This patch will also work for AMD 10H. But we are skipping it as :
AMD 10H cpus reports Inaccurate Temperature Measurement:
http://www.amd.com/us-en/assets/content_type/white_papers_and_tech_docs/41322.pdf
Errata #319
Signed-off-by: Jaswinder Singh Rajput <[email protected]>
---
drivers/hwmon/k8temp.c | 31 +++++++++++++++++++++++++++++--
1 files changed, 29 insertions(+), 2 deletions(-)
diff --git a/drivers/hwmon/k8temp.c b/drivers/hwmon/k8temp.c
index 1fe9951..4459dbf 100644
--- a/drivers/hwmon/k8temp.c
+++ b/drivers/hwmon/k8temp.c
@@ -1,5 +1,6 @@
/*
* k8temp.c - Linux kernel module for hardware monitoring
+ * for AMD K8 and derivatives
*
* Copyright (C) 2006 Rudolf Marek <[email protected]>
*
@@ -33,7 +34,7 @@
#include <linux/mutex.h>
#include <asm/processor.h>
-#define TEMP_FROM_REG(val) (((((val) >> 16) & 0xff) - 49) * 1000)
+#define REG_TCTL 0xa4
#define REG_TEMP 0xe4
#define SEL_PLACE 0x40
#define SEL_CORE 0x04
@@ -52,6 +53,14 @@ struct k8temp_data {
u32 temp_offset;
};
+static unsigned long temp_from_reg(unsigned long val)
+{
+ if (boot_cpu_data.x86 > 0xf)
+ return ((val) >> 21) * 125;
+ else
+ return ((((val) >> 16) & 0xff) - 49) * 1000;
+}
+
static struct k8temp_data *k8temp_update_device(struct device *dev)
{
struct k8temp_data *data = dev_get_drvdata(dev);
@@ -62,6 +71,11 @@ static struct k8temp_data *k8temp_update_device(struct device *dev)
if (!data->valid
|| time_after(jiffies, data->last_updated + HZ)) {
+ if (boot_cpu_data.x86 > 0xf) {
+ pci_read_config_dword(pdev, REG_TCTL,
+ &data->temp[0][0]);
+ goto update_done;
+ }
pci_read_config_byte(pdev, REG_TEMP, &tmp);
tmp &= ~(SEL_PLACE | SEL_CORE); /* Select sensor 0, core0 */
pci_write_config_byte(pdev, REG_TEMP, tmp);
@@ -89,6 +103,7 @@ static struct k8temp_data *k8temp_update_device(struct device *dev)
}
}
+update_done:
data->last_updated = jiffies;
data->valid = 1;
}
@@ -123,7 +138,7 @@ static ssize_t show_temp(struct device *dev,
if (data->swap_core_select)
core = core ? 0 : 1;
- temp = TEMP_FROM_REG(data->temp[core][place]) + data->temp_offset;
+ temp = temp_from_reg(data->temp[core][place]) + data->temp_offset;
return sprintf(buf, "%d\n", temp);
}
@@ -138,6 +153,14 @@ static DEVICE_ATTR(name, S_IRUGO, show_name, NULL);
static struct pci_device_id k8temp_ids[] = {
{ PCI_DEVICE(PCI_VENDOR_ID_AMD, PCI_DEVICE_ID_AMD_K8_NB_MISC) },
+ /*
+ * AMD 10H cpus reports Inaccurate Temperature Measurement :
+ * http://www.amd.com/us-en/assets/content_type/white_papers_and_tech_docs/41322.pdf
+ * Errata #319
+ * So skipping 10H
+ { PCI_DEVICE(PCI_VENDOR_ID_AMD, PCI_DEVICE_ID_AMD_10H_NB_MISC) },
+ */
+ { PCI_DEVICE(PCI_VENDOR_ID_AMD, PCI_DEVICE_ID_AMD_11H_NB_MISC) },
{ 0 },
};
@@ -157,6 +180,9 @@ static int __devinit k8temp_probe(struct pci_dev *pdev,
goto exit;
}
+ if (boot_cpu_data.x86 > 0xf)
+ goto probe_done;
+
model = boot_cpu_data.x86_model;
stepping = boot_cpu_data.x86_mask;
@@ -226,6 +252,7 @@ static int __devinit k8temp_probe(struct pci_dev *pdev,
data->sensorsp &= ~SEL_CORE;
}
+probe_done:
data->name = "k8temp";
mutex_init(&data->update_lock);
dev_set_drvdata(&pdev->dev, data);
--
1.6.0.6
Ingo,
I need to apply and then revert this patch each and every time I fetch
-tip tree. And I need to do this many times like 20-30 times in a day.
I need this patch to monitor the temperature for AMD 11H box as it is
very hot here temp is around 47 C and my CPU temp goes high upto 87 C.
My one AMD box is already broken due to high temperature.
By using this patch I breaks building of the kernel as temperature
reaches 80 C.
I hope you understand my problem.
If possible, can you please apply this patch in tip:out-of-tree
(not-for-upstream)
Thanks,
--
JSR
On Sat, 2009-06-20 at 13:26 +0530, Jaswinder Singh Rajput wrote:
> This patch will also work for AMD 10H. But we are skipping it as :
>
> AMD 10H cpus reports Inaccurate Temperature Measurement:
> http://www.amd.com/us-en/assets/content_type/white_papers_and_tech_docs/41322.pdf
> Errata #319
>
> Signed-off-by: Jaswinder Singh Rajput <[email protected]>
> ---
> drivers/hwmon/k8temp.c | 31 +++++++++++++++++++++++++++++--
> 1 files changed, 29 insertions(+), 2 deletions(-)
>
> diff --git a/drivers/hwmon/k8temp.c b/drivers/hwmon/k8temp.c
> index 1fe9951..4459dbf 100644
> --- a/drivers/hwmon/k8temp.c
> +++ b/drivers/hwmon/k8temp.c
> @@ -1,5 +1,6 @@
> /*
> * k8temp.c - Linux kernel module for hardware monitoring
> + * for AMD K8 and derivatives
> *
> * Copyright (C) 2006 Rudolf Marek <[email protected]>
> *
> @@ -33,7 +34,7 @@
> #include <linux/mutex.h>
> #include <asm/processor.h>
>
> -#define TEMP_FROM_REG(val) (((((val) >> 16) & 0xff) - 49) * 1000)
> +#define REG_TCTL 0xa4
> #define REG_TEMP 0xe4
> #define SEL_PLACE 0x40
> #define SEL_CORE 0x04
> @@ -52,6 +53,14 @@ struct k8temp_data {
> u32 temp_offset;
> };
>
> +static unsigned long temp_from_reg(unsigned long val)
> +{
> + if (boot_cpu_data.x86 > 0xf)
> + return ((val) >> 21) * 125;
> + else
> + return ((((val) >> 16) & 0xff) - 49) * 1000;
> +}
> +
> static struct k8temp_data *k8temp_update_device(struct device *dev)
> {
> struct k8temp_data *data = dev_get_drvdata(dev);
> @@ -62,6 +71,11 @@ static struct k8temp_data *k8temp_update_device(struct device *dev)
>
> if (!data->valid
> || time_after(jiffies, data->last_updated + HZ)) {
> + if (boot_cpu_data.x86 > 0xf) {
> + pci_read_config_dword(pdev, REG_TCTL,
> + &data->temp[0][0]);
> + goto update_done;
> + }
> pci_read_config_byte(pdev, REG_TEMP, &tmp);
> tmp &= ~(SEL_PLACE | SEL_CORE); /* Select sensor 0, core0 */
> pci_write_config_byte(pdev, REG_TEMP, tmp);
> @@ -89,6 +103,7 @@ static struct k8temp_data *k8temp_update_device(struct device *dev)
> }
> }
>
> +update_done:
> data->last_updated = jiffies;
> data->valid = 1;
> }
> @@ -123,7 +138,7 @@ static ssize_t show_temp(struct device *dev,
> if (data->swap_core_select)
> core = core ? 0 : 1;
>
> - temp = TEMP_FROM_REG(data->temp[core][place]) + data->temp_offset;
> + temp = temp_from_reg(data->temp[core][place]) + data->temp_offset;
>
> return sprintf(buf, "%d\n", temp);
> }
> @@ -138,6 +153,14 @@ static DEVICE_ATTR(name, S_IRUGO, show_name, NULL);
>
> static struct pci_device_id k8temp_ids[] = {
> { PCI_DEVICE(PCI_VENDOR_ID_AMD, PCI_DEVICE_ID_AMD_K8_NB_MISC) },
> + /*
> + * AMD 10H cpus reports Inaccurate Temperature Measurement :
> + * http://www.amd.com/us-en/assets/content_type/white_papers_and_tech_docs/41322.pdf
> + * Errata #319
> + * So skipping 10H
> + { PCI_DEVICE(PCI_VENDOR_ID_AMD, PCI_DEVICE_ID_AMD_10H_NB_MISC) },
> + */
> + { PCI_DEVICE(PCI_VENDOR_ID_AMD, PCI_DEVICE_ID_AMD_11H_NB_MISC) },
> { 0 },
> };
>
> @@ -157,6 +180,9 @@ static int __devinit k8temp_probe(struct pci_dev *pdev,
> goto exit;
> }
>
> + if (boot_cpu_data.x86 > 0xf)
> + goto probe_done;
> +
> model = boot_cpu_data.x86_model;
> stepping = boot_cpu_data.x86_mask;
>
> @@ -226,6 +252,7 @@ static int __devinit k8temp_probe(struct pci_dev *pdev,
> data->sensorsp &= ~SEL_CORE;
> }
>
> +probe_done:
> data->name = "k8temp";
> mutex_init(&data->update_lock);
> dev_set_drvdata(&pdev->dev, data);
Hello Ingo,
Now I do not use -tip tree, if you want you can remove this patch from
-tip (commit 318e6a08d340d85)
Thanks for your help and support.
--
JSR
On Thu, 2009-06-25 at 19:39 +0530, Jaswinder Singh Rajput wrote:
> Ingo,
>
> I need to apply and then revert this patch each and every time I fetch
> -tip tree. And I need to do this many times like 20-30 times in a day.
>
> I need this patch to monitor the temperature for AMD 11H box as it is
> very hot here temp is around 47 C and my CPU temp goes high upto 87 C.
> My one AMD box is already broken due to high temperature.
>
> By using this patch I breaks building of the kernel as temperature
> reaches 80 C.
>
> I hope you understand my problem.
>
> If possible, can you please apply this patch in tip:out-of-tree
> (not-for-upstream)
>
> Thanks,
> --
> JSR
>
> On Sat, 2009-06-20 at 13:26 +0530, Jaswinder Singh Rajput wrote:
> > This patch will also work for AMD 10H. But we are skipping it as :
> >
> > AMD 10H cpus reports Inaccurate Temperature Measurement:
> > http://www.amd.com/us-en/assets/content_type/white_papers_and_tech_docs/41322.pdf
> > Errata #319
> >
> > Signed-off-by: Jaswinder Singh Rajput <[email protected]>
> > ---
> > drivers/hwmon/k8temp.c | 31 +++++++++++++++++++++++++++++--
> > 1 files changed, 29 insertions(+), 2 deletions(-)
> >
> > diff --git a/drivers/hwmon/k8temp.c b/drivers/hwmon/k8temp.c
> > index 1fe9951..4459dbf 100644
> > --- a/drivers/hwmon/k8temp.c
> > +++ b/drivers/hwmon/k8temp.c
> > @@ -1,5 +1,6 @@
> > /*
> > * k8temp.c - Linux kernel module for hardware monitoring
> > + * for AMD K8 and derivatives
> > *
> > * Copyright (C) 2006 Rudolf Marek <[email protected]>
> > *
> > @@ -33,7 +34,7 @@
> > #include <linux/mutex.h>
> > #include <asm/processor.h>
> >
> > -#define TEMP_FROM_REG(val) (((((val) >> 16) & 0xff) - 49) * 1000)
> > +#define REG_TCTL 0xa4
> > #define REG_TEMP 0xe4
> > #define SEL_PLACE 0x40
> > #define SEL_CORE 0x04
> > @@ -52,6 +53,14 @@ struct k8temp_data {
> > u32 temp_offset;
> > };
> >
> > +static unsigned long temp_from_reg(unsigned long val)
> > +{
> > + if (boot_cpu_data.x86 > 0xf)
> > + return ((val) >> 21) * 125;
> > + else
> > + return ((((val) >> 16) & 0xff) - 49) * 1000;
> > +}
> > +
> > static struct k8temp_data *k8temp_update_device(struct device *dev)
> > {
> > struct k8temp_data *data = dev_get_drvdata(dev);
> > @@ -62,6 +71,11 @@ static struct k8temp_data *k8temp_update_device(struct device *dev)
> >
> > if (!data->valid
> > || time_after(jiffies, data->last_updated + HZ)) {
> > + if (boot_cpu_data.x86 > 0xf) {
> > + pci_read_config_dword(pdev, REG_TCTL,
> > + &data->temp[0][0]);
> > + goto update_done;
> > + }
> > pci_read_config_byte(pdev, REG_TEMP, &tmp);
> > tmp &= ~(SEL_PLACE | SEL_CORE); /* Select sensor 0, core0 */
> > pci_write_config_byte(pdev, REG_TEMP, tmp);
> > @@ -89,6 +103,7 @@ static struct k8temp_data *k8temp_update_device(struct device *dev)
> > }
> > }
> >
> > +update_done:
> > data->last_updated = jiffies;
> > data->valid = 1;
> > }
> > @@ -123,7 +138,7 @@ static ssize_t show_temp(struct device *dev,
> > if (data->swap_core_select)
> > core = core ? 0 : 1;
> >
> > - temp = TEMP_FROM_REG(data->temp[core][place]) + data->temp_offset;
> > + temp = temp_from_reg(data->temp[core][place]) + data->temp_offset;
> >
> > return sprintf(buf, "%d\n", temp);
> > }
> > @@ -138,6 +153,14 @@ static DEVICE_ATTR(name, S_IRUGO, show_name, NULL);
> >
> > static struct pci_device_id k8temp_ids[] = {
> > { PCI_DEVICE(PCI_VENDOR_ID_AMD, PCI_DEVICE_ID_AMD_K8_NB_MISC) },
> > + /*
> > + * AMD 10H cpus reports Inaccurate Temperature Measurement :
> > + * http://www.amd.com/us-en/assets/content_type/white_papers_and_tech_docs/41322.pdf
> > + * Errata #319
> > + * So skipping 10H
> > + { PCI_DEVICE(PCI_VENDOR_ID_AMD, PCI_DEVICE_ID_AMD_10H_NB_MISC) },
> > + */
> > + { PCI_DEVICE(PCI_VENDOR_ID_AMD, PCI_DEVICE_ID_AMD_11H_NB_MISC) },
> > { 0 },
> > };
> >
> > @@ -157,6 +180,9 @@ static int __devinit k8temp_probe(struct pci_dev *pdev,
> > goto exit;
> > }
> >
> > + if (boot_cpu_data.x86 > 0xf)
> > + goto probe_done;
> > +
> > model = boot_cpu_data.x86_model;
> > stepping = boot_cpu_data.x86_mask;
> >
> > @@ -226,6 +252,7 @@ static int __devinit k8temp_probe(struct pci_dev *pdev,
> > data->sensorsp &= ~SEL_CORE;
> > }
> >
> > +probe_done:
> > data->name = "k8temp";
> > mutex_init(&data->update_lock);
> > dev_set_drvdata(&pdev->dev, data);