From: "Rajanikanth H.V" <[email protected]>
This patch-set adds device tree binding for ab8500 battery-managed
devices. Removes the redundant platform structure maintained
across bm devices and implements common DT probe routine across all the
modules.
Test status:
a) Tested across 'legacy platform data' and DT binding support
a.1) ab8500_charger driver fails to get regulator in the
legacy platform mode.
b) Interrupt numbers assigned differs between legacy and FDT mode.
(a) Legacy platform_data Mode:
root@ME:/ cat /proc/interrupts
CPU0 CPU1
483: 0 0 ab8500 ab8500-ponkey-dbf
484: 0 0 ab8500 ab8500-ponkey-dbr
485: 0 0 ab8500 BATT_OVV
494: 0 1 ab8500
495: 0 0 ab8500 ab8500-rtc
501: 0 13 ab8500 NCONV_ACCU
503: 7 22 ab8500 CCEOC
504: 0 1 ab8500 CC_INT_CALIB
505: 0 0 ab8500 LOW_BAT_F
516: 0 34 ab8500 ab8500-gpadc
556: 0 0 ab8500 usb-link-status
(b) FDT Mode:
root@ME:/ cat /proc/interrupts
CPU0 CPU1
6: 0 0 ab8500 ab8500-ponkey-dbf
7: 0 0 ab8500 ab8500-ponkey-dbr
8: 0 0 ab8500 BATT_OVV
162: 0 7 ab8500 ab8500-gpadc
163: 0 1 ab8500
164: 0 0 ab8500 ab8500-rtc
484: 0 0 ab8500 usb-link-status
499: 0 4 ab8500 NCONV_ACCU
500: 0 0 ab8500 LOW_BAT_F
502: 0 1 ab8500 CC_INT_CALIB
503: 0 6 ab8500 CCEOC
c) Event handlers across bm-modules have been verified only
during 'battery discharge process' as 'battery charging process'
depends on ab8500-usb code
d) observed nested IRQ issue, log below:
root@ME:/ ------------[ cut here ]------------
WARNING: at /home/rhv00000/linaro_work/linux/kernel/irq/manage.c:635 irq_nested_primary_handler+0x20/0x28()
Primary handler called for nested irq 193
Modules linked in:
[<c0014884>] (unwind_backtrace+0x0/0xf8) from [<c001cbb4>] (warn_slowpath_common+0x4c/0x64)
[<c001cbb4>] (warn_slowpath_common+0x4c/0x64) from [<c001cc60>] (warn_slowpath_fmt+0x30/0x40)
[<c001cc60>] (warn_slowpath_fmt+0x30/0x40) from [<c0060f00>] (irq_nested_primary_handler+0x20/0x28)
[<c0060f00>] (irq_nested_primary_handler+0x20/0x28) from [<c0060b80>] (handle_irq_event_percpu+0x50/0x194)
[<c0060b80>] (handle_irq_event_percpu+0x50/0x194) from [<c0060d00>] (handle_irq_event+0x3c/0x5c)
[<c0060d00>] (handle_irq_event+0x3c/0x5c) from [<c0063034>] (handle_simple_irq+0x8c/0xc4)
[<c0063034>] (handle_simple_irq+0x8c/0xc4) from [<c0062d84>] (resend_irqs+0x40/0x68)
[<c0062d84>] (resend_irqs+0x40/0x68) from [<c00236d8>] (tasklet_action+0x84/0x120)
[<c00236d8>] (tasklet_action+0x84/0x120) from [<c0023ae4>] (__do_softirq+0xd8/0x198)
[<c0023ae4>] (__do_softirq+0xd8/0x198) from [<c0023ed4>] (irq_exit+0x90/0x98)
[<c0023ed4>] (irq_exit+0x90/0x98) from [<c000f2cc>] (handle_IRQ+0x50/0xb0)
[<c000f2cc>] (handle_IRQ+0x50/0xb0) from [<c00084f0>] (gic_handle_irq+0x28/0x5c)
[<c00084f0>] (gic_handle_irq+0x28/0x5c) from [<c000df80>] (__irq_svc+0x40/0x70)
Exception stack(0xebc5dea8 to 0xebc5def0)
dea0: c0f45340 ebc4cf00 00000000 1f321f32 eb196600 ebc4cf00
dec0: c05a3340 00000002 ebc4c600 00000000 eb1b2c00 ebc5df0c 00000000 ebc5def0
dee0: c0040c7c c02ca5ec 60000013 ffffffff
[<c000df80>] (__irq_svc+0x40/0x70) from [<c02ca5ec>] (_raw_spin_unlock_irq+0x28/0x50)
[<c02ca5ec>] (_raw_spin_unlock_irq+0x28/0x50) from [<c0040c7c>] (finish_task_switch+0x28/0xf0)
[<c0040c7c>] (finish_task_switch+0x28/0xf0) from [<c02c93f0>] (__schedule+0x254/0x548)
[<c02c93f0>] (__schedule+0x254/0x548) from [<c0040088>] (smpboot_thread_fn+0x11c/0x250)
[<c0040088>] (smpboot_thread_fn+0x11c/0x250) from [<c0037fc8>] (kthread+0xa4/0xb0)
[<c0037fc8>] (kthread+0xa4/0xb0) from [<c000e418>] (ret_from_fork+0x14/0x3c)
---[ end trace 1b75b31a2719ed1e ]---
Rajanikanth H.V (4):
mfd: ab8500: add devicetree support for fuelgauge
mfd: ab8500: add devicetree support for btemp
mfd: ab8500: add devicetree support for charger
mfd: ab8500: add devicetree support for chargalg
Documentation/devicetree/bindings/mfd/ab8500.txt | 27 +-
.../bindings/power_supply/ab8500/btemp.txt | 16 +
.../bindings/power_supply/ab8500/chargalg.txt | 16 +
.../bindings/power_supply/ab8500/charger.txt | 25 +
.../devicetree/bindings/power_supply/ab8500/fg.txt | 58 +++
arch/arm/boot/dts/dbx5x0.dtsi | 26 +
drivers/mfd/ab8500-core.c | 20 +
drivers/power/Kconfig | 6 -
drivers/power/Makefile | 2 +-
drivers/power/ab8500_bmdata.c | 514 ++++++++++++++++++++
drivers/power/ab8500_btemp.c | 75 +--
drivers/power/ab8500_charger.c | 83 ++--
drivers/power/ab8500_fg.c | 81 +--
drivers/power/abx500_chargalg.c | 57 ++-
include/linux/mfd/abx500.h | 34 +-
15 files changed, 879 insertions(+), 161 deletions(-)
create mode 100644 Documentation/devicetree/bindings/power_supply/ab8500/btemp.txt
create mode 100644 Documentation/devicetree/bindings/power_supply/ab8500/chargalg.txt
create mode 100644 Documentation/devicetree/bindings/power_supply/ab8500/charger.txt
create mode 100644 Documentation/devicetree/bindings/power_supply/ab8500/fg.txt
create mode 100644 drivers/power/ab8500_bmdata.c
--
1.7.10.4
From: "Rajanikanth H.V" <[email protected]>
- This patch adds device tree support for fuelgauge driver
- optimize bm devices platform_data usage and of_probe(...)
Note: of_probe() routine for battery managed devices is made
common across all bm drivers.
- test status:
- interrupt numbers assigned differs between legacy and FDT mode.
Signed-off-by: Rajanikanth H.V <[email protected]>
---
Documentation/devicetree/bindings/mfd/ab8500.txt | 7 +-
.../devicetree/bindings/power_supply/ab8500/fg.txt | 58 +++
arch/arm/boot/dts/dbx5x0.dtsi | 10 +
drivers/mfd/ab8500-core.c | 5 +
drivers/power/Makefile | 2 +-
drivers/power/ab8500_bmdata.c | 514 ++++++++++++++++++++
drivers/power/ab8500_btemp.c | 16 +-
drivers/power/ab8500_charger.c | 16 +-
drivers/power/ab8500_fg.c | 81 +--
drivers/power/abx500_chargalg.c | 7 +-
include/linux/mfd/abx500.h | 36 +-
11 files changed, 659 insertions(+), 93 deletions(-)
create mode 100644 Documentation/devicetree/bindings/power_supply/ab8500/fg.txt
create mode 100644 drivers/power/ab8500_bmdata.c
diff --git a/Documentation/devicetree/bindings/mfd/ab8500.txt b/Documentation/devicetree/bindings/mfd/ab8500.txt
index ce83c8d..6ca8d81 100644
--- a/Documentation/devicetree/bindings/mfd/ab8500.txt
+++ b/Documentation/devicetree/bindings/mfd/ab8500.txt
@@ -24,7 +24,12 @@ ab8500-bm : : : Battery Manager
ab8500-btemp : : : Battery Temperature
ab8500-charger : : : Battery Charger
ab8500-codec : : : Audio Codec
-ab8500-fg : : : Fuel Gauge
+ab8500-fg : : vddadc : Fuel Gauge
+ : NCONV_ACCU : : Accumulate N Sample Conversion
+ : BATT_OVV : : Battery Over Voltage
+ : LOW_BAT_F : : LOW threshold battery voltage
+ : CC_INT_CALIB : : Coulomb Counter Internal Calibration
+ : CCEOC : : Coulomb Counter End of Conversion
ab8500-gpadc : HW_CONV_END : vddadc : Analogue to Digital Converter
SW_CONV_END : :
ab8500-gpio : : : GPIO Controller
diff --git a/Documentation/devicetree/bindings/power_supply/ab8500/fg.txt b/Documentation/devicetree/bindings/power_supply/ab8500/fg.txt
new file mode 100644
index 0000000..ccafcb9
--- /dev/null
+++ b/Documentation/devicetree/bindings/power_supply/ab8500/fg.txt
@@ -0,0 +1,58 @@
+=== AB8500 Fuel Gauge Driver ===
+
+AB8500 is a mixed signal multimedia and power management
+device comprising: power and energy-management-module,
+wall-charger, usb-charger, audio codec, general purpose adc,
+tvout, clock management and sim card interface.
+
+Fuelgauge support is part of energy-management-modules, other
+components of this module are:
+main-charger, usb-combo-charger and battery-temperature-monitoring.
+
+The properties below describes the node for fuelgauge driver.
+
+Required Properties:
+- compatible = This shall be: "stericsson,ab8500-fg"
+- battery = Shall be battery specific information
+ Example:
+ ab8500_fg {
+ compatible = "stericsson,ab8500-fg";
+ battery = <&ab8500_battery>;
+ };
+
+dependent node:
+ ab8500_battery: ab8500_battery {
+ };
+ This node will provide information on 'thermistor interface' and
+ 'battery technology type' used.
+
+Properties of this node are:
+thermistor-on-batctrl:
+ A boolean value indicating thermistor interface to battery
+
+ Note:
+ 'btemp' and 'batctrl' are the pins interfaced for battery temperature
+ measurement, 'btemp' signal is used when NTC(negative temperature
+ coefficient) resister is interfaced external to battery whereas
+ 'batctrl' pin is used when NTC resister is internal to battery.
+
+ Example:
+ ab8500_battery: ab8500_battery {
+ thermistor-on-batctrl;
+ };
+ indicates: NTC resister is internal to battery, 'batctrl' is used
+ for thermal measurement.
+
+ The absence of property 'thermal-on-batctrl' indicates
+ NTC resister is external to battery and 'btemp' signal is used
+ for thermal measurement.
+
+battery-type:
+ This shall be the battery manufacturing technology type,
+ allowed types are:
+ "UNKNOWN" "NiMH" "LION" "LIPO" "LiFe" "NiCd" "LiMn"
+ Example:
+ ab8500_battery: ab8500_battery {
+ stericsson,battery-type = "LIPO";
+ }
+
diff --git a/arch/arm/boot/dts/dbx5x0.dtsi b/arch/arm/boot/dts/dbx5x0.dtsi
index 4b0e0ca..155cf53 100644
--- a/arch/arm/boot/dts/dbx5x0.dtsi
+++ b/arch/arm/boot/dts/dbx5x0.dtsi
@@ -352,6 +352,16 @@
vddadc-supply = <&ab8500_ldo_tvout_reg>;
};
+ ab8500_battery: ab8500_battery {
+ stericsson,battery-type = "LIPO";
+ thermistor-on-batctrl;
+ };
+
+ ab8500-fg {
+ compatible = "stericsson,ab8500-fg";
+ battery = <&ab8500_battery>;
+ };
+
ab8500-usb {
compatible = "stericsson,ab8500-usb";
interrupts = < 90 0x4
diff --git a/drivers/mfd/ab8500-core.c b/drivers/mfd/ab8500-core.c
index 1667c77..7c3017b 100644
--- a/drivers/mfd/ab8500-core.c
+++ b/drivers/mfd/ab8500-core.c
@@ -1051,8 +1051,13 @@ static struct mfd_cell __devinitdata ab8500_bm_devs[] = {
},
{
.name = "ab8500-fg",
+ .of_compatible = "stericsson,ab8500-fg",
.num_resources = ARRAY_SIZE(ab8500_fg_resources),
.resources = ab8500_fg_resources,
+#ifndef CONFIG_OF
+ .platform_data = &ab8500_bm_data,
+ .pdata_size = sizeof(ab8500_bm_data),
+#endif
},
{
.name = "ab8500-chargalg",
diff --git a/drivers/power/Makefile b/drivers/power/Makefile
index b949cf8..9103665 100644
--- a/drivers/power/Makefile
+++ b/drivers/power/Makefile
@@ -37,7 +37,7 @@ obj-$(CONFIG_CHARGER_88PM860X) += 88pm860x_charger.o
obj-$(CONFIG_CHARGER_PCF50633) += pcf50633-charger.o
obj-$(CONFIG_BATTERY_JZ4740) += jz4740-battery.o
obj-$(CONFIG_BATTERY_INTEL_MID) += intel_mid_battery.o
-obj-$(CONFIG_AB8500_BM) += ab8500_charger.o ab8500_btemp.o ab8500_fg.o abx500_chargalg.o
+obj-$(CONFIG_AB8500_BM) += ab8500_bmdata.o ab8500_charger.o ab8500_fg.o ab8500_btemp.o abx500_chargalg.o
obj-$(CONFIG_CHARGER_ISP1704) += isp1704_charger.o
obj-$(CONFIG_CHARGER_MAX8903) += max8903_charger.o
obj-$(CONFIG_CHARGER_TWL4030) += twl4030_charger.o
diff --git a/drivers/power/ab8500_bmdata.c b/drivers/power/ab8500_bmdata.c
new file mode 100644
index 0000000..0366270
--- /dev/null
+++ b/drivers/power/ab8500_bmdata.c
@@ -0,0 +1,514 @@
+#include <linux/export.h>
+#include <linux/power_supply.h>
+#include <linux/of.h>
+#include <linux/mfd/abx500.h>
+#include <linux/mfd/abx500/ab8500.h>
+#include <linux/mfd/abx500/ab8500-bm.h>
+
+/*
+ * These are the defined batteries that uses a NTC and ID resistor placed
+ * inside of the battery pack.
+ * Note that the res_to_temp table must be strictly sorted by falling resistance
+ * values to work.
+ */
+static struct abx500_res_to_temp temp_tbl_A_thermistor[] = {
+ {-5, 53407},
+ { 0, 48594},
+ { 5, 43804},
+ {10, 39188},
+ {15, 34870},
+ {20, 30933},
+ {25, 27422},
+ {30, 24347},
+ {35, 21694},
+ {40, 19431},
+ {45, 17517},
+ {50, 15908},
+ {55, 14561},
+ {60, 13437},
+ {65, 12500},
+};
+static struct abx500_res_to_temp temp_tbl_B_thermistor[] = {
+ {-5, 165418},
+ { 0, 159024},
+ { 5, 151921},
+ {10, 144300},
+ {15, 136424},
+ {20, 128565},
+ {25, 120978},
+ {30, 113875},
+ {35, 107397},
+ {40, 101629},
+ {45, 96592},
+ {50, 92253},
+ {55, 88569},
+ {60, 85461},
+ {65, 82869},
+};
+static struct abx500_v_to_cap cap_tbl_A_thermistor[] = {
+ {4171, 100},
+ {4114, 95},
+ {4009, 83},
+ {3947, 74},
+ {3907, 67},
+ {3863, 59},
+ {3830, 56},
+ {3813, 53},
+ {3791, 46},
+ {3771, 33},
+ {3754, 25},
+ {3735, 20},
+ {3717, 17},
+ {3681, 13},
+ {3664, 8},
+ {3651, 6},
+ {3635, 5},
+ {3560, 3},
+ {3408, 1},
+ {3247, 0},
+};
+static struct abx500_v_to_cap cap_tbl_B_thermistor[] = {
+ {4161, 100},
+ {4124, 98},
+ {4044, 90},
+ {4003, 85},
+ {3966, 80},
+ {3933, 75},
+ {3888, 67},
+ {3849, 60},
+ {3813, 55},
+ {3787, 47},
+ {3772, 30},
+ {3751, 25},
+ {3718, 20},
+ {3681, 16},
+ {3660, 14},
+ {3589, 10},
+ {3546, 7},
+ {3495, 4},
+ {3404, 2},
+ {3250, 0},
+};
+
+static struct abx500_v_to_cap cap_tbl[] = {
+ {4186, 100},
+ {4163, 99},
+ {4114, 95},
+ {4068, 90},
+ {3990, 80},
+ {3926, 70},
+ {3898, 65},
+ {3866, 60},
+ {3833, 55},
+ {3812, 50},
+ {3787, 40},
+ {3768, 30},
+ {3747, 25},
+ {3730, 20},
+ {3705, 15},
+ {3699, 14},
+ {3684, 12},
+ {3672, 9},
+ {3657, 7},
+ {3638, 6},
+ {3556, 4},
+ {3424, 2},
+ {3317, 1},
+ {3094, 0},
+};
+
+/*
+ * Note that the res_to_temp table must be strictly sorted by falling
+ * resistance values to work.
+ */
+static struct abx500_res_to_temp temp_tbl[] = {
+ {-5, 214834},
+ { 0, 162943},
+ { 5, 124820},
+ {10, 96520},
+ {15, 75306},
+ {20, 59254},
+ {25, 47000},
+ {30, 37566},
+ {35, 30245},
+ {40, 24520},
+ {45, 20010},
+ {50, 16432},
+ {55, 13576},
+ {60, 11280},
+ {65, 9425},
+};
+
+/*
+ * Note that the batres_vs_temp table must be strictly sorted by falling
+ * temperature values to work.
+ */
+struct batres_vs_temp temp_to_batres_tbl_thermistor[] = {
+ { 40, 120},
+ { 30, 135},
+ { 20, 165},
+ { 10, 230},
+ { 00, 325},
+ {-10, 445},
+ {-20, 595},
+};
+
+/*
+ * Note that the batres_vs_temp table must be strictly sorted by falling
+ * temperature values to work.
+ */
+struct batres_vs_temp temp_to_batres_tbl_ext_thermistor[] = {
+ { 60, 300},
+ { 30, 300},
+ { 20, 300},
+ { 10, 300},
+ { 00, 300},
+ {-10, 300},
+ {-20, 300},
+};
+
+/* battery resistance table for LI ION 9100 battery */
+struct batres_vs_temp temp_to_batres_tbl_9100[] = {
+ { 60, 180},
+ { 30, 180},
+ { 20, 180},
+ { 10, 180},
+ { 00, 180},
+ {-10, 180},
+ {-20, 180},
+};
+
+struct abx500_battery_type bat_type_thermistor[] = {
+[BATTERY_UNKNOWN] = {
+ /* First element always represent the UNKNOWN battery */
+ .name = POWER_SUPPLY_TECHNOLOGY_UNKNOWN,
+ .resis_high = 0,
+ .resis_low = 0,
+ .battery_resistance = 300,
+ .charge_full_design = 612,
+ .nominal_voltage = 3700,
+ .termination_vol = 4050,
+ .termination_curr = 200,
+ .recharge_vol = 3990,
+ .normal_cur_lvl = 400,
+ .normal_vol_lvl = 4100,
+ .maint_a_cur_lvl = 400,
+ .maint_a_vol_lvl = 4050,
+ .maint_a_chg_timer_h = 60,
+ .maint_b_cur_lvl = 400,
+ .maint_b_vol_lvl = 4000,
+ .maint_b_chg_timer_h = 200,
+ .low_high_cur_lvl = 300,
+ .low_high_vol_lvl = 4000,
+ .n_temp_tbl_elements = ARRAY_SIZE(temp_tbl),
+ .r_to_t_tbl = temp_tbl,
+ .n_v_cap_tbl_elements = ARRAY_SIZE(cap_tbl),
+ .v_to_cap_tbl = cap_tbl,
+ .n_batres_tbl_elements = ARRAY_SIZE(temp_to_batres_tbl_thermistor),
+ .batres_tbl = temp_to_batres_tbl_thermistor,
+},
+{
+ .name = POWER_SUPPLY_TECHNOLOGY_LIPO,
+ .resis_high = 53407,
+ .resis_low = 12500,
+ .battery_resistance = 300,
+ .charge_full_design = 900,
+ .nominal_voltage = 3600,
+ .termination_vol = 4150,
+ .termination_curr = 80,
+ .recharge_vol = 4130,
+ .normal_cur_lvl = 700,
+ .normal_vol_lvl = 4200,
+ .maint_a_cur_lvl = 600,
+ .maint_a_vol_lvl = 4150,
+ .maint_a_chg_timer_h = 60,
+ .maint_b_cur_lvl = 600,
+ .maint_b_vol_lvl = 4100,
+ .maint_b_chg_timer_h = 200,
+ .low_high_cur_lvl = 300,
+ .low_high_vol_lvl = 4000,
+ .n_temp_tbl_elements = ARRAY_SIZE(temp_tbl_A_thermistor),
+ .r_to_t_tbl = temp_tbl_A_thermistor,
+ .n_v_cap_tbl_elements = ARRAY_SIZE(cap_tbl_A_thermistor),
+ .v_to_cap_tbl = cap_tbl_A_thermistor,
+ .n_batres_tbl_elements = ARRAY_SIZE(temp_to_batres_tbl_thermistor),
+ .batres_tbl = temp_to_batres_tbl_thermistor,
+
+},
+{
+ .name = POWER_SUPPLY_TECHNOLOGY_LIPO,
+ .resis_high = 165418,
+ .resis_low = 82869,
+ .battery_resistance = 300,
+ .charge_full_design = 900,
+ .nominal_voltage = 3600,
+ .termination_vol = 4150,
+ .termination_curr = 80,
+ .recharge_vol = 4130,
+ .normal_cur_lvl = 700,
+ .normal_vol_lvl = 4200,
+ .maint_a_cur_lvl = 600,
+ .maint_a_vol_lvl = 4150,
+ .maint_a_chg_timer_h = 60,
+ .maint_b_cur_lvl = 600,
+ .maint_b_vol_lvl = 4100,
+ .maint_b_chg_timer_h = 200,
+ .low_high_cur_lvl = 300,
+ .low_high_vol_lvl = 4000,
+ .n_temp_tbl_elements = ARRAY_SIZE(temp_tbl_B_thermistor),
+ .r_to_t_tbl = temp_tbl_B_thermistor,
+ .n_v_cap_tbl_elements = ARRAY_SIZE(cap_tbl_B_thermistor),
+ .v_to_cap_tbl = cap_tbl_B_thermistor,
+ .n_batres_tbl_elements = ARRAY_SIZE(temp_to_batres_tbl_thermistor),
+ .batres_tbl = temp_to_batres_tbl_thermistor,
+},
+};
+
+struct abx500_battery_type bat_type_ext_thermistor[] = {
+[BATTERY_UNKNOWN] = {
+ /* First element always represent the UNKNOWN battery */
+ .name = POWER_SUPPLY_TECHNOLOGY_UNKNOWN,
+ .resis_high = 0,
+ .resis_low = 0,
+ .battery_resistance = 300,
+ .charge_full_design = 612,
+ .nominal_voltage = 3700,
+ .termination_vol = 4050,
+ .termination_curr = 200,
+ .recharge_vol = 3990,
+ .normal_cur_lvl = 400,
+ .normal_vol_lvl = 4100,
+ .maint_a_cur_lvl = 400,
+ .maint_a_vol_lvl = 4050,
+ .maint_a_chg_timer_h = 60,
+ .maint_b_cur_lvl = 400,
+ .maint_b_vol_lvl = 4000,
+ .maint_b_chg_timer_h = 200,
+ .low_high_cur_lvl = 300,
+ .low_high_vol_lvl = 4000,
+ .n_temp_tbl_elements = ARRAY_SIZE(temp_tbl),
+ .r_to_t_tbl = temp_tbl,
+ .n_v_cap_tbl_elements = ARRAY_SIZE(cap_tbl),
+ .v_to_cap_tbl = cap_tbl,
+ .n_batres_tbl_elements = ARRAY_SIZE(temp_to_batres_tbl_thermistor),
+ .batres_tbl = temp_to_batres_tbl_thermistor,
+},
+/*
+ * These are the batteries that doesn't have an internal NTC resistor to measure
+ * its temperature. The temperature in this case is measure with a NTC placed
+ * near the battery but on the PCB.
+ */
+{
+ .name = POWER_SUPPLY_TECHNOLOGY_LIPO,
+ .resis_high = 76000,
+ .resis_low = 53000,
+ .battery_resistance = 300,
+ .charge_full_design = 900,
+ .nominal_voltage = 3700,
+ .termination_vol = 4150,
+ .termination_curr = 100,
+ .recharge_vol = 4130,
+ .normal_cur_lvl = 700,
+ .normal_vol_lvl = 4200,
+ .maint_a_cur_lvl = 600,
+ .maint_a_vol_lvl = 4150,
+ .maint_a_chg_timer_h = 60,
+ .maint_b_cur_lvl = 600,
+ .maint_b_vol_lvl = 4100,
+ .maint_b_chg_timer_h = 200,
+ .low_high_cur_lvl = 300,
+ .low_high_vol_lvl = 4000,
+ .n_temp_tbl_elements = ARRAY_SIZE(temp_tbl),
+ .r_to_t_tbl = temp_tbl,
+ .n_v_cap_tbl_elements = ARRAY_SIZE(cap_tbl),
+ .v_to_cap_tbl = cap_tbl,
+ .n_batres_tbl_elements = ARRAY_SIZE(temp_to_batres_tbl_thermistor),
+ .batres_tbl = temp_to_batres_tbl_thermistor,
+},
+{
+ .name = POWER_SUPPLY_TECHNOLOGY_LION,
+ .resis_high = 30000,
+ .resis_low = 10000,
+ .battery_resistance = 300,
+ .charge_full_design = 950,
+ .nominal_voltage = 3700,
+ .termination_vol = 4150,
+ .termination_curr = 100,
+ .recharge_vol = 4130,
+ .normal_cur_lvl = 700,
+ .normal_vol_lvl = 4200,
+ .maint_a_cur_lvl = 600,
+ .maint_a_vol_lvl = 4150,
+ .maint_a_chg_timer_h = 60,
+ .maint_b_cur_lvl = 600,
+ .maint_b_vol_lvl = 4100,
+ .maint_b_chg_timer_h = 200,
+ .low_high_cur_lvl = 300,
+ .low_high_vol_lvl = 4000,
+ .n_temp_tbl_elements = ARRAY_SIZE(temp_tbl),
+ .r_to_t_tbl = temp_tbl,
+ .n_v_cap_tbl_elements = ARRAY_SIZE(cap_tbl),
+ .v_to_cap_tbl = cap_tbl,
+ .n_batres_tbl_elements = ARRAY_SIZE(temp_to_batres_tbl_thermistor),
+ .batres_tbl = temp_to_batres_tbl_thermistor,
+},
+{
+ .name = POWER_SUPPLY_TECHNOLOGY_LION,
+ .resis_high = 95000,
+ .resis_low = 76001,
+ .battery_resistance = 300,
+ .charge_full_design = 950,
+ .nominal_voltage = 3700,
+ .termination_vol = 4150,
+ .termination_curr = 100,
+ .recharge_vol = 4130,
+ .normal_cur_lvl = 700,
+ .normal_vol_lvl = 4200,
+ .maint_a_cur_lvl = 600,
+ .maint_a_vol_lvl = 4150,
+ .maint_a_chg_timer_h = 60,
+ .maint_b_cur_lvl = 600,
+ .maint_b_vol_lvl = 4100,
+ .maint_b_chg_timer_h = 200,
+ .low_high_cur_lvl = 300,
+ .low_high_vol_lvl = 4000,
+ .n_temp_tbl_elements = ARRAY_SIZE(temp_tbl),
+ .r_to_t_tbl = temp_tbl,
+ .n_v_cap_tbl_elements = ARRAY_SIZE(cap_tbl),
+ .v_to_cap_tbl = cap_tbl,
+ .n_batres_tbl_elements = ARRAY_SIZE(temp_to_batres_tbl_thermistor),
+ .batres_tbl = temp_to_batres_tbl_thermistor,
+},
+};
+
+static const struct abx500_bm_capacity_levels cap_levels = {
+ .critical = 2,
+ .low = 10,
+ .normal = 70,
+ .high = 95,
+ .full = 100,
+};
+
+static const struct abx500_fg_parameters fg = {
+ .recovery_sleep_timer = 10,
+ .recovery_total_time = 100,
+ .init_timer = 1,
+ .init_discard_time = 5,
+ .init_total_time = 40,
+ .high_curr_time = 60,
+ .accu_charging = 30,
+ .accu_high_curr = 30,
+ .high_curr_threshold = 50,
+ .lowbat_threshold = 3100,
+ .battok_falling_th_sel0 = 2860,
+ .battok_raising_th_sel1 = 2860,
+ .user_cap_limit = 15,
+ .maint_thres = 97,
+};
+
+static const struct abx500_maxim_parameters maxi_params = {
+ .ena_maxi = true,
+ .chg_curr = 910,
+ .wait_cycles = 10,
+ .charger_curr_step = 100,
+};
+
+static const struct abx500_bm_charger_parameters chg = {
+ .usb_volt_max = 5500,
+ .usb_curr_max = 1500,
+ .ac_volt_max = 7500,
+ .ac_curr_max = 1500,
+};
+
+struct abx500_bm_data ab8500_bm_data = {
+ .temp_under = 3,
+ .temp_low = 8,
+ .temp_high = 43,
+ .temp_over = 48,
+ .main_safety_tmr_h = 4,
+ .temp_interval_chg = 20,
+ .temp_interval_nochg = 120,
+ .usb_safety_tmr_h = 4,
+ .bkup_bat_v = BUP_VCH_SEL_2P6V,
+ .bkup_bat_i = BUP_ICH_SEL_150UA,
+ .no_maintenance = false,
+ .adc_therm = ABx500_ADC_THERM_BATCTRL,
+ .chg_unknown_bat = false,
+ .enable_overshoot = false,
+ .fg_res = 100,
+ .cap_levels = &cap_levels,
+ .bat_type = bat_type_thermistor,
+ .n_btypes = 3,
+ .batt_id = 0,
+ .interval_charging = 5,
+ .interval_not_charging = 120,
+ .temp_hysteresis = 3,
+ .gnd_lift_resistance = 34,
+ .maxi = &maxi_params,
+ .chg_params = &chg,
+ .fg_params = &fg,
+};
+
+int __devinit
+bmdevs_of_probe(struct device *dev,
+ struct device_node *np,
+ struct abx500_bm_data **battery)
+{
+ struct abx500_battery_type *btype;
+ struct device_node *np_bat_supply;
+ struct abx500_bm_data *bat;
+ const char *btech;
+ int i, thermistor;
+
+ *battery = &ab8500_bm_data;
+
+ /* get phandle to 'battery-info' node */
+ np_bat_supply = of_parse_phandle(np, "battery", 0);
+ if (!np_bat_supply) {
+ dev_err(dev, "missing property battery\n");
+ return -EINVAL;
+ }
+ if (of_property_read_bool(np_bat_supply,
+ "thermistor-on-batctrl"))
+ thermistor = NTC_INTERNAL;
+ else
+ thermistor = NTC_EXTERNAL;
+
+ bat = *battery;
+ if (thermistor == NTC_EXTERNAL) {
+ bat->n_btypes = 4;
+ bat->bat_type = bat_type_ext_thermistor;
+ bat->adc_therm = ABx500_ADC_THERM_BATTEMP;
+ }
+ btech = of_get_property(np_bat_supply,
+ "stericsson,battery-type", NULL);
+ if (!btech) {
+ dev_warn(dev, "missing property battery-name/type\n");
+ return -EINVAL;
+ }
+ if (strncmp(btech, "LION", 4) == 0) {
+ bat->no_maintenance = true;
+ bat->chg_unknown_bat = true;
+ bat->bat_type[BATTERY_UNKNOWN].charge_full_design = 2600;
+ bat->bat_type[BATTERY_UNKNOWN].termination_vol = 4150;
+ bat->bat_type[BATTERY_UNKNOWN].recharge_vol = 4130;
+ bat->bat_type[BATTERY_UNKNOWN].normal_cur_lvl = 520;
+ bat->bat_type[BATTERY_UNKNOWN].normal_vol_lvl = 4200;
+ }
+ /* select the battery resolution table */
+ for (i = 0; i < bat->n_btypes; ++i) {
+ btype = (bat->bat_type + i);
+ if (thermistor == NTC_EXTERNAL) {
+ btype->batres_tbl =
+ temp_to_batres_tbl_ext_thermistor;
+ } else if (strncmp(btech, "LION", 4) == 0) {
+ btype->batres_tbl =
+ temp_to_batres_tbl_9100;
+ } else {
+ btype->batres_tbl =
+ temp_to_batres_tbl_thermistor;
+ }
+ }
+ of_node_put(np_bat_supply);
+ return 0;
+}
diff --git a/drivers/power/ab8500_btemp.c b/drivers/power/ab8500_btemp.c
index e3b6395..abc2abc 100644
--- a/drivers/power/ab8500_btemp.c
+++ b/drivers/power/ab8500_btemp.c
@@ -93,7 +93,7 @@ struct ab8500_btemp {
struct ab8500 *parent;
struct ab8500_gpadc *gpadc;
struct ab8500_fg *fg;
- struct abx500_btemp_platform_data *pdata;
+ struct abx500_bmdevs_plat_data *pdata;
struct abx500_bm_data *bat;
struct power_supply btemp_psy;
struct ab8500_btemp_events events;
@@ -962,10 +962,10 @@ static int __devexit ab8500_btemp_remove(struct platform_device *pdev)
static int __devinit ab8500_btemp_probe(struct platform_device *pdev)
{
+ struct abx500_bmdevs_plat_data *plat_data = pdev->dev.platform_data;
+ struct ab8500_btemp *di;
int irq, i, ret = 0;
u8 val;
- struct abx500_bm_plat_data *plat_data = pdev->dev.platform_data;
- struct ab8500_btemp *di;
if (!plat_data) {
dev_err(&pdev->dev, "No platform data\n");
@@ -982,21 +982,13 @@ static int __devinit ab8500_btemp_probe(struct platform_device *pdev)
di->gpadc = ab8500_gpadc_get("ab8500-gpadc.0");
/* get btemp specific platform data */
- di->pdata = plat_data->btemp;
+ di->pdata = plat_data;
if (!di->pdata) {
dev_err(di->dev, "no btemp platform data supplied\n");
ret = -EINVAL;
goto free_device_info;
}
- /* get battery specific platform data */
- di->bat = plat_data->battery;
- if (!di->bat) {
- dev_err(di->dev, "no battery platform data supplied\n");
- ret = -EINVAL;
- goto free_device_info;
- }
-
/* BTEMP supply */
di->btemp_psy.name = "ab8500_btemp";
di->btemp_psy.type = POWER_SUPPLY_TYPE_BATTERY;
diff --git a/drivers/power/ab8500_charger.c b/drivers/power/ab8500_charger.c
index 26ff759..723edb4 100644
--- a/drivers/power/ab8500_charger.c
+++ b/drivers/power/ab8500_charger.c
@@ -220,7 +220,7 @@ struct ab8500_charger {
bool autopower;
struct ab8500 *parent;
struct ab8500_gpadc *gpadc;
- struct abx500_charger_platform_data *pdata;
+ struct abx500_bmdevs_plat_data *pdata;
struct abx500_bm_data *bat;
struct ab8500_charger_event_flags flags;
struct ab8500_charger_usb_state usb_state;
@@ -2533,9 +2533,9 @@ static int __devexit ab8500_charger_remove(struct platform_device *pdev)
static int __devinit ab8500_charger_probe(struct platform_device *pdev)
{
- int irq, i, charger_status, ret = 0;
- struct abx500_bm_plat_data *plat_data = pdev->dev.platform_data;
+ struct abx500_bmdevs_plat_data *plat_data = pdev->dev.platform_data;
struct ab8500_charger *di;
+ int irq, i, charger_status, ret = 0;
if (!plat_data) {
dev_err(&pdev->dev, "No platform data\n");
@@ -2555,21 +2555,13 @@ static int __devinit ab8500_charger_probe(struct platform_device *pdev)
spin_lock_init(&di->usb_state.usb_lock);
/* get charger specific platform data */
- di->pdata = plat_data->charger;
+ di->pdata = plat_data;
if (!di->pdata) {
dev_err(di->dev, "no charger platform data supplied\n");
ret = -EINVAL;
goto free_device_info;
}
- /* get battery specific platform data */
- di->bat = plat_data->battery;
- if (!di->bat) {
- dev_err(di->dev, "no battery platform data supplied\n");
- ret = -EINVAL;
- goto free_device_info;
- }
-
di->autopower = false;
/* AC supply */
diff --git a/drivers/power/ab8500_fg.c b/drivers/power/ab8500_fg.c
index 2db8cc2..20ac3b8 100644
--- a/drivers/power/ab8500_fg.c
+++ b/drivers/power/ab8500_fg.c
@@ -22,15 +22,16 @@
#include <linux/platform_device.h>
#include <linux/power_supply.h>
#include <linux/kobject.h>
-#include <linux/mfd/abx500/ab8500.h>
-#include <linux/mfd/abx500.h>
#include <linux/slab.h>
-#include <linux/mfd/abx500/ab8500-bm.h>
#include <linux/delay.h>
-#include <linux/mfd/abx500/ab8500-gpadc.h>
-#include <linux/mfd/abx500.h>
#include <linux/time.h>
+#include <linux/of.h>
#include <linux/completion.h>
+#include <linux/mfd/core.h>
+#include <linux/mfd/abx500.h>
+#include <linux/mfd/abx500/ab8500.h>
+#include <linux/mfd/abx500/ab8500-bm.h>
+#include <linux/mfd/abx500/ab8500-gpadc.h>
#define MILLI_TO_MICRO 1000
#define FG_LSB_IN_MA 1627
@@ -172,7 +173,6 @@ struct inst_curr_result_list {
* @avg_cap: Average capacity filter
* @parent: Pointer to the struct ab8500
* @gpadc: Pointer to the struct gpadc
- * @pdata: Pointer to the abx500_fg platform data
* @bat: Pointer to the abx500_bm platform data
* @fg_psy: Structure that holds the FG specific battery properties
* @fg_wq: Work queue for running the FG algorithm
@@ -212,7 +212,6 @@ struct ab8500_fg {
struct ab8500_fg_avg_cap avg_cap;
struct ab8500 *parent;
struct ab8500_gpadc *gpadc;
- struct abx500_fg_platform_data *pdata;
struct abx500_bm_data *bat;
struct power_supply fg_psy;
struct workqueue_struct *fg_wq;
@@ -2429,7 +2428,6 @@ static int __devexit ab8500_fg_remove(struct platform_device *pdev)
flush_scheduled_work();
power_supply_unregister(&di->fg_psy);
platform_set_drvdata(pdev, NULL);
- kfree(di);
return ret;
}
@@ -2442,21 +2440,39 @@ static struct ab8500_fg_interrupts ab8500_fg_irq[] = {
{"CCEOC", ab8500_fg_cc_data_end_handler},
};
+static char *supply_interface[] = {
+ "ab8500_chargalg",
+ "ab8500_usb",
+};
+
static int __devinit ab8500_fg_probe(struct platform_device *pdev)
{
+ struct device_node *np = pdev->dev.of_node;
+ struct ab8500_fg *di;
int i, irq;
int ret = 0;
- struct abx500_bm_plat_data *plat_data = pdev->dev.platform_data;
- struct ab8500_fg *di;
-
- if (!plat_data) {
- dev_err(&pdev->dev, "No platform data\n");
- return -EINVAL;
- }
- di = kzalloc(sizeof(*di), GFP_KERNEL);
- if (!di)
+ di = devm_kzalloc(&pdev->dev, sizeof(*di), GFP_KERNEL);
+ if (!di) {
+ dev_err(&pdev->dev, "%s no mem for ab8500_fg\n", __func__);
return -ENOMEM;
+ }
+ di->bat = pdev->mfd_cell->platform_data;
+ if (!di->bat) {
+ if (np) {
+ ret = bmdevs_of_probe(&pdev->dev, np, &di->bat);
+ if (ret) {
+ dev_err(&pdev->dev,
+ "failed to get battery information\n");
+ return ret;
+ }
+ } else {
+ dev_err(&pdev->dev, "missing dt node for ab8500_fg\n");
+ return -EINVAL;
+ }
+ } else {
+ dev_info(&pdev->dev, "falling back to legacy platform data\n");
+ }
mutex_init(&di->cc_lock);
@@ -2465,29 +2481,13 @@ static int __devinit ab8500_fg_probe(struct platform_device *pdev)
di->parent = dev_get_drvdata(pdev->dev.parent);
di->gpadc = ab8500_gpadc_get("ab8500-gpadc.0");
- /* get fg specific platform data */
- di->pdata = plat_data->fg;
- if (!di->pdata) {
- dev_err(di->dev, "no fg platform data supplied\n");
- ret = -EINVAL;
- goto free_device_info;
- }
-
- /* get battery specific platform data */
- di->bat = plat_data->battery;
- if (!di->bat) {
- dev_err(di->dev, "no battery platform data supplied\n");
- ret = -EINVAL;
- goto free_device_info;
- }
-
di->fg_psy.name = "ab8500_fg";
di->fg_psy.type = POWER_SUPPLY_TYPE_BATTERY;
di->fg_psy.properties = ab8500_fg_props;
di->fg_psy.num_properties = ARRAY_SIZE(ab8500_fg_props);
di->fg_psy.get_property = ab8500_fg_get_property;
- di->fg_psy.supplied_to = di->pdata->supplied_to;
- di->fg_psy.num_supplicants = di->pdata->num_supplicants;
+ di->fg_psy.supplied_to = supply_interface;
+ di->fg_psy.num_supplicants = ARRAY_SIZE(supply_interface),
di->fg_psy.external_power_changed = ab8500_fg_external_power_changed;
di->bat_cap.max_mah_design = MILLI_TO_MICRO *
@@ -2506,8 +2506,7 @@ static int __devinit ab8500_fg_probe(struct platform_device *pdev)
di->fg_wq = create_singlethread_workqueue("ab8500_fg_wq");
if (di->fg_wq == NULL) {
dev_err(di->dev, "failed to create work queue\n");
- ret = -ENOMEM;
- goto free_device_info;
+ return -ENOMEM;
}
/* Init work for running the fg algorithm instantly */
@@ -2606,12 +2605,15 @@ free_irq:
}
free_inst_curr_wq:
destroy_workqueue(di->fg_wq);
-free_device_info:
- kfree(di);
return ret;
}
+static const struct of_device_id ab8500_fg_match[] = {
+ { .compatible = "stericsson,ab8500-fg", },
+ { },
+};
+
static struct platform_driver ab8500_fg_driver = {
.probe = ab8500_fg_probe,
.remove = __devexit_p(ab8500_fg_remove),
@@ -2620,6 +2622,7 @@ static struct platform_driver ab8500_fg_driver = {
.driver = {
.name = "ab8500-fg",
.owner = THIS_MODULE,
+ .of_match_table = ab8500_fg_match,
},
};
diff --git a/drivers/power/abx500_chargalg.c b/drivers/power/abx500_chargalg.c
index 4d30280..94bf69b 100644
--- a/drivers/power/abx500_chargalg.c
+++ b/drivers/power/abx500_chargalg.c
@@ -231,7 +231,7 @@ struct abx500_chargalg {
struct abx500_chargalg_charger_info chg_info;
struct abx500_chargalg_battery_data batt_data;
struct abx500_chargalg_suspension_status susp_status;
- struct abx500_chargalg_platform_data *pdata;
+ struct abx500_bmdevs_plat_data *pdata;
struct abx500_bm_data *bat;
struct power_supply chargalg_psy;
struct ux500_charger *ac_chg;
@@ -1802,7 +1802,7 @@ static int __devexit abx500_chargalg_remove(struct platform_device *pdev)
static int __devinit abx500_chargalg_probe(struct platform_device *pdev)
{
- struct abx500_bm_plat_data *plat_data;
+ struct abx500_bmdevs_plat_data *plat_data;
int ret = 0;
struct abx500_chargalg *di =
@@ -1814,8 +1814,7 @@ static int __devinit abx500_chargalg_probe(struct platform_device *pdev)
di->dev = &pdev->dev;
plat_data = pdev->dev.platform_data;
- di->pdata = plat_data->chargalg;
- di->bat = plat_data->battery;
+ di->pdata = plat_data;
/* chargalg supply */
di->chargalg_psy.name = "abx500_chargalg";
diff --git a/include/linux/mfd/abx500.h b/include/linux/mfd/abx500.h
index 5d5298d..33f2c58 100644
--- a/include/linux/mfd/abx500.h
+++ b/include/linux/mfd/abx500.h
@@ -267,39 +267,27 @@ struct abx500_bm_data {
int gnd_lift_resistance;
const struct abx500_maxim_parameters *maxi;
const struct abx500_bm_capacity_levels *cap_levels;
- const struct abx500_battery_type *bat_type;
+ struct abx500_battery_type *bat_type;
const struct abx500_bm_charger_parameters *chg_params;
const struct abx500_fg_parameters *fg_params;
};
-struct abx500_chargalg_platform_data {
- char **supplied_to;
- size_t num_supplicants;
-};
-
-struct abx500_charger_platform_data {
- char **supplied_to;
- size_t num_supplicants;
- bool autopower_cfg;
-};
+extern struct abx500_bm_data ab8500_bm_data;
-struct abx500_btemp_platform_data {
- char **supplied_to;
- size_t num_supplicants;
+struct abx500_bmdevs_plat_data {
+ char **supplied_to;
+ size_t num_supplicants;
+ bool autopower_cfg;
};
-struct abx500_fg_platform_data {
- char **supplied_to;
- size_t num_supplicants;
+enum {
+ NTC_EXTERNAL = 0,
+ NTC_INTERNAL,
};
-struct abx500_bm_plat_data {
- struct abx500_bm_data *battery;
- struct abx500_charger_platform_data *charger;
- struct abx500_btemp_platform_data *btemp;
- struct abx500_fg_platform_data *fg;
- struct abx500_chargalg_platform_data *chargalg;
-};
+int bmdevs_of_probe(struct device *dev,
+ struct device_node *np,
+ struct abx500_bm_data **battery);
int abx500_set_register_interruptible(struct device *dev, u8 bank, u8 reg,
u8 value);
--
1.7.10.4
From: "Rajanikanth H.V" <[email protected]>
This patch adds device tree support for ab8500-charger
driver
Signed-off-by: Rajanikanth H.V <[email protected]>
---
Documentation/devicetree/bindings/mfd/ab8500.txt | 14 ++++
.../bindings/power_supply/ab8500/charger.txt | 25 +++++++
arch/arm/boot/dts/dbx5x0.dtsi | 6 ++
drivers/mfd/ab8500-core.c | 5 ++
drivers/power/ab8500_charger.c | 73 ++++++++++++--------
5 files changed, 96 insertions(+), 27 deletions(-)
create mode 100644 Documentation/devicetree/bindings/power_supply/ab8500/charger.txt
diff --git a/Documentation/devicetree/bindings/mfd/ab8500.txt b/Documentation/devicetree/bindings/mfd/ab8500.txt
index f2ee0e7..13b707b 100644
--- a/Documentation/devicetree/bindings/mfd/ab8500.txt
+++ b/Documentation/devicetree/bindings/mfd/ab8500.txt
@@ -36,6 +36,20 @@ ab8500-btemp : : vtvout : Battery Temperature
: BTEMP_LOW_MEDIUM : : BtempLow < Btemp < BtempMedium,if battery temperature is between -10 and 0°C
: BTEMP_MEDIUM_HIGH : : BtempMedium < Btemp < BtempHigh,if battery temperature is between 0°C and“MaxTemp
: BTEMP_HIGH : : Btemp > BtempHigh, if battery temperature is higher than “MaxTemp
+ab8500-charger : : vddadc : Charger interface
+ : MAIN_CH_UNPLUG_DET : : main charger unplug detection management (not in 8505)
+ : MAIN_CHARGE_PLUG_DET : : main charger plug detection management (not in 8505)
+ : MAIN_EXT_CH_NOT_OK : : main charger not OK
+ : MAIN_CH_TH_PROT_R : : Die temp is above main charger
+ : MAIN_CH_TH_PROT_F : : Die temp is below main charger
+ : VBUS_DET_F : : VBUS falling detected
+ : VBUS_DET_R : : VBUS rising detected
+ : USB_LINK_STATUS : : USB link status has changed
+ : USB_CH_TH_PROT_R : : Die temp is above usb charger
+ : USB_CH_TH_PROT_F : : Die temp is below usb charger
+ : USB_CHARGER_NOT_OKR : : allowed USB charger not ok detection
+ : VBUS_OVV : : Overvoltage on Vbus ball detected (USB charge is stopped)
+ : CH_WD_EXP : : Charger watchdog detected
ab8500-gpadc : HW_CONV_END : vddadc : Analogue to Digital Converter
SW_CONV_END : :
ab8500-gpio : : : GPIO Controller
diff --git a/Documentation/devicetree/bindings/power_supply/ab8500/charger.txt b/Documentation/devicetree/bindings/power_supply/ab8500/charger.txt
new file mode 100644
index 0000000..6bdbb08
--- /dev/null
+++ b/Documentation/devicetree/bindings/power_supply/ab8500/charger.txt
@@ -0,0 +1,25 @@
+=== AB8500 Charger Driver ===
+
+Required Properties:
+- compatible = Shall be "stericsson,ab8500-charger"
+- battery = Shall be battery specific information
+ Example:
+ ab8500_charger {
+ compatible = "stericsson,ab8500-charger";
+ battery = <&ab8500_battery>;
+ };
+
+- vddadc-supply: Supply for USB and Main charger
+ Example:
+ ab8500-charger {
+ vddadc-supply = <&ab8500_ldo_tvout_reg>;
+ }
+- autopower_cfg:
+ Boolean value depicting the presence of 'automatic poweron after powerloss'
+ Example:
+ ab8500-charger {
+ autopower_cfg;
+ };
+
+For information on battery specific node, Ref:
+Documentation/devicetree/bindings/power_supply/ab8500/fg.txt
diff --git a/arch/arm/boot/dts/dbx5x0.dtsi b/arch/arm/boot/dts/dbx5x0.dtsi
index 3f1d899..7e9c01a 100644
--- a/arch/arm/boot/dts/dbx5x0.dtsi
+++ b/arch/arm/boot/dts/dbx5x0.dtsi
@@ -357,6 +357,12 @@
thermistor-on-batctrl;
};
+ ab8500-charger {
+ compatible = "stericsson,ab8500-charger";
+ battery = <&ab8500_battery>;
+ vddadc-supply = <&ab8500_ldo_tvout_reg>;
+ };
+
ab8500-btemp {
compatible = "stericsson,ab8500-btemp";
battery = <&ab8500_battery>;
diff --git a/drivers/mfd/ab8500-core.c b/drivers/mfd/ab8500-core.c
index 94d45be..c7a120b 100644
--- a/drivers/mfd/ab8500-core.c
+++ b/drivers/mfd/ab8500-core.c
@@ -1041,8 +1041,13 @@ static struct mfd_cell __devinitdata abx500_common_devs[] = {
static struct mfd_cell __devinitdata ab8500_bm_devs[] = {
{
.name = "ab8500-charger",
+ .of_compatible = "stericsson,ab8500-charger",
.num_resources = ARRAY_SIZE(ab8500_charger_resources),
.resources = ab8500_charger_resources,
+#ifndef CONFIG_OF
+ .platform_data = &ab8500_bm_data,
+ .pdata_size = sizeof(ab8500_bm_data),
+#endif
},
{
.name = "ab8500-btemp",
diff --git a/drivers/power/ab8500_charger.c b/drivers/power/ab8500_charger.c
index 723edb4..5156a98 100644
--- a/drivers/power/ab8500_charger.c
+++ b/drivers/power/ab8500_charger.c
@@ -23,6 +23,8 @@
#include <linux/err.h>
#include <linux/workqueue.h>
#include <linux/kobject.h>
+#include <linux/of.h>
+#include <linux/mfd/core.h>
#include <linux/mfd/abx500/ab8500.h>
#include <linux/mfd/abx500.h>
#include <linux/mfd/abx500/ab8500-bm.h>
@@ -181,9 +183,9 @@ struct ab8500_charger_usb_state {
* @vbat Battery voltage
* @old_vbat Previously measured battery voltage
* @autopower Indicate if we should have automatic pwron after pwrloss
+ * @autopower_cfg platform specific power config support for "pwron after pwrloss"
* @parent: Pointer to the struct ab8500
* @gpadc: Pointer to the struct gpadc
- * @pdata: Pointer to the abx500_charger platform data
* @bat: Pointer to the abx500_bm platform data
* @flags: Structure for information about events triggered
* @usb_state: Structure for usb stack information
@@ -218,9 +220,9 @@ struct ab8500_charger {
int vbat;
int old_vbat;
bool autopower;
+ bool autopower_cfg;
struct ab8500 *parent;
struct ab8500_gpadc *gpadc;
- struct abx500_bmdevs_plat_data *pdata;
struct abx500_bm_data *bat;
struct ab8500_charger_event_flags flags;
struct ab8500_charger_usb_state usb_state;
@@ -322,7 +324,7 @@ static void ab8500_power_loss_handling(struct ab8500_charger *di)
static void ab8500_power_supply_changed(struct ab8500_charger *di,
struct power_supply *psy)
{
- if (di->pdata->autopower_cfg) {
+ if (di->autopower_cfg) {
if (!di->usb.charger_connected &&
!di->ac.charger_connected &&
di->autopower) {
@@ -2526,25 +2528,47 @@ static int __devexit ab8500_charger_remove(struct platform_device *pdev)
power_supply_unregister(&di->usb_chg.psy);
power_supply_unregister(&di->ac_chg.psy);
platform_set_drvdata(pdev, NULL);
- kfree(di);
return 0;
}
+static char *supply_interface[] = {
+ "ab8500_chargalg",
+ "ab8500_fg",
+ "ab8500_btemp",
+};
+
static int __devinit ab8500_charger_probe(struct platform_device *pdev)
{
- struct abx500_bmdevs_plat_data *plat_data = pdev->dev.platform_data;
+ struct device_node *np = pdev->dev.of_node;
struct ab8500_charger *di;
int irq, i, charger_status, ret = 0;
- if (!plat_data) {
- dev_err(&pdev->dev, "No platform data\n");
- return -EINVAL;
+ di = devm_kzalloc(&pdev->dev, sizeof(*di), GFP_KERNEL);
+ if (!di) {
+ dev_err(&pdev->dev, "%s no mem for ab8500_charger\n", __func__);
+ return -ENOMEM;
}
- di = kzalloc(sizeof(*di), GFP_KERNEL);
- if (!di)
- return -ENOMEM;
+ di->bat = pdev->mfd_cell->platform_data;
+ if (!di->bat) {
+ if (np) {
+ ret = bmdevs_of_probe(&pdev->dev, np, &di->bat);
+ if (ret) {
+ dev_err(&pdev->dev,
+ "failed to get battery information\n");
+ return ret;
+ }
+ di->autopower_cfg =
+ of_property_read_bool(np, "autopower_cfg");
+ } else {
+ dev_err(&pdev->dev, "missing dt node for ab8500_charger\n");
+ return -EINVAL;
+ }
+ } else {
+ dev_info(&pdev->dev, "falling back to legacy platform data\n");
+ di->autopower_cfg = false;
+ }
/* get parent data */
di->dev = &pdev->dev;
@@ -2554,14 +2578,6 @@ static int __devinit ab8500_charger_probe(struct platform_device *pdev)
/* initialize lock */
spin_lock_init(&di->usb_state.usb_lock);
- /* get charger specific platform data */
- di->pdata = plat_data;
- if (!di->pdata) {
- dev_err(di->dev, "no charger platform data supplied\n");
- ret = -EINVAL;
- goto free_device_info;
- }
-
di->autopower = false;
/* AC supply */
@@ -2571,8 +2587,8 @@ static int __devinit ab8500_charger_probe(struct platform_device *pdev)
di->ac_chg.psy.properties = ab8500_charger_ac_props;
di->ac_chg.psy.num_properties = ARRAY_SIZE(ab8500_charger_ac_props);
di->ac_chg.psy.get_property = ab8500_charger_ac_get_property;
- di->ac_chg.psy.supplied_to = di->pdata->supplied_to;
- di->ac_chg.psy.num_supplicants = di->pdata->num_supplicants;
+ di->ac_chg.psy.supplied_to = supply_interface;
+ di->ac_chg.psy.num_supplicants = ARRAY_SIZE(supply_interface),
/* ux500_charger sub-class */
di->ac_chg.ops.enable = &ab8500_charger_ac_en;
di->ac_chg.ops.kick_wd = &ab8500_charger_watchdog_kick;
@@ -2589,8 +2605,8 @@ static int __devinit ab8500_charger_probe(struct platform_device *pdev)
di->usb_chg.psy.properties = ab8500_charger_usb_props;
di->usb_chg.psy.num_properties = ARRAY_SIZE(ab8500_charger_usb_props);
di->usb_chg.psy.get_property = ab8500_charger_usb_get_property;
- di->usb_chg.psy.supplied_to = di->pdata->supplied_to;
- di->usb_chg.psy.num_supplicants = di->pdata->num_supplicants;
+ di->usb_chg.psy.supplied_to = supply_interface;
+ di->usb_chg.psy.num_supplicants = ARRAY_SIZE(supply_interface),
/* ux500_charger sub-class */
di->usb_chg.ops.enable = &ab8500_charger_usb_en;
di->usb_chg.ops.kick_wd = &ab8500_charger_watchdog_kick;
@@ -2606,8 +2622,7 @@ static int __devinit ab8500_charger_probe(struct platform_device *pdev)
create_singlethread_workqueue("ab8500_charger_wq");
if (di->charger_wq == NULL) {
dev_err(di->dev, "failed to create work queue\n");
- ret = -ENOMEM;
- goto free_device_info;
+ return -ENOMEM;
}
/* Init work for HW failure check */
@@ -2749,12 +2764,15 @@ free_regulator:
regulator_put(di->regu);
free_charger_wq:
destroy_workqueue(di->charger_wq);
-free_device_info:
- kfree(di);
return ret;
}
+static const struct of_device_id ab8500_charger_match[] = {
+ { .compatible = "stericsson,ab8500-charger", },
+ { },
+};
+
static struct platform_driver ab8500_charger_driver = {
.probe = ab8500_charger_probe,
.remove = __devexit_p(ab8500_charger_remove),
@@ -2763,6 +2781,7 @@ static struct platform_driver ab8500_charger_driver = {
.driver = {
.name = "ab8500-charger",
.owner = THIS_MODULE,
+ .of_match_table = ab8500_charger_match,
},
};
--
1.7.10.4
From: "Rajanikanth H.V" <[email protected]>
This patch adds device tree support for charging algorithm
driver
Signed-off-by: Rajanikanth H.V <[email protected]>
---
.../bindings/power_supply/ab8500/chargalg.txt | 16 ++++++
arch/arm/boot/dts/dbx5x0.dtsi | 5 ++
drivers/mfd/ab8500-core.c | 5 ++
drivers/power/abx500_chargalg.c | 56 ++++++++++++++------
include/linux/mfd/abx500.h | 6 ---
5 files changed, 66 insertions(+), 22 deletions(-)
create mode 100644 Documentation/devicetree/bindings/power_supply/ab8500/chargalg.txt
diff --git a/Documentation/devicetree/bindings/power_supply/ab8500/chargalg.txt b/Documentation/devicetree/bindings/power_supply/ab8500/chargalg.txt
new file mode 100644
index 0000000..ef53283
--- /dev/null
+++ b/Documentation/devicetree/bindings/power_supply/ab8500/chargalg.txt
@@ -0,0 +1,16 @@
+=== AB8500 Charging Algorithm Driver ===
+
+The properties below describes the node for chargalg driver.
+
+Required Properties:
+- compatible = Shall be: "stericsson,ab8500-chargalg"
+- battery = Shall be battery specific information
+
+Example:
+ab8500_chargalg {
+ compatible = "stericsson,ab8500-chargalg";
+ battery = <&ab8500_battery>;
+};
+
+For information on battery specific node, Ref:
+Documentation/devicetree/bindings/power_supply/ab8500/fg.txt
diff --git a/arch/arm/boot/dts/dbx5x0.dtsi b/arch/arm/boot/dts/dbx5x0.dtsi
index 7e9c01a..f1661b3 100644
--- a/arch/arm/boot/dts/dbx5x0.dtsi
+++ b/arch/arm/boot/dts/dbx5x0.dtsi
@@ -357,6 +357,11 @@
thermistor-on-batctrl;
};
+ ab8500-chargalg {
+ compatible = "stericsson,ab8500-chargalg";
+ battery = <&ab8500_battery>;
+ };
+
ab8500-charger {
compatible = "stericsson,ab8500-charger";
battery = <&ab8500_battery>;
diff --git a/drivers/mfd/ab8500-core.c b/drivers/mfd/ab8500-core.c
index c7a120b..5ec70f2 100644
--- a/drivers/mfd/ab8500-core.c
+++ b/drivers/mfd/ab8500-core.c
@@ -1071,8 +1071,13 @@ static struct mfd_cell __devinitdata ab8500_bm_devs[] = {
},
{
.name = "ab8500-chargalg",
+ .of_compatible = "stericsson,ab8500-chargalg",
.num_resources = ARRAY_SIZE(ab8500_chargalg_resources),
.resources = ab8500_chargalg_resources,
+#ifndef CONFIG_OF
+ .platform_data = &ab8500_bm_data,
+ .pdata_size = sizeof(ab8500_bm_data),
+#endif
},
};
diff --git a/drivers/power/abx500_chargalg.c b/drivers/power/abx500_chargalg.c
index 94bf69b..96eb2c5 100644
--- a/drivers/power/abx500_chargalg.c
+++ b/drivers/power/abx500_chargalg.c
@@ -21,6 +21,8 @@
#include <linux/completion.h>
#include <linux/workqueue.h>
#include <linux/kobject.h>
+#include <linux/of.h>
+#include <linux/mfd/core.h>
#include <linux/mfd/abx500.h>
#include <linux/mfd/abx500/ux500_chargalg.h>
#include <linux/mfd/abx500/ab8500-bm.h>
@@ -205,7 +207,6 @@ enum maxim_ret {
* @chg_info: information about connected charger types
* @batt_data: data of the battery
* @susp_status: current charger suspension status
- * @pdata: pointer to the abx500_chargalg platform data
* @bat: pointer to the abx500_bm platform data
* @chargalg_psy: structure that holds the battery properties exposed by
* the charging algorithm
@@ -231,7 +232,6 @@ struct abx500_chargalg {
struct abx500_chargalg_charger_info chg_info;
struct abx500_chargalg_battery_data batt_data;
struct abx500_chargalg_suspension_status susp_status;
- struct abx500_bmdevs_plat_data *pdata;
struct abx500_bm_data *bat;
struct power_supply chargalg_psy;
struct ux500_charger *ac_chg;
@@ -1795,35 +1795,55 @@ static int __devexit abx500_chargalg_remove(struct platform_device *pdev)
flush_scheduled_work();
power_supply_unregister(&di->chargalg_psy);
platform_set_drvdata(pdev, NULL);
- kfree(di);
return 0;
}
+static char *supply_interface[] = {
+ "ab8500_fg",
+};
+
static int __devinit abx500_chargalg_probe(struct platform_device *pdev)
{
- struct abx500_bmdevs_plat_data *plat_data;
+ struct device_node *np = pdev->dev.of_node;
+ struct abx500_chargalg *di;
int ret = 0;
- struct abx500_chargalg *di =
- kzalloc(sizeof(struct abx500_chargalg), GFP_KERNEL);
- if (!di)
+ di = devm_kzalloc(&pdev->dev, sizeof(*di), GFP_KERNEL);
+ if (!di) {
+ dev_err(&pdev->dev, "%s no mem for ab8500_chargalg\n",
+ __func__);
return -ENOMEM;
+ }
+
+ di->bat = pdev->mfd_cell->platform_data;
+ if (!di->bat) {
+ if (np) {
+ ret = bmdevs_of_probe(&pdev->dev, np, &di->bat);
+ if (ret) {
+ dev_err(&pdev->dev,
+ "failed to get battery information\n");
+ return ret;
+ }
+ } else {
+ dev_err(&pdev->dev, "missing dt node for ab8500_chargalg\n");
+ return -EINVAL;
+ }
+ } else {
+ dev_info(&pdev->dev, "falling back to legacy platform data\n");
+ }
/* get device struct */
di->dev = &pdev->dev;
- plat_data = pdev->dev.platform_data;
- di->pdata = plat_data;
-
/* chargalg supply */
di->chargalg_psy.name = "abx500_chargalg";
di->chargalg_psy.type = POWER_SUPPLY_TYPE_BATTERY;
di->chargalg_psy.properties = abx500_chargalg_props;
di->chargalg_psy.num_properties = ARRAY_SIZE(abx500_chargalg_props);
di->chargalg_psy.get_property = abx500_chargalg_get_property;
- di->chargalg_psy.supplied_to = di->pdata->supplied_to;
- di->chargalg_psy.num_supplicants = di->pdata->num_supplicants;
+ di->chargalg_psy.supplied_to = supply_interface;
+ di->chargalg_psy.num_supplicants = ARRAY_SIZE(supply_interface),
di->chargalg_psy.external_power_changed =
abx500_chargalg_external_power_changed;
@@ -1843,7 +1863,7 @@ static int __devinit abx500_chargalg_probe(struct platform_device *pdev)
create_singlethread_workqueue("abx500_chargalg_wq");
if (di->chargalg_wq == NULL) {
dev_err(di->dev, "failed to create work queue\n");
- goto free_device_info;
+ return -ENOMEM;
}
/* Init work for chargalg */
@@ -1884,20 +1904,24 @@ free_psy:
power_supply_unregister(&di->chargalg_psy);
free_chargalg_wq:
destroy_workqueue(di->chargalg_wq);
-free_device_info:
- kfree(di);
return ret;
}
+static const struct of_device_id ab8500_chargalg_match[] = {
+ { .compatible = "stericsson,ab8500-chargalg", },
+ { },
+};
+
static struct platform_driver abx500_chargalg_driver = {
.probe = abx500_chargalg_probe,
.remove = __devexit_p(abx500_chargalg_remove),
.suspend = abx500_chargalg_suspend,
.resume = abx500_chargalg_resume,
.driver = {
- .name = "abx500-chargalg",
+ .name = "ab8500-chargalg",
.owner = THIS_MODULE,
+ .of_match_table = ab8500_chargalg_match,
},
};
diff --git a/include/linux/mfd/abx500.h b/include/linux/mfd/abx500.h
index 33f2c58..2138bd3 100644
--- a/include/linux/mfd/abx500.h
+++ b/include/linux/mfd/abx500.h
@@ -274,12 +274,6 @@ struct abx500_bm_data {
extern struct abx500_bm_data ab8500_bm_data;
-struct abx500_bmdevs_plat_data {
- char **supplied_to;
- size_t num_supplicants;
- bool autopower_cfg;
-};
-
enum {
NTC_EXTERNAL = 0,
NTC_INTERNAL,
--
1.7.10.4
On Fri, Nov 23, 2012 at 12:13:44AM +0530, Rajanikanth H.V wrote:
[...]
> +/*
> + * Note that the batres_vs_temp table must be strictly sorted by falling
> + * temperature values to work.
> + */
> +struct batres_vs_temp temp_to_batres_tbl_thermistor[] = {
It must be static.
[..]
> +struct batres_vs_temp temp_to_batres_tbl_ext_thermistor[] = {
Ditto.
> + { 60, 300},
> + { 30, 300},
> + { 20, 300},
> + { 10, 300},
> + { 00, 300},
> + {-10, 300},
> + {-20, 300},
> +};
> +
> +/* battery resistance table for LI ION 9100 battery */
> +struct batres_vs_temp temp_to_batres_tbl_9100[] = {
Ditto.
There are other issues, which I fixed in my tree for the previous series.
So the previous series already merged, please post patches on top of it.
Thanks,
Anton.
From: "Rajanikanth H.V" <[email protected]>
This patch adds device tree support for
battery-temperature-monitor driver
Signed-off-by: Rajanikanth H.V <[email protected]>
---
Documentation/devicetree/bindings/mfd/ab8500.txt | 6 ++
.../bindings/power_supply/ab8500/btemp.txt | 16 +++++
arch/arm/boot/dts/dbx5x0.dtsi | 5 ++
drivers/mfd/ab8500-core.c | 5 ++
drivers/power/Kconfig | 6 --
drivers/power/ab8500_bmdata.c | 4 +-
drivers/power/ab8500_btemp.c | 65 ++++++++++++--------
7 files changed, 73 insertions(+), 34 deletions(-)
create mode 100644 Documentation/devicetree/bindings/power_supply/ab8500/btemp.txt
diff --git a/Documentation/devicetree/bindings/mfd/ab8500.txt b/Documentation/devicetree/bindings/mfd/ab8500.txt
index 6ca8d81..f2ee0e7 100644
--- a/Documentation/devicetree/bindings/mfd/ab8500.txt
+++ b/Documentation/devicetree/bindings/mfd/ab8500.txt
@@ -30,6 +30,12 @@ ab8500-fg : : vddadc : Fuel Gauge
: LOW_BAT_F : : LOW threshold battery voltage
: CC_INT_CALIB : : Coulomb Counter Internal Calibration
: CCEOC : : Coulomb Counter End of Conversion
+ab8500-btemp : : vtvout : Battery Temperature
+ : BAT_CTRL_INDB : : Battery Removal Indicator
+ : BTEMP_LOW : : Btemp < BtempLow, if battery temperature is lower than -10°C
+ : BTEMP_LOW_MEDIUM : : BtempLow < Btemp < BtempMedium,if battery temperature is between -10 and 0°C
+ : BTEMP_MEDIUM_HIGH : : BtempMedium < Btemp < BtempHigh,if battery temperature is between 0°C and“MaxTemp
+ : BTEMP_HIGH : : Btemp > BtempHigh, if battery temperature is higher than “MaxTemp
ab8500-gpadc : HW_CONV_END : vddadc : Analogue to Digital Converter
SW_CONV_END : :
ab8500-gpio : : : GPIO Controller
diff --git a/Documentation/devicetree/bindings/power_supply/ab8500/btemp.txt b/Documentation/devicetree/bindings/power_supply/ab8500/btemp.txt
new file mode 100644
index 0000000..0ba1bcc
--- /dev/null
+++ b/Documentation/devicetree/bindings/power_supply/ab8500/btemp.txt
@@ -0,0 +1,16 @@
+=== AB8500 Battery Temperature Monitor Driver ===
+
+The properties below describes the node for btemp driver.
+
+Required Properties:
+- compatible = Shall be: "stericsson,ab8500-btemp"
+- battery = Shall be battery specific information
+
+ Example:
+ ab8500_btemp {
+ compatible = "stericsson,ab8500-btemp";
+ battery = <&ab8500_battery>;
+ };
+
+For information on battery specific node, Ref:
+Documentation/devicetree/bindings/power_supply/ab8500/fg.txt
diff --git a/arch/arm/boot/dts/dbx5x0.dtsi b/arch/arm/boot/dts/dbx5x0.dtsi
index 155cf53..3f1d899 100644
--- a/arch/arm/boot/dts/dbx5x0.dtsi
+++ b/arch/arm/boot/dts/dbx5x0.dtsi
@@ -357,6 +357,11 @@
thermistor-on-batctrl;
};
+ ab8500-btemp {
+ compatible = "stericsson,ab8500-btemp";
+ battery = <&ab8500_battery>;
+ };
+
ab8500-fg {
compatible = "stericsson,ab8500-fg";
battery = <&ab8500_battery>;
diff --git a/drivers/mfd/ab8500-core.c b/drivers/mfd/ab8500-core.c
index 7c3017b..94d45be 100644
--- a/drivers/mfd/ab8500-core.c
+++ b/drivers/mfd/ab8500-core.c
@@ -1046,8 +1046,13 @@ static struct mfd_cell __devinitdata ab8500_bm_devs[] = {
},
{
.name = "ab8500-btemp",
+ .of_compatible = "stericsson,ab8500-btemp",
.num_resources = ARRAY_SIZE(ab8500_btemp_resources),
.resources = ab8500_btemp_resources,
+#ifndef CONFIG_OF
+ .platform_data = &ab8500_bm_data,
+ .pdata_size = sizeof(ab8500_bm_data),
+#endif
},
{
.name = "ab8500-fg",
diff --git a/drivers/power/Kconfig b/drivers/power/Kconfig
index 49a8939..027f74e 100644
--- a/drivers/power/Kconfig
+++ b/drivers/power/Kconfig
@@ -329,12 +329,6 @@ config AB8500_BM
help
Say Y to include support for AB8500 battery management.
-config AB8500_BATTERY_THERM_ON_BATCTRL
- bool "Thermistor connected on BATCTRL ADC"
- depends on AB8500_BM
- help
- Say Y to enable battery temperature measurements using
- thermistor connected on BATCTRL ADC.
endif # POWER_SUPPLY
source "drivers/power/avs/Kconfig"
diff --git a/drivers/power/ab8500_bmdata.c b/drivers/power/ab8500_bmdata.c
index 0366270..ff8f055 100644
--- a/drivers/power/ab8500_bmdata.c
+++ b/drivers/power/ab8500_bmdata.c
@@ -29,7 +29,7 @@ static struct abx500_res_to_temp temp_tbl_A_thermistor[] = {
{65, 12500},
};
static struct abx500_res_to_temp temp_tbl_B_thermistor[] = {
- {-5, 165418},
+ {-5, 200000},
{ 0, 159024},
{ 5, 151921},
{10, 144300},
@@ -237,7 +237,7 @@ struct abx500_battery_type bat_type_thermistor[] = {
},
{
.name = POWER_SUPPLY_TECHNOLOGY_LIPO,
- .resis_high = 165418,
+ .resis_high = 200000,
.resis_low = 82869,
.battery_resistance = 300,
.charge_full_design = 900,
diff --git a/drivers/power/ab8500_btemp.c b/drivers/power/ab8500_btemp.c
index abc2abc..b5dfc77 100644
--- a/drivers/power/ab8500_btemp.c
+++ b/drivers/power/ab8500_btemp.c
@@ -20,11 +20,13 @@
#include <linux/power_supply.h>
#include <linux/completion.h>
#include <linux/workqueue.h>
-#include <linux/mfd/abx500/ab8500.h>
+#include <linux/jiffies.h>
+#include <linux/of.h>
+#include <linux/mfd/core.h>
#include <linux/mfd/abx500.h>
+#include <linux/mfd/abx500/ab8500.h>
#include <linux/mfd/abx500/ab8500-bm.h>
#include <linux/mfd/abx500/ab8500-gpadc.h>
-#include <linux/jiffies.h>
#define VTVOUT_V 1800
@@ -76,7 +78,6 @@ struct ab8500_btemp_ranges {
* @parent: Pointer to the struct ab8500
* @gpadc: Pointer to the struct gpadc
* @fg: Pointer to the struct fg
- * @pdata: Pointer to the abx500_btemp platform data
* @bat: Pointer to the abx500_bm platform data
* @btemp_psy: Structure for BTEMP specific battery properties
* @events: Structure for information about events triggered
@@ -93,7 +94,6 @@ struct ab8500_btemp {
struct ab8500 *parent;
struct ab8500_gpadc *gpadc;
struct ab8500_fg *fg;
- struct abx500_bmdevs_plat_data *pdata;
struct abx500_bm_data *bat;
struct power_supply btemp_psy;
struct ab8500_btemp_events events;
@@ -955,48 +955,58 @@ static int __devexit ab8500_btemp_remove(struct platform_device *pdev)
flush_scheduled_work();
power_supply_unregister(&di->btemp_psy);
platform_set_drvdata(pdev, NULL);
- kfree(di);
return 0;
}
+static char *supply_interface[] = {
+ "ab8500_chargalg",
+ "ab8500_fg",
+};
+
static int __devinit ab8500_btemp_probe(struct platform_device *pdev)
{
- struct abx500_bmdevs_plat_data *plat_data = pdev->dev.platform_data;
+ struct device_node *np = pdev->dev.of_node;
struct ab8500_btemp *di;
int irq, i, ret = 0;
u8 val;
- if (!plat_data) {
- dev_err(&pdev->dev, "No platform data\n");
- return -EINVAL;
+ di = devm_kzalloc(&pdev->dev, sizeof(*di), GFP_KERNEL);
+ if (!di) {
+ dev_err(&pdev->dev, "%s no mem for ab8500_btemp\n", __func__);
+ return -ENOMEM;
}
- di = kzalloc(sizeof(*di), GFP_KERNEL);
- if (!di)
- return -ENOMEM;
+ di->bat = pdev->mfd_cell->platform_data;
+ if (!di->bat) {
+ if (np) {
+ ret = bmdevs_of_probe(&pdev->dev, np, &di->bat);
+ if (ret) {
+ dev_err(&pdev->dev,
+ "failed to get battery information\n");
+ return ret;
+ }
+ } else {
+ dev_err(&pdev->dev, "missing dt node for ab8500_btemp\n");
+ return -EINVAL;
+ }
+ } else {
+ dev_info(&pdev->dev, "falling back to legacy platform data\n");
+ }
/* get parent data */
di->dev = &pdev->dev;
di->parent = dev_get_drvdata(pdev->dev.parent);
di->gpadc = ab8500_gpadc_get("ab8500-gpadc.0");
- /* get btemp specific platform data */
- di->pdata = plat_data;
- if (!di->pdata) {
- dev_err(di->dev, "no btemp platform data supplied\n");
- ret = -EINVAL;
- goto free_device_info;
- }
-
/* BTEMP supply */
di->btemp_psy.name = "ab8500_btemp";
di->btemp_psy.type = POWER_SUPPLY_TYPE_BATTERY;
di->btemp_psy.properties = ab8500_btemp_props;
di->btemp_psy.num_properties = ARRAY_SIZE(ab8500_btemp_props);
di->btemp_psy.get_property = ab8500_btemp_get_property;
- di->btemp_psy.supplied_to = di->pdata->supplied_to;
- di->btemp_psy.num_supplicants = di->pdata->num_supplicants;
+ di->btemp_psy.supplied_to = supply_interface;
+ di->btemp_psy.num_supplicants = ARRAY_SIZE(supply_interface);
di->btemp_psy.external_power_changed =
ab8500_btemp_external_power_changed;
@@ -1006,8 +1016,7 @@ static int __devinit ab8500_btemp_probe(struct platform_device *pdev)
create_singlethread_workqueue("ab8500_btemp_wq");
if (di->btemp_wq == NULL) {
dev_err(di->dev, "failed to create work queue\n");
- ret = -ENOMEM;
- goto free_device_info;
+ return -ENOMEM;
}
/* Init work for measuring temperature periodically */
@@ -1085,12 +1094,15 @@ free_irq:
}
free_btemp_wq:
destroy_workqueue(di->btemp_wq);
-free_device_info:
- kfree(di);
return ret;
}
+static const struct of_device_id ab8500_btemp_match[] = {
+ { .compatible = "stericsson,ab8500-btemp", },
+ { },
+};
+
static struct platform_driver ab8500_btemp_driver = {
.probe = ab8500_btemp_probe,
.remove = __devexit_p(ab8500_btemp_remove),
@@ -1099,6 +1111,7 @@ static struct platform_driver ab8500_btemp_driver = {
.driver = {
.name = "ab8500-btemp",
.owner = THIS_MODULE,
+ .of_match_table = ab8500_btemp_match,
},
};
--
1.7.10.4
> On Fri, Nov 23, 2012 at 12:13:44AM +0530, Rajanikanth H.V wrote:
> [...]
> > +/*
> > + * Note that the batres_vs_temp table must be strictly sorted by falling
> > + * temperature values to work.
> > + */
> > +struct batres_vs_temp temp_to_batres_tbl_thermistor[] = {
>
> It must be static.
>
> [..]
> > +struct batres_vs_temp temp_to_batres_tbl_ext_thermistor[] = {
>
> Ditto.
>
> > + { 60, 300},
> > + { 30, 300},
> > + { 20, 300},
> > + { 10, 300},
> > + { 00, 300},
> > + {-10, 300},
> > + {-20, 300},
> > +};
> > +
> > +/* battery resistance table for LI ION 9100 battery */
> > +struct batres_vs_temp temp_to_batres_tbl_9100[] = {
>
> Ditto.
>
> There are other issues, which I fixed in my tree for the previous series.
> So the previous series already merged, please post patches on top of it.
Ah, I see now. My apologies, I'll re-comment.
--
Lee Jones
Linaro ST-Ericsson Landing Team Lead
Linaro.org │ Open source software for ARM SoCs
Follow Linaro: Facebook | Twitter | Blog