Changes since v1:
- Rebased on top of mainline from 12250d8
- Dropped the feature removal schedule patch
- Implemented dma_request_slave_channel_compat() and
converted the mmc and spi drivers to use it
- Dropped unneeded #address-cells and #size-cells from
EDMA DT support
- Moved private EDMA header to linux/platform_data/ and
removed some unneeded definitions
- Fixed parsing of optional properties
TODO:
- Add AM33xx crossbar support to the private EDMA API
(any EDMA events on the crossbar are not supported)
- Add dmaengine support for per-channel caps so the
hack to set the maximum segments can be replaced with
a query to the dmaengine driver
This series adds DMA Engine support for AM33xx, which uses
an EDMA DMAC. The EDMA DMAC has been previously supported by only
a private API implementation (much like the situation with OMAP
DMA) found on the DaVinci family of SoCs.
The series applies on top of mainline from
12250d843e8489ee00b5b7726da855e51694e792 and the following patches:
- Vaibhav's patch to fix AM33xx boot on mainline
https://patchwork.kernel.org/patch/1569231/
- dmaengine DT support from Vinod's dmaengine_dt branch in
git://git.infradead.org/users/vkoul/slave-dma.git since
027478851791df751176398be02a3b1c5f6aa824
The approach taken is similar to how OMAP DMA is being converted to
DMA Engine support. With the functional EDMA private API already
existing in mach-davinci/dma.c, we first move that to an ARM common
area so it can be shared. Adding DT and runtime PM support to the
private EDMA API implementation allows it to run on AM33xx. AM33xx
*only* boots using DT so we leverage Jon's generic DT DMA helpers to
register EDMA DMAC with the of_dma framework and then add support
for calling the dma_request_slave_channel() API to both the mmc
and spi drivers.
What works? Well, with this series we now have MMC and SPI support
on AM33xx. The only caveat for MMC is that the mmc3 controller has
its events on the crossbar and is not usable yet.
This is tested on BeagleBone with a SPI framebuffer driver and SD
card. It is regression tested on AM180x-EVM (which also makes use
of the EDMA dmaengine driver and the EDMA private API) using SD,
SPI flash, and the onboard audio supported by the ASoC Davinci
driver.
After this series, the plan is to convert the last in-tree user
of the private EDMA API (davinci-pcm/mcasp) and then eliminate
the private EDMA API by folding its functionality into
drivers/dma/edma.c.
Matt Porter (16):
dmaengine: edma: fix slave config dependency on direction
ARM: davinci: move private EDMA API to arm/common
ARM: edma: remove unused transfer controller handlers
ARM: edma: add DT and runtime PM support for AM335x
dmaengine: edma: enable build for AM33XX
dmaengine: edma: Add TI EDMA device tree binding
ARM: dts: add AM33XX EDMA support
ARM: omap: add hsmmc am33xx specific init
dmaengine: add dma_request_slave_channel_compat()
mmc: omap_hsmmc: convert to dma_request_slave_channel_compat()
mmc: omap_hsmmc: limit max_segs with the EDMA DMAC
mmc: omap_hsmmc: add generic DMA request support to the DT binding
ARM: dts: add AM33XX MMC support
spi: omap2-mcspi: convert to dma_request_slave_channel_compat()
spi: omap2-mcspi: add generic DMA request support to the DT binding
ARM: dts: add AM33XX SPI support
Documentation/devicetree/bindings/dma/ti-edma.txt | 49 +
.../devicetree/bindings/mmc/ti-omap-hsmmc.txt | 25 +-
Documentation/devicetree/bindings/spi/omap-spi.txt | 27 +-
arch/arm/Kconfig | 1 +
arch/arm/boot/dts/am335x-bone.dts | 23 +
arch/arm/boot/dts/am33xx.dtsi | 100 ++
arch/arm/common/Kconfig | 3 +
arch/arm/common/Makefile | 1 +
arch/arm/common/edma.c | 1781 ++++++++++++++++++++
arch/arm/mach-davinci/Makefile | 2 +-
arch/arm/mach-davinci/board-da830-evm.c | 4 +-
arch/arm/mach-davinci/board-da850-evm.c | 8 +-
arch/arm/mach-davinci/board-dm646x-evm.c | 4 +-
arch/arm/mach-davinci/board-omapl138-hawk.c | 8 +-
arch/arm/mach-davinci/board-tnetv107x-evm.c | 2 +-
arch/arm/mach-davinci/davinci.h | 2 +-
arch/arm/mach-davinci/devices-da8xx.c | 8 +-
arch/arm/mach-davinci/devices-tnetv107x.c | 6 +-
arch/arm/mach-davinci/devices.c | 7 +-
arch/arm/mach-davinci/dm355.c | 6 +-
arch/arm/mach-davinci/dm365.c | 6 +-
arch/arm/mach-davinci/dm644x.c | 6 +-
arch/arm/mach-davinci/dm646x.c | 6 +-
arch/arm/mach-davinci/dma.c | 1588 -----------------
arch/arm/mach-davinci/include/mach/da8xx.h | 2 +-
arch/arm/mach-davinci/include/mach/edma.h | 267 ---
arch/arm/mach-omap2/hsmmc.c | 7 +-
arch/arm/plat-omap/Kconfig | 1 +
drivers/dma/Kconfig | 2 +-
drivers/dma/edma.c | 57 +-
drivers/mmc/host/davinci_mmc.c | 1 +
drivers/mmc/host/omap_hsmmc.c | 20 +-
drivers/spi/spi-omap2-mcspi.c | 65 +-
include/linux/dmaengine.h | 10 +
include/linux/mfd/davinci_voicecodec.h | 3 +-
include/linux/platform_data/edma.h | 198 +++
include/linux/platform_data/spi-davinci.h | 2 +-
sound/soc/davinci/davinci-evm.c | 1 +
sound/soc/davinci/davinci-pcm.c | 1 +
sound/soc/davinci/davinci-pcm.h | 2 +-
sound/soc/davinci/davinci-sffsdr.c | 6 +-
41 files changed, 2361 insertions(+), 1957 deletions(-)
create mode 100644 Documentation/devicetree/bindings/dma/ti-edma.txt
create mode 100644 arch/arm/common/edma.c
delete mode 100644 arch/arm/mach-davinci/dma.c
delete mode 100644 arch/arm/mach-davinci/include/mach/edma.h
create mode 100644 include/linux/platform_data/edma.h
--
1.7.9.5
The edma_slave_config() implementation depends on the
direction field such that it will not properly configure
a slave channel when called without direction set.
This fixes the implementation so that the slave config
is copied as is and prep_slave_sg() handles the
direction dependent handling. spi-omap2-mcspi and
omap_hsmmc both expose this bug as they configure the
slave channel config from a common path with an unconfigured
direction field.
Signed-off-by: Matt Porter <[email protected]>
---
drivers/dma/edma.c | 55 ++++++++++++++++++++++++++--------------------------
1 file changed, 27 insertions(+), 28 deletions(-)
diff --git a/drivers/dma/edma.c b/drivers/dma/edma.c
index 05aea3c..fdcf079 100644
--- a/drivers/dma/edma.c
+++ b/drivers/dma/edma.c
@@ -69,9 +69,7 @@ struct edma_chan {
int ch_num;
bool alloced;
int slot[EDMA_MAX_SLOTS];
- dma_addr_t addr;
- int addr_width;
- int maxburst;
+ struct dma_slave_config cfg;
};
struct edma_cc {
@@ -178,29 +176,14 @@ static int edma_terminate_all(struct edma_chan *echan)
return 0;
}
-
static int edma_slave_config(struct edma_chan *echan,
- struct dma_slave_config *config)
+ struct dma_slave_config *cfg)
{
- if ((config->src_addr_width > DMA_SLAVE_BUSWIDTH_4_BYTES) ||
- (config->dst_addr_width > DMA_SLAVE_BUSWIDTH_4_BYTES))
+ if (cfg->src_addr_width == DMA_SLAVE_BUSWIDTH_8_BYTES ||
+ cfg->dst_addr_width == DMA_SLAVE_BUSWIDTH_8_BYTES)
return -EINVAL;
- if (config->direction == DMA_MEM_TO_DEV) {
- if (config->dst_addr)
- echan->addr = config->dst_addr;
- if (config->dst_addr_width)
- echan->addr_width = config->dst_addr_width;
- if (config->dst_maxburst)
- echan->maxburst = config->dst_maxburst;
- } else if (config->direction == DMA_DEV_TO_MEM) {
- if (config->src_addr)
- echan->addr = config->src_addr;
- if (config->src_addr_width)
- echan->addr_width = config->src_addr_width;
- if (config->src_maxburst)
- echan->maxburst = config->src_maxburst;
- }
+ memcpy(&echan->cfg, cfg, sizeof(echan->cfg));
return 0;
}
@@ -235,6 +218,9 @@ static struct dma_async_tx_descriptor *edma_prep_slave_sg(
struct edma_chan *echan = to_edma_chan(chan);
struct device *dev = chan->device->dev;
struct edma_desc *edesc;
+ dma_addr_t dev_addr;
+ enum dma_slave_buswidth dev_width;
+ u32 burst;
struct scatterlist *sg;
int i;
int acnt, bcnt, ccnt, src, dst, cidx;
@@ -243,7 +229,20 @@ static struct dma_async_tx_descriptor *edma_prep_slave_sg(
if (unlikely(!echan || !sgl || !sg_len))
return NULL;
- if (echan->addr_width == DMA_SLAVE_BUSWIDTH_UNDEFINED) {
+ if (direction == DMA_DEV_TO_MEM) {
+ dev_addr = echan->cfg.src_addr;
+ dev_width = echan->cfg.src_addr_width;
+ burst = echan->cfg.src_maxburst;
+ } else if (direction == DMA_MEM_TO_DEV) {
+ dev_addr = echan->cfg.dst_addr;
+ dev_width = echan->cfg.dst_addr_width;
+ burst = echan->cfg.dst_maxburst;
+ } else {
+ dev_err(dev, "%s: bad direction?\n", __func__);
+ return NULL;
+ }
+
+ if (dev_width == DMA_SLAVE_BUSWIDTH_UNDEFINED) {
dev_err(dev, "Undefined slave buswidth\n");
return NULL;
}
@@ -275,14 +274,14 @@ static struct dma_async_tx_descriptor *edma_prep_slave_sg(
}
}
- acnt = echan->addr_width;
+ acnt = dev_width;
/*
* If the maxburst is equal to the fifo width, use
* A-synced transfers. This allows for large contiguous
* buffer transfers using only one PaRAM set.
*/
- if (echan->maxburst == 1) {
+ if (burst == 1) {
edesc->absync = false;
ccnt = sg_dma_len(sg) / acnt / (SZ_64K - 1);
bcnt = sg_dma_len(sg) / acnt - ccnt * (SZ_64K - 1);
@@ -302,7 +301,7 @@ static struct dma_async_tx_descriptor *edma_prep_slave_sg(
*/
} else {
edesc->absync = true;
- bcnt = echan->maxburst;
+ bcnt = burst;
ccnt = sg_dma_len(sg) / (acnt * bcnt);
if (ccnt > (SZ_64K - 1)) {
dev_err(dev, "Exceeded max SG segment size\n");
@@ -313,13 +312,13 @@ static struct dma_async_tx_descriptor *edma_prep_slave_sg(
if (direction == DMA_MEM_TO_DEV) {
src = sg_dma_address(sg);
- dst = echan->addr;
+ dst = dev_addr;
src_bidx = acnt;
src_cidx = cidx;
dst_bidx = 0;
dst_cidx = 0;
} else {
- src = echan->addr;
+ src = dev_addr;
dst = sg_dma_address(sg);
src_bidx = 0;
src_cidx = 0;
--
1.7.9.5
Enable TI EDMA option on OMAP.
Signed-off-by: Matt Porter <[email protected]>
---
drivers/dma/Kconfig | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/drivers/dma/Kconfig b/drivers/dma/Kconfig
index 677cd6e..eaea1c2 100644
--- a/drivers/dma/Kconfig
+++ b/drivers/dma/Kconfig
@@ -210,7 +210,7 @@ config SIRF_DMA
config TI_EDMA
tristate "TI EDMA support"
- depends on ARCH_DAVINCI
+ depends on ARCH_DAVINCI || ARCH_OMAP
select DMA_ENGINE
select DMA_VIRTUAL_CHANNELS
default n
--
1.7.9.5
The binding definition is based on the generic DMA request binding.
Signed-off-by: Matt Porter <[email protected]>
---
.../devicetree/bindings/mmc/ti-omap-hsmmc.txt | 25 +++++++++++++++++++-
1 file changed, 24 insertions(+), 1 deletion(-)
diff --git a/Documentation/devicetree/bindings/mmc/ti-omap-hsmmc.txt b/Documentation/devicetree/bindings/mmc/ti-omap-hsmmc.txt
index be76a23..d1b8932 100644
--- a/Documentation/devicetree/bindings/mmc/ti-omap-hsmmc.txt
+++ b/Documentation/devicetree/bindings/mmc/ti-omap-hsmmc.txt
@@ -19,8 +19,28 @@ ti,dual-volt: boolean, supports dual voltage cards
"supply-name" examples are "vmmc", "vmmc_aux" etc
ti,non-removable: non-removable slot (like eMMC)
ti,needs-special-reset: Requires a special softreset sequence
+dmas: DMA controller phandle and DMA request value ordered pair
+One tx and one rx pair is required.
+dma-names: DMA request names. These strings correspond 1:1 with
+the ordered pairs in dmas. The RX request must be "rx" and the
+TX request must be "tx".
+
+Examples:
+
+[hwmod populated DMA resources]
+
+ mmc1: mmc@0x4809c000 {
+ compatible = "ti,omap4-hsmmc";
+ reg = <0x4809c000 0x400>;
+ ti,hwmods = "mmc1";
+ ti,dual-volt;
+ bus-width = <4>;
+ vmmc-supply = <&vmmc>; /* phandle to regulator node */
+ ti,non-removable;
+ };
+
+[generic DMA request binding]
-Example:
mmc1: mmc@0x4809c000 {
compatible = "ti,omap4-hsmmc";
reg = <0x4809c000 0x400>;
@@ -29,4 +49,7 @@ Example:
bus-width = <4>;
vmmc-supply = <&vmmc>; /* phandle to regulator node */
ti,non-removable;
+ dmas = <&edma 24
+ &edma 25>;
+ dma-names = "tx", "rx";
};
--
1.7.9.5
The binding definition is based on the generic DMA request binding.
Signed-off-by: Matt Porter <[email protected]>
---
Documentation/devicetree/bindings/spi/omap-spi.txt | 27 +++++++++++++++++++-
1 file changed, 26 insertions(+), 1 deletion(-)
diff --git a/Documentation/devicetree/bindings/spi/omap-spi.txt b/Documentation/devicetree/bindings/spi/omap-spi.txt
index 81df374..11aff04 100644
--- a/Documentation/devicetree/bindings/spi/omap-spi.txt
+++ b/Documentation/devicetree/bindings/spi/omap-spi.txt
@@ -7,8 +7,18 @@ Required properties:
- ti,spi-num-cs : Number of chipselect supported by the instance.
- ti,hwmods: Name of the hwmod associated to the McSPI
+Optional properties:
+- dmas: List of DMA controller phandle and DMA request ordered
+ pairs. One tx and one rx pair is required for each chip
+ select.
+- dma-names: List of DMA request names. These strings correspond
+ 1:1 with the ordered pairs in dmas. The string naming is
+ to be "rxN" and "txN" for RX and TX requests,
+ respectively, where N equals the chip select number.
-Example:
+Examples:
+
+[hwmod populated DMA resources]
mcspi1: mcspi@1 {
#address-cells = <1>;
@@ -18,3 +28,18 @@ mcspi1: mcspi@1 {
ti,spi-num-cs = <4>;
};
+[generic DMA request binding]
+
+mcspi1: mcspi@1 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "ti,omap4-mcspi";
+ ti,hwmods = "mcspi1";
+ ti,spi-num-cs = <2>;
+ dmas = <&edma 42
+ &edma 43
+ &edma 44
+ &edma 45>;
+ dma-names = "tx0", "rx0", "tx1", "rx1";
+};
+
--
1.7.9.5
Adds AM33XX SPI support to the am33xx.dtsi and the BeagleBone
dts.
Signed-off-by: Matt Porter <[email protected]>
---
arch/arm/boot/dts/am335x-bone.dts | 17 +++++++++++++++
arch/arm/boot/dts/am33xx.dtsi | 43 +++++++++++++++++++++++++++++++++++++
2 files changed, 60 insertions(+)
diff --git a/arch/arm/boot/dts/am335x-bone.dts b/arch/arm/boot/dts/am335x-bone.dts
index 5510979..23edfd8 100644
--- a/arch/arm/boot/dts/am335x-bone.dts
+++ b/arch/arm/boot/dts/am335x-bone.dts
@@ -18,6 +18,17 @@
reg = <0x80000000 0x10000000>; /* 256 MB */
};
+ am3358_pinmux: pinmux@44e10800 {
+ spi1_pins: pinmux_spi1_pins {
+ pinctrl-single,pins = <
+ 0x190 0x13 /* mcasp0_aclkx.spi1_sclk, OUTPUT_PULLUP | MODE3 */
+ 0x194 0x33 /* mcasp0_fsx.spi1_d0, INPUT_PULLUP | MODE3 */
+ 0x198 0x13 /* mcasp0_axr0.spi1_d1, OUTPUT_PULLUP | MODE3 */
+ 0x19c 0x13 /* mcasp0_ahclkr.spi1_cs0, OUTPUT_PULLUP | MODE3 */
+ >;
+ };
+ };
+
ocp {
uart1: serial@44e09000 {
status = "okay";
@@ -84,3 +95,9 @@
&mmc1 {
vmmc-supply = <&ldo3_reg>;
};
+
+&spi1 {
+ status = "okay";
+ pinctrl-names = "default";
+ pinctrl-0 = <&spi1_pins>;
+};
diff --git a/arch/arm/boot/dts/am33xx.dtsi b/arch/arm/boot/dts/am33xx.dtsi
index ef8e105..854235e 100644
--- a/arch/arm/boot/dts/am33xx.dtsi
+++ b/arch/arm/boot/dts/am33xx.dtsi
@@ -40,6 +40,15 @@
};
};
+ am3358_pinmux: pinmux@44e10800 {
+ compatible = "pinctrl-single";
+ reg = <0x44e10800 0x0238>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ pinctrl-single,register-width = <32>;
+ pinctrl-single,function-mask = <0x7f>;
+ };
+
/*
* XXX: Use a flat representation of the AM33XX interconnect.
* The real AM33XX interconnect network is quite complex.Since
@@ -260,6 +269,40 @@
status = "disabled";
};
+ spi0: spi@48030000 {
+ compatible = "ti,omap4-mcspi";
+ ti,hwmods = "spi0";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <0x48030000 0x400>;
+ interrupt-parent = <&intc>;
+ interrupt = <65>;
+ dmas = <&edma 16
+ &edma 17
+ &edma 18
+ &edma 19>;
+ dma-names = "tx0", "rx0", "tx1", "rx1";
+ ti,spi-num-cs = <2>;
+ status = "disabled";
+ };
+
+ spi1: spi@481a0000 {
+ compatible = "ti,omap4-mcspi";
+ ti,hwmods = "spi1";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <0x481a0000 0x400>;
+ interrupt-parent = <&intc>;
+ interrupt = <125>;
+ dmas = <&edma 42
+ &edma 43
+ &edma 44
+ &edma 45>;
+ dma-names = "tx0", "rx0", "tx1", "rx1";
+ ti,spi-num-cs = <2>;
+ status = "disabled";
+ };
+
wdt2: wdt@44e35000 {
compatible = "ti,omap3-wdt";
ti,hwmods = "wd_timer2";
--
1.7.9.5
AM33xx requires special handling in hsmmc initialization
platform glue.
Signed-off-by: Matt Porter <[email protected]>
---
arch/arm/mach-omap2/hsmmc.c | 7 ++++---
1 file changed, 4 insertions(+), 3 deletions(-)
diff --git a/arch/arm/mach-omap2/hsmmc.c b/arch/arm/mach-omap2/hsmmc.c
index 4d3a632..42ce988 100644
--- a/arch/arm/mach-omap2/hsmmc.c
+++ b/arch/arm/mach-omap2/hsmmc.c
@@ -365,7 +365,7 @@ static int __init omap_hsmmc_pdata_init(struct omap2_hsmmc_info *c,
else
mmc->slots[0].ocr_mask = c->ocr_mask;
- if (!soc_is_am35xx())
+ if (!soc_is_am35xx() && !soc_is_am33xx())
mmc->slots[0].features |= HSMMC_HAS_PBIAS;
if (cpu_is_omap44xx() && (omap_rev() > OMAP4430_REV_ES1_0))
@@ -388,7 +388,7 @@ static int __init omap_hsmmc_pdata_init(struct omap2_hsmmc_info *c,
}
}
- if (soc_is_am35xx())
+ if (soc_is_am35xx() || soc_is_am33xx())
mmc->slots[0].set_power = nop_mmc_set_power;
/* OMAP3630 HSMMC1 supports only 4-bit */
@@ -489,7 +489,8 @@ static void __init omap_hsmmc_init_one(struct omap2_hsmmc_info *hsmmcinfo,
if (res < 0)
goto free_mmc;
- omap_hsmmc_mux(mmc_data, (ctrl_nr - 1));
+ if (!soc_is_am33xx())
+ omap_hsmmc_mux(mmc_data, (ctrl_nr - 1));
name = "omap_hsmmc";
res = snprintf(oh_name, MAX_OMAP_MMC_HWMOD_NAME_LEN,
--
1.7.9.5
Convert dmaengine channel requests to use
dma_request_slave_channel_compat(). This supports the DT case of
platforms requiring channel selection from either the OMAP DMA or
the EDMA engine. AM33xx only boots from DT and is the only user
implementing EDMA so in the !DT case we can default to the OMAP DMA
filter.
Signed-off-by: Matt Porter <[email protected]>
---
drivers/spi/spi-omap2-mcspi.c | 65 ++++++++++++++++++++++++++++-------------
1 file changed, 45 insertions(+), 20 deletions(-)
diff --git a/drivers/spi/spi-omap2-mcspi.c b/drivers/spi/spi-omap2-mcspi.c
index 3542fdc..793ae8c 100644
--- a/drivers/spi/spi-omap2-mcspi.c
+++ b/drivers/spi/spi-omap2-mcspi.c
@@ -103,6 +103,9 @@ struct omap2_mcspi_dma {
struct completion dma_tx_completion;
struct completion dma_rx_completion;
+
+ char dma_rx_ch_name[14];
+ char dma_tx_ch_name[14];
};
/* use PIO for small transfers, avoiding DMA setup/teardown overhead and
@@ -819,14 +822,23 @@ static int omap2_mcspi_request_dma(struct spi_device *spi)
dma_cap_zero(mask);
dma_cap_set(DMA_SLAVE, mask);
sig = mcspi_dma->dma_rx_sync_dev;
- mcspi_dma->dma_rx = dma_request_channel(mask, omap_dma_filter_fn, &sig);
+
+ mcspi_dma->dma_rx =
+ dma_request_slave_channel_compat(mask, omap_dma_filter_fn,
+ &sig, &master->dev,
+ mcspi_dma->dma_rx_ch_name);
+
if (!mcspi_dma->dma_rx) {
dev_err(&spi->dev, "no RX DMA engine channel for McSPI\n");
return -EAGAIN;
}
sig = mcspi_dma->dma_tx_sync_dev;
- mcspi_dma->dma_tx = dma_request_channel(mask, omap_dma_filter_fn, &sig);
+ mcspi_dma->dma_tx =
+ dma_request_slave_channel_compat(mask, omap_dma_filter_fn,
+ &sig, &master->dev,
+ mcspi_dma->dma_tx_ch_name);
+
if (!mcspi_dma->dma_tx) {
dev_err(&spi->dev, "no TX DMA engine channel for McSPI\n");
dma_release_channel(mcspi_dma->dma_rx);
@@ -1217,29 +1229,42 @@ static int __devinit omap2_mcspi_probe(struct platform_device *pdev)
goto free_master;
for (i = 0; i < master->num_chipselect; i++) {
- char dma_ch_name[14];
+ char *dma_rx_ch_name = mcspi->dma_channels[i].dma_rx_ch_name;
+ char *dma_tx_ch_name = mcspi->dma_channels[i].dma_tx_ch_name;
struct resource *dma_res;
- sprintf(dma_ch_name, "rx%d", i);
- dma_res = platform_get_resource_byname(pdev, IORESOURCE_DMA,
- dma_ch_name);
- if (!dma_res) {
- dev_dbg(&pdev->dev, "cannot get DMA RX channel\n");
- status = -ENODEV;
- break;
- }
+ sprintf(dma_rx_ch_name, "rx%d", i);
+ if (!pdev->dev.of_node) {
+ dma_res =
+ platform_get_resource_byname(pdev,
+ IORESOURCE_DMA,
+ dma_rx_ch_name);
+ if (!dma_res) {
+ dev_dbg(&pdev->dev,
+ "cannot get DMA RX channel\n");
+ status = -ENODEV;
+ break;
+ }
- mcspi->dma_channels[i].dma_rx_sync_dev = dma_res->start;
- sprintf(dma_ch_name, "tx%d", i);
- dma_res = platform_get_resource_byname(pdev, IORESOURCE_DMA,
- dma_ch_name);
- if (!dma_res) {
- dev_dbg(&pdev->dev, "cannot get DMA TX channel\n");
- status = -ENODEV;
- break;
+ mcspi->dma_channels[i].dma_rx_sync_dev =
+ dma_res->start;
}
+ sprintf(dma_tx_ch_name, "tx%d", i);
+ if (!pdev->dev.of_node) {
+ dma_res =
+ platform_get_resource_byname(pdev,
+ IORESOURCE_DMA,
+ dma_tx_ch_name);
+ if (!dma_res) {
+ dev_dbg(&pdev->dev,
+ "cannot get DMA TX channel\n");
+ status = -ENODEV;
+ break;
+ }
- mcspi->dma_channels[i].dma_tx_sync_dev = dma_res->start;
+ mcspi->dma_channels[i].dma_tx_sync_dev =
+ dma_res->start;
+ }
}
if (status < 0)
--
1.7.9.5
Adds AM33XX MMC support to the am33xx.dtsi and the BeagleBone
dts.
Signed-off-by: Matt Porter <[email protected]>
---
arch/arm/boot/dts/am335x-bone.dts | 6 ++++++
arch/arm/boot/dts/am33xx.dtsi | 27 +++++++++++++++++++++++++++
2 files changed, 33 insertions(+)
diff --git a/arch/arm/boot/dts/am335x-bone.dts b/arch/arm/boot/dts/am335x-bone.dts
index c634f87..5510979 100644
--- a/arch/arm/boot/dts/am335x-bone.dts
+++ b/arch/arm/boot/dts/am335x-bone.dts
@@ -70,6 +70,8 @@
};
ldo3_reg: regulator@5 {
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <3300000>;
regulator-always-on;
};
@@ -78,3 +80,7 @@
};
};
};
+
+&mmc1 {
+ vmmc-supply = <&ldo3_reg>;
+};
diff --git a/arch/arm/boot/dts/am33xx.dtsi b/arch/arm/boot/dts/am33xx.dtsi
index 2ddb31b..ef8e105 100644
--- a/arch/arm/boot/dts/am33xx.dtsi
+++ b/arch/arm/boot/dts/am33xx.dtsi
@@ -233,6 +233,33 @@
status = "disabled";
};
+ mmc1: mmc@48060000 {
+ compatible = "ti,omap3-hsmmc";
+ ti,hwmods = "mmc1";
+ ti,dual-volt;
+ ti,needs-special-reset;
+ dmas = <&edma 24
+ &edma 25>;
+ dma-names = "tx", "rx";
+ };
+
+ mmc2: mmc@481d8000 {
+ compatible = "ti,omap3-hsmmc";
+ ti,hwmods = "mmc2";
+ ti,needs-special-reset;
+ dmas = <&edma 2
+ &edma 3>;
+ dma-names = "tx", "rx";
+ status = "disabled";
+ };
+
+ mmc3: mmc@47810000 {
+ compatible = "ti,omap3-hsmmc";
+ ti,hwmods = "mmc3";
+ ti,needs-special-reset;
+ status = "disabled";
+ };
+
wdt2: wdt@44e35000 {
compatible = "ti,omap3-wdt";
ti,hwmods = "wd_timer2";
--
1.7.9.5
The EDMA DMAC has a hardware limitation that prevents supporting
scatter gather lists with any number of segments. Since the EDMA
DMA Engine driver sets the maximum segments to 16, we do the
same.
TODO: this will be replaced once the DMA Engine API supports an
API to query the DMAC's segment size limit.
Signed-off-by: Matt Porter <[email protected]>
---
drivers/mmc/host/omap_hsmmc.c | 10 ++++++++++
1 file changed, 10 insertions(+)
diff --git a/drivers/mmc/host/omap_hsmmc.c b/drivers/mmc/host/omap_hsmmc.c
index b327cd0..52bab01 100644
--- a/drivers/mmc/host/omap_hsmmc.c
+++ b/drivers/mmc/host/omap_hsmmc.c
@@ -1828,6 +1828,16 @@ static int __devinit omap_hsmmc_probe(struct platform_device *pdev)
* as we want. */
mmc->max_segs = 1024;
+ /* Eventually we should get our max_segs limitation for EDMA by
+ * querying the dmaengine API */
+ if (pdev->dev.of_node) {
+ struct device_node *parent = pdev->dev.of_node->parent;
+ struct device_node *node;
+ node = of_find_node_by_name(parent, "edma");
+ if (node)
+ mmc->max_segs = 16;
+ }
+
mmc->max_blk_size = 512; /* Block Length at max can be 1024 */
mmc->max_blk_count = 0xFFFF; /* No. of Blocks is 16 bits */
mmc->max_req_size = mmc->max_blk_size * mmc->max_blk_count;
--
1.7.9.5
Adds support for parsing the TI EDMA DT data into the required
EDMA private API platform data.
Calls runtime PM API only in the DT case in order to unidle the
associated hwmods on AM335x.
TODO: add AM33XX crossbar support and DT binding
Signed-off-by: Matt Porter <[email protected]>
---
arch/arm/common/edma.c | 252 +++++++++++++++++++++++++--
arch/arm/mach-davinci/board-da830-evm.c | 4 +-
arch/arm/mach-davinci/board-da850-evm.c | 8 +-
arch/arm/mach-davinci/board-dm646x-evm.c | 4 +-
arch/arm/mach-davinci/board-omapl138-hawk.c | 8 +-
arch/arm/mach-davinci/devices-da8xx.c | 8 +-
arch/arm/mach-davinci/devices-tnetv107x.c | 4 +-
arch/arm/mach-davinci/dm355.c | 4 +-
arch/arm/mach-davinci/dm365.c | 4 +-
arch/arm/mach-davinci/dm644x.c | 4 +-
arch/arm/mach-davinci/dm646x.c | 4 +-
include/linux/platform_data/edma.h | 8 +-
12 files changed, 271 insertions(+), 41 deletions(-)
diff --git a/arch/arm/common/edma.c b/arch/arm/common/edma.c
index a3d189d..fd039db 100644
--- a/arch/arm/common/edma.c
+++ b/arch/arm/common/edma.c
@@ -24,6 +24,13 @@
#include <linux/platform_device.h>
#include <linux/io.h>
#include <linux/slab.h>
+#include <linux/edma.h>
+#include <linux/err.h>
+#include <linux/of_address.h>
+#include <linux/of_device.h>
+#include <linux/of_dma.h>
+#include <linux/of_irq.h>
+#include <linux/pm_runtime.h>
#include <linux/platform_data/edma.h>
@@ -1366,30 +1373,237 @@ void edma_clear_event(unsigned channel)
EXPORT_SYMBOL(edma_clear_event);
/*-----------------------------------------------------------------------*/
+static int edma_of_read_u32_to_s8_array(const struct device_node *np,
+ const char *propname, s8 *out_values,
+ size_t sz)
+{
+ struct property *prop = of_find_property(np, propname, NULL);
+ const __be32 *val;
+
+ if (!prop)
+ return -EINVAL;
+ if (!prop->value)
+ return -ENODATA;
+ if ((sz * sizeof(u32)) > prop->length)
+ return -EOVERFLOW;
+
+ val = prop->value;
+
+ while (sz--)
+ *out_values++ = (s8)(be32_to_cpup(val++) & 0xff);
+
+ /* Terminate it */
+ *out_values++ = -1;
+ *out_values++ = -1;
+
+ return 0;
+}
+
+static int edma_of_read_u32_to_s16_array(const struct device_node *np,
+ const char *propname, s16 *out_values,
+ size_t sz)
+{
+ struct property *prop = of_find_property(np, propname, NULL);
+ const __be32 *val;
+
+ if (!prop)
+ return -EINVAL;
+ if (!prop->value)
+ return -ENODATA;
+ if ((sz * sizeof(u32)) > prop->length)
+ return -EOVERFLOW;
+
+ val = prop->value;
+
+ while (sz--)
+ *out_values++ = (s16)(be32_to_cpup(val++) & 0xffff);
+
+ /* Terminate it */
+ *out_values++ = -1;
+ *out_values++ = -1;
+
+ return 0;
+}
+
+static int edma_of_parse_dt(struct device *dev,
+ struct device_node *node,
+ struct edma_soc_info *pdata)
+{
+ int ret = 0;
+ u32 value;
+ struct property *prop;
+ size_t sz;
+ struct edma_rsv_info *rsv_info;
+ s16 (*rsv_chans)[2], (*rsv_slots)[2];
+ s8 (*queue_tc_map)[2], (*queue_priority_map)[2];
+
+ ret = of_property_read_u32(node, "dma-channels", &value);
+ if (ret < 0)
+ return ret;
+ pdata->n_channel = value;
+
+ ret = of_property_read_u32(node, "ti,edma-regions", &value);
+ if (ret < 0)
+ return ret;
+ pdata->n_region = value;
+
+ ret = of_property_read_u32(node, "ti,edma-slots", &value);
+ if (ret < 0)
+ return ret;
+ pdata->n_slot = value;
+
+ pdata->n_cc = 1;
+ /* This is unused */
+ pdata->n_tc = 3;
+
+ rsv_info =
+ devm_kzalloc(dev, sizeof(struct edma_rsv_info), GFP_KERNEL);
+ if (!rsv_info)
+ return -ENOMEM;
+ pdata->rsv = rsv_info;
+
+ /* Build the reserved channel/slots arrays */
+ prop = of_find_property(node, "ti,edma-reserved-channels", &sz);
+ if (prop) {
+ rsv_chans = devm_kzalloc(dev,
+ sz/sizeof(s16) + 2*sizeof(s16),
+ GFP_KERNEL);
+ if (!rsv_chans)
+ return -ENOMEM;
+ pdata->rsv->rsv_chans = rsv_chans;
+
+ ret = edma_of_read_u32_to_s16_array(node,
+ "ti,edma-reserved-channels",
+ (s16 *)rsv_chans,
+ sz/sizeof(u32));
+ if (ret < 0)
+ return ret;
+ }
+
+ prop = of_find_property(node, "ti,edma-reserved-slots", &sz);
+ if (prop) {
+ rsv_slots = devm_kzalloc(dev,
+ sz/sizeof(s16) + 2*sizeof(s16),
+ GFP_KERNEL);
+ if (!rsv_slots)
+ return -ENOMEM;
+ pdata->rsv->rsv_slots = rsv_slots;
+
+ ret = edma_of_read_u32_to_s16_array(node,
+ "ti,edma-reserved-slots",
+ (s16 *)rsv_slots,
+ sz/sizeof(u32));
+ if (ret < 0)
+ return ret;
+ }
+
+ prop = of_find_property(node, "ti,edma-queue-tc-map", &sz);
+ if (!prop)
+ return -EINVAL;
+
+ queue_tc_map = devm_kzalloc(dev,
+ sz/sizeof(s8) + 2*sizeof(s8),
+ GFP_KERNEL);
+ if (!queue_tc_map)
+ return -ENOMEM;
+ pdata->queue_tc_mapping = queue_tc_map;
+
+ ret = edma_of_read_u32_to_s8_array(node,
+ "ti,edma-queue-tc-map",
+ (s8 *)queue_tc_map,
+ sz/sizeof(u32));
+ if (ret < 0)
+ return ret;
+
+ prop = of_find_property(node, "ti,edma-queue-priority-map", &sz);
+ if (!prop)
+ return -EINVAL;
+
+ queue_priority_map = devm_kzalloc(dev,
+ sz/sizeof(s8) + 2*sizeof(s8),
+ GFP_KERNEL);
+ if (!queue_priority_map)
+ return -ENOMEM;
+ pdata->queue_priority_mapping = queue_priority_map;
+
+ ret = edma_of_read_u32_to_s8_array(node,
+ "ti,edma-queue-tc-map",
+ (s8 *)queue_priority_map,
+ sz/sizeof(u32));
+ if (ret < 0)
+ return ret;
+
+ ret = of_property_read_u32(node, "ti,edma-default-queue", &value);
+ if (ret < 0)
+ return ret;
+ pdata->default_queue = value;
+
+ return ret;
+}
+
+static struct of_dma_filter_info edma_filter_info = {
+ .filter_fn = edma_filter_fn,
+};
static int __init edma_probe(struct platform_device *pdev)
{
struct edma_soc_info **info = pdev->dev.platform_data;
- const s8 (*queue_priority_mapping)[2];
- const s8 (*queue_tc_mapping)[2];
+ s8 (*queue_priority_mapping)[2];
+ s8 (*queue_tc_mapping)[2];
int i, j, off, ln, found = 0;
int status = -1;
- const s16 (*rsv_chans)[2];
- const s16 (*rsv_slots)[2];
+ s16 (*rsv_chans)[2];
+ s16 (*rsv_slots)[2];
int irq[EDMA_MAX_CC] = {0, 0};
int err_irq[EDMA_MAX_CC] = {0, 0};
struct resource *r[EDMA_MAX_CC] = {NULL};
+ struct resource res[EDMA_MAX_CC];
resource_size_t len[EDMA_MAX_CC];
char res_name[10];
char irq_name[10];
+ struct device_node *node = pdev->dev.of_node;
+ struct device *dev = &pdev->dev;
+ struct edma_soc_info *pdata;
+
+ if (node) {
+ int ret;
+ pdata = devm_kzalloc(dev,
+ sizeof(struct edma_soc_info),
+ GFP_KERNEL);
+ edma_of_parse_dt(dev, node, pdata);
+ info = &pdata;
+ dma_cap_set(DMA_SLAVE, edma_filter_info.dma_cap);
+ of_dma_controller_register(dev->of_node,
+ of_dma_simple_xlate,
+ &edma_filter_info);
+ pm_runtime_enable(dev);
+ ret = pm_runtime_get_sync(dev);
+ if (IS_ERR_VALUE(ret)) {
+ dev_err(dev, "pm_runtime_get_sync() failed\n");
+ return ret;
+ }
+ }
if (!info)
return -ENODEV;
for (j = 0; j < EDMA_MAX_CC; j++) {
- sprintf(res_name, "edma_cc%d", j);
- r[j] = platform_get_resource_byname(pdev, IORESOURCE_MEM,
+ if (node) {
+ int err;
+ err = of_address_to_resource(node, 0, &res[j]);
+ if (err) {
+ dev_err(dev,
+ "unable to find 'reg' property\n");
+ return -EIO;
+ }
+ r[j] = &res[j];
+
+ } else {
+ sprintf(res_name, "edma_cc%d", j);
+ r[j] = platform_get_resource_byname(pdev,
+ IORESOURCE_MEM,
res_name);
+ }
if (!r[j] || !info[j]) {
if (found)
break;
@@ -1465,8 +1679,12 @@ static int __init edma_probe(struct platform_device *pdev)
}
}
- sprintf(irq_name, "edma%d", j);
- irq[j] = platform_get_irq_byname(pdev, irq_name);
+ if (node)
+ irq[j] = irq_of_parse_and_map(node, 0);
+ else {
+ sprintf(irq_name, "edma%d", j);
+ irq[j] = platform_get_irq_byname(pdev, irq_name);
+ }
edma_cc[j]->irq_res_start = irq[j];
status = request_irq(irq[j], dma_irq_handler, 0, "edma",
&pdev->dev);
@@ -1476,8 +1694,12 @@ static int __init edma_probe(struct platform_device *pdev)
goto fail;
}
- sprintf(irq_name, "edma%d_err", j);
- err_irq[j] = platform_get_irq_byname(pdev, irq_name);
+ if (node)
+ err_irq[j] = irq_of_parse_and_map(node, 2);
+ else {
+ sprintf(irq_name, "edma%d_err", j);
+ err_irq[j] = platform_get_irq_byname(pdev, irq_name);
+ }
edma_cc[j]->irq_res_end = err_irq[j];
status = request_irq(err_irq[j], dma_ccerr_handler, 0,
"edma_error", &pdev->dev);
@@ -1538,9 +1760,17 @@ fail1:
return status;
}
+static const struct of_device_id edma_of_ids[] = {
+ { .compatible = "ti,edma3", },
+ {}
+};
static struct platform_driver edma_driver = {
- .driver.name = "edma",
+ .driver = {
+ .name = "edma",
+ .of_match_table = edma_of_ids,
+ },
+ .probe = edma_probe,
};
static int __init edma_init(void)
diff --git a/arch/arm/mach-davinci/board-da830-evm.c b/arch/arm/mach-davinci/board-da830-evm.c
index 95b5e10..ffcbec1 100644
--- a/arch/arm/mach-davinci/board-da830-evm.c
+++ b/arch/arm/mach-davinci/board-da830-evm.c
@@ -512,7 +512,7 @@ static struct davinci_i2c_platform_data da830_evm_i2c_0_pdata = {
* example: Timer, GPIO, UART events etc) on da830/omap-l137 EVM, hence
* they are being reserved for codecs on the DSP side.
*/
-static const s16 da830_dma_rsv_chans[][2] = {
+static s16 da830_dma_rsv_chans[][2] = {
/* (offset, number) */
{ 8, 2},
{12, 2},
@@ -521,7 +521,7 @@ static const s16 da830_dma_rsv_chans[][2] = {
{-1, -1}
};
-static const s16 da830_dma_rsv_slots[][2] = {
+static s16 da830_dma_rsv_slots[][2] = {
/* (offset, number) */
{ 8, 2},
{12, 2},
diff --git a/arch/arm/mach-davinci/board-da850-evm.c b/arch/arm/mach-davinci/board-da850-evm.c
index 1295e61..7068c2d 100644
--- a/arch/arm/mach-davinci/board-da850-evm.c
+++ b/arch/arm/mach-davinci/board-da850-evm.c
@@ -1083,7 +1083,7 @@ device_initcall(da850_evm_config_emac);
* example: Timer, GPIO, UART events etc) on da850/omap-l138 EVM, hence
* they are being reserved for codecs on the DSP side.
*/
-static const s16 da850_dma0_rsv_chans[][2] = {
+static s16 da850_dma0_rsv_chans[][2] = {
/* (offset, number) */
{ 8, 6},
{24, 4},
@@ -1091,7 +1091,7 @@ static const s16 da850_dma0_rsv_chans[][2] = {
{-1, -1}
};
-static const s16 da850_dma0_rsv_slots[][2] = {
+static s16 da850_dma0_rsv_slots[][2] = {
/* (offset, number) */
{ 8, 6},
{24, 4},
@@ -1099,14 +1099,14 @@ static const s16 da850_dma0_rsv_slots[][2] = {
{-1, -1}
};
-static const s16 da850_dma1_rsv_chans[][2] = {
+static s16 da850_dma1_rsv_chans[][2] = {
/* (offset, number) */
{ 0, 28},
{30, 2},
{-1, -1}
};
-static const s16 da850_dma1_rsv_slots[][2] = {
+static s16 da850_dma1_rsv_slots[][2] = {
/* (offset, number) */
{ 0, 28},
{30, 90},
diff --git a/arch/arm/mach-davinci/board-dm646x-evm.c b/arch/arm/mach-davinci/board-dm646x-evm.c
index 9944367..a4dbd3c 100644
--- a/arch/arm/mach-davinci/board-dm646x-evm.c
+++ b/arch/arm/mach-davinci/board-dm646x-evm.c
@@ -732,7 +732,7 @@ static struct davinci_uart_config uart_config __initdata = {
* example: Timer, GPIO, UART events etc) on dm646x, hence they are being
* reserved for codecs on the DSP side.
*/
-static const s16 dm646x_dma_rsv_chans[][2] = {
+static s16 dm646x_dma_rsv_chans[][2] = {
/* (offset, number) */
{ 0, 4},
{13, 3},
@@ -742,7 +742,7 @@ static const s16 dm646x_dma_rsv_chans[][2] = {
{-1, -1}
};
-static const s16 dm646x_dma_rsv_slots[][2] = {
+static s16 dm646x_dma_rsv_slots[][2] = {
/* (offset, number) */
{ 0, 4},
{13, 3},
diff --git a/arch/arm/mach-davinci/board-omapl138-hawk.c b/arch/arm/mach-davinci/board-omapl138-hawk.c
index dc1208e..09c34f8 100644
--- a/arch/arm/mach-davinci/board-omapl138-hawk.c
+++ b/arch/arm/mach-davinci/board-omapl138-hawk.c
@@ -70,7 +70,7 @@ static __init void omapl138_hawk_config_emac(void)
* example: Timer, GPIO, UART events etc) on da850/omap-l138 EVM/Hawkboard,
* hence they are being reserved for codecs on the DSP side.
*/
-static const s16 da850_dma0_rsv_chans[][2] = {
+static s16 da850_dma0_rsv_chans[][2] = {
/* (offset, number) */
{ 8, 6},
{24, 4},
@@ -78,7 +78,7 @@ static const s16 da850_dma0_rsv_chans[][2] = {
{-1, -1}
};
-static const s16 da850_dma0_rsv_slots[][2] = {
+static s16 da850_dma0_rsv_slots[][2] = {
/* (offset, number) */
{ 8, 6},
{24, 4},
@@ -86,14 +86,14 @@ static const s16 da850_dma0_rsv_slots[][2] = {
{-1, -1}
};
-static const s16 da850_dma1_rsv_chans[][2] = {
+static s16 da850_dma1_rsv_chans[][2] = {
/* (offset, number) */
{ 0, 28},
{30, 2},
{-1, -1}
};
-static const s16 da850_dma1_rsv_slots[][2] = {
+static s16 da850_dma1_rsv_slots[][2] = {
/* (offset, number) */
{ 0, 28},
{30, 90},
diff --git a/arch/arm/mach-davinci/devices-da8xx.c b/arch/arm/mach-davinci/devices-da8xx.c
index bd2f72b..1f9c6ff 100644
--- a/arch/arm/mach-davinci/devices-da8xx.c
+++ b/arch/arm/mach-davinci/devices-da8xx.c
@@ -103,27 +103,27 @@ struct platform_device da8xx_serial_device = {
},
};
-static const s8 da8xx_queue_tc_mapping[][2] = {
+static s8 da8xx_queue_tc_mapping[][2] = {
/* {event queue no, TC no} */
{0, 0},
{1, 1},
{-1, -1}
};
-static const s8 da8xx_queue_priority_mapping[][2] = {
+static s8 da8xx_queue_priority_mapping[][2] = {
/* {event queue no, Priority} */
{0, 3},
{1, 7},
{-1, -1}
};
-static const s8 da850_queue_tc_mapping[][2] = {
+static s8 da850_queue_tc_mapping[][2] = {
/* {event queue no, TC no} */
{0, 0},
{-1, -1}
};
-static const s8 da850_queue_priority_mapping[][2] = {
+static s8 da850_queue_priority_mapping[][2] = {
/* {event queue no, Priority} */
{0, 3},
{-1, -1}
diff --git a/arch/arm/mach-davinci/devices-tnetv107x.c b/arch/arm/mach-davinci/devices-tnetv107x.c
index 59efd7f..d2453c9 100644
--- a/arch/arm/mach-davinci/devices-tnetv107x.c
+++ b/arch/arm/mach-davinci/devices-tnetv107x.c
@@ -58,14 +58,14 @@
#define TNETV107X_DMACH_SDIO1_RX 28
#define TNETV107X_DMACH_SDIO1_TX 29
-static const s8 edma_tc_mapping[][2] = {
+static s8 edma_tc_mapping[][2] = {
/* event queue no TC no */
{ 0, 0 },
{ 1, 1 },
{ -1, -1 }
};
-static const s8 edma_priority_mapping[][2] = {
+static s8 edma_priority_mapping[][2] = {
/* event queue no Prio */
{ 0, 3 },
{ 1, 7 },
diff --git a/arch/arm/mach-davinci/dm355.c b/arch/arm/mach-davinci/dm355.c
index b165c27..cdefef3 100644
--- a/arch/arm/mach-davinci/dm355.c
+++ b/arch/arm/mach-davinci/dm355.c
@@ -567,7 +567,7 @@ static u8 dm355_default_priorities[DAVINCI_N_AINTC_IRQ] = {
/*----------------------------------------------------------------------*/
-static const s8
+static s8
queue_tc_mapping[][2] = {
/* {event queue no, TC no} */
{0, 0},
@@ -575,7 +575,7 @@ queue_tc_mapping[][2] = {
{-1, -1},
};
-static const s8
+static s8
queue_priority_mapping[][2] = {
/* {event queue no, Priority} */
{0, 3},
diff --git a/arch/arm/mach-davinci/dm365.c b/arch/arm/mach-davinci/dm365.c
index a611716..801e162 100644
--- a/arch/arm/mach-davinci/dm365.c
+++ b/arch/arm/mach-davinci/dm365.c
@@ -822,7 +822,7 @@ static u8 dm365_default_priorities[DAVINCI_N_AINTC_IRQ] = {
};
/* Four Transfer Controllers on DM365 */
-static const s8
+static s8
dm365_queue_tc_mapping[][2] = {
/* {event queue no, TC no} */
{0, 0},
@@ -832,7 +832,7 @@ dm365_queue_tc_mapping[][2] = {
{-1, -1},
};
-static const s8
+static s8
dm365_queue_priority_mapping[][2] = {
/* {event queue no, Priority} */
{0, 7},
diff --git a/arch/arm/mach-davinci/dm644x.c b/arch/arm/mach-davinci/dm644x.c
index 0949dc4..e9cc051 100644
--- a/arch/arm/mach-davinci/dm644x.c
+++ b/arch/arm/mach-davinci/dm644x.c
@@ -497,7 +497,7 @@ static u8 dm644x_default_priorities[DAVINCI_N_AINTC_IRQ] = {
/*----------------------------------------------------------------------*/
-static const s8
+static s8
queue_tc_mapping[][2] = {
/* {event queue no, TC no} */
{0, 0},
@@ -505,7 +505,7 @@ queue_tc_mapping[][2] = {
{-1, -1},
};
-static const s8
+static s8
queue_priority_mapping[][2] = {
/* {event queue no, Priority} */
{0, 3},
diff --git a/arch/arm/mach-davinci/dm646x.c b/arch/arm/mach-davinci/dm646x.c
index 08f9dab..b4a4da6 100644
--- a/arch/arm/mach-davinci/dm646x.c
+++ b/arch/arm/mach-davinci/dm646x.c
@@ -531,7 +531,7 @@ static u8 dm646x_default_priorities[DAVINCI_N_AINTC_IRQ] = {
/*----------------------------------------------------------------------*/
/* Four Transfer Controllers on DM646x */
-static const s8
+static s8
dm646x_queue_tc_mapping[][2] = {
/* {event queue no, TC no} */
{0, 0},
@@ -541,7 +541,7 @@ dm646x_queue_tc_mapping[][2] = {
{-1, -1},
};
-static const s8
+static s8
dm646x_queue_priority_mapping[][2] = {
/* {event queue no, Priority} */
{0, 4},
diff --git a/include/linux/platform_data/edma.h b/include/linux/platform_data/edma.h
index 7396f0b3..b20b586 100644
--- a/include/linux/platform_data/edma.h
+++ b/include/linux/platform_data/edma.h
@@ -168,8 +168,8 @@ void edma_resume(unsigned channel);
struct edma_rsv_info {
- const s16 (*rsv_chans)[2];
- const s16 (*rsv_slots)[2];
+ s16 (*rsv_chans)[2];
+ s16 (*rsv_slots)[2];
};
/* platform_data for EDMA driver */
@@ -191,8 +191,8 @@ struct edma_soc_info {
/* Resource reservation for other cores */
struct edma_rsv_info *rsv;
- const s8 (*queue_tc_mapping)[2];
- const s8 (*queue_priority_mapping)[2];
+ s8 (*queue_tc_mapping)[2];
+ s8 (*queue_priority_mapping)[2];
};
#endif
--
1.7.9.5
Convert dmaengine channel requests to use
dma_request_slave_channel_compat(). This supports the DT case of
platforms requiring channel selection from either the OMAP DMA or
the EDMA engine. AM33xx only boots from DT and is the only user
implementing EDMA so in the !DT case we can default to the OMAP DMA
filter.
Signed-off-by: Matt Porter <[email protected]>
---
drivers/mmc/host/omap_hsmmc.c | 10 ++++++++--
1 file changed, 8 insertions(+), 2 deletions(-)
diff --git a/drivers/mmc/host/omap_hsmmc.c b/drivers/mmc/host/omap_hsmmc.c
index 54bfd0c..b327cd0 100644
--- a/drivers/mmc/host/omap_hsmmc.c
+++ b/drivers/mmc/host/omap_hsmmc.c
@@ -1866,14 +1866,20 @@ static int __devinit omap_hsmmc_probe(struct platform_device *pdev)
dma_cap_zero(mask);
dma_cap_set(DMA_SLAVE, mask);
- host->rx_chan = dma_request_channel(mask, omap_dma_filter_fn, &rx_req);
+ host->rx_chan =
+ dma_request_slave_channel_compat(mask, omap_dma_filter_fn,
+ &rx_req, &pdev->dev, "rx");
+
if (!host->rx_chan) {
dev_err(mmc_dev(host->mmc), "unable to obtain RX DMA engine channel %u\n", rx_req);
ret = -ENXIO;
goto err_irq;
}
- host->tx_chan = dma_request_channel(mask, omap_dma_filter_fn, &tx_req);
+ host->tx_chan =
+ dma_request_slave_channel_compat(mask, omap_dma_filter_fn,
+ &tx_req, &pdev->dev, "tx");
+
if (!host->tx_chan) {
dev_err(mmc_dev(host->mmc), "unable to obtain TX DMA engine channel %u\n", tx_req);
ret = -ENXIO;
--
1.7.9.5
Adds a dma_request_slave_channel_compat() wrapper which accepts
both the arguments from dma_request_channel() and
dma_request_slave_channel(). Based on whether the driver is
instantiated via DT, the appropriate channel request call will be
made.
This allows for a much cleaner migration of drivers to the
dmaengine DT API as platforms continue to be mixed between those
that boot using DT and those that do not.
Suggested-by: Tony Lindgren <[email protected]>
Signed-off-by: Matt Porter <[email protected]>
---
include/linux/dmaengine.h | 10 ++++++++++
1 file changed, 10 insertions(+)
diff --git a/include/linux/dmaengine.h b/include/linux/dmaengine.h
index c88f302..11d9e25 100644
--- a/include/linux/dmaengine.h
+++ b/include/linux/dmaengine.h
@@ -1007,6 +1007,16 @@ void dma_run_dependencies(struct dma_async_tx_descriptor *tx);
struct dma_chan *dma_find_channel(enum dma_transaction_type tx_type);
struct dma_chan *net_dma_find_channel(void);
#define dma_request_channel(mask, x, y) __dma_request_channel(&(mask), x, y)
+static inline struct dma_chan
+*dma_request_slave_channel_compat(dma_cap_mask_t mask, dma_filter_fn fn,
+ void *fn_param, struct device *dev,
+ char *name)
+{
+ if (dev->of_node)
+ return dma_request_slave_channel(dev, name);
+ else
+ return dma_request_channel(mask, fn, fn_param);
+}
/* --- Helper iov-locking functions --- */
--
1.7.9.5
Fix build on OMAP, the irqs are undefined on AM33xx.
These error interrupt handlers were hardcoded as disabled
so since they are unused code, simply remove them.
Signed-off-by: Matt Porter <[email protected]>
---
arch/arm/common/edma.c | 37 -------------------------------------
1 file changed, 37 deletions(-)
diff --git a/arch/arm/common/edma.c b/arch/arm/common/edma.c
index 4411087..a3d189d 100644
--- a/arch/arm/common/edma.c
+++ b/arch/arm/common/edma.c
@@ -494,26 +494,6 @@ static irqreturn_t dma_ccerr_handler(int irq, void *data)
return IRQ_HANDLED;
}
-/******************************************************************************
- *
- * Transfer controller error interrupt handlers
- *
- *****************************************************************************/
-
-#define tc_errs_handled false /* disabled as long as they're NOPs */
-
-static irqreturn_t dma_tc0err_handler(int irq, void *data)
-{
- dev_dbg(data, "dma_tc0err_handler\n");
- return IRQ_HANDLED;
-}
-
-static irqreturn_t dma_tc1err_handler(int irq, void *data)
-{
- dev_dbg(data, "dma_tc1err_handler\n");
- return IRQ_HANDLED;
-}
-
static int reserve_contiguous_slots(int ctlr, unsigned int id,
unsigned int num_slots,
unsigned int start_slot)
@@ -1538,23 +1518,6 @@ static int __init edma_probe(struct platform_device *pdev)
arch_num_cc++;
}
- if (tc_errs_handled) {
- status = request_irq(IRQ_TCERRINT0, dma_tc0err_handler, 0,
- "edma_tc0", &pdev->dev);
- if (status < 0) {
- dev_dbg(&pdev->dev, "request_irq %d failed --> %d\n",
- IRQ_TCERRINT0, status);
- return status;
- }
- status = request_irq(IRQ_TCERRINT, dma_tc1err_handler, 0,
- "edma_tc1", &pdev->dev);
- if (status < 0) {
- dev_dbg(&pdev->dev, "request_irq %d --> %d\n",
- IRQ_TCERRINT, status);
- return status;
- }
- }
-
return 0;
fail:
--
1.7.9.5
Adds AM33XX EDMA support to the am33xx.dtsi as documented in
Documentation/devicetree/bindings/dma/ti-edma.txt
Signed-off-by: Matt Porter <[email protected]>
---
arch/arm/boot/dts/am33xx.dtsi | 30 ++++++++++++++++++++++++++++++
1 file changed, 30 insertions(+)
diff --git a/arch/arm/boot/dts/am33xx.dtsi b/arch/arm/boot/dts/am33xx.dtsi
index bb31bff..2ddb31b 100644
--- a/arch/arm/boot/dts/am33xx.dtsi
+++ b/arch/arm/boot/dts/am33xx.dtsi
@@ -62,6 +62,36 @@
reg = <0x48200000 0x1000>;
};
+ edma: edma@49000000 {
+ compatible = "ti,edma3";
+ ti,hwmods = "tpcc", "tptc0", "tptc1", "tptc2";
+ reg = <0x49000000 0x10000>;
+ interrupt-parent = <&intc>;
+ interrupts = <12 13 14>;
+ #dma-cells = <1>;
+ dma-channels = <64>;
+ ti,edma-regions = <4>;
+ ti,edma-slots = <256>;
+ ti,edma-reserved-channels = <0 2
+ 14 2
+ 26 6
+ 48 4
+ 56 8>;
+ ti,edma-reserved-slots = <0 2
+ 14 2
+ 26 6
+ 48 4
+ 56 8
+ 64 127>;
+ ti,edma-queue-tc-map = <0 0
+ 1 1
+ 2 2>;
+ ti,edma-queue-priority-map = <0 0
+ 1 1
+ 2 2>;
+ ti,edma-default-queue = <0>;
+ };
+
gpio1: gpio@44e07000 {
compatible = "ti,omap4-gpio";
ti,hwmods = "gpio1";
--
1.7.9.5
The binding definition is based on the generic DMA controller
binding.
Signed-off-by: Matt Porter <[email protected]>
---
Documentation/devicetree/bindings/dma/ti-edma.txt | 49 +++++++++++++++++++++
1 file changed, 49 insertions(+)
create mode 100644 Documentation/devicetree/bindings/dma/ti-edma.txt
diff --git a/Documentation/devicetree/bindings/dma/ti-edma.txt b/Documentation/devicetree/bindings/dma/ti-edma.txt
new file mode 100644
index 0000000..06402eb
--- /dev/null
+++ b/Documentation/devicetree/bindings/dma/ti-edma.txt
@@ -0,0 +1,49 @@
+TI EDMA
+
+Required properties:
+- compatible : "ti,edma3"
+- ti,hwmods: Name of the hwmods associated to the EDMA
+- ti,edma-regions: Number of regions
+- ti,edma-slots: Number of slots
+- ti,edma-queue-tc-map: List of transfer control to queue mappings
+- ti,edma-queue-priority-map: List of queue priority mappings
+- ti,edma-default-queue: Default queue value
+
+Optional properties:
+- ti,edma-reserved-channels: List of reserved channel regions
+- ti,edma-reserved-slots: List of reserved slot regions
+
+Example:
+
+edma: edma@49000000 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <0x49000000 0x10000>;
+ interrupt-parent = <&intc>;
+ interrupts = <12 13 14>;
+ compatible = "ti,edma3";
+ ti,hwmods = "tpcc", "tptc0", "tptc1", "tptc2";
+ #dma-cells = <1>;
+ dma-channels = <64>;
+ ti,edma-regions = <4>;
+ ti,edma-slots = <256>;
+ ti,edma-reserved-channels = <0 2
+ 14 2
+ 26 6
+ 48 4
+ 56 8>;
+ ti,edma-reserved-slots = <0 2
+ 14 2
+ 26 6
+ 48 4
+ 56 8
+ 64 127>;
+ ti,edma-queue-tc-map = <0 0
+ 1 1
+ 2 2>;
+ ti,edma-queue-priority-map = <0 0
+ 1 1
+ 2 2>;
+ ti,edma-default-queue = <0>;
+};
+
--
1.7.9.5
Move mach-davinci/dma.c to common/edma.c so it can be used
by OMAP (specifically AM33xx) as well. This just moves the
private EDMA API but does not support OMAP.
Signed-off-by: Matt Porter <[email protected]>
---
arch/arm/Kconfig | 1 +
arch/arm/common/Kconfig | 3 +
arch/arm/common/Makefile | 1 +
arch/arm/{mach-davinci/dma.c => common/edma.c} | 2 +-
arch/arm/mach-davinci/Makefile | 2 +-
arch/arm/mach-davinci/board-tnetv107x-evm.c | 2 +-
arch/arm/mach-davinci/davinci.h | 2 +-
arch/arm/mach-davinci/devices-tnetv107x.c | 2 +-
arch/arm/mach-davinci/devices.c | 7 +-
arch/arm/mach-davinci/dm355.c | 2 +-
arch/arm/mach-davinci/dm365.c | 2 +-
arch/arm/mach-davinci/dm644x.c | 2 +-
arch/arm/mach-davinci/dm646x.c | 2 +-
arch/arm/mach-davinci/include/mach/da8xx.h | 2 +-
arch/arm/mach-davinci/include/mach/edma.h | 267 ------------------------
arch/arm/plat-omap/Kconfig | 1 +
drivers/dma/edma.c | 2 +-
drivers/mmc/host/davinci_mmc.c | 1 +
include/linux/mfd/davinci_voicecodec.h | 3 +-
include/linux/platform_data/edma.h | 198 ++++++++++++++++++
include/linux/platform_data/spi-davinci.h | 2 +-
sound/soc/davinci/davinci-evm.c | 1 +
sound/soc/davinci/davinci-pcm.c | 1 +
sound/soc/davinci/davinci-pcm.h | 2 +-
sound/soc/davinci/davinci-sffsdr.c | 6 +-
25 files changed, 228 insertions(+), 288 deletions(-)
rename arch/arm/{mach-davinci/dma.c => common/edma.c} (99%)
delete mode 100644 arch/arm/mach-davinci/include/mach/edma.h
create mode 100644 include/linux/platform_data/edma.h
diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig
index 767aae8..56b7b23 100644
--- a/arch/arm/Kconfig
+++ b/arch/arm/Kconfig
@@ -911,6 +911,7 @@ config ARCH_DAVINCI
select GENERIC_IRQ_CHIP
select ARCH_HAS_HOLES_MEMORYMODEL
select NEED_MACH_GPIO_H
+ select TI_PRIV_EDMA
help
Support for TI's DaVinci platform.
diff --git a/arch/arm/common/Kconfig b/arch/arm/common/Kconfig
index 283fa1d..bd87838 100644
--- a/arch/arm/common/Kconfig
+++ b/arch/arm/common/Kconfig
@@ -40,3 +40,6 @@ config SHARP_PARAM
config SHARP_SCOOP
bool
+
+config TI_PRIV_EDMA
+ bool
diff --git a/arch/arm/common/Makefile b/arch/arm/common/Makefile
index e8a4e58..d09a39b 100644
--- a/arch/arm/common/Makefile
+++ b/arch/arm/common/Makefile
@@ -13,3 +13,4 @@ obj-$(CONFIG_SHARP_PARAM) += sharpsl_param.o
obj-$(CONFIG_SHARP_SCOOP) += scoop.o
obj-$(CONFIG_PCI_HOST_ITE8152) += it8152.o
obj-$(CONFIG_ARM_TIMER_SP804) += timer-sp.o
+obj-$(CONFIG_TI_PRIV_EDMA) += edma.o
diff --git a/arch/arm/mach-davinci/dma.c b/arch/arm/common/edma.c
similarity index 99%
rename from arch/arm/mach-davinci/dma.c
rename to arch/arm/common/edma.c
index a685e97..4411087 100644
--- a/arch/arm/mach-davinci/dma.c
+++ b/arch/arm/common/edma.c
@@ -25,7 +25,7 @@
#include <linux/io.h>
#include <linux/slab.h>
-#include <mach/edma.h>
+#include <linux/platform_data/edma.h>
/* Offsets matching "struct edmacc_param" */
#define PARM_OPT 0x00
diff --git a/arch/arm/mach-davinci/Makefile b/arch/arm/mach-davinci/Makefile
index 2227eff..97c639e 100644
--- a/arch/arm/mach-davinci/Makefile
+++ b/arch/arm/mach-davinci/Makefile
@@ -5,7 +5,7 @@
# Common objects
obj-y := time.o clock.o serial.o psc.o \
- dma.o usb.o common.o sram.o aemif.o
+ usb.o common.o sram.o aemif.o
obj-$(CONFIG_DAVINCI_MUX) += mux.o
diff --git a/arch/arm/mach-davinci/board-tnetv107x-evm.c b/arch/arm/mach-davinci/board-tnetv107x-evm.c
index be30997..86f55ba 100644
--- a/arch/arm/mach-davinci/board-tnetv107x-evm.c
+++ b/arch/arm/mach-davinci/board-tnetv107x-evm.c
@@ -26,12 +26,12 @@
#include <linux/input.h>
#include <linux/input/matrix_keypad.h>
#include <linux/spi/spi.h>
+#include <linux/platform_data/edma.h>
#include <asm/mach/arch.h>
#include <asm/mach-types.h>
#include <mach/irqs.h>
-#include <mach/edma.h>
#include <mach/mux.h>
#include <mach/cp_intc.h>
#include <mach/tnetv107x.h>
diff --git a/arch/arm/mach-davinci/davinci.h b/arch/arm/mach-davinci/davinci.h
index 12d544b..d26a6bc 100644
--- a/arch/arm/mach-davinci/davinci.h
+++ b/arch/arm/mach-davinci/davinci.h
@@ -23,9 +23,9 @@
#include <linux/platform_device.h>
#include <linux/spi/spi.h>
#include <linux/platform_data/davinci_asp.h>
+#include <linux/platform_data/edma.h>
#include <linux/platform_data/keyscan-davinci.h>
#include <mach/hardware.h>
-#include <mach/edma.h>
#include <media/davinci/vpfe_capture.h>
#include <media/davinci/vpif_types.h>
diff --git a/arch/arm/mach-davinci/devices-tnetv107x.c b/arch/arm/mach-davinci/devices-tnetv107x.c
index 29b17f7..59efd7f 100644
--- a/arch/arm/mach-davinci/devices-tnetv107x.c
+++ b/arch/arm/mach-davinci/devices-tnetv107x.c
@@ -18,10 +18,10 @@
#include <linux/dma-mapping.h>
#include <linux/clk.h>
#include <linux/slab.h>
+#include <linux/platform_data/edma.h>
#include <mach/common.h>
#include <mach/irqs.h>
-#include <mach/edma.h>
#include <mach/tnetv107x.h>
#include "clock.h"
diff --git a/arch/arm/mach-davinci/devices.c b/arch/arm/mach-davinci/devices.c
index 4c48a36..f45d591 100644
--- a/arch/arm/mach-davinci/devices.c
+++ b/arch/arm/mach-davinci/devices.c
@@ -19,9 +19,10 @@
#include <mach/irqs.h>
#include <mach/cputype.h>
#include <mach/mux.h>
-#include <mach/edma.h>
#include <linux/platform_data/mmc-davinci.h>
#include <mach/time.h>
+#include <linux/platform_data/edma.h>
+
#include "davinci.h"
#include "clock.h"
@@ -141,10 +142,10 @@ static struct resource mmcsd0_resources[] = {
},
/* DMA channels: RX, then TX */
{
- .start = EDMA_CTLR_CHAN(0, DAVINCI_DMA_MMCRXEVT),
+ .start = EDMA_CTLR_CHAN(0, 26),
.flags = IORESOURCE_DMA,
}, {
- .start = EDMA_CTLR_CHAN(0, DAVINCI_DMA_MMCTXEVT),
+ .start = EDMA_CTLR_CHAN(0, 27),
.flags = IORESOURCE_DMA,
},
};
diff --git a/arch/arm/mach-davinci/dm355.c b/arch/arm/mach-davinci/dm355.c
index a255434..b165c27 100644
--- a/arch/arm/mach-davinci/dm355.c
+++ b/arch/arm/mach-davinci/dm355.c
@@ -19,7 +19,6 @@
#include <asm/mach/map.h>
#include <mach/cputype.h>
-#include <mach/edma.h>
#include <mach/psc.h>
#include <mach/mux.h>
#include <mach/irqs.h>
@@ -28,6 +27,7 @@
#include <mach/common.h>
#include <linux/platform_data/spi-davinci.h>
#include <mach/gpio-davinci.h>
+#include <linux/platform_data/edma.h>
#include "davinci.h"
#include "clock.h"
diff --git a/arch/arm/mach-davinci/dm365.c b/arch/arm/mach-davinci/dm365.c
index b680c83..a611716 100644
--- a/arch/arm/mach-davinci/dm365.c
+++ b/arch/arm/mach-davinci/dm365.c
@@ -18,11 +18,11 @@
#include <linux/platform_device.h>
#include <linux/dma-mapping.h>
#include <linux/spi/spi.h>
+#include <linux/platform_data/edma.h>
#include <asm/mach/map.h>
#include <mach/cputype.h>
-#include <mach/edma.h>
#include <mach/psc.h>
#include <mach/mux.h>
#include <mach/irqs.h>
diff --git a/arch/arm/mach-davinci/dm644x.c b/arch/arm/mach-davinci/dm644x.c
index 0755d46..0949dc4 100644
--- a/arch/arm/mach-davinci/dm644x.c
+++ b/arch/arm/mach-davinci/dm644x.c
@@ -12,11 +12,11 @@
#include <linux/clk.h>
#include <linux/serial_8250.h>
#include <linux/platform_device.h>
+#include <linux/platform_data/edma.h>
#include <asm/mach/map.h>
#include <mach/cputype.h>
-#include <mach/edma.h>
#include <mach/irqs.h>
#include <mach/psc.h>
#include <mach/mux.h>
diff --git a/arch/arm/mach-davinci/dm646x.c b/arch/arm/mach-davinci/dm646x.c
index 97c0f8e..08f9dab 100644
--- a/arch/arm/mach-davinci/dm646x.c
+++ b/arch/arm/mach-davinci/dm646x.c
@@ -13,11 +13,11 @@
#include <linux/clk.h>
#include <linux/serial_8250.h>
#include <linux/platform_device.h>
+#include <linux/platform_data/edma.h>
#include <asm/mach/map.h>
#include <mach/cputype.h>
-#include <mach/edma.h>
#include <mach/irqs.h>
#include <mach/psc.h>
#include <mach/mux.h>
diff --git a/arch/arm/mach-davinci/include/mach/da8xx.h b/arch/arm/mach-davinci/include/mach/da8xx.h
index c9ee723..750936a 100644
--- a/arch/arm/mach-davinci/include/mach/da8xx.h
+++ b/arch/arm/mach-davinci/include/mach/da8xx.h
@@ -19,8 +19,8 @@
#include <linux/platform_data/davinci_asp.h>
#include <mach/serial.h>
-#include <mach/edma.h>
#include <mach/pm.h>
+#include <linux/platform_data/edma.h>
#include <linux/platform_data/i2c-davinci.h>
#include <linux/platform_data/mmc-davinci.h>
#include <linux/platform_data/usb-davinci.h>
diff --git a/arch/arm/mach-davinci/include/mach/edma.h b/arch/arm/mach-davinci/include/mach/edma.h
deleted file mode 100644
index 7e84c90..0000000
--- a/arch/arm/mach-davinci/include/mach/edma.h
+++ /dev/null
@@ -1,267 +0,0 @@
-/*
- * TI DAVINCI dma definitions
- *
- * Copyright (C) 2006-2009 Texas Instruments.
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License as published by the
- * Free Software Foundation; either version 2 of the License, or (at your
- * option) any later version.
- *
- * THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED
- * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
- * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN
- * NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,
- * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
- * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF
- * USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
- * ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
- * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
- * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
- *
- * You should have received a copy of the GNU General Public License along
- * with this program; if not, write to the Free Software Foundation, Inc.,
- * 675 Mass Ave, Cambridge, MA 02139, USA.
- *
- */
-
-/*
- * This EDMA3 programming framework exposes two basic kinds of resource:
- *
- * Channel Triggers transfers, usually from a hardware event but
- * also manually or by "chaining" from DMA completions.
- * Each channel is coupled to a Parameter RAM (PaRAM) slot.
- *
- * Slot Each PaRAM slot holds a DMA transfer descriptor (PaRAM
- * "set"), source and destination addresses, a link to a
- * next PaRAM slot (if any), options for the transfer, and
- * instructions for updating those addresses. There are
- * more than twice as many slots as event channels.
- *
- * Each PaRAM set describes a sequence of transfers, either for one large
- * buffer or for several discontiguous smaller buffers. An EDMA transfer
- * is driven only from a channel, which performs the transfers specified
- * in its PaRAM slot until there are no more transfers. When that last
- * transfer completes, the "link" field may be used to reload the channel's
- * PaRAM slot with a new transfer descriptor.
- *
- * The EDMA Channel Controller (CC) maps requests from channels into physical
- * Transfer Controller (TC) requests when the channel triggers (by hardware
- * or software events, or by chaining). The two physical DMA channels provided
- * by the TCs are thus shared by many logical channels.
- *
- * DaVinci hardware also has a "QDMA" mechanism which is not currently
- * supported through this interface. (DSP firmware uses it though.)
- */
-
-#ifndef EDMA_H_
-#define EDMA_H_
-
-/* PaRAM slots are laid out like this */
-struct edmacc_param {
- unsigned int opt;
- unsigned int src;
- unsigned int a_b_cnt;
- unsigned int dst;
- unsigned int src_dst_bidx;
- unsigned int link_bcntrld;
- unsigned int src_dst_cidx;
- unsigned int ccnt;
-};
-
-#define CCINT0_INTERRUPT 16
-#define CCERRINT_INTERRUPT 17
-#define TCERRINT0_INTERRUPT 18
-#define TCERRINT1_INTERRUPT 19
-
-/* fields in edmacc_param.opt */
-#define SAM BIT(0)
-#define DAM BIT(1)
-#define SYNCDIM BIT(2)
-#define STATIC BIT(3)
-#define EDMA_FWID (0x07 << 8)
-#define TCCMODE BIT(11)
-#define EDMA_TCC(t) ((t) << 12)
-#define TCINTEN BIT(20)
-#define ITCINTEN BIT(21)
-#define TCCHEN BIT(22)
-#define ITCCHEN BIT(23)
-
-#define TRWORD (0x7<<2)
-#define PAENTRY (0x1ff<<5)
-
-/* Drivers should avoid using these symbolic names for dm644x
- * channels, and use platform_device IORESOURCE_DMA resources
- * instead. (Other DaVinci chips have different peripherals
- * and thus have different DMA channel mappings.)
- */
-#define DAVINCI_DMA_MCBSP_TX 2
-#define DAVINCI_DMA_MCBSP_RX 3
-#define DAVINCI_DMA_VPSS_HIST 4
-#define DAVINCI_DMA_VPSS_H3A 5
-#define DAVINCI_DMA_VPSS_PRVU 6
-#define DAVINCI_DMA_VPSS_RSZ 7
-#define DAVINCI_DMA_IMCOP_IMXINT 8
-#define DAVINCI_DMA_IMCOP_VLCDINT 9
-#define DAVINCI_DMA_IMCO_PASQINT 10
-#define DAVINCI_DMA_IMCOP_DSQINT 11
-#define DAVINCI_DMA_SPI_SPIX 16
-#define DAVINCI_DMA_SPI_SPIR 17
-#define DAVINCI_DMA_UART0_URXEVT0 18
-#define DAVINCI_DMA_UART0_UTXEVT0 19
-#define DAVINCI_DMA_UART1_URXEVT1 20
-#define DAVINCI_DMA_UART1_UTXEVT1 21
-#define DAVINCI_DMA_UART2_URXEVT2 22
-#define DAVINCI_DMA_UART2_UTXEVT2 23
-#define DAVINCI_DMA_MEMSTK_MSEVT 24
-#define DAVINCI_DMA_MMCRXEVT 26
-#define DAVINCI_DMA_MMCTXEVT 27
-#define DAVINCI_DMA_I2C_ICREVT 28
-#define DAVINCI_DMA_I2C_ICXEVT 29
-#define DAVINCI_DMA_GPIO_GPINT0 32
-#define DAVINCI_DMA_GPIO_GPINT1 33
-#define DAVINCI_DMA_GPIO_GPINT2 34
-#define DAVINCI_DMA_GPIO_GPINT3 35
-#define DAVINCI_DMA_GPIO_GPINT4 36
-#define DAVINCI_DMA_GPIO_GPINT5 37
-#define DAVINCI_DMA_GPIO_GPINT6 38
-#define DAVINCI_DMA_GPIO_GPINT7 39
-#define DAVINCI_DMA_GPIO_GPBNKINT0 40
-#define DAVINCI_DMA_GPIO_GPBNKINT1 41
-#define DAVINCI_DMA_GPIO_GPBNKINT2 42
-#define DAVINCI_DMA_GPIO_GPBNKINT3 43
-#define DAVINCI_DMA_GPIO_GPBNKINT4 44
-#define DAVINCI_DMA_TIMER0_TINT0 48
-#define DAVINCI_DMA_TIMER1_TINT1 49
-#define DAVINCI_DMA_TIMER2_TINT2 50
-#define DAVINCI_DMA_TIMER3_TINT3 51
-#define DAVINCI_DMA_PWM0 52
-#define DAVINCI_DMA_PWM1 53
-#define DAVINCI_DMA_PWM2 54
-
-/* DA830 specific EDMA3 information */
-#define EDMA_DA830_NUM_DMACH 32
-#define EDMA_DA830_NUM_TCC 32
-#define EDMA_DA830_NUM_PARAMENTRY 128
-#define EDMA_DA830_NUM_EVQUE 2
-#define EDMA_DA830_NUM_TC 2
-#define EDMA_DA830_CHMAP_EXIST 0
-#define EDMA_DA830_NUM_REGIONS 4
-#define DA830_DMACH2EVENT_MAP0 0x000FC03Fu
-#define DA830_DMACH2EVENT_MAP1 0x00000000u
-#define DA830_EDMA_ARM_OWN 0x30FFCCFFu
-
-/*ch_status paramater of callback function possible values*/
-#define DMA_COMPLETE 1
-#define DMA_CC_ERROR 2
-#define DMA_TC1_ERROR 3
-#define DMA_TC2_ERROR 4
-
-enum address_mode {
- INCR = 0,
- FIFO = 1
-};
-
-enum fifo_width {
- W8BIT = 0,
- W16BIT = 1,
- W32BIT = 2,
- W64BIT = 3,
- W128BIT = 4,
- W256BIT = 5
-};
-
-enum dma_event_q {
- EVENTQ_0 = 0,
- EVENTQ_1 = 1,
- EVENTQ_2 = 2,
- EVENTQ_3 = 3,
- EVENTQ_DEFAULT = -1
-};
-
-enum sync_dimension {
- ASYNC = 0,
- ABSYNC = 1
-};
-
-#define EDMA_CTLR_CHAN(ctlr, chan) (((ctlr) << 16) | (chan))
-#define EDMA_CTLR(i) ((i) >> 16)
-#define EDMA_CHAN_SLOT(i) ((i) & 0xffff)
-
-#define EDMA_CHANNEL_ANY -1 /* for edma_alloc_channel() */
-#define EDMA_SLOT_ANY -1 /* for edma_alloc_slot() */
-#define EDMA_CONT_PARAMS_ANY 1001
-#define EDMA_CONT_PARAMS_FIXED_EXACT 1002
-#define EDMA_CONT_PARAMS_FIXED_NOT_EXACT 1003
-
-#define EDMA_MAX_CC 2
-
-/* alloc/free DMA channels and their dedicated parameter RAM slots */
-int edma_alloc_channel(int channel,
- void (*callback)(unsigned channel, u16 ch_status, void *data),
- void *data, enum dma_event_q);
-void edma_free_channel(unsigned channel);
-
-/* alloc/free parameter RAM slots */
-int edma_alloc_slot(unsigned ctlr, int slot);
-void edma_free_slot(unsigned slot);
-
-/* alloc/free a set of contiguous parameter RAM slots */
-int edma_alloc_cont_slots(unsigned ctlr, unsigned int id, int slot, int count);
-int edma_free_cont_slots(unsigned slot, int count);
-
-/* calls that operate on part of a parameter RAM slot */
-void edma_set_src(unsigned slot, dma_addr_t src_port,
- enum address_mode mode, enum fifo_width);
-void edma_set_dest(unsigned slot, dma_addr_t dest_port,
- enum address_mode mode, enum fifo_width);
-void edma_get_position(unsigned slot, dma_addr_t *src, dma_addr_t *dst);
-void edma_set_src_index(unsigned slot, s16 src_bidx, s16 src_cidx);
-void edma_set_dest_index(unsigned slot, s16 dest_bidx, s16 dest_cidx);
-void edma_set_transfer_params(unsigned slot, u16 acnt, u16 bcnt, u16 ccnt,
- u16 bcnt_rld, enum sync_dimension sync_mode);
-void edma_link(unsigned from, unsigned to);
-void edma_unlink(unsigned from);
-
-/* calls that operate on an entire parameter RAM slot */
-void edma_write_slot(unsigned slot, const struct edmacc_param *params);
-void edma_read_slot(unsigned slot, struct edmacc_param *params);
-
-/* channel control operations */
-int edma_start(unsigned channel);
-void edma_stop(unsigned channel);
-void edma_clean_channel(unsigned channel);
-void edma_clear_event(unsigned channel);
-void edma_pause(unsigned channel);
-void edma_resume(unsigned channel);
-
-struct edma_rsv_info {
-
- const s16 (*rsv_chans)[2];
- const s16 (*rsv_slots)[2];
-};
-
-/* platform_data for EDMA driver */
-struct edma_soc_info {
-
- /* how many dma resources of each type */
- unsigned n_channel;
- unsigned n_region;
- unsigned n_slot;
- unsigned n_tc;
- unsigned n_cc;
- /*
- * Default queue is expected to be a low-priority queue.
- * This way, long transfers on the default queue started
- * by the codec engine will not cause audio defects.
- */
- enum dma_event_q default_queue;
-
- /* Resource reservation for other cores */
- struct edma_rsv_info *rsv;
-
- const s8 (*queue_tc_mapping)[2];
- const s8 (*queue_priority_mapping)[2];
-};
-
-#endif
diff --git a/arch/arm/plat-omap/Kconfig b/arch/arm/plat-omap/Kconfig
index c9d1c36..2aa70cd 100644
--- a/arch/arm/plat-omap/Kconfig
+++ b/arch/arm/plat-omap/Kconfig
@@ -29,6 +29,7 @@ config ARCH_OMAP2PLUS
select OMAP_DM_TIMER
select USE_OF
select PROC_DEVICETREE if PROC_FS
+ select TI_PRIV_EDMA
help
"Systems based on OMAP2, OMAP3, OMAP4 or OMAP5"
diff --git a/drivers/dma/edma.c b/drivers/dma/edma.c
index fdcf079..47ba7bf 100644
--- a/drivers/dma/edma.c
+++ b/drivers/dma/edma.c
@@ -24,7 +24,7 @@
#include <linux/slab.h>
#include <linux/spinlock.h>
-#include <mach/edma.h>
+#include <linux/platform_data/edma.h>
#include "dmaengine.h"
#include "virt-dma.h"
diff --git a/drivers/mmc/host/davinci_mmc.c b/drivers/mmc/host/davinci_mmc.c
index 2063677..f5d46ea 100644
--- a/drivers/mmc/host/davinci_mmc.c
+++ b/drivers/mmc/host/davinci_mmc.c
@@ -35,6 +35,7 @@
#include <linux/edma.h>
#include <linux/mmc/mmc.h>
+#include <linux/platform_data/edma.h>
#include <linux/platform_data/mmc-davinci.h>
/*
diff --git a/include/linux/mfd/davinci_voicecodec.h b/include/linux/mfd/davinci_voicecodec.h
index 0ab6132..7dd6524 100644
--- a/include/linux/mfd/davinci_voicecodec.h
+++ b/include/linux/mfd/davinci_voicecodec.h
@@ -26,8 +26,7 @@
#include <linux/kernel.h>
#include <linux/platform_device.h>
#include <linux/mfd/core.h>
-
-#include <mach/edma.h>
+#include <linux/platform_data/edma.h>
/*
* Register values.
diff --git a/include/linux/platform_data/edma.h b/include/linux/platform_data/edma.h
new file mode 100644
index 0000000..7396f0b3
--- /dev/null
+++ b/include/linux/platform_data/edma.h
@@ -0,0 +1,198 @@
+/*
+ * TI DAVINCI dma definitions
+ *
+ * Copyright (C) 2006-2009 Texas Instruments.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2 of the License, or (at your
+ * option) any later version.
+ *
+ * THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED
+ * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
+ * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN
+ * NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,
+ * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
+ * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF
+ * USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
+ * ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
+ * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ * You should have received a copy of the GNU General Public License along
+ * with this program; if not, write to the Free Software Foundation, Inc.,
+ * 675 Mass Ave, Cambridge, MA 02139, USA.
+ *
+ */
+
+/*
+ * This EDMA3 programming framework exposes two basic kinds of resource:
+ *
+ * Channel Triggers transfers, usually from a hardware event but
+ * also manually or by "chaining" from DMA completions.
+ * Each channel is coupled to a Parameter RAM (PaRAM) slot.
+ *
+ * Slot Each PaRAM slot holds a DMA transfer descriptor (PaRAM
+ * "set"), source and destination addresses, a link to a
+ * next PaRAM slot (if any), options for the transfer, and
+ * instructions for updating those addresses. There are
+ * more than twice as many slots as event channels.
+ *
+ * Each PaRAM set describes a sequence of transfers, either for one large
+ * buffer or for several discontiguous smaller buffers. An EDMA transfer
+ * is driven only from a channel, which performs the transfers specified
+ * in its PaRAM slot until there are no more transfers. When that last
+ * transfer completes, the "link" field may be used to reload the channel's
+ * PaRAM slot with a new transfer descriptor.
+ *
+ * The EDMA Channel Controller (CC) maps requests from channels into physical
+ * Transfer Controller (TC) requests when the channel triggers (by hardware
+ * or software events, or by chaining). The two physical DMA channels provided
+ * by the TCs are thus shared by many logical channels.
+ *
+ * DaVinci hardware also has a "QDMA" mechanism which is not currently
+ * supported through this interface. (DSP firmware uses it though.)
+ */
+
+#ifndef EDMA_H_
+#define EDMA_H_
+
+/* PaRAM slots are laid out like this */
+struct edmacc_param {
+ unsigned int opt;
+ unsigned int src;
+ unsigned int a_b_cnt;
+ unsigned int dst;
+ unsigned int src_dst_bidx;
+ unsigned int link_bcntrld;
+ unsigned int src_dst_cidx;
+ unsigned int ccnt;
+};
+
+/* fields in edmacc_param.opt */
+#define SAM BIT(0)
+#define DAM BIT(1)
+#define SYNCDIM BIT(2)
+#define STATIC BIT(3)
+#define EDMA_FWID (0x07 << 8)
+#define TCCMODE BIT(11)
+#define EDMA_TCC(t) ((t) << 12)
+#define TCINTEN BIT(20)
+#define ITCINTEN BIT(21)
+#define TCCHEN BIT(22)
+#define ITCCHEN BIT(23)
+
+/*ch_status paramater of callback function possible values*/
+#define DMA_COMPLETE 1
+#define DMA_CC_ERROR 2
+#define DMA_TC1_ERROR 3
+#define DMA_TC2_ERROR 4
+
+enum address_mode {
+ INCR = 0,
+ FIFO = 1
+};
+
+enum fifo_width {
+ W8BIT = 0,
+ W16BIT = 1,
+ W32BIT = 2,
+ W64BIT = 3,
+ W128BIT = 4,
+ W256BIT = 5
+};
+
+enum dma_event_q {
+ EVENTQ_0 = 0,
+ EVENTQ_1 = 1,
+ EVENTQ_2 = 2,
+ EVENTQ_3 = 3,
+ EVENTQ_DEFAULT = -1
+};
+
+enum sync_dimension {
+ ASYNC = 0,
+ ABSYNC = 1
+};
+
+#define EDMA_CTLR_CHAN(ctlr, chan) (((ctlr) << 16) | (chan))
+#define EDMA_CTLR(i) ((i) >> 16)
+#define EDMA_CHAN_SLOT(i) ((i) & 0xffff)
+
+#define EDMA_CHANNEL_ANY -1 /* for edma_alloc_channel() */
+#define EDMA_SLOT_ANY -1 /* for edma_alloc_slot() */
+#define EDMA_CONT_PARAMS_ANY 1001
+#define EDMA_CONT_PARAMS_FIXED_EXACT 1002
+#define EDMA_CONT_PARAMS_FIXED_NOT_EXACT 1003
+
+#define EDMA_MAX_CC 2
+
+/* alloc/free DMA channels and their dedicated parameter RAM slots */
+int edma_alloc_channel(int channel,
+ void (*callback)(unsigned channel, u16 ch_status, void *data),
+ void *data, enum dma_event_q);
+void edma_free_channel(unsigned channel);
+
+/* alloc/free parameter RAM slots */
+int edma_alloc_slot(unsigned ctlr, int slot);
+void edma_free_slot(unsigned slot);
+
+/* alloc/free a set of contiguous parameter RAM slots */
+int edma_alloc_cont_slots(unsigned ctlr, unsigned int id, int slot, int count);
+int edma_free_cont_slots(unsigned slot, int count);
+
+/* calls that operate on part of a parameter RAM slot */
+void edma_set_src(unsigned slot, dma_addr_t src_port,
+ enum address_mode mode, enum fifo_width);
+void edma_set_dest(unsigned slot, dma_addr_t dest_port,
+ enum address_mode mode, enum fifo_width);
+void edma_get_position(unsigned slot, dma_addr_t *src, dma_addr_t *dst);
+void edma_set_src_index(unsigned slot, s16 src_bidx, s16 src_cidx);
+void edma_set_dest_index(unsigned slot, s16 dest_bidx, s16 dest_cidx);
+void edma_set_transfer_params(unsigned slot, u16 acnt, u16 bcnt, u16 ccnt,
+ u16 bcnt_rld, enum sync_dimension sync_mode);
+void edma_link(unsigned from, unsigned to);
+void edma_unlink(unsigned from);
+
+/* calls that operate on an entire parameter RAM slot */
+void edma_write_slot(unsigned slot, const struct edmacc_param *params);
+void edma_read_slot(unsigned slot, struct edmacc_param *params);
+
+/* channel control operations */
+int edma_start(unsigned channel);
+void edma_stop(unsigned channel);
+void edma_clean_channel(unsigned channel);
+void edma_clear_event(unsigned channel);
+void edma_pause(unsigned channel);
+void edma_resume(unsigned channel);
+
+struct edma_rsv_info {
+
+ const s16 (*rsv_chans)[2];
+ const s16 (*rsv_slots)[2];
+};
+
+/* platform_data for EDMA driver */
+struct edma_soc_info {
+
+ /* how many dma resources of each type */
+ unsigned n_channel;
+ unsigned n_region;
+ unsigned n_slot;
+ unsigned n_tc;
+ unsigned n_cc;
+ /*
+ * Default queue is expected to be a low-priority queue.
+ * This way, long transfers on the default queue started
+ * by the codec engine will not cause audio defects.
+ */
+ enum dma_event_q default_queue;
+
+ /* Resource reservation for other cores */
+ struct edma_rsv_info *rsv;
+
+ const s8 (*queue_tc_mapping)[2];
+ const s8 (*queue_priority_mapping)[2];
+};
+
+#endif
diff --git a/include/linux/platform_data/spi-davinci.h b/include/linux/platform_data/spi-davinci.h
index 7af305b..8dc2fa47 100644
--- a/include/linux/platform_data/spi-davinci.h
+++ b/include/linux/platform_data/spi-davinci.h
@@ -19,7 +19,7 @@
#ifndef __ARCH_ARM_DAVINCI_SPI_H
#define __ARCH_ARM_DAVINCI_SPI_H
-#include <mach/edma.h>
+#include <linux/platform_data/edma.h>
#define SPI_INTERN_CS 0xFF
diff --git a/sound/soc/davinci/davinci-evm.c b/sound/soc/davinci/davinci-evm.c
index 6fac5af..44365d5 100644
--- a/sound/soc/davinci/davinci-evm.c
+++ b/sound/soc/davinci/davinci-evm.c
@@ -14,6 +14,7 @@
#include <linux/timer.h>
#include <linux/interrupt.h>
#include <linux/platform_device.h>
+#include <linux/platform_data/edma.h>
#include <linux/i2c.h>
#include <sound/core.h>
#include <sound/pcm.h>
diff --git a/sound/soc/davinci/davinci-pcm.c b/sound/soc/davinci/davinci-pcm.c
index 93ea3bf..c9d1b7a 100644
--- a/sound/soc/davinci/davinci-pcm.c
+++ b/sound/soc/davinci/davinci-pcm.c
@@ -16,6 +16,7 @@
#include <linux/slab.h>
#include <linux/dma-mapping.h>
#include <linux/kernel.h>
+#include <linux/platform_data/edma.h>
#include <sound/core.h>
#include <sound/pcm.h>
diff --git a/sound/soc/davinci/davinci-pcm.h b/sound/soc/davinci/davinci-pcm.h
index fc4d01c..deab6c3 100644
--- a/sound/soc/davinci/davinci-pcm.h
+++ b/sound/soc/davinci/davinci-pcm.h
@@ -13,7 +13,7 @@
#define _DAVINCI_PCM_H
#include <linux/platform_data/davinci_asp.h>
-#include <mach/edma.h>
+#include <linux/platform_data/edma.h>
struct davinci_pcm_dma_params {
int channel; /* sync dma channel ID */
diff --git a/sound/soc/davinci/davinci-sffsdr.c b/sound/soc/davinci/davinci-sffsdr.c
index 5be65aa..5345e63 100644
--- a/sound/soc/davinci/davinci-sffsdr.c
+++ b/sound/soc/davinci/davinci-sffsdr.c
@@ -17,6 +17,7 @@
#include <linux/timer.h>
#include <linux/interrupt.h>
#include <linux/platform_device.h>
+#include <linux/platform_data/edma.h>
#include <linux/gpio.h>
#include <sound/core.h>
#include <sound/pcm.h>
@@ -28,7 +29,6 @@
#include <asm/plat-sffsdr/sffsdr-fpga.h>
#endif
-#include <mach/edma.h>
#include "../codecs/pcm3008.h"
#include "davinci-pcm.h"
@@ -123,8 +123,8 @@ static struct resource sffsdr_snd_resources[] = {
};
static struct evm_snd_platform_data sffsdr_snd_data = {
- .tx_dma_ch = DAVINCI_DMA_MCBSP_TX,
- .rx_dma_ch = DAVINCI_DMA_MCBSP_RX,
+ .tx_dma_ch = 2,
+ .rx_dma_ch = 3,
};
static struct platform_device *sffsdr_snd_device;
--
1.7.9.5
On Thu, Oct 11, 2012 at 10:31:58PM +0100, Grant Likely wrote:
> Hey Matt,
>
> Do you know now similar are the EDMA engines on the am33xx and am389x? I've
> been working on am389x upstreaming and I'll try these patches out if it is
> the same engine.
Hi Grant,
It's the same one. am389x/ti816x and am387x/ti814x are part of the same
architectural family as am33xx. They've just never had a lot of upstream
support from TI. I heard rumors that you might be working with am389x
and I'm glad you're confirming that for me! ;)
The only differences between am33xx's implementation and the others is
going to be the number PaRAM slots, number of TCs, the channel mapping,
and then the crossbar mapping. As you can see from the TODO list, I
don't yet support the crossbar, but it'll be in the next version of this
series. The other items are already covered in the DT binding so it
should be straightforward to hook this up for am389x assuming your hwmod
and clock data is good for that part.
-Matt
Matt
On Fri, Oct 12, 2012 at 00:34:33, Porter, Matt wrote:
> AM33xx requires special handling in hsmmc initialization
> platform glue.
Since AM335x boots mainly through DT, do we still need this patch.
This function will be called in case of initializing hsmmc with
Platform data.
>
> Signed-off-by: Matt Porter <[email protected]>
> ---
> arch/arm/mach-omap2/hsmmc.c | 7 ++++---
> 1 file changed, 4 insertions(+), 3 deletions(-)
>
..snip..
..snip..
> name = "omap_hsmmc";
> res = snprintf(oh_name, MAX_OMAP_MMC_HWMOD_NAME_LEN,
> --
> 1.7.9.5
>
> _______________________________________________
> Davinci-linux-open-source mailing list
> [email protected]
> http://linux.davincidsp.com/mailman/listinfo/davinci-linux-open-source
>
Regards,
Gururaja
On Fri, Oct 12, 2012 at 09:17:53AM +0000, Hebbar, Gururaja wrote:
> Matt
>
> On Fri, Oct 12, 2012 at 00:34:33, Porter, Matt wrote:
> > AM33xx requires special handling in hsmmc initialization
> > platform glue.
>
> Since AM335x boots mainly through DT, do we still need this patch.
> This function will be called in case of initializing hsmmc with
> Platform data.
Yes, thanks, will drop in v3.
-Matt