BIOS-e820: 00000000ffb00000 - 0000000100000000 (reserved)
[ 0.000000] end_pfn_map = 1048576
[ 0.000000] DMI 2.3 present.
[ 0.000000] Zone PFN ranges:
[ 0.000000] DMA 0 -> 4096
[ 0.000000] DMA32 4096 -> 1048576
[ 0.000000] Normal 1048576 -> 1048576
[ 0.000000] early_node_map[2] active PFN ranges
[ 0.000000] 0: 0 -> 159
[ 0.000000] 0: 256 -> 524160
[ 0.000000] ACPI: PM-Timer IO Port: 0x808
[ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
[ 0.000000] Processor #0 (Bootup-CPU)
[ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled)
[ 0.000000] Processor #1
[ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x82] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x83] disabled)
[ 0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
[ 0.000000] IOAPIC[0]: apic_id 2, address 0xfec00000, GSI 0-23
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[ 0.000000] Setting APIC routing to flat
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] Nosave address range: 000000000009f000 - 00000000000a0000
[ 0.000000] Nosave address range: 00000000000a0000 - 00000000000e4000
[ 0.000000] Nosave address range: 00000000000e4000 - 0000000000100000
[ 0.000000] Allocating PCI resources starting at 88000000 (gap: 80000000:7fb00000)
[ 0.000000] PERCPU: Allocating 31616 bytes of per cpu data
[ 0.000000] Built 1 zonelists. Total pages: 515219
[ 0.000000] Kernel command line: root=/dev/sda2 ro quiet splash initcall_debug console=ttyS0,115200n8 loglevel=7
[ 0.000000] Initializing CPU#0
[ 0.000000] PID hash table entries: 4096 (order: 12, 32768 bytes)
[ 84.420383] Console: colour VGA+ 80x25
[ 84.674982] Dentry cache hash table entries: 262144 (order: 9, 2097152 bytes)
[ 84.683050] Inode-cache hash table entries: 131072 (order: 8, 1048576 bytes)
[ 84.690219] Checking aperture...
[ 84.714386] Memory: 2057540k/2096640k available (4269k kernel code, 38684k reserved, 1554k data, 260k init)
[ 84.783517] Calibrating delay using timer specific routine.. 4810.18 BogoMIPS (lpj=2405092)
[ 84.791908] Mount-cache hash table entries: 256
[ 84.796532] CPU: L1 I cache: 32K, L1 D cache: 32K
[ 84.801248] CPU: L2 cache: 4096K
[ 84.804474] using mwait in idle threads.
[ 84.808392] CPU: Physical Processor ID: 0
[ 84.812395] CPU: Processor Core ID: 0
[ 84.816057] CPU0: Thermal monitoring enabled (TM2)
[ 84.820844] Freeing SMP alternatives: 36k freed
[ 84.825382] ACPI: Core revision 20060707
[ 84.855783] Using local APIC timer interrupts.
[ 84.901726] result 16695787
[ 84.904513] Detected 16.695 MHz APIC timer.
[ 84.909286] Booting processor 1/2 APIC 0x1
[ 84.923894] Initializing CPU#1
[ 85.000999] Calibrating delay using timer specific routine.. 6517.75 BogoMIPS (lpj=3258877)
[ 85.001005] CPU: L1 I cache: 32K, L1 D cache: 32K
[ 85.001006] CPU: L2 cache: 4096K
[ 85.001008] CPU: Physical Processor ID: 0
[ 85.001009] CPU: Processor Core ID: 1
[ 85.001014] CPU1: Thermal monitoring enabled (TM2)
[ 85.001424] Intel(R) Core(TM)2 CPU 6600 @ 2.40GHz stepping 06
[ 85.002012] Brought up 2 CPUs
[ 85.043275] testing NMI watchdog ... OK.
[ 85.057199] time.c: Using 3.579545 MHz WALL PM GTOD PIT/TSC timer.
[ 85.063364] time.c: Detected 2404.196 MHz processor.
[ 85.201853] migration_cost=21
[ 85.205085] Calling initcall 0xffffffff807cfe40: cpufreq_tsc+0x0/0x70()
[ 85.211721] Calling initcall 0xffffffff807d4980: init_smp_flush+0x0/0x70()
[ 85.219063] Calling initcall 0xffffffff807dc760: init_elf32_binfmt+0x0/0x10()
[ 85.226230] Calling initcall 0xffffffff807de210: helper_init+0x0/0x40()
[ 85.232869] Calling initcall 0xffffffff807de5c0: pm_init+0x0/0x40()
[ 85.239162] Calling initcall 0xffffffff807de690: ksysfs_init+0x0/0x40()
[ 85.245804] Calling initcall 0xffffffff807e10b0: filelock_init+0x0/0x40()
[ 85.252621] Calling initcall 0xffffffff807e1d30: init_misc_binfmt+0x0/0x40()
[ 85.259689] Calling initcall 0xffffffff807e1d70: init_script_binfmt+0x0/0x10()
[ 85.266935] Calling initcall 0xffffffff807e1d80: init_elf_binfmt+0x0/0x10()
[ 85.273913] Calling initcall 0xffffffff807e35e0: debugfs_init+0x0/0x50()
[ 85.280643] Calling initcall 0xffffffff807ef670: sock_init+0x0/0x70()<7>Losing some ticks... checking if CPU frequency changed.
[ 85.292121]
[ 85.293630] Calling initcall 0xffffffff807f01d0: netlink_proto_init+0x0/0x190()
[ 85.300958] NET: Registered protocol family 16
[ 85.305397] Calling initcall 0xffffffff807e4380: kobject_uevent_init+0x0/0x40()
[ 85.312724] Calling initcall 0xffffffff807e4500: pcibus_class_init+0x0/0x10()
[ 85.319886] Calling initcall 0xffffffff807e4e50: pci_driver_init+0x0/0x10()
[ 85.326878] Calling initcall 0xffffffff807e5990: lcd_class_init+0x0/0x10()
[ 85.333773] Calling initcall 0xffffffff807e59a0: backlight_class_init+0x0/0x10()
[ 85.341194] Calling initcall 0xffffffff807e7861: dock_init+0x0/0x46()
[ 85.347715] Calling initcall 0xffffffff807e89a0: tty_class_init+0x0/0x30()
[ 85.354623] Calling initcall 0xffffffff807e91c0: vtconsole_class_init+0x0/0xd0()
[ 85.362081] Calling initcall 0xffffffff807d37f0: mtrr_if_init+0x0/0x80()
[ 85.368805] Calling initcall 0xffffffff807e54b0: acpi_pci_init+0x0/0x40()
[ 85.375628] ACPI: bus type pci registered
[ 85.379631] Calling initcall 0xffffffff807e710d: init_acpi_device_notify+0x0/0x48()
[ 85.387310] Calling initcall 0xffffffff807ee6e0: pci_access_init+0x0/0x30()
[ 85.394294] PCI: BIOS Bug: MCFG area at f0000000 is not E820-reserved
[ 85.400714] PCI: Not using MMCONFIG.
[ 85.404277] PCI: Using configuration type 1
[ 85.408456] Calling initcall 0xffffffff807d3640: mtrr_init_finialize+0x0/0x40()
[ 85.415786] Calling initcall 0xffffffff807daaf0: topology_init+0x0/0x40()
[ 85.422625] Calling initcall 0xffffffff807ddf70: param_sysfs_init+0x0/0x210()
[ 85.430776] Calling initcall 0xffffffff807e18d0: init_bio+0x0/0x110()
[ 85.437285] Calling initcall 0xffffffff807e4200: genhd_device_init+0x0/0x60()
[ 85.444485] Calling initcall 0xffffffff807e54f0: fbmem_init+0x0/0xa0()
[ 85.451043] Calling initcall 0xffffffff807e6f25: acpi_init+0x0/0x1e8()
[ 85.464257] ACPI: Interpreter enabled
[ 85.467917] ACPI: Using IOAPIC for interrupt routing
[ 85.473282] Calling initcall 0xffffffff807e7236: acpi_ec_init+0x0/0x5e()
[ 85.480007] Calling initcall 0xffffffff807e7b1e: acpi_pci_root_init+0x0/0x27()
[ 85.487251] Calling initcall 0xffffffff807e7c0a: acpi_pci_link_init+0x0/0x46()
[ 85.494489] Calling initcall 0xffffffff807e7cea: acpi_power_init+0x0/0x76()
[ 85.501475] Calling initcall 0xffffffff807e7e3c: acpi_system_init+0x0/0xc3()
[ 85.508542] Calling initcall 0xffffffff807e7eff: acpi_event_init+0x0/0x3e()
[ 85.515529] Calling initcall 0xffffffff807e7f3d: acpi_scan_init+0x0/0x1a4()
[ 85.523211] ACPI: PCI Root Bridge [PCI0] (0000:00)
[ 85.529604] PCI: Ignoring BAR0-3 of IDE controller 0000:00:1f.1
[ 85.536141] PCI: Transparent bridge - 0000:00:1e.0
[ 85.547106] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 *10 11 12 14 15)
[ 85.554558] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 *7 10 11 12 14 15)
[ 85.561985] ACPI: PCI Interrupt Link [LNKC] (IRQs *3 4 5 6 7 10 11 12 14 15)
[ 85.569429] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 10 *11 12 14 15)
[ 85.576859] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 *5 6 7 10 11 12 14 15)
[ 85.584304] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 *10 11 12 14 15)
[ 85.591750] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
[ 85.600344] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 *6 7 10 11 12 14 15)
[ 85.607687] Calling initcall 0xffffffff807e8254: acpi_cm_sbs_init+0x0/0xc()
[ 85.614682] Calling initcall 0xffffffff807e8260: pnp_init+0x0/0x30()
[ 85.621063] Linux Plug and Play Support v0.97 (c) Adam Belay
[ 85.626706] Calling initcall 0xffffffff807e8420: pnpacpi_init+0x0/0x70()
[ 85.633421] pnp: PnP ACPI init
[ 85.638555] pnp: PnP ACPI: found 13 devices
[ 85.642727] Calling initcall 0xffffffff807e8e80: misc_init+0x0/0x90()
[ 85.649207] Calling initcall 0xffffffff807e9720: mod_init+0x0/0x280()
[ 85.657054] intel_rng: FWH not detected
[ 85.660894] Calling initcall 0xffffffff807e99a0: mod_init+0x0/0xc0()
[ 85.667283] Calling initcall 0xffffffff807e9a60: mod_init+0x0/0xc0()
[ 85.673663] Calling initcall 0xffffffff804bdda0: cn_init+0x0/0xe0()
[ 85.679992] Calling initcall 0xffffffff807ec270: init_scsi+0x0/0x90()
[ 85.686569] SCSI subsystem initialized
[ 85.690306] Calling initcall 0xffffffff807ec9c0: init_pcmcia_cs+0x0/0x50()
[ 85.697208] Calling initcall 0xffffffff807ecb00: usb_init+0x0/0x110()
[ 85.703725] usbcore: registered new interface driver usbfs
[ 85.709216] usbcore: registered new interface driver hub
[ 85.714538] usbcore: registered new device driver usb
[ 85.719579] Calling initcall 0xffffffff807eced0: serio_init+0x0/0xf0()
[ 85.726579] Calling initcall 0xffffffff807ed350: gameport_init+0x0/0xe0()
[ 85.733403] Calling initcall 0xffffffff807ed430: input_init+0x0/0x120()
[ 85.740050] Calling initcall 0xffffffff807ed850: rtc_init+0x0/0x50()
[ 85.746438] Calling initcall 0xffffffff807ed8a0: i2c_init+0x0/0x40()
[ 85.752850] Calling initcall 0xffffffff807ee710: pci_acpi_init+0x0/0xb0()
[ 85.759659] PCI: Using ACPI for IRQ routing
[ 85.763828] PCI: If a device doesn't work, try "pci=routeirq". If it helps, post a report
[ 85.772070] Calling initcall 0xffffffff807ee7c0: pci_legacy_init+0x0/0x130()
[ 85.779141] Calling initcall 0xffffffff807eed80: pcibios_irq_init+0x0/0x540()
[ 85.786295] Calling initcall 0xffffffff807ef2c0: pcibios_init+0x0/0x70()
[ 85.793075] Calling initcall 0xffffffff807ef740: proto_init+0x0/0x40()
[ 85.799627] Calling initcall 0xffffffff807ef8e0: net_dev_init+0x0/0x210()
[ 85.806448] Calling initcall 0xffffffff807f01c0: fib_rules_init+0x0/0x10()
[ 85.813335] Calling initcall 0xffffffff807f0360: genl_init+0x0/0xb0()
[ 85.819808] Calling initcall 0xffffffff807cff40: late_hpet_init+0x0/0xb0()
[ 85.826703] Calling initcall 0xffffffff807d3070: pci_iommu_init+0x0/0x20()
[ 85.833603] PCI-GART: No AMD northbridge found.
[ 85.838118] Calling initcall 0xffffffff807e1030: init_pipe_fs+0x0/0x50()
[ 85.844849] Calling initcall 0xffffffff807e8121: acpi_motherboard_init+0x0/0x133()
[ 85.852979] Calling initcall 0xffffffff807e8390: pnp_system_init+0x0/0x10()
[ 85.859987] pnp: 00:06: ioport range 0x290-0x297 has been reserved
[ 85.866162] Calling initcall 0xffffffff807e8880: chr_dev_init+0x0/0x90()
[ 85.873036] Calling initcall 0xffffffff807eacd0: firmware_class_init+0x0/0x80()
[ 85.880364] Calling initcall 0xffffffff807eca10: init_pcmcia_bus+0x0/0x50()
[ 85.887346] Calling initcall 0xffffffff807eda00: cpufreq_gov_performance_init+0x0/0x10()
[ 85.895453] Calling initcall 0xffffffff807eda20: cpufreq_gov_userspace_init+0x0/0x30()
[ 85.903391] Calling initcall 0xffffffff807ee0f0: pcibios_assign_resources+0x0/0x90()
[ 85.911172] PCI: Bridge: 0000:00:01.0
[ 85.914824] IO window: c000-cfff
[ 85.918224] MEM window: faa00000-feafffff
[ 85.922400] PREFETCH window: cff00000-efefffff
[ 85.927009] PCI: Bridge: 0000:00:1c.0
[ 85.930666] IO window: disabled.
[ 85.934066] MEM window: disabled.
[ 85.937551] PREFETCH window: cfe00000-cfefffff
[ 85.942161] PCI: Bridge: 0000:00:1c.3
[ 85.945818] IO window: b000-bfff
[ 85.949217] MEM window: fa900000-fa9fffff
[ 85.953393] PREFETCH window: disabled.
[ 85.957310] PCI: Bridge: 0000:00:1c.4
[ 85.960969] IO window: a000-afff
[ 85.964367] MEM window: fa800000-fa8fffff
[ 85.968543] PREFETCH window: disabled.
[ 85.972463] PCI: Bridge: 0000:00:1e.0
[ 85.976118] IO window: disabled.
[ 85.979969] MEM window: fa700000-fa7fffff
[ 85.984144] PREFETCH window: disabled.
[ 85.988073] GSI 16 sharing vector 0xA9 and IRQ 16
[ 85.992766] ACPI: PCI Interrupt 0000:00:01.0[A] -> GSI 16 (level, low) -> IRQ 169
[ 86.000268] ACPI: PCI Interrupt 0000:00:1c.0[A] -> GSI 16 (level, low) -> IRQ 169
[ 86.007767] GSI 17 sharing vector 0xB1 and IRQ 17
[ 86.012455] ACPI: PCI Interrupt 0000:00:1c.3[D] -> GSI 19 (level, low) -> IRQ 177
[ 86.019951] ACPI: PCI Interrupt 0000:00:1c.4[A] -> GSI 16 (level, low) -> IRQ 169
[ 86.027436] Calling initcall 0xffffffff807f0eb0: inet_init+0x0/0x3e0()
[ 86.034001] NET: Registered protocol family 2
[ 86.046931] IP route cache hash table entries: 65536 (order: 7, 524288 bytes)
[ 86.054152] TCP established hash table entries: 262144 (order: 10, 4194304 bytes)
[ 86.063143] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
[ 86.070376] TCP: Hash tables configured (established 262144 bind 65536)
[ 86.076975] TCP reno registered
[ 86.080154] Calling initcall 0xffffffff8020e040: time_init_device+0x0/0x30()
[ 86.087287] Calling initcall 0xffffffff807d04b0: add_pcspkr+0x0/0x60()
[ 86.093868] Calling initcall 0xffffffff807d1390: init_timer_sysfs+0x0/0x30()
[ 86.100956] Calling initcall 0xffffffff807d1360: i8259A_init_sysfs+0x0/0x30()
[ 86.108141] Calling initcall 0xffffffff807d18c0: vsyscall_init+0x0/0xb0()
[ 86.114960] Calling initcall 0xffffffff807d1fd0: sbf_init+0x0/0xe0()
[ 86.121336] Calling initcall 0xffffffff807d2e00: i8237A_init_sysfs+0x0/0x30()
[ 86.128522] Calling initcall 0xffffffff807d32c0: mce_init_device+0x0/0x1b0()
[ 86.135661] Calling initcall 0xffffffff807d31c0: periodic_mcheck_init+0x0/0x30()
[ 86.143077] Calling initcall 0xffffffff807d34e0: thermal_throttle_init_device+0x0/0x60()
[ 86.151194] Calling initcall 0xffffffff807d4680: msr_init+0x0/0x130()
[ 86.157696] Calling initcall 0xffffffff807d47b0: microcode_init+0x0/0xa0()
[ 106.118228] IA-32 Microcode Update Driver: v1.14a <[email protected]>
[ 106.124743] Calling initcall 0xffffffff807d4850: cpuid_init+0x0/0x130()
[ 106.131417] Calling initcall 0xffffffff807d5c70: init_lapic_sysfs+0x0/0x40()
[ 106.138516] Calling initcall 0xffffffff807d6b30: ioapic_init_sysfs+0x0/0xf0()
[ 106.145694] Calling initcall 0xffffffff807db670: cache_sysfs_init+0x0/0x60()
[ 106.152913] Calling initcall 0xffffffff807db990: x8664_sysctl_init+0x0/0x20()
[ 106.160456] Calling initcall 0xffffffff807dc430: aes_init+0x0/0x330()
[ 106.166942] Calling initcall 0xffffffff807dc770: ia32_binfmt_init+0x0/0x20()
[ 106.174017] Calling initcall 0xffffffff807dc790: init_syscall32+0x0/0x80()
[ 106.180928] Calling initcall 0xffffffff807dc810: init_aout_binfmt+0x0/0x10()
[ 106.188008] Calling initcall 0xffffffff807dd300: create_proc_profile+0x0/0x2c0()
[ 106.195427] Calling initcall 0xffffffff807dd770: ioresources_init+0x0/0x50()
[ 106.202501] Calling initcall 0xffffffff807dd8e0: timekeeping_init_device+0x0/0x30()
[ 106.210206] Calling initcall 0xffffffff807ddb60: uid_cache_init+0x0/0x90()
[ 106.217115] Calling initcall 0xffffffff807de180: init_posix_timers+0x0/0x90()
[ 106.224279] Calling initcall 0xffffffff807de250: init_posix_cpu_timers+0x0/0x80()
[ 106.231790] Calling initcall 0xffffffff807de360: latency_init+0x0/0x30()
[ 106.238510] Calling initcall 0xffffffff807de3a0: init_clocksource_sysfs+0x0/0x60()
[ 106.246127] Calling initcall 0xffffffff807de4b0: init_jiffies_clocksource+0x0/0x10()
[ 106.253885] Calling initcall 0xffffffff807de4c0: init+0x0/0x90()
[ 106.259931] Calling initcall 0xffffffff807de550: proc_dma_init+0x0/0x30()
[ 106.266753] Calling initcall 0xffffffff8024ff30: percpu_modinit+0x0/0x80()
[ 106.273653] Calling initcall 0xffffffff807de590: kallsyms_init+0x0/0x30()
[ 106.280459] Calling initcall 0xffffffff807de600: crash_notes_memory_init+0x0/0x50()
[ 106.288138] Calling initcall 0xffffffff807de650: ikconfig_init+0x0/0x40()
[ 106.294953] Calling initcall 0xffffffff807dfc40: init_per_zone_pages_min+0x0/0x50()
[ 106.302642] Calling initcall 0xffffffff807e0710: pdflush_init+0x0/0x20()
[ 106.309386] Calling initcall 0xffffffff807e0750: kswapd_init+0x0/0x20()
[ 106.316042] Calling initcall 0xffffffff807e0770: setup_vmstat+0x0/0x20()
[ 106.322763] Calling initcall 0xffffffff807e0810: procswaps_init+0x0/0x30()
[ 106.329664] Calling initcall 0xffffffff807e0840: init_tmpfs+0x0/0xd0()
[ 106.336236] Calling initcall 0xffffffff807e0910: cpucache_init+0x0/0x40()
[ 106.343051] Calling initcall 0xffffffff807e1080: fasync_init+0x0/0x30()
[ 106.349696] Calling initcall 0xffffffff807e1800: aio_setup+0x0/0x70()
[ 106.356188] Calling initcall 0xffffffff807e1a70: inotify_setup+0x0/0x10()
[ 106.363000] Calling initcall 0xffffffff807e1a80: inotify_user_setup+0x0/0xc0()
[ 106.370257] Calling initcall 0xffffffff807e1b40: eventpoll_init+0x0/0xf0()
[ 106.377164] Calling initcall 0xffffffff807e1c30: init_sys32_ioctl+0x0/0x100()
[ 106.384330] Calling initcall 0xffffffff807e1d90: init_mbcache+0x0/0x30()
[ 106.391053] Calling initcall 0xffffffff807e1dc0: dnotify_init+0x0/0x30()
[ 106.397783] Calling initcall 0xffffffff807e2260: configfs_init+0x0/0xa0()
[ 106.404602] Calling initcall 0xffffffff807e2300: init_devpts_fs+0x0/0x40()
[ 106.411510] Calling initcall 0xffffffff807e2340: init_reiserfs_fs+0x0/0xa0()
[ 106.419041] Calling initcall 0xffffffff807e2510: init_ext3_fs+0x0/0x70()
[ 106.425782] Calling initcall 0xffffffff807e2640: journal_init+0x0/0xd0()
[ 106.432514] Calling initcall 0xffffffff807e2710: init_ext2_fs+0x0/0x70()
[ 106.439253] Calling initcall 0xffffffff807e27c0: init_cramfs_fs+0x0/0x30()
[ 106.446161] Calling initcall 0xffffffff807e27f0: init_ramfs_fs+0x0/0x10()
[ 106.452961] Calling initcall 0xffffffff807e2810: init_minix_fs+0x0/0x60()
[ 106.459769] Calling initcall 0xffffffff807e28b0: init_fat_fs+0x0/0x50()
[ 106.466415] Calling initcall 0xffffffff807e2900: init_msdos_fs+0x0/0x10()
[ 106.473232] Calling initcall 0xffffffff807e2910: init_vfat_fs+0x0/0x10()
[ 106.479959] Calling initcall 0xffffffff807e2920: init_iso9660_fs+0x0/0x70()
[ 106.486950] Calling initcall 0xffffffff807e2ae0: init_nfs_fs+0x0/0xd0()
[ 106.493628] Calling initcall 0xffffffff807e2da0: init_nfsd+0x0/0xb0()
[ 106.500090] Installing knfsd (copyright (C) 1996 [email protected]).
[ 106.506545] Calling initcall 0xffffffff807e2e50: init_nlm+0x0/0x30()
[ 106.512935] Calling initcall 0xffffffff807e2e80: init_nls_ascii+0x0/0x10()
[ 106.519843] Calling initcall 0xffffffff807e2e90: init_nls_iso8859_1+0x0/0x10()
[ 106.527088] Calling initcall 0xffffffff807e2ea0: init_smb_fs+0x0/0x70()
[ 106.533728] Calling initcall 0xffffffff807e2f10: init_ntfs_fs+0x0/0x1e0()
[ 106.540536] NTFS driver 2.1.27 [Flags: R/W].
[ 106.544813] Calling initcall 0xffffffff807e30f0: init_romfs_fs+0x0/0x60()
[ 106.551625] Calling initcall 0xffffffff807e3150: init_autofs_fs+0x0/0x10()
[ 106.558523] Calling initcall 0xffffffff807e3160: init_autofs4_fs+0x0/0x10()
[ 106.565501] initcall at 0xffffffff807e3160: init_autofs4_fs+0x0/0x10(): returned with error code -16
[ 106.574650] Calling initcall 0xffffffff807e31c0: fuse_init+0x0/0x120()
[ 106.581213] fuse init (API version 7.7)
[ 106.585067] Calling initcall 0xffffffff807e32f0: init_udf_fs+0x0/0x60()
[ 106.591716] Calling initcall 0xffffffff807e3350: init_jfs_fs+0x0/0x210()
[ 106.598459] JFS: nTxBlock = 8192, nTxLock = 65536
[ 106.606349] Calling initcall 0xffffffff807e3630: ipc_init+0x0/0x20()
[ 106.612759] Calling initcall 0xffffffff807e3890: init_mqueue_fs+0x0/0xf0()
[ 106.619700] Calling initcall 0xffffffff807e3980: crypto_algapi_init+0x0/0x10()
[ 106.626952] Calling initcall 0xffffffff807e39c0: cryptomgr_init+0x0/0x10()
[ 106.633852] Calling initcall 0xffffffff807e39d0: hmac_module_init+0x0/0x10()
[ 106.640927] Calling initcall 0xffffffff807e39e0: init+0x0/0x60()
[ 106.646973] Calling initcall 0xffffffff807e3a40: init+0x0/0x10()
[ 106.652998] Calling initcall 0xffffffff807e3a50: init+0x0/0x10()
[ 106.659035] Calling initcall 0xffffffff807e3a60: init+0x0/0x10()
[ 106.665079] Calling initcall 0xffffffff807e3a70: init+0x0/0x10()
[ 106.671590] Calling initcall 0xffffffff807e3a80: init+0x0/0x40()
[ 106.677618] Calling initcall 0xffffffff807e3ac0: init+0x0/0x70()
[ 106.683655] Calling initcall 0xffffffff807e3b30: init+0x0/0x70()
[ 106.689700] Calling initcall 0xffffffff807e3ba0: crypto_ecb_module_init+0x0/0x10()
[ 106.697300] Calling initcall 0xffffffff807e3bb0: crypto_cbc_module_init+0x0/0x10()
[ 106.704891] Calling initcall 0xffffffff807e3bc0: init+0x0/0x40()
[ 106.710921] Calling initcall 0xffffffff807e3c00: init+0x0/0x10()
[ 106.716965] Calling initcall 0xffffffff807e3c10: init+0x0/0x10()
[ 106.723009] Calling initcall 0xffffffff807e3c20: init+0x0/0x40()
[ 106.729046] Calling initcall 0xffffffff807e3c60: aes_init+0x0/0x330()
[ 106.735537] Calling initcall 0xffffffff807e3f90: init+0x0/0x10()
[ 106.741576] Calling initcall 0xffffffff807e3fa0: init+0x0/0x10()
[ 106.747620] Calling initcall 0xffffffff807e3fb0: arc4_init+0x0/0x10()
[ 106.754088] Calling initcall 0xffffffff807e3fc0: init+0x0/0x70()
[ 106.760117] Calling initcall 0xffffffff807e4030: init+0x0/0x10()
[ 106.766161] Calling initcall 0xffffffff807e4040: init+0x0/0x10()
[ 106.772197] Calling initcall 0xffffffff807e4050: init+0x0/0x10()
[ 106.778233] Calling initcall 0xffffffff807e4060: michael_mic_init+0x0/0x10()
[ 106.785306] Calling initcall 0xffffffff807e4070: init+0x0/0x10()
[ 106.791334] Calling initcall 0xffffffff807e4260: noop_init+0x0/0x10()
[ 106.797803] io scheduler noop registered
[ 106.801746] Calling initcall 0xffffffff807e4270: as_init+0x0/0x10()
[ 106.808049] io scheduler anticipatory registered (default)
[ 106.813557] Calling initcall 0xffffffff807e4280: deadline_init+0x0/0x10()
[ 106.820363] io scheduler deadline registered
[ 106.824644] Calling initcall 0xffffffff807e4290: cfq_init+0x0/0xb0()
[ 106.831024] io scheduler cfq registered
[ 106.834864] Calling initcall 0xffffffff807e4340: blk_trace_init+0x0/0x40()
[ 106.841777] Calling initcall 0xffffffff80433370: pci_init+0x0/0x30()
[ 106.850046] Calling initcall 0xffffffff807e4e60: pci_sysfs_init+0x0/0x40()
[ 106.856997] Calling initcall 0xffffffff807e4ea0: pci_proc_init+0x0/0x70()
[ 106.863827] Calling initcall 0xffffffff807e4f10: pcie_portdrv_init+0x0/0x50()
[ 106.871079] assign_interrupt_mode Found MSI capability
[ 106.876331] assign_interrupt_mode Found MSI capability
[ 106.881615] assign_interrupt_mode Found MSI capability
[ 106.886870] assign_interrupt_mode Found MSI capability
[ 106.892090] Calling initcall 0xffffffff807e4f60: aer_service_init+0x0/0x10()
[ 106.899178] Calling initcall 0xffffffff807e4f70: pci_hotplug_init+0x0/0x50()
[ 106.906252] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[ 106.911811] Calling initcall 0xffffffff807e4fc0: dummyphp_init+0x0/0x60()
[ 106.918626] fakephp: Fake PCI Hot Plug Controller Driver
[ 106.924228] Calling initcall 0xffffffff807e5020: acpiphp_init+0x0/0x50()
[ 106.930958] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
[ 106.938716] Calling initcall 0xffffffff807e5290: ibm_acpiphp_init+0x0/0x1a0()
[ 106.946009] acpiphp_ibm: ibm_find_acpi_device: Failed to get device information<3>acpiphp_ibm: ibm_find_acpi_device: Failed to get device information<3>acpiphp_ibm: ibm_find_acpi_device: Failed to get device information<3>acpiphp_ibm: ibm_acpiphp_init: acpi_walk_namespace failed
[ 106.971992] Calling initcall 0xffffffff807e58b0: fb_console_init+0x0/0xe0()
[ 106.979005] Calling initcall 0xffffffff80457f60: rivafb_init+0x0/0x160()
[ 106.985759] Calling initcall 0xffffffff80460a30: nvidiafb_init+0x0/0x240()
[ 106.992698] ACPI: PCI Interrupt 0000:05:00.0[A] -> GSI 16 (level, low) -> IRQ 169
[ 107.000200] nvidiafb: Device ID: 10de0391
[ 107.008307] nvidiafb: CRTC0 analog found
[ 107.016390] nvidiafb: CRTC1 analog not found
[ 107.042392] nvidiafb: EDID found from BUS1
[ 107.200423] nvidiafb: EDID found from BUS2
[ 107.204509] nvidiafb: CRTC 0 appears to have a CRT attached
[ 107.210067] nvidiafb: Using CRT on CRTC 0
[ 107.214820] nvidiafb: MTRR set to ON


Attachments:
winkc2d1-log-1.txt (24.59 kB)

2006-10-02 15:22:30

by Andi Kleen

[permalink] [raw]
Subject: Re: PCI: BIOS Bug: MCFG area at f0000000 is not E820-reserved with 2.6.18 kernel

On Monday 02 October 2006 17:10, Wink Saville wrote:
> Andi,
>
> Attached is the log file captured via a serial port with initcall_debug
> enabled and loglevel=7.


[ 106.985759] Calling initcall 0xffffffff80460a30: nvidiafb_init+0x0/0x240()
[ 106.992698] ACPI: PCI Interrupt 0000:05:00.0[A] -> GSI 16 (level, low) -> IRQ 169
[ 107.000200] nvidiafb: Device ID: 10de0391
[ 107.008307] nvidiafb: CRTC0 analog found
[ 107.016390] nvidiafb: CRTC1 analog not found
[ 107.042392] nvidiafb: EDID found from BUS1
[ 107.200423] nvidiafb: EDID found from BUS2
[ 107.204509] nvidiafb: CRTC 0 appears to have a CRT attached
[ 107.210067] nvidiafb: Using CRT on CRTC 0
[ 107.214820] nvidiafb: MTRR set to ON

It seems to lock up in the nvidia fb driver. Can you disable that
and if that helps contact the maintainer of it?

It might be also just the MTRR so possibly booting
with video=nvidiafb:nomtrr might help too.


> BTW, if I didn't have a serial port what other
> mechanisms are available to capture the logs if the kernel won't boot?

If you have a ieee1394 port and a cable you can use firescope
from a second box (ftp://ftp.firstfloor.org/pub/ak/firescope/)

If it crashes late enough at boot you can use ethernet netconsole
(/usr/src/linux/Documentation/networking/netconsole.txt)

Or a lot of people use a digital camera to photograph the oopses.
If you do that make sure to either use frame buffer with a small
font or CONFIG_VIDEO_SELECT=y vga=ask select smallest resolution possible,
otherwise the oopses typically don't fit on the screen.

.jpgs should be only last resort though, the other options
are definitely preferred.

-Andi

2006-10-02 16:08:26

by Wink Saville

[permalink] [raw]
Subject: Re: PCI: BIOS Bug: MCFG area at f0000000 is not E820-reserved with 2.6.18 kernel

[ 0.000000] Linux version 2.6.18-w3 (wink@winkc2d1) (gcc version 4.0.3 (Ubuntu 4.0.3-1ubuntu5)) #2 SMP PREEMPT Mon Oct 2 08:53:22 PDT 200
6
[ 0.000000] Command line: root=/dev/sda2 ro quiet splash initcall_debug console=ttyS0,115200n8 loglevel=7 video=nvidiafb:nomtrr
[ 0.000000] BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
[ 0.000000] BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
[ 0.000000] BIOS-e820: 00000000000e4000 - 0000000000100000 (reserved)
[ 0.000000] BIOS-e820: 0000000000100000 - 000000007ff80000 (usable)
[ 0.000000] BIOS-e820: 000000007ff80000 - 000000007ff8e000 (ACPI data)
[ 0.000000] BIOS-e820: 000000007ff8e000 - 000000007ffe0000 (ACPI NVS)
[ 0.000000] BIOS-e820: 000000007ffe0000 - 0000000080000000 (reserved)
[ 0.000000] BIOS-e820: 00000000ffb00000 - 0000000100000000 (reserved)
[ 0.000000] end_pfn_map = 1048576
[ 0.000000] DMI 2.3 present.
[ 0.000000] Zone PFN ranges:
[ 0.000000] DMA 0 -> 4096
[ 0.000000] DMA32 4096 -> 1048576
[ 0.000000] Normal 1048576 -> 1048576
[ 0.000000] early_node_map[2] active PFN ranges
[ 0.000000] 0: 0 -> 159
[ 0.000000] 0: 256 -> 524160
[ 0.000000] ACPI: PM-Timer IO Port: 0x808
[ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
[ 0.000000] Processor #0 (Bootup-CPU)
[ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled)
[ 0.000000] Processor #1
[ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x82] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x83] disabled)
[ 0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
[ 0.000000] IOAPIC[0]: apic_id 2, address 0xfec00000, GSI 0-23
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[ 0.000000] Setting APIC routing to flat
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] Nosave address range: 000000000009f000 - 00000000000a0000
[ 0.000000] Nosave address range: 00000000000a0000 - 00000000000e4000
[ 0.000000] Nosave address range: 00000000000e4000 - 0000000000100000
[ 0.000000] Allocating PCI resources starting at 88000000 (gap: 80000000:7fb00000)
[ 0.000000] PERCPU: Allocating 31616 bytes of per cpu data
[ 0.000000] Built 1 zonelists. Total pages: 515101
[ 0.000000] Kernel command line: root=/dev/sda2 ro quiet splash initcall_debug console=ttyS0,115200n8 loglevel=7 video=nvidiafb:nomtrr
[ 0.000000] Initializing CPU#0
[ 0.000000] PID hash table entries: 4096 (order: 12, 32768 bytes)
[ 97.450643] Console: colour VGA+ 80x25
[ 97.709058] Dentry cache hash table entries: 262144 (order: 9, 2097152 bytes)
[ 97.717127] Inode-cache hash table entries: 131072 (order: 8, 1048576 bytes)
[ 97.724293] Checking aperture...
[ 97.747964] Memory: 2057068k/2096640k available (4150k kernel code, 39156k reserved, 2159k data, 260k init)
[ 97.817763] Calibrating delay using timer specific routine.. 4810.28 BogoMIPS (lpj=2405141)
[ 97.826147] Mount-cache hash table entries: 256
[ 97.830776] CPU: L1 I cache: 32K, L1 D cache: 32K
[ 97.835496] CPU: L2 cache: 4096K
[ 97.838721] using mwait in idle threads.
[ 97.842639] CPU: Physical Processor ID: 0
[ 97.846641] CPU: Processor Core ID: 0
[ 97.850303] CPU0: Thermal monitoring enabled (TM2)
[ 97.855092] Freeing SMP alternatives: 36k freed
[ 97.859629] ACPI: Core revision 20060707
[ 97.890276] Using local APIC timer interrupts.
[ 97.936216] result 16695612
[ 97.939002] Detected 16.695 MHz APIC timer.
[ 97.943553] Booting processor 1/2 APIC 0x1
[ 97.958166] Initializing CPU#1
[ 98.028192] Calibrating delay using timer specific routine.. 4807.61 BogoMIPS (lpj=2403806)
[ 98.028198] CPU: L1 I cache: 32K, L1 D cache: 32K
[ 98.028199] CPU: L2 cache: 4096K
[ 98.028201] CPU: Physical Processor ID: 0
[ 98.028202] CPU: Processor Core ID: 1
[ 98.028207] CPU1: Thermal monitoring enabled (TM2)
[ 98.028621] Intel(R) Core(TM)2 CPU 6600 @ 2.40GHz stepping 06
[ 98.029278] Brought up 2 CPUs
[ 98.070544] testing NMI watchdog ... OK.
[ 98.084466] time.c: Using 3.579545 MHz WALL PM GTOD PIT/TSC timer.
[ 98.090632] time.c: Detected 2404.168 MHz processor.
[ 98.192225] migration_cost=21
[ 98.195459] Calling initcall 0xffffffff80847ef0: cpufreq_tsc+0x0/0x70()
[ 98.202098] Calling initcall 0xffffffff8084cca0: init_smp_flush+0x0/0x70()
[ 98.209008] Calling initcall 0xffffffff80854b90: init_elf32_binfmt+0x0/0x20()
[ 98.216176] Calling initcall 0xffffffff80856650: helper_init+0x0/0x40()
[ 98.222825] Calling initcall 0xffffffff80856a80: pm_init+0x0/0x30()
[ 98.229114] Calling initcall 0xffffffff80856b40: ksysfs_init+0x0/0x30()
[ 98.235756] Calling initcall 0xffffffff808597d0: filelock_init+0x0/0x40()
[ 98.242574] Calling initcall 0xffffffff8085a470: init_misc_binfmt+0x0/0x50()
[ 98.249643] Calling initcall 0xffffffff8085a4c0: init_script_binfmt+0x0/0x20()
[ 98.256892] Calling initcall 0xffffffff8085a4e0: init_elf_binfmt+0x0/0x20()
[ 98.264301] Calling initcall 0xffffffff8085bf10: debugfs_init+0x0/0x50()
[ 98.271029] Calling initcall 0xffffffff80867560: sock_init+0x0/0x60()<7>Losing some ticks... checking if CPU frequency changed.
[ 98.282524]
[ 98.284037] Calling initcall 0xffffffff808680c0: netlink_proto_init+0x0/0x1b0()
[ 98.291371] NET: Registered protocol family 16
[ 98.295809] Calling initcall 0xffffffff8085ce50: kobject_uevent_init+0x0/0x40()
[ 98.303147] Calling initcall 0xffffffff8085cfe0: pcibus_class_init+0x0/0x20()
[ 98.310309] Calling initcall 0xffffffff8085d960: pci_driver_init+0x0/0x20()
[ 98.317306] Calling initcall 0xffffffff8085e050: lcd_class_init+0x0/0x20()
[ 98.324211] Calling initcall 0xffffffff8085e070: backlight_class_init+0x0/0x12()
[ 98.331641] Calling initcall 0xffffffff8085f3a8: dock_init+0x0/0x42()
[ 98.338155] Calling initcall 0xffffffff80860580: tty_class_init+0x0/0x30()
[ 98.345053] Calling initcall 0xffffffff80860da0: vtconsole_class_init+0x0/0xc0()
[ 98.352512] Calling initcall 0xffffffff8084ba60: mtrr_if_init+0x0/0x80()
[ 98.359234] Calling initcall 0xffffffff8085e000: acpi_pci_init+0x0/0x30()
[ 98.366048] ACPI: bus type pci registered
[ 98.370053] Calling initcall 0xffffffff8085ec39: init_acpi_device_notify+0x0/0x4b()
[ 98.377730] Calling initcall 0xffffffff808665c0: pci_access_init+0x0/0x40()
[ 98.384713] PCI: BIOS Bug: MCFG area at f0000000 is not E820-reserved
[ 98.391135] PCI: Not using MMCONFIG.
[ 98.394707] PCI: Using configuration type 1
[ 98.398885] Calling initcall 0xffffffff8084b8a0: mtrr_init_finialize+0x0/0x40()
[ 98.406224] Calling initcall 0xffffffff80852ed0: topology_init+0x0/0x50()
[ 98.413075] Calling initcall 0xffffffff808563a0: param_sysfs_init+0x0/0x210()
[ 98.421326] Calling initcall 0xffffffff80256820: pm_sysrq_init+0x0/0x20()
[ 98.428137] Calling initcall 0xffffffff8085a000: init_bio+0x0/0x110()
[ 98.434659] Calling initcall 0xffffffff8085cca0: genhd_device_init+0x0/0x60()
[ 98.441860] Calling initcall 0xffffffff8085ea4f: acpi_init+0x0/0x1ea()
[ 98.455925] ACPI: Interpreter enabled
[ 98.459583] ACPI: Using IOAPIC for interrupt routing
[ 98.464580] Calling initcall 0xffffffff8085ed6c: acpi_ec_init+0x0/0x61()
[ 98.471310] Calling initcall 0xffffffff8085f665: acpi_pci_root_init+0x0/0x28()
[ 98.478561] Calling initcall 0xffffffff8085f77a: acpi_pci_link_init+0x0/0x48()
[ 98.485808] Calling initcall 0xffffffff8085f863: acpi_power_init+0x0/0x77()
[ 98.492795] Calling initcall 0xffffffff8085f9b8: acpi_system_init+0x0/0xc6()
[ 98.499861] Calling initcall 0xffffffff8085fa7e: acpi_event_init+0x0/0x3f()
[ 98.506847] Calling initcall 0xffffffff8085fabd: acpi_scan_init+0x0/0x1a1()
[ 98.514604] ACPI: PCI Root Bridge [PCI0] (0000:00)
[ 98.521526] PCI: Ignoring BAR0-3 of IDE controller 0000:00:1f.1
[ 98.528089] PCI: Transparent bridge - 0000:00:1e.0
[ 98.539694] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 *10 11 12 14 15)
[ 98.547150] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 *7 10 11 12 14 15)
[ 98.554582] ACPI: PCI Interrupt Link [LNKC] (IRQs *3 4 5 6 7 10 11 12 14 15)
[ 98.562037] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 10 *11 12 14 15)
[ 98.569481] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 *5 6 7 10 11 12 14 15)
[ 98.576927] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 *10 11 12 14 15)
[ 98.584364] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
[ 98.592968] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 *6 7 10 11 12 14 15)
[ 98.600295] Calling initcall 0xffffffff8085fdd9: acpi_cm_sbs_init+0x0/0x17()
[ 98.607367] Calling initcall 0xffffffff8085fdf0: pnp_init+0x0/0x20()
[ 98.613749] Linux Plug and Play Support v0.97 (c) Adam Belay
[ 98.619398] Calling initcall 0xffffffff8085fff0: pnpacpi_init+0x0/0x70()
[ 98.626125] pnp: PnP ACPI init
[ 98.631490] pnp: PnP ACPI: found 13 devices
[ 98.635668] Calling initcall 0xffffffff80860a60: misc_init+0x0/0x90()
[ 98.642136] Calling initcall 0xffffffff80861300: mod_init+0x0/0x280()
[ 98.649984] intel_rng: FWH not detected
[ 98.653816] Calling initcall 0xffffffff80861580: mod_init+0x0/0xd0()
[ 98.660213] Calling initcall 0xffffffff80861650: mod_init+0x0/0xc0()
[ 98.666590] Calling initcall 0xffffffff8049f700: cn_init+0x0/0xe0()
[ 98.672922] Calling initcall 0xffffffff80863fe0: init_scsi+0x0/0xa0()
[ 98.679497] SCSI subsystem initialized
[ 98.683234] Calling initcall 0xffffffff80864740: init_pcmcia_cs+0x0/0x40()
[ 98.690136] Calling initcall 0xffffffff80864890: usb_init+0x0/0x120()
[ 98.696664] usbcore: registered new interface driver usbfs
[ 98.702164] usbcore: registered new interface driver hub
[ 98.707500] usbcore: registered new device driver usb
[ 98.712543] Calling initcall 0xffffffff80864cd0: serio_init+0x0/0xf0()
[ 98.719107] Calling initcall 0xffffffff80865190: gameport_init+0x0/0xe0()
[ 98.725932] Calling initcall 0xffffffff80865270: input_init+0x0/0x130()
[ 98.732585] Calling initcall 0xffffffff80865680: rtc_init+0x0/0x50()
[ 98.738968] Calling initcall 0xffffffff808656d0: i2c_init+0x0/0x40()
[ 98.745375] Calling initcall 0xffffffff80866600: pci_acpi_init+0x0/0xc0()
[ 98.752180] PCI: Using ACPI for IRQ routing
[ 98.756351] PCI: If a device doesn't work, try "pci=routeirq". If it helps, post a report
[ 98.764590] Calling initcall 0xffffffff808666c0: pci_legacy_init+0x0/0x140()
[ 98.771665] Calling initcall 0xffffffff80866c70: pcibios_irq_init+0x0/0x530()
[ 98.779264] Calling initcall 0xffffffff808671a0: pcibios_init+0x0/0x70()
[ 98.786042] Calling initcall 0xffffffff80867620: proto_init+0x0/0x40()
[ 98.792601] Calling initcall 0xffffffff808677a0: net_dev_init+0x0/0x210()
[ 98.799423] Calling initcall 0xffffffff808680a0: fib_rules_init+0x0/0x20()
[ 98.806324] Calling initcall 0xffffffff80868270: genl_init+0x0/0xc0()
[ 98.812785] Calling initcall 0xffffffff80848020: late_hpet_init+0x0/0xe0()
[ 98.819684] Calling initcall 0xffffffff8084b270: pci_iommu_init+0x0/0x20()
[ 98.826594] PCI-GART: No AMD northbridge found.
[ 98.831117] Calling initcall 0xffffffff80859750: init_pipe_fs+0x0/0x50()
[ 98.837847] Calling initcall 0xffffffff8085fca3: acpi_motherboard_init+0x0/0x136()
[ 98.846035] Calling initcall 0xffffffff8085ff50: pnp_system_init+0x0/0x20()
[ 98.853057] pnp: 00:06: ioport range 0x290-0x297 has been reserved
[ 98.859236] Calling initcall 0xffffffff80860460: chr_dev_init+0x0/0x90()
[ 98.866115] Calling initcall 0xffffffff808629b0: firmware_class_init+0x0/0x80()
[ 98.873460] Calling initcall 0xffffffff80864780: init_pcmcia_bus+0x0/0x50()
[ 98.880452] Calling initcall 0xffffffff80865890: cpufreq_gov_performance_init+0x0/0x20()
[ 98.888571] Calling initcall 0xffffffff808658d0: cpufreq_gov_userspace_init+0x0/0x20()
[ 98.896517] Calling initcall 0xffffffff80865fa0: pcibios_assign_resources+0x0/0x90()
[ 98.904300] PCI: Bridge: 0000:00:01.0
[ 98.907951] IO window: c000-cfff
[ 98.911351] MEM window: faa00000-feafffff
[ 98.915526] PREFETCH window: cff00000-efefffff
[ 98.920138] PCI: Bridge: 0000:00:1c.0
[ 98.923794] IO window: disabled.
[ 98.927195] MEM window: disabled.
[ 98.930678] PREFETCH window: cfe00000-cfefffff
[ 98.935288] PCI: Bridge: 0000:00:1c.3
[ 98.938944] IO window: b000-bfff
[ 98.942345] MEM window: fa900000-fa9fffff
[ 98.946521] PREFETCH window: disabled.
[ 98.950438] PCI: Bridge: 0000:00:1c.4
[ 98.954095] IO window: a000-afff
[ 98.957495] MEM window: fa800000-fa8fffff
[ 98.961672] PREFETCH window: disabled.
[ 98.965593] PCI: Bridge: 0000:00:1e.0
[ 98.969245] IO window: disabled.
[ 98.972646] MEM window: fa700000-fa7fffff
[ 98.976822] PREFETCH window: disabled.
[ 98.980750] GSI 16 sharing vector 0xA9 and IRQ 16
[ 98.985443] ACPI: PCI Interrupt 0000:00:01.0[A] -> GSI 16 (level, low) -> IRQ 169
[ 98.992946] ACPI: PCI Interrupt 0000:00:1c.0[A] -> GSI 16 (level, low) -> IRQ 169
[ 99.000436] GSI 17 sharing vector 0xB1 and IRQ 17
[ 99.005134] ACPI: PCI Interrupt 0000:00:1c.3[D] -> GSI 19 (level, low) -> IRQ 177
[ 99.012629] ACPI: PCI Interrupt 0000:00:1c.4[A] -> GSI 16 (level, low) -> IRQ 169
[ 99.020123] Calling initcall 0xffffffff80868df0: inet_init+0x0/0x3f0()
[ 99.026691] NET: Registered protocol family 2
[ 99.040270] IP route cache hash table entries: 65536 (order: 7, 524288 bytes)
[ 99.047502] TCP established hash table entries: 262144 (order: 10, 4194304 bytes)
[ 99.056578] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
[ 99.063795] TCP: Hash tables configured (established 262144 bind 65536)
[ 99.070388] TCP reno registered
[ 99.073569] Calling initcall 0xffffffff8020e340: time_init_device+0x0/0x30()
[ 99.080708] Calling initcall 0xffffffff80848610: add_pcspkr+0x0/0x60()
[ 99.087291] Calling initcall 0xffffffff80849570: init_timer_sysfs+0x0/0x30()
[ 99.094380] Calling initcall 0xffffffff80849540: i8259A_init_sysfs+0x0/0x30()
[ 99.101564] Calling initcall 0xffffffff80849a60: vsyscall_init+0x0/0xa0()
[ 99.108389] Calling initcall 0xffffffff8084a170: sbf_init+0x0/0xe0()
[ 99.114766] Calling initcall 0xffffffff8084afe0: i8237A_init_sysfs+0x0/0x30()
[ 99.121953] Calling initcall 0xffffffff8084b520: mce_init_device+0x0/0x1a0()
[ 99.129091] Calling initcall 0xffffffff8084b410: periodic_mcheck_init+0x0/0x30()
[ 99.136514] Calling initcall 0xffffffff8084b730: thermal_throttle_init_device+0x0/0x60()
[ 99.144632] Calling initcall 0xffffffff8084c990: msr_init+0x0/0x130()
[ 99.151140] Calling initcall 0xffffffff8084cac0: microcode_init+0x0/0xb0()
[ 119.111537] IA-32 Microcode Update Driver: v1.14a <[email protected]>
[ 119.118051] Calling initcall 0xffffffff8084cb70: cpuid_init+0x0/0x130()
[ 119.124728] Calling initcall 0xffffffff8084dff0: init_lapic_sysfs+0x0/0x40()
[ 119.131829] Calling initcall 0xffffffff8084ef20: ioapic_init_sysfs+0x0/0xf0()
[ 119.139011] Calling initcall 0xffffffff80853ac0: cache_sysfs_init+0x0/0x60()
[ 119.146244] Calling initcall 0xffffffff80853dc0: x8664_sysctl_init+0x0/0x20()
[ 119.153410] Calling initcall 0xffffffff80854860: aes_init+0x0/0x330()
[ 119.159904] Calling initcall 0xffffffff80854bb0: ia32_binfmt_init+0x0/0x20()
[ 119.166971] Calling initcall 0xffffffff80854bd0: init_syscall32+0x0/0x80()
[ 119.173872] Calling initcall 0xffffffff80854c50: init_aout_binfmt+0x0/0x20()
[ 119.180936] Calling initcall 0xffffffff80855780: create_proc_profile+0x0/0x2a0()
[ 119.188363] Calling initcall 0xffffffff80855bc0: ioresources_init+0x0/0x50()
[ 119.195431] Calling initcall 0xffffffff80855d30: timekeeping_init_device+0x0/0x30()
[ 119.203126] Calling initcall 0xffffffff80855fc0: uid_cache_init+0x0/0x90()
[ 119.210472] Calling initcall 0xffffffff808565b0: init_posix_timers+0x0/0xa0()
[ 119.217630] Calling initcall 0xffffffff80856690: init_posix_cpu_timers+0x0/0x70()
[ 119.225132] Calling initcall 0xffffffff80856790: latency_init+0x0/0x30()
[ 119.231843] Calling initcall 0xffffffff808567e0: init_clocksource_sysfs+0x0/0x60()
[ 119.239450] Calling initcall 0xffffffff80856900: init_jiffies_clocksource+0x0/0x20()
[ 119.247221] Calling initcall 0xffffffff80856920: init+0x0/0x90()
[ 119.253266] Calling initcall 0xffffffff808569b0: proc_dma_init+0x0/0x30()
[ 119.260079] Calling initcall 0xffffffff80250690: percpu_modinit+0x0/0x80()
[ 119.266979] Calling initcall 0xffffffff80856a00: kallsyms_init+0x0/0x30()
[ 119.273785] Calling initcall 0xffffffff80856ab0: crash_notes_memory_init+0x0/0x50()
[ 119.281474] Calling initcall 0xffffffff80856b00: ikconfig_init+0x0/0x40()
[ 119.288287] Calling initcall 0xffffffff808582f0: init_per_zone_pages_min+0x0/0x50()
[ 119.295967] Calling initcall 0xffffffff80858dc0: pdflush_init+0x0/0x20()
[ 119.302714] Calling initcall 0xffffffff80858e00: kswapd_init+0x0/0x20()
[ 119.309359] Calling initcall 0xffffffff80858e20: setup_vmstat+0x0/0x20()
[ 119.316071] Calling initcall 0xffffffff80858ec0: procswaps_init+0x0/0x30()
[ 119.322963] Calling initcall 0xffffffff80858ef0: init_tmpfs+0x0/0xe0()
[ 119.329518] Calling initcall 0xffffffff80858fd0: cpucache_init+0x0/0x50()
[ 119.336332] Calling initcall 0xffffffff808597a0: fasync_init+0x0/0x30()
[ 119.342968] Calling initcall 0xffffffff80859f30: aio_setup+0x0/0x70()
[ 119.349457] Calling initcall 0xffffffff8085a1a0: inotify_setup+0x0/0x20()
[ 119.356257] Calling initcall 0xffffffff8085a1c0: inotify_user_setup+0x0/0xc0()
[ 119.363522] Calling initcall 0xffffffff8085a280: eventpoll_init+0x0/0xf0()
[ 119.370429] Calling initcall 0xffffffff8085a370: init_sys32_ioctl+0x0/0x100()
[ 119.377596] Calling initcall 0xffffffff8085a500: init_mbcache+0x0/0x20()
[ 119.384318] Calling initcall 0xffffffff8085a520: dnotify_init+0x0/0x30()
[ 119.391040] Calling initcall 0xffffffff8085aa10: configfs_init+0x0/0xa0()
[ 119.397862] Calling initcall 0xffffffff8085aab0: init_devpts_fs+0x0/0x40()
[ 119.404765] Calling initcall 0xffffffff8085aaf0: init_reiserfs_fs+0x0/0xb0()
[ 119.411840] Calling initcall 0xffffffff8085acd0: init_ext3_fs+0x0/0x80()
[ 119.418572] Calling initcall 0xffffffff8085ae10: journal_init+0x0/0xe0()
[ 119.425312] Calling initcall 0xffffffff8085aef0: init_ext2_fs+0x0/0x80()
[ 119.432042] Calling initcall 0xffffffff8085afb0: init_cramfs_fs+0x0/0x40()
[ 119.438944] Calling initcall 0xffffffff8085aff0: init_ramfs_fs+0x0/0x20()
[ 119.445750] Calling initcall 0xffffffff8085b030: init_minix_fs+0x0/0x70()
[ 119.452559] Calling initcall 0xffffffff8085b0e0: init_fat_fs+0x0/0x60()
[ 119.459202] Calling initcall 0xffffffff8085b140: init_msdos_fs+0x0/0x20()
[ 119.466419] Calling initcall 0xffffffff8085b160: init_vfat_fs+0x0/0x20()
[ 119.473147] Calling initcall 0xffffffff8085b180: init_iso9660_fs+0x0/0x80()
[ 119.480139] Calling initcall 0xffffffff8085b350: init_nfs_fs+0x0/0xd0()
[ 119.486808] Calling initcall 0xffffffff8085b610: init_nfsd+0x0/0xc0()
[ 119.493259] Installing knfsd (copyright (C) 1996 [email protected]).
[ 119.499710] Calling initcall 0xffffffff8085b6d0: init_nlm+0x0/0x30()
[ 119.506088] Calling initcall 0xffffffff8085b700: init_nls_ascii+0x0/0x20()
[ 119.512986] Calling initcall 0xffffffff8085b720: init_nls_iso8859_1+0x0/0x20()
[ 119.520232] Calling initcall 0xffffffff8085b740: init_smb_fs+0x0/0x80()
[ 119.526872] Calling initcall 0xffffffff8085b7c0: init_ntfs_fs+0x0/0x200()
[ 119.533671] NTFS driver 2.1.27 [Flags: R/W].
[ 119.537952] Calling initcall 0xffffffff8085b9c0: init_romfs_fs+0x0/0x70()
[ 119.544760] Calling initcall 0xffffffff8085ba30: init_autofs_fs+0x0/0x20()
[ 119.551660] Calling initcall 0xffffffff8085ba50: init_autofs4_fs+0x0/0x20()
[ 119.558646] initcall at 0xffffffff8085ba50: init_autofs4_fs+0x0/0x20(): returned with error code -16
[ 119.567795] Calling initcall 0xffffffff8085bad0: fuse_init+0x0/0x130()
[ 119.574339] fuse init (API version 7.7)
[ 119.578197] Calling initcall 0xffffffff8085bc20: init_udf_fs+0x0/0x70()
[ 119.584834] Calling initcall 0xffffffff8085bc90: init_jfs_fs+0x0/0x200()
[ 119.591569] JFS: nTxBlock = 8192, nTxLock = 65536
[ 119.599510] Calling initcall 0xffffffff8085bf60: ipc_init+0x0/0x20()
[ 119.605895] Calling initcall 0xffffffff8085c1a0: init_mqueue_fs+0x0/0xf0()
[ 119.612829] Calling initcall 0xffffffff8085c290: crypto_algapi_init+0x0/0x10()
[ 119.620079] Calling initcall 0xffffffff8085c2d0: cryptomgr_init+0x0/0x20()
[ 119.626979] Calling initcall 0xffffffff8085c2f0: hmac_module_init+0x0/0x20()
[ 119.634061] Calling initcall 0xffffffff8085c310: init+0x0/0x60()
[ 119.640091] Calling initcall 0xffffffff8085c370: init+0x0/0x20()
[ 119.646116] Calling initcall 0xffffffff8085c390: init+0x0/0x20()
[ 119.652153] Calling initcall 0xffffffff8085c3b0: init+0x0/0x20()
[ 119.658180] Calling initcall 0xffffffff8085c3d0: init+0x0/0x20()
[ 119.664216] Calling initcall 0xffffffff8085c3f0: init+0x0/0x50()
[ 119.670244] Calling initcall 0xffffffff8085c440: init+0x0/0x80()
[ 119.676290] Calling initcall 0xffffffff8085c4c0: init+0x0/0x80()
[ 119.682317] Calling initcall 0xffffffff8085c540: crypto_ecb_module_init+0x0/0x20()
[ 119.689906] Calling initcall 0xffffffff8085c560: crypto_cbc_module_init+0x0/0x20()
[ 119.697500] Calling initcall 0xffffffff8085c580: init+0x0/0x50()
[ 119.703529] Calling initcall 0xffffffff8085c5d0: init+0x0/0x20()
[ 119.709563] Calling initcall 0xffffffff8085c5f0: init+0x0/0x20()
[ 119.715600] Calling initcall 0xffffffff8085c610: init+0x0/0x50()
[ 119.722043] Calling initcall 0xffffffff8085c660: aes_init+0x0/0x330()
[ 119.728527] Calling initcall 0xffffffff8085c990: init+0x0/0x20()
[ 119.734555] Calling initcall 0xffffffff8085c9b0: init+0x0/0x20()
[ 119.740582] Calling initcall 0xffffffff8085c9d0: arc4_init+0x0/0x20()
[ 119.747043] Calling initcall 0xffffffff8085c9f0: init+0x0/0x80()
[ 119.753079] Calling initcall 0xffffffff8085ca70: init+0x0/0x20()
[ 119.759114] Calling initcall 0xffffffff8085ca90: init+0x0/0x20()
[ 119.765143] Calling initcall 0xffffffff8085cab0: init+0x0/0x20()
[ 119.771178] Calling initcall 0xffffffff8085cad0: michael_mic_init+0x0/0x20()
[ 119.778252] Calling initcall 0xffffffff8085caf0: init+0x0/0x20()
[ 119.784280] Calling initcall 0xffffffff8085cd00: noop_init+0x0/0x20()
[ 119.790754] io scheduler noop registered
[ 119.794681] Calling initcall 0xffffffff8085cd20: as_init+0x0/0x20()
[ 119.800969] io scheduler anticipatory registered (default)
[ 119.806486] Calling initcall 0xffffffff8085cd40: deadline_init+0x0/0x20()
[ 119.813291] io scheduler deadline registered
[ 119.817581] Calling initcall 0xffffffff8085cd60: cfq_init+0x0/0xb0()
[ 119.823965] io scheduler cfq registered
[ 119.827810] Calling initcall 0xffffffff8085ce10: blk_trace_init+0x0/0x40()
[ 119.834713] Calling initcall 0xffffffff80436340: pci_init+0x0/0x40()
[ 119.842985] Calling initcall 0xffffffff8085d980: pci_sysfs_init+0x0/0x50()
[ 119.849934] Calling initcall 0xffffffff8085d9d0: pci_proc_init+0x0/0x80()
[ 119.856767] Calling initcall 0xffffffff8085da50: pcie_portdrv_init+0x0/0x50()
[ 119.864012] assign_interrupt_mode Found MSI capability
[ 119.869273] assign_interrupt_mode Found MSI capability
[ 119.874552] assign_interrupt_mode Found MSI capability
[ 119.879815] assign_interrupt_mode Found MSI capability
[ 119.885041] Calling initcall 0xffffffff8085daa0: aer_service_init+0x0/0x20()
[ 119.892132] Calling initcall 0xffffffff8085dac0: pci_hotplug_init+0x0/0x60()
[ 119.899206] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[ 119.904766] Calling initcall 0xffffffff8085db20: dummyphp_init+0x0/0x60()
[ 119.911571] fakephp: Fake PCI Hot Plug Controller Driver
[ 119.917195] Calling initcall 0xffffffff8085db80: acpiphp_init+0x0/0x60()
[ 119.923918] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
[ 119.931784] Calling initcall 0xffffffff8085dde0: ibm_acpiphp_init+0x0/0x1a0()
[ 119.939089] acpiphp_ibm: ibm_find_acpi_device: Failed to get device information<3>acpiphp_ibm: ibm_find_acpi_device: Failed to get device information<3>acpiphp_ibm: ibm_find_acpi_device: Failed to get device information<3>acpiphp_ibm: ibm_acpiphp_init: acpi_walk_namespace failed
[ 119.965170] Calling initcall 0xffffffff8085ec84: acpi_ac_init+0x0/0x45()
[ 119.971907] Calling initcall 0xffffffff8085ecc9: acpi_battery_init+0x0/0x45()
[ 119.979070] Calling initcall 0xffffffff8085ed0e: acpi_button_init+0x0/0x5e()
[ 119.986149] ACPI: Power Button (FF) [PWRF]
[ 119.990257] ACPI: Power Button (CM) [PWRB]
[ 119.994350] Calling initcall 0xffffffff8085f34a: acpi_fan_init+0x0/0x5e()
[ 120.001164] Calling initcall 0xffffffff8085f3ea: acpi_video_init+0x0/0x5e()
[ 120.008183] Calling initcall 0xffffffff8085f448: hotkey_init+0x0/0x21d()
[ 120.014910] Using specific hotkey driver
[ 120.018819] Calling initcall 0xffffffff8085f742: irqrouter_init_sysfs+0x0/0x38()
[ 120.026268] Calling initcall 0xffffffff8085f8da: acpi_processor_init+0x0/0x80()
[ 120.033674] ACPI Error (psparse-0537): Method parse/execution failed [\_PR_.CPU1._PDC] (Node ffff810002f7bab0), AE_BAD_HEADER
[ 120.045040] ACPI: Processor [CPU1] (supports 8 throttling states)
[ 120.051209] ACPI Error (psparse-0537): Method parse/execution failed [\_PR_.CPU2._PDC] (Node ffff810002f7b9b0), AE_BAD_HEADER
[ 120.062564] ACPI: Processor [CPU2] (supports 8 throttling states)
[ 120.068682] ACPI: Getting cpuindex for acpiid 0x3
[ 120.073380] ACPI: Getting cpuindex for acpiid 0x4
[ 120.078077] Calling initcall 0xffffffff8085f95a: acpi_thermal_init+0x0/0x5e()
[ 120.085237] Calling initcall 0xffffffff80860500: rand_initialize+0x0/0x30()
[ 120.092233] Calling initcall 0xffffffff808605b0: tty_init+0x0/0x1f0()
[ 120.100012] Calling initcall 0xffffffff808607a0: pty_init+0x0/0x2c0()
[ 120.106492] Calling initcall 0xffffffff80861090: rtc_init+0x0/0x1d0()
[ 120.113007] Real Time Clock Driver v1.12ac
[ 120.117104] Calling initcall 0xffffffff80861260: hpet_init+0x0/0x80()
[ 120.123603] Calling initcall 0xffffffff80861710: agp_init+0x0/0x30()
[ 120.129983] Linux agpgart interface v0.101 (c) Dave Jones
[ 120.135363] Calling initcall 0xffffffff80861890: drm_core_init+0x0/0x160()
[ 120.142269] [drm] Initialized drm 1.0.1 20051102
[ 120.146873] Calling initcall 0xffffffff80861ab0: hangcheck_init+0x0/0x90()
[ 120.153773] Hangcheck: starting hangcheck timer 0.9.0 (tick is 180 seconds, margin is 60 seconds).
[ 120.162706] Hangcheck: Using monotonic_clock().
[ 120.167230] Calling initcall 0xffffffff80861b40: cn_proc_init+0x0/0x40()
[ 120.173958] Calling initcall 0xffffffff808620d0: serial8250_init+0x0/0x170()
[ 120.181030] Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled
[ 120.188843] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[ 120.194957] Calling initcall 0xffffffff80862240: serial8250_pnp_init+0x0/0x20()
[ 120.202466] 00:0a: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[ 120.208046] Calling initcall 0xffffffff80862260: serial8250_pci_init+0x0/0x20()
[ 120.215414] Calling initcall 0xffffffff80862a80: topology_sysfs_init+0x0/0x60()
[ 120.222762] Calling initcall 0xffffffff80862ae0: rd_init+0x0/0x1c0()
[ 120.229499] RAMDISK driver initialized: 16 RAM disks of 65536K size 1024 blocksize
[ 120.237043] Calling initcall 0xffffffff80862d10: loop_init+0x0/0x330()
[ 120.243768] loop: loaded (max 8 devices)
[ 120.247680] Calling initcall 0xffffffff80863040: pkt_init+0x0/0x100()
[ 120.254171] Calling initcall 0xffffffff80863140: init_cryptoloop+0x0/0x40()
[ 120.261152] Calling initcall 0xffffffff80863180: skge_init+0x0/0x20()
[ 120.267641] Calling initcall 0xffffffff80863230: net_olddevs_init+0x0/0xc0()
[ 120.274775] Calling initcall 0xffffffff808633a0: dummy_init_module+0x0/0xf0()
[ 120.281975] Calling initcall 0xffffffff80863490: tun_init+0x0/0x70()
[ 120.288355] tun: Universal TUN/TAP device driver, 1.6
[ 120.293389] tun: (C) 1999-2004 Max Krasnyansky <[email protected]>
[ 120.299572] Calling initcall 0xffffffff804d1390: init_netconsole+0x0/0x80()
[ 120.306568] netconsole: not configured, aborting
[ 120.311177] Calling initcall 0xffffffff804d1c20: amd74xx_ide_init+0x0/0x20()
[ 120.318268] Calling initcall 0xffffffff804d3070: atiixp_ide_init+0x0/0x20()
[ 120.325247] Calling initcall 0xffffffff804d3710: generic_ide_init+0x0/0x20()
[ 120.332312] Calling initcall 0xffffffff80863dc0: ide_init+0x0/0x70()
[ 120.338701] Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
[ 120.345035] ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
[ 120.353103] Calling initcall 0xffffffff80863f60: ide_generic_init+0x0/0x20()
[ 121.153034] hda: TSSTcorpCD/DVDW SH-S162L, ATAPI CD/DVD-ROM drive
[ 122.288020] ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
[ 122.292592] Calling initcall 0xffffffff80863f80: idedisk_init+0x0/0x20()
[ 122.299329] Calling initcall 0xffffffff80863fa0: ide_cdrom_init+0x0/0x20()
[ 122.306927] hda: ATAPI CD-ROM drive, 0kB Cache
[ 122.311453] Uniform CD-ROM driver Revision: 3.20
[ 122.318797] Calling initcall 0xffffffff808642b0: spi_transport_init+0x0/0x30()
[ 122.326058] Calling initcall 0xffffffff808642e0: fc_transport_init+0x0/0x50()
[ 122.333227] Calling initcall 0xffffffff80864330: iscsi_transport_init+0x0/0x130()
[ 122.340725] Loading iSCSI transport class v2.0-685.Calling initcall 0xffffffff80864460: sas_transport_init+0x0/0xc0()
[ 122.351385] Calling initcall 0xffffffff80864520: init_idescsi_module+0x0/0x20()
[ 122.358730] Calling initcall 0xffffffff80864540: init_sd+0x0/0x80()
[ 122.365041] Calling initcall 0xffffffff808645c0: init_sr+0x0/0x30()
[ 122.371355] Calling initcall 0xffffffff808645f0: init_sg+0x0/0x140()
[ 122.377748] Calling initcall 0xffffffff80864730: cdrom_init+0x0/0x10()
[ 122.384301] Calling initcall 0xffffffff80864850: nonstatic_sysfs_init+0x0/0x20()
[ 122.391712] Calling initcall 0xffffffff80864870: yenta_socket_init+0x0/0x20()
[ 122.398889] Calling initcall 0xffffffff80864b10: ehci_hcd_init+0x0/0x20()
[ 122.405734] GSI 18 sharing vector 0xE1 and IRQ 18
[ 122.410428] ACPI: PCI Interrupt 0000:00:1d.7[A] -> GSI 20 (level, low) -> IRQ 225
[ 122.418604] ehci_hcd 0000:00:1d.7: EHCI Host Controller
[ 122.423882] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 1
[ 122.431284] ehci_hcd 0000:00:1d.7: debug port 1
[ 122.435822] ehci_hcd 0000:00:1d.7: irq 225, io mem 0xfebfbc00
[ 122.445408] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
[ 122.452972] usb usb1: configuration #1 chosen from 1 choice
[ 122.458565] hub 1-0:1.0: USB hub found
[ 122.462308] hub 1-0:1.0: 8 ports detected
[ 122.566680] Calling initcall 0xffffffff80864b30: ohci_hcd_pci_init+0x0/0x40()
[ 122.573867] Calling initcall 0xffffffff80864b70: uhci_hcd_init+0x0/0xa0()
[ 122.580689] USB Universal Host Controller Interface driver v3.0
[ 122.586632] ACPI: PCI Interrupt 0000:00:1d.0[A] -> GSI 20 (level, low) -> IRQ 225
[ 122.594132] uhci_hcd 0000:00:1d.0: UHCI Host Controller
[ 122.599372] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2
[ 122.606764] uhci_hcd 0000:00:1d.0: irq 225, io base 0x0000e480
[ 122.612663] usb usb2: configuration #1 chosen from 1 choice
[ 122.618246] hub 2-0:1.0: USB hub found
[ 122.621997] hub 2-0:1.0: 2 ports detected
[ 122.726336] GSI 19 sharing vector 0xE9 and IRQ 19
[ 122.731030] ACPI: PCI Interrupt 0000:00:1d.1[B] -> GSI 17 (level, low) -> IRQ 233
[ 122.738526] uhci_hcd 0000:00:1d.1: UHCI Host Controller
[ 122.743765] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 3
[ 122.751158] uhci_hcd 0000:00:1d.1: irq 233, io base 0x0000e800
[ 122.757052] usb usb3: configuration #1 chosen from 1 choice
[ 122.762633] hub 3-0:1.0: USB hub found
[ 122.766376] hub 3-0:1.0: 2 ports detected
[ 122.871033] GSI 20 sharing vector 0x32 and IRQ 20
[ 122.875729] ACPI: PCI Interrupt 0000:00:1d.2[C] -> GSI 18 (level, low) -> IRQ 50
[ 122.883311] uhci_hcd 0000:00:1d.2: UHCI Host Controller
[ 122.888545] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 4
[ 122.895940] uhci_hcd 0000:00:1d.2: irq 50, io base 0x0000e880
[ 122.901755] usb usb4: configuration #1 chosen from 1 choice
[ 122.907337] hub 4-0:1.0: USB hub found
[ 122.911083] hub 4-0:1.0: 2 ports detected
[ 122.931172] usb 1-7: new high speed USB device using ehci_hcd and address 3
[ 123.015652] ACPI: PCI Interrupt 0000:00:1d.3[D] -> GSI 19 (level, low) -> IRQ 177
[ 123.023140] uhci_hcd 0000:00:1d.3: UHCI Host Controller
[ 123.028377] uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 5
[ 123.035772] uhci_hcd 0000:00:1d.3: irq 177, io base 0x0000ec00
[ 123.041681] usb usb5: configuration #1 chosen from 1 choice
[ 123.047273] hub 5-0:1.0: USB hub found
[ 123.051024] hub 5-0:1.0: 2 ports detected
[ 123.062886] usb 1-7: configuration #1 chosen from 1 choice
[ 123.068600] hub 1-7:1.0: USB hub found
[ 123.072683] hub 1-7:1.0: 4 ports detected
[ 123.155177] Calling initcall 0xffffffff80864c10: usb_stor_init+0x0/0x50()
[ 123.161997] Initializing USB Mass Storage driver...
[ 123.383975] usb 2-2: new low speed USB device using uhci_hcd and address 2
[ 123.554610] usb 2-2: configuration #1 chosen from 1 choice
[ 123.837499] usb 1-7.3: new high speed USB device using ehci_hcd and address 4
[ 123.927134] usb 1-7.3: configuration #1 chosen from 1 choice
[ 123.934420] usbcore: registered new interface driver usb-storage
[ 123.940420] USB Mass Storage support registered.
[ 123.945027] Calling initcall 0xffffffff80864c60: hid_init+0x0/0x50()
[ 123.951432] usbcore: registered new interface driver hiddev
[ 123.970711] input: Logitech USB-PS/2 Optical Mouse as /class/input/input0
[ 123.977490] input: USB HID v1.10 Mouse [Logitech USB-PS/2 Optical Mouse] on usb-0000:00:1d.0-2
[ 123.986127] usbcore: registered new interface driver usbhid
[ 123.991686] drivers/usb/input/hid-core.c: v2.6:USB HID core driver
[ 123.997850] Calling initcall 0xffffffff80864dc0: i8042_init+0x0/0x350()
[ 124.004549] PNP: PS/2 Controller [PNP0303:PS2K] at 0x60,0x64 irq 1
[ 124.010711] PNP: PS/2 controller doesn't have AUX irq; using default 12
[ 124.019412] serio: i8042 AUX port at 0x60,0x64 irq 12
[ 124.024509] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 124.029461] Calling initcall 0xffffffff80865110: serport_init+0x0/0x40()
[ 124.036184] Calling initcall 0xffffffff80865150: pcips2_init+0x0/0x20()
[ 124.042855] Calling initcall 0xffffffff80865170: serio_raw_init+0x0/0x20()
[ 124.049752] Calling initcall 0xffffffff808653a0: mousedev_init+0x0/0xc0()
[ 124.056615] mice: PS/2 mouse device common for all mice
[ 124.061828] Calling initcall 0xffffffff80865460: evdev_init+0x0/0x20()
[ 124.068409] Calling initcall 0xffffffff80865480: atkbd_init+0x0/0x20()
[ 124.074962] Calling initcall 0xffffffff808654a0: pcspkr_init+0x0/0x20()
[ 124.081663] input: PC Speaker as /class/input/input1
[ 124.121187] input: AT Translated Set 2 keyboard as /class/input/input2
[ 124.127725] Calling initcall 0xffffffff808654c0: uinput_init+0x0/0x20()
[ 124.134387] Calling initcall 0xffffffff80865710: amd756_init+0x0/0x20()
[ 124.141058] Calling initcall 0xffffffff80865730: i2c_amd8111_init+0x0/0x20()
[ 124.148147] Calling initcall 0xffffffff80865750: i2c_i801_init+0x0/0x20()
[ 124.154989] GSI 21 sharing vector 0x3A and IRQ 21
[ 124.159686] ACPI: PCI Interrupt 0000:00:1f.3[B] -> GSI 23 (level, low) -> IRQ 58
[ 124.167125] Calling initcall 0xffffffff80865770: i2c_i810_init+0x0/0x20()
[ 124.173953] Calling initcall 0xffffffff80865790: nforce2_init+0x0/0x20()
[ 124.180698] Calling initcall 0xffffffff808657b0: i2c_piix4_init+0x0/0x20()
[ 124.187626] Calling initcall 0xffffffff808657d0: cpufreq_stats_init+0x0/0xc0()
[ 124.194868] Calling initcall 0xffffffff808658b0: cpufreq_gov_powersave_init+0x0/0x20()
[ 124.202814] Calling initcall 0xffffffff808658f0: cpufreq_gov_dbs_init+0x0/0x20()
[ 124.210225] Calling initcall 0xffffffff80865910: cpufreq_gov_dbs_init+0x0/0x20()
[ 124.217636] Calling initcall 0xffffffff80867b20: flow_cache_init+0x0/0x1c0()
[ 124.224711] Calling initcall 0xffffffff80867ce0: pg_init+0x0/0x3c0()
[ 124.231102] pktgen v2.68: Packet Generator for packet performance testing.
[ 124.237972] Calling initcall 0xffffffff80869580: ipip_init+0x0/0xa0()
[ 124.244435] IPv4 over IPv4 tunneling driver
[ 124.248652] Calling initcall 0xffffffff80869620: ipgre_init+0x0/0xb0()
[ 124.255210] GRE over IPv4 tunneling driver
[ 124.259332] Calling initcall 0xffffffff80869760: ah4_init+0x0/0x80()
[ 124.265717] Calling initcall 0xffffffff808697e0: esp4_init+0x0/0x80()
[ 124.272178] Calling initcall 0xffffffff80869860: ipcomp4_init+0x0/0x80()
[ 124.278896] Calling initcall 0xffffffff808698e0: ipip_init+0x0/0x70()
[ 124.285355] Calling initcall 0xffffffff80869950: tunnel4_init+0x0/0x40()
[ 124.292076] Calling initcall 0xffffffff80869990: xfrm4_transport_init+0x0/0x20()
[ 124.299496] Calling initcall 0xffffffff808699b0: xfrm4_tunnel_init+0x0/0x20()
[ 124.306655] Calling initcall 0xffffffff8086b1b0: rr_init+0x0/0x20()
[ 124.312943] Calling initcall 0xffffffff8086b1d0: random_init+0x0/0x20()
[ 124.319583] Calling initcall 0xffffffff8086b1f0: wrandom_init+0x0/0x70()
[ 124.326312] Calling initcall 0xffffffff8086b260: drr_init+0x0/0x50()
[ 124.332710] Calling initcall 0xffffffff805d1e80: ipv4_netfilter_init+0x0/0x20()
[ 124.340035] Calling initcall 0xffffffff8086b2b0: inet_diag_init+0x0/0x70()
[ 124.346940] Calling initcall 0xffffffff8086b320: tcp_diag_init+0x0/0x20()
[ 124.353751] Calling initcall 0xffffffff8086b340: cubictcp_register+0x0/0x90()
[ 124.360910] TCP cubic registered
[ 124.364129] Calling initcall 0xffffffff8086b610: xfrm_user_init+0x0/0x50()
[ 124.371028] Initializing XFRM netlink socket
[ 124.375287] Calling initcall 0xffffffff8086b660: af_unix_init+0x0/0x80()
[ 124.382016] NET: Registered protocol family 1
[ 124.386364] Calling initcall 0xffffffff8086b6e0: packet_init+0x0/0x60()
[ 124.393003] NET: Registered protocol family 17
[ 124.397439] Calling initcall 0xffffffff8086b740: ipsec_pfkey_init+0x0/0xa0()
[ 124.404512] NET: Registered protocol family 15
[ 124.408950] Calling initcall 0xffffffff8086b7e0: init_sunrpc+0x0/0x50()
[ 124.415614] Calling initcall 0xffffffff8086b830: init_rpcsec_gss+0x0/0x40()
[ 124.422596] Calling initcall 0xffffffff8086b870: init_kerberos_module+0x0/0x40()
[ 124.430015] Calling initcall 0xffffffff8086b8b0: init_spkm3_module+0x0/0x26()
[ 124.437183] Calling initcall 0xffffffff8084eaf0: init_lapic_nmi_sysfs+0x0/0x40()
[ 124.444633] Calling initcall 0xffffffff808511e0: centrino_init+0x0/0xe0()
[ 124.451451] Calling initcall 0xffffffff808512c0: acpi_cpufreq_init+0x0/0xd0()
[ 124.458614] Calling initcall 0xffffffff808567c0: clocksource_done_booting+0x0/0x20()
[ 124.466386] Calling initcall 0xffffffff80461d92: acpi_poweroff_init+0x0/0x56()
[ 124.473660] Calling initcall 0xffffffff808604f0: seqgen_init+0x0/0x10()
[ 124.480309] Calling initcall 0xffffffff808627a0: early_uart_console_switch+0x0/0x90()
[ 124.488159] Calling initcall 0xffffffff80863fc0: init_ide_cs+0x0/0x20()
[ 124.494817] Calling initcall 0xffffffff808654e0: rtc_hctosys+0x0/0x1a0()
[ 124.501536] drivers/rtc/hctosys.c: unable to open rtc device (rtc0)
[ 124.507783] Calling initcall 0xffffffff8057cc30: net_random_reseed+0x0/0xa0()
[ 124.514945] Calling initcall 0xffffffff80869240: tcp_congestion_default+0x0/0x20()
[ 124.522533] Calling initcall 0xffffffff8086a3a0: ip_auto_config+0x0/0xe10()
[ 124.529580] VFS: Cannot open root device "sda2" or unknown-block(0,0)
[ 124.536000] Please append a correct "root=" boot option
[ 124.541214] Kernel panic - not syncing: VFS: Unable to mount root fs on unknown-block(0,0)
[ 124.549455]


Attachments:
winkc2d1-log-3.txt (39.17 kB)

2006-10-02 17:01:12

by Matthias Hentges

[permalink] [raw]
Subject: Re: PCI: BIOS Bug: MCFG area at f0000000 is not E820-reserved with 2.6.18 kernel

Hello Wink,

Am Sonntag, den 01.10.2006, 18:12 -0700 schrieb Wink Saville:
> I'm trying to build the 2.6.18 kernel for a Intel Core 2 Duo 2.4GHZ in a
> Asus P5W DH Deluxe Motherboard which has a 975 chip set. It does work
> when booting from a 2.6.15-27 kernel installed from Ubuntu 2.06 LTS.
>
> When failing I get three messages on the screen:
>
> PCI: BIOS Bug: MCFG area at f0000000 is not E820-reserved
> PCI: Not using MMCONFIG
> Intel-rng: FWH not detected
>
> The first two appear to be from lines 215 & 217 of mmconfig.c (x86_64)
> and the other is from line 313 of intel-rng.c.
>
> Attached is my config file, I've tried both Generic-X86-64 and Intel
> EM64T for the Processor family.
>

I'm using the exact same motherboard and CPU and saw some hangs w/
enabled nvidia FB driver.
I'm using 2.6.18-mm1 currently w/o any major problems.

FWIW, I'm seeing identical error messages / warning , but they appear to
be harmless.

My .config for 2.6.18-mm1 is attached

HTH
--
Matthias 'CoreDump' Hentges

You can reach me in #openzaurus on Freenode.

My OS: Debian SID. Geek by Nature, Linux by Choice


Attachments:
config.gz (15.67 kB)
signature.asc (189.00 B)
Dies ist ein digital signierter Nachrichtenteil
Download all attachments

2006-10-03 04:12:22

by Wink Saville

[permalink] [raw]
Subject: Re: PCI: BIOS Bug: MCFG area at f0000000 is not E820-reserved with 2.6.18 kernel

Matthias,

Thanks, I tried your config file on 2.6.18 and it works!

The first time I tried my command line was:

Command line: root=/dev/sda2 ro quiet splash initcall_debug
console=ttyS0,115200n8 loglevel=7 video=nvidiafb:nomtrr

and it came up but no keyboard or mouse, I changed it too:

Command line: root=/dev/sda2 ro quiet splash

You mentioned you "saw some hangs", I assume with the current
configuration your having no problems with stability?

Thanks again,

Wink

2006-10-03 12:23:26

by Matthias Hentges

[permalink] [raw]
Subject: Re: PCI: BIOS Bug: MCFG area at f0000000 is not E820-reserved with 2.6.18 kernel

Hi Wink,

Am Montag, den 02.10.2006, 21:12 -0700 schrieb Wink Saville:
> Matthias,
>
> Thanks, I tried your config file on 2.6.18 and it works!
>
> The first time I tried my command line was:
>
> Command line: root=/dev/sda2 ro quiet splash initcall_debug
> console=ttyS0,115200n8 loglevel=7 video=nvidiafb:nomtrr
>
> and it came up but no keyboard or mouse, I changed it too:
>
> Command line: root=/dev/sda2 ro quiet splash
>
> You mentioned you "saw some hangs", I assume with the current
> configuration your having no problems with stability?
>

correct. These hangs at boot-time were all related to the nvidia FB
driver. The current config with 2.6.18-mm1 is rock-stable for me ( the
box is running 24/7 ).

I was seeing randon freezes w/ 2.6.18-mm2 for which I could not identify
the cause.

--
Matthias 'CoreDump' Hentges

Webmaster of hentges.net and OpenZaurus developer.
You can reach me in #openzaurus on Freenode.

My OS: Debian SID. Geek by Nature, Linux by Choice


Attachments:
signature.asc (189.00 B)
Dies ist ein digital signierter Nachrichtenteil

2006-10-03 13:30:51

by Arjan van de Ven

[permalink] [raw]
Subject: Re: PCI: BIOS Bug: MCFG area at f0000000 is not E820-reserved with 2.6.18 kernel

On Mon, 2006-10-02 at 21:12 -0700, Wink Saville wrote:
> Matthias,
>
> Thanks, I tried your config file on 2.6.18 and it works!
>
> The first time I tried my command line was:
>
> Command line: root=/dev/sda2 ro quiet splash initcall_debug
> console=ttyS0,115200n8 loglevel=7 video=nvidiafb:nomtrr
>
> and it came up but no keyboard or mouse, I changed it too:
>
> Command line: root=/dev/sda2 ro quiet splash
>
> You mentioned you "saw some hangs", I assume with the current
> configuration your having no problems with stability?


please please remove "quiet"... that removes any kind of useful debug
output! It also makes you point at the wrong party for blaming hangs
on ;)


2006-10-03 16:33:07

by Wink Saville

[permalink] [raw]
Subject: Re: PCI: BIOS Bug: MCFG area at f0000000 is not E820-reserved with 2.6.18 kernel

#
# Automatically generated make config: don't edit
# Linux kernel version: 2.6.18
# Mon Oct 2 23:28:40 2006
#
CONFIG_X86_64=y
CONFIG_64BIT=y
CONFIG_X86=y
CONFIG_ZONE_DMA32=y
CONFIG_LOCKDEP_SUPPORT=y
CONFIG_STACKTRACE_SUPPORT=y
CONFIG_SEMAPHORE_SLEEPERS=y
CONFIG_MMU=y
CONFIG_RWSEM_GENERIC_SPINLOCK=y
CONFIG_GENERIC_HWEIGHT=y
CONFIG_GENERIC_CALIBRATE_DELAY=y
CONFIG_X86_CMPXCHG=y
CONFIG_EARLY_PRINTK=y
CONFIG_GENERIC_ISA_DMA=y
CONFIG_GENERIC_IOMAP=y
CONFIG_ARCH_MAY_HAVE_PC_FDC=y
CONFIG_ARCH_POPULATES_NODE_MAP=y
CONFIG_DMI=y
CONFIG_AUDIT_ARCH=y
CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"

#
# Code maturity level options
#
CONFIG_EXPERIMENTAL=y
CONFIG_LOCK_KERNEL=y
CONFIG_INIT_ENV_ARG_LIMIT=32

#
# General setup
#
CONFIG_LOCALVERSION="-w6"
# CONFIG_LOCALVERSION_AUTO is not set
CONFIG_SWAP=y
CONFIG_SYSVIPC=y
CONFIG_POSIX_MQUEUE=y
CONFIG_BSD_PROCESS_ACCT=y
# CONFIG_BSD_PROCESS_ACCT_V3 is not set
# CONFIG_TASKSTATS is not set
CONFIG_AUDIT=y
CONFIG_AUDITSYSCALL=y
CONFIG_IKCONFIG=y
CONFIG_IKCONFIG_PROC=y
CONFIG_CPUSETS=y
CONFIG_RELAY=y
CONFIG_INITRAMFS_SOURCE=""
CONFIG_CC_OPTIMIZE_FOR_SIZE=y
CONFIG_SYSCTL=y
# CONFIG_EMBEDDED is not set
CONFIG_UID16=y
# CONFIG_SYSCTL_SYSCALL is not set
CONFIG_KALLSYMS=y
# CONFIG_KALLSYMS_ALL is not set
# CONFIG_KALLSYMS_EXTRA_PASS is not set
CONFIG_HOTPLUG=y
CONFIG_PRINTK=y
CONFIG_BUG=y
CONFIG_ELF_CORE=y
CONFIG_BASE_FULL=y
CONFIG_FUTEX=y
CONFIG_EPOLL=y
CONFIG_SHMEM=y
CONFIG_SLAB=y
CONFIG_VM_EVENT_COUNTERS=y
CONFIG_RT_MUTEXES=y
# CONFIG_TINY_SHMEM is not set
CONFIG_BASE_SMALL=0
# CONFIG_SLOB is not set

#
# Loadable module support
#
CONFIG_MODULES=y
CONFIG_MODULE_UNLOAD=y
CONFIG_MODULE_FORCE_UNLOAD=y
# CONFIG_MODVERSIONS is not set
# CONFIG_MODULE_SRCVERSION_ALL is not set
CONFIG_KMOD=y
CONFIG_STOP_MACHINE=y

#
# Block layer
#
CONFIG_BLOCK=y
CONFIG_LBD=y
# CONFIG_BLK_DEV_IO_TRACE is not set
# CONFIG_LSF is not set

#
# IO Schedulers
#
CONFIG_IOSCHED_NOOP=y
CONFIG_IOSCHED_AS=y
CONFIG_IOSCHED_DEADLINE=y
CONFIG_IOSCHED_CFQ=y
CONFIG_DEFAULT_AS=y
# CONFIG_DEFAULT_DEADLINE is not set
# CONFIG_DEFAULT_CFQ is not set
# CONFIG_DEFAULT_NOOP is not set
CONFIG_DEFAULT_IOSCHED="anticipatory"

#
# Processor type and features
#
CONFIG_X86_PC=y
# CONFIG_X86_VSMP is not set
# CONFIG_MK8 is not set
CONFIG_MPSC=y
# CONFIG_GENERIC_CPU is not set
CONFIG_X86_L1_CACHE_BYTES=128
CONFIG_X86_L1_CACHE_SHIFT=7
CONFIG_X86_INTERNODE_CACHE_BYTES=128
CONFIG_X86_TSC=y
CONFIG_X86_GOOD_APIC=y
# CONFIG_MICROCODE is not set
CONFIG_X86_MSR=y
CONFIG_X86_CPUID=y
CONFIG_X86_HT=y
CONFIG_X86_IO_APIC=y
CONFIG_X86_LOCAL_APIC=y
# CONFIG_MTRR is not set
CONFIG_SMP=y
# CONFIG_SCHED_SMT is not set
CONFIG_SCHED_MC=y
# CONFIG_PREEMPT_NONE is not set
CONFIG_PREEMPT_VOLUNTARY=y
# CONFIG_PREEMPT is not set
CONFIG_PREEMPT_BKL=y
# CONFIG_NUMA is not set
CONFIG_ARCH_SPARSEMEM_ENABLE=y
CONFIG_ARCH_FLATMEM_ENABLE=y
CONFIG_SELECT_MEMORY_MODEL=y
CONFIG_FLATMEM_MANUAL=y
# CONFIG_DISCONTIGMEM_MANUAL is not set
# CONFIG_SPARSEMEM_MANUAL is not set
CONFIG_FLATMEM=y
CONFIG_FLAT_NODE_MEM_MAP=y
# CONFIG_SPARSEMEM_STATIC is not set
CONFIG_SPLIT_PTLOCK_CPUS=4
CONFIG_RESOURCES_64BIT=y
CONFIG_NR_CPUS=4
# CONFIG_HOTPLUG_CPU is not set
CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y
CONFIG_HPET_TIMER=y
# CONFIG_HPET_EMULATE_RTC is not set
CONFIG_IOMMU=y
# CONFIG_CALGARY_IOMMU is not set
CONFIG_SWIOTLB=y
CONFIG_X86_MCE=y
CONFIG_X86_MCE_INTEL=y
CONFIG_X86_MCE_AMD=y
CONFIG_KEXEC=y
# CONFIG_CRASH_DUMP is not set
CONFIG_PHYSICAL_START=0x200000
CONFIG_SECCOMP=y
# CONFIG_CC_STACKPROTECTOR is not set
# CONFIG_HZ_100 is not set
CONFIG_HZ_250=y
# CONFIG_HZ_1000 is not set
CONFIG_HZ=250
# CONFIG_REORDER is not set
CONFIG_K8_NB=y
CONFIG_GENERIC_HARDIRQS=y
CONFIG_GENERIC_IRQ_PROBE=y
CONFIG_ISA_DMA_API=y
CONFIG_GENERIC_PENDING_IRQ=y

#
# Power management options
#
CONFIG_PM=y
CONFIG_PM_LEGACY=y
# CONFIG_PM_DEBUG is not set
# CONFIG_PM_SYSFS_DEPRECATED is not set

#
# ACPI (Advanced Configuration and Power Interface) Support
#
CONFIG_ACPI=y
CONFIG_ACPI_AC=y
CONFIG_ACPI_BATTERY=y
CONFIG_ACPI_BUTTON=y
CONFIG_ACPI_VIDEO=y
CONFIG_ACPI_HOTKEY=y
CONFIG_ACPI_FAN=y
CONFIG_ACPI_DOCK=y
CONFIG_ACPI_PROCESSOR=y
CONFIG_ACPI_THERMAL=y
# CONFIG_ACPI_ASUS is not set
# CONFIG_ACPI_IBM is not set
# CONFIG_ACPI_TOSHIBA is not set
# CONFIG_ACPI_CUSTOM_DSDT is not set
CONFIG_ACPI_BLACKLIST_YEAR=0
# CONFIG_ACPI_DEBUG is not set
CONFIG_ACPI_EC=y
CONFIG_ACPI_POWER=y
CONFIG_ACPI_SYSTEM=y
CONFIG_X86_PM_TIMER=y
CONFIG_ACPI_CONTAINER=y

#
# CPU Frequency scaling
#
CONFIG_CPU_FREQ=y
CONFIG_CPU_FREQ_TABLE=y
CONFIG_CPU_FREQ_DEBUG=y
CONFIG_CPU_FREQ_STAT=y
CONFIG_CPU_FREQ_STAT_DETAILS=y
CONFIG_CPU_FREQ_DEFAULT_GOV_PERFORMANCE=y
# CONFIG_CPU_FREQ_DEFAULT_GOV_USERSPACE is not set
CONFIG_CPU_FREQ_GOV_PERFORMANCE=y
CONFIG_CPU_FREQ_GOV_POWERSAVE=y
CONFIG_CPU_FREQ_GOV_USERSPACE=y
CONFIG_CPU_FREQ_GOV_ONDEMAND=y
CONFIG_CPU_FREQ_GOV_CONSERVATIVE=y

#
# CPUFreq processor drivers
#
# CONFIG_X86_POWERNOW_K8 is not set
CONFIG_X86_SPEEDSTEP_CENTRINO=y
CONFIG_X86_SPEEDSTEP_CENTRINO_ACPI=y
CONFIG_X86_ACPI_CPUFREQ=y

#
# shared options
#
# CONFIG_X86_ACPI_CPUFREQ_PROC_INTF is not set
# CONFIG_X86_SPEEDSTEP_LIB is not set

#
# Bus options (PCI etc.)
#
CONFIG_PCI=y
CONFIG_PCI_DIRECT=y
CONFIG_PCI_MMCONFIG=y
CONFIG_PCIEPORTBUS=y
CONFIG_PCIEAER=y
CONFIG_PCI_MSI=y
# CONFIG_PCI_MULTITHREAD_PROBE is not set
# CONFIG_PCI_DEBUG is not set

#
# PCCARD (PCMCIA/CardBus) support
#
# CONFIG_PCCARD is not set

#
# PCI Hotplug Support
#
# CONFIG_HOTPLUG_PCI is not set

#
# Executable file formats / Emulations
#
CONFIG_BINFMT_ELF=y
CONFIG_BINFMT_MISC=y
CONFIG_IA32_EMULATION=y
CONFIG_IA32_AOUT=y
CONFIG_COMPAT=y
CONFIG_SYSVIPC_COMPAT=y

#
# Networking
#
CONFIG_NET=y

#
# Networking options
#
# CONFIG_NETDEBUG is not set
CONFIG_PACKET=y
CONFIG_PACKET_MMAP=y
CONFIG_UNIX=y
CONFIG_XFRM=y
# CONFIG_XFRM_USER is not set
CONFIG_XFRM_SUB_POLICY=y
CONFIG_NET_KEY=y
CONFIG_INET=y
CONFIG_IP_MULTICAST=y
# CONFIG_IP_ADVANCED_ROUTER is not set
CONFIG_IP_FIB_HASH=y
# CONFIG_IP_PNP is not set
# CONFIG_NET_IPIP is not set
# CONFIG_NET_IPGRE is not set
CONFIG_IP_MROUTE=y
CONFIG_IP_PIMSM_V1=y
CONFIG_IP_PIMSM_V2=y
# CONFIG_ARPD is not set
CONFIG_SYN_COOKIES=y
# CONFIG_INET_AH is not set
# CONFIG_INET_ESP is not set
# CONFIG_INET_IPCOMP is not set
# CONFIG_INET_XFRM_TUNNEL is not set
# CONFIG_INET_TUNNEL is not set
CONFIG_INET_XFRM_MODE_TRANSPORT=y
CONFIG_INET_XFRM_MODE_TUNNEL=y
CONFIG_INET_DIAG=y
CONFIG_INET_TCP_DIAG=y
# CONFIG_TCP_CONG_ADVANCED is not set
CONFIG_TCP_CONG_CUBIC=y
CONFIG_DEFAULT_TCP_CONG="cubic"
# CONFIG_IPV6 is not set
# CONFIG_INET6_XFRM_TUNNEL is not set
# CONFIG_INET6_TUNNEL is not set
CONFIG_NETWORK_SECMARK=y
# CONFIG_NETFILTER is not set

#
# DCCP Configuration (EXPERIMENTAL)
#
# CONFIG_IP_DCCP is not set

#
# SCTP Configuration (EXPERIMENTAL)
#
CONFIG_IP_SCTP=y
# CONFIG_SCTP_DBG_MSG is not set
# CONFIG_SCTP_DBG_OBJCNT is not set
# CONFIG_SCTP_HMAC_NONE is not set
# CONFIG_SCTP_HMAC_SHA1 is not set
CONFIG_SCTP_HMAC_MD5=y

#
# TIPC Configuration (EXPERIMENTAL)
#
# CONFIG_TIPC is not set
# CONFIG_ATM is not set
# CONFIG_BRIDGE is not set
# CONFIG_VLAN_8021Q is not set
# CONFIG_DECNET is not set
# CONFIG_LLC2 is not set
# CONFIG_IPX is not set
# CONFIG_ATALK is not set
# CONFIG_X25 is not set
# CONFIG_LAPB is not set
# CONFIG_ECONET is not set
# CONFIG_WAN_ROUTER is not set

#
# QoS and/or fair queueing
#
# CONFIG_NET_SCHED is not set

#
# Network testing
#
# CONFIG_NET_PKTGEN is not set
# CONFIG_NET_TCPPROBE is not set
# CONFIG_HAMRADIO is not set
# CONFIG_IRDA is not set
# CONFIG_BT is not set
# CONFIG_IEEE80211 is not set

#
# Device Drivers
#

#
# Generic Driver Options
#
# CONFIG_STANDALONE is not set
# CONFIG_PREVENT_FIRMWARE_BUILD is not set
CONFIG_FW_LOADER=y
# CONFIG_DEBUG_DRIVER is not set
# CONFIG_SYS_HYPERVISOR is not set

#
# Connector - unified userspace <-> kernelspace linker
#
CONFIG_CONNECTOR=y
CONFIG_PROC_EVENTS=y

#
# Memory Technology Devices (MTD)
#
# CONFIG_MTD is not set

#
# Parallel port support
#
CONFIG_PARPORT=y
CONFIG_PARPORT_PC=y
# CONFIG_PARPORT_SERIAL is not set
CONFIG_PARPORT_PC_FIFO=y
# CONFIG_PARPORT_PC_SUPERIO is not set
# CONFIG_PARPORT_GSC is not set
# CONFIG_PARPORT_AX88796 is not set
CONFIG_PARPORT_1284=y

#
# Plug and Play support
#
CONFIG_PNP=y
# CONFIG_PNP_DEBUG is not set

#
# Protocols
#
CONFIG_PNPACPI=y

#
# Block devices
#
# CONFIG_BLK_DEV_FD is not set
# CONFIG_PARIDE is not set
# CONFIG_BLK_CPQ_DA is not set
# CONFIG_BLK_CPQ_CISS_DA is not set
# CONFIG_BLK_DEV_DAC960 is not set
# CONFIG_BLK_DEV_UMEM is not set
# CONFIG_BLK_DEV_COW_COMMON is not set
CONFIG_BLK_DEV_LOOP=y
CONFIG_BLK_DEV_CRYPTOLOOP=y
# CONFIG_BLK_DEV_NBD is not set
# CONFIG_BLK_DEV_SX8 is not set
# CONFIG_BLK_DEV_UB is not set
CONFIG_BLK_DEV_RAM=y
CONFIG_BLK_DEV_RAM_COUNT=16
CONFIG_BLK_DEV_RAM_SIZE=8192
CONFIG_BLK_DEV_RAM_BLOCKSIZE=1024
CONFIG_BLK_DEV_INITRD=y
CONFIG_CDROM_PKTCDVD=y
CONFIG_CDROM_PKTCDVD_BUFFERS=8
# CONFIG_CDROM_PKTCDVD_WCACHE is not set
# CONFIG_ATA_OVER_ETH is not set

#
# ATA/ATAPI/MFM/RLL support
#
CONFIG_IDE=y
CONFIG_BLK_DEV_IDE=y

#
# Please see Documentation/ide.txt for help/info on IDE drives
#
# CONFIG_BLK_DEV_IDE_SATA is not set
# CONFIG_BLK_DEV_HD_IDE is not set
CONFIG_BLK_DEV_IDEDISK=y
# CONFIG_IDEDISK_MULTI_MODE is not set
CONFIG_BLK_DEV_IDECD=y
# CONFIG_BLK_DEV_IDETAPE is not set
# CONFIG_BLK_DEV_IDEFLOPPY is not set
CONFIG_BLK_DEV_IDESCSI=y
CONFIG_IDE_TASK_IOCTL=y

#
# IDE chipset support/bugfixes
#
# CONFIG_IDE_GENERIC is not set
# CONFIG_BLK_DEV_CMD640 is not set
CONFIG_BLK_DEV_IDEPNP=y
CONFIG_BLK_DEV_IDEPCI=y
CONFIG_IDEPCI_SHARE_IRQ=y
# CONFIG_BLK_DEV_OFFBOARD is not set
CONFIG_BLK_DEV_GENERIC=y
# CONFIG_BLK_DEV_OPTI621 is not set
# CONFIG_BLK_DEV_RZ1000 is not set
CONFIG_BLK_DEV_IDEDMA_PCI=y
# CONFIG_BLK_DEV_IDEDMA_FORCED is not set
CONFIG_IDEDMA_PCI_AUTO=y
# CONFIG_IDEDMA_ONLYDISK is not set
# CONFIG_BLK_DEV_AEC62XX is not set
# CONFIG_BLK_DEV_ALI15X3 is not set
# CONFIG_BLK_DEV_AMD74XX is not set
# CONFIG_BLK_DEV_ATIIXP is not set
# CONFIG_BLK_DEV_CMD64X is not set
# CONFIG_BLK_DEV_TRIFLEX is not set
# CONFIG_BLK_DEV_CY82C693 is not set
# CONFIG_BLK_DEV_CS5520 is not set
# CONFIG_BLK_DEV_CS5530 is not set
# CONFIG_BLK_DEV_HPT34X is not set
# CONFIG_BLK_DEV_HPT366 is not set
# CONFIG_BLK_DEV_SC1200 is not set
CONFIG_BLK_DEV_PIIX=y
# CONFIG_BLK_DEV_IT821X is not set
# CONFIG_BLK_DEV_NS87415 is not set
# CONFIG_BLK_DEV_PDC202XX_OLD is not set
# CONFIG_BLK_DEV_PDC202XX_NEW is not set
# CONFIG_BLK_DEV_SVWKS is not set
CONFIG_BLK_DEV_SIIMAGE=y
# CONFIG_BLK_DEV_SIS5513 is not set
# CONFIG_BLK_DEV_SLC90E66 is not set
# CONFIG_BLK_DEV_TRM290 is not set
# CONFIG_BLK_DEV_VIA82CXXX is not set
# CONFIG_IDE_ARM is not set
CONFIG_BLK_DEV_IDEDMA=y
# CONFIG_IDEDMA_IVB is not set
CONFIG_IDEDMA_AUTO=y
# CONFIG_BLK_DEV_HD is not set

#
# SCSI device support
#
CONFIG_RAID_ATTRS=y
CONFIG_SCSI=y
# CONFIG_SCSI_NETLINK is not set
CONFIG_SCSI_PROC_FS=y

#
# SCSI support type (disk, tape, CD-ROM)
#
CONFIG_BLK_DEV_SD=y
# CONFIG_CHR_DEV_ST is not set
# CONFIG_CHR_DEV_OSST is not set
# CONFIG_BLK_DEV_SR is not set
CONFIG_CHR_DEV_SG=y
# CONFIG_CHR_DEV_SCH is not set

#
# Some SCSI devices (e.g. CD jukebox) support multiple LUNs
#
CONFIG_SCSI_MULTI_LUN=y
CONFIG_SCSI_CONSTANTS=y
CONFIG_SCSI_LOGGING=y

#
# SCSI Transports
#
# CONFIG_SCSI_SPI_ATTRS is not set
# CONFIG_SCSI_FC_ATTRS is not set
# CONFIG_SCSI_ISCSI_ATTRS is not set
# CONFIG_SCSI_SAS_ATTRS is not set
# CONFIG_SCSI_SAS_LIBSAS is not set

#
# SCSI low-level drivers
#
# CONFIG_ISCSI_TCP is not set
# CONFIG_BLK_DEV_3W_XXXX_RAID is not set
# CONFIG_SCSI_3W_9XXX is not set
# CONFIG_SCSI_ACARD is not set
# CONFIG_SCSI_AACRAID is not set
# CONFIG_SCSI_AIC7XXX is not set
# CONFIG_SCSI_AIC7XXX_OLD is not set
# CONFIG_SCSI_AIC79XX is not set
# CONFIG_SCSI_AIC94XX is not set
# CONFIG_SCSI_ARCMSR is not set
# CONFIG_MEGARAID_NEWGEN is not set
# CONFIG_MEGARAID_LEGACY is not set
# CONFIG_MEGARAID_SAS is not set
# CONFIG_SCSI_HPTIOP is not set
# CONFIG_SCSI_BUSLOGIC is not set
# CONFIG_SCSI_DMX3191D is not set
CONFIG_SCSI_EATA=y
CONFIG_SCSI_EATA_TAGGED_QUEUE=y
CONFIG_SCSI_EATA_LINKED_COMMANDS=y
CONFIG_SCSI_EATA_MAX_TAGS=16
# CONFIG_SCSI_FUTURE_DOMAIN is not set
# CONFIG_SCSI_GDTH is not set
# CONFIG_SCSI_IPS is not set
# CONFIG_SCSI_INITIO is not set
# CONFIG_SCSI_INIA100 is not set
# CONFIG_SCSI_PPA is not set
# CONFIG_SCSI_IMM is not set
# CONFIG_SCSI_STEX is not set
# CONFIG_SCSI_SYM53C8XX_2 is not set
# CONFIG_SCSI_IPR is not set
# CONFIG_SCSI_QLOGIC_1280 is not set
# CONFIG_SCSI_QLA_FC is not set
# CONFIG_SCSI_LPFC is not set
# CONFIG_SCSI_DC395x is not set
# CONFIG_SCSI_DC390T is not set
# CONFIG_SCSI_DEBUG is not set

#
# Serial ATA (prod) and Parallel ATA (experimental) drivers
#
CONFIG_ATA=y
CONFIG_SATA_AHCI=y
# CONFIG_SATA_SVW is not set
CONFIG_ATA_PIIX=y
# CONFIG_SATA_MV is not set
# CONFIG_SATA_NV is not set
# CONFIG_PDC_ADMA is not set
# CONFIG_SATA_QSTOR is not set
CONFIG_SATA_PROMISE=y
# CONFIG_SATA_SX4 is not set
# CONFIG_SATA_SIL is not set
# CONFIG_SATA_SIL24 is not set
# CONFIG_SATA_SIS is not set
# CONFIG_SATA_ULI is not set
# CONFIG_SATA_VIA is not set
# CONFIG_SATA_VITESSE is not set
CONFIG_SATA_INTEL_COMBINED=y
# CONFIG_PATA_ALI is not set
# CONFIG_PATA_AMD is not set
# CONFIG_PATA_ARTOP is not set
# CONFIG_PATA_ATIIXP is not set
# CONFIG_PATA_CMD64X is not set
# CONFIG_PATA_CS5520 is not set
# CONFIG_PATA_CS5530 is not set
# CONFIG_PATA_CYPRESS is not set
# CONFIG_PATA_EFAR is not set
CONFIG_ATA_GENERIC=y
# CONFIG_PATA_HPT366 is not set
# CONFIG_PATA_HPT37X is not set
# CONFIG_PATA_HPT3X2N is not set
# CONFIG_PATA_HPT3X3 is not set
# CONFIG_PATA_IT821X is not set
CONFIG_PATA_JMICRON=y
# CONFIG_PATA_TRIFLEX is not set
CONFIG_PATA_MPIIX=y
# CONFIG_PATA_OLDPIIX is not set
# CONFIG_PATA_NETCELL is not set
# CONFIG_PATA_NS87410 is not set
# CONFIG_PATA_OPTI is not set
# CONFIG_PATA_OPTIDMA is not set
# CONFIG_PATA_PDC_OLD is not set
# CONFIG_PATA_RADISYS is not set
# CONFIG_PATA_RZ1000 is not set
# CONFIG_PATA_SC1200 is not set
# CONFIG_PATA_SERVERWORKS is not set
# CONFIG_PATA_PDC2027X is not set
# CONFIG_PATA_SIL680 is not set
# CONFIG_PATA_SIS is not set
# CONFIG_PATA_VIA is not set
# CONFIG_PATA_WINBOND is not set

#
# Multi-device support (RAID and LVM)
#
# CONFIG_MD is not set

#
# Fusion MPT device support
#
# CONFIG_FUSION is not set
# CONFIG_FUSION_SPI is not set
# CONFIG_FUSION_FC is not set
# CONFIG_FUSION_SAS is not set

#
# IEEE 1394 (FireWire) support
#
# CONFIG_IEEE1394 is not set

#
# I2O device support
#
# CONFIG_I2O is not set

#
# Network device support
#
CONFIG_NETDEVICES=y
CONFIG_DUMMY=y
# CONFIG_BONDING is not set
# CONFIG_EQUALIZER is not set
# CONFIG_TUN is not set
# CONFIG_NET_SB1000 is not set

#
# ARCnet devices
#
# CONFIG_ARCNET is not set

#
# PHY device support
#

#
# Ethernet (10 or 100Mbit)
#
# CONFIG_NET_ETHERNET is not set

#
# Ethernet (1000 Mbit)
#
# CONFIG_ACENIC is not set
# CONFIG_DL2K is not set
# CONFIG_E1000 is not set
# CONFIG_NS83820 is not set
# CONFIG_HAMACHI is not set
# CONFIG_YELLOWFIN is not set
# CONFIG_R8169 is not set
# CONFIG_SIS190 is not set
# CONFIG_SKGE is not set
CONFIG_SKY2=y
# CONFIG_SK98LIN is not set
# CONFIG_TIGON3 is not set
# CONFIG_BNX2 is not set
# CONFIG_QLA3XXX is not set

#
# Ethernet (10000 Mbit)
#
# CONFIG_CHELSIO_T1 is not set
# CONFIG_IXGB is not set
# CONFIG_S2IO is not set
# CONFIG_MYRI10GE is not set

#
# Token Ring devices
#
# CONFIG_TR is not set

#
# Wireless LAN (non-hamradio)
#
# CONFIG_NET_RADIO is not set

#
# Wan interfaces
#
# CONFIG_WAN is not set
# CONFIG_FDDI is not set
# CONFIG_HIPPI is not set
# CONFIG_PLIP is not set
# CONFIG_PPP is not set
# CONFIG_SLIP is not set
# CONFIG_NET_FC is not set
# CONFIG_SHAPER is not set
CONFIG_NETCONSOLE=y
CONFIG_NETPOLL=y
# CONFIG_NETPOLL_RX is not set
# CONFIG_NETPOLL_TRAP is not set
CONFIG_NET_POLL_CONTROLLER=y

#
# ISDN subsystem
#
# CONFIG_ISDN is not set

#
# Telephony Support
#
# CONFIG_PHONE is not set

#
# Input device support
#
CONFIG_INPUT=y

#
# Userland interfaces
#
CONFIG_INPUT_MOUSEDEV=y
CONFIG_INPUT_MOUSEDEV_PSAUX=y
CONFIG_INPUT_MOUSEDEV_SCREEN_X=1280
CONFIG_INPUT_MOUSEDEV_SCREEN_Y=1024
# CONFIG_INPUT_JOYDEV is not set
# CONFIG_INPUT_TSDEV is not set
CONFIG_INPUT_EVDEV=y
# CONFIG_INPUT_EVBUG is not set

#
# Input Device Drivers
#
CONFIG_INPUT_KEYBOARD=y
CONFIG_KEYBOARD_ATKBD=y
# CONFIG_KEYBOARD_SUNKBD is not set
# CONFIG_KEYBOARD_LKKBD is not set
CONFIG_KEYBOARD_XTKBD=y
# CONFIG_KEYBOARD_NEWTON is not set
CONFIG_INPUT_MOUSE=y
CONFIG_MOUSE_PS2=y
# CONFIG_MOUSE_SERIAL is not set
# CONFIG_MOUSE_VSXXXAA is not set
# CONFIG_INPUT_JOYSTICK is not set
# CONFIG_INPUT_TOUCHSCREEN is not set
# CONFIG_INPUT_MISC is not set

#
# Hardware I/O ports
#
CONFIG_SERIO=y
CONFIG_SERIO_I8042=y
CONFIG_SERIO_SERPORT=y
CONFIG_SERIO_CT82C710=y
# CONFIG_SERIO_PARKBD is not set
CONFIG_SERIO_PCIPS2=y
CONFIG_SERIO_LIBPS2=y
CONFIG_SERIO_RAW=y
# CONFIG_GAMEPORT is not set

#
# Character devices
#
CONFIG_VT=y
CONFIG_VT_CONSOLE=y
CONFIG_HW_CONSOLE=y
# CONFIG_VT_HW_CONSOLE_BINDING is not set
# CONFIG_SERIAL_NONSTANDARD is not set

#
# Serial drivers
#
CONFIG_SERIAL_8250=y
CONFIG_SERIAL_8250_CONSOLE=y
CONFIG_SERIAL_8250_PCI=y
CONFIG_SERIAL_8250_PNP=y
CONFIG_SERIAL_8250_NR_UARTS=4
CONFIG_SERIAL_8250_RUNTIME_UARTS=4
CONFIG_SERIAL_8250_EXTENDED=y
CONFIG_SERIAL_8250_MANY_PORTS=y
CONFIG_SERIAL_8250_SHARE_IRQ=y
# CONFIG_SERIAL_8250_DETECT_IRQ is not set
CONFIG_SERIAL_8250_RSA=y

#
# Non-8250 serial port support
#
CONFIG_SERIAL_CORE=y
CONFIG_SERIAL_CORE_CONSOLE=y
# CONFIG_SERIAL_JSM is not set
CONFIG_UNIX98_PTYS=y
CONFIG_LEGACY_PTYS=y
CONFIG_LEGACY_PTY_COUNT=256
CONFIG_PRINTER=y
# CONFIG_LP_CONSOLE is not set
CONFIG_PPDEV=y
# CONFIG_TIPAR is not set

#
# IPMI
#
# CONFIG_IPMI_HANDLER is not set

#
# Watchdog Cards
#
# CONFIG_WATCHDOG is not set
# CONFIG_HW_RANDOM is not set
CONFIG_NVRAM=y
CONFIG_RTC=y
# CONFIG_DTLK is not set
# CONFIG_R3964 is not set
# CONFIG_APPLICOM is not set

#
# Ftape, the floppy tape device driver
#
CONFIG_AGP=y
CONFIG_AGP_AMD64=y
CONFIG_AGP_INTEL=y
# CONFIG_AGP_SIS is not set
# CONFIG_AGP_VIA is not set
CONFIG_DRM=y
# CONFIG_DRM_TDFX is not set
# CONFIG_DRM_R128 is not set
# CONFIG_DRM_RADEON is not set
# CONFIG_DRM_I810 is not set
# CONFIG_DRM_I830 is not set
# CONFIG_DRM_I915 is not set
# CONFIG_DRM_MGA is not set
# CONFIG_DRM_SIS is not set
# CONFIG_DRM_VIA is not set
# CONFIG_DRM_SAVAGE is not set
# CONFIG_MWAVE is not set
# CONFIG_PC8736x_GPIO is not set
# CONFIG_RAW_DRIVER is not set
CONFIG_HPET=y
# CONFIG_HPET_RTC_IRQ is not set
CONFIG_HPET_MMAP=y
CONFIG_HANGCHECK_TIMER=y

#
# TPM devices
#
# CONFIG_TCG_TPM is not set
# CONFIG_TELCLOCK is not set

#
# I2C support
#
# CONFIG_I2C is not set

#
# SPI support
#
# CONFIG_SPI is not set
# CONFIG_SPI_MASTER is not set

#
# Dallas's 1-wire bus
#
# CONFIG_W1 is not set

#
# Hardware Monitoring support
#
# CONFIG_HWMON is not set
# CONFIG_HWMON_VID is not set

#
# Misc devices
#
# CONFIG_IBM_ASM is not set

#
# Multimedia devices
#
# CONFIG_VIDEO_DEV is not set
CONFIG_VIDEO_V4L2=y

#
# Digital Video Broadcasting Devices
#
# CONFIG_DVB is not set
# CONFIG_USB_DABUSB is not set

#
# Graphics support
#
CONFIG_FIRMWARE_EDID=y
# CONFIG_FB is not set

#
# Console display driver support
#
CONFIG_VGA_CONSOLE=y
CONFIG_VGACON_SOFT_SCROLLBACK=y
CONFIG_VGACON_SOFT_SCROLLBACK_SIZE=64
CONFIG_VIDEO_SELECT=y
CONFIG_DUMMY_CONSOLE=y
# CONFIG_BACKLIGHT_LCD_SUPPORT is not set

#
# Sound
#
# CONFIG_SOUND is not set

#
# USB support
#
CONFIG_USB_ARCH_HAS_HCD=y
CONFIG_USB_ARCH_HAS_OHCI=y
CONFIG_USB_ARCH_HAS_EHCI=y
CONFIG_USB=y
# CONFIG_USB_DEBUG is not set

#
# Miscellaneous USB options
#
CONFIG_USB_DEVICEFS=y
# CONFIG_USB_BANDWIDTH is not set
# CONFIG_USB_DYNAMIC_MINORS is not set
CONFIG_USB_SUSPEND=y
# CONFIG_USB_OTG is not set

#
# USB Host Controller Drivers
#
CONFIG_USB_EHCI_HCD=y
CONFIG_USB_EHCI_SPLIT_ISO=y
CONFIG_USB_EHCI_ROOT_HUB_TT=y
CONFIG_USB_EHCI_TT_NEWSCHED=y
# CONFIG_USB_ISP116X_HCD is not set
CONFIG_USB_OHCI_HCD=y
# CONFIG_USB_OHCI_BIG_ENDIAN is not set
CONFIG_USB_OHCI_LITTLE_ENDIAN=y
CONFIG_USB_UHCI_HCD=y
# CONFIG_USB_SL811_HCD is not set

#
# USB Device Class drivers
#
# CONFIG_USB_ACM is not set
# CONFIG_USB_PRINTER is not set

#
# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
#

#
# may also be needed; see USB_STORAGE Help for more information
#
# CONFIG_USB_STORAGE is not set
# CONFIG_USB_LIBUSUAL is not set

#
# USB Input Devices
#
CONFIG_USB_HID=y
CONFIG_USB_HIDINPUT=y
# CONFIG_USB_HIDINPUT_POWERBOOK is not set
# CONFIG_HID_FF is not set
CONFIG_USB_HIDDEV=y
# CONFIG_USB_AIPTEK is not set
# CONFIG_USB_WACOM is not set
# CONFIG_USB_ACECAD is not set
# CONFIG_USB_KBTAB is not set
# CONFIG_USB_POWERMATE is not set
# CONFIG_USB_TOUCHSCREEN is not set
# CONFIG_USB_YEALINK is not set
# CONFIG_USB_XPAD is not set
# CONFIG_USB_ATI_REMOTE is not set
# CONFIG_USB_ATI_REMOTE2 is not set
# CONFIG_USB_KEYSPAN_REMOTE is not set
# CONFIG_USB_APPLETOUCH is not set
# CONFIG_USB_TRANCEVIBRATOR is not set

#
# USB Imaging devices
#
# CONFIG_USB_MDC800 is not set
# CONFIG_USB_MICROTEK is not set

#
# USB Network Adapters
#
# CONFIG_USB_CATC is not set
# CONFIG_USB_KAWETH is not set
# CONFIG_USB_PEGASUS is not set
# CONFIG_USB_RTL8150 is not set
# CONFIG_USB_USBNET is not set
# CONFIG_USB_MON is not set

#
# USB port drivers
#
# CONFIG_USB_USS720 is not set

#
# USB Serial Converter support
#
# CONFIG_USB_SERIAL is not set

#
# USB Miscellaneous drivers
#
# CONFIG_USB_EMI62 is not set
# CONFIG_USB_EMI26 is not set
# CONFIG_USB_ADUTUX is not set
# CONFIG_USB_AUERSWALD is not set
# CONFIG_USB_RIO500 is not set
# CONFIG_USB_LEGOTOWER is not set
# CONFIG_USB_LCD is not set
# CONFIG_USB_LED is not set
# CONFIG_USB_CYPRESS_CY7C63 is not set
# CONFIG_USB_CYTHERM is not set
# CONFIG_USB_PHIDGET is not set
# CONFIG_USB_IDMOUSE is not set
# CONFIG_USB_FTDI_ELAN is not set
# CONFIG_USB_APPLEDISPLAY is not set
# CONFIG_USB_SISUSBVGA is not set
# CONFIG_USB_LD is not set
# CONFIG_USB_TEST is not set

#
# USB DSL modem support
#

#
# USB Gadget Support
#
# CONFIG_USB_GADGET is not set

#
# MMC/SD Card support
#
# CONFIG_MMC is not set

#
# LED devices
#
# CONFIG_NEW_LEDS is not set

#
# LED drivers
#

#
# LED Triggers
#

#
# InfiniBand support
#
# CONFIG_INFINIBAND is not set

#
# EDAC - error detection and reporting (RAS) (EXPERIMENTAL)
#
# CONFIG_EDAC is not set

#
# Real Time Clock
#
CONFIG_RTC_LIB=y
CONFIG_RTC_CLASS=y
CONFIG_RTC_HCTOSYS=y
CONFIG_RTC_HCTOSYS_DEVICE="rtc0"
# CONFIG_RTC_DEBUG is not set

#
# RTC interfaces
#
CONFIG_RTC_INTF_SYSFS=y
CONFIG_RTC_INTF_PROC=y
CONFIG_RTC_INTF_DEV=y
# CONFIG_RTC_INTF_DEV_UIE_EMUL is not set

#
# RTC drivers
#
# CONFIG_RTC_DRV_DS1553 is not set
# CONFIG_RTC_DRV_DS1742 is not set
# CONFIG_RTC_DRV_M48T86 is not set
# CONFIG_RTC_DRV_TEST is not set
# CONFIG_RTC_DRV_V3020 is not set

#
# DMA Engine support
#
CONFIG_DMA_ENGINE=y

#
# DMA Clients
#
CONFIG_NET_DMA=y

#
# DMA Devices
#
CONFIG_INTEL_IOATDMA=y

#
# Firmware Drivers
#
# CONFIG_EDD is not set
# CONFIG_DELL_RBU is not set
# CONFIG_DCDBAS is not set

#
# File systems
#
CONFIG_EXT2_FS=y
CONFIG_EXT2_FS_XATTR=y
CONFIG_EXT2_FS_POSIX_ACL=y
CONFIG_EXT2_FS_SECURITY=y
# CONFIG_EXT2_FS_XIP is not set
CONFIG_EXT3_FS=y
CONFIG_EXT3_FS_XATTR=y
CONFIG_EXT3_FS_POSIX_ACL=y
CONFIG_EXT3_FS_SECURITY=y
CONFIG_JBD=y
# CONFIG_JBD_DEBUG is not set
CONFIG_FS_MBCACHE=y
CONFIG_REISERFS_FS=y
# CONFIG_REISERFS_CHECK is not set
# CONFIG_REISERFS_PROC_INFO is not set
CONFIG_REISERFS_FS_XATTR=y
CONFIG_REISERFS_FS_POSIX_ACL=y
CONFIG_REISERFS_FS_SECURITY=y
CONFIG_JFS_FS=y
CONFIG_JFS_POSIX_ACL=y
CONFIG_JFS_SECURITY=y
# CONFIG_JFS_DEBUG is not set
# CONFIG_JFS_STATISTICS is not set
CONFIG_FS_POSIX_ACL=y
CONFIG_XFS_FS=y
CONFIG_XFS_QUOTA=y
# CONFIG_XFS_SECURITY is not set
CONFIG_XFS_POSIX_ACL=y
# CONFIG_XFS_RT is not set
# CONFIG_OCFS2_FS is not set
# CONFIG_MINIX_FS is not set
CONFIG_ROMFS_FS=y
CONFIG_INOTIFY=y
CONFIG_INOTIFY_USER=y
CONFIG_QUOTA=y
# CONFIG_QFMT_V1 is not set
# CONFIG_QFMT_V2 is not set
CONFIG_QUOTACTL=y
CONFIG_DNOTIFY=y
CONFIG_AUTOFS_FS=y
CONFIG_AUTOFS4_FS=y
CONFIG_FUSE_FS=y

#
# CD-ROM/DVD Filesystems
#
CONFIG_ISO9660_FS=y
CONFIG_JOLIET=y
CONFIG_ZISOFS=y
CONFIG_ZISOFS_FS=y
CONFIG_UDF_FS=y
CONFIG_UDF_NLS=y

#
# DOS/FAT/NT Filesystems
#
CONFIG_FAT_FS=y
CONFIG_MSDOS_FS=y
CONFIG_VFAT_FS=y
CONFIG_FAT_DEFAULT_CODEPAGE=437
CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
# CONFIG_NTFS_FS is not set

#
# Pseudo filesystems
#
CONFIG_PROC_FS=y
CONFIG_PROC_KCORE=y
CONFIG_PROC_SYSCTL=y
CONFIG_SYSFS=y
CONFIG_TMPFS=y
# CONFIG_TMPFS_POSIX_ACL is not set
# CONFIG_HUGETLBFS is not set
# CONFIG_HUGETLB_PAGE is not set
CONFIG_RAMFS=y
CONFIG_CONFIGFS_FS=y

#
# Miscellaneous filesystems
#
# CONFIG_ADFS_FS is not set
# CONFIG_AFFS_FS is not set
# CONFIG_HFS_FS is not set
# CONFIG_HFSPLUS_FS is not set
# CONFIG_BEFS_FS is not set
# CONFIG_BFS_FS is not set
# CONFIG_EFS_FS is not set
CONFIG_CRAMFS=y
# CONFIG_VXFS_FS is not set
# CONFIG_HPFS_FS is not set
# CONFIG_QNX4FS_FS is not set
# CONFIG_SYSV_FS is not set
# CONFIG_UFS_FS is not set

#
# Network File Systems
#
CONFIG_NFS_FS=y
CONFIG_NFS_V3=y
CONFIG_NFS_V3_ACL=y
CONFIG_NFS_V4=y
CONFIG_NFS_DIRECTIO=y
CONFIG_NFSD=y
CONFIG_NFSD_V2_ACL=y
CONFIG_NFSD_V3=y
CONFIG_NFSD_V3_ACL=y
CONFIG_NFSD_V4=y
CONFIG_NFSD_TCP=y
CONFIG_LOCKD=y
CONFIG_LOCKD_V4=y
CONFIG_EXPORTFS=y
CONFIG_NFS_ACL_SUPPORT=y
CONFIG_NFS_COMMON=y
CONFIG_SUNRPC=y
CONFIG_SUNRPC_GSS=y
CONFIG_RPCSEC_GSS_KRB5=y
# CONFIG_RPCSEC_GSS_SPKM3 is not set
CONFIG_SMB_FS=y
# CONFIG_SMB_NLS_DEFAULT is not set
CONFIG_CIFS=y
# CONFIG_CIFS_STATS is not set
# CONFIG_CIFS_WEAK_PW_HASH is not set
# CONFIG_CIFS_XATTR is not set
# CONFIG_CIFS_DEBUG2 is not set
# CONFIG_CIFS_EXPERIMENTAL is not set
# CONFIG_NCP_FS is not set
# CONFIG_CODA_FS is not set
# CONFIG_AFS_FS is not set
# CONFIG_9P_FS is not set

#
# Partition Types
#
CONFIG_PARTITION_ADVANCED=y
CONFIG_ACORN_PARTITION=y
# CONFIG_ACORN_PARTITION_CUMANA is not set
# CONFIG_ACORN_PARTITION_EESOX is not set
CONFIG_ACORN_PARTITION_ICS=y
# CONFIG_ACORN_PARTITION_ADFS is not set
# CONFIG_ACORN_PARTITION_POWERTEC is not set
CONFIG_ACORN_PARTITION_RISCIX=y
CONFIG_OSF_PARTITION=y
CONFIG_AMIGA_PARTITION=y
CONFIG_ATARI_PARTITION=y
CONFIG_MAC_PARTITION=y
CONFIG_MSDOS_PARTITION=y
CONFIG_BSD_DISKLABEL=y
CONFIG_MINIX_SUBPARTITION=y
CONFIG_SOLARIS_X86_PARTITION=y
CONFIG_UNIXWARE_DISKLABEL=y
CONFIG_LDM_PARTITION=y
# CONFIG_LDM_DEBUG is not set
CONFIG_SGI_PARTITION=y
CONFIG_ULTRIX_PARTITION=y
CONFIG_SUN_PARTITION=y
CONFIG_KARMA_PARTITION=y
CONFIG_EFI_PARTITION=y

#
# Native Language Support
#
CONFIG_NLS=y
CONFIG_NLS_DEFAULT="iso8859-1"
# CONFIG_NLS_CODEPAGE_437 is not set
# CONFIG_NLS_CODEPAGE_737 is not set
# CONFIG_NLS_CODEPAGE_775 is not set
# CONFIG_NLS_CODEPAGE_850 is not set
# CONFIG_NLS_CODEPAGE_852 is not set
# CONFIG_NLS_CODEPAGE_855 is not set
# CONFIG_NLS_CODEPAGE_857 is not set
# CONFIG_NLS_CODEPAGE_860 is not set
# CONFIG_NLS_CODEPAGE_861 is not set
# CONFIG_NLS_CODEPAGE_862 is not set
# CONFIG_NLS_CODEPAGE_863 is not set
# CONFIG_NLS_CODEPAGE_864 is not set
# CONFIG_NLS_CODEPAGE_865 is not set
# CONFIG_NLS_CODEPAGE_866 is not set
# CONFIG_NLS_CODEPAGE_869 is not set
# CONFIG_NLS_CODEPAGE_936 is not set
# CONFIG_NLS_CODEPAGE_950 is not set
# CONFIG_NLS_CODEPAGE_932 is not set
# CONFIG_NLS_CODEPAGE_949 is not set
# CONFIG_NLS_CODEPAGE_874 is not set
# CONFIG_NLS_ISO8859_8 is not set
# CONFIG_NLS_CODEPAGE_1250 is not set
# CONFIG_NLS_CODEPAGE_1251 is not set
CONFIG_NLS_ASCII=y
# CONFIG_NLS_ISO8859_1 is not set
# CONFIG_NLS_ISO8859_2 is not set
# CONFIG_NLS_ISO8859_3 is not set
# CONFIG_NLS_ISO8859_4 is not set
# CONFIG_NLS_ISO8859_5 is not set
# CONFIG_NLS_ISO8859_6 is not set
# CONFIG_NLS_ISO8859_7 is not set
# CONFIG_NLS_ISO8859_9 is not set
# CONFIG_NLS_ISO8859_13 is not set
# CONFIG_NLS_ISO8859_14 is not set
# CONFIG_NLS_ISO8859_15 is not set
# CONFIG_NLS_KOI8_R is not set
# CONFIG_NLS_KOI8_U is not set
CONFIG_NLS_UTF8=y

#
# Instrumentation Support
#
CONFIG_PROFILING=y
CONFIG_OPROFILE=y
CONFIG_KPROBES=y

#
# Kernel hacking
#
CONFIG_TRACE_IRQFLAGS_SUPPORT=y
CONFIG_PRINTK_TIME=y
CONFIG_ENABLE_MUST_CHECK=y
CONFIG_MAGIC_SYSRQ=y
# CONFIG_UNUSED_SYMBOLS is not set
CONFIG_DEBUG_KERNEL=y
CONFIG_LOG_BUF_SHIFT=15
# CONFIG_DETECT_SOFTLOCKUP is not set
# CONFIG_SCHEDSTATS is not set
# CONFIG_DEBUG_SLAB is not set
# CONFIG_DEBUG_RT_MUTEXES is not set
# CONFIG_RT_MUTEX_TESTER is not set
# CONFIG_DEBUG_SPINLOCK is not set
# CONFIG_DEBUG_MUTEXES is not set
# CONFIG_DEBUG_RWSEMS is not set
# CONFIG_DEBUG_LOCK_ALLOC is not set
# CONFIG_PROVE_LOCKING is not set
# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
# CONFIG_DEBUG_KOBJECT is not set
# CONFIG_DEBUG_INFO is not set
# CONFIG_DEBUG_FS is not set
# CONFIG_DEBUG_VM is not set
# CONFIG_DEBUG_LIST is not set
# CONFIG_FRAME_POINTER is not set
# CONFIG_UNWIND_INFO is not set
CONFIG_FORCED_INLINING=y
# CONFIG_RCU_TORTURE_TEST is not set
# CONFIG_DEBUG_RODATA is not set
# CONFIG_IOMMU_DEBUG is not set
# CONFIG_DEBUG_STACKOVERFLOW is not set
# CONFIG_DEBUG_STACK_USAGE is not set

#
# Security options
#
CONFIG_KEYS=y
CONFIG_KEYS_DEBUG_PROC_KEYS=y
# CONFIG_SECURITY is not set

#
# Cryptographic options
#
CONFIG_CRYPTO=y
CONFIG_CRYPTO_ALGAPI=y
CONFIG_CRYPTO_HASH=y
CONFIG_CRYPTO_MANAGER=y
CONFIG_CRYPTO_HMAC=y
CONFIG_CRYPTO_NULL=y
CONFIG_CRYPTO_MD4=y
CONFIG_CRYPTO_MD5=y
CONFIG_CRYPTO_SHA1=y
# CONFIG_CRYPTO_SHA256 is not set
# CONFIG_CRYPTO_SHA512 is not set
# CONFIG_CRYPTO_WP512 is not set
# CONFIG_CRYPTO_TGR192 is not set
# CONFIG_CRYPTO_ECB is not set
# CONFIG_CRYPTO_CBC is not set
CONFIG_CRYPTO_DES=y
# CONFIG_CRYPTO_BLOWFISH is not set
# CONFIG_CRYPTO_TWOFISH is not set
# CONFIG_CRYPTO_TWOFISH_X86_64 is not set
# CONFIG_CRYPTO_SERPENT is not set
CONFIG_CRYPTO_AES=y
CONFIG_CRYPTO_AES_X86_64=y
CONFIG_CRYPTO_CAST5=y
# CONFIG_CRYPTO_CAST6 is not set
# CONFIG_CRYPTO_TEA is not set
# CONFIG_CRYPTO_ARC4 is not set
# CONFIG_CRYPTO_KHAZAD is not set
# CONFIG_CRYPTO_ANUBIS is not set
# CONFIG_CRYPTO_DEFLATE is not set
# CONFIG_CRYPTO_MICHAEL_MIC is not set
# CONFIG_CRYPTO_CRC32C is not set
# CONFIG_CRYPTO_TEST is not set

#
# Hardware crypto devices
#

#
# Library routines
#
CONFIG_CRC_CCITT=y
CONFIG_CRC16=y
CONFIG_CRC32=y
CONFIG_LIBCRC32C=y
CONFIG_ZLIB_INFLATE=y
CONFIG_PLIST=y


Attachments:
config-w6 (29.49 kB)

2006-10-03 16:37:23

by Wink Saville

[permalink] [raw]
Subject: Re: PCI: BIOS Bug: MCFG area at f0000000 is not E820-reserved with 2.6.18 kernel

Arjan van de Ven wrote:
>
> please please remove "quiet"... that removes any kind of useful debug
> output! It also makes you point at the wrong party for blaming hangs
> on ;)
>

Since using Matthias's .config files as the basis for my .config all
seems to be well. Tonight I will go back and reenable the nvidiafb code
with "quiet" removed and report my findings.

Thank you,

Wink

2006-10-04 16:26:07

by Wink Saville

[permalink] [raw]
Subject: Hang in fb_notifier_call_chain with nvidia framebuffer

Arjan van de Ven wrote:
>
> please please remove "quiet"... that removes any kind of useful debug
> output! It also makes you point at the wrong party for blaming hangs
> on ;)
>
>

Arjan,

Attached in the zip file is:

log-hang1.txt -> log showing hang
cfg-hang1 -> config file for hang condition
cfg-ok -> config file that works
fbmem.c -> Modifications to register_framebuffer

To possibly assist I turned on debugging in nvidia.c and found that it
hung in the call to register_framebuffer. I then added some additional
debug in that routine and it appears the hang occurs in the call to
fb_notifier_call_chain.

Please let me know what else maybe needed.

Cheers,

Wink

My hardware is a Asus P5W DH Deluxe with Intel Core 2 Duo, Intel
975X/ICH7R chip set & e-GeForce nvidia 7600 GT KO video card with 2GB of
ram.

Other info when using config-ok:

wink@winkc2d1:~$ uname -a
Linux winkc2d1 2.6.18-w6 #7 SMP Wed Oct 4 09:13:10 PDT 2006 x86_64 GNU/Linux
wink@winkc2d1:~$ cat /proc/cpuinfo
processor : 0
vendor_id : GenuineIntel
cpu family : 6
model : 15
model name : Intel(R) Core(TM)2 CPU 6600 @ 2.40GHz
stepping : 6
cpu MHz : 2404.168
cache size : 4096 KB
physical id : 0
siblings : 2
core id : 0
cpu cores : 2
fpu : yes
fpu_exception : yes
cpuid level : 10
wp : yes
flags : fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge
mca cmov pat pse36 clflush dts acpi mmx fxsr sse sse2 ss ht tm syscall
nx lm constant_tsc pni monitor ds_cpl vmx est tm2 ssse3 cx16 xtpr lahf_lm
bogomips : 4811.86
clflush size : 64
cache_alignment : 64
address sizes : 36 bits physical, 48 bits virtual
power management:

processor : 1
vendor_id : GenuineIntel
cpu family : 6
model : 15
model name : Intel(R) Core(TM)2 CPU 6600 @ 2.40GHz
stepping : 6
cpu MHz : 2404.168
cache size : 4096 KB
physical id : 0
siblings : 2
core id : 1
cpu cores : 2
fpu : yes
fpu_exception : yes
cpuid level : 10
wp : yes
flags : fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge
mca cmov pat pse36 clflush dts acpi mmx fxsr sse sse2 ss ht tm syscall
nx lm constant_tsc pni monitor ds_cpl vmx est tm2 ssse3 cx16 xtpr lahf_lm
bogomips : 6934.66
clflush size : 64
cache_alignment : 64
address sizes : 36 bits physical, 48 bits virtual
power management:

wink@winkc2d1:~$ cat /proc/meminfo
MemTotal: 2058588 kB
MemFree: 1935192 kB
Buffers: 3496 kB
Cached: 53176 kB
SwapCached: 0 kB
Active: 52032 kB
Inactive: 36804 kB
SwapTotal: 0 kB
SwapFree: 0 kB
Dirty: 1544 kB
Writeback: 0 kB
AnonPages: 32240 kB
Mapped: 14568 kB
Slab: 16012 kB
SReclaimable: 7432 kB
SUnreclaim: 8580 kB
PageTables: 2000 kB
NFS_Unstable: 0 kB
Bounce: 0 kB
CommitLimit: 1029292 kB
Committed_AS: 54388 kB
VmallocTotal: 34359738367 kB
VmallocUsed: 6180 kB
VmallocChunk: 34359732163 kB


Attachments:
nvidiafb-hang1.zip (33.05 kB)

2006-10-05 06:28:32

by Wink Saville

[permalink] [raw]
Subject: 2.6.18 Hang in fb_notifier_call_chain while booting with nvidia framebuffer

My system hangs while booting when the nvidia frame buffer is enabled.

I've attached a zip with:

log-hang1.txt -> log showing hang
cfg-hang1 -> config file for hang condition
cfg-ok -> config file that works
fbmem.c -> Modifications to register_framebuffer

To possibly assist, I turned on debugging in nvidia.c and found that it
hung in the call to register_framebuffer. I then added some additional
debug in that routine and it appears the hang occurs in the call to
fb_notifier_call_chain.

Please let me know what else maybe needed.

Cheers,

Wink

(PS: I previously posted this by replying to a previous email
and that post got buried, so excuse the reposting)


My hardware is a Asus P5W DH Deluxe with Intel Core 2 Duo, Intel
975X/ICH7R chip set & e-GeForce nvidia 7600 GT KO video card with 2GB of
ram.

Other info when using config-ok:

wink@winkc2d1:~$ uname -a
Linux winkc2d1 2.6.18-w6 #7 SMP Wed Oct 4 09:13:10 PDT 2006 x86_64 GNU/Linux
wink@winkc2d1:~$ cat /proc/cpuinfo
processor : 0
vendor_id : GenuineIntel
cpu family : 6
model : 15
model name : Intel(R) Core(TM)2 CPU 6600 @ 2.40GHz
stepping : 6
cpu MHz : 2404.168
cache size : 4096 KB
physical id : 0
siblings : 2
core id : 0
cpu cores : 2
fpu : yes
fpu_exception : yes
cpuid level : 10
wp : yes
flags : fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge
mca cmov pat pse36 clflush dts acpi mmx fxsr sse sse2 ss ht tm syscall
nx lm constant_tsc pni monitor ds_cpl vmx est tm2 ssse3 cx16 xtpr lahf_lm
bogomips : 4811.86
clflush size : 64
cache_alignment : 64
address sizes : 36 bits physical, 48 bits virtual
power management:

processor : 1
vendor_id : GenuineIntel
cpu family : 6
model : 15
model name : Intel(R) Core(TM)2 CPU 6600 @ 2.40GHz
stepping : 6
cpu MHz : 2404.168
cache size : 4096 KB
physical id : 0
siblings : 2
core id : 1
cpu cores : 2
fpu : yes
fpu_exception : yes
cpuid level : 10
wp : yes
flags : fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge
mca cmov pat pse36 clflush dts acpi mmx fxsr sse sse2 ss ht tm syscall
nx lm constant_tsc pni monitor ds_cpl vmx est tm2 ssse3 cx16 xtpr lahf_lm
bogomips : 6934.66
clflush size : 64
cache_alignment : 64
address sizes : 36 bits physical, 48 bits virtual
power management:

wink@winkc2d1:~$ cat /proc/meminfo
MemTotal: 2058588 kB
MemFree: 1935192 kB
Buffers: 3496 kB
Cached: 53176 kB
SwapCached: 0 kB
Active: 52032 kB
Inactive: 36804 kB
SwapTotal: 0 kB
SwapFree: 0 kB
Dirty: 1544 kB
Writeback: 0 kB
AnonPages: 32240 kB
Mapped: 14568 kB
Slab: 16012 kB
SReclaimable: 7432 kB
SUnreclaim: 8580 kB
PageTables: 2000 kB
NFS_Unstable: 0 kB
Bounce: 0 kB
CommitLimit: 1029292 kB
Committed_AS: 54388 kB
VmallocTotal: 34359738367 kB
VmallocUsed: 6180 kB
VmallocChunk: 34359732163 kB



Attachments:
nvidiafb-hang1.zip (33.05 kB)

2006-10-08 06:01:47

by Andrew Morton

[permalink] [raw]
Subject: Re: Hang in fb_notifier_call_chain with nvidia framebuffer

On Wed, 04 Oct 2006 09:26:04 -0700
Wink Saville <[email protected]> wrote:

> Attached in the zip file is:
>
> log-hang1.txt -> log showing hang
> cfg-hang1 -> config file for hang condition
> cfg-ok -> config file that works
> fbmem.c -> Modifications to register_framebuffer
>
> To possibly assist I turned on debugging in nvidia.c and found that it
> hung in the call to register_framebuffer. I then added some additional
> debug in that routine and it appears the hang occurs in the call to
> fb_notifier_call_chain.
>
> Please let me know what else maybe needed.

Please:

- get sysrq working:

set CONFIG_MAGIC_SYSRQ=y, rebuild, reboot
echo 1 > /proc/sys/kernel/sysrq
dmesg -n 8

- make it hang

- Hit alt-sysrq-T

- Send us the resulting output

Thanks.

2006-10-08 08:14:49

by Wink Saville

[permalink] [raw]
Subject: Re: Hang in fb_notifier_call_chain with nvidia framebuffer

Andrew Morton wrote:
> On Wed, 04 Oct 2006 09:26:04 -0700
> Wink Saville <[email protected]> wrote:
>
>> Attached in the zip file is:
>>
>> log-hang1.txt -> log showing hang
>> cfg-hang1 -> config file for hang condition
>> cfg-ok -> config file that works
>> fbmem.c -> Modifications to register_framebuffer
>>
>> To possibly assist I turned on debugging in nvidia.c and found that it
>> hung in the call to register_framebuffer. I then added some additional
>> debug in that routine and it appears the hang occurs in the call to
>> fb_notifier_call_chain.
>>
>> Please let me know what else maybe needed.
>
> Please:
>
> - get sysrq working:
>
> set CONFIG_MAGIC_SYSRQ=y, rebuild, reboot
> echo 1 > /proc/sys/kernel/sysrq
> dmesg -n 8
>
> - make it hang
>
> - Hit alt-sysrq-T
>
> - Send us the resulting output
>
> Thanks.
> -
> To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
> the body of a message to [email protected]
> More majordomo info at http://vger.kernel.org/majordomo-info.html
> Please read the FAQ at http://www.tux.org/lkml/
>

Andrew,

Thank you for the reply, I believe I've found the reason frame buffer doesn't
work on my system, there is a divide by zero occurring at line 157 of
nvGetClocks in ./drivers/video/nvidia/nv_hw.c.

(Note: The screwy output below is due to hacking drivers/serial/8250.c to add two
routines serial_putchar and serial_putchars so that I could make progress looking
for the bug, as printk stopped working at acquire_console_sem called from bind_con_driver.)

Last portion of the output:

@[ 97.643286] take_over_console: call bind_con_driver csw=ffffffff805d8600 first=0, last=62, deflt=1
@[ 97.652521] bind_con_driver: E
@[ 97.655774] bind_con_driver: acquire_console_sem
@1[ 97.660604] acquire_console_sem: drivers/char/vt.c:bind_con_driver:2752
@!2345689abABCDEF<fb_con_init>abcdefghij<nvidiafb_set_par>abcd<nvidia_calc_regs>bdjkl<NVCalcStateExt>acei<nv30UpdateArbitrationSettings>a<nv
GetClocks>N=83 NB=0 freq=27000 M=3 MB=0 P=0

>From the above output we see MB=0 and hence death at line 157:

*MClk = ((N * NB * par->CrystalFreqKHz) / (M * MB)) >> P;

It would seem that my hardware (7600 GT K0) is not supported by the driver?
It should also be noted that there are quite a number of divisions
in the nv_hw.c that have no protection against divide by zeros.


2006-10-08 09:07:26

by Andrew Morton

[permalink] [raw]
Subject: Re: Hang in fb_notifier_call_chain with nvidia framebuffer

On Sun, 08 Oct 2006 01:14:47 -0700
Wink Saville <[email protected]> wrote:

> Andrew Morton wrote:
> > On Wed, 04 Oct 2006 09:26:04 -0700
> > Wink Saville <[email protected]> wrote:
> >
> >> Attached in the zip file is:
> >>
> >> log-hang1.txt -> log showing hang
> >> cfg-hang1 -> config file for hang condition
> >> cfg-ok -> config file that works
> >> fbmem.c -> Modifications to register_framebuffer
> >>
> >> To possibly assist I turned on debugging in nvidia.c and found that it
> >> hung in the call to register_framebuffer. I then added some additional
> >> debug in that routine and it appears the hang occurs in the call to
> >> fb_notifier_call_chain.
> >>
> >> Please let me know what else maybe needed.
> >
> > Please:
> >
> > - get sysrq working:
> >
> > set CONFIG_MAGIC_SYSRQ=y, rebuild, reboot
> > echo 1 > /proc/sys/kernel/sysrq
> > dmesg -n 8
> >
> > - make it hang
> >
> > - Hit alt-sysrq-T
> >
> > - Send us the resulting output
> >
> > Thanks.
> > -
> > To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
> > the body of a message to [email protected]
> > More majordomo info at http://vger.kernel.org/majordomo-info.html
> > Please read the FAQ at http://www.tux.org/lkml/
> >
>
> Andrew,
>
> Thank you for the reply, I believe I've found the reason frame buffer doesn't
> work on my system, there is a divide by zero occurring at line 157 of
> nvGetClocks in ./drivers/video/nvidia/nv_hw.c.
>
> (Note: The screwy output below is due to hacking drivers/serial/8250.c to add two
> routines serial_putchar and serial_putchars so that I could make progress looking
> for the bug, as printk stopped working at acquire_console_sem called from bind_con_driver.)
>
> Last portion of the output:
>
> @[ 97.643286] take_over_console: call bind_con_driver csw=ffffffff805d8600 first=0, last=62, deflt=1
> @[ 97.652521] bind_con_driver: E
> @[ 97.655774] bind_con_driver: acquire_console_sem
> @1[ 97.660604] acquire_console_sem: drivers/char/vt.c:bind_con_driver:2752
> @!2345689abABCDEF<fb_con_init>abcdefghij<nvidiafb_set_par>abcd<nvidia_calc_regs>bdjkl<NVCalcStateExt>acei<nv30UpdateArbitrationSettings>a<nv
> GetClocks>N=83 NB=0 freq=27000 M=3 MB=0 P=0
>
> >From the above output we see MB=0 and hence death at line 157:
>
> *MClk = ((N * NB * par->CrystalFreqKHz) / (M * MB)) >> P;
>
> It would seem that my hardware (7600 GT K0) is not supported by the driver?
> It should also be noted that there are quite a number of divisions
> in the nv_hw.c that have no protection against divide by zeros.

OK. Does the below reversion fix it?

It's a bit sad that printk doesn't work inside console_sem. It's hard to
avoid, really. I suppose we could cheat and let the message through if
oops_in_progress is set. But the fbcon layer is obviously doing too much
stuff inside that lock.



From: Andrew Morton <[email protected]>

Olaf reports that this gave him a black screen.

Cc: Olaf Hering <[email protected]>
Cc: "Antonino A. Daplas" <[email protected]>
Signed-off-by: Andrew Morton <[email protected]>
---

drivers/video/Kconfig | 1
drivers/video/nvidia/nv_i2c.c | 43 ++++++++++++++++++++++++++++++--
2 files changed, 41 insertions(+), 3 deletions(-)

diff -puN drivers/video/Kconfig~revert-nvidiafb-use-generic-ddc-reading drivers/video/Kconfig
--- a/drivers/video/Kconfig~revert-nvidiafb-use-generic-ddc-reading
+++ a/drivers/video/Kconfig
@@ -701,7 +701,6 @@ config FB_NVIDIA
depends on FB && PCI
select I2C_ALGOBIT if FB_NVIDIA_I2C
select I2C if FB_NVIDIA_I2C
- select FB_DDC if FB_NVIDIA_I2C
select FB_MODE_HELPERS
select FB_CFB_FILLRECT
select FB_CFB_COPYAREA
diff -puN drivers/video/nvidia/nv_i2c.c~revert-nvidiafb-use-generic-ddc-reading drivers/video/nvidia/nv_i2c.c
--- a/drivers/video/nvidia/nv_i2c.c~revert-nvidiafb-use-generic-ddc-reading
+++ a/drivers/video/nvidia/nv_i2c.c
@@ -160,12 +160,51 @@ void nvidia_delete_i2c_busses(struct nvi

}

+static u8 *nvidia_do_probe_i2c_edid(struct nvidia_i2c_chan *chan)
+{
+ u8 start = 0x0;
+ struct i2c_msg msgs[] = {
+ {
+ .addr = 0x50,
+ .len = 1,
+ .buf = &start,
+ }, {
+ .addr = 0x50,
+ .flags = I2C_M_RD,
+ .len = EDID_LENGTH,
+ },
+ };
+ u8 *buf;
+
+ if (!chan->par)
+ return NULL;
+
+ buf = kmalloc(EDID_LENGTH, GFP_KERNEL);
+ if (!buf) {
+ dev_warn(&chan->par->pci_dev->dev, "Out of memory!\n");
+ return NULL;
+ }
+ msgs[1].buf = buf;
+
+ if (i2c_transfer(&chan->adapter, msgs, 2) == 2)
+ return buf;
+ dev_dbg(&chan->par->pci_dev->dev, "Unable to read EDID block.\n");
+ kfree(buf);
+ return NULL;
+}
+
int nvidia_probe_i2c_connector(struct fb_info *info, int conn, u8 **out_edid)
{
struct nvidia_par *par = info->par;
- u8 *edid;
+ u8 *edid = NULL;
+ int i;

- edid = fb_ddc_read(&par->chan[conn - 1].adapter);
+ for (i = 0; i < 3; i++) {
+ /* Do the real work */
+ edid = nvidia_do_probe_i2c_edid(&par->chan[conn - 1]);
+ if (edid)
+ break;
+ }

if (!edid && conn == 1) {
/* try to get from firmware */
_

2006-10-08 18:06:33

by Wink Saville

[permalink] [raw]
Subject: Re: Hang in fb_notifier_call_chain with nvidia framebuffer

Andrew,

No change, as you can see MB is still 0.

nvGetClocks: arch=64 p4020=0xa4301000 p4024=0x00005303 M=3 N=83 MB=0 NB=0 P=0

Here is my log, config & diff. Maybe my configuration is wrong? This diff is against 2.6.19-rc1 as checked out this morning.

Thanks,

Wink


<log>
[ 0.000000] Linux version 2.6.19-rc1-w8 (wink@winkc2d1) (gcc
version 4.0.3 (Ubuntu 4.0.3-1ubuntu5)) #4 SMP Sun Oct 8 10:13:36 PDT 2006
[ 0.000000] Command line: root=/dev/sda2 ro splash initcall_debug console=tty0 console=ttyS0,115200n8 loglevel=7
[ 0.000000] BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
[ 0.000000] BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
[ 0.000000] BIOS-e820: 00000000000e4000 - 0000000000100000 (reserved)
[ 0.000000] BIOS-e820: 0000000000100000 - 000000007ff80000 (usable)
[ 0.000000] BIOS-e820: 000000007ff80000 - 000000007ff8e000 (ACPI data)
[ 0.000000] BIOS-e820: 000000007ff8e000 - 000000007ffe0000 (ACPI NVS)
[ 0.000000] BIOS-e820: 000000007ffe0000 - 0000000080000000 (reserved)
[ 0.000000] BIOS-e820: 00000000ffb00000 - 0000000100000000 (reserved)
[ 0.000000] end_pfn_map = 1048576
[ 0.000000] DMI 2.3 present.
[ 0.000000] Zone PFN ranges:
[ 0.000000] DMA 0 -> 4096
[ 0.000000] DMA32 4096 -> 1048576
[ 0.000000] Normal 1048576 -> 1048576
[ 0.000000] early_node_map[2] active PFN ranges
[ 0.000000] 0: 0 -> 159
[ 0.000000] 0: 256 -> 524160
[ 0.000000] ACPI: PM-Timer IO Port: 0x808
[ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
[ 0.000000] Processor #0 (Bootup-CPU)
[ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled)
[ 0.000000] Processor #1
[ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x82] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x83] disabled)
[ 0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
[ 0.000000] IOAPIC[0]: apic_id 2, address 0xfec00000, GSI 0-23
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[ 0.000000] Setting APIC routing to flat
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] Nosave address range: 000000000009f000 - 00000000000a0000
[ 0.000000] Nosave address range: 00000000000a0000 - 00000000000e4000
[ 0.000000] Nosave address range: 00000000000e4000 - 0000000000100000
[ 0.000000] Allocating PCI resources starting at 88000000 (gap: 80000000:7fb00000)
[ 0.000000] PERCPU: Allocating 34048 bytes of per cpu data
[ 0.000000] Built 1 zonelists. Total pages: 515368
[ 0.000000] Kernel command line: root=/dev/sda2 ro splash initcall_debug console=tty0 console=ttyS0,115200n8 loglevel=7
[ 0.000000] Initializing CPU#0
[ 0.000000] PID hash table entries: 4096 (order: 12, 32768 bytes)
[ 38.700028] Console: colour VGA+ 80x25
[ 38.965705] Dentry cache hash table entries: 262144 (order: 9, 2097152 bytes)
[ 38.973543] Inode-cache hash table entries: 131072 (order: 8, 1048576 bytes)
[ 38.981260] Checking aperture...
[ 39.006736] Memory: 2058136k/2096640k available (3833k kernel code, 38088k reserved, 1431k data, 232k init)
[ 39.093936] Calibrating delay using timer specific routine.. 4811.84 BogoMIPS (lpj=9623690)
[ 39.102578] Mount-cache hash table entries: 256
[ 39.107335] CPU: L1 I cache: 32K, L1 D cache: 32K
[ 39.112197] CPU: L2 cache: 4096K
[ 39.115543] using mwait in idle threads.
[ 39.119581] CPU: Physical Processor ID: 0
[ 39.123705] CPU: Processor Core ID: 0
[ 39.127489] CPU0: Thermal monitoring enabled (TM2)
[ 39.132403] Freeing SMP alternatives: 40k freed
[ 39.137065] ACPI: Core revision 20060707
[ 39.198053] Using local APIC timer interrupts.
[ 39.255587] result 10208419
[ 39.258499] Detected 10.208 MHz APIC timer.
[ 39.265635] Booting processor 1/2 APIC 0x1
[ 39.280372] Initializing CPU#1
[ 39.357366] Calibrating delay using timer specific routine.. 4808.57 BogoMIPS (lpj=9617148)
[ 39.357371] CPU: L1 I cache: 32K, L1 D cache: 32K
[ 39.357373] CPU: L2 cache: 4096K
[ 39.357375] CPU: Physical Processor ID: 0
[ 39.357376] CPU: Processor Core ID: 1
[ 39.357380] CPU1: Thermal monitoring enabled (TM2)
[ 39.357382] Intel(R) Core(TM)2 CPU 6600 @ 2.40GHz stepping 06
[ 39.361374] Brought up 2 CPUs
[ 39.403894] testing NMI watchdog ... OK.
[ 39.447916] time.c: Using 3.579545 MHz WALL PM GTOD PIT/TSC timer.
[ 39.454208] time.c: Detected 2404.211 MHz processor.
[ 39.498905] migration_cost=19
[ 39.502329] Calling initcall 0xffffffff80748822: cpufreq_tsc+0x0/0x6a()
[ 39.509142] Calling initcall 0xffffffff8074cbb7: init_smp_flush+0x0/0x53()
[ 39.516215] Calling initcall 0xffffffff80752fa1: init_elf32_binfmt+0x0/0xc()
[ 39.523460] Calling initcall 0xffffffff807546fa: helper_init+0x0/0x2e()
[ 39.530281] Calling initcall 0xffffffff807549c2: pm_init+0x0/0x27()
[ 39.536746] Calling initcall 0xffffffff80754de9: ksysfs_init+0x0/0x27()
[ 39.543560] Calling initcall 0xffffffff80756f88: filelock_init+0x0/0x2e()
[ 39.550551] Calling initcall 0xffffffff807579a5: init_misc_binfmt+0x0/0x35()
[ 39.557800] Calling initcall 0xffffffff807579da: init_script_binfmt+0x0/0xc()
[ 39.565124] Calling initcall 0xffffffff807579e6: init_elf_binfmt+0x0/0xc()
[ 39.572190] Calling initcall 0xffffffff80761e95: init_cpufreq_transition_notifier_list+0x0/0x11()
[ 39.581356] Calling initcall 0xffffffff80763a90: sock_init+0x0/0x57()
[ 39.588003] Calling initcall 0xffffffff80764160: netlink_proto_init+0x0/0x164()
[ 39.595611] NET: Registered protocol family 16
[ 39.600173] Calling initcall 0xffffffff8075a0d7: kobject_uevent_init+0x0/0x39()
[ 39.607776] Calling initcall 0xffffffff8075a204: pcibus_class_init+0x0/0xc()
[ 39.615023] Calling initcall 0xffffffff8075a9e7: pci_driver_init+0x0/0xc()
[ 39.622100] Calling initcall 0xffffffff8075c277: dock_init+0x0/0x46()
[ 39.628787] Calling initcall 0xffffffff8075d288: tty_class_init+0x0/0x27()
[ 39.635857] Calling initcall 0xffffffff8075db59: vtconsole_class_init+0x0/0xb5()
[ 39.643588] Calling initcall 0xffffffff8075ab27: acpi_pci_init+0x0/0x2d()
[ 39.650580] ACPI: bus type pci registered
[ 39.654700] Calling initcall 0xffffffff8075bb21: init_acpi_device_notify+0x0/0x48()
[ 39.662653] Calling initcall 0xffffffff80762a75: pci_access_init+0x0/0x3c()
[ 39.669826] PCI: BIOS Bug: MCFG area at f0000000 is not E820-reserved
[ 39.676374] PCI: Not using MMCONFIG.
[ 39.680063] PCI: Using configuration type 1
[ 39.684362] Calling initcall 0xffffffff80751790: topology_init+0x0/0x2f()
[ 39.691381] Calling initcall 0xffffffff807544ea: param_sysfs_init+0x0/0x187()
[ 39.699744] Calling initcall 0xffffffff80245a51: pm_sysrq_init+0x0/0x17()
[ 39.706739] Calling initcall 0xffffffff80757604: init_bio+0x0/0xff()
[ 39.713338] Calling initcall 0xffffffff80759fc9: genhd_device_init+0x0/0x4d()
[ 39.720700] Calling initcall 0xffffffff8075ab54: fbmem_init+0x0/0x92()
[ 39.727435] Calling initcall 0xffffffff8075b93d: acpi_init+0x0/0x1e4()
[ 39.742465] ACPI: Interpreter enabled
[ 39.746617] ACPI: Using IOAPIC for interrupt routing
[ 39.751736] Calling initcall 0xffffffff8075bc4c: acpi_ec_init+0x0/0x60()
[ 39.758634] Calling initcall 0xffffffff8075c536: acpi_pci_root_init+0x0/0x27()
[ 39.766155] Calling initcall 0xffffffff8075c622: acpi_pci_link_init+0x0/0x46()
[ 39.773671] Calling initcall 0xffffffff8075c702: acpi_power_init+0x0/0x76()
[ 39.780832] Calling initcall 0xffffffff8075c899: acpi_system_init+0x0/0xbd()
[ 39.788079] Calling initcall 0xffffffff8075c956: acpi_event_init+0x0/0x3c()
[ 39.795247] Calling initcall 0xffffffff8075c992: acpi_scan_init+0x0/0x1a5()
[ 39.803211] ACPI: PCI Root Bridge [PCI0] (0000:00)
[ 39.809750] PCI: Ignoring BAR0-3 of IDE controller 0000:00:1f.1
[ 39.816340] PCI: Transparent bridge - 0000:00:1e.0
[ 39.828402] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 *10 11 12 14 15)
[ 39.836278] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 *7 10 11 12 14 15)
[ 39.844147] ACPI: PCI Interrupt Link [LNKC] (IRQs *3 4 5 6 7 10 11 12 14 15)
[ 39.852014] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 10 *11 12 14 15)
[ 39.859882] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 *5 6 7 10 11 12 14 15)
[ 39.867752] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 *10 11 12 14 15)
[ 39.875621] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
[ 39.887412] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 *6 7 10 11 12 14 15)
[ 39.895159] Calling initcall 0xffffffff8075cca4: acpi_cm_sbs_init+0x0/0x3()
[ 39.902311] Calling initcall 0xffffffff8075cca7: pnp_init+0x0/0x1e()
[ 39.908858] Linux Plug and Play Support v0.97 (c) Adam Belay
[ 39.914628] Calling initcall 0xffffffff8075ce08: pnpacpi_init+0x0/0x69()
[ 39.921536] pnp: PnP ACPI init
[ 39.927003] pnp: PnP ACPI: found 13 devices
[ 39.931304] Calling initcall 0xffffffff8075d89f: misc_init+0x0/0x7d()
[ 39.937954] Calling initcall 0xffffffff804988d0: cn_init+0x0/0xc8()
[ 39.944441] Calling initcall 0xffffffff80760a72: init_scsi+0x0/0x82()
[ 39.951173] SCSI subsystem initialized
[ 39.955040] Calling initcall 0xffffffff807610f9: usb_init+0x0/0x103()
[ 39.961716] usbcore: registered new interface driver usbfs
[ 39.967338] usbcore: registered new interface driver hub
[ 39.972789] usbcore: registered new device driver usb
[ 39.977949] Calling initcall 0xffffffff80761437: serio_init+0x0/0xbc()
[ 39.984694] Calling initcall 0xffffffff80761982: input_init+0x0/0x11b()
[ 39.991508] Calling initcall 0xffffffff80761d69: rtc_init+0x0/0x3f()
[ 39.998061] Calling initcall 0xffffffff80761da8: rtc_sysfs_init+0x0/0xc()
[ 40.005434] Calling initcall 0xffffffff80761db4: rtc_proc_init+0x0/0xc()
[ 40.012328] Calling initcall 0xffffffff80761dc0: rtc_dev_init+0x0/0xa4()
[ 40.019229] Calling initcall 0xffffffff80761e64: i2c_init+0x0/0x31()
[ 40.025815] Calling initcall 0xffffffff80762509: dma_bus_init+0x0/0x2a()
[ 40.032712] Calling initcall 0xffffffff80762ab1: pci_acpi_init+0x0/0xa4()
[ 40.039695] PCI: Using ACPI for IRQ routing
[ 40.043991] PCI: If a device doesn't work, try "pci=routeirq". If it helps, post a report
[ 40.052454] Calling initcall 0xffffffff80762b55: pci_legacy_init+0x0/0x120()
[ 40.059698] Calling initcall 0xffffffff80762fe4: pcibios_irq_init+0x0/0x49b()
[ 40.067024] Calling initcall 0xffffffff8076347f: pcibios_init+0x0/0x66()
[ 40.073981] Calling initcall 0xffffffff80763b3c: proto_init+0x0/0x33()
[ 40.080705] Calling initcall 0xffffffff80763c81: net_dev_init+0x0/0x22b()
[ 40.087696] Calling initcall 0xffffffff807642c4: genl_init+0x0/0xa6()
[ 40.094335] Calling initcall 0xffffffff8074890a: late_hpet_init+0x0/0xb2()
[ 40.101415] Calling initcall 0xffffffff8074b411: pci_iommu_init+0x0/0xf()
[ 40.108407] PCI-GART: No AMD northbridge found.
[ 40.113050] Calling initcall 0xffffffff80756f1e: init_pipe_fs+0x0/0x40()
[ 40.119951] Calling initcall 0xffffffff8075cb71: acpi_motherboard_init+0x0/0x133()
[ 40.128392] Calling initcall 0xffffffff8075cda9: pnp_system_init+0x0/0xc()
[ 40.135482] pnp: 00:06: ioport range 0x290-0x297 has been reserved
[ 40.141784] Calling initcall 0xffffffff8075d1a2: chr_dev_init+0x0/0x82()
[ 40.148847] Calling initcall 0xffffffff8075f813: firmware_class_init+0x0/0x68()
[ 40.156460] Calling initcall 0xffffffff80761f39: cpufreq_gov_performance_init+0x0/0xc()
[ 40.164758] Calling initcall 0xffffffff80761f51: cpufreq_gov_userspace_init+0x0/0x1c()
[ 40.172965] Calling initcall 0xffffffff80762541: pcibios_assign_resources+0x0/0x81()
[ 40.181014] PCI: Bridge: 0000:00:01.0
[ 40.184791] IO window: c000-cfff
[ 40.188312] MEM window: faa00000-feafffff
[ 40.192609] PREFETCH window: cff00000-efefffff
[ 40.197339] PCI: Bridge: 0000:00:1c.0
[ 40.201116] IO window: disabled.
[ 40.204637] MEM window: disabled.
[ 40.208244] PREFETCH window: cfe00000-cfefffff
[ 40.212976] PCI: Bridge: 0000:00:1c.3
[ 40.216752] IO window: b000-bfff
[ 40.220274] MEM window: fa900000-fa9fffff
[ 40.224572] PREFETCH window: disabled.
[ 40.228610] PCI: Bridge: 0000:00:1c.4
[ 40.232387] IO window: a000-afff
[ 40.235909] MEM window: fa800000-fa8fffff
[ 40.240205] PREFETCH window: disabled.
[ 40.244245] PCI: Bridge: 0000:00:1e.0
[ 40.248022] IO window: disabled.
[ 40.251544] MEM window: fa700000-fa7fffff
[ 40.255842] PREFETCH window: disabled.
[ 40.260277] ACPI: PCI Interrupt 0000:00:01.0[A] -> GSI 16 (level, low) -> IRQ 16
[ 40.267936] ACPI: PCI Interrupt 0000:00:1c.0[A] -> GSI 16 (level, low) -> IRQ 16
[ 40.275598] ACPI: PCI Interrupt 0000:00:1c.3[D] -> GSI 19 (level, low) -> IRQ 19
[ 40.283258] ACPI: PCI Interrupt 0000:00:1c.4[A] -> GSI 16 (level, low) -> IRQ 16
[ 40.290917] Calling initcall 0xffffffff80764bad: inet_init+0x0/0x3cb()
[ 40.297652] NET: Registered protocol family 2
[ 40.325140] IP route cache hash table entries: 65536 (order: 7, 524288 bytes)
[ 40.332523] TCP established hash table entries: 262144 (order: 10, 4194304 bytes)
[ 40.341765] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
[ 40.349185] TCP: Hash tables configured (established 262144 bind 65536)
[ 40.355903] TCP reno registered
[ 40.359204] Calling initcall 0xffffffff8020cd31: time_init_device+0x0/0x22()
[ 40.366529] Calling initcall 0xffffffff80749b41: init_timer_sysfs+0x0/0x22()
[ 40.373802] Calling initcall 0xffffffff80749b21: i8259A_init_sysfs+0x0/0x20()
[ 40.381157] Calling initcall 0xffffffff8074a039: vsyscall_init+0x0/0x98()
[ 40.388150] Calling initcall 0xffffffff8074a605: sbf_init+0x0/0xd0()
[ 40.394698] Calling initcall 0xffffffff8074b1a4: i8237A_init_sysfs+0x0/0x20()
[ 40.402053] Calling initcall 0xffffffff8074b611: mce_init_device+0x0/0x148()
[ 40.409367] Calling initcall 0xffffffff8074b52f: periodic_mcheck_init+0x0/0x24()
[ 40.417061] Calling initcall 0xffffffff8074b7ca: thermal_throttle_init_device+0x0/0x49()
[ 40.425449] Calling initcall 0xffffffff8074bbfa: threshold_init_device+0x0/0x30c()
[ 40.433309] Calling initcall 0xffffffff8074c99f: msr_init+0x0/0x10c()
[ 40.439987] Calling initcall 0xffffffff8074caab: cpuid_init+0x0/0x10c()
[ 40.446838] Calling initcall 0xffffffff8074dcae: init_lapic_sysfs+0x0/0x31()
[ 40.454101] Calling initcall 0xffffffff8074e870: ioapic_init_sysfs+0x0/0xa7()
[ 40.461457] Calling initcall 0xffffffff80751649: audit_classes_init+0x0/0x8a()
[ 40.468974] Calling initcall 0xffffffff80752139: cache_sysfs_init+0x0/0x46()
[ 40.476386] Calling initcall 0xffffffff807523cd: x8664_sysctl_init+0x0/0x16()
[ 40.483727] Calling initcall 0xffffffff80752c81: aes_init+0x0/0x320()
[ 40.490384] Calling initcall 0xffffffff80752fad: ia32_binfmt_init+0x0/0x18()
[ 40.497633] Calling initcall 0xffffffff80752fc5: init_syscall32+0x0/0x59()
[ 40.504707] Calling initcall 0xffffffff8075301e: init_aout_binfmt+0x0/0xc()
[ 40.511864] Calling initcall 0xffffffff80753a91: create_proc_profile+0x0/0x258()
[ 40.519958] Calling initcall 0xffffffff80753e4d: ioresources_init+0x0/0x40()
[ 40.527207] Calling initcall 0xffffffff80753f7b: timekeeping_init_device+0x0/0x20()
[ 40.535179] Calling initcall 0xffffffff807541b8: uid_cache_init+0x0/0x88()
[ 40.542269] Calling initcall 0xffffffff80754671: init_posix_timers+0x0/0x89()
[ 40.549605] Calling initcall 0xffffffff80754728: init_posix_cpu_timers+0x0/0x5e()
[ 40.557386] Calling initcall 0xffffffff807547f6: latency_init+0x0/0x22()
[ 40.564286] Calling initcall 0xffffffff80754825: init_clocksource_sysfs+0x0/0x50()
[ 40.572168] Calling initcall 0xffffffff807548fd: init_jiffies_clocksource+0x0/0xc()
[ 40.580120] Calling initcall 0xffffffff80754909: init+0x0/0x63()
[ 40.586330] Calling initcall 0xffffffff8075496c: proc_dma_init+0x0/0x22()
[ 40.593317] Calling initcall 0xffffffff80241fb3: percpu_modinit+0x0/0x73()
[ 40.600389] Calling initcall 0xffffffff8075499d: kallsyms_init+0x0/0x25()
[ 40.607368] Calling initcall 0xffffffff807549e9: crash_notes_memory_init+0x0/0x3c()
[ 40.615317] Calling initcall 0xffffffff80754b57: ikconfig_init+0x0/0x3b()
[ 40.622304] Calling initcall 0xffffffff80754c01: audit_init+0x0/0x116()
[ 40.629117] audit: initializing netlink socket (disabled)
[ 40.634631] audit(1160327843.480:1): initialized
[ 40.639362] Calling initcall 0xffffffff80754d96: init_kprobes+0x0/0x53()
[ 40.646266] Calling initcall 0xffffffff80755e81: init_per_zone_pages_min+0x0/0x3e()
[ 40.654222] Calling initcall 0xffffffff80756767: pdflush_init+0x0/0x13()
[ 40.661141] Calling initcall 0xffffffff80756795: kswapd_init+0x0/0x1a()
[ 40.667970] Calling initcall 0xffffffff807567af: setup_vmstat+0x0/0x16()
[ 40.674865] Calling initcall 0xffffffff80756823: procswaps_init+0x0/0x23()
[ 40.681937] Calling initcall 0xffffffff80756846: init_tmpfs+0x0/0xc0()
[ 40.688666] Calling initcall 0xffffffff80756906: cpucache_init+0x0/0x2f()
[ 40.695653] Calling initcall 0xffffffff80756f5e: fasync_init+0x0/0x2a()
[ 40.702469] Calling initcall 0xffffffff80757553: aio_setup+0x0/0x64()
[ 40.709131] Calling initcall 0xffffffff8075777b: inotify_setup+0x0/0xd()
[ 40.716027] Calling initcall 0xffffffff80757788: inotify_user_setup+0x0/0xbb()
[ 40.723558] Calling initcall 0xffffffff80757843: eventpoll_init+0x0/0xd0()
[ 40.730639] Calling initcall 0xffffffff80757913: init_sys32_ioctl+0x0/0x92()
[ 40.737893] Calling initcall 0xffffffff807579f2: init_mbcache+0x0/0x1d()
[ 40.744788] Calling initcall 0xffffffff80757a0f: dquot_init+0x0/0xe9()
[ 40.751507] VFS: Disk quotas dquot_6.5.1
[ 40.755558] Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[ 40.762107] Calling initcall 0xffffffff80757af8: dnotify_init+0x0/0x2a()
[ 40.769443] Calling initcall 0xffffffff80757f71: configfs_init+0x0/0x91()
[ 40.776436] Calling initcall 0xffffffff80758002: init_devpts_fs+0x0/0x33()
[ 40.783507] Calling initcall 0xffffffff80758035: init_reiserfs_fs+0x0/0x8e()
[ 40.790755] Calling initcall 0xffffffff807581d9: init_ext3_fs+0x0/0x63()
[ 40.797660] Calling initcall 0xffffffff807582e8: journal_init+0x0/0xbb()
[ 40.804573] Calling initcall 0xffffffff807583a3: init_ext2_fs+0x0/0x63()
[ 40.811480] Calling initcall 0xffffffff80758438: init_cramfs_fs+0x0/0x27()
[ 40.818556] Calling initcall 0xffffffff8075845f: init_ramfs_fs+0x0/0xc()
[ 40.825452] Calling initcall 0xffffffff807584ac: init_fat_fs+0x0/0x48()
[ 40.832265] Calling initcall 0xffffffff807584f4: init_msdos_fs+0x0/0xc()
[ 40.839159] Calling initcall 0xffffffff80758500: init_vfat_fs+0x0/0xc()
[ 40.845966] Calling initcall 0xffffffff8075850c: init_iso9660_fs+0x0/0x65()
[ 40.853130] Calling initcall 0xffffffff80758695: init_nfs_fs+0x0/0xbe()
[ 40.859973] Calling initcall 0xffffffff807588ff: init_nfsd+0x0/0xa3()
[ 40.866607] Installing knfsd (copyright (C) 1996 [email protected]).
[ 40.873189] Calling initcall 0xffffffff807589a2: init_nlm+0x0/0x21()
[ 40.879747] Calling initcall 0xffffffff807589c3: init_nls_ascii+0x0/0xc()
[ 40.886729] Calling initcall 0xffffffff807589cf: init_nls_utf8+0x0/0x1f()
[ 40.893708] Calling initcall 0xffffffff807589ee: init_smb_fs+0x0/0x65()
[ 40.900522] Calling initcall 0xffffffff80758a53: init_cifs+0x0/0x4f8()
[ 40.907301] Calling initcall 0xffffffff80758f4b: init_romfs_fs+0x0/0x53()
[ 40.914286] Calling initcall 0xffffffff80758f9e: init_autofs_fs+0x0/0xc()
[ 40.921270] Calling initcall 0xffffffff80758faa: init_autofs4_fs+0x0/0xc()
[ 40.928342] initcall at 0xffffffff80758faa: init_autofs4_fs+0x0/0xc(): returned with error code -16
[ 40.940275] Calling initcall 0xffffffff80759005: fuse_init+0x0/0x10a()
[ 40.946994] fuse init (API version 7.7)
[ 40.950983] Calling initcall 0xffffffff8075911b: init_udf_fs+0x0/0x53()
[ 40.957801] Calling initcall 0xffffffff8075916e: init_jfs_fs+0x0/0x1c7()
[ 40.964708] JFS: nTxBlock = 8192, nTxLock = 65536
[ 40.972792] Calling initcall 0xffffffff8075948e: init_xfs_fs+0x0/0x115()
[ 40.979691] SGI XFS with ACLs, large block/inode numbers, no debug enabled
[ 40.986819] SGI XFS Quota Management subsystem
[ 40.991383] Calling initcall 0xffffffff807595a3: ipc_init+0x0/0x14()
[ 40.997934] Calling initcall 0xffffffff807597e7: init_mqueue_fs+0x0/0xcd()
[ 41.005030] Calling initcall 0xffffffff80759a0e: key_proc_init+0x0/0x52()
[ 41.012016] Calling initcall 0xffffffff80759a60: crypto_algapi_init+0x0/0xa()
[ 41.019349] Calling initcall 0xffffffff80759a8a: cryptomgr_init+0x0/0xc()
[ 41.026751] Calling initcall 0xffffffff80759a96: hmac_module_init+0x0/0xc()
[ 41.033903] Calling initcall 0xffffffff80759aa2: init+0x0/0x53()
[ 41.040105] Calling initcall 0xffffffff80759af5: init+0x0/0xc()
[ 41.046225] Calling initcall 0xffffffff80759b01: init+0x0/0xc()
[ 41.052339] Calling initcall 0xffffffff80759b0d: init+0x0/0xc()
[ 41.058454] Calling initcall 0xffffffff80759b19: init+0x0/0x35()
[ 41.064664] Calling initcall 0xffffffff80759b4e: aes_init+0x0/0x322()
[ 41.071319] Calling initcall 0xffffffff80759e70: init+0x0/0xc()
[ 41.077436] Calling initcall 0xffffffff8075a016: noop_init+0x0/0xc()
[ 41.083990] io scheduler noop registered
[ 41.088072] Calling initcall 0xffffffff8075a022: as_init+0x0/0xc()
[ 41.094452] io scheduler anticipatory registered (default)
[ 41.100136] Calling initcall 0xffffffff8075a02e: deadline_init+0x0/0xc()
[ 41.107035] io scheduler deadline registered
[ 41.111462] Calling initcall 0xffffffff8075a03a: cfq_init+0x0/0x9d()
[ 41.118017] io scheduler cfq registered
[ 41.122004] Calling initcall 0xffffffff80429db3: pci_init+0x0/0x2b()
[ 41.130429] Calling initcall 0xffffffff8075a9f3: pci_sysfs_init+0x0/0x34()
[ 41.137551] Calling initcall 0xffffffff8075aa27: pci_proc_init+0x0/0x68()
[ 41.144550] Calling initcall 0xffffffff8075aa8f: pcie_portdrv_init+0x0/0x3b()
[ 41.151969] assign_interrupt_mode Found MSI capability
[ 41.157341] assign_interrupt_mode Found MSI capability
[ 41.162744] assign_interrupt_mode Found MSI capability
[ 41.168121] assign_interrupt_mode Found MSI capability
[ 41.173464] Calling initcall 0xffffffff8075aaca: aer_service_init+0x0/0xc()
[ 41.180636] Calling initcall 0xffffffff8075aeb0: fb_console_init+0x0/0x110()
[ 41.187894] Calling initcall 0xffffffff80440aea: nvidiafb_init+0x0/0x22a()
[ 41.194995] ACPI: PCI Interrupt 0000:05:00.0[A] -> GSI 16 (level, low) -> IRQ 16
[ 41.202657] nvidiafb: Device ID: 10de0391
[ 41.221616] nvidiafb: CRTC0 analog found
[ 41.241421] nvidiafb: CRTC1 analog not found
[ 41.261958] nvidiafb: EDID found from BUS1
[ 41.380769] nvidiafb: EDID found from BUS2
[ 41.384985] nvidiafb: CRTC 0 appears to have a CRT attached
[ 41.390665] nvidiafb: Using CRT on CRTC 0

nvGetClocks: arch=64 p4020=0xa4301000 p4024=0x00005303 M=3 N=83 MB=0 NB=0 P=0
</log>

<config>
#
# Automatically generated make config: don't edit
# Linux kernel version: 2.6.19-rc1
# Sun Oct 8 09:20:42 2006
#
CONFIG_X86_64=y
CONFIG_64BIT=y
CONFIG_X86=y
CONFIG_ZONE_DMA32=y
CONFIG_LOCKDEP_SUPPORT=y
CONFIG_STACKTRACE_SUPPORT=y
CONFIG_SEMAPHORE_SLEEPERS=y
CONFIG_MMU=y
CONFIG_RWSEM_GENERIC_SPINLOCK=y
CONFIG_GENERIC_HWEIGHT=y
CONFIG_GENERIC_CALIBRATE_DELAY=y
CONFIG_X86_CMPXCHG=y
CONFIG_EARLY_PRINTK=y
CONFIG_GENERIC_ISA_DMA=y
CONFIG_GENERIC_IOMAP=y
CONFIG_ARCH_MAY_HAVE_PC_FDC=y
CONFIG_ARCH_POPULATES_NODE_MAP=y
CONFIG_DMI=y
CONFIG_AUDIT_ARCH=y
CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"

#
# Code maturity level options
#
CONFIG_EXPERIMENTAL=y
CONFIG_LOCK_KERNEL=y
CONFIG_INIT_ENV_ARG_LIMIT=32

#
# General setup
#
CONFIG_LOCALVERSION="-w8"
# CONFIG_LOCALVERSION_AUTO is not set
CONFIG_SWAP=y
CONFIG_SYSVIPC=y
# CONFIG_IPC_NS is not set
CONFIG_POSIX_MQUEUE=y
CONFIG_BSD_PROCESS_ACCT=y
# CONFIG_BSD_PROCESS_ACCT_V3 is not set
# CONFIG_TASKSTATS is not set
# CONFIG_UTS_NS is not set
CONFIG_AUDIT=y
CONFIG_AUDITSYSCALL=y
CONFIG_IKCONFIG=y
CONFIG_IKCONFIG_PROC=y
CONFIG_CPUSETS=y
CONFIG_RELAY=y
CONFIG_INITRAMFS_SOURCE=""
CONFIG_CC_OPTIMIZE_FOR_SIZE=y
CONFIG_SYSCTL=y
# CONFIG_EMBEDDED is not set
CONFIG_UID16=y
# CONFIG_SYSCTL_SYSCALL is not set
CONFIG_KALLSYMS=y
# CONFIG_KALLSYMS_ALL is not set
# CONFIG_KALLSYMS_EXTRA_PASS is not set
CONFIG_HOTPLUG=y
CONFIG_PRINTK=y
CONFIG_BUG=y
CONFIG_ELF_CORE=y
CONFIG_BASE_FULL=y
CONFIG_FUTEX=y
CONFIG_EPOLL=y
CONFIG_SHMEM=y
CONFIG_SLAB=y
CONFIG_VM_EVENT_COUNTERS=y
CONFIG_RT_MUTEXES=y
# CONFIG_TINY_SHMEM is not set
CONFIG_BASE_SMALL=0
# CONFIG_SLOB is not set

#
# Loadable module support
#
CONFIG_MODULES=y
CONFIG_MODULE_UNLOAD=y
CONFIG_MODULE_FORCE_UNLOAD=y
# CONFIG_MODVERSIONS is not set
# CONFIG_MODULE_SRCVERSION_ALL is not set
CONFIG_KMOD=y
CONFIG_STOP_MACHINE=y

#
# Block layer
#
CONFIG_BLOCK=y
CONFIG_LBD=y
# CONFIG_BLK_DEV_IO_TRACE is not set
# CONFIG_LSF is not set

#
# IO Schedulers
#
CONFIG_IOSCHED_NOOP=y
CONFIG_IOSCHED_AS=y
CONFIG_IOSCHED_DEADLINE=y
CONFIG_IOSCHED_CFQ=y
CONFIG_DEFAULT_AS=y
# CONFIG_DEFAULT_DEADLINE is not set
# CONFIG_DEFAULT_CFQ is not set
# CONFIG_DEFAULT_NOOP is not set
CONFIG_DEFAULT_IOSCHED="anticipatory"

#
# Processor type and features
#
CONFIG_X86_PC=y
# CONFIG_X86_VSMP is not set
# CONFIG_MK8 is not set
CONFIG_MPSC=y
# CONFIG_GENERIC_CPU is not set
CONFIG_X86_L1_CACHE_BYTES=128
CONFIG_X86_L1_CACHE_SHIFT=7
CONFIG_X86_INTERNODE_CACHE_BYTES=128
CONFIG_X86_TSC=y
CONFIG_X86_GOOD_APIC=y
# CONFIG_MICROCODE is not set
CONFIG_X86_MSR=y
CONFIG_X86_CPUID=y
CONFIG_X86_HT=y
CONFIG_X86_IO_APIC=y
CONFIG_X86_LOCAL_APIC=y
# CONFIG_MTRR is not set
CONFIG_SMP=y
# CONFIG_SCHED_SMT is not set
CONFIG_SCHED_MC=y
# CONFIG_PREEMPT_NONE is not set
CONFIG_PREEMPT_VOLUNTARY=y
# CONFIG_PREEMPT is not set
CONFIG_PREEMPT_BKL=y
# CONFIG_NUMA is not set
CONFIG_ARCH_SPARSEMEM_ENABLE=y
CONFIG_ARCH_FLATMEM_ENABLE=y
CONFIG_SELECT_MEMORY_MODEL=y
CONFIG_FLATMEM_MANUAL=y
# CONFIG_DISCONTIGMEM_MANUAL is not set
# CONFIG_SPARSEMEM_MANUAL is not set
CONFIG_FLATMEM=y
CONFIG_FLAT_NODE_MEM_MAP=y
# CONFIG_SPARSEMEM_STATIC is not set
CONFIG_SPLIT_PTLOCK_CPUS=4
CONFIG_RESOURCES_64BIT=y
CONFIG_NR_CPUS=4
# CONFIG_HOTPLUG_CPU is not set
CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y
CONFIG_HPET_TIMER=y
# CONFIG_HPET_EMULATE_RTC is not set
CONFIG_IOMMU=y
# CONFIG_CALGARY_IOMMU is not set
CONFIG_SWIOTLB=y
CONFIG_X86_MCE=y
CONFIG_X86_MCE_INTEL=y
CONFIG_X86_MCE_AMD=y
CONFIG_KEXEC=y
# CONFIG_CRASH_DUMP is not set
CONFIG_PHYSICAL_START=0x200000
CONFIG_SECCOMP=y
# CONFIG_CC_STACKPROTECTOR is not set
# CONFIG_HZ_100 is not set
CONFIG_HZ_250=y
# CONFIG_HZ_1000 is not set
CONFIG_HZ=250
# CONFIG_REORDER is not set
CONFIG_K8_NB=y
CONFIG_GENERIC_HARDIRQS=y
CONFIG_GENERIC_IRQ_PROBE=y
CONFIG_ISA_DMA_API=y
CONFIG_GENERIC_PENDING_IRQ=y

#
# Power management options
#
CONFIG_PM=y
CONFIG_PM_LEGACY=y
# CONFIG_PM_DEBUG is not set
# CONFIG_PM_SYSFS_DEPRECATED is not set

#
# ACPI (Advanced Configuration and Power Interface) Support
#
CONFIG_ACPI=y
CONFIG_ACPI_AC=y
CONFIG_ACPI_BATTERY=y
CONFIG_ACPI_BUTTON=y
CONFIG_ACPI_VIDEO=y
CONFIG_ACPI_HOTKEY=y
CONFIG_ACPI_FAN=y
CONFIG_ACPI_DOCK=y
CONFIG_ACPI_PROCESSOR=y
CONFIG_ACPI_THERMAL=y
# CONFIG_ACPI_ASUS is not set
# CONFIG_ACPI_IBM is not set
# CONFIG_ACPI_TOSHIBA is not set
# CONFIG_ACPI_CUSTOM_DSDT is not set
CONFIG_ACPI_BLACKLIST_YEAR=0
# CONFIG_ACPI_DEBUG is not set
CONFIG_ACPI_EC=y
CONFIG_ACPI_POWER=y
CONFIG_ACPI_SYSTEM=y
CONFIG_X86_PM_TIMER=y
CONFIG_ACPI_CONTAINER=y
# CONFIG_ACPI_SBS is not set

#
# CPU Frequency scaling
#
CONFIG_CPU_FREQ=y
CONFIG_CPU_FREQ_TABLE=y
CONFIG_CPU_FREQ_DEBUG=y
CONFIG_CPU_FREQ_STAT=y
CONFIG_CPU_FREQ_STAT_DETAILS=y
CONFIG_CPU_FREQ_DEFAULT_GOV_PERFORMANCE=y
# CONFIG_CPU_FREQ_DEFAULT_GOV_USERSPACE is not set
CONFIG_CPU_FREQ_GOV_PERFORMANCE=y
CONFIG_CPU_FREQ_GOV_POWERSAVE=y
CONFIG_CPU_FREQ_GOV_USERSPACE=y
CONFIG_CPU_FREQ_GOV_ONDEMAND=y
CONFIG_CPU_FREQ_GOV_CONSERVATIVE=y

#
# CPUFreq processor drivers
#
# CONFIG_X86_POWERNOW_K8 is not set
CONFIG_X86_SPEEDSTEP_CENTRINO=y
CONFIG_X86_SPEEDSTEP_CENTRINO_ACPI=y
CONFIG_X86_ACPI_CPUFREQ=y

#
# shared options
#
# CONFIG_X86_ACPI_CPUFREQ_PROC_INTF is not set
# CONFIG_X86_SPEEDSTEP_LIB is not set

#
# Bus options (PCI etc.)
#
CONFIG_PCI=y
CONFIG_PCI_DIRECT=y
CONFIG_PCI_MMCONFIG=y
CONFIG_PCIEPORTBUS=y
CONFIG_PCIEAER=y
CONFIG_PCI_MSI=y
# CONFIG_PCI_MULTITHREAD_PROBE is not set
# CONFIG_PCI_DEBUG is not set
CONFIG_HT_IRQ=y

#
# PCCARD (PCMCIA/CardBus) support
#
# CONFIG_PCCARD is not set

#
# PCI Hotplug Support
#
# CONFIG_HOTPLUG_PCI is not set

#
# Executable file formats / Emulations
#
CONFIG_BINFMT_ELF=y
CONFIG_BINFMT_MISC=y
CONFIG_IA32_EMULATION=y
CONFIG_IA32_AOUT=y
CONFIG_COMPAT=y
CONFIG_SYSVIPC_COMPAT=y

#
# Networking
#
CONFIG_NET=y

#
# Networking options
#
# CONFIG_NETDEBUG is not set
CONFIG_PACKET=y
CONFIG_PACKET_MMAP=y
CONFIG_UNIX=y
CONFIG_XFRM=y
# CONFIG_XFRM_USER is not set
CONFIG_XFRM_SUB_POLICY=y
CONFIG_NET_KEY=y
CONFIG_INET=y
CONFIG_IP_MULTICAST=y
# CONFIG_IP_ADVANCED_ROUTER is not set
CONFIG_IP_FIB_HASH=y
# CONFIG_IP_PNP is not set
# CONFIG_NET_IPIP is not set
# CONFIG_NET_IPGRE is not set
CONFIG_IP_MROUTE=y
CONFIG_IP_PIMSM_V1=y
CONFIG_IP_PIMSM_V2=y
# CONFIG_ARPD is not set
CONFIG_SYN_COOKIES=y
# CONFIG_INET_AH is not set
# CONFIG_INET_ESP is not set
# CONFIG_INET_IPCOMP is not set
# CONFIG_INET_XFRM_TUNNEL is not set
# CONFIG_INET_TUNNEL is not set
CONFIG_INET_XFRM_MODE_TRANSPORT=y
CONFIG_INET_XFRM_MODE_TUNNEL=y
CONFIG_INET_XFRM_MODE_BEET=y
CONFIG_INET_DIAG=y
CONFIG_INET_TCP_DIAG=y
# CONFIG_TCP_CONG_ADVANCED is not set
CONFIG_TCP_CONG_CUBIC=y
CONFIG_DEFAULT_TCP_CONG="cubic"
# CONFIG_IPV6 is not set
# CONFIG_INET6_XFRM_TUNNEL is not set
# CONFIG_INET6_TUNNEL is not set
CONFIG_NETWORK_SECMARK=y
# CONFIG_NETFILTER is not set

#
# DCCP Configuration (EXPERIMENTAL)
#
# CONFIG_IP_DCCP is not set

#
# SCTP Configuration (EXPERIMENTAL)
#
CONFIG_IP_SCTP=y
# CONFIG_SCTP_DBG_MSG is not set
# CONFIG_SCTP_DBG_OBJCNT is not set
# CONFIG_SCTP_HMAC_NONE is not set
# CONFIG_SCTP_HMAC_SHA1 is not set
CONFIG_SCTP_HMAC_MD5=y

#
# TIPC Configuration (EXPERIMENTAL)
#
# CONFIG_TIPC is not set
# CONFIG_ATM is not set
# CONFIG_BRIDGE is not set
# CONFIG_VLAN_8021Q is not set
# CONFIG_DECNET is not set
# CONFIG_LLC2 is not set
# CONFIG_IPX is not set
# CONFIG_ATALK is not set
# CONFIG_X25 is not set
# CONFIG_LAPB is not set
# CONFIG_ECONET is not set
# CONFIG_WAN_ROUTER is not set

#
# QoS and/or fair queueing
#
# CONFIG_NET_SCHED is not set

#
# Network testing
#
# CONFIG_NET_PKTGEN is not set
# CONFIG_NET_TCPPROBE is not set
# CONFIG_HAMRADIO is not set
# CONFIG_IRDA is not set
# CONFIG_BT is not set
# CONFIG_IEEE80211 is not set

#
# Device Drivers
#

#
# Generic Driver Options
#
# CONFIG_STANDALONE is not set
# CONFIG_PREVENT_FIRMWARE_BUILD is not set
CONFIG_FW_LOADER=y
# CONFIG_DEBUG_DRIVER is not set
# CONFIG_SYS_HYPERVISOR is not set

#
# Connector - unified userspace <-> kernelspace linker
#
CONFIG_CONNECTOR=y
CONFIG_PROC_EVENTS=y

#
# Memory Technology Devices (MTD)
#
# CONFIG_MTD is not set

#
# Parallel port support
#
CONFIG_PARPORT=y
CONFIG_PARPORT_PC=y
# CONFIG_PARPORT_SERIAL is not set
CONFIG_PARPORT_PC_FIFO=y
# CONFIG_PARPORT_PC_SUPERIO is not set
# CONFIG_PARPORT_GSC is not set
# CONFIG_PARPORT_AX88796 is not set
CONFIG_PARPORT_1284=y

#
# Plug and Play support
#
CONFIG_PNP=y
# CONFIG_PNP_DEBUG is not set

#
# Protocols
#
CONFIG_PNPACPI=y

#
# Block devices
#
# CONFIG_BLK_DEV_FD is not set
# CONFIG_PARIDE is not set
# CONFIG_BLK_CPQ_DA is not set
# CONFIG_BLK_CPQ_CISS_DA is not set
# CONFIG_BLK_DEV_DAC960 is not set
# CONFIG_BLK_DEV_UMEM is not set
# CONFIG_BLK_DEV_COW_COMMON is not set
CONFIG_BLK_DEV_LOOP=y
CONFIG_BLK_DEV_CRYPTOLOOP=y
# CONFIG_BLK_DEV_NBD is not set
# CONFIG_BLK_DEV_SX8 is not set
# CONFIG_BLK_DEV_UB is not set
CONFIG_BLK_DEV_RAM=y
CONFIG_BLK_DEV_RAM_COUNT=16
CONFIG_BLK_DEV_RAM_SIZE=8192
CONFIG_BLK_DEV_RAM_BLOCKSIZE=1024
CONFIG_BLK_DEV_INITRD=y
CONFIG_CDROM_PKTCDVD=y
CONFIG_CDROM_PKTCDVD_BUFFERS=8
# CONFIG_CDROM_PKTCDVD_WCACHE is not set
# CONFIG_ATA_OVER_ETH is not set

#
# ATA/ATAPI/MFM/RLL support
#
CONFIG_IDE=y
CONFIG_BLK_DEV_IDE=y

#
# Please see Documentation/ide.txt for help/info on IDE drives
#
# CONFIG_BLK_DEV_IDE_SATA is not set
# CONFIG_BLK_DEV_HD_IDE is not set
CONFIG_BLK_DEV_IDEDISK=y
# CONFIG_IDEDISK_MULTI_MODE is not set
CONFIG_BLK_DEV_IDECD=y
# CONFIG_BLK_DEV_IDETAPE is not set
# CONFIG_BLK_DEV_IDEFLOPPY is not set
CONFIG_BLK_DEV_IDESCSI=y
CONFIG_IDE_TASK_IOCTL=y

#
# IDE chipset support/bugfixes
#
# CONFIG_IDE_GENERIC is not set
# CONFIG_BLK_DEV_CMD640 is not set
CONFIG_BLK_DEV_IDEPNP=y
CONFIG_BLK_DEV_IDEPCI=y
CONFIG_IDEPCI_SHARE_IRQ=y
# CONFIG_BLK_DEV_OFFBOARD is not set
CONFIG_BLK_DEV_GENERIC=y
# CONFIG_BLK_DEV_OPTI621 is not set
# CONFIG_BLK_DEV_RZ1000 is not set
CONFIG_BLK_DEV_IDEDMA_PCI=y
# CONFIG_BLK_DEV_IDEDMA_FORCED is not set
CONFIG_IDEDMA_PCI_AUTO=y
# CONFIG_IDEDMA_ONLYDISK is not set
# CONFIG_BLK_DEV_AEC62XX is not set
# CONFIG_BLK_DEV_ALI15X3 is not set
# CONFIG_BLK_DEV_AMD74XX is not set
# CONFIG_BLK_DEV_ATIIXP is not set
# CONFIG_BLK_DEV_CMD64X is not set
# CONFIG_BLK_DEV_TRIFLEX is not set
# CONFIG_BLK_DEV_CY82C693 is not set
# CONFIG_BLK_DEV_CS5520 is not set
# CONFIG_BLK_DEV_CS5530 is not set
# CONFIG_BLK_DEV_HPT34X is not set
# CONFIG_BLK_DEV_HPT366 is not set
# CONFIG_BLK_DEV_JMICRON is not set
# CONFIG_BLK_DEV_SC1200 is not set
CONFIG_BLK_DEV_PIIX=y
# CONFIG_BLK_DEV_IT821X is not set
# CONFIG_BLK_DEV_NS87415 is not set
# CONFIG_BLK_DEV_PDC202XX_OLD is not set
# CONFIG_BLK_DEV_PDC202XX_NEW is not set
# CONFIG_BLK_DEV_SVWKS is not set
CONFIG_BLK_DEV_SIIMAGE=y
# CONFIG_BLK_DEV_SIS5513 is not set
# CONFIG_BLK_DEV_SLC90E66 is not set
# CONFIG_BLK_DEV_TRM290 is not set
# CONFIG_BLK_DEV_VIA82CXXX is not set
# CONFIG_IDE_ARM is not set
CONFIG_BLK_DEV_IDEDMA=y
# CONFIG_IDEDMA_IVB is not set
CONFIG_IDEDMA_AUTO=y
# CONFIG_BLK_DEV_HD is not set

#
# SCSI device support
#
CONFIG_RAID_ATTRS=y
CONFIG_SCSI=y
# CONFIG_SCSI_NETLINK is not set
CONFIG_SCSI_PROC_FS=y

#
# SCSI support type (disk, tape, CD-ROM)
#
CONFIG_BLK_DEV_SD=y
# CONFIG_CHR_DEV_ST is not set
# CONFIG_CHR_DEV_OSST is not set
# CONFIG_BLK_DEV_SR is not set
CONFIG_CHR_DEV_SG=y
# CONFIG_CHR_DEV_SCH is not set

#
# Some SCSI devices (e.g. CD jukebox) support multiple LUNs
#
CONFIG_SCSI_MULTI_LUN=y
CONFIG_SCSI_CONSTANTS=y
CONFIG_SCSI_LOGGING=y

#
# SCSI Transports
#
# CONFIG_SCSI_SPI_ATTRS is not set
# CONFIG_SCSI_FC_ATTRS is not set
# CONFIG_SCSI_ISCSI_ATTRS is not set
# CONFIG_SCSI_SAS_ATTRS is not set
# CONFIG_SCSI_SAS_LIBSAS is not set

#
# SCSI low-level drivers
#
# CONFIG_ISCSI_TCP is not set
# CONFIG_BLK_DEV_3W_XXXX_RAID is not set
# CONFIG_SCSI_3W_9XXX is not set
# CONFIG_SCSI_ACARD is not set
# CONFIG_SCSI_AACRAID is not set
# CONFIG_SCSI_AIC7XXX is not set
# CONFIG_SCSI_AIC7XXX_OLD is not set
# CONFIG_SCSI_AIC79XX is not set
# CONFIG_SCSI_AIC94XX is not set
# CONFIG_SCSI_ARCMSR is not set
# CONFIG_MEGARAID_NEWGEN is not set
# CONFIG_MEGARAID_LEGACY is not set
# CONFIG_MEGARAID_SAS is not set
# CONFIG_SCSI_HPTIOP is not set
# CONFIG_SCSI_BUSLOGIC is not set
# CONFIG_SCSI_DMX3191D is not set
CONFIG_SCSI_EATA=y
CONFIG_SCSI_EATA_TAGGED_QUEUE=y
CONFIG_SCSI_EATA_LINKED_COMMANDS=y
CONFIG_SCSI_EATA_MAX_TAGS=16
# CONFIG_SCSI_FUTURE_DOMAIN is not set
# CONFIG_SCSI_GDTH is not set
# CONFIG_SCSI_IPS is not set
# CONFIG_SCSI_INITIO is not set
# CONFIG_SCSI_INIA100 is not set
# CONFIG_SCSI_PPA is not set
# CONFIG_SCSI_IMM is not set
# CONFIG_SCSI_STEX is not set
# CONFIG_SCSI_SYM53C8XX_2 is not set
# CONFIG_SCSI_IPR is not set
# CONFIG_SCSI_QLOGIC_1280 is not set
# CONFIG_SCSI_QLA_FC is not set
# CONFIG_SCSI_QLA_ISCSI is not set
# CONFIG_SCSI_LPFC is not set
# CONFIG_SCSI_DC395x is not set
# CONFIG_SCSI_DC390T is not set
# CONFIG_SCSI_DEBUG is not set

#
# Serial ATA (prod) and Parallel ATA (experimental) drivers
#
CONFIG_ATA=y
CONFIG_SATA_AHCI=y
# CONFIG_SATA_SVW is not set
CONFIG_ATA_PIIX=y
# CONFIG_SATA_MV is not set
# CONFIG_SATA_NV is not set
# CONFIG_PDC_ADMA is not set
# CONFIG_SATA_QSTOR is not set
CONFIG_SATA_PROMISE=y
# CONFIG_SATA_SX4 is not set
# CONFIG_SATA_SIL is not set
# CONFIG_SATA_SIL24 is not set
# CONFIG_SATA_SIS is not set
# CONFIG_SATA_ULI is not set
# CONFIG_SATA_VIA is not set
# CONFIG_SATA_VITESSE is not set
CONFIG_SATA_INTEL_COMBINED=y
# CONFIG_PATA_ALI is not set
# CONFIG_PATA_AMD is not set
# CONFIG_PATA_ARTOP is not set
# CONFIG_PATA_ATIIXP is not set
# CONFIG_PATA_CMD64X is not set
# CONFIG_PATA_CS5520 is not set
# CONFIG_PATA_CS5530 is not set
# CONFIG_PATA_CYPRESS is not set
# CONFIG_PATA_EFAR is not set
CONFIG_ATA_GENERIC=y
# CONFIG_PATA_HPT366 is not set
# CONFIG_PATA_HPT37X is not set
# CONFIG_PATA_HPT3X2N is not set
# CONFIG_PATA_HPT3X3 is not set
# CONFIG_PATA_IT821X is not set
CONFIG_PATA_JMICRON=y
# CONFIG_PATA_TRIFLEX is not set
CONFIG_PATA_MPIIX=y
# CONFIG_PATA_OLDPIIX is not set
# CONFIG_PATA_NETCELL is not set
# CONFIG_PATA_NS87410 is not set
# CONFIG_PATA_OPTI is not set
# CONFIG_PATA_OPTIDMA is not set
# CONFIG_PATA_PDC_OLD is not set
# CONFIG_PATA_RADISYS is not set
# CONFIG_PATA_RZ1000 is not set
# CONFIG_PATA_SC1200 is not set
# CONFIG_PATA_SERVERWORKS is not set
# CONFIG_PATA_PDC2027X is not set
# CONFIG_PATA_SIL680 is not set
# CONFIG_PATA_SIS is not set
# CONFIG_PATA_VIA is not set
# CONFIG_PATA_WINBOND is not set

#
# Multi-device support (RAID and LVM)
#
# CONFIG_MD is not set

#
# Fusion MPT device support
#
# CONFIG_FUSION is not set
# CONFIG_FUSION_SPI is not set
# CONFIG_FUSION_FC is not set
# CONFIG_FUSION_SAS is not set

#
# IEEE 1394 (FireWire) support
#
# CONFIG_IEEE1394 is not set

#
# I2O device support
#
# CONFIG_I2O is not set

#
# Network device support
#
CONFIG_NETDEVICES=y
CONFIG_DUMMY=y
# CONFIG_BONDING is not set
# CONFIG_EQUALIZER is not set
# CONFIG_TUN is not set
# CONFIG_NET_SB1000 is not set

#
# ARCnet devices
#
# CONFIG_ARCNET is not set

#
# PHY device support
#

#
# Ethernet (10 or 100Mbit)
#
# CONFIG_NET_ETHERNET is not set

#
# Ethernet (1000 Mbit)
#
# CONFIG_ACENIC is not set
# CONFIG_DL2K is not set
# CONFIG_E1000 is not set
# CONFIG_NS83820 is not set
# CONFIG_HAMACHI is not set
# CONFIG_YELLOWFIN is not set
# CONFIG_R8169 is not set
# CONFIG_SIS190 is not set
# CONFIG_SKGE is not set
CONFIG_SKY2=y
# CONFIG_SK98LIN is not set
# CONFIG_TIGON3 is not set
# CONFIG_BNX2 is not set
# CONFIG_QLA3XXX is not set

#
# Ethernet (10000 Mbit)
#
# CONFIG_CHELSIO_T1 is not set
# CONFIG_IXGB is not set
# CONFIG_S2IO is not set
# CONFIG_MYRI10GE is not set

#
# Token Ring devices
#
# CONFIG_TR is not set

#
# Wireless LAN (non-hamradio)
#
# CONFIG_NET_RADIO is not set

#
# Wan interfaces
#
# CONFIG_WAN is not set
# CONFIG_FDDI is not set
# CONFIG_HIPPI is not set
# CONFIG_PLIP is not set
# CONFIG_PPP is not set
# CONFIG_SLIP is not set
# CONFIG_NET_FC is not set
# CONFIG_SHAPER is not set
CONFIG_NETCONSOLE=y
CONFIG_NETPOLL=y
# CONFIG_NETPOLL_RX is not set
# CONFIG_NETPOLL_TRAP is not set
CONFIG_NET_POLL_CONTROLLER=y

#
# ISDN subsystem
#
# CONFIG_ISDN is not set

#
# Telephony Support
#
# CONFIG_PHONE is not set

#
# Input device support
#
CONFIG_INPUT=y
# CONFIG_INPUT_FF_MEMLESS is not set

#
# Userland interfaces
#
CONFIG_INPUT_MOUSEDEV=y
CONFIG_INPUT_MOUSEDEV_PSAUX=y
CONFIG_INPUT_MOUSEDEV_SCREEN_X=1280
CONFIG_INPUT_MOUSEDEV_SCREEN_Y=1024
# CONFIG_INPUT_JOYDEV is not set
# CONFIG_INPUT_TSDEV is not set
CONFIG_INPUT_EVDEV=y
# CONFIG_INPUT_EVBUG is not set

#
# Input Device Drivers
#
CONFIG_INPUT_KEYBOARD=y
CONFIG_KEYBOARD_ATKBD=y
# CONFIG_KEYBOARD_SUNKBD is not set
# CONFIG_KEYBOARD_LKKBD is not set
CONFIG_KEYBOARD_XTKBD=y
# CONFIG_KEYBOARD_NEWTON is not set
# CONFIG_KEYBOARD_STOWAWAY is not set
CONFIG_INPUT_MOUSE=y
CONFIG_MOUSE_PS2=y
# CONFIG_MOUSE_SERIAL is not set
# CONFIG_MOUSE_VSXXXAA is not set
# CONFIG_INPUT_JOYSTICK is not set
# CONFIG_INPUT_TOUCHSCREEN is not set
# CONFIG_INPUT_MISC is not set

#
# Hardware I/O ports
#
CONFIG_SERIO=y
CONFIG_SERIO_I8042=y
CONFIG_SERIO_SERPORT=y
CONFIG_SERIO_CT82C710=y
# CONFIG_SERIO_PARKBD is not set
CONFIG_SERIO_PCIPS2=y
CONFIG_SERIO_LIBPS2=y
CONFIG_SERIO_RAW=y
# CONFIG_GAMEPORT is not set

#
# Character devices
#
CONFIG_VT=y
CONFIG_VT_CONSOLE=y
CONFIG_HW_CONSOLE=y
# CONFIG_VT_HW_CONSOLE_BINDING is not set
# CONFIG_SERIAL_NONSTANDARD is not set

#
# Serial drivers
#
CONFIG_SERIAL_8250=y
CONFIG_SERIAL_8250_CONSOLE=y
CONFIG_SERIAL_8250_PCI=y
CONFIG_SERIAL_8250_PNP=y
CONFIG_SERIAL_8250_NR_UARTS=4
CONFIG_SERIAL_8250_RUNTIME_UARTS=4
CONFIG_SERIAL_8250_EXTENDED=y
CONFIG_SERIAL_8250_MANY_PORTS=y
CONFIG_SERIAL_8250_SHARE_IRQ=y
# CONFIG_SERIAL_8250_DETECT_IRQ is not set
CONFIG_SERIAL_8250_RSA=y

#
# Non-8250 serial port support
#
CONFIG_SERIAL_CORE=y
CONFIG_SERIAL_CORE_CONSOLE=y
# CONFIG_SERIAL_JSM is not set
CONFIG_UNIX98_PTYS=y
CONFIG_LEGACY_PTYS=y
CONFIG_LEGACY_PTY_COUNT=256
CONFIG_PRINTER=y
# CONFIG_LP_CONSOLE is not set
CONFIG_PPDEV=y
# CONFIG_TIPAR is not set

#
# IPMI
#
# CONFIG_IPMI_HANDLER is not set

#
# Watchdog Cards
#
# CONFIG_WATCHDOG is not set
# CONFIG_HW_RANDOM is not set
CONFIG_NVRAM=y
CONFIG_RTC=y
# CONFIG_DTLK is not set
# CONFIG_R3964 is not set
# CONFIG_APPLICOM is not set

#
# Ftape, the floppy tape device driver
#
CONFIG_AGP=y
CONFIG_AGP_AMD64=y
CONFIG_AGP_INTEL=y
# CONFIG_AGP_SIS is not set
# CONFIG_AGP_VIA is not set
CONFIG_DRM=y
# CONFIG_DRM_TDFX is not set
# CONFIG_DRM_R128 is not set
# CONFIG_DRM_RADEON is not set
# CONFIG_DRM_I810 is not set
# CONFIG_DRM_I830 is not set
# CONFIG_DRM_I915 is not set
# CONFIG_DRM_MGA is not set
# CONFIG_DRM_SIS is not set
# CONFIG_DRM_VIA is not set
# CONFIG_DRM_SAVAGE is not set
# CONFIG_MWAVE is not set
# CONFIG_PC8736x_GPIO is not set
# CONFIG_RAW_DRIVER is not set
CONFIG_HPET=y
# CONFIG_HPET_RTC_IRQ is not set
CONFIG_HPET_MMAP=y
CONFIG_HANGCHECK_TIMER=y

#
# TPM devices
#
# CONFIG_TCG_TPM is not set
# CONFIG_TELCLOCK is not set

#
# I2C support
#
CONFIG_I2C=y
# CONFIG_I2C_CHARDEV is not set

#
# I2C Algorithms
#
CONFIG_I2C_ALGOBIT=y
# CONFIG_I2C_ALGOPCF is not set
# CONFIG_I2C_ALGOPCA is not set

#
# I2C Hardware Bus support
#
# CONFIG_I2C_ALI1535 is not set
# CONFIG_I2C_ALI1563 is not set
# CONFIG_I2C_ALI15X3 is not set
# CONFIG_I2C_AMD756 is not set
# CONFIG_I2C_AMD8111 is not set
# CONFIG_I2C_I801 is not set
# CONFIG_I2C_I810 is not set
# CONFIG_I2C_PIIX4 is not set
# CONFIG_I2C_NFORCE2 is not set
# CONFIG_I2C_OCORES is not set
# CONFIG_I2C_PARPORT is not set
# CONFIG_I2C_PARPORT_LIGHT is not set
# CONFIG_I2C_PROSAVAGE is not set
# CONFIG_I2C_SAVAGE4 is not set
# CONFIG_I2C_SIS5595 is not set
# CONFIG_I2C_SIS630 is not set
# CONFIG_I2C_SIS96X is not set
# CONFIG_I2C_STUB is not set
# CONFIG_I2C_VIA is not set
# CONFIG_I2C_VIAPRO is not set
# CONFIG_I2C_VOODOO3 is not set
# CONFIG_I2C_PCA_ISA is not set

#
# Miscellaneous I2C Chip support
#
# CONFIG_SENSORS_DS1337 is not set
# CONFIG_SENSORS_DS1374 is not set
# CONFIG_SENSORS_EEPROM is not set
# CONFIG_SENSORS_PCF8574 is not set
# CONFIG_SENSORS_PCA9539 is not set
# CONFIG_SENSORS_PCF8591 is not set
# CONFIG_SENSORS_MAX6875 is not set
# CONFIG_I2C_DEBUG_CORE is not set
# CONFIG_I2C_DEBUG_ALGO is not set
# CONFIG_I2C_DEBUG_BUS is not set
# CONFIG_I2C_DEBUG_CHIP is not set

#
# SPI support
#
# CONFIG_SPI is not set
# CONFIG_SPI_MASTER is not set

#
# Dallas's 1-wire bus
#
# CONFIG_W1 is not set

#
# Hardware Monitoring support
#
# CONFIG_HWMON is not set
# CONFIG_HWMON_VID is not set

#
# Misc devices
#
# CONFIG_IBM_ASM is not set
# CONFIG_TIFM_CORE is not set

#
# Multimedia devices
#
# CONFIG_VIDEO_DEV is not set

#
# Digital Video Broadcasting Devices
#
# CONFIG_DVB is not set
# CONFIG_USB_DABUSB is not set

#
# Graphics support
#
CONFIG_FIRMWARE_EDID=y
CONFIG_FB=y
# CONFIG_FB_DDC is not set
CONFIG_FB_CFB_FILLRECT=y
CONFIG_FB_CFB_COPYAREA=y
CONFIG_FB_CFB_IMAGEBLIT=y
# CONFIG_FB_MACMODES is not set
# CONFIG_FB_BACKLIGHT is not set
CONFIG_FB_MODE_HELPERS=y
# CONFIG_FB_TILEBLITTING is not set
# CONFIG_FB_CIRRUS is not set
# CONFIG_FB_PM2 is not set
# CONFIG_FB_CYBER2000 is not set
# CONFIG_FB_ARC is not set
# CONFIG_FB_ASILIANT is not set
# CONFIG_FB_IMSTT is not set
# CONFIG_FB_VGA16 is not set
# CONFIG_FB_VESA is not set
# CONFIG_FB_HGA is not set
# CONFIG_FB_S1D13XXX is not set
CONFIG_FB_NVIDIA=y
CONFIG_FB_NVIDIA_I2C=y
# CONFIG_FB_RIVA is not set
# CONFIG_FB_INTEL is not set
# CONFIG_FB_MATROX is not set
# CONFIG_FB_RADEON is not set
# CONFIG_FB_ATY128 is not set
# CONFIG_FB_ATY is not set
# CONFIG_FB_SAVAGE is not set
# CONFIG_FB_SIS is not set
# CONFIG_FB_NEOMAGIC is not set
# CONFIG_FB_KYRO is not set
# CONFIG_FB_3DFX is not set
# CONFIG_FB_VOODOO1 is not set
# CONFIG_FB_TRIDENT is not set
# CONFIG_FB_GEODE is not set
# CONFIG_FB_VIRTUAL is not set

#
# Console display driver support
#
CONFIG_VGA_CONSOLE=y
CONFIG_VGACON_SOFT_SCROLLBACK=y
CONFIG_VGACON_SOFT_SCROLLBACK_SIZE=64
CONFIG_VIDEO_SELECT=y
CONFIG_DUMMY_CONSOLE=y
CONFIG_FRAMEBUFFER_CONSOLE=y
# CONFIG_FRAMEBUFFER_CONSOLE_ROTATION is not set
# CONFIG_FONTS is not set
CONFIG_FONT_8x8=y
CONFIG_FONT_8x16=y

#
# Logo configuration
#
# CONFIG_LOGO is not set
# CONFIG_BACKLIGHT_LCD_SUPPORT is not set

#
# Sound
#
# CONFIG_SOUND is not set

#
# USB support
#
CONFIG_USB_ARCH_HAS_HCD=y
CONFIG_USB_ARCH_HAS_OHCI=y
CONFIG_USB_ARCH_HAS_EHCI=y
CONFIG_USB=y
# CONFIG_USB_DEBUG is not set

#
# Miscellaneous USB options
#
CONFIG_USB_DEVICEFS=y
# CONFIG_USB_BANDWIDTH is not set
# CONFIG_USB_DYNAMIC_MINORS is not set
CONFIG_USB_SUSPEND=y
# CONFIG_USB_OTG is not set

#
# USB Host Controller Drivers
#
CONFIG_USB_EHCI_HCD=y
CONFIG_USB_EHCI_SPLIT_ISO=y
CONFIG_USB_EHCI_ROOT_HUB_TT=y
CONFIG_USB_EHCI_TT_NEWSCHED=y
# CONFIG_USB_ISP116X_HCD is not set
CONFIG_USB_OHCI_HCD=y
# CONFIG_USB_OHCI_BIG_ENDIAN is not set
CONFIG_USB_OHCI_LITTLE_ENDIAN=y
CONFIG_USB_UHCI_HCD=y
# CONFIG_USB_SL811_HCD is not set

#
# USB Device Class drivers
#
# CONFIG_USB_ACM is not set
# CONFIG_USB_PRINTER is not set

#
# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
#

#
# may also be needed; see USB_STORAGE Help for more information
#
# CONFIG_USB_STORAGE is not set
# CONFIG_USB_LIBUSUAL is not set

#
# USB Input Devices
#
CONFIG_USB_HID=y
CONFIG_USB_HIDINPUT=y
# CONFIG_USB_HIDINPUT_POWERBOOK is not set
# CONFIG_HID_FF is not set
CONFIG_USB_HIDDEV=y
# CONFIG_USB_AIPTEK is not set
# CONFIG_USB_WACOM is not set
# CONFIG_USB_ACECAD is not set
# CONFIG_USB_KBTAB is not set
# CONFIG_USB_POWERMATE is not set
# CONFIG_USB_TOUCHSCREEN is not set
# CONFIG_USB_YEALINK is not set
# CONFIG_USB_XPAD is not set
# CONFIG_USB_ATI_REMOTE is not set
# CONFIG_USB_ATI_REMOTE2 is not set
# CONFIG_USB_KEYSPAN_REMOTE is not set
# CONFIG_USB_APPLETOUCH is not set
# CONFIG_USB_TRANCEVIBRATOR is not set

#
# USB Imaging devices
#
# CONFIG_USB_MDC800 is not set
# CONFIG_USB_MICROTEK is not set

#
# USB Network Adapters
#
# CONFIG_USB_CATC is not set
# CONFIG_USB_KAWETH is not set
# CONFIG_USB_PEGASUS is not set
# CONFIG_USB_RTL8150 is not set
# CONFIG_USB_USBNET is not set
# CONFIG_USB_MON is not set

#
# USB port drivers
#
# CONFIG_USB_USS720 is not set

#
# USB Serial Converter support
#
# CONFIG_USB_SERIAL is not set

#
# USB Miscellaneous drivers
#
# CONFIG_USB_EMI62 is not set
# CONFIG_USB_EMI26 is not set
# CONFIG_USB_ADUTUX is not set
# CONFIG_USB_AUERSWALD is not set
# CONFIG_USB_RIO500 is not set
# CONFIG_USB_LEGOTOWER is not set
# CONFIG_USB_LCD is not set
# CONFIG_USB_LED is not set
# CONFIG_USB_CYPRESS_CY7C63 is not set
# CONFIG_USB_CYTHERM is not set
# CONFIG_USB_PHIDGET is not set
# CONFIG_USB_IDMOUSE is not set
# CONFIG_USB_FTDI_ELAN is not set
# CONFIG_USB_APPLEDISPLAY is not set
# CONFIG_USB_SISUSBVGA is not set
# CONFIG_USB_LD is not set
# CONFIG_USB_TEST is not set

#
# USB DSL modem support
#

#
# USB Gadget Support
#
# CONFIG_USB_GADGET is not set

#
# MMC/SD Card support
#
# CONFIG_MMC is not set

#
# LED devices
#
# CONFIG_NEW_LEDS is not set

#
# LED drivers
#

#
# LED Triggers
#

#
# InfiniBand support
#
# CONFIG_INFINIBAND is not set

#
# EDAC - error detection and reporting (RAS) (EXPERIMENTAL)
#
# CONFIG_EDAC is not set

#
# Real Time Clock
#
CONFIG_RTC_LIB=y
CONFIG_RTC_CLASS=y
CONFIG_RTC_HCTOSYS=y
CONFIG_RTC_HCTOSYS_DEVICE="rtc0"
# CONFIG_RTC_DEBUG is not set

#
# RTC interfaces
#
CONFIG_RTC_INTF_SYSFS=y
CONFIG_RTC_INTF_PROC=y
CONFIG_RTC_INTF_DEV=y
# CONFIG_RTC_INTF_DEV_UIE_EMUL is not set

#
# RTC drivers
#
# CONFIG_RTC_DRV_X1205 is not set
# CONFIG_RTC_DRV_DS1307 is not set
# CONFIG_RTC_DRV_DS1553 is not set
# CONFIG_RTC_DRV_ISL1208 is not set
# CONFIG_RTC_DRV_DS1672 is not set
# CONFIG_RTC_DRV_DS1742 is not set
# CONFIG_RTC_DRV_PCF8563 is not set
# CONFIG_RTC_DRV_PCF8583 is not set
# CONFIG_RTC_DRV_RS5C372 is not set
# CONFIG_RTC_DRV_M48T86 is not set
# CONFIG_RTC_DRV_TEST is not set
# CONFIG_RTC_DRV_V3020 is not set

#
# DMA Engine support
#
CONFIG_DMA_ENGINE=y

#
# DMA Clients
#
CONFIG_NET_DMA=y

#
# DMA Devices
#
CONFIG_INTEL_IOATDMA=y

#
# Firmware Drivers
#
# CONFIG_EDD is not set
# CONFIG_DELL_RBU is not set
# CONFIG_DCDBAS is not set

#
# File systems
#
CONFIG_EXT2_FS=y
CONFIG_EXT2_FS_XATTR=y
CONFIG_EXT2_FS_POSIX_ACL=y
CONFIG_EXT2_FS_SECURITY=y
# CONFIG_EXT2_FS_XIP is not set
CONFIG_EXT3_FS=y
CONFIG_EXT3_FS_XATTR=y
CONFIG_EXT3_FS_POSIX_ACL=y
CONFIG_EXT3_FS_SECURITY=y
CONFIG_JBD=y
# CONFIG_JBD_DEBUG is not set
CONFIG_FS_MBCACHE=y
CONFIG_REISERFS_FS=y
# CONFIG_REISERFS_CHECK is not set
# CONFIG_REISERFS_PROC_INFO is not set
CONFIG_REISERFS_FS_XATTR=y
CONFIG_REISERFS_FS_POSIX_ACL=y
CONFIG_REISERFS_FS_SECURITY=y
CONFIG_JFS_FS=y
CONFIG_JFS_POSIX_ACL=y
CONFIG_JFS_SECURITY=y
# CONFIG_JFS_DEBUG is not set
# CONFIG_JFS_STATISTICS is not set
CONFIG_FS_POSIX_ACL=y
CONFIG_XFS_FS=y
CONFIG_XFS_QUOTA=y
# CONFIG_XFS_SECURITY is not set
CONFIG_XFS_POSIX_ACL=y
# CONFIG_XFS_RT is not set
# CONFIG_GFS2_FS is not set
# CONFIG_OCFS2_FS is not set
# CONFIG_MINIX_FS is not set
CONFIG_ROMFS_FS=y
CONFIG_INOTIFY=y
CONFIG_INOTIFY_USER=y
CONFIG_QUOTA=y
# CONFIG_QFMT_V1 is not set
# CONFIG_QFMT_V2 is not set
CONFIG_QUOTACTL=y
CONFIG_DNOTIFY=y
CONFIG_AUTOFS_FS=y
CONFIG_AUTOFS4_FS=y
CONFIG_FUSE_FS=y

#
# CD-ROM/DVD Filesystems
#
CONFIG_ISO9660_FS=y
CONFIG_JOLIET=y
CONFIG_ZISOFS=y
CONFIG_ZISOFS_FS=y
CONFIG_UDF_FS=y
CONFIG_UDF_NLS=y

#
# DOS/FAT/NT Filesystems
#
CONFIG_FAT_FS=y
CONFIG_MSDOS_FS=y
CONFIG_VFAT_FS=y
CONFIG_FAT_DEFAULT_CODEPAGE=437
CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
# CONFIG_NTFS_FS is not set

#
# Pseudo filesystems
#
CONFIG_PROC_FS=y
CONFIG_PROC_KCORE=y
CONFIG_PROC_SYSCTL=y
CONFIG_SYSFS=y
CONFIG_TMPFS=y
# CONFIG_TMPFS_POSIX_ACL is not set
# CONFIG_HUGETLBFS is not set
# CONFIG_HUGETLB_PAGE is not set
CONFIG_RAMFS=y
CONFIG_CONFIGFS_FS=y

#
# Miscellaneous filesystems
#
# CONFIG_ADFS_FS is not set
# CONFIG_AFFS_FS is not set
# CONFIG_ECRYPT_FS is not set
# CONFIG_HFS_FS is not set
# CONFIG_HFSPLUS_FS is not set
# CONFIG_BEFS_FS is not set
# CONFIG_BFS_FS is not set
# CONFIG_EFS_FS is not set
CONFIG_CRAMFS=y
# CONFIG_VXFS_FS is not set
# CONFIG_HPFS_FS is not set
# CONFIG_QNX4FS_FS is not set
# CONFIG_SYSV_FS is not set
# CONFIG_UFS_FS is not set

#
# Network File Systems
#
CONFIG_NFS_FS=y
CONFIG_NFS_V3=y
CONFIG_NFS_V3_ACL=y
CONFIG_NFS_V4=y
CONFIG_NFS_DIRECTIO=y
CONFIG_NFSD=y
CONFIG_NFSD_V2_ACL=y
CONFIG_NFSD_V3=y
CONFIG_NFSD_V3_ACL=y
CONFIG_NFSD_V4=y
CONFIG_NFSD_TCP=y
CONFIG_LOCKD=y
CONFIG_LOCKD_V4=y
CONFIG_EXPORTFS=y
CONFIG_NFS_ACL_SUPPORT=y
CONFIG_NFS_COMMON=y
CONFIG_SUNRPC=y
CONFIG_SUNRPC_GSS=y
CONFIG_RPCSEC_GSS_KRB5=y
# CONFIG_RPCSEC_GSS_SPKM3 is not set
CONFIG_SMB_FS=y
# CONFIG_SMB_NLS_DEFAULT is not set
CONFIG_CIFS=y
# CONFIG_CIFS_STATS is not set
# CONFIG_CIFS_WEAK_PW_HASH is not set
# CONFIG_CIFS_XATTR is not set
# CONFIG_CIFS_DEBUG2 is not set
# CONFIG_CIFS_EXPERIMENTAL is not set
# CONFIG_NCP_FS is not set
# CONFIG_CODA_FS is not set
# CONFIG_AFS_FS is not set
# CONFIG_9P_FS is not set

#
# Partition Types
#
CONFIG_PARTITION_ADVANCED=y
CONFIG_ACORN_PARTITION=y
# CONFIG_ACORN_PARTITION_CUMANA is not set
# CONFIG_ACORN_PARTITION_EESOX is not set
CONFIG_ACORN_PARTITION_ICS=y
# CONFIG_ACORN_PARTITION_ADFS is not set
# CONFIG_ACORN_PARTITION_POWERTEC is not set
CONFIG_ACORN_PARTITION_RISCIX=y
CONFIG_OSF_PARTITION=y
CONFIG_AMIGA_PARTITION=y
CONFIG_ATARI_PARTITION=y
CONFIG_MAC_PARTITION=y
CONFIG_MSDOS_PARTITION=y
CONFIG_BSD_DISKLABEL=y
CONFIG_MINIX_SUBPARTITION=y
CONFIG_SOLARIS_X86_PARTITION=y
CONFIG_UNIXWARE_DISKLABEL=y
CONFIG_LDM_PARTITION=y
# CONFIG_LDM_DEBUG is not set
CONFIG_SGI_PARTITION=y
CONFIG_ULTRIX_PARTITION=y
CONFIG_SUN_PARTITION=y
CONFIG_KARMA_PARTITION=y
CONFIG_EFI_PARTITION=y

#
# Native Language Support
#
CONFIG_NLS=y
CONFIG_NLS_DEFAULT="iso8859-1"
# CONFIG_NLS_CODEPAGE_437 is not set
# CONFIG_NLS_CODEPAGE_737 is not set
# CONFIG_NLS_CODEPAGE_775 is not set
# CONFIG_NLS_CODEPAGE_850 is not set
# CONFIG_NLS_CODEPAGE_852 is not set
# CONFIG_NLS_CODEPAGE_855 is not set
# CONFIG_NLS_CODEPAGE_857 is not set
# CONFIG_NLS_CODEPAGE_860 is not set
# CONFIG_NLS_CODEPAGE_861 is not set
# CONFIG_NLS_CODEPAGE_862 is not set
# CONFIG_NLS_CODEPAGE_863 is not set
# CONFIG_NLS_CODEPAGE_864 is not set
# CONFIG_NLS_CODEPAGE_865 is not set
# CONFIG_NLS_CODEPAGE_866 is not set
# CONFIG_NLS_CODEPAGE_869 is not set
# CONFIG_NLS_CODEPAGE_936 is not set
# CONFIG_NLS_CODEPAGE_950 is not set
# CONFIG_NLS_CODEPAGE_932 is not set
# CONFIG_NLS_CODEPAGE_949 is not set
# CONFIG_NLS_CODEPAGE_874 is not set
# CONFIG_NLS_ISO8859_8 is not set
# CONFIG_NLS_CODEPAGE_1250 is not set
# CONFIG_NLS_CODEPAGE_1251 is not set
CONFIG_NLS_ASCII=y
# CONFIG_NLS_ISO8859_1 is not set
# CONFIG_NLS_ISO8859_2 is not set
# CONFIG_NLS_ISO8859_3 is not set
# CONFIG_NLS_ISO8859_4 is not set
# CONFIG_NLS_ISO8859_5 is not set
# CONFIG_NLS_ISO8859_6 is not set
# CONFIG_NLS_ISO8859_7 is not set
# CONFIG_NLS_ISO8859_9 is not set
# CONFIG_NLS_ISO8859_13 is not set
# CONFIG_NLS_ISO8859_14 is not set
# CONFIG_NLS_ISO8859_15 is not set
# CONFIG_NLS_KOI8_R is not set
# CONFIG_NLS_KOI8_U is not set
CONFIG_NLS_UTF8=y

#
# Distributed Lock Manager
#
# CONFIG_DLM is not set

#
# Instrumentation Support
#
CONFIG_PROFILING=y
CONFIG_OPROFILE=y
CONFIG_KPROBES=y

#
# Kernel hacking
#
CONFIG_TRACE_IRQFLAGS_SUPPORT=y
CONFIG_PRINTK_TIME=y
CONFIG_ENABLE_MUST_CHECK=y
CONFIG_MAGIC_SYSRQ=y
# CONFIG_UNUSED_SYMBOLS is not set
CONFIG_DEBUG_KERNEL=y
CONFIG_LOG_BUF_SHIFT=15
# CONFIG_DETECT_SOFTLOCKUP is not set
# CONFIG_SCHEDSTATS is not set
# CONFIG_DEBUG_SLAB is not set
# CONFIG_DEBUG_RT_MUTEXES is not set
# CONFIG_RT_MUTEX_TESTER is not set
# CONFIG_DEBUG_SPINLOCK is not set
# CONFIG_DEBUG_MUTEXES is not set
# CONFIG_DEBUG_RWSEMS is not set
# CONFIG_DEBUG_LOCK_ALLOC is not set
# CONFIG_PROVE_LOCKING is not set
# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
# CONFIG_DEBUG_KOBJECT is not set
# CONFIG_DEBUG_INFO is not set
# CONFIG_DEBUG_FS is not set
# CONFIG_DEBUG_VM is not set
# CONFIG_DEBUG_LIST is not set
# CONFIG_FRAME_POINTER is not set
# CONFIG_UNWIND_INFO is not set
CONFIG_FORCED_INLINING=y
# CONFIG_RCU_TORTURE_TEST is not set
# CONFIG_LKDTM is not set
# CONFIG_DEBUG_RODATA is not set
# CONFIG_IOMMU_DEBUG is not set
# CONFIG_DEBUG_STACKOVERFLOW is not set
# CONFIG_DEBUG_STACK_USAGE is not set

#
# Security options
#
CONFIG_KEYS=y
CONFIG_KEYS_DEBUG_PROC_KEYS=y
# CONFIG_SECURITY is not set

#
# Cryptographic options
#
CONFIG_CRYPTO=y
CONFIG_CRYPTO_ALGAPI=y
CONFIG_CRYPTO_HASH=y
CONFIG_CRYPTO_MANAGER=y
CONFIG_CRYPTO_HMAC=y
CONFIG_CRYPTO_NULL=y
CONFIG_CRYPTO_MD4=y
CONFIG_CRYPTO_MD5=y
CONFIG_CRYPTO_SHA1=y
# CONFIG_CRYPTO_SHA256 is not set
# CONFIG_CRYPTO_SHA512 is not set
# CONFIG_CRYPTO_WP512 is not set
# CONFIG_CRYPTO_TGR192 is not set
# CONFIG_CRYPTO_ECB is not set
# CONFIG_CRYPTO_CBC is not set
CONFIG_CRYPTO_DES=y
# CONFIG_CRYPTO_BLOWFISH is not set
# CONFIG_CRYPTO_TWOFISH is not set
# CONFIG_CRYPTO_TWOFISH_X86_64 is not set
# CONFIG_CRYPTO_SERPENT is not set
CONFIG_CRYPTO_AES=y
CONFIG_CRYPTO_AES_X86_64=y
CONFIG_CRYPTO_CAST5=y
# CONFIG_CRYPTO_CAST6 is not set
# CONFIG_CRYPTO_TEA is not set
# CONFIG_CRYPTO_ARC4 is not set
# CONFIG_CRYPTO_KHAZAD is not set
# CONFIG_CRYPTO_ANUBIS is not set
# CONFIG_CRYPTO_DEFLATE is not set
# CONFIG_CRYPTO_MICHAEL_MIC is not set
# CONFIG_CRYPTO_CRC32C is not set
# CONFIG_CRYPTO_TEST is not set

#
# Hardware crypto devices
#

#
# Library routines
#
CONFIG_CRC_CCITT=y
CONFIG_CRC16=y
CONFIG_CRC32=y
CONFIG_LIBCRC32C=y
CONFIG_ZLIB_INFLATE=y
CONFIG_PLIST=y
</config>

<diff>
diff --git a/drivers/serial/8250.c b/drivers/serial/8250.c
index e34bd03..60df916 100644
--- a/drivers/serial/8250.c
+++ b/drivers/serial/8250.c
@@ -2247,6 +2247,22 @@ static void serial8250_console_putchar(s
serial_out(up, UART_TX, ch);
}

+void lldb_wrch(int port_idx, char ch)
+{
+ serial8250_console_putchar((struct uart_port *)&serial8250_ports[port_idx], ch);
+}
+EXPORT_SYMBOL(lldb_wrch);
+
+void lldb_wrstr(int port_idx, const char *str)
+{
+ int ch;
+
+ while((ch = *str++)) {
+ lldb_wrch(port_idx, ch);
+ }
+}
+EXPORT_SYMBOL(lldb_wrstr);
+
/*
* Print a string to the serial port trying not to disturb
* any possible real use of the port...
diff --git a/drivers/video/Kconfig b/drivers/video/Kconfig
index daaa486..7a43020 100644
--- a/drivers/video/Kconfig
+++ b/drivers/video/Kconfig
@@ -701,7 +701,6 @@ config FB_NVIDIA
depends on FB && PCI
select I2C_ALGOBIT if FB_NVIDIA_I2C
select I2C if FB_NVIDIA_I2C
- select FB_DDC if FB_NVIDIA_I2C
select FB_MODE_HELPERS
select FB_CFB_FILLRECT
select FB_CFB_COPYAREA
diff --git a/drivers/video/nvidia/nv_hw.c b/drivers/video/nvidia/nv_hw.c
index 9ed640d..c075516 100644
--- a/drivers/video/nvidia/nv_hw.c
+++ b/drivers/video/nvidia/nv_hw.c
@@ -54,6 +54,8 @@ #include "nv_type.h"
#include "nv_local.h"
#include "nv_proto.h"

+#include <linux/lldb.h>
+
void NVLockUnlock(struct nvidia_par *par, int Lock)
{
u8 cr11;
@@ -141,16 +143,21 @@ typedef struct {
static void nvGetClocks(struct nvidia_par *par, unsigned int *MClk,
unsigned int *NVClk)
{
- unsigned int pll, N, M, MB, NB, P;
+ unsigned int pll, N, M, MB, NB, P, p4020;
+ char buf[200];

if (par->Architecture >= NV_ARCH_40) {
pll = NV_RD32(par->PMC, 0x4020);
+ p4020 = pll;
P = (pll >> 16) & 0x03;
pll = NV_RD32(par->PMC, 0x4024);
M = pll & 0xFF;
N = (pll >> 8) & 0xFF;
MB = (pll >> 16) & 0xFF;
NB = (pll >> 24) & 0xFF;
+ snprintf(buf, sizeof(buf), "\r\nnvGetClocks: arch=%d p4020=0x%08x p4024=0x%08x M=%d N=%d MB=%d NB=%d P=%d",
+ par->Architecture, p4020, pll, M, N, MB, NB, P);
+ LLDB_WRSTR(buf);
*MClk = ((N * NB * par->CrystalFreqKHz) / (M * MB)) >> P;

pll = NV_RD32(par->PMC, 0x4000);
diff --git a/drivers/video/nvidia/nv_i2c.c b/drivers/video/nvidia/nv_i2c.c
index e48de3c..19eef3a 100644
--- a/drivers/video/nvidia/nv_i2c.c
+++ b/drivers/video/nvidia/nv_i2c.c
@@ -160,12 +160,51 @@ void nvidia_delete_i2c_busses(struct nvi

}

+static u8 *nvidia_do_probe_i2c_edid(struct nvidia_i2c_chan *chan)
+{
+ u8 start = 0x0;
+ struct i2c_msg msgs[] = {
+ {
+ .addr = 0x50,
+ .len = 1,
+ .buf = &start,
+ }, {
+ .addr = 0x50,
+ .flags = I2C_M_RD,
+ .len = EDID_LENGTH,
+ },
+ };
+ u8 *buf;
+
+ if (!chan->par)
+ return NULL;
+
+ buf = kmalloc(EDID_LENGTH, GFP_KERNEL);
+ if (!buf) {
+ dev_warn(&chan->par->pci_dev->dev, "Out of memory!\n");
+ return NULL;
+ }
+ msgs[1].buf = buf;
+
+ if (i2c_transfer(&chan->adapter, msgs, 2) == 2)
+ return buf;
+ dev_dbg(&chan->par->pci_dev->dev, "Unable to read EDID block.\n");
+ kfree(buf);
+ return NULL;
+}
+
int nvidia_probe_i2c_connector(struct fb_info *info, int conn, u8 **out_edid)
{
struct nvidia_par *par = info->par;
- u8 *edid;
-
- edid = fb_ddc_read(&par->chan[conn - 1].adapter);
+ u8 *edid = NULL;
+ int i;
+
+ for (i = 0; i < 3; i++) {
+ /* Do the real work */
+ edid = nvidia_do_probe_i2c_edid(&par->chan[conn - 1]);
+ if (edid)
+ break;
+ }

if (!edid && conn == 1) {
/* try to get from firmware */
diff --git a/include/linux/lldb.h b/include/linux/lldb.h
new file mode 100644
index 0000000..728b990
--- /dev/null
+++ b/include/linux/lldb.h
@@ -0,0 +1,19 @@
+/*
+ * include/linux/lldb.h
+ *
+ * Low Level Debug capability.
+ * An implementation is in 8250.c which writes directly to a serial port.
+ *
+ * (C) Copyright 2006 Wink Saville
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; version 2
+ */
+
+extern void lldb_wrch(int port_idx, char ch);
+extern void lldb_wrstr(int port_idx, const char * str);
+
+#define LLDB_WRCH(ch) lldb_wrch(0, ch)
+#define LLDB_WRSTR(str) lldb_wrstr(0, str)
+
</diff>