Add IndustryPack bus support for the Linux Kernel.
This is a virtual bus that allows to perform all the operations between
carrier and mezzanine boards.
Signed-off-by: Samuel Iglesias Gonsalvez <[email protected]>
---
drivers/staging/Kconfig | 2 +
drivers/staging/Makefile | 1 +
drivers/staging/ipack/Kconfig | 10 +++
drivers/staging/ipack/Makefile | 4 +
drivers/staging/ipack/TODO | 21 +++++
drivers/staging/ipack/ipack.c | 170 ++++++++++++++++++++++++++++++++++++
drivers/staging/ipack/ipack.h | 188 ++++++++++++++++++++++++++++++++++++++++
7 files changed, 396 insertions(+)
create mode 100644 drivers/staging/ipack/Kconfig
create mode 100644 drivers/staging/ipack/Makefile
create mode 100644 drivers/staging/ipack/TODO
create mode 100644 drivers/staging/ipack/ipack.c
create mode 100644 drivers/staging/ipack/ipack.h
diff --git a/drivers/staging/Kconfig b/drivers/staging/Kconfig
index 97d412d..b410a36 100644
--- a/drivers/staging/Kconfig
+++ b/drivers/staging/Kconfig
@@ -24,6 +24,8 @@ menuconfig STAGING
if STAGING
+source "drivers/staging/ipack/Kconfig"
+
source "drivers/staging/serial/Kconfig"
source "drivers/staging/et131x/Kconfig"
diff --git a/drivers/staging/Makefile b/drivers/staging/Makefile
index ffe7d44..23eb56b 100644
--- a/drivers/staging/Makefile
+++ b/drivers/staging/Makefile
@@ -30,6 +30,7 @@ obj-$(CONFIG_OCTEON_ETHERNET) += octeon/
obj-$(CONFIG_VT6655) += vt6655/
obj-$(CONFIG_VT6656) += vt6656/
obj-$(CONFIG_VME_BUS) += vme/
+obj-$(CONFIG_IPACK_BUS) += ipack/
obj-$(CONFIG_DX_SEP) += sep/
obj-$(CONFIG_IIO) += iio/
obj-$(CONFIG_ZRAM) += zram/
diff --git a/drivers/staging/ipack/Kconfig b/drivers/staging/ipack/Kconfig
new file mode 100644
index 0000000..c036b79
--- /dev/null
+++ b/drivers/staging/ipack/Kconfig
@@ -0,0 +1,10 @@
+#
+# IPACK configuration.
+#
+
+menuconfig IPACK_BUS
+ tristate "IndustryPack bus support"
+ depends on PCI
+ ---help---
+ If you say Y here you get support for the IndustryPack Framework.
+
diff --git a/drivers/staging/ipack/Makefile b/drivers/staging/ipack/Makefile
new file mode 100644
index 0000000..56e2340
--- /dev/null
+++ b/drivers/staging/ipack/Makefile
@@ -0,0 +1,4 @@
+#
+# Makefile for the IPACK bridge device drivers.
+#
+obj-$(CONFIG_IPACK_BUS) += ipack.o
diff --git a/drivers/staging/ipack/TODO b/drivers/staging/ipack/TODO
new file mode 100644
index 0000000..167ae4d
--- /dev/null
+++ b/drivers/staging/ipack/TODO
@@ -0,0 +1,21 @@
+ TODO
+ ====
+Introduction
+============
+
+These drivers add support for IndustryPack devices: carrier and mezzanine
+boards.
+
+The ipack driver is just an abstraction of the bus providing the common
+operations between the two kind of boards.
+
+TODO
+====
+
+Ipack
+-----
+
+* The structures and API exported can be improved a lot. For example, the
+ way to unregistering mezzanine devices, doing the mezzanine driver a call to
+ remove_device() to notify the carrier driver, or the opposite with the call to
+ the ipack_driver_ops' remove() function could be improved.
diff --git a/drivers/staging/ipack/ipack.c b/drivers/staging/ipack/ipack.c
new file mode 100644
index 0000000..ba84755
--- /dev/null
+++ b/drivers/staging/ipack/ipack.c
@@ -0,0 +1,170 @@
+/*
+ * Industry-pack bus support functions.
+ *
+ * (C) 2011 Samuel Iglesias Gonsalvez <[email protected]>, CERN
+ * (C) 2012 Samuel Iglesias Gonsalvez <[email protected]>, Igalia
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the Free
+ * Software Foundation; either version 2 of the License, or (at your option)
+ * any later version.
+ */
+
+#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
+
+#include <linux/module.h>
+#include <linux/mutex.h>
+#include "ipack.h"
+
+/* used when allocating bus numbers */
+#define IPACK_MAXBUS 64
+
+DEFINE_MUTEX(ipack_mutex);
+
+struct ipack_busmap {
+ unsigned long busmap[IPACK_MAXBUS / (8*sizeof(unsigned long))];
+};
+static struct ipack_busmap busmap;
+
+static int ipack_bus_match(struct device *device, struct device_driver *driver)
+{
+ int ret;
+ struct ipack_device *dev = to_ipack_dev(device);
+ struct ipack_driver *drv = to_ipack_driver(driver);
+
+ if (!drv->ops->match)
+ return -EINVAL;
+
+ ret = drv->ops->match(dev);
+ if (ret)
+ dev->driver = drv;
+
+ return 0;
+}
+
+static int ipack_bus_probe(struct device *device)
+{
+ struct ipack_device *dev = to_ipack_dev(device);
+
+ if (!dev->driver->ops->probe)
+ return -EINVAL;
+
+ return dev->driver->ops->probe(dev);
+}
+
+static int ipack_bus_remove(struct device *device)
+{
+ struct ipack_device *dev = to_ipack_dev(device);
+
+ if (!dev->driver->ops->remove)
+ return -EINVAL;
+
+ dev->driver->ops->remove(dev);
+ return 0;
+}
+
+struct bus_type ipack_bus_type = {
+ .name = "ipack",
+ .probe = ipack_bus_probe,
+ .match = ipack_bus_match,
+ .remove = ipack_bus_remove,
+};
+
+static int ipack_assign_bus_number(void)
+{
+ int busnum;
+
+ mutex_lock(&ipack_mutex);
+ busnum = find_next_zero_bit(busmap.busmap, IPACK_MAXBUS, 1);
+
+ if (busnum >= IPACK_MAXBUS) {
+ pr_err("too many buses\n");
+ busnum = -1;
+ goto error_find_busnum;
+ }
+
+ set_bit(busnum, busmap.busmap);
+error_find_busnum:
+ mutex_unlock(&ipack_mutex);
+ return busnum;
+}
+
+int ipack_bus_register(struct ipack_bus_device *bus)
+{
+ int bus_nr;
+
+ bus_nr = ipack_assign_bus_number();
+ if (bus_nr < 0)
+ return -1;
+
+ bus->bus_nr = bus_nr;
+ return 0;
+}
+EXPORT_SYMBOL_GPL(ipack_bus_register);
+
+int ipack_bus_unregister(struct ipack_bus_device *bus)
+{
+ mutex_lock(&ipack_mutex);
+ clear_bit(bus->bus_nr, busmap.busmap);
+ mutex_unlock(&ipack_mutex);
+ return 0;
+}
+EXPORT_SYMBOL_GPL(ipack_bus_unregister);
+
+int ipack_driver_register(struct ipack_driver *edrv)
+{
+ edrv->driver.bus = &ipack_bus_type;
+ return driver_register(&edrv->driver);
+}
+EXPORT_SYMBOL_GPL(ipack_driver_register);
+
+void ipack_driver_unregister(struct ipack_driver *edrv)
+{
+ driver_unregister(&edrv->driver);
+}
+EXPORT_SYMBOL_GPL(ipack_driver_unregister);
+
+void ipack_device_release(struct device *dev)
+{
+}
+
+int ipack_device_register(struct ipack_device *dev)
+{
+ int ret;
+
+ dev->dev.bus = &ipack_bus_type;
+ dev->dev.release = ipack_device_release;
+ dev_set_name(&dev->dev, "%s.%u.%u", dev->board_name, dev->bus_nr, dev->slot);
+
+ ret = device_register(&dev->dev);
+ if (ret < 0) {
+ pr_err("error registering the device.\n");
+ dev->driver->ops->remove(dev);
+ }
+
+ return ret;
+}
+EXPORT_SYMBOL_GPL(ipack_device_register);
+
+void ipack_device_unregister(struct ipack_device *dev)
+{
+ device_unregister(&dev->dev);
+}
+EXPORT_SYMBOL_GPL(ipack_device_unregister);
+
+static int __init ipack_init(void)
+{
+ return bus_register(&ipack_bus_type);
+}
+
+static void __exit ipack_exit(void)
+{
+ bus_unregister(&ipack_bus_type);
+}
+
+module_init(ipack_init);
+module_exit(ipack_exit);
+
+MODULE_AUTHOR("Samuel Iglesias Gonsalvez <[email protected]>");
+MODULE_LICENSE("GPL");
+MODULE_DESCRIPTION("Industry-pack bus core");
diff --git a/drivers/staging/ipack/ipack.h b/drivers/staging/ipack/ipack.h
new file mode 100644
index 0000000..690661a
--- /dev/null
+++ b/drivers/staging/ipack/ipack.h
@@ -0,0 +1,188 @@
+/*
+ * Industry-pack bus.
+ *
+ * (C) 2011 Samuel Iglesias Gonsalvez <[email protected]>, CERN
+ * (C) 2012 Samuel Iglesias Gonsalvez <[email protected]>, Igalia
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the Free
+ * Software Foundation; either version 2 of the License, or (at your option)
+ * any later version.
+ */
+
+#include <linux/device.h>
+
+#define IPACK_BOARD_NAME_SIZE 16
+#define IPACK_IRQ_NAME_SIZE 50
+#define IPACK_IDPROM_OFFSET_I 0x01
+#define IPACK_IDPROM_OFFSET_P 0x03
+#define IPACK_IDPROM_OFFSET_A 0x05
+#define IPACK_IDPROM_OFFSET_C 0x07
+#define IPACK_IDPROM_OFFSET_MANUFACTURER_ID 0x09
+#define IPACK_IDPROM_OFFSET_MODEL 0x0B
+#define IPACK_IDPROM_OFFSET_REVISION 0x0D
+#define IPACK_IDPROM_OFFSET_RESERVED 0x0F
+#define IPACK_IDPROM_OFFSET_DRIVER_ID_L 0x11
+#define IPACK_IDPROM_OFFSET_DRIVER_ID_H 0x13
+#define IPACK_IDPROM_OFFSET_NUM_BYTES 0x15
+#define IPACK_IDPROM_OFFSET_CRC 0x17
+
+struct ipack_bus_ops;
+struct ipack_driver;
+
+enum ipack_space {
+ IPACK_IO_SPACE = 0,
+ IPACK_ID_SPACE = 1,
+ IPACK_MEM_SPACE = 2,
+};
+
+/**
+ * struct ipack_addr_space - Virtual address space mapped for a specified type.
+ *
+ * @address: virtual address
+ * @size: size of the mapped space
+ */
+struct ipack_addr_space {
+ void *address;
+ unsigned int size;
+};
+
+/**
+ * struct ipack_device
+ *
+ * @board_name: IP mezzanine board name
+ * @bus_name: IP carrier board name
+ * @bus_nr: IP bus number where the device is plugged
+ * @slot: Slot where the device is plugged in the carrier board
+ * @irq: IRQ vector
+ * @driver: Pointer to the ipack_driver that manages the device
+ * @ops: Carrier board operations to access the device
+ * @id_space: Virtual address to ID space.
+ * @io_space: Virtual address to IO space.
+ * @mem_space: Virtual address to MEM space.
+ * @dev: device in kernel representation.
+ *
+ * Warning: Direct access to mapped memory is possible but the endianness
+ * is not the same with PCI carrier or VME carrier. The endianness is managed
+ * by the carrier board throught @ops.
+ */
+struct ipack_device {
+ char board_name[IPACK_BOARD_NAME_SIZE];
+ char bus_name[IPACK_BOARD_NAME_SIZE];
+ unsigned int bus_nr;
+ unsigned int slot;
+ unsigned int irq;
+ struct ipack_driver *driver;
+ struct ipack_bus_ops *ops;
+ struct ipack_addr_space id_space;
+ struct ipack_addr_space io_space;
+ struct ipack_addr_space mem_space;
+ struct device dev;
+};
+
+#define to_ipack_dev(device) container_of(device, struct ipack_device, dev)
+
+/*
+ * struct ipack_driver_ops -- callbacks to mezzanine driver for installing/removing one device
+ *
+ * @match: Match function
+ * @probe: Probe function
+ * @remove: tell the driver that the carrier board wants to remove one device
+ */
+
+struct ipack_driver_ops {
+ int (*match) (struct ipack_device *dev);
+ int (*probe) (struct ipack_device *dev);
+ void (*remove) (struct ipack_device *dev);
+};
+
+/**
+ * struct ipack_driver -- Specific data to each mezzanine board driver
+ *
+ * @driver: Device driver kernel representation
+ * @ops: Mezzanine driver operations specific for the ipack bus.
+ */
+struct ipack_driver {
+ struct module *owner;
+ struct device_driver driver;
+ struct ipack_driver_ops *ops;
+};
+
+
+#define to_ipack_driver(drv) container_of(drv, struct ipack_driver, driver)
+
+/*
+ * ipack_driver_register -- Register a new mezzanine driver
+ *
+ * Called by the mezzanine driver to register itself as a driver
+ * that can manage ipack devices.
+ */
+
+int ipack_driver_register(struct ipack_driver *edrv);
+void ipack_driver_unregister(struct ipack_driver *edrv);
+
+/*
+ * ipack_device_register -- register a new mezzanine device
+ *
+ * Register a new ipack device (mezzanine device). The call is done by
+ * the carrier device driver.
+ */
+int ipack_device_register(struct ipack_device *dev);
+void ipack_device_unregister(struct ipack_device *dev);
+
+/**
+ * struct ipack_bus_ops - available operations on a bridge module
+ *
+ * @map_space: map IP address space
+ * @unmap_space: unmap IP address space
+ * @request_irq: request IRQ
+ * @free_irq: free IRQ
+ * @read8: read unsigned char
+ * @read16: read unsigned short
+ * @read32: read unsigned int
+ * @write8: read unsigned char
+ * @write16: read unsigned short
+ * @write32: read unsigned int
+ * @remove_device: tell the bridge module that the device has been removed
+ */
+struct ipack_bus_ops {
+ int (*map_space) (struct ipack_device *dev, unsigned int memory_size, int space);
+ int (*unmap_space) (struct ipack_device *dev, int space);
+ int (*request_irq) (struct ipack_device *dev, int vector, int (*handler)(void *), void *arg);
+ int (*free_irq) (struct ipack_device *dev);
+ int (*read8) (struct ipack_device *dev, int space, unsigned long offset, unsigned char *value);
+ int (*read16) (struct ipack_device *dev, int space, unsigned long offset, unsigned short *value);
+ int (*read32) (struct ipack_device *dev, int space, unsigned long offset, unsigned int *value);
+ int (*write8) (struct ipack_device *dev, int space, unsigned long offset, unsigned char value);
+ int (*write16) (struct ipack_device *dev, int space, unsigned long offset, unsigned short value);
+ int (*write32) (struct ipack_device *dev, int space, unsigned long offset, unsigned int value);
+ int (*remove_device) (struct ipack_device *dev);
+};
+
+/**
+ * struct ipack_bus_device
+ *
+ * @dev: pointer to carrier device
+ * @slots: number of slots available
+ * @bus_nr: ipack bus number
+ * @vector: IRQ base vector. IRQ vectors are $vector + $slot_number
+ */
+struct ipack_bus_device {
+ struct device *dev;
+ int slots;
+ int bus_nr;
+ int vector;
+};
+
+/**
+ * ipack_bus_register -- register a new ipack bus
+ *
+ * The carrier board device driver should call this function to register itself
+ * as available bus in ipack.
+ */
+int ipack_bus_register(struct ipack_bus_device *bus);
+
+/**
+ * ipack_bus_unregister -- unregister an ipack bus
+ */
+int ipack_bus_unregister(struct ipack_bus_device *bus);
--
1.7.10
Driver for the carrier board TEWS TPCI-200, a bridge between PCIe bus and
IndustryPack bus.
Signed-off-by: Samuel Iglesias Gonsalvez <[email protected]>
---
drivers/staging/ipack/Kconfig | 5 +
drivers/staging/ipack/Makefile | 1 +
drivers/staging/ipack/TODO | 10 +
drivers/staging/ipack/bridges/Kconfig | 7 +
drivers/staging/ipack/bridges/Makefile | 1 +
drivers/staging/ipack/bridges/tpci200.c | 1176 +++++++++++++++++++++++++++++++
drivers/staging/ipack/bridges/tpci200.h | 165 +++++
7 files changed, 1365 insertions(+)
create mode 100644 drivers/staging/ipack/bridges/Kconfig
create mode 100644 drivers/staging/ipack/bridges/Makefile
create mode 100644 drivers/staging/ipack/bridges/tpci200.c
create mode 100644 drivers/staging/ipack/bridges/tpci200.h
diff --git a/drivers/staging/ipack/Kconfig b/drivers/staging/ipack/Kconfig
index c036b79..a3f5925 100644
--- a/drivers/staging/ipack/Kconfig
+++ b/drivers/staging/ipack/Kconfig
@@ -8,3 +8,8 @@ menuconfig IPACK_BUS
---help---
If you say Y here you get support for the IndustryPack Framework.
+if IPACK_BUS
+
+source "drivers/staging/ipack/bridges/Kconfig"
+
+endif # IPACK
diff --git a/drivers/staging/ipack/Makefile b/drivers/staging/ipack/Makefile
index 56e2340..59b8762 100644
--- a/drivers/staging/ipack/Makefile
+++ b/drivers/staging/ipack/Makefile
@@ -2,3 +2,4 @@
# Makefile for the IPACK bridge device drivers.
#
obj-$(CONFIG_IPACK_BUS) += ipack.o
+obj-y += bridges/
diff --git a/drivers/staging/ipack/TODO b/drivers/staging/ipack/TODO
index 167ae4d..d5a5735 100644
--- a/drivers/staging/ipack/TODO
+++ b/drivers/staging/ipack/TODO
@@ -12,6 +12,16 @@ operations between the two kind of boards.
TODO
====
+TPCI-200
+--------
+
+* It receives the name of the mezzanine plugged in each slot by SYSFS.
+ No autodetection supported yet, because the mezzanine driver could not be
+ loaded at the time that the tpci200 driver loads.
+
+* It has a linked list with the tpci200 devices it is managing. Get rid of it
+ and use driver_for_each_device() instead.
+
Ipack
-----
diff --git a/drivers/staging/ipack/bridges/Kconfig b/drivers/staging/ipack/bridges/Kconfig
new file mode 100644
index 0000000..554302f
--- /dev/null
+++ b/drivers/staging/ipack/bridges/Kconfig
@@ -0,0 +1,7 @@
+config BOARD_TPCI200
+ bool "TEWS TPCI-200 support for IndustryPack bus"
+ depends on IPACK_BUS
+ help
+ This driver supports the TEWS TPCI200 device for the IndustryPack bus.
+ default n
+
diff --git a/drivers/staging/ipack/bridges/Makefile b/drivers/staging/ipack/bridges/Makefile
new file mode 100644
index 0000000..d8b7645
--- /dev/null
+++ b/drivers/staging/ipack/bridges/Makefile
@@ -0,0 +1 @@
+obj-$(CONFIG_BOARD_TPCI200) += tpci200.o
diff --git a/drivers/staging/ipack/bridges/tpci200.c b/drivers/staging/ipack/bridges/tpci200.c
new file mode 100644
index 0000000..dfa376f
--- /dev/null
+++ b/drivers/staging/ipack/bridges/tpci200.c
@@ -0,0 +1,1176 @@
+/**
+ * tpci200.c
+ *
+ * driver for the TEWS TPCI-200 device
+ * Copyright (c) 2009 Nicolas Serafini, EIC2 SA
+ * Copyright (c) 2010,2011 Samuel Iglesias Gonsalvez <[email protected]>, CERN
+ * Copyright (c) 2012 Samuel Iglesias Gonsalvez <[email protected]>, Igalia
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the Free
+ * Software Foundation; either version 2 of the License, or (at your option)
+ * any later version.
+ */
+
+#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
+
+#include <linux/module.h>
+#include "tpci200.h"
+
+struct ipack_bus_ops tpci200_bus_ops;
+
+/* TPCI200 controls registers */
+static int control_reg[] = {
+ TPCI200_CONTROL_A_REG,
+ TPCI200_CONTROL_B_REG,
+ TPCI200_CONTROL_C_REG,
+ TPCI200_CONTROL_D_REG
+};
+
+/* Linked list to save the registered devices */
+static LIST_HEAD(tpci200_list);
+
+static int tpci200_slot_unregister(struct ipack_device *dev);
+
+static struct tpci200_board *check_slot(struct ipack_device *dev)
+{
+ struct tpci200_board *tpci200;
+ int found = 0;
+
+ if (dev == NULL) {
+ pr_info("Slot doesn't exist.\n");
+ return NULL;
+ }
+
+ list_for_each_entry(tpci200, &tpci200_list, list) {
+ if (tpci200->number == dev->bus_nr) {
+ found = 1;
+ break;
+ }
+ }
+
+ if (!found) {
+ pr_err("Carrier not found\n");
+ return NULL;
+ }
+
+ if (dev->slot >= TPCI200_NB_SLOT) {
+ pr_info("Slot [%s %d:%d] doesn't exist! Last tpci200 slot is %d.\n",
+ TPCI200_SHORTNAME,
+ dev->bus_nr, dev->slot,
+ TPCI200_NB_SLOT-1);
+ return NULL;
+ }
+
+ BUG_ON(tpci200->slots == NULL);
+ if (tpci200->slots[dev->slot].dev == NULL) {
+ pr_info("Slot [%s %d:%d] is not registered !\n",
+ TPCI200_SHORTNAME,
+ dev->bus_nr, dev->slot);
+ return NULL;
+ }
+
+ return tpci200;
+}
+
+static unsigned char __tpci200_read8(void *address, unsigned long offset)
+{
+ return ioread8(address + (offset^1));
+}
+
+static unsigned short __tpci200_read16(void *address, unsigned long offset)
+{
+ return ioread16(address + offset);
+}
+
+static unsigned int __tpci200_read32(void *address, unsigned long offset)
+{
+
+ return swahw32(ioread32(address + offset));
+}
+
+static void __tpci200_write8(unsigned char value, void *address, unsigned long offset)
+{
+ iowrite8(value, address+(offset^1));
+}
+
+static void __tpci200_write16(unsigned short value, void *address, unsigned long offset)
+{
+ iowrite16(value, address+offset);
+}
+
+static void __tpci200_write32(unsigned int value, void *address, unsigned long offset)
+{
+ iowrite32(swahw32(value), address+offset);
+}
+
+struct ipack_addr_space *get_slot_address_space(struct ipack_device *dev, int space)
+{
+ struct ipack_addr_space *addr;
+
+ switch (space) {
+ case IPACK_IO_SPACE:
+ addr = &dev->io_space;
+ break;
+ case IPACK_ID_SPACE:
+ addr = &dev->id_space;
+ break;
+ case IPACK_MEM_SPACE:
+ addr = &dev->mem_space;
+ break;
+ default:
+ pr_err("Slot [%s %d:%d] space number %d doesn't exist !\n",
+ TPCI200_SHORTNAME,
+ dev->bus_nr, dev->slot, space);
+ return NULL;
+ break;
+ }
+
+ if ((addr->size == 0) || (addr->address == NULL)) {
+ pr_err("Error, slot space not mapped !\n");
+ return NULL;
+ }
+
+ return addr;
+}
+
+/**
+ * tpci200_read8 - Read an unsigned char value on space with offset.
+ *
+ * @value Read value
+ * @dev Slot to read
+ * @space Space of the slot to read
+ * @offset Offset
+ *
+ */
+int tpci200_read8(struct ipack_device *dev, int space, unsigned long offset, unsigned char *value)
+{
+ struct ipack_addr_space *addr;
+ struct tpci200_board *tpci200;
+
+ tpci200 = check_slot(dev);
+ if (tpci200 == NULL)
+ return -EINVAL;
+
+ addr = get_slot_address_space(dev, space);
+ if (addr == NULL)
+ return -EINVAL;
+
+ if (offset >= addr->size) {
+ pr_err("Error, slot space offset error !\n");
+ return -EFAULT;
+ }
+
+ *value = __tpci200_read8(addr->address, offset);
+
+ return 0;
+}
+
+int tpci200_read16(struct ipack_device *dev, int space, unsigned long offset, unsigned short *value)
+{
+ struct ipack_addr_space *addr;
+ struct tpci200_board *tpci200;
+
+ tpci200 = check_slot(dev);
+ if (tpci200 == NULL)
+ return -EINVAL;
+
+ addr = get_slot_address_space(dev, space);
+ if (addr == NULL)
+ return -EINVAL;
+
+ if ((offset+2) >= addr->size) {
+ pr_err("Error, slot space offset error !\n");
+ return -EFAULT;
+ }
+ *value = __tpci200_read16(addr->address, offset);
+
+ return 0;
+}
+
+int tpci200_read32(struct ipack_device *dev, int space, unsigned long offset, unsigned int *value)
+{
+ struct ipack_addr_space *addr;
+ struct tpci200_board *tpci200;
+
+ tpci200 = check_slot(dev);
+ if (tpci200 == NULL)
+ return -EINVAL;
+
+ addr = get_slot_address_space(dev, space);
+ if (addr == NULL)
+ return -EINVAL;
+
+ if ((offset+4) >= addr->size) {
+ pr_err("Error, slot space offset error !\n");
+ return -EFAULT;
+ }
+
+ *value = __tpci200_read32(addr->address, offset);
+
+ return 0;
+}
+
+int tpci200_write8(struct ipack_device *dev, int space, unsigned long offset, unsigned char value)
+{
+ struct ipack_addr_space *addr;
+ struct tpci200_board *tpci200;
+
+ tpci200 = check_slot(dev);
+ if (tpci200 == NULL)
+ return -EINVAL;
+
+ addr = get_slot_address_space(dev, space);
+ if (addr == NULL)
+ return -EINVAL;
+
+ if (offset >= addr->size) {
+ pr_err("Error, slot space offset error !\n");
+ return -EFAULT;
+ }
+
+ __tpci200_write8(value, addr->address, offset);
+
+ return 0;
+}
+
+int tpci200_write16(struct ipack_device *dev, int space, unsigned long offset, unsigned short value)
+{
+ struct ipack_addr_space *addr;
+ struct tpci200_board *tpci200;
+
+ tpci200 = check_slot(dev);
+ if (tpci200 == NULL)
+ return -EINVAL;
+
+ addr = get_slot_address_space(dev, space);
+ if (addr == NULL)
+ return -EINVAL;
+
+ if ((offset+2) >= addr->size) {
+ pr_err("Error, slot space offset error !\n");
+ return -EFAULT;
+ }
+
+ __tpci200_write16(value, addr->address, offset);
+
+ return 0;
+}
+
+int tpci200_write32(struct ipack_device *dev, int space, unsigned long offset, unsigned int value)
+{
+ struct ipack_addr_space *addr;
+ struct tpci200_board *tpci200;
+
+ tpci200 = check_slot(dev);
+ if (tpci200 == NULL)
+ return -EINVAL;
+
+ addr = get_slot_address_space(dev, space);
+ if (addr == NULL)
+ return -EINVAL;
+
+ if ((offset+4) >= addr->size) {
+ pr_err("Error, slot space offset error !\n");
+ return -EFAULT;
+ }
+
+ __tpci200_write32(value, addr->address, offset);
+
+ return 0;
+}
+
+void tpci200_unregister(struct tpci200_board *tpci200)
+{
+ int i;
+
+ free_irq(tpci200->info->pdev->irq, (void *) tpci200);
+
+ pci_iounmap(tpci200->info->pdev, tpci200->info->interface_regs);
+ pci_iounmap(tpci200->info->pdev, tpci200->info->ioidint_space);
+ pci_iounmap(tpci200->info->pdev, tpci200->info->mem8_space);
+
+ pci_release_region(tpci200->info->pdev, TPCI200_IP_INTERFACE_BAR);
+ pci_release_region(tpci200->info->pdev, TPCI200_IO_ID_INT_SPACES_BAR);
+ pci_release_region(tpci200->info->pdev, TPCI200_MEM8_SPACE_BAR);
+
+ pci_disable_device(tpci200->info->pdev);
+ pci_dev_put(tpci200->info->pdev);
+
+ kfree(tpci200->info);
+
+ for (i = 0; i < TPCI200_NB_SLOT; i++) {
+ tpci200->slots[i].io_phys.address = NULL;
+ tpci200->slots[i].io_phys.size = 0;
+ tpci200->slots[i].id_phys.address = NULL;
+ tpci200->slots[i].id_phys.size = 0;
+ tpci200->slots[i].mem_phys.address = NULL;
+ tpci200->slots[i].mem_phys.size = 0;
+ }
+}
+
+static irqreturn_t tpci200_interrupt(int irq, void *dev_id)
+{
+ struct tpci200_board *tpci200 = (struct tpci200_board *) dev_id;
+ int i;
+ unsigned long flags;
+ unsigned short status_reg, reg_value;
+ unsigned short unhandled_ints = 0;
+ irqreturn_t ret = IRQ_NONE;
+
+ spin_lock_irqsave(&tpci200->info->access_lock, flags);
+
+ /* Read status register */
+ status_reg = readw((unsigned short *)
+ (tpci200->info->interface_regs + TPCI200_STATUS_REG));
+
+ if (status_reg & TPCI200_SLOT_INT_MASK) {
+ unhandled_ints = status_reg & TPCI200_SLOT_INT_MASK;
+ /* callback to the IRQ handler for the corresponding slot */
+ for (i = 0; i < TPCI200_NB_SLOT; i++) {
+ if ((tpci200->slots[i].irq != NULL) &&
+ (status_reg & ((TPCI200_A_INT0 | TPCI200_A_INT1) << (2*i)))) {
+
+ ret = tpci200->slots[i].irq->handler(tpci200->slots[i].irq->arg);
+
+ /* Dummy reads */
+ readw((unsigned short *)(tpci200->slots[i].dev->io_space.address + 0xC0));
+ readw((unsigned short *)(tpci200->slots[i].dev->io_space.address + 0xC2));
+
+ unhandled_ints &= ~(((TPCI200_A_INT0 | TPCI200_A_INT1) << (2*i)));
+ }
+ }
+ }
+ /* Interrupt not handled are disabled */
+ if (unhandled_ints) {
+ for (i = 0; i < TPCI200_NB_SLOT; i++) {
+ if (unhandled_ints & ((TPCI200_INT0_EN | TPCI200_INT1_EN) << (2*i))) {
+ pr_info("No registered ISR for slot [%s %d:%d]!. IRQ will be disabled.\n",
+ TPCI200_SHORTNAME,
+ tpci200->number, i);
+ reg_value = readw(
+ (unsigned short *)(tpci200->info->interface_regs + control_reg[i]));
+ reg_value &= ~(TPCI200_INT0_EN | TPCI200_INT1_EN);
+ writew(reg_value,
+ (unsigned short *)(tpci200->info->interface_regs + control_reg[i]));
+ }
+ }
+ }
+
+ spin_unlock_irqrestore(&tpci200->info->access_lock, flags);
+ return ret;
+}
+
+#ifdef CONFIG_SYSFS
+
+struct ipack_device *tpci200_slot_register(const char *board_name, int size, unsigned int tpci200_number,
+ unsigned int slot_position)
+{
+ int found = 0;
+ struct ipack_device *dev = NULL;
+ struct tpci200_board *tpci200;
+
+ list_for_each_entry(tpci200, &tpci200_list, list) {
+ if (tpci200->number == tpci200_number) {
+ found = 1;
+ break;
+ }
+ }
+
+ if (!found) {
+ pr_err("carrier board not found for the device\n");
+ return NULL;
+ }
+
+ if (slot_position >= TPCI200_NB_SLOT) {
+ pr_info("Slot [%s %d:%d] doesn't exist! Last tpci200 slot is %d.\n",
+ TPCI200_SHORTNAME,
+ tpci200_number, slot_position,
+ TPCI200_NB_SLOT-1);
+ goto out;
+ }
+
+ if (mutex_lock_interruptible(&tpci200->mutex))
+ goto out;
+
+ if (tpci200->slots[slot_position].dev != NULL) {
+ pr_err("Slot [%s %d:%d] already installed !\n",
+ TPCI200_SHORTNAME,
+ tpci200_number, slot_position);
+ goto out_unlock;
+ }
+
+ dev = kzalloc(sizeof(struct ipack_device), GFP_KERNEL);
+ if (dev == NULL) {
+ pr_info("Slot [%s %d:%d] Unable to allocate memory for new slot !\n",
+ TPCI200_SHORTNAME,
+ tpci200_number, slot_position);
+ goto out_unlock;
+ }
+
+ if (size > IPACK_BOARD_NAME_SIZE) {
+ pr_warning("Slot [%s %d:%d] name (%s) too long (%d > %d). Will be truncated!\n",
+ TPCI200_SHORTNAME,
+ tpci200_number, slot_position,
+ board_name, (int)strlen(board_name), IPACK_BOARD_NAME_SIZE);
+
+ size = IPACK_BOARD_NAME_SIZE;
+ }
+
+ strncpy(dev->board_name, board_name, size-1);
+ dev->board_name[size-1] = '\0';
+ dev->bus_nr = tpci200->info->drv.bus_nr;
+ dev->slot = slot_position;
+ /*
+ * Give the same IRQ number as the slot number.
+ * The TPCI200 has assigned his own two IRQ by PCI bus driver
+ */
+ dev->irq = slot_position;
+
+ dev->id_space.address = NULL;
+ dev->id_space.size = 0;
+ dev->io_space.address = NULL;
+ dev->io_space.size = 0;
+ dev->mem_space.address = NULL;
+ dev->mem_space.size = 0;
+
+ /* Give the operations structure */
+ dev->ops = &tpci200_bus_ops;
+ tpci200->slots[slot_position].dev = dev;
+
+ if (ipack_device_register(dev) < 0) {
+ tpci200_slot_unregister(dev);
+ kfree(dev);
+ }
+
+out_unlock:
+ mutex_unlock(&tpci200->mutex);
+out:
+ return dev;
+}
+
+static ssize_t tpci200_store_board(struct device *pdev, const char *buf, size_t count, int slot)
+{
+ struct tpci200_board *card = dev_get_drvdata(pdev);
+ struct ipack_device *dev = card->slots[slot].dev;
+
+ if (dev != NULL)
+ return -EBUSY;
+
+ dev = tpci200_slot_register(buf, count, card->number, slot);
+ if (dev == NULL)
+ return -ENODEV;
+
+ return count;
+}
+
+static ssize_t tpci200_show_board(struct device *pdev, char *buf, int slot)
+{
+ struct tpci200_board *card = dev_get_drvdata(pdev);
+ struct ipack_device *dev = card->slots[slot].dev;
+
+ if (dev != NULL)
+ return snprintf(buf, PAGE_SIZE, "%s\n", dev->board_name);
+ else
+ return snprintf(buf, PAGE_SIZE, "none\n");
+}
+
+
+ static ssize_t
+tpci200_show_description(struct device *pdev, struct device_attribute *attr, char *buf)
+{
+ return snprintf(buf, PAGE_SIZE, "TEWS tpci200 carrier PCI for Industry-pack mezzanines.\n");
+}
+
+ static ssize_t
+tpci200_show_board_slot0(struct device *pdev, struct device_attribute *attr, char *buf)
+{
+ return tpci200_show_board(pdev, buf, 0);
+}
+
+ static ssize_t
+tpci200_store_board_slot0(struct device *pdev, struct device_attribute *attr, const char *buf, size_t count)
+{
+ return tpci200_store_board(pdev, buf, count, 0);
+}
+
+ static ssize_t
+tpci200_show_board_slot1(struct device *pdev, struct device_attribute *attr, char *buf)
+{
+ return tpci200_show_board(pdev, buf, 1);
+}
+
+ static ssize_t
+tpci200_store_board_slot1(struct device *pdev, struct device_attribute *attr, const char *buf, size_t count)
+{
+ return tpci200_store_board(pdev, buf, count, 1);
+}
+
+ static ssize_t
+tpci200_show_board_slot2(struct device *pdev, struct device_attribute *attr, char *buf)
+{
+ return tpci200_show_board(pdev, buf, 2);
+}
+
+ static ssize_t
+tpci200_store_board_slot2(struct device *pdev, struct device_attribute *attr, const char *buf, size_t count)
+{
+ return tpci200_store_board(pdev, buf, count, 2);
+}
+
+
+ static ssize_t
+tpci200_show_board_slot3(struct device *pdev, struct device_attribute *attr, char *buf)
+{
+ return tpci200_show_board(pdev, buf, 3);
+}
+
+ static ssize_t
+tpci200_store_board_slot3(struct device *pdev, struct device_attribute *attr, const char *buf, size_t count)
+{
+ return tpci200_store_board(pdev, buf, count, 3);
+}
+
+/* Declaration of the device attributes for the TPCI200 */
+static DEVICE_ATTR(description, S_IRUGO, tpci200_show_description, NULL);
+static DEVICE_ATTR(board_slot0, S_IRUGO | S_IWUSR, tpci200_show_board_slot0, tpci200_store_board_slot0);
+static DEVICE_ATTR(board_slot1, S_IRUGO | S_IWUSR, tpci200_show_board_slot1, tpci200_store_board_slot1);
+static DEVICE_ATTR(board_slot2, S_IRUGO | S_IWUSR, tpci200_show_board_slot2, tpci200_store_board_slot2);
+static DEVICE_ATTR(board_slot3, S_IRUGO | S_IWUSR, tpci200_show_board_slot3, tpci200_store_board_slot3);
+
+static struct attribute *tpci200_attrs[] = {
+ &dev_attr_description.attr,
+ &dev_attr_board_slot0.attr,
+ &dev_attr_board_slot1.attr,
+ &dev_attr_board_slot2.attr,
+ &dev_attr_board_slot3.attr,
+ NULL,
+};
+
+static struct attribute_group tpci200_attr_group = {
+ .attrs = tpci200_attrs,
+};
+
+int tpci200_create_sysfs_files(struct tpci200_board *card)
+{
+ return sysfs_create_group(&card->info->pdev->dev.kobj, &tpci200_attr_group);
+}
+
+void tpci200_remove_sysfs_files(struct tpci200_board *card)
+{
+ sysfs_remove_group(&card->info->pdev->dev.kobj, &tpci200_attr_group);
+}
+
+#else
+
+int tpci200_create_sysfs_files(struct tpci200_board *card)
+{
+ return 0;
+}
+
+void tpci200_remove_sysfs_files(struct tpci200_board *card)
+{
+}
+
+#endif /* CONFIG_SYSFS */
+
+static int tpci200_register(struct tpci200_board *tpci200)
+{
+ int i;
+ int res;
+ unsigned long ioidint_base;
+ unsigned long mem_base;
+ unsigned short slot_ctrl;
+
+ if (pci_enable_device(tpci200->info->pdev) < 0)
+ return -ENODEV;
+
+ if (tpci200_create_sysfs_files(tpci200) < 0) {
+ pr_err("failed creating sysfs files\n");
+ res = -EFAULT;
+ goto out_disable_pci;
+ }
+
+ /* Request IP interface register (Bar 2) */
+ res = pci_request_region(tpci200->info->pdev, TPCI200_IP_INTERFACE_BAR, "Carrier IP interface registers");
+ if (res) {
+ pr_err("(bn 0x%X, sn 0x%X, vid 0x%X, did 0x%X, svid 0x%X, sdid 0x%X) failed to allocate PCI resource for BAR 2 !",
+ tpci200->info->pdev->bus->number,
+ tpci200->info->pdev->devfn,
+ tpci200->info->pdev->vendor,
+ tpci200->info->pdev->device,
+ tpci200->info->pdev->subsystem_vendor,
+ tpci200->info->pdev->subsystem_device);
+ goto out_remove_sysfs;
+ }
+
+ /* Request IO ID INT space (Bar 3) */
+ res = pci_request_region(tpci200->info->pdev, TPCI200_IO_ID_INT_SPACES_BAR, "Carrier IO ID INT space");
+ if (res) {
+ pr_err("(bn 0x%X, sn 0x%X, vid 0x%X, did 0x%X, svid 0x%X, sdid 0x%X) failed to allocate PCI resource for BAR 3 !",
+ tpci200->info->pdev->bus->number,
+ tpci200->info->pdev->devfn,
+ tpci200->info->pdev->vendor,
+ tpci200->info->pdev->device,
+ tpci200->info->pdev->subsystem_vendor,
+ tpci200->info->pdev->subsystem_device);
+ goto out_release_ip_space;
+ }
+
+ /* Request MEM space (Bar 4) */
+ res = pci_request_region(tpci200->info->pdev,
+ TPCI200_MEM8_SPACE_BAR,
+ "Carrier MEM space");
+ if (res) {
+ pr_err("(bn 0x%X, sn 0x%X, vid 0x%X, did 0x%X, svid 0x%X, sdid 0x%X) failed to allocate PCI resource for BAR 4!",
+ tpci200->info->pdev->bus->number,
+ tpci200->info->pdev->devfn,
+ tpci200->info->pdev->vendor,
+ tpci200->info->pdev->device,
+ tpci200->info->pdev->subsystem_vendor,
+ tpci200->info->pdev->subsystem_device);
+ goto out_release_ioid_int_space;
+ }
+
+ /* Map internal tpci200 driver user space */
+ tpci200->info->interface_regs =
+ ioremap(
+ pci_resource_start(tpci200->info->pdev, TPCI200_IP_INTERFACE_BAR),
+ TPCI200_IFACE_SIZE);
+ tpci200->info->ioidint_space =
+ ioremap(
+ pci_resource_start(tpci200->info->pdev, TPCI200_IO_ID_INT_SPACES_BAR),
+ TPCI200_IOIDINT_SIZE);
+ tpci200->info->mem8_space =
+ ioremap(
+ pci_resource_start(tpci200->info->pdev, TPCI200_MEM8_SPACE_BAR),
+ TPCI200_MEM8_SIZE);
+
+ spin_lock_init(&tpci200->info->access_lock);
+ ioidint_base = pci_resource_start(tpci200->info->pdev,
+ TPCI200_IO_ID_INT_SPACES_BAR);
+ mem_base = pci_resource_start(tpci200->info->pdev, TPCI200_MEM8_SPACE_BAR);
+
+ /* Set the default parameters of the slot
+ * INT0 disabled, level sensitive
+ * INT1 disabled, level sensitive
+ * error interrupt disabled
+ * timeout interrupt disabled
+ * recover time disabled
+ * clock rate 8 MHz
+ */
+ slot_ctrl = 0;
+
+ /* Set all slot physical address space */
+ for (i = 0; i < TPCI200_NB_SLOT; i++) {
+ tpci200->slots[i].io_phys.address =
+ (void *)ioidint_base + TPCI200_IO_SPACE_OFF + TPCI200_IO_SPACE_GAP*i;
+ tpci200->slots[i].io_phys.size = TPCI200_IO_SPACE_SIZE;
+
+ tpci200->slots[i].id_phys.address =
+ (void *)ioidint_base + TPCI200_ID_SPACE_OFF + TPCI200_ID_SPACE_GAP*i;
+ tpci200->slots[i].id_phys.size = TPCI200_ID_SPACE_SIZE;
+
+ tpci200->slots[i].mem_phys.address = (void *)mem_base + TPCI200_MEM8_GAP*i;
+ tpci200->slots[i].mem_phys.size = TPCI200_MEM8_SIZE;
+
+ writew(slot_ctrl,
+ (unsigned short *)(tpci200->info->interface_regs + control_reg[i]));
+ }
+
+ res = request_irq(tpci200->info->pdev->irq,
+ tpci200_interrupt, IRQF_SHARED,
+ TPCI200_SHORTNAME,
+ (void *) tpci200);
+ if (res) {
+ pr_err("(bn 0x%X, sn 0x%X, vid 0x%X, did 0x%X, svid 0x%X, sdid 0x%X) unable to register IRQ !",
+ tpci200->info->pdev->bus->number,
+ tpci200->info->pdev->devfn,
+ TPCI200_VENDOR_ID,
+ TPCI200_DEVICE_ID,
+ TPCI200_SUBVENDOR_ID,
+ TPCI200_SUBDEVICE_ID);
+ tpci200_unregister(tpci200);
+ goto out_err;
+ }
+
+ return 0;
+
+out_release_ioid_int_space:
+ pci_release_region(tpci200->info->pdev, TPCI200_IO_ID_INT_SPACES_BAR);
+out_release_ip_space:
+ pci_release_region(tpci200->info->pdev, TPCI200_IP_INTERFACE_BAR);
+out_remove_sysfs:
+ tpci200_remove_sysfs_files(tpci200);
+out_disable_pci:
+ pci_disable_device(tpci200->info->pdev);
+out_err:
+ return res;
+}
+
+static int __tpci200_request_irq(struct tpci200_board *tpci200, struct ipack_device *dev)
+{
+ unsigned short slot_ctrl;
+
+ /* Set the default parameters of the slot
+ * INT0 enabled, level sensitive
+ * INT1 enabled, level sensitive
+ * error interrupt disabled
+ * timeout interrupt disabled
+ * recover time disabled
+ * clock rate 8 MHz
+ */
+ slot_ctrl = TPCI200_INT0_EN | TPCI200_INT1_EN;
+ writew(slot_ctrl, (unsigned short *)(tpci200->info->interface_regs + control_reg[dev->slot]));
+
+ return 0;
+}
+
+static void __tpci200_free_irq(struct tpci200_board *tpci200, struct ipack_device *dev)
+{
+ unsigned short slot_ctrl;
+
+ /* Set the default parameters of the slot
+ * INT0 disabled, level sensitive
+ * INT1 disabled, level sensitive
+ * error interrupt disabled
+ * timeout interrupt disabled
+ * recover time disabled
+ * clock rate 8 MHz
+ */
+ slot_ctrl = 0;
+ writew(slot_ctrl, (unsigned short *)(tpci200->info->interface_regs + control_reg[dev->slot]));
+}
+
+int tpci200_free_irq(struct ipack_device *dev)
+{
+ int res;
+ struct slot_irq *slot_irq;
+ struct tpci200_board *tpci200;
+
+ tpci200 = check_slot(dev);
+ if (tpci200 == NULL) {
+ res = -EINVAL;
+ goto out;
+ }
+
+ if (mutex_lock_interruptible(&tpci200->mutex)) {
+ res = -ERESTARTSYS;
+ goto out;
+ }
+
+ if (tpci200->slots[dev->slot].irq == NULL) {
+ res = -EINVAL;
+ goto out_unlock;
+ }
+
+ __tpci200_free_irq(tpci200, dev);
+ slot_irq = tpci200->slots[dev->slot].irq;
+ tpci200->slots[dev->slot].irq = NULL;
+ kfree(slot_irq);
+
+out_unlock:
+ mutex_unlock(&tpci200->mutex);
+out:
+ return res;
+}
+
+int tpci200_slot_unmap_space(struct ipack_device *dev, int space)
+{
+ int res;
+ struct ipack_addr_space *virt_addr_space;
+ struct tpci200_board *tpci200;
+
+ tpci200 = check_slot(dev);
+ if (tpci200 == NULL) {
+ res = -EINVAL;
+ goto out;
+ }
+
+ if (mutex_lock_interruptible(&tpci200->mutex)) {
+ res = -ERESTARTSYS;
+ goto out;
+ }
+
+ switch (space) {
+ case IPACK_IO_SPACE:
+ if (dev->io_space.address == NULL) {
+ pr_info("Slot [%s %d:%d] IO space not mapped !\n",
+ TPCI200_SHORTNAME,
+ dev->bus_nr, dev->slot);
+ goto out_unlock;
+ }
+ virt_addr_space = &dev->io_space;
+ break;
+ case IPACK_ID_SPACE:
+ if (dev->id_space.address == NULL) {
+ pr_info("Slot [%s %d:%d] ID space not mapped !\n",
+ TPCI200_SHORTNAME,
+ dev->bus_nr, dev->slot);
+ goto out_unlock;
+ }
+ virt_addr_space = &dev->id_space;
+ break;
+ case IPACK_MEM_SPACE:
+ if (dev->mem_space.address == NULL) {
+ pr_info("Slot [%s %d:%d] MEM space not mapped !\n",
+ TPCI200_SHORTNAME,
+ dev->bus_nr, dev->slot);
+ goto out_unlock;
+ }
+ virt_addr_space = &dev->mem_space;
+ break;
+ default:
+ pr_err("Slot [%s %d:%d] space number %d doesn't exist !\n",
+ TPCI200_SHORTNAME,
+ dev->bus_nr, dev->slot, space);
+ res = -EINVAL;
+ goto out_unlock;
+ break;
+ }
+
+ iounmap(virt_addr_space->address);
+
+ virt_addr_space->address = NULL;
+ virt_addr_space->size = 0;
+out_unlock:
+ mutex_unlock(&tpci200->mutex);
+out:
+ return res;
+}
+
+int tpci200_slot_unregister(struct ipack_device *dev)
+{
+ struct tpci200_board *tpci200;
+
+ if (dev == NULL)
+ return -ENODEV;
+
+ tpci200 = check_slot(dev);
+ if (tpci200 == NULL)
+ return -EINVAL;
+
+ tpci200_free_irq(dev);
+
+ if (mutex_lock_interruptible(&tpci200->mutex))
+ return -ERESTARTSYS;
+
+ ipack_device_unregister(dev);
+ kfree(dev);
+ tpci200->slots[dev->slot].dev = NULL;
+ mutex_unlock(&tpci200->mutex);
+
+ return 0;
+}
+
+int tpci200_slot_map_space(struct ipack_device *dev, unsigned int memory_size, int space)
+{
+ int res;
+ unsigned int size_to_map;
+ void *phys_address;
+ struct ipack_addr_space *virt_addr_space;
+ struct tpci200_board *tpci200;
+
+ tpci200 = check_slot(dev);
+ if (tpci200 == NULL) {
+ res = -EINVAL;
+ goto out;
+ }
+
+ if (mutex_lock_interruptible(&tpci200->mutex)) {
+ res = -ERESTARTSYS;
+ goto out;
+ }
+
+ switch (space) {
+ case IPACK_IO_SPACE:
+ if (dev->io_space.address != NULL) {
+ pr_err("Slot [%s %d:%d] IO space already mapped !\n",
+ TPCI200_SHORTNAME,
+ tpci200->number, dev->slot);
+ res = -EINVAL;
+ goto out_unlock;
+ }
+ virt_addr_space = &dev->io_space;
+
+ phys_address = tpci200->slots[dev->slot].io_phys.address;
+ size_to_map = tpci200->slots[dev->slot].io_phys.size;
+ break;
+ case IPACK_ID_SPACE:
+ if (dev->id_space.address != NULL) {
+ pr_err("Slot [%s %d:%d] ID space already mapped !\n",
+ TPCI200_SHORTNAME,
+ tpci200->number, dev->slot);
+ res = -EINVAL;
+ goto out_unlock;
+ }
+ virt_addr_space = &dev->id_space;
+
+ phys_address = tpci200->slots[dev->slot].id_phys.address;
+ size_to_map = tpci200->slots[dev->slot].id_phys.size;
+ break;
+ case IPACK_MEM_SPACE:
+ if (dev->mem_space.address != NULL) {
+ pr_err("Slot [%s %d:%d] MEM space already mapped !\n",
+ TPCI200_SHORTNAME,
+ tpci200->number, dev->slot);
+ res = -EINVAL;
+ goto out_unlock;
+ }
+ virt_addr_space = &dev->mem_space;
+
+ if (memory_size > tpci200->slots[dev->slot].mem_phys.size) {
+ pr_err("Slot [%s %d:%d] request is 0x%X memory, only 0x%X available !\n",
+ TPCI200_SHORTNAME,
+ dev->bus_nr,
+ dev->slot,
+ memory_size,
+ tpci200->slots[dev->slot].mem_phys.size);
+ res = -EINVAL;
+ goto out_unlock;
+ }
+
+ phys_address = tpci200->slots[dev->slot].mem_phys.address;
+ size_to_map = memory_size;
+ break;
+ default:
+ pr_err("Slot [%s %d:%d] space %d doesn't exist !\n",
+ TPCI200_SHORTNAME,
+ tpci200->number, dev->slot, space);
+ res = -EINVAL;
+ goto out_unlock;
+ break;
+ }
+
+ virt_addr_space->size = size_to_map;
+ virt_addr_space->address = ioremap((unsigned long)phys_address, size_to_map);
+
+out_unlock:
+ mutex_unlock(&tpci200->mutex);
+out:
+ return res;
+}
+
+int tpci200_request_irq(struct ipack_device *dev, int vector, int (*handler)(void *), void *arg)
+{
+ int res;
+ struct slot_irq *slot_irq;
+ struct tpci200_board *tpci200;
+
+ tpci200 = check_slot(dev);
+ if (tpci200 == NULL) {
+ res = -EINVAL;
+ goto out;
+ }
+
+ if (mutex_lock_interruptible(&tpci200->mutex)) {
+ res = -ERESTARTSYS;
+ goto out;
+ }
+
+ if (tpci200->slots[dev->slot].irq != NULL) {
+ pr_err("Slot [%s %d:%d] IRQ already registered !\n",
+ TPCI200_SHORTNAME,
+ dev->bus_nr, dev->slot);
+ res = -EINVAL;
+ goto out_unlock;
+ }
+
+ slot_irq = kzalloc(sizeof(struct slot_irq), GFP_KERNEL);
+ if (slot_irq == NULL) {
+ pr_err("Slot [%s %d:%d] unable to allocate memory for IRQ !\n",
+ TPCI200_SHORTNAME,
+ dev->bus_nr, dev->slot);
+ res = -ENOMEM;
+ goto out_unlock;
+ }
+
+ /*
+ * WARNING: Setup Interrupt Vector in the IndustryPack device
+ * before an IRQ request.
+ * Read the User Manual of your IndustryPack device to know
+ * where to write the vector in memory.
+ */
+ slot_irq->vector = vector;
+ slot_irq->handler = handler;
+ slot_irq->arg = arg;
+ if (dev->board_name) {
+ if (strlen(dev->board_name) > IPACK_IRQ_NAME_SIZE) {
+ pr_warning("Slot [%s %d:%d] IRQ name too long (%d char > %d char MAX). Will be truncated!\n",
+ TPCI200_SHORTNAME,
+ dev->bus_nr, dev->slot,
+ (int)strlen(dev->board_name),
+ IPACK_IRQ_NAME_SIZE);
+ }
+ strncpy(slot_irq->name, dev->board_name, IPACK_IRQ_NAME_SIZE-1);
+ } else {
+ strcpy(slot_irq->name, "Unknown");
+ }
+
+ tpci200->slots[dev->slot].irq = slot_irq;
+ res = __tpci200_request_irq(tpci200, dev);
+
+out_unlock:
+ mutex_unlock(&tpci200->mutex);
+out:
+ return res;
+}
+
+static void tpci200_uninstall(struct tpci200_board *tpci200)
+{
+ int i;
+
+ for (i = 0; i < TPCI200_NB_SLOT; i++) {
+ if (tpci200->slots[i].dev == NULL)
+ continue;
+ else
+ tpci200->slots[i].dev->driver->ops->remove(tpci200->slots[i].dev);
+ }
+
+ tpci200_unregister(tpci200);
+
+ if (tpci200->slots != NULL)
+ kfree(tpci200->slots);
+}
+
+struct ipack_bus_ops tpci200_bus_ops = {
+ .map_space = tpci200_slot_map_space,
+ .unmap_space = tpci200_slot_unmap_space,
+ .request_irq = tpci200_request_irq,
+ .free_irq = tpci200_free_irq,
+ .read8 = tpci200_read8,
+ .read16 = tpci200_read16,
+ .read32 = tpci200_read32,
+ .write8 = tpci200_write8,
+ .write16 = tpci200_write16,
+ .write32 = tpci200_write32,
+ .remove_device = tpci200_slot_unregister,
+};
+
+static int tpci200_install(struct tpci200_board *tpci200)
+{
+ int res;
+
+ tpci200->slots = kzalloc(TPCI200_NB_SLOT * sizeof(struct tpci200_slot), GFP_KERNEL);
+ if (tpci200->slots == NULL) {
+ res = -ENOMEM;
+ goto out_err;
+ }
+
+ res = tpci200_register(tpci200);
+ if (res)
+ goto out_free;
+
+ mutex_init(&tpci200->mutex);
+ return 0;
+
+out_free:
+ kfree(tpci200->slots);
+ tpci200->slots = NULL;
+out_err:
+ return res;
+}
+
+static int tpci200_pciprobe(struct pci_dev *pdev, const struct pci_device_id *id)
+{
+ int ret;
+ struct tpci200_board *tpci200;
+
+ tpci200 = kzalloc(sizeof(struct tpci200_board), GFP_KERNEL);
+ if (!tpci200)
+ return -ENOMEM;
+
+ tpci200->info = kzalloc(sizeof(struct tpci200_infos), GFP_KERNEL);
+ if (!tpci200->info) {
+ kfree(tpci200);
+ return -ENOMEM;
+ }
+
+ /* Save struct pci_dev pointer */
+ tpci200->info->pdev = pdev;
+ tpci200->info->id_table = (struct pci_device_id *)id;
+
+ /* register the device and initialize it */
+ ret = tpci200_install(tpci200);
+ if (ret) {
+ pr_err("Error during tpci200 install !\n");
+ kfree(tpci200->info);
+ kfree(tpci200);
+ return -ENODEV;
+ }
+
+ tpci200->info->drv.dev = &pdev->dev;
+ tpci200->info->drv.slots = TPCI200_NB_SLOT;
+
+ /* Register the bus in the industry pack driver */
+ ret = ipack_bus_register(&tpci200->info->drv);
+ if (ret < 0) {
+ pr_err("error registering the carrier on ipack driver\n");
+ tpci200_uninstall(tpci200);
+ kfree(tpci200->info);
+ kfree(tpci200);
+ return -EFAULT;
+ }
+ /* save the bus number given by ipack to logging purpose */
+ tpci200->number = tpci200->info->drv.bus_nr;
+ dev_set_drvdata(&pdev->dev, tpci200);
+ /* add the registered device in an internal linked list */
+ list_add_tail(&tpci200->list, &tpci200_list);
+ return ret;
+}
+
+static void __tpci200_pci_remove(struct tpci200_board *tpci200)
+{
+ tpci200_uninstall(tpci200);
+ tpci200_remove_sysfs_files(tpci200);
+ list_del(&tpci200->list);
+ ipack_bus_unregister(&tpci200->info->drv);
+ kfree(tpci200);
+}
+
+static void __devexit tpci200_pci_remove(struct pci_dev *dev)
+{
+ struct tpci200_board *tpci200, *next;
+
+ /* Search the registered device to uninstall it */
+ list_for_each_entry_safe(tpci200, next, &tpci200_list, list) {
+ if (tpci200->info->pdev == dev) {
+ __tpci200_pci_remove(tpci200);
+ break;
+ }
+ }
+}
+
+static struct pci_device_id tpci200_idtable[2] = {
+ { TPCI200_VENDOR_ID, TPCI200_DEVICE_ID, TPCI200_SUBVENDOR_ID,
+ TPCI200_SUBDEVICE_ID },
+ { 0, },
+};
+
+static struct pci_driver tpci200_pci_drv = {
+ .name = "tpci200",
+ .id_table = tpci200_idtable,
+ .probe = tpci200_pciprobe,
+ .remove = __devexit_p(tpci200_pci_remove),
+};
+
+static int __init tpci200_drvr_init_module(void)
+{
+ return pci_register_driver(&tpci200_pci_drv);
+}
+
+static void __exit tpci200_drvr_exit_module(void)
+{
+ struct tpci200_board *tpci200, *next;
+
+ list_for_each_entry_safe(tpci200, next, &tpci200_list, list)
+ __tpci200_pci_remove(tpci200);
+
+ pci_unregister_driver(&tpci200_pci_drv);
+}
+
+MODULE_DESCRIPTION("TEWS TPCI-200 device driver");
+MODULE_LICENSE("GPL");
+module_init(tpci200_drvr_init_module);
+module_exit(tpci200_drvr_exit_module);
+
diff --git a/drivers/staging/ipack/bridges/tpci200.h b/drivers/staging/ipack/bridges/tpci200.h
new file mode 100644
index 0000000..e452da2
--- /dev/null
+++ b/drivers/staging/ipack/bridges/tpci200.h
@@ -0,0 +1,165 @@
+/**
+ * tpci200.h
+ *
+ * driver for the carrier TEWS TPCI-200
+ * Copyright (c) 2009 Nicolas Serafini, EIC2 SA
+ * Copyright (c) 2010,2011 Samuel Iglesias Gonsalvez <[email protected]>, CERN
+ * Copyright (c) 2012 Samuel Iglesias Gonsalvez <[email protected]>, Igalia
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the Free
+ * Software Foundation; either version 2 of the License, or (at your option)
+ * any later version.
+ */
+
+#ifndef _TPCI200_H_
+#define _TPCI200_H_
+
+#include <linux/version.h>
+#include <linux/limits.h>
+#include <linux/pci.h>
+#include <linux/spinlock.h>
+#include <linux/interrupt.h>
+#include <linux/swab.h>
+#include <linux/io.h>
+
+#include "../ipack.h"
+
+#define TPCI200_SHORTNAME "TPCI200"
+
+#define TPCI200_NB_SLOT 0x4
+#define TPCI200_NB_BAR 0x6
+
+#define TPCI200_VENDOR_ID 0x1498
+#define TPCI200_DEVICE_ID 0x30C8
+#define TPCI200_SUBVENDOR_ID 0x1498
+#define TPCI200_SUBDEVICE_ID 0x300A
+
+#define TPCI200_IP_INTERFACE_BAR 2
+#define TPCI200_IO_ID_INT_SPACES_BAR 3
+#define TPCI200_MEM16_SPACE_BAR 4
+#define TPCI200_MEM8_SPACE_BAR 5
+
+#define TPCI200_REVISION_REG 0x00
+#define TPCI200_CONTROL_A_REG 0x02
+#define TPCI200_CONTROL_B_REG 0x04
+#define TPCI200_CONTROL_C_REG 0x06
+#define TPCI200_CONTROL_D_REG 0x08
+#define TPCI200_RESET_REG 0x0A
+#define TPCI200_STATUS_REG 0x0C
+
+#define TPCI200_IFACE_SIZE 0x100
+
+#define TPCI200_IO_SPACE_OFF 0x0000
+#define TPCI200_IO_SPACE_GAP 0x0100
+#define TPCI200_IO_SPACE_SIZE 0x0080
+#define TPCI200_ID_SPACE_OFF 0x0080
+#define TPCI200_ID_SPACE_GAP 0x0100
+#define TPCI200_ID_SPACE_SIZE 0x0040
+#define TPCI200_INT_SPACE_OFF 0x00C0
+#define TPCI200_INT_SPACE_GAP 0x0100
+#define TPCI200_INT_SPACE_SIZE 0x0040
+#define TPCI200_IOIDINT_SIZE 0x0400
+
+#define TPCI200_MEM8_GAP 0x00400000
+#define TPCI200_MEM8_SIZE 0x00400000
+#define TPCI200_MEM16_GAP 0x00800000
+#define TPCI200_MEM16_SIZE 0x00800000
+
+#define TPCI200_INT0_EN 0x0040
+#define TPCI200_INT1_EN 0x0080
+#define TPCI200_INT0_EDGE 0x0010
+#define TPCI200_INT1_EDGE 0x0020
+#define TPCI200_ERR_INT_EN 0x0008
+#define TPCI200_TIME_INT_EN 0x0004
+#define TPCI200_RECOVER_EN 0x0002
+#define TPCI200_CLK32 0x0001
+
+#define TPCI200_A_RESET 0x0001
+#define TPCI200_B_RESET 0x0002
+#define TPCI200_C_RESET 0x0004
+#define TPCI200_D_RESET 0x0008
+
+#define TPCI200_A_TIMEOUT 0x1000
+#define TPCI200_B_TIMEOUT 0x2000
+#define TPCI200_C_TIMEOUT 0x4000
+#define TPCI200_D_TIMEOUT 0x8000
+
+#define TPCI200_A_ERROR 0x0100
+#define TPCI200_B_ERROR 0x0200
+#define TPCI200_C_ERROR 0x0400
+#define TPCI200_D_ERROR 0x0800
+
+#define TPCI200_A_INT0 0x0001
+#define TPCI200_A_INT1 0x0002
+#define TPCI200_B_INT0 0x0004
+#define TPCI200_B_INT1 0x0008
+#define TPCI200_C_INT0 0x0010
+#define TPCI200_C_INT1 0x0020
+#define TPCI200_D_INT0 0x0040
+#define TPCI200_D_INT1 0x0080
+
+#define TPCI200_SLOT_INT_MASK 0x00FF
+
+#define VME_IOID_SPACE "IOID"
+#define VME_MEM_SPACE "MEM"
+
+/**
+ * struct slot_irq - slot IRQ definition.
+ * @vector Vector number
+ * @handler Handler called when IRQ arrives
+ * @arg Handler argument
+ * @name IRQ name
+ *
+ */
+struct slot_irq {
+ int vector;
+ int (*handler)(void *);
+ void *arg;
+ char name[IPACK_IRQ_NAME_SIZE];
+};
+
+/**
+ * struct tpci200_slot - data specific to the tpci200 slot.
+ * @slot_id Slot identification gived to external interface
+ * @irq Slot IRQ infos
+ * @io_phys IO physical base address register of the slot
+ * @id_phys ID physical base address register of the slot
+ * @mem_phys MEM physical base address register of the slot
+ *
+ */
+struct tpci200_slot {
+ struct ipack_device *dev;
+ struct slot_irq *irq;
+ struct ipack_addr_space io_phys;
+ struct ipack_addr_space id_phys;
+ struct ipack_addr_space mem_phys;
+};
+
+/**
+ * struct tpci200_infos - informations specific of the TPCI200 tpci200.
+ * @pci_dev PCI device
+ * @interface_regs Pointer to IP interface space (Bar 2)
+ * @ioidint_space Pointer to IP ID, IO and INT space (Bar 3)
+ * @mem8_space Pointer to MEM space (Bar 4)
+ * @access_lock Mutex lock for simultaneous access
+ *
+ */
+struct tpci200_infos {
+ struct pci_dev *pdev;
+ struct pci_device_id *id_table;
+ void *interface_regs;
+ void *ioidint_space;
+ void *mem8_space;
+ spinlock_t access_lock;
+ struct ipack_bus_device drv;
+};
+struct tpci200_board {
+ struct list_head list;
+ unsigned int number;
+ struct mutex mutex;
+ struct tpci200_slot *slots;
+ struct tpci200_infos *info;
+};
+
+#endif /* _TPCI200_H_ */
--
1.7.10
IP-OCTAL is a 8-channels serial port device. There are several models one per
each standard: RS-232, RS-422, RS-485.
This driver can manage all of them.
Signed-off-by: Samuel Iglesias Gonsalvez <[email protected]>
---
drivers/staging/ipack/Kconfig | 2 +
drivers/staging/ipack/Makefile | 1 +
drivers/staging/ipack/TODO | 9 +
drivers/staging/ipack/devices/Kconfig | 7 +
drivers/staging/ipack/devices/Makefile | 1 +
drivers/staging/ipack/devices/ipoctal.c | 871 +++++++++++++++++++++++++++++++
drivers/staging/ipack/devices/ipoctal.h | 81 +++
drivers/staging/ipack/devices/scc2698.h | 229 ++++++++
8 files changed, 1201 insertions(+)
create mode 100644 drivers/staging/ipack/devices/Kconfig
create mode 100644 drivers/staging/ipack/devices/Makefile
create mode 100644 drivers/staging/ipack/devices/ipoctal.c
create mode 100644 drivers/staging/ipack/devices/ipoctal.h
create mode 100644 drivers/staging/ipack/devices/scc2698.h
diff --git a/drivers/staging/ipack/Kconfig b/drivers/staging/ipack/Kconfig
index a3f5925..7fa8676 100644
--- a/drivers/staging/ipack/Kconfig
+++ b/drivers/staging/ipack/Kconfig
@@ -10,6 +10,8 @@ menuconfig IPACK_BUS
if IPACK_BUS
+source "drivers/staging/ipack/devices/Kconfig"
+
source "drivers/staging/ipack/bridges/Kconfig"
endif # IPACK
diff --git a/drivers/staging/ipack/Makefile b/drivers/staging/ipack/Makefile
index 59b8762..85ff223 100644
--- a/drivers/staging/ipack/Makefile
+++ b/drivers/staging/ipack/Makefile
@@ -2,4 +2,5 @@
# Makefile for the IPACK bridge device drivers.
#
obj-$(CONFIG_IPACK_BUS) += ipack.o
+obj-y += devices/
obj-y += bridges/
diff --git a/drivers/staging/ipack/TODO b/drivers/staging/ipack/TODO
index d5a5735..11828ed 100644
--- a/drivers/staging/ipack/TODO
+++ b/drivers/staging/ipack/TODO
@@ -22,6 +22,15 @@ TPCI-200
* It has a linked list with the tpci200 devices it is managing. Get rid of it
and use driver_for_each_device() instead.
+IP-OCTAL
+--------
+
+* It has a linked list which saves the devices it is currently
+ managing. It should use the driver_for_each_device() function. It is not there
+ due to the impossibility of using container_of macro to recover the
+ corresponding "struct ipoctal" because the attribute "struct ipack_device" is
+ a pointer. This code should be refactored.
+
Ipack
-----
diff --git a/drivers/staging/ipack/devices/Kconfig b/drivers/staging/ipack/devices/Kconfig
new file mode 100644
index 0000000..a8b61e2
--- /dev/null
+++ b/drivers/staging/ipack/devices/Kconfig
@@ -0,0 +1,7 @@
+config SERIAL_IPOCTAL
+ bool "IndustryPack IP-OCTAL uart support"
+ depends on IPACK_BUS
+ help
+ This driver supports the IPOCTAL serial port device for the IndustryPack bus.
+ default n
+
diff --git a/drivers/staging/ipack/devices/Makefile b/drivers/staging/ipack/devices/Makefile
new file mode 100644
index 0000000..6de18bd
--- /dev/null
+++ b/drivers/staging/ipack/devices/Makefile
@@ -0,0 +1 @@
+obj-$(CONFIG_SERIAL_IPOCTAL) += ipoctal.o
diff --git a/drivers/staging/ipack/devices/ipoctal.c b/drivers/staging/ipack/devices/ipoctal.c
new file mode 100644
index 0000000..ed0272c
--- /dev/null
+++ b/drivers/staging/ipack/devices/ipoctal.c
@@ -0,0 +1,871 @@
+/**
+ * ipoctal.c
+ *
+ * driver for the GE IP-OCTAL boards
+ * Copyright (c) 2009 Nicolas Serafini, EIC2 SA
+ * Copyright (c) 2010,2011 Samuel Iglesias Gonsalvez <[email protected]>, CERN
+ * Copyright (c) 2012 Samuel Iglesias Gonsalvez <[email protected]>, Igalia
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the Free
+ * Software Foundation; either version 2 of the License, or (at your option)
+ * any later version.
+ */
+
+#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
+
+#include <linux/device.h>
+#include <linux/module.h>
+#include <linux/moduleparam.h>
+#include <linux/interrupt.h>
+#include <linux/fs.h>
+#include <linux/delay.h>
+#include <linux/sched.h>
+#include <linux/tty.h>
+#include <linux/serial.h>
+#include <linux/tty_flip.h>
+#include <linux/slab.h>
+#include <linux/uaccess.h>
+#include <linux/atomic.h>
+#include "../ipack.h"
+#include "ipoctal.h"
+#include "scc2698.h"
+
+#define IP_OCTAL_MANUFACTURER_ID 0xF0
+#define IP_OCTAL_232_ID 0x22
+#define IP_OCTAL_422_ID 0x2A
+#define IP_OCTAL_485_ID 0x48
+
+#define IP_OCTAL_ID_SPACE_VECTOR 0x41
+#define IP_OCTAL_NB_BLOCKS 4
+
+static struct ipack_driver driver;
+static const struct tty_operations ipoctal_fops;
+
+struct ipoctal {
+ struct list_head list;
+ struct ipack_device *dev;
+ unsigned int board_id;
+ struct scc2698_channel *chan_regs;
+ struct scc2698_block *block_regs;
+ struct ipoctal_stats chan_stats[NR_CHANNELS];
+ char *buffer[NR_CHANNELS];
+ unsigned int nb_bytes[NR_CHANNELS];
+ unsigned int count_wr[NR_CHANNELS];
+ struct ipoctal_config chan_config[NR_CHANNELS];
+ wait_queue_head_t queue[NR_CHANNELS];
+ unsigned short error_flag[NR_CHANNELS];
+ spinlock_t lock[NR_CHANNELS];
+ unsigned int pointer_read[NR_CHANNELS];
+ unsigned int pointer_write[NR_CHANNELS];
+ atomic_t open[NR_CHANNELS];
+ unsigned char write;
+ struct tty_port tty_port[NR_CHANNELS];
+ struct tty_driver *tty_drv;
+};
+
+/* Linked list to save the registered devices */
+static LIST_HEAD(ipoctal_list);
+
+inline void ipoctal_write_io_reg(struct ipoctal *ipoctal, unsigned char *dest, unsigned char value)
+{
+ unsigned long offset;
+
+ offset = ((void *) dest) - ipoctal->dev->io_space.address;
+ ipoctal->dev->ops->write8(ipoctal->dev, IPACK_IO_SPACE, offset, value);
+}
+
+inline void ipoctal_write_cr_cmd(struct ipoctal *ipoctal, unsigned char *dest, unsigned char value)
+{
+ ipoctal_write_io_reg(ipoctal, dest, value);
+}
+
+inline unsigned char ipoctal_read_io_reg(struct ipoctal *ipoctal, unsigned char *src)
+{
+ unsigned long offset;
+ unsigned char value;
+
+ offset = ((void *) src) - ipoctal->dev->io_space.address;
+ ipoctal->dev->ops->read8(ipoctal->dev, IPACK_IO_SPACE, offset, &value);
+ return value;
+}
+
+struct ipoctal *ipoctal_find_board(struct tty_struct *tty)
+{
+ struct ipoctal *p;
+
+ list_for_each_entry(p, &ipoctal_list, list) {
+ if (tty->driver->major == p->tty_drv->major)
+ return p;
+ }
+
+ return NULL;
+}
+
+static int ipoctal_port_activate(struct tty_port *port, struct tty_struct *tty)
+{
+ struct ipoctal *ipoctal;
+ int channel = tty->index;
+
+ ipoctal = ipoctal_find_board(tty);
+
+ if (ipoctal == NULL) {
+ pr_err("Device not found. Major %d\n", tty->driver->major);
+ return -ENODEV;
+ }
+
+ ipoctal_write_io_reg(ipoctal, &ipoctal->chan_regs[channel].u.w.cr,
+ CR_ENABLE_RX);
+ tty->driver_data = ipoctal;
+
+ return 0;
+}
+
+int ipoctal_open(struct tty_struct *tty, struct file *file)
+{
+ int channel = tty->index;
+ int res;
+ struct ipoctal *ipoctal;
+
+ ipoctal = ipoctal_find_board(tty);
+
+ if (ipoctal == NULL) {
+ pr_err("Device not found. Major %d\n", tty->driver->major);
+ return -ENODEV;
+ }
+
+ if (atomic_read(&ipoctal->open[channel]))
+ return -EBUSY;
+
+ res = tty_port_open(&ipoctal->tty_port[channel], tty, file);
+ if (res)
+ return res;
+
+ atomic_inc(&ipoctal->open[channel]);
+ return 0;
+}
+
+static void ipoctal_reset_stats(struct ipoctal_stats *stats)
+{
+ stats->tx = 0;
+ stats->rx = 0;
+ stats->rcv_break = 0;
+ stats->framing_err = 0;
+ stats->overrun_err = 0;
+ stats->parity_err = 0;
+}
+
+static void ipoctal_free_channel(struct tty_struct *tty)
+{
+ int channel = tty->index;
+ struct ipoctal *ipoctal = tty->driver_data;
+
+ if (ipoctal == NULL)
+ return;
+
+ ipoctal_reset_stats(&ipoctal->chan_stats[channel]);
+ ipoctal->pointer_read[channel] = 0;
+ ipoctal->pointer_write[channel] = 0;
+ ipoctal->nb_bytes[channel] = 0;
+}
+
+void ipoctal_close(struct tty_struct *tty, struct file *filp)
+{
+ int channel = tty->index;
+ struct ipoctal *ipoctal = tty->driver_data;
+
+ tty_port_close(&ipoctal->tty_port[channel], tty, filp);
+
+ if (atomic_dec_and_test(&ipoctal->open[channel]))
+ ipoctal_free_channel(tty);
+}
+
+static int ipoctal_get_icount(struct tty_struct *tty, struct serial_icounter_struct *icount)
+{
+ struct ipoctal *ipoctal = tty->driver_data;
+ int channel = tty->index;
+
+ icount->cts = 0;
+ icount->dsr = 0;
+ icount->rng = 0;
+ icount->dcd = 0;
+ icount->rx = ipoctal->chan_stats[channel].rx;
+ icount->tx = ipoctal->chan_stats[channel].tx;
+ icount->frame = ipoctal->chan_stats[channel].framing_err;
+ icount->parity = ipoctal->chan_stats[channel].parity_err;
+ icount->brk = ipoctal->chan_stats[channel].rcv_break;
+ return 0;
+}
+
+static int ipoctal_irq_handler(void *arg)
+{
+ unsigned int channel;
+ unsigned int block;
+ unsigned char isr;
+ unsigned char sr;
+ unsigned char isr_tx_rdy, isr_rx_rdy;
+ unsigned char value;
+ unsigned char flag;
+ struct tty_struct *tty;
+ struct ipoctal *ipoctal = (struct ipoctal *) arg;
+
+ /* Check all channels */
+ for (channel = 0; channel < NR_CHANNELS; channel++) {
+
+ /* If there is no client, skip the check */
+ if (!atomic_read(&ipoctal->open[channel]))
+ continue;
+
+ tty = tty_port_tty_get(&ipoctal->tty_port[channel]);
+ if (!tty)
+ continue;
+
+ /*
+ * The HW is organized in pair of channels.
+ * See which register we need to read from
+ */
+ block = channel / 2;
+ isr = ipoctal_read_io_reg(ipoctal, &ipoctal->block_regs[block].u.r.isr);
+ sr = ipoctal_read_io_reg(ipoctal, &ipoctal->chan_regs[channel].u.r.sr);
+
+ if ((channel % 2) == 1) {
+ isr_tx_rdy = isr & ISR_TxRDY_B;
+ isr_rx_rdy = isr & ISR_RxRDY_FFULL_B;
+ } else {
+ isr_tx_rdy = isr & ISR_TxRDY_A;
+ isr_rx_rdy = isr & ISR_RxRDY_FFULL_A;
+ }
+
+ /* In case of RS-485, change from TX to RX when finishing TX. Half-duplex. */
+ if ((ipoctal->board_id == IP_OCTAL_485_ID) &&
+ (sr & SR_TX_EMPTY) && (ipoctal->nb_bytes[channel] == 0)) {
+ ipoctal_write_io_reg(ipoctal,
+ &ipoctal->chan_regs[channel].u.w.cr,
+ CR_DISABLE_TX);
+ ipoctal_write_cr_cmd(ipoctal,
+ &ipoctal->chan_regs[channel].u.w.cr,
+ CR_CMD_NEGATE_RTSN);
+ ipoctal_write_io_reg(ipoctal,
+ &ipoctal->chan_regs[channel].u.w.cr,
+ CR_ENABLE_RX);
+ ipoctal->write = 1;
+ wake_up_interruptible(&ipoctal->queue[channel]);
+ }
+
+ /* RX data */
+ if (isr_rx_rdy && (sr & SR_RX_READY)) {
+ value = ipoctal_read_io_reg(ipoctal, &ipoctal->chan_regs[channel].u.r.rhr);
+ flag = TTY_NORMAL;
+
+ /* Error: count statistics */
+ if (sr & SR_ERROR) {
+ ipoctal_write_cr_cmd(ipoctal,
+ &ipoctal->chan_regs[channel].u.w.cr,
+ CR_CMD_RESET_ERR_STATUS);
+
+ if (sr & SR_OVERRUN_ERROR) {
+ ipoctal->error_flag[channel] |= UART_OVERRUN;
+ ipoctal->chan_stats[channel].overrun_err++;
+ /* Overrun doesn't affect the current character*/
+ tty_insert_flip_char(tty, 0, TTY_OVERRUN);
+ }
+ if (sr & SR_PARITY_ERROR) {
+ ipoctal->error_flag[channel] |= UART_PARITY;
+ ipoctal->chan_stats[channel].parity_err++;
+ flag = TTY_PARITY;
+ }
+ if (sr & SR_FRAMING_ERROR) {
+ ipoctal->error_flag[channel] |= UART_FRAMING;
+ ipoctal->chan_stats[channel].framing_err++;
+ flag = TTY_FRAME;
+ }
+ if (sr & SR_RECEIVED_BREAK) {
+ ipoctal->error_flag[channel] |= UART_BREAK;
+ ipoctal->chan_stats[channel].rcv_break++;
+ flag = TTY_BREAK;
+ }
+ }
+
+ tty_insert_flip_char(tty, value, flag);
+ }
+
+ /* TX of each character */
+ if (isr_tx_rdy && (sr & SR_TX_READY)) {
+ unsigned int *pointer_write = &ipoctal->pointer_write[channel];
+
+ if (ipoctal->nb_bytes[channel] <= 0) {
+ ipoctal->nb_bytes[channel] = 0;
+ continue;
+ }
+ spin_lock(&ipoctal->lock[channel]);
+ value = ipoctal->buffer[channel][*pointer_write];
+ ipoctal_write_io_reg(ipoctal, &ipoctal->chan_regs[channel].u.w.thr, value);
+ ipoctal->chan_stats[channel].tx++;
+ ipoctal->count_wr[channel]++;
+ (*pointer_write)++;
+ *pointer_write = *pointer_write % PAGE_SIZE;
+ ipoctal->nb_bytes[channel]--;
+ spin_unlock(&ipoctal->lock[channel]);
+
+ if ((ipoctal->nb_bytes[channel] == 0) &&
+ (waitqueue_active(&ipoctal->queue[channel]))) {
+
+ if (ipoctal->board_id != IP_OCTAL_485_ID) {
+ ipoctal->write = 1;
+ wake_up_interruptible(&ipoctal->queue[channel]);
+ }
+ }
+ }
+
+ tty_flip_buffer_push(tty);
+ tty_kref_put(tty);
+ }
+ return IRQ_HANDLED;
+}
+
+static int ipoctal_check_model(struct ipack_device *dev, unsigned char *id)
+{
+ unsigned char manufacturerID;
+ unsigned char board_id;
+
+ dev->ops->read8(dev,
+ IPACK_ID_SPACE,
+ IPACK_IDPROM_OFFSET_MANUFACTURER_ID,
+ &manufacturerID);
+ if (manufacturerID != IP_OCTAL_MANUFACTURER_ID)
+ return -ENODEV;
+
+ dev->ops->read8(dev,
+ IPACK_ID_SPACE,
+ IPACK_IDPROM_OFFSET_MODEL,
+ (unsigned char *)&board_id);
+
+ switch (board_id) {
+ case IP_OCTAL_232_ID:
+ case IP_OCTAL_422_ID:
+ case IP_OCTAL_485_ID:
+ *id = board_id;
+ break;
+ default:
+ return -ENODEV;
+ }
+
+ return 0;
+}
+
+static const struct tty_port_operations ipoctal_tty_port_ops = {
+ .dtr_rts = NULL,
+ .activate = ipoctal_port_activate,
+};
+
+static int ipoctal_inst_slot(struct ipoctal *ipoctal, unsigned int bus_nr, unsigned int slot, unsigned int vector)
+{
+ int res = 0;
+ int i;
+ struct tty_driver *tty;
+ char name[20];
+ unsigned char board_id;
+
+ res = ipoctal->dev->ops->map_space(ipoctal->dev, 0, IPACK_ID_SPACE);
+ if (res) {
+ pr_err("Unable to map slot [%d:%d] ID space!\n", bus_nr, slot);
+ return res;
+ }
+
+ res = ipoctal_check_model(ipoctal->dev, &board_id);
+ if (res) {
+ ipoctal->dev->ops->unmap_space(ipoctal->dev, IPACK_ID_SPACE);
+ goto out_unregister_id_space;
+ }
+ ipoctal->board_id = board_id;
+
+ res = ipoctal->dev->ops->map_space(ipoctal->dev, 0, IPACK_IO_SPACE);
+ if (res) {
+ pr_err("Unable to map slot [%d:%d] IO space!\n", bus_nr, slot);
+ goto out_unregister_id_space;
+ }
+
+ res = ipoctal->dev->ops->map_space(ipoctal->dev, 0x8000, IPACK_MEM_SPACE);
+ if (res) {
+ pr_err("Unable to map slot [%d:%d] MEM space!\n", bus_nr, slot);
+ goto out_unregister_io_space;
+ }
+
+ /* Save the virtual address to access the registers easily */
+ ipoctal->chan_regs = (struct scc2698_channel *) ipoctal->dev->io_space.address;
+ ipoctal->block_regs = (struct scc2698_block *) ipoctal->dev->io_space.address;
+
+ /* Disable RX and TX before touching anything */
+ for (i = 0; i < NR_CHANNELS ; i++) {
+ ipoctal_write_io_reg(ipoctal, &ipoctal->chan_regs[i].u.w.cr,
+ CR_DISABLE_RX | CR_DISABLE_TX);
+ }
+
+ for (i = 0; i < IP_OCTAL_NB_BLOCKS; i++) {
+ ipoctal_write_io_reg(ipoctal, &ipoctal->block_regs[i].u.w.acr, ACR_BRG_SET2);
+ ipoctal_write_io_reg(
+ ipoctal,
+ &ipoctal->block_regs[i].u.w.opcr,
+ OPCR_MPP_OUTPUT | OPCR_MPOa_RTSN | OPCR_MPOb_RTSN);
+ ipoctal_write_io_reg(
+ ipoctal,
+ &ipoctal->block_regs[i].u.w.imr,
+ IMR_TxRDY_A | IMR_RxRDY_FFULL_A | IMR_DELTA_BREAK_A |
+ IMR_TxRDY_B | IMR_RxRDY_FFULL_B | IMR_DELTA_BREAK_B);
+ }
+
+ /*
+ * IP-OCTAL has different addresses to copy its IRQ vector.
+ * Depending of the carrier these addresses are accesible or not.
+ * More info in the datasheet.
+ */
+ ipoctal->dev->ops->request_irq(ipoctal->dev,
+ vector,
+ ipoctal_irq_handler,
+ ipoctal);
+ ipoctal->dev->ops->write8(ipoctal->dev, IPACK_ID_SPACE, 0, vector);
+
+ /* Register the TTY device */
+
+ /* Each IP-OCTAL channel is a TTY port */
+ tty = alloc_tty_driver(NR_CHANNELS);
+
+ if (!tty) {
+ res = -ENOMEM;
+ goto out_unregister_slot_unmap;
+ }
+
+ /* Fill struct tty_driver with ipoctal data */
+ tty->owner = THIS_MODULE;
+ tty->driver_name = "ipoctal";
+ sprintf(name, "ipoctal.%d.%d.", bus_nr, slot);
+ tty->name = name;
+ tty->major = 0;
+
+ tty->minor_start = 0;
+ tty->type = TTY_DRIVER_TYPE_SERIAL;
+ tty->subtype = SERIAL_TYPE_NORMAL;
+ tty->flags = TTY_DRIVER_REAL_RAW | TTY_DRIVER_DYNAMIC_DEV;
+ tty->init_termios = tty_std_termios;
+ tty->init_termios.c_cflag = B9600 | CS8 | CREAD | HUPCL | CLOCAL;
+ tty->init_termios.c_ispeed = 9600;
+ tty->init_termios.c_ospeed = 9600;
+
+ tty_set_operations(tty, &ipoctal_fops);
+ res = tty_register_driver(tty);
+ if (res) {
+ pr_err("Can't register tty driver.\n");
+ put_tty_driver(tty);
+ goto out_unregister_slot_unmap;
+ }
+
+ /* Save struct tty_driver for use it when uninstalling the device */
+ ipoctal->tty_drv = tty;
+
+ for (i = 0; i < NR_CHANNELS; i++) {
+ tty_port_init(&ipoctal->tty_port[i]);
+ tty_port_alloc_xmit_buf(&ipoctal->tty_port[i]);
+ ipoctal->tty_port[i].ops = &ipoctal_tty_port_ops;
+
+ ipoctal_reset_stats(&ipoctal->chan_stats[i]);
+ ipoctal->nb_bytes[i] = 0;
+ init_waitqueue_head(&ipoctal->queue[i]);
+ ipoctal->error_flag[i] = UART_NOERROR;
+
+ spin_lock_init(&ipoctal->lock[i]);
+ ipoctal->pointer_read[i] = 0;
+ ipoctal->pointer_write[i] = 0;
+ ipoctal->nb_bytes[i] = 0;
+ tty_register_device(tty, i, NULL);
+ /* Enable again the RX. TX will be enabled when there is something to send */
+ ipoctal_write_io_reg(ipoctal, &ipoctal->chan_regs[i].u.w.cr,
+ CR_ENABLE_RX);
+ }
+
+ return 0;
+
+out_unregister_slot_unmap:
+ ipoctal->dev->ops->unmap_space(ipoctal->dev, IPACK_ID_SPACE);
+out_unregister_io_space:
+ ipoctal->dev->ops->unmap_space(ipoctal->dev, IPACK_IO_SPACE);
+out_unregister_id_space:
+ ipoctal->dev->ops->unmap_space(ipoctal->dev, IPACK_MEM_SPACE);
+ return res;
+}
+
+static inline int ipoctal_copy_write_buffer(struct ipoctal *ipoctal, unsigned int channel, const unsigned char *buf, int count)
+{
+ unsigned long flags;
+ int i;
+ unsigned int *pointer_read = &ipoctal->pointer_read[channel];
+
+ /* Copy the bytes from the user buffer to the internal one */
+ for (i = 0; i < count; i++) {
+ if (i <= (PAGE_SIZE - ipoctal->nb_bytes[channel])) {
+ spin_lock_irqsave(&ipoctal->lock[channel], flags);
+ ipoctal->tty_port[channel].xmit_buf[*pointer_read] = buf[i];
+ *pointer_read = (*pointer_read + 1) % PAGE_SIZE;
+ ipoctal->nb_bytes[channel]++;
+ spin_unlock_irqrestore(&ipoctal->lock[channel], flags);
+ } else {
+ break;
+ }
+ }
+ return i;
+}
+
+static int ipoctal_write(struct ipoctal *ipoctal, unsigned int channel, const unsigned char *buf, int count)
+{
+ ipoctal->nb_bytes[channel] = 0;
+ ipoctal->count_wr[channel] = 0;
+
+ ipoctal_copy_write_buffer(ipoctal, channel, buf, count);
+
+ ipoctal->error_flag[channel] = UART_NOERROR;
+
+ /* As the IP-OCTAL 485 only supports half duplex, do it manually */
+ if (ipoctal->board_id == IP_OCTAL_485_ID) {
+ ipoctal_write_io_reg(ipoctal,
+ &ipoctal->chan_regs[channel].u.w.cr,
+ CR_DISABLE_RX);
+ ipoctal_write_cr_cmd(ipoctal,
+ &ipoctal->chan_regs[channel].u.w.cr,
+ CR_CMD_ASSERT_RTSN);
+ }
+
+ /*
+ * Send a packet and then disable TX to avoid failure after several send
+ * operations
+ */
+ ipoctal_write_io_reg(ipoctal,
+ &ipoctal->chan_regs[channel].u.w.cr,
+ CR_ENABLE_TX);
+ wait_event_interruptible(ipoctal->queue[channel], ipoctal->write);
+ ipoctal_write_io_reg(ipoctal,
+ &ipoctal->chan_regs[channel].u.w.cr,
+ CR_DISABLE_TX);
+
+ ipoctal->write = 0;
+ return ipoctal->count_wr[channel];
+}
+
+static int ipoctal_write_tty(struct tty_struct *tty, const unsigned char *buf, int count)
+{
+ unsigned int channel = tty->index;
+ struct ipoctal *ipoctal = tty->driver_data;
+
+ return ipoctal_write(ipoctal, channel, buf, count);
+}
+
+int ipoctal_write_room(struct tty_struct *tty)
+{
+ int channel = tty->index;
+ struct ipoctal *ipoctal = tty->driver_data;
+
+ return PAGE_SIZE - ipoctal->nb_bytes[channel];
+}
+
+int ipoctal_chars_in_buffer(struct tty_struct *tty)
+{
+ int channel = tty->index;
+ struct ipoctal *ipoctal = tty->driver_data;
+
+ return ipoctal->nb_bytes[channel];
+}
+
+void ipoctal_set_termios(struct tty_struct *tty, struct ktermios *old_termios)
+{
+ unsigned int cflag;
+ unsigned char mr1 = 0;
+ unsigned char mr2 = 0;
+ unsigned char csr = 0;
+ unsigned int channel = tty->index;
+ struct ipoctal *ipoctal = tty->driver_data;
+ speed_t baud;
+
+ cflag = tty->termios->c_cflag;
+
+ /* Disable and reset everything before change the setup */
+ ipoctal_write_io_reg(ipoctal, &ipoctal->chan_regs[channel].u.w.cr,
+ CR_DISABLE_RX | CR_DISABLE_TX);
+ ipoctal_write_cr_cmd(ipoctal, &ipoctal->chan_regs[channel].u.w.cr,
+ CR_CMD_RESET_RX);
+ ipoctal_write_cr_cmd(ipoctal, &ipoctal->chan_regs[channel].u.w.cr,
+ CR_CMD_RESET_TX);
+ ipoctal_write_cr_cmd(ipoctal, &ipoctal->chan_regs[channel].u.w.cr,
+ CR_CMD_RESET_ERR_STATUS);
+ ipoctal_write_cr_cmd(ipoctal, &ipoctal->chan_regs[channel].u.w.cr,
+ CR_CMD_RESET_MR);
+
+ /* Set Bits per chars */
+ switch (cflag & CSIZE) {
+ case CS6:
+ mr1 |= MR1_CHRL_6_BITS;
+ break;
+ case CS7:
+ mr1 |= MR1_CHRL_7_BITS;
+ break;
+ case CS8:
+ default:
+ mr1 |= MR1_CHRL_8_BITS;
+ /* By default, select CS8 */
+ tty->termios->c_cflag = (cflag & ~CSIZE) | CS8;
+ break;
+ }
+
+ /* Set Parity */
+ if (cflag & PARENB)
+ if (cflag & PARODD)
+ mr1 |= MR1_PARITY_ON | MR1_PARITY_ODD;
+ else
+ mr1 |= MR1_PARITY_ON | MR1_PARITY_EVEN;
+ else
+ mr1 |= MR1_PARITY_OFF;
+
+ /* Mark or space parity is not supported */
+ tty->termios->c_cflag &= ~CMSPAR;
+
+ /* Set stop bits */
+ if (cflag & CSTOPB)
+ mr2 |= MR2_STOP_BITS_LENGTH_2;
+ else
+ mr2 |= MR2_STOP_BITS_LENGTH_1;
+
+ /* Set the flow control */
+ switch (ipoctal->board_id) {
+ case IP_OCTAL_232_ID:
+ if (cflag & CRTSCTS) {
+ mr1 |= MR1_RxRTS_CONTROL_ON;
+ mr2 |= MR2_TxRTS_CONTROL_OFF | MR2_CTS_ENABLE_TX_ON;
+ ipoctal->chan_config[channel].flow_control = 1;
+ } else {
+ mr1 |= MR1_RxRTS_CONTROL_OFF;
+ mr2 |= MR2_TxRTS_CONTROL_OFF | MR2_CTS_ENABLE_TX_OFF;
+ ipoctal->chan_config[channel].flow_control = 0;
+ }
+ break;
+ case IP_OCTAL_422_ID:
+ mr1 |= MR1_RxRTS_CONTROL_OFF;
+ mr2 |= MR2_TxRTS_CONTROL_OFF | MR2_CTS_ENABLE_TX_OFF;
+ ipoctal->chan_config[channel].flow_control = 0;
+ break;
+ case IP_OCTAL_485_ID:
+ mr1 |= MR1_RxRTS_CONTROL_OFF;
+ mr2 |= MR2_TxRTS_CONTROL_ON | MR2_CTS_ENABLE_TX_OFF;
+ ipoctal->chan_config[channel].flow_control = 0;
+ break;
+ default:
+ return;
+ break;
+ }
+
+ baud = tty_get_baud_rate(tty);
+ tty_termios_encode_baud_rate(tty->termios, baud, baud);
+
+ /* Set baud rate */
+ switch (tty->termios->c_ospeed) {
+ case 75:
+ csr |= TX_CLK_75 | RX_CLK_75;
+ break;
+ case 110:
+ csr |= TX_CLK_110 | RX_CLK_110;
+ break;
+ case 150:
+ csr |= TX_CLK_150 | RX_CLK_150;
+ break;
+ case 300:
+ csr |= TX_CLK_300 | RX_CLK_300;
+ break;
+ case 600:
+ csr |= TX_CLK_600 | RX_CLK_600;
+ break;
+ case 1200:
+ csr |= TX_CLK_1200 | RX_CLK_1200;
+ break;
+ case 1800:
+ csr |= TX_CLK_1800 | RX_CLK_1800;
+ break;
+ case 2000:
+ csr |= TX_CLK_2000 | RX_CLK_2000;
+ break;
+ case 2400:
+ csr |= TX_CLK_2400 | RX_CLK_2400;
+ break;
+ case 4800:
+ csr |= TX_CLK_4800 | RX_CLK_4800;
+ break;
+ case 9600:
+ csr |= TX_CLK_9600 | RX_CLK_9600;
+ break;
+ case 19200:
+ csr |= TX_CLK_19200 | RX_CLK_19200;
+ break;
+ case 38400:
+ default:
+ csr |= TX_CLK_38400 | RX_CLK_38400;
+ /* In case of default, we establish 38400 bps */
+ tty_termios_encode_baud_rate(tty->termios, 38400, 38400);
+ break;
+ }
+
+ mr1 |= MR1_ERROR_CHAR;
+ mr1 |= MR1_RxINT_RxRDY;
+
+ /* Write the control registers */
+ ipoctal_write_io_reg(ipoctal, &ipoctal->chan_regs[channel].u.w.mr, mr1);
+ ipoctal_write_io_reg(ipoctal, &ipoctal->chan_regs[channel].u.w.mr, mr2);
+ ipoctal_write_io_reg(ipoctal, &ipoctal->chan_regs[channel].u.w.csr, csr);
+
+ /* save the setup in the structure */
+ ipoctal->chan_config[channel].baud = tty_get_baud_rate(tty);
+ ipoctal->chan_config[channel].bits_per_char = cflag & CSIZE;
+ ipoctal->chan_config[channel].parity = cflag & PARENB;
+ ipoctal->chan_config[channel].stop_bits = cflag & CSTOPB;
+
+ /* Enable again the RX */
+ ipoctal_write_io_reg(ipoctal, &ipoctal->chan_regs[channel].u.w.cr,
+ CR_ENABLE_RX);
+}
+
+static void ipoctal_hangup(struct tty_struct *tty)
+{
+ unsigned long flags;
+ int channel = tty->index;
+ struct ipoctal *ipoctal = tty->driver_data;
+
+ if (ipoctal == NULL)
+ return;
+
+ spin_lock_irqsave(&ipoctal->lock[channel], flags);
+ ipoctal->nb_bytes[channel] = 0;
+ ipoctal->pointer_read[channel] = 0;
+ ipoctal->pointer_write[channel] = 0;
+ spin_unlock_irqrestore(&ipoctal->lock[channel], flags);
+
+ tty_port_hangup(&ipoctal->tty_port[channel]);
+
+ ipoctal_write_io_reg(ipoctal, &ipoctal->chan_regs[channel].u.w.cr,
+ CR_DISABLE_RX | CR_DISABLE_TX);
+ ipoctal_write_cr_cmd(ipoctal, &ipoctal->chan_regs[channel].u.w.cr,
+ CR_CMD_RESET_RX);
+ ipoctal_write_cr_cmd(ipoctal, &ipoctal->chan_regs[channel].u.w.cr,
+ CR_CMD_RESET_TX);
+ ipoctal_write_cr_cmd(ipoctal, &ipoctal->chan_regs[channel].u.w.cr,
+ CR_CMD_RESET_ERR_STATUS);
+ ipoctal_write_cr_cmd(ipoctal, &ipoctal->chan_regs[channel].u.w.cr,
+ CR_CMD_RESET_MR);
+
+ clear_bit(ASYNCB_INITIALIZED, &ipoctal->tty_port[channel].flags);
+ wake_up_interruptible(&ipoctal->tty_port[channel].open_wait);
+}
+
+static const struct tty_operations ipoctal_fops = {
+ .ioctl = NULL,
+ .open = ipoctal_open,
+ .close = ipoctal_close,
+ .write = ipoctal_write_tty,
+ .set_termios = ipoctal_set_termios,
+ .write_room = ipoctal_write_room,
+ .chars_in_buffer = ipoctal_chars_in_buffer,
+ .get_icount = ipoctal_get_icount,
+ .hangup = ipoctal_hangup,
+};
+
+int ipoctal_match(struct ipack_device *dev)
+{
+ int res;
+ unsigned char board_id;
+
+ res = dev->ops->map_space(dev, 0, IPACK_ID_SPACE);
+ if (res)
+ return res;
+
+ res = ipoctal_check_model(dev, &board_id);
+ dev->ops->unmap_space(dev, IPACK_ID_SPACE);
+ return res;
+}
+
+int ipoctal_probe(struct ipack_device *dev)
+{
+ int res;
+ struct ipoctal *ipoctal;
+
+ ipoctal = kzalloc(sizeof(struct ipoctal), GFP_KERNEL);
+ if (ipoctal == NULL)
+ return -ENOMEM;
+
+ ipoctal->dev = dev;
+ res = ipoctal_inst_slot(ipoctal,
+ dev->bus_nr,
+ dev->slot,
+ dev->irq);
+ if (res)
+ goto out_uninst;
+
+ list_add_tail(&ipoctal->list, &ipoctal_list);
+ return 0;
+
+out_uninst:
+ kfree(ipoctal);
+ return res;
+}
+
+static void __ipoctal_remove(struct ipoctal *ipoctal)
+{
+ int i;
+
+ for (i = 0; i < NR_CHANNELS; i++) {
+ tty_unregister_device(ipoctal->tty_drv, i);
+ tty_port_free_xmit_buf(&ipoctal->tty_port[i]);
+ }
+
+ tty_unregister_driver(ipoctal->tty_drv);
+ put_tty_driver(ipoctal->tty_drv);
+
+ /* Tell the carrier board to free all the resources for this device */
+ ipoctal->dev->ops->remove_device(ipoctal->dev);
+
+ list_del(&ipoctal->list);
+ kfree(ipoctal);
+}
+
+void ipoctal_remove(struct ipack_device *device)
+{
+ struct ipoctal *ipoctal, *next;
+
+ list_for_each_entry_safe(ipoctal, next, &ipoctal_list, list) {
+ if (ipoctal->dev == device)
+ __ipoctal_remove(ipoctal);
+ }
+}
+
+struct ipack_driver_ops ipoctal_drv_ops = {
+ .match = ipoctal_match,
+ .probe = ipoctal_probe,
+ .remove = ipoctal_remove,
+};
+
+static int __init ipoctal_init(void)
+{
+ driver.owner = THIS_MODULE;
+ driver.ops = &ipoctal_drv_ops;
+ driver.driver.name = KBUILD_MODNAME;
+ ipack_driver_register(&driver);
+ return 0;
+}
+
+static void __exit ipoctal_exit(void)
+{
+ struct ipoctal *p, *next;
+
+ list_for_each_entry_safe(p, next, &ipoctal_list, list)
+ __ipoctal_remove(p);
+
+ ipack_driver_unregister(&driver);
+}
+
+MODULE_DESCRIPTION("IP-Octal 232, 422 and 485 device driver");
+MODULE_LICENSE("GPL");
+
+module_init(ipoctal_init);
+module_exit(ipoctal_exit);
diff --git a/drivers/staging/ipack/devices/ipoctal.h b/drivers/staging/ipack/devices/ipoctal.h
new file mode 100644
index 0000000..7c5d211
--- /dev/null
+++ b/drivers/staging/ipack/devices/ipoctal.h
@@ -0,0 +1,81 @@
+/**
+ * ipoctal.h
+ *
+ * driver for the IPOCTAL boards
+ * Copyright (c) 2009 Nicolas Serafini, EIC2 SA
+ * Copyright (c) 2010,2011 Samuel Iglesias Gonsalvez <[email protected]>, CERN
+ * Copyright (c) 2012 Samuel Iglesias Gonsalvez <[email protected]>, Igalia
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the Free
+ * Software Foundation; either version 2 of the License, or (at your option)
+ * any later version.
+ */
+
+#ifndef _IPOCTAL_H
+#define _IPOCTAL_H_
+
+#define NR_CHANNELS 8
+#define IPOCTAL_MAX_BOARDS 16
+#define MAX_DEVICES (NR_CHANNELS * IPOCTAL_MAX_BOARDS)
+#define RELEVANT_IFLAG(iflag) ((iflag) & (IGNBRK|BRKINT|IGNPAR|PARMRK|INPCK))
+
+/**
+ * enum uart_parity_e - UART supported parity.
+ */
+enum uart_parity_e {
+ UART_NONE = 0,
+ UART_ODD = 1,
+ UART_EVEN = 2,
+};
+
+/**
+ * enum uart_error - UART error type
+ *
+ */
+enum uart_error {
+ UART_NOERROR = 0, /* No error during transmission */
+ UART_TIMEOUT = 1 << 0, /* Timeout error */
+ UART_OVERRUN = 1 << 1, /* Overrun error */
+ UART_PARITY = 1 << 2, /* Parity error */
+ UART_FRAMING = 1 << 3, /* Framing error */
+ UART_BREAK = 1 << 4, /* Received break */
+};
+
+/**
+ * struct ipoctal_config - Serial configuration
+ *
+ * @baud: Baud rate
+ * @stop_bits: Stop bits (1 or 2)
+ * @bits_per_char: data size in bits
+ * @parity
+ * @flow_control: Flow control management (RTS/CTS) (0 disabled, 1 enabled)
+ */
+struct ipoctal_config {
+ unsigned int baud;
+ unsigned int stop_bits;
+ unsigned int bits_per_char;
+ unsigned short parity;
+ unsigned int flow_control;
+};
+
+/**
+ * struct ipoctal_stats -- Stats since last reset
+ *
+ * @tx: Number of transmitted bytes
+ * @rx: Number of received bytes
+ * @overrun: Number of overrun errors
+ * @parity_err: Number of parity errors
+ * @framing_err: Number of framing errors
+ * @rcv_break: Number of break received
+ */
+struct ipoctal_stats {
+ unsigned long tx;
+ unsigned long rx;
+ unsigned long overrun_err;
+ unsigned long parity_err;
+ unsigned long framing_err;
+ unsigned long rcv_break;
+};
+
+#endif /* _IPOCTAL_H_ */
diff --git a/drivers/staging/ipack/devices/scc2698.h b/drivers/staging/ipack/devices/scc2698.h
new file mode 100644
index 0000000..e683019
--- /dev/null
+++ b/drivers/staging/ipack/devices/scc2698.h
@@ -0,0 +1,229 @@
+/*
+ * scc2698.h
+ *
+ * driver for the IPOCTAL boards
+ * Copyright (c) 2009 Nicolas Serafini, EIC2 SA
+ * Copyright (c) 2010,2011 Samuel Iglesias Gonsalvez <[email protected]>, CERN
+ * Copyright (c) 2012 Samuel Iglesias Gonsalvez <[email protected]>, Igalia
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the Free
+ * Software Foundation; either version 2 of the License, or (at your option)
+ * any later version.
+ */
+
+#ifndef SCC2698_H_
+#define SCC2698_H_
+
+/*
+ * struct scc2698_channel - Channel access to scc2698 IO
+ *
+ * dn value are only spacer.
+ *
+ */
+struct scc2698_channel {
+ union {
+ struct {
+ unsigned char d0, mr; /* Mode register 1/2*/
+ unsigned char d1, sr; /* Status register */
+ unsigned char d2, r1; /* reserved */
+ unsigned char d3, rhr; /* Receive holding register (R) */
+ unsigned char junk[8]; /* other crap for block control */
+ } r; /* Read access */
+ struct {
+ unsigned char d0, mr; /* Mode register 1/2 */
+ unsigned char d1, csr; /* Clock select register */
+ unsigned char d2, cr; /* Command register */
+ unsigned char d3, thr; /* Transmit holding register */
+ unsigned char junk[8]; /* other crap for block control */
+ } w; /* Write access */
+ } u;
+};
+
+/*
+ * struct scc2698_block - Block access to scc2698 IO
+ *
+ * The scc2698 contain 4 block.
+ * Each block containt two channel a and b.
+ * dn value are only spacer.
+ *
+ */
+struct scc2698_block {
+ union {
+ struct {
+ unsigned char d0, mra; /* Mode register 1/2 (a) */
+ unsigned char d1, sra; /* Status register (a) */
+ unsigned char d2, r1; /* reserved */
+ unsigned char d3, rhra; /* Receive holding register (a) */
+ unsigned char d4, ipcr; /* Input port change register of block */
+ unsigned char d5, isr; /* Interrupt status register of block */
+ unsigned char d6, ctur; /* Counter timer upper register of block */
+ unsigned char d7, ctlr; /* Counter timer lower register of block */
+ unsigned char d8, mrb; /* Mode register 1/2 (b) */
+ unsigned char d9, srb; /* Status register (b) */
+ unsigned char da, r2; /* reserved */
+ unsigned char db, rhrb; /* Receive holding register (b) */
+ unsigned char dc, r3; /* reserved */
+ unsigned char dd, ip; /* Input port register of block */
+ unsigned char de, ctg; /* Start counter timer of block */
+ unsigned char df, cts; /* Stop counter timer of block */
+ } r; /* Read access */
+ struct {
+ unsigned char d0, mra; /* Mode register 1/2 (a) */
+ unsigned char d1, csra; /* Clock select register (a) */
+ unsigned char d2, cra; /* Command register (a) */
+ unsigned char d3, thra; /* Transmit holding register (a) */
+ unsigned char d4, acr; /* Auxiliary control register of block */
+ unsigned char d5, imr; /* Interrupt mask register of block */
+ unsigned char d6, ctu; /* Counter timer upper register of block */
+ unsigned char d7, ctl; /* Counter timer lower register of block */
+ unsigned char d8, mrb; /* Mode register 1/2 (b) */
+ unsigned char d9, csrb; /* Clock select register (a) */
+ unsigned char da, crb; /* Command register (b) */
+ unsigned char db, thrb; /* Transmit holding register (b) */
+ unsigned char dc, r1; /* reserved */
+ unsigned char dd, opcr; /* Output port configuration register of block */
+ unsigned char de, r2; /* reserved */
+ unsigned char df, r3; /* reserved */
+ } w; /* Write access */
+ } u;
+} ;
+
+#define MR1_CHRL_5_BITS (0x0 << 0)
+#define MR1_CHRL_6_BITS (0x1 << 0)
+#define MR1_CHRL_7_BITS (0x2 << 0)
+#define MR1_CHRL_8_BITS (0x3 << 0)
+#define MR1_PARITY_EVEN (0x1 << 2)
+#define MR1_PARITY_ODD (0x0 << 2)
+#define MR1_PARITY_ON (0x0 << 3)
+#define MR1_PARITY_FORCE (0x1 << 3)
+#define MR1_PARITY_OFF (0x2 << 3)
+#define MR1_PARITY_SPECIAL (0x3 << 3)
+#define MR1_ERROR_CHAR (0x0 << 5)
+#define MR1_ERROR_BLOCK (0x1 << 5)
+#define MR1_RxINT_RxRDY (0x0 << 6)
+#define MR1_RxINT_FFULL (0x1 << 6)
+#define MR1_RxRTS_CONTROL_ON (0x1 << 7)
+#define MR1_RxRTS_CONTROL_OFF (0x0 << 7)
+
+#define MR2_STOP_BITS_LENGTH_1 (0x7 << 0)
+#define MR2_STOP_BITS_LENGTH_2 (0xF << 0)
+#define MR2_CTS_ENABLE_TX_ON (0x1 << 4)
+#define MR2_CTS_ENABLE_TX_OFF (0x0 << 4)
+#define MR2_TxRTS_CONTROL_ON (0x1 << 5)
+#define MR2_TxRTS_CONTROL_OFF (0x0 << 5)
+#define MR2_CH_MODE_NORMAL (0x0 << 6)
+#define MR2_CH_MODE_ECHO (0x1 << 6)
+#define MR2_CH_MODE_LOCAL (0x2 << 6)
+#define MR2_CH_MODE_REMOTE (0x3 << 6)
+
+#define CR_ENABLE_RX (0x1 << 0)
+#define CR_DISABLE_RX (0x1 << 1)
+#define CR_ENABLE_TX (0x1 << 2)
+#define CR_DISABLE_TX (0x1 << 3)
+#define CR_CMD_RESET_MR (0x1 << 4)
+#define CR_CMD_RESET_RX (0x2 << 4)
+#define CR_CMD_RESET_TX (0x3 << 4)
+#define CR_CMD_RESET_ERR_STATUS (0x4 << 4)
+#define CR_CMD_RESET_BREAK_CHANGE (0x5 << 4)
+#define CR_CMD_START_BREAK (0x6 << 4)
+#define CR_CMD_STOP_BREAK (0x7 << 4)
+#define CR_CMD_ASSERT_RTSN (0x8 << 4)
+#define CR_CMD_NEGATE_RTSN (0x9 << 4)
+#define CR_CMD_SET_TIMEOUT_MODE (0xA << 4)
+#define CR_CMD_DISABLE_TIMEOUT_MODE (0xC << 4)
+
+#define SR_RX_READY (0x1 << 0)
+#define SR_FIFO_FULL (0x1 << 1)
+#define SR_TX_READY (0x1 << 2)
+#define SR_TX_EMPTY (0x1 << 3)
+#define SR_OVERRUN_ERROR (0x1 << 4)
+#define SR_PARITY_ERROR (0x1 << 5)
+#define SR_FRAMING_ERROR (0x1 << 6)
+#define SR_RECEIVED_BREAK (0x1 << 7)
+
+#define SR_ERROR (0xF0)
+
+#define ACR_DELTA_IP0_IRQ_EN (0x1 << 0)
+#define ACR_DELTA_IP1_IRQ_EN (0x1 << 1)
+#define ACR_DELTA_IP2_IRQ_EN (0x1 << 2)
+#define ACR_DELTA_IP3_IRQ_EN (0x1 << 3)
+#define ACR_CT_Mask (0x7 << 4)
+#define ACR_CExt (0x0 << 4)
+#define ACR_CTxCA (0x1 << 4)
+#define ACR_CTxCB (0x2 << 4)
+#define ACR_CClk16 (0x3 << 4)
+#define ACR_TExt (0x4 << 4)
+#define ACR_TExt16 (0x5 << 4)
+#define ACR_TClk (0x6 << 4)
+#define ACR_TClk16 (0x7 << 4)
+#define ACR_BRG_SET1 (0x0 << 7)
+#define ACR_BRG_SET2 (0x1 << 7)
+
+#define TX_CLK_75 (0x0 << 0)
+#define TX_CLK_110 (0x1 << 0)
+#define TX_CLK_38400 (0x2 << 0)
+#define TX_CLK_150 (0x3 << 0)
+#define TX_CLK_300 (0x4 << 0)
+#define TX_CLK_600 (0x5 << 0)
+#define TX_CLK_1200 (0x6 << 0)
+#define TX_CLK_2000 (0x7 << 0)
+#define TX_CLK_2400 (0x8 << 0)
+#define TX_CLK_4800 (0x9 << 0)
+#define TX_CLK_1800 (0xA << 0)
+#define TX_CLK_9600 (0xB << 0)
+#define TX_CLK_19200 (0xC << 0)
+#define RX_CLK_75 (0x0 << 4)
+#define RX_CLK_110 (0x1 << 4)
+#define RX_CLK_38400 (0x2 << 4)
+#define RX_CLK_150 (0x3 << 4)
+#define RX_CLK_300 (0x4 << 4)
+#define RX_CLK_600 (0x5 << 4)
+#define RX_CLK_1200 (0x6 << 4)
+#define RX_CLK_2000 (0x7 << 4)
+#define RX_CLK_2400 (0x8 << 4)
+#define RX_CLK_4800 (0x9 << 4)
+#define RX_CLK_1800 (0xA << 4)
+#define RX_CLK_9600 (0xB << 4)
+#define RX_CLK_19200 (0xC << 4)
+
+#define OPCR_MPOa_RTSN (0x0 << 0)
+#define OPCR_MPOa_C_TO (0x1 << 0)
+#define OPCR_MPOa_TxC1X (0x2 << 0)
+#define OPCR_MPOa_TxC16X (0x3 << 0)
+#define OPCR_MPOa_RxC1X (0x4 << 0)
+#define OPCR_MPOa_RxC16X (0x5 << 0)
+#define OPCR_MPOa_TxRDY (0x6 << 0)
+#define OPCR_MPOa_RxRDY_FF (0x7 << 0)
+
+#define OPCR_MPOb_RTSN (0x0 << 4)
+#define OPCR_MPOb_C_TO (0x1 << 4)
+#define OPCR_MPOb_TxC1X (0x2 << 4)
+#define OPCR_MPOb_TxC16X (0x3 << 4)
+#define OPCR_MPOb_RxC1X (0x4 << 4)
+#define OPCR_MPOb_RxC16X (0x5 << 4)
+#define OPCR_MPOb_TxRDY (0x6 << 4)
+#define OPCR_MPOb_RxRDY_FF (0x7 << 4)
+
+#define OPCR_MPP_INPUT (0x0 << 7)
+#define OPCR_MPP_OUTPUT (0x1 << 7)
+
+#define IMR_TxRDY_A (0x1 << 0)
+#define IMR_RxRDY_FFULL_A (0x1 << 1)
+#define IMR_DELTA_BREAK_A (0x1 << 2)
+#define IMR_COUNTER_READY (0x1 << 3)
+#define IMR_TxRDY_B (0x1 << 4)
+#define IMR_RxRDY_FFULL_B (0x1 << 5)
+#define IMR_DELTA_BREAK_B (0x1 << 6)
+#define IMR_INPUT_PORT_CHANGE (0x1 << 7)
+
+#define ISR_TxRDY_A (0x1 << 0)
+#define ISR_RxRDY_FFULL_A (0x1 << 1)
+#define ISR_DELTA_BREAK_A (0x1 << 2)
+#define ISR_COUNTER_READY (0x1 << 3)
+#define ISR_TxRDY_B (0x1 << 4)
+#define ISR_RxRDY_FFULL_B (0x1 << 5)
+#define ISR_DELTA_BREAK_B (0x1 << 6)
+#define ISR_INPUT_PORT_CHANGE (0x1 << 7)
+
+#endif /* SCC2698_H_ */
--
1.7.10
Hey Samuel,
> [snip]
>
> +#define to_ipack_dev(device) container_of(device, struct ipack_device, dev)
>
> [snip]
>
> +#define to_ipack_driver(drv) container_of(drv, struct ipack_driver, driver)
These don't need to be public as only your bus driver uses them. You can move this
into the .c file.
--
/manohar
Hey Samuel,
> +static void tpci200_uninstall(struct tpci200_board *tpci200)
> +{
> + int i;
> +
> + for (i = 0; i < TPCI200_NB_SLOT; i++) {
> + if (tpci200->slots[i].dev == NULL)
> + continue;
> + else
> + tpci200->slots[i].dev->driver->ops->remove(tpci200->slots[i].dev);
Check whether the function exists or you could have trouble :)
If you already added a check when registering to make sure this is always non-NULL then
ignore this. I would recommend wrapping this up in some function:
void tpci_slot_remove(struct tpci_slot *slot)
{
if (slot->dev->driver->ops->remove)
slot->dev->driver->ops->remove(slot->dev);
}
--
/manohar
On Tue, 2012-05-08 at 10:15 +0200, Manohar Vanga wrote:
[...]
>
> Check whether the function exists or you could have trouble :)
> If you already added a check when registering to make sure this is always non-NULL then
> ignore this. I would recommend wrapping this up in some function:
>
> void tpci_slot_remove(struct tpci_slot *slot)
> {
> if (slot->dev->driver->ops->remove)
> slot->dev->driver->ops->remove(slot->dev);
> }
>
OK, I agree that this is better and clearer.
I am fixing some minor stuff I saw (one extra newline in ipack.h,
convert to "static" some functions, etc)
I hope this will increase the code quality and readability.
Thanks a lot for your reviews,
Sam