Make the "samsung" directory and move the Samsung specific files to
there for maintaining the files relevant to Samsung.
Signed-off-by: Jaehoon Chung <[email protected]>
---
drivers/phy/Kconfig | 96 +----------------------
drivers/phy/Makefile | 14 +---
drivers/phy/samsung/Kconfig | 92 ++++++++++++++++++++++
drivers/phy/samsung/Makefile | 11 +++
drivers/phy/{ => samsung}/phy-exynos-dp-video.c | 0
drivers/phy/{ => samsung}/phy-exynos-mipi-video.c | 0
drivers/phy/{ => samsung}/phy-exynos-pcie.c | 0
drivers/phy/{ => samsung}/phy-exynos4210-usb2.c | 0
drivers/phy/{ => samsung}/phy-exynos4x12-usb2.c | 0
drivers/phy/{ => samsung}/phy-exynos5-usbdrd.c | 0
drivers/phy/{ => samsung}/phy-exynos5250-sata.c | 0
drivers/phy/{ => samsung}/phy-exynos5250-usb2.c | 0
drivers/phy/{ => samsung}/phy-s5pv210-usb2.c | 0
drivers/phy/{ => samsung}/phy-samsung-usb2.c | 0
drivers/phy/{ => samsung}/phy-samsung-usb2.h | 0
15 files changed, 108 insertions(+), 105 deletions(-)
create mode 100644 drivers/phy/samsung/Kconfig
create mode 100644 drivers/phy/samsung/Makefile
rename drivers/phy/{ => samsung}/phy-exynos-dp-video.c (100%)
rename drivers/phy/{ => samsung}/phy-exynos-mipi-video.c (100%)
rename drivers/phy/{ => samsung}/phy-exynos-pcie.c (100%)
rename drivers/phy/{ => samsung}/phy-exynos4210-usb2.c (100%)
rename drivers/phy/{ => samsung}/phy-exynos4x12-usb2.c (100%)
rename drivers/phy/{ => samsung}/phy-exynos5-usbdrd.c (100%)
rename drivers/phy/{ => samsung}/phy-exynos5250-sata.c (100%)
rename drivers/phy/{ => samsung}/phy-exynos5250-usb2.c (100%)
rename drivers/phy/{ => samsung}/phy-s5pv210-usb2.c (100%)
rename drivers/phy/{ => samsung}/phy-samsung-usb2.c (100%)
rename drivers/phy/{ => samsung}/phy-samsung-usb2.h (100%)
diff --git a/drivers/phy/Kconfig b/drivers/phy/Kconfig
index dc5277a..10de740 100644
--- a/drivers/phy/Kconfig
+++ b/drivers/phy/Kconfig
@@ -72,16 +72,6 @@ config PHY_DM816X_USB
help
Enable this for dm816x USB to work.
-config PHY_EXYNOS_MIPI_VIDEO
- tristate "S5P/EXYNOS SoC series MIPI CSI-2/DSI PHY driver"
- depends on HAS_IOMEM
- depends on ARCH_S5PV210 || ARCH_EXYNOS || COMPILE_TEST
- select GENERIC_PHY
- default y if ARCH_S5PV210 || ARCH_EXYNOS
- help
- Support for MIPI CSI-2 and MIPI DSI DPHY found on Samsung S5P
- and EXYNOS SoCs.
-
config PHY_LPC18XX_USB_OTG
tristate "NXP LPC18xx/43xx SoC USB OTG PHY driver"
depends on OF && (ARCH_LPC18XX || COMPILE_TEST)
@@ -194,15 +184,6 @@ config TWL4030_USB
This transceiver supports high and full speed devices plus,
in host mode, low speed.
-config PHY_EXYNOS_DP_VIDEO
- tristate "EXYNOS SoC series Display Port PHY driver"
- depends on OF
- depends on ARCH_EXYNOS || COMPILE_TEST
- default ARCH_EXYNOS
- select GENERIC_PHY
- help
- Support for Display Port PHY found on Samsung EXYNOS SoCs.
-
config BCM_KONA_USB2_PHY
tristate "Broadcom Kona USB2 PHY Driver"
depends on HAS_IOMEM
@@ -210,21 +191,6 @@ config BCM_KONA_USB2_PHY
help
Enable this to support the Broadcom Kona USB 2.0 PHY.
-config PHY_EXYNOS5250_SATA
- tristate "Exynos5250 Sata SerDes/PHY driver"
- depends on SOC_EXYNOS5250
- depends on HAS_IOMEM
- depends on OF
- select GENERIC_PHY
- select I2C
- select I2C_S3C2410
- select MFD_SYSCON
- help
- Enable this to support SATA SerDes/Phy found on Samsung's
- Exynos5250 based SoCs.This SerDes/Phy supports SATA 1.5 Gb/s,
- SATA 3.0 Gb/s, SATA 6.0 Gb/s speeds. It supports one SATA host
- port to accept one SATA device.
-
config PHY_HIX5HD2_SATA
tristate "HIX5HD2 SATA PHY Driver"
depends on ARCH_HIX5HD2 && OF && HAS_IOMEM
@@ -280,65 +246,6 @@ config PHY_SUN9I_USB
This driver controls each individual USB 2 host PHY.
-config PHY_SAMSUNG_USB2
- tristate "Samsung USB 2.0 PHY driver"
- depends on HAS_IOMEM
- depends on USB_EHCI_EXYNOS || USB_OHCI_EXYNOS || USB_DWC2
- select GENERIC_PHY
- select MFD_SYSCON
- default ARCH_EXYNOS
- help
- Enable this to support the Samsung USB 2.0 PHY driver for Samsung
- SoCs. This driver provides the interface for USB 2.0 PHY. Support
- for particular PHYs will be enabled based on the SoC type in addition
- to this driver.
-
-config PHY_S5PV210_USB2
- bool "Support for S5PV210"
- depends on PHY_SAMSUNG_USB2
- depends on ARCH_S5PV210
- help
- Enable USB PHY support for S5PV210. This option requires that Samsung
- USB 2.0 PHY driver is enabled and means that support for this
- particular SoC is compiled in the driver. In case of S5PV210 two phys
- are available - device and host.
-
-config PHY_EXYNOS4210_USB2
- bool
- depends on PHY_SAMSUNG_USB2
- default CPU_EXYNOS4210
-
-config PHY_EXYNOS4X12_USB2
- bool
- depends on PHY_SAMSUNG_USB2
- default SOC_EXYNOS3250 || SOC_EXYNOS4212 || SOC_EXYNOS4412
-
-config PHY_EXYNOS5250_USB2
- bool
- depends on PHY_SAMSUNG_USB2
- default SOC_EXYNOS5250 || SOC_EXYNOS5420
-
-config PHY_EXYNOS5_USBDRD
- tristate "Exynos5 SoC series USB DRD PHY driver"
- depends on ARCH_EXYNOS && OF
- depends on HAS_IOMEM
- depends on USB_DWC3_EXYNOS
- select GENERIC_PHY
- select MFD_SYSCON
- default y
- help
- Enable USB DRD PHY support for Exynos 5 SoC series.
- This driver provides PHY interface for USB 3.0 DRD controller
- present on Exynos5 SoC series.
-
-config PHY_EXYNOS_PCIE
- bool "Exynos PCIe PHY driver"
- depends on OF && (ARCH_EXYNOS || COMPILE_TEST)
- select GENERIC_PHY
- help
- Enable PCIe PHY support for Exynos SoC series.
- This driver provides PHY interface for Exynos PCIe controller.
-
config PHY_PISTACHIO_USB
tristate "IMG Pistachio USB2.0 PHY driver"
depends on MACH_PISTACHIO
@@ -518,4 +425,7 @@ config PHY_NSP_USB3
help
Enable this to support the Broadcom Northstar plus USB3 PHY.
If unsure, say N.
+
+source "drivers/phy/samsung/Kconfig"
+
endmenu
diff --git a/drivers/phy/Makefile b/drivers/phy/Makefile
index e7b0feb..c39c3c4 100644
--- a/drivers/phy/Makefile
+++ b/drivers/phy/Makefile
@@ -2,6 +2,8 @@
# Makefile for the phy drivers.
#
+obj-$(CONFIG_ARCH_EXYNOS) += samsung/
+
obj-$(CONFIG_GENERIC_PHY) += phy-core.o
obj-$(CONFIG_PHY_BCM_NS_USB2) += phy-bcm-ns-usb2.o
obj-$(CONFIG_PHY_BCM_NS_USB3) += phy-bcm-ns-usb3.o
@@ -11,8 +13,6 @@ obj-$(CONFIG_PHY_DA8XX_USB) += phy-da8xx-usb.o
obj-$(CONFIG_PHY_DM816X_USB) += phy-dm816x-usb.o
obj-$(CONFIG_ARMADA375_USBCLUSTER_PHY) += phy-armada375-usb2.o
obj-$(CONFIG_BCM_KONA_USB2_PHY) += phy-bcm-kona-usb2.o
-obj-$(CONFIG_PHY_EXYNOS_DP_VIDEO) += phy-exynos-dp-video.o
-obj-$(CONFIG_PHY_EXYNOS_MIPI_VIDEO) += phy-exynos-mipi-video.o
obj-$(CONFIG_PHY_LPC18XX_USB_OTG) += phy-lpc18xx-usb-otg.o
obj-$(CONFIG_PHY_PXA_28NM_USB2) += phy-pxa-28nm-usb2.o
obj-$(CONFIG_PHY_PXA_28NM_HSIC) += phy-pxa-28nm-hsic.o
@@ -24,20 +24,10 @@ obj-$(CONFIG_OMAP_CONTROL_PHY) += phy-omap-control.o
obj-$(CONFIG_OMAP_USB2) += phy-omap-usb2.o
obj-$(CONFIG_TI_PIPE3) += phy-ti-pipe3.o
obj-$(CONFIG_TWL4030_USB) += phy-twl4030-usb.o
-obj-$(CONFIG_PHY_EXYNOS5250_SATA) += phy-exynos5250-sata.o
-obj-$(CONFIG_PHY_HIX5HD2_SATA) += phy-hix5hd2-sata.o
obj-$(CONFIG_PHY_HI6220_USB) += phy-hi6220-usb.o
obj-$(CONFIG_PHY_MT65XX_USB3) += phy-mt65xx-usb3.o
obj-$(CONFIG_PHY_SUN4I_USB) += phy-sun4i-usb.o
obj-$(CONFIG_PHY_SUN9I_USB) += phy-sun9i-usb.o
-obj-$(CONFIG_PHY_SAMSUNG_USB2) += phy-exynos-usb2.o
-phy-exynos-usb2-y += phy-samsung-usb2.o
-phy-exynos-usb2-$(CONFIG_PHY_EXYNOS4210_USB2) += phy-exynos4210-usb2.o
-phy-exynos-usb2-$(CONFIG_PHY_EXYNOS4X12_USB2) += phy-exynos4x12-usb2.o
-phy-exynos-usb2-$(CONFIG_PHY_EXYNOS5250_USB2) += phy-exynos5250-usb2.o
-phy-exynos-usb2-$(CONFIG_PHY_S5PV210_USB2) += phy-s5pv210-usb2.o
-obj-$(CONFIG_PHY_EXYNOS5_USBDRD) += phy-exynos5-usbdrd.o
-obj-$(CONFIG_PHY_EXYNOS_PCIE) += phy-exynos-pcie.o
obj-$(CONFIG_PHY_QCOM_APQ8064_SATA) += phy-qcom-apq8064-sata.o
obj-$(CONFIG_PHY_ROCKCHIP_USB) += phy-rockchip-usb.o
obj-$(CONFIG_PHY_ROCKCHIP_INNO_USB2) += phy-rockchip-inno-usb2.o
diff --git a/drivers/phy/samsung/Kconfig b/drivers/phy/samsung/Kconfig
new file mode 100644
index 0000000..f1226c0
--- /dev/null
+++ b/drivers/phy/samsung/Kconfig
@@ -0,0 +1,92 @@
+config PHY_EXYNOS_MIPI_VIDEO
+ tristate "S5P/EXYNOS SoC series MIPI CSI-2/DSI PHY driver"
+ depends on HAS_IOMEM
+ depends on ARCH_S5PV210 || ARCH_EXYNOS || COMPILE_TEST
+ select GENERIC_PHY
+ default y if ARCH_S5PV210 || ARCH_EXYNOS
+ help
+ Support for MIPI CSI-2 and MIPI DSI DPHY found on Samsung S5P
+ and EXYNOS SoCs.
+
+config PHY_EXYNOS_DP_VIDEO
+ tristate "EXYNOS SoC series Display Port PHY driver"
+ depends on OF
+ depends on ARCH_EXYNOS || COMPILE_TEST
+ default ARCH_EXYNOS
+ select GENERIC_PHY
+ help
+ Support for Display Port PHY found on Samsung EXYNOS SoCs.
+
+config PHY_EXYNOS5250_SATA
+ tristate "Exynos5250 Sata SerDes/PHY driver"
+ depends on SOC_EXYNOS5250
+ depends on HAS_IOMEM
+ depends on OF
+ select GENERIC_PHY
+ select I2C
+ select I2C_S3C2410
+ select MFD_SYSCON
+ help
+ Enable this to support SATA SerDes/Phy found on Samsung's
+ Exynos5250 based SoCs.This SerDes/Phy supports SATA 1.5 Gb/s,
+ SATA 3.0 Gb/s, SATA 6.0 Gb/s speeds. It supports one SATA host
+ port to accept one SATA device.
+
+config PHY_SAMSUNG_USB2
+ tristate "Samsung USB 2.0 PHY driver"
+ depends on HAS_IOMEM
+ depends on USB_EHCI_EXYNOS || USB_OHCI_EXYNOS || USB_DWC2
+ select GENERIC_PHY
+ select MFD_SYSCON
+ default ARCH_EXYNOS
+ help
+ Enable this to support the Samsung USB 2.0 PHY driver for Samsung
+ SoCs. This driver provides the interface for USB 2.0 PHY. Support
+ for particular PHYs will be enabled based on the SoC type in addition
+ to this driver.
+
+config PHY_S5PV210_USB2
+ bool "Support for S5PV210"
+ depends on PHY_SAMSUNG_USB2
+ depends on ARCH_S5PV210
+ help
+ Enable USB PHY support for S5PV210. This option requires that Samsung
+ USB 2.0 PHY driver is enabled and means that support for this
+ particular SoC is compiled in the driver. In case of S5PV210 two phys
+ are available - device and host.
+
+config PHY_EXYNOS4210_USB2
+ bool
+ depends on PHY_SAMSUNG_USB2
+ default CPU_EXYNOS4210
+
+config PHY_EXYNOS4X12_USB2
+ bool
+ depends on PHY_SAMSUNG_USB2
+ default SOC_EXYNOS3250 || SOC_EXYNOS4212 || SOC_EXYNOS4412
+
+config PHY_EXYNOS5250_USB2
+ bool
+ depends on PHY_SAMSUNG_USB2
+ default SOC_EXYNOS5250 || SOC_EXYNOS5420
+
+config PHY_EXYNOS5_USBDRD
+ tristate "Exynos5 SoC series USB DRD PHY driver"
+ depends on ARCH_EXYNOS && OF
+ depends on HAS_IOMEM
+ depends on USB_DWC3_EXYNOS
+ select GENERIC_PHY
+ select MFD_SYSCON
+ default y
+ help
+ Enable USB DRD PHY support for Exynos 5 SoC series.
+ This driver provides PHY interface for USB 3.0 DRD controller
+ present on Exynos5 SoC series.
+
+config PHY_EXYNOS_PCIE
+ bool "Exynos PCIe PHY driver"
+ depends on OF && (ARCH_EXYNOS || COMPILE_TEST)
+ select GENERIC_PHY
+ help
+ Enable PCIe PHY support for Exynos SoC series.
+ This driver provides PHY interface for Exynos PCIe controller.
diff --git a/drivers/phy/samsung/Makefile b/drivers/phy/samsung/Makefile
new file mode 100644
index 0000000..bbafe19
--- /dev/null
+++ b/drivers/phy/samsung/Makefile
@@ -0,0 +1,11 @@
+obj-$(CONFIG_PHY_EXYNOS_DP_VIDEO) += phy-exynos-dp-video.o
+obj-$(CONFIG_PHY_EXYNOS_MIPI_VIDEO) += phy-exynos-mipi-video.o
+obj-$(CONFIG_PHY_EXYNOS5250_SATA) += phy-exynos5250-sata.o
+obj-$(CONFIG_PHY_SAMSUNG_USB2) += phy-exynos-usb2.o
+phy-exynos-usb2-y += phy-samsung-usb2.o
+phy-exynos-usb2-$(CONFIG_PHY_EXYNOS4210_USB2) += phy-exynos4210-usb2.o
+phy-exynos-usb2-$(CONFIG_PHY_EXYNOS4X12_USB2) += phy-exynos4x12-usb2.o
+phy-exynos-usb2-$(CONFIG_PHY_EXYNOS5250_USB2) += phy-exynos5250-usb2.o
+phy-exynos-usb2-$(CONFIG_PHY_S5PV210_USB2) += phy-s5pv210-usb2.o
+obj-$(CONFIG_PHY_EXYNOS5_USBDRD) += phy-exynos5-usbdrd.o
+obj-$(CONFIG_PHY_EXYNOS_PCIE) += phy-exynos-pcie.o
diff --git a/drivers/phy/phy-exynos-dp-video.c b/drivers/phy/samsung/phy-exynos-dp-video.c
similarity index 100%
rename from drivers/phy/phy-exynos-dp-video.c
rename to drivers/phy/samsung/phy-exynos-dp-video.c
diff --git a/drivers/phy/phy-exynos-mipi-video.c b/drivers/phy/samsung/phy-exynos-mipi-video.c
similarity index 100%
rename from drivers/phy/phy-exynos-mipi-video.c
rename to drivers/phy/samsung/phy-exynos-mipi-video.c
diff --git a/drivers/phy/phy-exynos-pcie.c b/drivers/phy/samsung/phy-exynos-pcie.c
similarity index 100%
rename from drivers/phy/phy-exynos-pcie.c
rename to drivers/phy/samsung/phy-exynos-pcie.c
diff --git a/drivers/phy/phy-exynos4210-usb2.c b/drivers/phy/samsung/phy-exynos4210-usb2.c
similarity index 100%
rename from drivers/phy/phy-exynos4210-usb2.c
rename to drivers/phy/samsung/phy-exynos4210-usb2.c
diff --git a/drivers/phy/phy-exynos4x12-usb2.c b/drivers/phy/samsung/phy-exynos4x12-usb2.c
similarity index 100%
rename from drivers/phy/phy-exynos4x12-usb2.c
rename to drivers/phy/samsung/phy-exynos4x12-usb2.c
diff --git a/drivers/phy/phy-exynos5-usbdrd.c b/drivers/phy/samsung/phy-exynos5-usbdrd.c
similarity index 100%
rename from drivers/phy/phy-exynos5-usbdrd.c
rename to drivers/phy/samsung/phy-exynos5-usbdrd.c
diff --git a/drivers/phy/phy-exynos5250-sata.c b/drivers/phy/samsung/phy-exynos5250-sata.c
similarity index 100%
rename from drivers/phy/phy-exynos5250-sata.c
rename to drivers/phy/samsung/phy-exynos5250-sata.c
diff --git a/drivers/phy/phy-exynos5250-usb2.c b/drivers/phy/samsung/phy-exynos5250-usb2.c
similarity index 100%
rename from drivers/phy/phy-exynos5250-usb2.c
rename to drivers/phy/samsung/phy-exynos5250-usb2.c
diff --git a/drivers/phy/phy-s5pv210-usb2.c b/drivers/phy/samsung/phy-s5pv210-usb2.c
similarity index 100%
rename from drivers/phy/phy-s5pv210-usb2.c
rename to drivers/phy/samsung/phy-s5pv210-usb2.c
diff --git a/drivers/phy/phy-samsung-usb2.c b/drivers/phy/samsung/phy-samsung-usb2.c
similarity index 100%
rename from drivers/phy/phy-samsung-usb2.c
rename to drivers/phy/samsung/phy-samsung-usb2.c
diff --git a/drivers/phy/phy-samsung-usb2.h b/drivers/phy/samsung/phy-samsung-usb2.h
similarity index 100%
rename from drivers/phy/phy-samsung-usb2.h
rename to drivers/phy/samsung/phy-samsung-usb2.h
--
2.10.2
Hi,
On Thursday 09 March 2017 05:03 PM, Jaehoon Chung wrote:
> Make the "samsung" directory and move the Samsung specific files to
> there for maintaining the files relevant to Samsung.
The number of phy drivers in drivers/phy is getting unmanageable. I think this
is a good step to make it a little better. Can you also add a MAINTAINER for
drivers/phy/samsung?
Thanks
Kishon
>
> Signed-off-by: Jaehoon Chung <[email protected]>
> ---
> drivers/phy/Kconfig | 96 +----------------------
> drivers/phy/Makefile | 14 +---
> drivers/phy/samsung/Kconfig | 92 ++++++++++++++++++++++
> drivers/phy/samsung/Makefile | 11 +++
> drivers/phy/{ => samsung}/phy-exynos-dp-video.c | 0
> drivers/phy/{ => samsung}/phy-exynos-mipi-video.c | 0
> drivers/phy/{ => samsung}/phy-exynos-pcie.c | 0
> drivers/phy/{ => samsung}/phy-exynos4210-usb2.c | 0
> drivers/phy/{ => samsung}/phy-exynos4x12-usb2.c | 0
> drivers/phy/{ => samsung}/phy-exynos5-usbdrd.c | 0
> drivers/phy/{ => samsung}/phy-exynos5250-sata.c | 0
> drivers/phy/{ => samsung}/phy-exynos5250-usb2.c | 0
> drivers/phy/{ => samsung}/phy-s5pv210-usb2.c | 0
> drivers/phy/{ => samsung}/phy-samsung-usb2.c | 0
> drivers/phy/{ => samsung}/phy-samsung-usb2.h | 0
> 15 files changed, 108 insertions(+), 105 deletions(-)
> create mode 100644 drivers/phy/samsung/Kconfig
> create mode 100644 drivers/phy/samsung/Makefile
> rename drivers/phy/{ => samsung}/phy-exynos-dp-video.c (100%)
> rename drivers/phy/{ => samsung}/phy-exynos-mipi-video.c (100%)
> rename drivers/phy/{ => samsung}/phy-exynos-pcie.c (100%)
> rename drivers/phy/{ => samsung}/phy-exynos4210-usb2.c (100%)
> rename drivers/phy/{ => samsung}/phy-exynos4x12-usb2.c (100%)
> rename drivers/phy/{ => samsung}/phy-exynos5-usbdrd.c (100%)
> rename drivers/phy/{ => samsung}/phy-exynos5250-sata.c (100%)
> rename drivers/phy/{ => samsung}/phy-exynos5250-usb2.c (100%)
> rename drivers/phy/{ => samsung}/phy-s5pv210-usb2.c (100%)
> rename drivers/phy/{ => samsung}/phy-samsung-usb2.c (100%)
> rename drivers/phy/{ => samsung}/phy-samsung-usb2.h (100%)
>
> diff --git a/drivers/phy/Kconfig b/drivers/phy/Kconfig
> index dc5277a..10de740 100644
> --- a/drivers/phy/Kconfig
> +++ b/drivers/phy/Kconfig
> @@ -72,16 +72,6 @@ config PHY_DM816X_USB
> help
> Enable this for dm816x USB to work.
>
> -config PHY_EXYNOS_MIPI_VIDEO
> - tristate "S5P/EXYNOS SoC series MIPI CSI-2/DSI PHY driver"
> - depends on HAS_IOMEM
> - depends on ARCH_S5PV210 || ARCH_EXYNOS || COMPILE_TEST
> - select GENERIC_PHY
> - default y if ARCH_S5PV210 || ARCH_EXYNOS
> - help
> - Support for MIPI CSI-2 and MIPI DSI DPHY found on Samsung S5P
> - and EXYNOS SoCs.
> -
> config PHY_LPC18XX_USB_OTG
> tristate "NXP LPC18xx/43xx SoC USB OTG PHY driver"
> depends on OF && (ARCH_LPC18XX || COMPILE_TEST)
> @@ -194,15 +184,6 @@ config TWL4030_USB
> This transceiver supports high and full speed devices plus,
> in host mode, low speed.
>
> -config PHY_EXYNOS_DP_VIDEO
> - tristate "EXYNOS SoC series Display Port PHY driver"
> - depends on OF
> - depends on ARCH_EXYNOS || COMPILE_TEST
> - default ARCH_EXYNOS
> - select GENERIC_PHY
> - help
> - Support for Display Port PHY found on Samsung EXYNOS SoCs.
> -
> config BCM_KONA_USB2_PHY
> tristate "Broadcom Kona USB2 PHY Driver"
> depends on HAS_IOMEM
> @@ -210,21 +191,6 @@ config BCM_KONA_USB2_PHY
> help
> Enable this to support the Broadcom Kona USB 2.0 PHY.
>
> -config PHY_EXYNOS5250_SATA
> - tristate "Exynos5250 Sata SerDes/PHY driver"
> - depends on SOC_EXYNOS5250
> - depends on HAS_IOMEM
> - depends on OF
> - select GENERIC_PHY
> - select I2C
> - select I2C_S3C2410
> - select MFD_SYSCON
> - help
> - Enable this to support SATA SerDes/Phy found on Samsung's
> - Exynos5250 based SoCs.This SerDes/Phy supports SATA 1.5 Gb/s,
> - SATA 3.0 Gb/s, SATA 6.0 Gb/s speeds. It supports one SATA host
> - port to accept one SATA device.
> -
> config PHY_HIX5HD2_SATA
> tristate "HIX5HD2 SATA PHY Driver"
> depends on ARCH_HIX5HD2 && OF && HAS_IOMEM
> @@ -280,65 +246,6 @@ config PHY_SUN9I_USB
>
> This driver controls each individual USB 2 host PHY.
>
> -config PHY_SAMSUNG_USB2
> - tristate "Samsung USB 2.0 PHY driver"
> - depends on HAS_IOMEM
> - depends on USB_EHCI_EXYNOS || USB_OHCI_EXYNOS || USB_DWC2
> - select GENERIC_PHY
> - select MFD_SYSCON
> - default ARCH_EXYNOS
> - help
> - Enable this to support the Samsung USB 2.0 PHY driver for Samsung
> - SoCs. This driver provides the interface for USB 2.0 PHY. Support
> - for particular PHYs will be enabled based on the SoC type in addition
> - to this driver.
> -
> -config PHY_S5PV210_USB2
> - bool "Support for S5PV210"
> - depends on PHY_SAMSUNG_USB2
> - depends on ARCH_S5PV210
> - help
> - Enable USB PHY support for S5PV210. This option requires that Samsung
> - USB 2.0 PHY driver is enabled and means that support for this
> - particular SoC is compiled in the driver. In case of S5PV210 two phys
> - are available - device and host.
> -
> -config PHY_EXYNOS4210_USB2
> - bool
> - depends on PHY_SAMSUNG_USB2
> - default CPU_EXYNOS4210
> -
> -config PHY_EXYNOS4X12_USB2
> - bool
> - depends on PHY_SAMSUNG_USB2
> - default SOC_EXYNOS3250 || SOC_EXYNOS4212 || SOC_EXYNOS4412
> -
> -config PHY_EXYNOS5250_USB2
> - bool
> - depends on PHY_SAMSUNG_USB2
> - default SOC_EXYNOS5250 || SOC_EXYNOS5420
> -
> -config PHY_EXYNOS5_USBDRD
> - tristate "Exynos5 SoC series USB DRD PHY driver"
> - depends on ARCH_EXYNOS && OF
> - depends on HAS_IOMEM
> - depends on USB_DWC3_EXYNOS
> - select GENERIC_PHY
> - select MFD_SYSCON
> - default y
> - help
> - Enable USB DRD PHY support for Exynos 5 SoC series.
> - This driver provides PHY interface for USB 3.0 DRD controller
> - present on Exynos5 SoC series.
> -
> -config PHY_EXYNOS_PCIE
> - bool "Exynos PCIe PHY driver"
> - depends on OF && (ARCH_EXYNOS || COMPILE_TEST)
> - select GENERIC_PHY
> - help
> - Enable PCIe PHY support for Exynos SoC series.
> - This driver provides PHY interface for Exynos PCIe controller.
> -
> config PHY_PISTACHIO_USB
> tristate "IMG Pistachio USB2.0 PHY driver"
> depends on MACH_PISTACHIO
> @@ -518,4 +425,7 @@ config PHY_NSP_USB3
> help
> Enable this to support the Broadcom Northstar plus USB3 PHY.
> If unsure, say N.
> +
> +source "drivers/phy/samsung/Kconfig"
> +
> endmenu
> diff --git a/drivers/phy/Makefile b/drivers/phy/Makefile
> index e7b0feb..c39c3c4 100644
> --- a/drivers/phy/Makefile
> +++ b/drivers/phy/Makefile
> @@ -2,6 +2,8 @@
> # Makefile for the phy drivers.
> #
>
> +obj-$(CONFIG_ARCH_EXYNOS) += samsung/
> +
> obj-$(CONFIG_GENERIC_PHY) += phy-core.o
> obj-$(CONFIG_PHY_BCM_NS_USB2) += phy-bcm-ns-usb2.o
> obj-$(CONFIG_PHY_BCM_NS_USB3) += phy-bcm-ns-usb3.o
> @@ -11,8 +13,6 @@ obj-$(CONFIG_PHY_DA8XX_USB) += phy-da8xx-usb.o
> obj-$(CONFIG_PHY_DM816X_USB) += phy-dm816x-usb.o
> obj-$(CONFIG_ARMADA375_USBCLUSTER_PHY) += phy-armada375-usb2.o
> obj-$(CONFIG_BCM_KONA_USB2_PHY) += phy-bcm-kona-usb2.o
> -obj-$(CONFIG_PHY_EXYNOS_DP_VIDEO) += phy-exynos-dp-video.o
> -obj-$(CONFIG_PHY_EXYNOS_MIPI_VIDEO) += phy-exynos-mipi-video.o
> obj-$(CONFIG_PHY_LPC18XX_USB_OTG) += phy-lpc18xx-usb-otg.o
> obj-$(CONFIG_PHY_PXA_28NM_USB2) += phy-pxa-28nm-usb2.o
> obj-$(CONFIG_PHY_PXA_28NM_HSIC) += phy-pxa-28nm-hsic.o
> @@ -24,20 +24,10 @@ obj-$(CONFIG_OMAP_CONTROL_PHY) += phy-omap-control.o
> obj-$(CONFIG_OMAP_USB2) += phy-omap-usb2.o
> obj-$(CONFIG_TI_PIPE3) += phy-ti-pipe3.o
> obj-$(CONFIG_TWL4030_USB) += phy-twl4030-usb.o
> -obj-$(CONFIG_PHY_EXYNOS5250_SATA) += phy-exynos5250-sata.o
> -obj-$(CONFIG_PHY_HIX5HD2_SATA) += phy-hix5hd2-sata.o
> obj-$(CONFIG_PHY_HI6220_USB) += phy-hi6220-usb.o
> obj-$(CONFIG_PHY_MT65XX_USB3) += phy-mt65xx-usb3.o
> obj-$(CONFIG_PHY_SUN4I_USB) += phy-sun4i-usb.o
> obj-$(CONFIG_PHY_SUN9I_USB) += phy-sun9i-usb.o
> -obj-$(CONFIG_PHY_SAMSUNG_USB2) += phy-exynos-usb2.o
> -phy-exynos-usb2-y += phy-samsung-usb2.o
> -phy-exynos-usb2-$(CONFIG_PHY_EXYNOS4210_USB2) += phy-exynos4210-usb2.o
> -phy-exynos-usb2-$(CONFIG_PHY_EXYNOS4X12_USB2) += phy-exynos4x12-usb2.o
> -phy-exynos-usb2-$(CONFIG_PHY_EXYNOS5250_USB2) += phy-exynos5250-usb2.o
> -phy-exynos-usb2-$(CONFIG_PHY_S5PV210_USB2) += phy-s5pv210-usb2.o
> -obj-$(CONFIG_PHY_EXYNOS5_USBDRD) += phy-exynos5-usbdrd.o
> -obj-$(CONFIG_PHY_EXYNOS_PCIE) += phy-exynos-pcie.o
> obj-$(CONFIG_PHY_QCOM_APQ8064_SATA) += phy-qcom-apq8064-sata.o
> obj-$(CONFIG_PHY_ROCKCHIP_USB) += phy-rockchip-usb.o
> obj-$(CONFIG_PHY_ROCKCHIP_INNO_USB2) += phy-rockchip-inno-usb2.o
> diff --git a/drivers/phy/samsung/Kconfig b/drivers/phy/samsung/Kconfig
> new file mode 100644
> index 0000000..f1226c0
> --- /dev/null
> +++ b/drivers/phy/samsung/Kconfig
> @@ -0,0 +1,92 @@
> +config PHY_EXYNOS_MIPI_VIDEO
> + tristate "S5P/EXYNOS SoC series MIPI CSI-2/DSI PHY driver"
> + depends on HAS_IOMEM
> + depends on ARCH_S5PV210 || ARCH_EXYNOS || COMPILE_TEST
> + select GENERIC_PHY
> + default y if ARCH_S5PV210 || ARCH_EXYNOS
> + help
> + Support for MIPI CSI-2 and MIPI DSI DPHY found on Samsung S5P
> + and EXYNOS SoCs.
> +
> +config PHY_EXYNOS_DP_VIDEO
> + tristate "EXYNOS SoC series Display Port PHY driver"
> + depends on OF
> + depends on ARCH_EXYNOS || COMPILE_TEST
> + default ARCH_EXYNOS
> + select GENERIC_PHY
> + help
> + Support for Display Port PHY found on Samsung EXYNOS SoCs.
> +
> +config PHY_EXYNOS5250_SATA
> + tristate "Exynos5250 Sata SerDes/PHY driver"
> + depends on SOC_EXYNOS5250
> + depends on HAS_IOMEM
> + depends on OF
> + select GENERIC_PHY
> + select I2C
> + select I2C_S3C2410
> + select MFD_SYSCON
> + help
> + Enable this to support SATA SerDes/Phy found on Samsung's
> + Exynos5250 based SoCs.This SerDes/Phy supports SATA 1.5 Gb/s,
> + SATA 3.0 Gb/s, SATA 6.0 Gb/s speeds. It supports one SATA host
> + port to accept one SATA device.
> +
> +config PHY_SAMSUNG_USB2
> + tristate "Samsung USB 2.0 PHY driver"
> + depends on HAS_IOMEM
> + depends on USB_EHCI_EXYNOS || USB_OHCI_EXYNOS || USB_DWC2
> + select GENERIC_PHY
> + select MFD_SYSCON
> + default ARCH_EXYNOS
> + help
> + Enable this to support the Samsung USB 2.0 PHY driver for Samsung
> + SoCs. This driver provides the interface for USB 2.0 PHY. Support
> + for particular PHYs will be enabled based on the SoC type in addition
> + to this driver.
> +
> +config PHY_S5PV210_USB2
> + bool "Support for S5PV210"
> + depends on PHY_SAMSUNG_USB2
> + depends on ARCH_S5PV210
> + help
> + Enable USB PHY support for S5PV210. This option requires that Samsung
> + USB 2.0 PHY driver is enabled and means that support for this
> + particular SoC is compiled in the driver. In case of S5PV210 two phys
> + are available - device and host.
> +
> +config PHY_EXYNOS4210_USB2
> + bool
> + depends on PHY_SAMSUNG_USB2
> + default CPU_EXYNOS4210
> +
> +config PHY_EXYNOS4X12_USB2
> + bool
> + depends on PHY_SAMSUNG_USB2
> + default SOC_EXYNOS3250 || SOC_EXYNOS4212 || SOC_EXYNOS4412
> +
> +config PHY_EXYNOS5250_USB2
> + bool
> + depends on PHY_SAMSUNG_USB2
> + default SOC_EXYNOS5250 || SOC_EXYNOS5420
> +
> +config PHY_EXYNOS5_USBDRD
> + tristate "Exynos5 SoC series USB DRD PHY driver"
> + depends on ARCH_EXYNOS && OF
> + depends on HAS_IOMEM
> + depends on USB_DWC3_EXYNOS
> + select GENERIC_PHY
> + select MFD_SYSCON
> + default y
> + help
> + Enable USB DRD PHY support for Exynos 5 SoC series.
> + This driver provides PHY interface for USB 3.0 DRD controller
> + present on Exynos5 SoC series.
> +
> +config PHY_EXYNOS_PCIE
> + bool "Exynos PCIe PHY driver"
> + depends on OF && (ARCH_EXYNOS || COMPILE_TEST)
> + select GENERIC_PHY
> + help
> + Enable PCIe PHY support for Exynos SoC series.
> + This driver provides PHY interface for Exynos PCIe controller.
> diff --git a/drivers/phy/samsung/Makefile b/drivers/phy/samsung/Makefile
> new file mode 100644
> index 0000000..bbafe19
> --- /dev/null
> +++ b/drivers/phy/samsung/Makefile
> @@ -0,0 +1,11 @@
> +obj-$(CONFIG_PHY_EXYNOS_DP_VIDEO) += phy-exynos-dp-video.o
> +obj-$(CONFIG_PHY_EXYNOS_MIPI_VIDEO) += phy-exynos-mipi-video.o
> +obj-$(CONFIG_PHY_EXYNOS5250_SATA) += phy-exynos5250-sata.o
> +obj-$(CONFIG_PHY_SAMSUNG_USB2) += phy-exynos-usb2.o
> +phy-exynos-usb2-y += phy-samsung-usb2.o
> +phy-exynos-usb2-$(CONFIG_PHY_EXYNOS4210_USB2) += phy-exynos4210-usb2.o
> +phy-exynos-usb2-$(CONFIG_PHY_EXYNOS4X12_USB2) += phy-exynos4x12-usb2.o
> +phy-exynos-usb2-$(CONFIG_PHY_EXYNOS5250_USB2) += phy-exynos5250-usb2.o
> +phy-exynos-usb2-$(CONFIG_PHY_S5PV210_USB2) += phy-s5pv210-usb2.o
> +obj-$(CONFIG_PHY_EXYNOS5_USBDRD) += phy-exynos5-usbdrd.o
> +obj-$(CONFIG_PHY_EXYNOS_PCIE) += phy-exynos-pcie.o
> diff --git a/drivers/phy/phy-exynos-dp-video.c b/drivers/phy/samsung/phy-exynos-dp-video.c
> similarity index 100%
> rename from drivers/phy/phy-exynos-dp-video.c
> rename to drivers/phy/samsung/phy-exynos-dp-video.c
> diff --git a/drivers/phy/phy-exynos-mipi-video.c b/drivers/phy/samsung/phy-exynos-mipi-video.c
> similarity index 100%
> rename from drivers/phy/phy-exynos-mipi-video.c
> rename to drivers/phy/samsung/phy-exynos-mipi-video.c
> diff --git a/drivers/phy/phy-exynos-pcie.c b/drivers/phy/samsung/phy-exynos-pcie.c
> similarity index 100%
> rename from drivers/phy/phy-exynos-pcie.c
> rename to drivers/phy/samsung/phy-exynos-pcie.c
> diff --git a/drivers/phy/phy-exynos4210-usb2.c b/drivers/phy/samsung/phy-exynos4210-usb2.c
> similarity index 100%
> rename from drivers/phy/phy-exynos4210-usb2.c
> rename to drivers/phy/samsung/phy-exynos4210-usb2.c
> diff --git a/drivers/phy/phy-exynos4x12-usb2.c b/drivers/phy/samsung/phy-exynos4x12-usb2.c
> similarity index 100%
> rename from drivers/phy/phy-exynos4x12-usb2.c
> rename to drivers/phy/samsung/phy-exynos4x12-usb2.c
> diff --git a/drivers/phy/phy-exynos5-usbdrd.c b/drivers/phy/samsung/phy-exynos5-usbdrd.c
> similarity index 100%
> rename from drivers/phy/phy-exynos5-usbdrd.c
> rename to drivers/phy/samsung/phy-exynos5-usbdrd.c
> diff --git a/drivers/phy/phy-exynos5250-sata.c b/drivers/phy/samsung/phy-exynos5250-sata.c
> similarity index 100%
> rename from drivers/phy/phy-exynos5250-sata.c
> rename to drivers/phy/samsung/phy-exynos5250-sata.c
> diff --git a/drivers/phy/phy-exynos5250-usb2.c b/drivers/phy/samsung/phy-exynos5250-usb2.c
> similarity index 100%
> rename from drivers/phy/phy-exynos5250-usb2.c
> rename to drivers/phy/samsung/phy-exynos5250-usb2.c
> diff --git a/drivers/phy/phy-s5pv210-usb2.c b/drivers/phy/samsung/phy-s5pv210-usb2.c
> similarity index 100%
> rename from drivers/phy/phy-s5pv210-usb2.c
> rename to drivers/phy/samsung/phy-s5pv210-usb2.c
> diff --git a/drivers/phy/phy-samsung-usb2.c b/drivers/phy/samsung/phy-samsung-usb2.c
> similarity index 100%
> rename from drivers/phy/phy-samsung-usb2.c
> rename to drivers/phy/samsung/phy-samsung-usb2.c
> diff --git a/drivers/phy/phy-samsung-usb2.h b/drivers/phy/samsung/phy-samsung-usb2.h
> similarity index 100%
> rename from drivers/phy/phy-samsung-usb2.h
> rename to drivers/phy/samsung/phy-samsung-usb2.h
>
On Thu, Mar 9, 2017 at 1:56 PM, Kishon Vijay Abraham I <[email protected]> wrote:
> Hi,
>
> On Thursday 09 March 2017 05:03 PM, Jaehoon Chung wrote:
>> Make the "samsung" directory and move the Samsung specific files to
>> there for maintaining the files relevant to Samsung.
>
> The number of phy drivers in drivers/phy is getting unmanageable. I think this
> is a good step to make it a little better. Can you also add a MAINTAINER for
> drivers/phy/samsung?
There is such:
10903 SAMSUNG USB2 PHY DRIVER
10904 M: Kamil Debski <[email protected]>
10905 M: Sylwester Nawrocki <[email protected]>
10906 L: [email protected]
10907 S: Supported
10908 F: Documentation/devicetree/bindings/phy/samsung-phy.txt
10909 F: Documentation/phy/samsung-usb2.txt
10910 F: drivers/phy/phy-exynos4210-usb2.c
10911 F: drivers/phy/phy-exynos4x12-usb2.c
10912 F: drivers/phy/phy-exynos5250-usb2.c
10913 F: drivers/phy/phy-s5pv210-usb2.c
10914 F: drivers/phy/phy-samsung-usb2.c
10915 F: drivers/phy/phy-samsung-usb2.h
but this patchset does not update it. Paths *everywhere* have to be updated.
Best regards,
Krzysztof
Hi All,
On 03/09/2017 09:10 PM, Krzysztof Kozlowski wrote:
> On Thu, Mar 9, 2017 at 1:56 PM, Kishon Vijay Abraham I <[email protected]> wrote:
>> Hi,
>>
>> On Thursday 09 March 2017 05:03 PM, Jaehoon Chung wrote:
>>> Make the "samsung" directory and move the Samsung specific files to
>>> there for maintaining the files relevant to Samsung.
>>
>> The number of phy drivers in drivers/phy is getting unmanageable. I think this
>> is a good step to make it a little better. Can you also add a MAINTAINER for
>> drivers/phy/samsung?
>
> There is such:
>
> 10903 SAMSUNG USB2 PHY DRIVER
> 10904 M: Kamil Debski <[email protected]>
> 10905 M: Sylwester Nawrocki <[email protected]>
> 10906 L: [email protected]
> 10907 S: Supported
> 10908 F: Documentation/devicetree/bindings/phy/samsung-phy.txt
> 10909 F: Documentation/phy/samsung-usb2.txt
> 10910 F: drivers/phy/phy-exynos4210-usb2.c
> 10911 F: drivers/phy/phy-exynos4x12-usb2.c
> 10912 F: drivers/phy/phy-exynos5250-usb2.c
> 10913 F: drivers/phy/phy-s5pv210-usb2.c
> 10914 F: drivers/phy/phy-samsung-usb2.c
> 10915 F: drivers/phy/phy-samsung-usb2.h
>
> but this patchset does not update it. Paths *everywhere* have to be updated.
Will update..How about the below updating?
M: Kamil Debski <[email protected]>
M: Sylwester Nawrocki <[email protected]>
M: Jaehoon Chung <[email protected]>
L: [email protected]
S: Supported
F: Documentation/devicetree/bindings/phy/samsung-phy.txt
F: Documentation/phy/samsung-usb2.txt
F: driver/phy/samsung/
Let me know your opinion.
Best Regards,
Jaehoon Chung
>
> Best regards,
> Krzysztof
>
>
>
Hi,
On Friday 10 March 2017 12:30 PM, Jaehoon Chung wrote:
> Hi All,
>
> On 03/09/2017 09:10 PM, Krzysztof Kozlowski wrote:
>> On Thu, Mar 9, 2017 at 1:56 PM, Kishon Vijay Abraham I <[email protected]> wrote:
>>> Hi,
>>>
>>> On Thursday 09 March 2017 05:03 PM, Jaehoon Chung wrote:
>>>> Make the "samsung" directory and move the Samsung specific files to
>>>> there for maintaining the files relevant to Samsung.
>>>
>>> The number of phy drivers in drivers/phy is getting unmanageable. I think this
>>> is a good step to make it a little better. Can you also add a MAINTAINER for
>>> drivers/phy/samsung?
>>
>> There is such:
>>
>> 10903 SAMSUNG USB2 PHY DRIVER
>> 10904 M: Kamil Debski <[email protected]>
>> 10905 M: Sylwester Nawrocki <[email protected]>
>> 10906 L: [email protected]
>> 10907 S: Supported
>> 10908 F: Documentation/devicetree/bindings/phy/samsung-phy.txt
>> 10909 F: Documentation/phy/samsung-usb2.txt
>> 10910 F: drivers/phy/phy-exynos4210-usb2.c
>> 10911 F: drivers/phy/phy-exynos4x12-usb2.c
>> 10912 F: drivers/phy/phy-exynos5250-usb2.c
>> 10913 F: drivers/phy/phy-s5pv210-usb2.c
>> 10914 F: drivers/phy/phy-samsung-usb2.c
>> 10915 F: drivers/phy/phy-samsung-usb2.h
>>
>> but this patchset does not update it. Paths *everywhere* have to be updated.
>
> Will update..How about the below updating?
> M: Kamil Debski <[email protected]>
> M: Sylwester Nawrocki <[email protected]>
> M: Jaehoon Chung <[email protected]>
> L: [email protected]
> S: Supported
> F: Documentation/devicetree/bindings/phy/samsung-phy.txt
> F: Documentation/phy/samsung-usb2.txt
> F: driver/phy/samsung/
>
> Let me know your opinion.
Looks good to me.
Thanks
Kishon
>
> Best Regards,
> Jaehoon Chung
>
>>
>> Best regards,
>> Krzysztof
>>
>>
>>
>
On Fri, Mar 10, 2017 at 9:00 AM, Jaehoon Chung <[email protected]> wrote:
> Hi All,
>
> On 03/09/2017 09:10 PM, Krzysztof Kozlowski wrote:
>> On Thu, Mar 9, 2017 at 1:56 PM, Kishon Vijay Abraham I <[email protected]> wrote:
>>> Hi,
>>>
>>> On Thursday 09 March 2017 05:03 PM, Jaehoon Chung wrote:
>>>> Make the "samsung" directory and move the Samsung specific files to
>>>> there for maintaining the files relevant to Samsung.
>>>
>>> The number of phy drivers in drivers/phy is getting unmanageable. I think this
>>> is a good step to make it a little better. Can you also add a MAINTAINER for
>>> drivers/phy/samsung?
>>
>> There is such:
>>
>> 10903 SAMSUNG USB2 PHY DRIVER
>> 10904 M: Kamil Debski <[email protected]>
>> 10905 M: Sylwester Nawrocki <[email protected]>
>> 10906 L: [email protected]
>> 10907 S: Supported
>> 10908 F: Documentation/devicetree/bindings/phy/samsung-phy.txt
>> 10909 F: Documentation/phy/samsung-usb2.txt
>> 10910 F: drivers/phy/phy-exynos4210-usb2.c
>> 10911 F: drivers/phy/phy-exynos4x12-usb2.c
>> 10912 F: drivers/phy/phy-exynos5250-usb2.c
>> 10913 F: drivers/phy/phy-s5pv210-usb2.c
>> 10914 F: drivers/phy/phy-samsung-usb2.c
>> 10915 F: drivers/phy/phy-samsung-usb2.h
>>
>> but this patchset does not update it. Paths *everywhere* have to be updated.
>
> Will update..How about the below updating?
> M: Kamil Debski <[email protected]>
> M: Sylwester Nawrocki <[email protected]>
> M: Jaehoon Chung <[email protected]>
> L: [email protected]
> S: Supported
> F: Documentation/devicetree/bindings/phy/samsung-phy.txt
> F: Documentation/phy/samsung-usb2.txt
> F: driver/phy/samsung/
Hm? Except recent phy-exynos-pcie you did not contribute to other PHY
drivers. You did not reviewed them on the lists. I think that
maintenance starts with reviewing... which did not happen in this
case.
Did you discuss it with existing maintainers (I know that Sylwester is
too polite... but I do not care about politics and I can say straight
from the shoulder).
Maybe you wanted:
SAMSUNG PHY DRIVERS
M: Kamil Debski <[email protected]>
M: Sylwester Nawrocki <[email protected]>
L: [email protected]
S: Supported
F: Documentation/devicetree/bindings/phy/samsung-phy.txt
F: Documentation/phy/samsung-usb2.txt
F: driver/phy/samsung/
SAMSUNG PCIE PHY DRIVER
M: Jaehoon Chung <[email protected]>
L: [email protected]
S: Supported
F: driver/phy/samsung/phy-exynos-pcie.c
That looks much more sensible to me.
Best regards,
Krzysztof
Hi Kishon,
On Thu, Mar 9, 2017 at 5:26 PM, Kishon Vijay Abraham I <[email protected]> wrote:
> Hi,
>
> On Thursday 09 March 2017 05:03 PM, Jaehoon Chung wrote:
>> Make the "samsung" directory and move the Samsung specific files to
>> there for maintaining the files relevant to Samsung.
>
> The number of phy drivers in drivers/phy is getting unmanageable. I think this
> is a good step to make it a little better. Can you also add a MAINTAINER for
> drivers/phy/samsung?
I remember making a similar attempt in past [1], but that time we couldn't
reach an agreement as to whether group the phy drivers based on
vendors or based on the type of phy.
If you are fine with grouping the drivers for each vendor, I hope you can
consider picking that patch (I can respin the patch based on linux-phy/next).
Other driver maintainers were also cool with that older patch.
Let me know your comments.
[1] https://patchwork.kernel.org/patch/8762561/
Regards
Vivek
>
> Thanks
> Kishon
>>
>> Signed-off-by: Jaehoon Chung <[email protected]>
>> ---
>> drivers/phy/Kconfig | 96 +----------------------
>> drivers/phy/Makefile | 14 +---
>> drivers/phy/samsung/Kconfig | 92 ++++++++++++++++++++++
>> drivers/phy/samsung/Makefile | 11 +++
>> drivers/phy/{ => samsung}/phy-exynos-dp-video.c | 0
>> drivers/phy/{ => samsung}/phy-exynos-mipi-video.c | 0
>> drivers/phy/{ => samsung}/phy-exynos-pcie.c | 0
>> drivers/phy/{ => samsung}/phy-exynos4210-usb2.c | 0
>> drivers/phy/{ => samsung}/phy-exynos4x12-usb2.c | 0
>> drivers/phy/{ => samsung}/phy-exynos5-usbdrd.c | 0
>> drivers/phy/{ => samsung}/phy-exynos5250-sata.c | 0
>> drivers/phy/{ => samsung}/phy-exynos5250-usb2.c | 0
>> drivers/phy/{ => samsung}/phy-s5pv210-usb2.c | 0
>> drivers/phy/{ => samsung}/phy-samsung-usb2.c | 0
>> drivers/phy/{ => samsung}/phy-samsung-usb2.h | 0
>> 15 files changed, 108 insertions(+), 105 deletions(-)
>> create mode 100644 drivers/phy/samsung/Kconfig
>> create mode 100644 drivers/phy/samsung/Makefile
>> rename drivers/phy/{ => samsung}/phy-exynos-dp-video.c (100%)
>> rename drivers/phy/{ => samsung}/phy-exynos-mipi-video.c (100%)
>> rename drivers/phy/{ => samsung}/phy-exynos-pcie.c (100%)
>> rename drivers/phy/{ => samsung}/phy-exynos4210-usb2.c (100%)
>> rename drivers/phy/{ => samsung}/phy-exynos4x12-usb2.c (100%)
>> rename drivers/phy/{ => samsung}/phy-exynos5-usbdrd.c (100%)
>> rename drivers/phy/{ => samsung}/phy-exynos5250-sata.c (100%)
>> rename drivers/phy/{ => samsung}/phy-exynos5250-usb2.c (100%)
>> rename drivers/phy/{ => samsung}/phy-s5pv210-usb2.c (100%)
>> rename drivers/phy/{ => samsung}/phy-samsung-usb2.c (100%)
>> rename drivers/phy/{ => samsung}/phy-samsung-usb2.h (100%)
[snip]
--
Qualcomm Innovation Center, Inc. is a member of Code Aurora Forum,
a Linux Foundation Collaborative Project
On Sun, Mar 12, 2017 at 11:18 AM, Vivek Gautam
<[email protected]> wrote:
> Hi Kishon,
>
>
> On Thu, Mar 9, 2017 at 5:26 PM, Kishon Vijay Abraham I <[email protected]> wrote:
>> Hi,
>>
>> On Thursday 09 March 2017 05:03 PM, Jaehoon Chung wrote:
>>> Make the "samsung" directory and move the Samsung specific files to
>>> there for maintaining the files relevant to Samsung.
>>
>> The number of phy drivers in drivers/phy is getting unmanageable. I think this
>> is a good step to make it a little better. Can you also add a MAINTAINER for
>> drivers/phy/samsung?
>
> I remember making a similar attempt in past [1], but that time we couldn't
> reach an agreement as to whether group the phy drivers based on
> vendors or based on the type of phy.
>
> If you are fine with grouping the drivers for each vendor, I hope you can
> consider picking that patch (I can respin the patch based on linux-phy/next).
> Other driver maintainers were also cool with that older patch.
>
> Let me know your comments.
>
> [1] https://patchwork.kernel.org/patch/8762561/
I am fine with the vendor approach. We follow this also for other
sub-blocks, although usually they are strictly related to one type of
device (e.g. clock controller).
Best regards,
Krzysztof
On Sun, Mar 12, 2017 at 2:53 PM, Krzysztof Kozlowski <[email protected]> wrote:
> On Sun, Mar 12, 2017 at 11:18 AM, Vivek Gautam
> <[email protected]> wrote:
>> Hi Kishon,
>>
>>
>> On Thu, Mar 9, 2017 at 5:26 PM, Kishon Vijay Abraham I <[email protected]> wrote:
>>> Hi,
>>>
>>> On Thursday 09 March 2017 05:03 PM, Jaehoon Chung wrote:
>>>> Make the "samsung" directory and move the Samsung specific files to
>>>> there for maintaining the files relevant to Samsung.
>>>
>>> The number of phy drivers in drivers/phy is getting unmanageable. I think this
>>> is a good step to make it a little better. Can you also add a MAINTAINER for
>>> drivers/phy/samsung?
>>
>> I remember making a similar attempt in past [1], but that time we couldn't
>> reach an agreement as to whether group the phy drivers based on
>> vendors or based on the type of phy.
>>
>> If you are fine with grouping the drivers for each vendor, I hope you can
>> consider picking that patch (I can respin the patch based on linux-phy/next).
>> Other driver maintainers were also cool with that older patch.
>>
>> Let me know your comments.
>>
>> [1] https://patchwork.kernel.org/patch/8762561/
>
> I am fine with the vendor approach. We follow this also for other
> sub-blocks, although usually they are strictly related to one type of
> device (e.g. clock controller).
Right. Vendor approach gives us enough room.
Grouping based on the phy type doesn't allow few combo phys that
support multiple protocols (phy types).
Qualcomm's qmp phy is one such example. It is a phy that supports
PCIe, USB, UFS and few other phy types.
I believe there are other vendors as well that have combo phys
supporting multiple protocols.
Regards
Vivek
--
Qualcomm Innovation Center, Inc. is a member of Code Aurora Forum,
a Linux Foundation Collaborative Project
Hi Vivek,
On 03/12/2017 06:18 PM, Vivek Gautam wrote:
> Hi Kishon,
>
>
> On Thu, Mar 9, 2017 at 5:26 PM, Kishon Vijay Abraham I <[email protected]> wrote:
>> Hi,
>>
>> On Thursday 09 March 2017 05:03 PM, Jaehoon Chung wrote:
>>> Make the "samsung" directory and move the Samsung specific files to
>>> there for maintaining the files relevant to Samsung.
>>
>> The number of phy drivers in drivers/phy is getting unmanageable. I think this
>> is a good step to make it a little better. Can you also add a MAINTAINER for
>> drivers/phy/samsung?
>
> I remember making a similar attempt in past [1], but that time we couldn't
> reach an agreement as to whether group the phy drivers based on
> vendors or based on the type of phy.
>
> If you are fine with grouping the drivers for each vendor, I hope you can
> consider picking that patch (I can respin the patch based on linux-phy/next).
> Other driver maintainers were also cool with that older patch.
>
> Let me know your comments.
>
> [1] https://patchwork.kernel.org/patch/8762561/
I didn't know you had already sent the patches.
My RFC patch can be dropped. I think it's good way.
Best Regards,
Jaehoon Chung
>
> Regards
> Vivek
>
>>
>> Thanks
>> Kishon
>>>
>>> Signed-off-by: Jaehoon Chung <[email protected]>
>>> ---
>>> drivers/phy/Kconfig | 96 +----------------------
>>> drivers/phy/Makefile | 14 +---
>>> drivers/phy/samsung/Kconfig | 92 ++++++++++++++++++++++
>>> drivers/phy/samsung/Makefile | 11 +++
>>> drivers/phy/{ => samsung}/phy-exynos-dp-video.c | 0
>>> drivers/phy/{ => samsung}/phy-exynos-mipi-video.c | 0
>>> drivers/phy/{ => samsung}/phy-exynos-pcie.c | 0
>>> drivers/phy/{ => samsung}/phy-exynos4210-usb2.c | 0
>>> drivers/phy/{ => samsung}/phy-exynos4x12-usb2.c | 0
>>> drivers/phy/{ => samsung}/phy-exynos5-usbdrd.c | 0
>>> drivers/phy/{ => samsung}/phy-exynos5250-sata.c | 0
>>> drivers/phy/{ => samsung}/phy-exynos5250-usb2.c | 0
>>> drivers/phy/{ => samsung}/phy-s5pv210-usb2.c | 0
>>> drivers/phy/{ => samsung}/phy-samsung-usb2.c | 0
>>> drivers/phy/{ => samsung}/phy-samsung-usb2.h | 0
>>> 15 files changed, 108 insertions(+), 105 deletions(-)
>>> create mode 100644 drivers/phy/samsung/Kconfig
>>> create mode 100644 drivers/phy/samsung/Makefile
>>> rename drivers/phy/{ => samsung}/phy-exynos-dp-video.c (100%)
>>> rename drivers/phy/{ => samsung}/phy-exynos-mipi-video.c (100%)
>>> rename drivers/phy/{ => samsung}/phy-exynos-pcie.c (100%)
>>> rename drivers/phy/{ => samsung}/phy-exynos4210-usb2.c (100%)
>>> rename drivers/phy/{ => samsung}/phy-exynos4x12-usb2.c (100%)
>>> rename drivers/phy/{ => samsung}/phy-exynos5-usbdrd.c (100%)
>>> rename drivers/phy/{ => samsung}/phy-exynos5250-sata.c (100%)
>>> rename drivers/phy/{ => samsung}/phy-exynos5250-usb2.c (100%)
>>> rename drivers/phy/{ => samsung}/phy-s5pv210-usb2.c (100%)
>>> rename drivers/phy/{ => samsung}/phy-samsung-usb2.c (100%)
>>> rename drivers/phy/{ => samsung}/phy-samsung-usb2.h (100%)
>
> [snip]
>
>
>
Hi,
On Sunday 12 March 2017 02:48 PM, Vivek Gautam wrote:
> Hi Kishon,
>
>
> On Thu, Mar 9, 2017 at 5:26 PM, Kishon Vijay Abraham I <[email protected]> wrote:
>> Hi,
>>
>> On Thursday 09 March 2017 05:03 PM, Jaehoon Chung wrote:
>>> Make the "samsung" directory and move the Samsung specific files to
>>> there for maintaining the files relevant to Samsung.
>>
>> The number of phy drivers in drivers/phy is getting unmanageable. I think this
>> is a good step to make it a little better. Can you also add a MAINTAINER for
>> drivers/phy/samsung?
>
> I remember making a similar attempt in past [1], but that time we couldn't
> reach an agreement as to whether group the phy drivers based on
> vendors or based on the type of phy.
>
> If you are fine with grouping the drivers for each vendor, I hope you can
> consider picking that patch (I can respin the patch based on linux-phy/next).
> Other driver maintainers were also cool with that older patch.
Sure, you can re-spin the patch.
At that point of time I didn't think grouping phy drivers for each vendor is
required. But especially after [1] where I failed to notice an existing phy
driver can be reused and later has to be reverted. This could have been easily
identified by MAINTAINERS of that particular platform. That's why now I feel
grouping phy drivers and having a MAINTAINER for every vendor directory will
help to identify such issues.
Thanks
Kishon
[1]
https://git.kernel.org/pub/scm/linux/kernel/git/kishon/linux-phy.git/commit/?h=fixes&id=9200c6f177638909dbbaded8aeeeccbd48744400
>
> Let me know your comments.
>
> [1] https://patchwork.kernel.org/patch/8762561/
>
> Regards
> Vivek
>
>>
>> Thanks
>> Kishon
>>>
>>> Signed-off-by: Jaehoon Chung <[email protected]>
>>> ---
>>> drivers/phy/Kconfig | 96 +----------------------
>>> drivers/phy/Makefile | 14 +---
>>> drivers/phy/samsung/Kconfig | 92 ++++++++++++++++++++++
>>> drivers/phy/samsung/Makefile | 11 +++
>>> drivers/phy/{ => samsung}/phy-exynos-dp-video.c | 0
>>> drivers/phy/{ => samsung}/phy-exynos-mipi-video.c | 0
>>> drivers/phy/{ => samsung}/phy-exynos-pcie.c | 0
>>> drivers/phy/{ => samsung}/phy-exynos4210-usb2.c | 0
>>> drivers/phy/{ => samsung}/phy-exynos4x12-usb2.c | 0
>>> drivers/phy/{ => samsung}/phy-exynos5-usbdrd.c | 0
>>> drivers/phy/{ => samsung}/phy-exynos5250-sata.c | 0
>>> drivers/phy/{ => samsung}/phy-exynos5250-usb2.c | 0
>>> drivers/phy/{ => samsung}/phy-s5pv210-usb2.c | 0
>>> drivers/phy/{ => samsung}/phy-samsung-usb2.c | 0
>>> drivers/phy/{ => samsung}/phy-samsung-usb2.h | 0
>>> 15 files changed, 108 insertions(+), 105 deletions(-)
>>> create mode 100644 drivers/phy/samsung/Kconfig
>>> create mode 100644 drivers/phy/samsung/Makefile
>>> rename drivers/phy/{ => samsung}/phy-exynos-dp-video.c (100%)
>>> rename drivers/phy/{ => samsung}/phy-exynos-mipi-video.c (100%)
>>> rename drivers/phy/{ => samsung}/phy-exynos-pcie.c (100%)
>>> rename drivers/phy/{ => samsung}/phy-exynos4210-usb2.c (100%)
>>> rename drivers/phy/{ => samsung}/phy-exynos4x12-usb2.c (100%)
>>> rename drivers/phy/{ => samsung}/phy-exynos5-usbdrd.c (100%)
>>> rename drivers/phy/{ => samsung}/phy-exynos5250-sata.c (100%)
>>> rename drivers/phy/{ => samsung}/phy-exynos5250-usb2.c (100%)
>>> rename drivers/phy/{ => samsung}/phy-s5pv210-usb2.c (100%)
>>> rename drivers/phy/{ => samsung}/phy-samsung-usb2.c (100%)
>>> rename drivers/phy/{ => samsung}/phy-samsung-usb2.h (100%)
>
> [snip]
>
>
>
Hi Kishon,
On Mon, Mar 13, 2017 at 10:51 AM, Kishon Vijay Abraham I <[email protected]> wrote:
> Hi,
>
> On Sunday 12 March 2017 02:48 PM, Vivek Gautam wrote:
>> Hi Kishon,
>>
>>
>> On Thu, Mar 9, 2017 at 5:26 PM, Kishon Vijay Abraham I <[email protected]> wrote:
>>> Hi,
>>>
>>> On Thursday 09 March 2017 05:03 PM, Jaehoon Chung wrote:
>>>> Make the "samsung" directory and move the Samsung specific files to
>>>> there for maintaining the files relevant to Samsung.
>>>
>>> The number of phy drivers in drivers/phy is getting unmanageable. I think this
>>> is a good step to make it a little better. Can you also add a MAINTAINER for
>>> drivers/phy/samsung?
>>
>> I remember making a similar attempt in past [1], but that time we couldn't
>> reach an agreement as to whether group the phy drivers based on
>> vendors or based on the type of phy.
>>
>> If you are fine with grouping the drivers for each vendor, I hope you can
>> consider picking that patch (I can respin the patch based on linux-phy/next).
>> Other driver maintainers were also cool with that older patch.
>
> Sure, you can re-spin the patch.
Thanks, will re-spin the patch.
>
> At that point of time I didn't think grouping phy drivers for each vendor is
> required. But especially after [1] where I failed to notice an existing phy
> driver can be reused and later has to be reverted. This could have been easily
> identified by MAINTAINERS of that particular platform. That's why now I feel
> grouping phy drivers and having a MAINTAINER for every vendor directory will
> help to identify such issues.
I will be able to update the MAINTAINERS file for the directory structure
change only, like I did in my earlier version.
We will have to ask each vendors to pull in vendors for each directory.
Regards
Vivek
>
> Thanks
> Kishon
>
> [1]
> https://git.kernel.org/pub/scm/linux/kernel/git/kishon/linux-phy.git/commit/?h=fixes&id=9200c6f177638909dbbaded8aeeeccbd48744400
>>
>> Let me know your comments.
>>
>> [1] https://patchwork.kernel.org/patch/8762561/
>>
>> Regards
>> Vivek
>>
>>>
>>> Thanks
>>> Kishon
>>>>
>>>> Signed-off-by: Jaehoon Chung <[email protected]>
>>>> ---
>>>> drivers/phy/Kconfig | 96 +----------------------
>>>> drivers/phy/Makefile | 14 +---
>>>> drivers/phy/samsung/Kconfig | 92 ++++++++++++++++++++++
>>>> drivers/phy/samsung/Makefile | 11 +++
>>>> drivers/phy/{ => samsung}/phy-exynos-dp-video.c | 0
>>>> drivers/phy/{ => samsung}/phy-exynos-mipi-video.c | 0
>>>> drivers/phy/{ => samsung}/phy-exynos-pcie.c | 0
>>>> drivers/phy/{ => samsung}/phy-exynos4210-usb2.c | 0
>>>> drivers/phy/{ => samsung}/phy-exynos4x12-usb2.c | 0
>>>> drivers/phy/{ => samsung}/phy-exynos5-usbdrd.c | 0
>>>> drivers/phy/{ => samsung}/phy-exynos5250-sata.c | 0
>>>> drivers/phy/{ => samsung}/phy-exynos5250-usb2.c | 0
>>>> drivers/phy/{ => samsung}/phy-s5pv210-usb2.c | 0
>>>> drivers/phy/{ => samsung}/phy-samsung-usb2.c | 0
>>>> drivers/phy/{ => samsung}/phy-samsung-usb2.h | 0
>>>> 15 files changed, 108 insertions(+), 105 deletions(-)
>>>> create mode 100644 drivers/phy/samsung/Kconfig
>>>> create mode 100644 drivers/phy/samsung/Makefile
>>>> rename drivers/phy/{ => samsung}/phy-exynos-dp-video.c (100%)
>>>> rename drivers/phy/{ => samsung}/phy-exynos-mipi-video.c (100%)
>>>> rename drivers/phy/{ => samsung}/phy-exynos-pcie.c (100%)
>>>> rename drivers/phy/{ => samsung}/phy-exynos4210-usb2.c (100%)
>>>> rename drivers/phy/{ => samsung}/phy-exynos4x12-usb2.c (100%)
>>>> rename drivers/phy/{ => samsung}/phy-exynos5-usbdrd.c (100%)
>>>> rename drivers/phy/{ => samsung}/phy-exynos5250-sata.c (100%)
>>>> rename drivers/phy/{ => samsung}/phy-exynos5250-usb2.c (100%)
>>>> rename drivers/phy/{ => samsung}/phy-s5pv210-usb2.c (100%)
>>>> rename drivers/phy/{ => samsung}/phy-samsung-usb2.c (100%)
>>>> rename drivers/phy/{ => samsung}/phy-samsung-usb2.h (100%)
>>
>> [snip]
>>
>>
>>
--
Qualcomm Innovation Center, Inc. is a member of Code Aurora Forum,
a Linux Foundation Collaborative Project
Hi Jaehoon,
On Mon, Mar 13, 2017 at 4:48 AM, Jaehoon Chung <[email protected]> wrote:
> Hi Vivek,
>
> On 03/12/2017 06:18 PM, Vivek Gautam wrote:
>> Hi Kishon,
>>
>>
>> On Thu, Mar 9, 2017 at 5:26 PM, Kishon Vijay Abraham I <[email protected]> wrote:
>>> Hi,
>>>
>>> On Thursday 09 March 2017 05:03 PM, Jaehoon Chung wrote:
>>>> Make the "samsung" directory and move the Samsung specific files to
>>>> there for maintaining the files relevant to Samsung.
>>>
>>> The number of phy drivers in drivers/phy is getting unmanageable. I think this
>>> is a good step to make it a little better. Can you also add a MAINTAINER for
>>> drivers/phy/samsung?
>>
>> I remember making a similar attempt in past [1], but that time we couldn't
>> reach an agreement as to whether group the phy drivers based on
>> vendors or based on the type of phy.
>>
>> If you are fine with grouping the drivers for each vendor, I hope you can
>> consider picking that patch (I can respin the patch based on linux-phy/next).
>> Other driver maintainers were also cool with that older patch.
>>
>> Let me know your comments.
>>
>> [1] https://patchwork.kernel.org/patch/8762561/
>
> I didn't know you had already sent the patches.
> My RFC patch can be dropped. I think it's good way.
It is alright. Thank you for acknowledgement on dropping your patch.
Regards
Vivek
>
> Best Regards,
> Jaehoon Chung
>
>>
>> Regards
>> Vivek
>>
>>>
>>> Thanks
>>> Kishon
>>>>
>>>> Signed-off-by: Jaehoon Chung <[email protected]>
>>>> ---
>>>> drivers/phy/Kconfig | 96 +----------------------
>>>> drivers/phy/Makefile | 14 +---
>>>> drivers/phy/samsung/Kconfig | 92 ++++++++++++++++++++++
>>>> drivers/phy/samsung/Makefile | 11 +++
>>>> drivers/phy/{ => samsung}/phy-exynos-dp-video.c | 0
>>>> drivers/phy/{ => samsung}/phy-exynos-mipi-video.c | 0
>>>> drivers/phy/{ => samsung}/phy-exynos-pcie.c | 0
>>>> drivers/phy/{ => samsung}/phy-exynos4210-usb2.c | 0
>>>> drivers/phy/{ => samsung}/phy-exynos4x12-usb2.c | 0
>>>> drivers/phy/{ => samsung}/phy-exynos5-usbdrd.c | 0
>>>> drivers/phy/{ => samsung}/phy-exynos5250-sata.c | 0
>>>> drivers/phy/{ => samsung}/phy-exynos5250-usb2.c | 0
>>>> drivers/phy/{ => samsung}/phy-s5pv210-usb2.c | 0
>>>> drivers/phy/{ => samsung}/phy-samsung-usb2.c | 0
>>>> drivers/phy/{ => samsung}/phy-samsung-usb2.h | 0
>>>> 15 files changed, 108 insertions(+), 105 deletions(-)
>>>> create mode 100644 drivers/phy/samsung/Kconfig
>>>> create mode 100644 drivers/phy/samsung/Makefile
>>>> rename drivers/phy/{ => samsung}/phy-exynos-dp-video.c (100%)
>>>> rename drivers/phy/{ => samsung}/phy-exynos-mipi-video.c (100%)
>>>> rename drivers/phy/{ => samsung}/phy-exynos-pcie.c (100%)
>>>> rename drivers/phy/{ => samsung}/phy-exynos4210-usb2.c (100%)
>>>> rename drivers/phy/{ => samsung}/phy-exynos4x12-usb2.c (100%)
>>>> rename drivers/phy/{ => samsung}/phy-exynos5-usbdrd.c (100%)
>>>> rename drivers/phy/{ => samsung}/phy-exynos5250-sata.c (100%)
>>>> rename drivers/phy/{ => samsung}/phy-exynos5250-usb2.c (100%)
>>>> rename drivers/phy/{ => samsung}/phy-s5pv210-usb2.c (100%)
>>>> rename drivers/phy/{ => samsung}/phy-samsung-usb2.c (100%)
>>>> rename drivers/phy/{ => samsung}/phy-samsung-usb2.h (100%)
>>
>> [snip]
>>
>>
>>
>
> --
> To unsubscribe from this list: send the line "unsubscribe linux-samsung-soc" in
> the body of a message to [email protected]
> More majordomo info at http://vger.kernel.org/majordomo-info.html
--
Qualcomm Innovation Center, Inc. is a member of Code Aurora Forum,
a Linux Foundation Collaborative Project
Hi Vivek,
On Monday 13 March 2017 02:27 PM, Vivek Gautam wrote:
> Hi Kishon,
>
>
> On Mon, Mar 13, 2017 at 10:51 AM, Kishon Vijay Abraham I <[email protected]> wrote:
>> Hi,
>>
>> On Sunday 12 March 2017 02:48 PM, Vivek Gautam wrote:
>>> Hi Kishon,
>>>
>>>
>>> On Thu, Mar 9, 2017 at 5:26 PM, Kishon Vijay Abraham I <[email protected]> wrote:
>>>> Hi,
>>>>
>>>> On Thursday 09 March 2017 05:03 PM, Jaehoon Chung wrote:
>>>>> Make the "samsung" directory and move the Samsung specific files to
>>>>> there for maintaining the files relevant to Samsung.
>>>>
>>>> The number of phy drivers in drivers/phy is getting unmanageable. I think this
>>>> is a good step to make it a little better. Can you also add a MAINTAINER for
>>>> drivers/phy/samsung?
>>>
>>> I remember making a similar attempt in past [1], but that time we couldn't
>>> reach an agreement as to whether group the phy drivers based on
>>> vendors or based on the type of phy.
>>>
>>> If you are fine with grouping the drivers for each vendor, I hope you can
>>> consider picking that patch (I can respin the patch based on linux-phy/next).
>>> Other driver maintainers were also cool with that older patch.
>>
>> Sure, you can re-spin the patch.
>
> Thanks, will re-spin the patch.
>
>>
>> At that point of time I didn't think grouping phy drivers for each vendor is
>> required. But especially after [1] where I failed to notice an existing phy
>> driver can be reused and later has to be reverted. This could have been easily
>> identified by MAINTAINERS of that particular platform. That's why now I feel
>> grouping phy drivers and having a MAINTAINER for every vendor directory will
>> help to identify such issues.
>
> I will be able to update the MAINTAINERS file for the directory structure
> change only, like I did in my earlier version.
> We will have to ask each vendors to pull in vendors for each directory.
That's fine. Eventually we'll get that added.
Thanks
Kishon