From: "Ivan T. Ivanov" <[email protected]>
Hi,
This series intend to fix driver, which was broken for a while.
It is used to create peripheral role device, which in coordination
with phy-usb-msm driver will provide USB2.0 gadget support for
Qualcomm targets.
Changes since initial version.
- Address comments from Peter - better description of the changes.
- Drop patch 4 - till USB PHY driver is ready
Ivan T. Ivanov (3):
usb: chipidea: msm: Add device tree binding information
usb: chipidea: msm: Add device tree support
usb: chipidea: msm: Initialize offset of the capability registers
.../devicetree/bindings/usb/msm-hsusb.txt | 17 ++++++++++++++
drivers/usb/chipidea/ci_hdrc_msm.c | 24 +++++++++++++++++++-
2 files changed, 40 insertions(+), 1 deletion(-)
--
1.7.9.5
From: "Ivan T. Ivanov" <[email protected]>
Since commit 62bb84e (usb: gadget: ci13xxx: convert to platform device)
start address of the capability registers is not passed correctly to
udc_probe(). Fix this.
Signed-off-by: Ivan T. Ivanov <[email protected]>
---
drivers/usb/chipidea/ci_hdrc_msm.c | 1 +
1 file changed, 1 insertion(+)
diff --git a/drivers/usb/chipidea/ci_hdrc_msm.c b/drivers/usb/chipidea/ci_hdrc_msm.c
index 3f67f1f..7ed3fad 100644
--- a/drivers/usb/chipidea/ci_hdrc_msm.c
+++ b/drivers/usb/chipidea/ci_hdrc_msm.c
@@ -47,6 +47,7 @@ static void ci_hdrc_msm_notify_event(struct ci_hdrc *ci, unsigned event)
static struct ci_hdrc_platform_data ci_hdrc_msm_platdata = {
.name = "ci_hdrc_msm",
+ .capoffset = DEF_CAPOFFSET,
.flags = CI_HDRC_REGS_SHARED |
CI_HDRC_REQUIRE_TRANSCEIVER |
CI_HDRC_DISABLE_STREAMING,
--
1.7.9.5
From: "Ivan T. Ivanov" <[email protected]>
Document device tree binding information as required by
the Qualcomm USB controller.
Signed-off-by: Ivan T. Ivanov <[email protected]>
---
.../devicetree/bindings/usb/msm-hsusb.txt | 17 +++++++++++++++++
1 file changed, 17 insertions(+)
diff --git a/Documentation/devicetree/bindings/usb/msm-hsusb.txt b/Documentation/devicetree/bindings/usb/msm-hsusb.txt
index 5ea26c6..d4e7e41 100644
--- a/Documentation/devicetree/bindings/usb/msm-hsusb.txt
+++ b/Documentation/devicetree/bindings/usb/msm-hsusb.txt
@@ -15,3 +15,20 @@ Example EHCI controller device node:
usb-phy = <&usb_otg>;
};
+CI13xxx (Chipidea) USB controllers
+
+Required properties:
+- compatible: should contain "qcom,ci-hdrc"
+- reg: offset and length of the register set in the memory map
+- interrupts: interrupt-specifier for the controller interrupt.
+- usb-phy: phandle for the PHY device
+- dr_mode: Sould be "peripheral"
+
+ gadget@f9a55000 {
+ compatible = "qcom,ci-hdrc";
+ reg = <0xf9a55000 0x400>;
+ dr_mode = "peripheral";
+ interrupts = <0 134 0>;
+ usb-phy = <&usb_otg>;
+ };
+
--
1.7.9.5
From: "Ivan T. Ivanov" <[email protected]>
Allows controller to be specified via device tree.
Pass PHY phandle specified in DT to core driver.
Signed-off-by: Ivan T. Ivanov <[email protected]>
---
drivers/usb/chipidea/ci_hdrc_msm.c | 23 ++++++++++++++++++++++-
1 file changed, 22 insertions(+), 1 deletion(-)
diff --git a/drivers/usb/chipidea/ci_hdrc_msm.c b/drivers/usb/chipidea/ci_hdrc_msm.c
index 2d51d85..3f67f1f 100644
--- a/drivers/usb/chipidea/ci_hdrc_msm.c
+++ b/drivers/usb/chipidea/ci_hdrc_msm.c
@@ -57,9 +57,21 @@ static struct ci_hdrc_platform_data ci_hdrc_msm_platdata = {
static int ci_hdrc_msm_probe(struct platform_device *pdev)
{
struct platform_device *plat_ci;
+ struct usb_phy *phy;
dev_dbg(&pdev->dev, "ci_hdrc_msm_probe\n");
+ /*
+ * OTG(PHY) driver takes care of PHY initialization, clock management,
+ * powering up VBUS, mapping of registers address space and power
+ * management.
+ */
+ phy = devm_usb_get_phy_by_phandle(&pdev->dev, "usb-phy", 0);
+ if (IS_ERR(phy))
+ return PTR_ERR(phy);
+
+ ci_hdrc_msm_platdata.phy = phy;
+
plat_ci = ci_hdrc_add_device(&pdev->dev,
pdev->resource, pdev->num_resources,
&ci_hdrc_msm_platdata);
@@ -86,10 +98,19 @@ static int ci_hdrc_msm_remove(struct platform_device *pdev)
return 0;
}
+static struct of_device_id msm_ci_dt_match[] = {
+ { .compatible = "qcom,ci-hdrc", },
+ { }
+};
+MODULE_DEVICE_TABLE(of, msm_ci_dt_match);
+
static struct platform_driver ci_hdrc_msm_driver = {
.probe = ci_hdrc_msm_probe,
.remove = ci_hdrc_msm_remove,
- .driver = { .name = "msm_hsusb", },
+ .driver = {
+ .name = "msm_hsusb",
+ .of_match_table = msm_ci_dt_match,
+ },
};
module_platform_driver(ci_hdrc_msm_driver);
--
1.7.9.5
Hey Ivan-
Nit below.
On Tue, Feb 18, 2014 at 03:21:20PM +0200, Ivan T. Ivanov wrote:
> From: "Ivan T. Ivanov" <[email protected]>
>
> Allows controller to be specified via device tree.
> Pass PHY phandle specified in DT to core driver.
>
> Signed-off-by: Ivan T. Ivanov <[email protected]>
> ---
> drivers/usb/chipidea/ci_hdrc_msm.c | 23 ++++++++++++++++++++++-
> 1 file changed, 22 insertions(+), 1 deletion(-)
>
> diff --git a/drivers/usb/chipidea/ci_hdrc_msm.c b/drivers/usb/chipidea/ci_hdrc_msm.c
> index 2d51d85..3f67f1f 100644
> --- a/drivers/usb/chipidea/ci_hdrc_msm.c
> +++ b/drivers/usb/chipidea/ci_hdrc_msm.c
> @@ -57,9 +57,21 @@ static struct ci_hdrc_platform_data ci_hdrc_msm_platdata = {
> static int ci_hdrc_msm_probe(struct platform_device *pdev)
> {
> struct platform_device *plat_ci;
> + struct usb_phy *phy;
>
> dev_dbg(&pdev->dev, "ci_hdrc_msm_probe\n");
>
> + /*
> + * OTG(PHY) driver takes care of PHY initialization, clock management,
> + * powering up VBUS, mapping of registers address space and power
> + * management.
> + */
> + phy = devm_usb_get_phy_by_phandle(&pdev->dev, "usb-phy", 0);
> + if (IS_ERR(phy))
> + return PTR_ERR(phy);
> +
> + ci_hdrc_msm_platdata.phy = phy;
> +
> plat_ci = ci_hdrc_add_device(&pdev->dev,
> pdev->resource, pdev->num_resources,
> &ci_hdrc_msm_platdata);
> @@ -86,10 +98,19 @@ static int ci_hdrc_msm_remove(struct platform_device *pdev)
> return 0;
> }
>
> +static struct of_device_id msm_ci_dt_match[] = {
const?
> + { .compatible = "qcom,ci-hdrc", },
> + { }
> +};
> +MODULE_DEVICE_TABLE(of, msm_ci_dt_match);
--
Qualcomm Innovation Center, Inc. is a member of Code Aurora Forum,
hosted by The Linux Foundation
On Tue, Feb 18, 2014 at 03:21:19PM +0200, Ivan T. Ivanov wrote:
> From: "Ivan T. Ivanov" <[email protected]>
>
> Document device tree binding information as required by
> the Qualcomm USB controller.
>
> Signed-off-by: Ivan T. Ivanov <[email protected]>
> ---
> .../devicetree/bindings/usb/msm-hsusb.txt | 17 +++++++++++++++++
Is this really the appropriate place to document this? It seems like
this binding doc should be merged with the i.MX ci13xxx binding in a
common ci13xxx doc.
--
Qualcomm Innovation Center, Inc. is a member of Code Aurora Forum,
hosted by The Linux Foundation
Hello.
On 02/18/2014 04:21 PM, Ivan T. Ivanov wrote:
> From: "Ivan T. Ivanov" <[email protected]>
> Allows controller to be specified via device tree.
> Pass PHY phandle specified in DT to core driver.
> Signed-off-by: Ivan T. Ivanov <[email protected]>
> ---
> drivers/usb/chipidea/ci_hdrc_msm.c | 23 ++++++++++++++++++++++-
> 1 file changed, 22 insertions(+), 1 deletion(-)
You also need to describe the binding you're creating in
Documentation/devicetree/bindings/usb/<file>.txt.
WBR, Sergei
Hi,
On Tue, 2014-02-18 at 20:53 +0300, Sergei Shtylyov wrote:
> Hello.
>
> On 02/18/2014 04:21 PM, Ivan T. Ivanov wrote:
>
> > From: "Ivan T. Ivanov" <[email protected]>
>
> > Allows controller to be specified via device tree.
> > Pass PHY phandle specified in DT to core driver.
>
> > Signed-off-by: Ivan T. Ivanov <[email protected]>
> > ---
> > drivers/usb/chipidea/ci_hdrc_msm.c | 23 ++++++++++++++++++++++-
> > 1 file changed, 22 insertions(+), 1 deletion(-)
>
> You also need to describe the binding you're creating in
> Documentation/devicetree/bindings/usb/<file>.txt.
Did you check "[PATCH v2 1/3]"?
Regards,
Ivan
>
> WBR, Sergei
>
On Tue, 2014-02-18 at 08:08 -0600, Josh Cartwright wrote:
> Hey Ivan-
>
> Nit below.
>
> On Tue, Feb 18, 2014 at 03:21:20PM +0200, Ivan T. Ivanov wrote:
> >
> > +static struct of_device_id msm_ci_dt_match[] = {
>
> const?
>
Thanks, will do.
Regards,
Ivan
> > + { .compatible = "qcom,ci-hdrc", },
> > + { }
> > +};
> > +MODULE_DEVICE_TABLE(of, msm_ci_dt_match);
>
Hi,
On Tue, 2014-02-18 at 10:13 -0600, Josh Cartwright wrote:
> On Tue, Feb 18, 2014 at 03:21:19PM +0200, Ivan T. Ivanov wrote:
> > From: "Ivan T. Ivanov" <[email protected]>
> >
> > Document device tree binding information as required by
> > the Qualcomm USB controller.
> >
> > Signed-off-by: Ivan T. Ivanov <[email protected]>
> > ---
> > .../devicetree/bindings/usb/msm-hsusb.txt | 17 +++++++++++++++++
>
> Is this really the appropriate place to document this? It seems like
> this binding doc should be merged with the i.MX ci13xxx binding in a
> common ci13xxx doc.
>
This driver is a "glue" layer driver which control Qualcomm
specific logic around Chipidea IP core. It is supposed to
hold "non standard" Chipidea properties, but I suppose that
ci-hdrc-qcom.txt will be better name and will be similar to
i.MX chosen name.
What do you think?
Regards,
Ivan
On 02/18/2014 08:14 PM, Ivan T. Ivanov wrote:
>>> From: "Ivan T. Ivanov" <[email protected]>
>>> Allows controller to be specified via device tree.
>>> Pass PHY phandle specified in DT to core driver.
>>> Signed-off-by: Ivan T. Ivanov <[email protected]>
>>> ---
>>> drivers/usb/chipidea/ci_hdrc_msm.c | 23 ++++++++++++++++++++++-
>>> 1 file changed, 22 insertions(+), 1 deletion(-)
>> You also need to describe the binding you're creating in
>> Documentation/devicetree/bindings/usb/<file>.txt.
> Did you check "[PATCH v2 1/3]"?
Did you send it to 'linux-usb'? I just didn't get the patch.
(Typically, the bindings are described in the same patch the DT support is
added to the driver bu YMMV, of course.)
> Regards,
> Ivan
WBR, Sergei
On Tue, Feb 18, 2014 at 07:27:00PM +0200, Ivan T. Ivanov wrote:
> On Tue, 2014-02-18 at 10:13 -0600, Josh Cartwright wrote:
> > On Tue, Feb 18, 2014 at 03:21:19PM +0200, Ivan T. Ivanov wrote:
> > > .../devicetree/bindings/usb/msm-hsusb.txt | 17 +++++++++++++++++
> >
> > Is this really the appropriate place to document this? It seems like
> > this binding doc should be merged with the i.MX ci13xxx binding in a
> > common ci13xxx doc.
> >
>
> This driver is a "glue" layer driver which control Qualcomm
> specific logic around Chipidea IP core. It is supposed to
> hold "non standard" Chipidea properties, but I suppose that
> ci-hdrc-qcom.txt will be better name and will be similar to
> i.MX chosen name.
>
> What do you think?
Sounds like an improvement to me.
--
Qualcomm Innovation Center, Inc. is a member of Code Aurora Forum,
hosted by The Linux Foundation
On Tue, Feb 18, 2014 at 02:21:19PM +0100, Ivan T. Ivanov wrote:
> From: "Ivan T. Ivanov" <[email protected]>
>
> Document device tree binding information as required by
> the Qualcomm USB controller.
>
> Signed-off-by: Ivan T. Ivanov <[email protected]>
> ---
> .../devicetree/bindings/usb/msm-hsusb.txt | 17 +++++++++++++++++
Although you mentioned to Josh that this is intended for "non-standard"
Chipidea properties, I don't see any other than requiring that 'dr_mode'
must be "peripheral". It would seem that this should all be integrated
into a ci3xxx.txt.
> 1 file changed, 17 insertions(+)
>
> diff --git a/Documentation/devicetree/bindings/usb/msm-hsusb.txt b/Documentation/devicetree/bindings/usb/msm-hsusb.txt
> index 5ea26c6..d4e7e41 100644
> --- a/Documentation/devicetree/bindings/usb/msm-hsusb.txt
> +++ b/Documentation/devicetree/bindings/usb/msm-hsusb.txt
> @@ -15,3 +15,20 @@ Example EHCI controller device node:
> usb-phy = <&usb_otg>;
> };
>
> +CI13xxx (Chipidea) USB controllers
> +
> +Required properties:
> +- compatible: should contain "qcom,ci-hdrc"
Is there nothing more specific you could put here? Maybe a hardware
revision, or something?
> +- reg: offset and length of the register set in the memory map
> +- interrupts: interrupt-specifier for the controller interrupt.
> +- usb-phy: phandle for the PHY device
> +- dr_mode: Sould be "peripheral"
s/Sould/should/
-Courtney
On Tue, Feb 18, 2014 at 07:31:55PM +0100, Sergei Shtylyov wrote:
> On 02/18/2014 08:14 PM, Ivan T. Ivanov wrote:
>
> >>> From: "Ivan T. Ivanov" <[email protected]>
>
> >>> Allows controller to be specified via device tree.
> >>> Pass PHY phandle specified in DT to core driver.
>
> >>> Signed-off-by: Ivan T. Ivanov <[email protected]>
> >>> ---
> >>> drivers/usb/chipidea/ci_hdrc_msm.c | 23 ++++++++++++++++++++++-
> >>> 1 file changed, 22 insertions(+), 1 deletion(-)
>
> >> You also need to describe the binding you're creating in
> >> Documentation/devicetree/bindings/usb/<file>.txt.
>
> > Did you check "[PATCH v2 1/3]"?
>
> Did you send it to 'linux-usb'? I just didn't get the patch.
> (Typically, the bindings are described in the same patch the DT support is
> added to the driver bu YMMV, of course.)
Although I would personally agree that this is the most logical method,
it would appear that the DT guys disagree with us [1]. Lately, they
seem to have either given up or are otherwise preoccupied, so perhaps
you can still slip a few patches by them. ;)
-Courtney
[1] https://git.kernel.org/cgit/linux/kernel/git/torvalds/linux.git/tree/Documentation/devicetree/bindings/submitting-patches.txt
Hello.
On 02/19/2014 12:34 AM, Courtney Cavin wrote:
>>>>> From: "Ivan T. Ivanov" <[email protected]>
>>>>> Allows controller to be specified via device tree.
>>>>> Pass PHY phandle specified in DT to core driver.
>>>>> Signed-off-by: Ivan T. Ivanov <[email protected]>
>>>>> ---
>>>>> drivers/usb/chipidea/ci_hdrc_msm.c | 23 ++++++++++++++++++++++-
>>>>> 1 file changed, 22 insertions(+), 1 deletion(-)
>>>> You also need to describe the binding you're creating in
>>>> Documentation/devicetree/bindings/usb/<file>.txt.
>>> Did you check "[PATCH v2 1/3]"?
>> Did you send it to 'linux-usb'? I just didn't get the patch.
>> (Typically, the bindings are described in the same patch the DT support is
>> added to the driver bu YMMV, of course.)
> Although I would personally agree that this is the most logical method,
> it would appear that the DT guys disagree with us [1]. Lately, they
Thank you for the reference.
> seem to have either given up or are otherwise preoccupied, so perhaps
> you can still slip a few patches by them. ;)
Yeah, I was at last able to get my Ethernet driver bindings applied. :-)
> -Courtney
> [1] https://git.kernel.org/cgit/linux/kernel/git/torvalds/linux.git/tree/Documentation/devicetree/bindings/submitting-patches.txt
WBR, Sergei
Ivan,
I'm having tremendous problems getting this driver to initialize. For
some reason, I can't get the driver to actually transition the
hardware into peripheral mode. At first I was getting a lot of probe
deferrals, based on not finding the regulators early enough in the
boot, and I thought it was an issue with the gadget drivers loading
before the driver could complete its setup. However, I switched
everything to loading via modules, and now have less probe deferrals,
but I still can't get the driver to activate. I see zero interrupts.
In particular the routine hw_device_state (which turns on interrupts
in the controller) is never called, because I can't get
msm_otg_start_peripheral to actually kick the hardware.
I've sprinkled the code in drivers/usb/chipidea and
drivers/usb/phy/phy-msm-usb.c liberally with printks and WARNs to help
me see what's going on, but I'm having a hard time tracing it down.
I'm pretty sure I've got the DTS correct, but my USB config might not
match yours. (Would you mind sharing your config?).
I tried configuring the qcom,otg-control for user controlled mode
setting (via debugfs), and even with doing "echo "peripheral"
>/sys/kernel/debug/msm_otg/mode, it just wouldn't start the hardware
(call hw_device_state(...1)).
Any ideas you can provide would be welcome (e.g. for things to try,
look at, etc.)
My kernel is based on an internal Sony 3.13-rc6 kernel with clock and
regulator patches applied, as well as your phy-msm-usb.c patches from
November and your chipidea patches from yesterday.
Thanks,
-- Tim
In the printk dump below,
UBTO=udc_bind_to_driver
CIS=ci_udc_start
MOSP=msm_otg_set_peripheral
MOSW=msm_otg_sm_work
[10] platform_init()
[10] target_init()
[10] Display Init: Start
[10] display_init(),target_id=10.
[30] Config MIPI_VIDEO_PANEL.
[30] Turn on MIPI_VIDEO_PANEL.
[50] Video lane tested successfully
[50] Display Init: Done
[70] partition misc doesn't exist
[80] error in emmc_recovery_init
[80] No 'misc' partition found
[80] Error reading MISC partition
[80] failed to get ffbm cookie[90] use_signed_kernel=1, is_unlocked=0,
is_tampered=1.
[90] Loading boot image (7829504): start
[550] Loading boot image (7829504): done
[550] Found Appeneded Flattened Device tree
[550] cmdline: console=ttyMSM,115200,n8 androidboot.hardware=qcom
user_debug=31 maxcpus=2 msm_rtb.filter=0x37 ehci-hcd.park=3 earl
yprintk debug androidboot.emmc=true androidboot.serialno=40081a14
androidboot.baseband=apq
[570] Updating device tree: start
[570] Updating device tree: done
[580] booting linux @ 0x8000, ramdisk @ 0x2000000 (4234892),
tags/device tree @ 0x1e00000
[580] Turn off MIPI_VIDEO_PANEL.
[580] Continuous splash enabled, keeping panel alive.
Uncompressing Linux... done, booting the kernel.
[ 0.000000] Booting Linux on physical CPU 0x0
[ 0.000000] TRB: version 88888
[ 0.000000] Linux version 3.13.0-rc6-00147-g00bb56a-dirty
(10102229@ussvlx8980) (gcc version 4.6.x-google 20120106 (prerelease)
(GCC) ) #40 SMP PREEMPT Tue Feb 18 19:24:12 PST 2014
[ 0.000000] CPU: ARMv7 Processor [512f06f0] revision 0 (ARMv7), cr=10c5387d
[ 0.000000] CPU: PIPT / VIPT nonaliasing data cache, PIPT instruction cache
[ 0.000000] Machine model: Qualcomm APQ8074 Dragonboard
[ 0.000000] bootconsole [earlycon0] enabled
[ 0.000000] Memory policy: Data cache writealloc
[ 0.000000] On node 0 totalpages: 524288
[ 0.000000] free_area_init_node: node 0, pgdat c0908d80,
node_mem_map c0980000
[ 0.000000] Normal zone: 1520 pages used for memmap
[ 0.000000] Normal zone: 0 pages reserved
[ 0.000000] Normal zone: 194560 pages, LIFO batch:31
[ 0.000000] HighMem zone: 2576 pages used for memmap
[ 0.000000] HighMem zone: 329728 pages, LIFO batch:31
[ 0.000000] PERCPU: Embedded 8 pages/cpu @c1993000 s12224 r8192 d12352 u32768
[ 0.000000] pcpu-alloc: s12224 r8192 d12352 u32768 alloc=8*4096
[ 0.000000] pcpu-alloc: [0] 0 [0] 1 [0] 2 [0] 3
[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on.
Total pages: 522768
[ 0.000000] Kernel command line: console=ttyMSM,115200,n8
androidboot.hardware=qcom user_debug=31 maxcpus=2 msm_rtb.filter=0x37
ehci-hcd.park=3 earlyprintk debug androidboot.emmc=true
androidboot.serialno=40081a14 androidboot.baseband=apq
[ 0.000000] PID hash table entries: 4096 (order: 2, 16384 bytes)
[ 0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
[ 0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
[ 0.000000] Memory: 2067932K/2097152K available (4734K kernel code,
262K rwdata, 1912K rodata, 287K init, 446K bss, 29220K rese
rved, 1318912K highmem)
[ 0.000000] Virtual kernel memory layout:
[ 0.000000] vector : 0xffff0000 - 0xffff1000 ( 4 kB)
[ 0.000000] fixmap : 0xfff00000 - 0xfffe0000 ( 896 kB)
[ 0.000000] vmalloc : 0xf0000000 - 0xff000000 ( 240 MB)
[ 0.000000] lowmem : 0xc0000000 - 0xef800000 ( 760 MB)
[ 0.000000] pkmap : 0xbfe00000 - 0xc0000000 ( 2 MB)
[ 0.000000] modules : 0xbf000000 - 0xbfe00000 ( 14 MB)
[ 0.000000] .text : 0xc0208000 - 0xc0885ddc (6648 kB)
[ 0.000000] .init : 0xc0886000 - 0xc08cdfc0 ( 288 kB)
[ 0.000000] .data : 0xc08ce000 - 0xc090fa2c ( 263 kB)
[ 0.000000] .bss : 0xc090fa2c - 0xc097f41c ( 447 kB)
[ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
[ 0.000000] Preemptible hierarchical RCU implementation.
[ 0.000000] NR_IRQS:16 nr_irqs:16 16
[ 0.000000] Architected cp15 and mmio timer(s) running at 19.20MHz
(virt/virt).
[ 0.000000] sched_clock: 56 bits at 19MHz, resolution 52ns, wraps
every 3579139424256ns
[ 0.000000] Switching to timer-based delay loop
[ 0.000000] Console: colour dummy device 80x30
[ 0.009136] Calibrating delay loop (skipped), value calculated
using timer frequency.. 38.40 BogoMIPS (lpj=192000)
[ 0.019534] pid_max: default: 32768 minimum: 301
[ 0.024381] Mount-cache hash table entries: 512
[ 0.029531] CPU: Testing write buffer coherency: ok
[ 0.033968] CPU0: thread -1, cpu 0, socket 0, mpidr 80000000
[ 0.039532] Setting up static identity map for 0x67ea90 - 0x67eae8
[ 0.119863] CPU1: failed to boot: -38
[ 0.139882] CPU2: failed to boot: -38
[ 0.159917] CPU3: failed to boot: -38
[ 0.162642] Brought up 1 CPUs
[ 0.165659] SMP: Total of 1 processors activated.
[ 0.170461] CPU: All CPU(s) started in SVC mode.
[ 0.184193] VFP support v0.3: implementor 51 architecture 0 part 6f
variant 2 rev 0
[ 0.191979] pinctrl core: initialized pinctrl subsystem
[ 0.196492] regulator-dummy: no parameters
[ 0.200452] TRB: in really_probe, ret=0
[ 0.204515] NET: Registered protocol family 16
[ 0.209063] DMA: preallocated 256 KiB pool for atomic coherent allocations
[ 0.219081] TRB: in really_probe, ret=0
[ 0.222545] hw-breakpoint: found 5 (+1 reserved) breakpoint and 4
watchpoint registers.
[ 0.230052] hw-breakpoint: maximum watchpoint size is 8 bytes.
[ 0.240106] bio: create slab <bio-0> at 0
[ 0.243778] SCSI subsystem initialized
[ 0.247152] usbcore: registered new interface driver usbfs
[ 0.252612] usbcore: registered new interface driver hub
[ 0.258004] usbcore: registered new device driver usb
[ 0.263289] Advanced Linux Sound Architecture Driver Initialized.
[ 0.270010] Switched to clocksource arch_sys_counter
[ 0.274304] cfg80211: Calling CRDA to update world regulatory domain
[ 0.309937] NET: Registered protocol family 2
[ 0.313777] TCP established hash table entries: 8192 (order: 3, 32768 bytes)
[ 0.320513] TCP bind hash table entries: 8192 (order: 4, 65536 bytes)
[ 0.327045] TCP: Hash tables configured (established 8192 bind 8192)
[ 0.333444] TCP: reno registered
[ 0.336696] UDP hash table entries: 512 (order: 2, 16384 bytes)
[ 0.342714] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes)
[ 0.349283] NET: Registered protocol family 1
[ 0.353842] RPC: Registered named UNIX socket transport module.
[ 0.359519] RPC: Registered udp transport module.
[ 0.364333] RPC: Registered tcp transport module.
[ 0.369068] RPC: Registered tcp NFSv4.1 backchannel transport module.
[ 0.375803] Trying to unpack rootfs image as initramfs...
[ 0.638795] Freeing initrd memory: 4132K (c2000000 - c2409000)
[ 0.644038] using sfpb hardware mutex registers (auto)
[ 0.649016] smem_of_init: initialized successfully
[ 0.654077] parse_smd_devicetree: enable_irq_wake() failed on 57
[ 0.659856] parse_smsm_devicetree: enable_irq_wake() failed on 58
[ 0.666077] parse_smd_devicetree: enable_irq_wake() failed on 188
[ 0.672205] parse_smsm_devicetree: enable_irq_wake() failed on 189
[ 0.678432] parse_smd_devicetree: enable_irq_wake() failed on 174
[ 0.684613] parse_smsm_devicetree: enable_irq_wake() failed on 176
[ 0.690865] parse_smd_devicetree: enable_irq_wake() failed on 200
[ 0.696972] SMD successfully initialized
[ 0.701124] TRB: in really_probe, ret=0
[ 0.786129] bounce pool size: 64 pages
[ 0.794349] NFS: Registering the id_resolver key type
[ 0.798479] Key type id_resolver registered
[ 0.802739] Key type id_legacy registered
[ 0.807215] fuse init (API version 7.22)
[ 0.811077] msgmni has been set to 1471
[ 0.816107] Block layer SCSI generic (bsg) driver version 0.4
loaded (major 253)
[ 0.822620] io scheduler noop registered
[ 0.826538] io scheduler deadline registered
[ 0.831027] io scheduler cfq registered (default)
[ 0.835887] msm_serial:
detecte���~�`� ��怞f���x� ��~��f��~ ������xx `� ��怞f�� f�x�~x�������� fxf���~`ff� f ��~�
f������x����������f���� ��f��fx�f�ff~`��x ������r²������msm_serial:
console setup on port #0
[ 0.867420] console [ttyMSM0] enabled
[ 0.867420] console [ttyMSM0] enabled
[ 0.874815] bootconsole [earlycon0] disabled
[ 0.874815] bootconsole [earlycon0] disabled
[ 0.883530] TRB: in really_probe, ret=0
[ 0.883579] msm_serial: driver initialized
[ 0.891693] brd: module loaded
[ 0.894145] loop: module loaded
[ 0.894631] SCSI Media Changer driver v0.25
[ 0.897697] SLIP: version 0.8.4-NET3.019-NEWTTY (dynamic channels,
max=256) (6 bit encapsulation enabled).
[ 0.901819] CSLIP: code copyright 1989 Regents of the University of
California.
[ 0.911274] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 0.918459] ehci_hcd: block sizes: qh 80 qtd 96 itd 160 sitd 96
[ 0.925083] ehci-platform: EHCI generic platform driver
[ 0.931057] mousedev: PS/2 mouse device common for all mice
[ 0.936125] i2c /dev entries driver
[ 0.941730] TRB: in really_probe, ret=0
[ 0.945275] usbcore: registered new interface driver usbhid
[ 0.948923] usbhid: USB HID core driver
[ 0.954802] TRB: in really_probe, ret=0
[ 0.958479] oprofile: no performance counters
[ 0.962228] oprofile: using timer interrupt.
[ 0.966744] TCP: cubic registered
[ 0.970994] NET: Registered protocol family 17
[ 0.974277] Key type dns_resolver registered
[ 0.978649] Registering SWP/SWPB emulation handler
[ 0.983713] 8841_s1: 675 <--> 1050 mV at 0 mV normal idle
[ 0.987620] TRB: in really_probe, ret=0
[ 0.993342] 8841_s1_ao: 675 <--> 1050 mV at 0 mV normal idle
[ 0.996805] TRB: in really_probe, ret=0
[ 1.002873] 8841_s1_so: 675 <--> 1050 mV at 675 mV normal idle
[ 1.006355] TRB: in really_probe, ret=0
[ 1.012231] TRB: in really_probe, ret=0
[ 1.016323] 8841_s2: 500 <--> 1050 mV at 0 mV normal idle
[ 1.019895] TRB: in really_probe, ret=0
[ 1.025627] 8841_s2_corner: 0 <--> 0 mV at 0 mV normal idle
[ 1.029183] TRB: in really_probe, ret=0
[ 1.035252] 8841_s2_corner_ao: 0 <--> 0 mV at 0 mV normal idle
[ 1.038656] TRB: in really_probe, ret=0
[ 1.044715] 8841_s2_floor_corner: 0 <--> 0 mV at 0 mV normal idle
[ 1.048373] TRB: in really_probe, ret=0
[ 1.054592] TRB: in really_probe, ret=0
[ 1.058597] 8841_s3: 1050 mV normal idle
[ 1.062188] TRB: in really_probe, ret=0
[ 1.066292] TRB: in really_probe, ret=0
[ 1.070249] 8841_s4: 815 <--> 900 mV at 0 mV normal idle
[ 1.073807] TRB: in really_probe, ret=0
[ 1.079501] 8841_s4_corner: 0 <--> 0 mV at 0 mV normal idle
[ 1.083026] TRB: in really_probe, ret=0
[ 1.089056] 8841_s4_floor_corner: 0 <--> 0 mV at 0 mV normal idle
[ 1.092488] TRB: in really_probe, ret=0
[ 1.098671] TRB: in really_probe, ret=0
[ 1.102721] 8941_s1: 1300 mV normal idle
[ 1.106276] TRB: in really_probe, ret=0
[ 1.110409] TRB: in really_probe, ret=0
[ 1.114333] 8941_s2: 2150 mV normal idle
[ 1.117899] TRB: in really_probe, ret=0
[ 1.122041] TRB: in really_probe, ret=0
[ 1.125965] 8941_s3: 1800 mV normal idle
[ 1.129531] TRB: in really_probe, ret=0
[ 1.133673] TRB: in really_probe, ret=0
[ 1.137588] 8941_l1: 1225 mV normal idle
[ 1.141192] TRB: in really_probe, ret=0
[ 1.145285] TRB: in really_probe, ret=0
[ 1.149226] 8941_l2: 1200 mV normal idle
[ 1.152815] TRB: in really_probe, ret=0
[ 1.156917] TRB: in really_probe, ret=0
[ 1.160884] 8941_l3: 1200 mV normal idle
[ 1.164426] TRB: in really_probe, ret=0
[ 1.168548] TRB: in really_probe, ret=0
[ 1.172515] 8941_l4: 1225 mV normal idle
[ 1.176070] TRB: in really_probe, ret=0
[ 1.180202] TRB: in really_probe, ret=0
[ 1.184129] 8941_l5: 1800 mV normal idle
[ 1.187691] TRB: in really_probe, ret=0
[ 1.191833] TRB: in really_probe, ret=0
[ 1.195758] 8941_l6: 1800 mV normal idle
[ 1.199322] TRB: in really_probe, ret=0
[ 1.203464] TRB: in really_probe, ret=0
[ 1.207404] 8941_l7: 1800 mV normal idle
[ 1.210972] TRB: in really_probe, ret=0
[ 1.215077] TRB: in really_probe, ret=0
[ 1.218824] TRB: in really_probe, ret=0
[ 1.222858] 8941_l9: 1800 <--> 2950 mV at 2950 mV normal idle
[ 1.226410] TRB: in really_probe, ret=0
[ 1.232283] TRB: in really_probe, ret=0
[ 1.236297] 8941_l10: 1800 <--> 2950 mV at 2950 mV normal idle
[ 1.239861] TRB: in really_probe, ret=0
[ 1.245738] TRB: in really_probe, ret=0
[ 1.249827] 8941_l11: 1300 mV normal idle
[ 1.253429] TRB: in really_probe, ret=0
[ 1.257524] TRB: in really_probe, ret=0
[ 1.261566] 8941_l12: 1800 mV normal idle
[ 1.265119] TRB: in really_probe, ret=0
[ 1.269432] 8941_l12_ao: 1800 mV normal idle
[ 1.273039] TRB: in really_probe, ret=0
[ 1.277489] TRB: in really_probe, ret=0
[ 1.281449] 8941_l13: 1800 <--> 2950 mV at 2950 mV normal idle
[ 1.284999] TRB: in really_probe, ret=0
[ 1.290877] TRB: in really_probe, ret=0
[ 1.294971] 8941_l14: 1800 mV normal idle
[ 1.298542] TRB: in really_probe, ret=0
[ 1.302682] TRB: in really_probe, ret=0
[ 1.306687] 8941_l15: 2050 mV normal idle
[ 1.310286] TRB: in really_probe, ret=0
[ 1.314383] TRB: in really_probe, ret=0
[ 1.318410] 8941_l16: 2700 mV normal idle
[ 1.322002] TRB: in really_probe, ret=0
[ 1.326100] TRB: in really_probe, ret=0
[ 1.330150] 8941_l17: 2700 mV normal idle
[ 1.333695] TRB: in really_probe, ret=0
[ 1.337819] TRB: in really_probe, ret=0
[ 1.341870] 8941_l18: 2850 mV normal idle
[ 1.345415] TRB: in really_probe, ret=0
[ 1.349539] TRB: in really_probe, ret=0
[ 1.353590] 8941_l19: 3300 mV normal idle
[ 1.357134] TRB: in really_probe, ret=0
[ 1.361276] TRB: in really_probe, ret=0
[ 1.365283] 8941_l20: 2950 mV normal idle
[ 1.368852] TRB: in really_probe, ret=0
[ 1.372996] TRB: in really_probe, ret=0
[ 1.377007] 8941_l21: 2950 mV normal idle
[ 1.380600] TRB: in really_probe, ret=0
[ 1.384694] TRB: in really_probe, ret=0
[ 1.388724] 8941_l22: 3000 mV normal idle
[ 1.392312] TRB: in really_probe, ret=0
[ 1.396413] TRB: in really_probe, ret=0
[ 1.400467] 8941_l23: 2800 mV normal idle
[ 1.404014] TRB: in really_probe, ret=0
[ 1.408132] TRB: in really_probe, ret=0
[ 1.412188] 8941_l24: 3075 mV normal idle
[ 1.415728] TRB: in really_probe, ret=0
[ 1.419850] TRB: in really_probe, ret=0
[ 1.423897] 8941_lvs1: no parameters
[ 1.427436] TRB: in really_probe, ret=0
[ 1.431242] TRB: in really_probe, ret=0
[ 1.435067] 8941_lvs2: no parameters
[ 1.438634] TRB: in really_probe, ret=0
[ 1.442439] TRB: in really_probe, ret=0
[ 1.446267] 8941_lvs3: no parameters
[ 1.449843] TRB: in really_probe, ret=0
[ 1.453640] TRB: in really_probe, ret=0
[ 1.457178] msm_rpm_dev_probe(): RPM probe completed successfully
[ 1.461009] TRB: in really_probe, ret=0
[ 1.467843] /home/CORPUSERS/10102229/work/dragonboard/APQ8074_M8974AAAAANLYA31050138_JB_V11/kernel-14-test-usb/drivers/rtc/hcto
sys.c: unable to open rtc device (rtc0)
[ 1.471215] ALSA device list:
[ 1.485853] No soundcards found.
[ 1.489327] Freeing unused kernel memory: 284K (c0886000 - c08cd000)
mkdir: can't create directory '/dev': File exists
sh: can't access tty; job control turned off
/ # cd lib
/lib # cd modules
/lib/modules # ls
ansi_cprng.ko libcomposite.ko udc-core.ko
ci_hdrc.ko loadem.sh usb_f_ecm.ko
ci_hdrc_imx.ko phy-msm-usb.ko usb_f_ecm_subset.ko
ci_hdrc_msm.ko u_ether.ko usb_f_rndis.ko
g_ether.ko u_rndis.ko usbmisc_imx.ko
/lib/modules # cat loadem.sh
#!/bin/sh
#insmod usb_common.ko
insmod phy-msm-usb.ko
insmod udc-core.ko
insmod ci_hdrc.ko
insmod ci_hdrc_msm.ko
insmod libcomposite.ko
insmod u_ether.ko
insmod u_rndis.ko
insmod usb_f_rndis.ko
insmod usb_f_ecm.ko
insmod usb_f_subset.ko
insmod ansi_cprng.ko
insmod g_ether.ko
/lib/modules # ./loadem.sh
[ 22.390454] ------------[ cut here ]------------
[ 22.390494] WARNING: CPU: 0 PID: 88 at
/home/CORPUSERS/10102229/work/dragonboard/APQ8074_M8974AAAAANLYA31050138_JB_V11/kernel-1
4-test-usb/drivers/usb/phy/phy-msm-usb.c:1581 msm_otg_probe+0x24/0x904
[phy_msm_usb]()
[ 22.394146] TRB: in msm_otg_probe
[ 22.426106] Modules linked in: phy_msm_usb(+)
[ 22.429337] CPU: 0 PID: 88 Comm: insmod Not tainted
3.13.0-rc6-00147-g00bb56a-dirty #40
[ 22.429629] [<c0214144>] (unwind_backtrace+0x0/0xf8) from
[<c0211ba8>] (show_stack+0x10/0x14)
[ 22.437471] [<c0211ba8>] (show_stack+0x10/0x14) from [<c0674bec>]
(dump_stack+0x64/0xb4)
[ 22.446132] [<c0674bec>] (dump_stack+0x64/0xb4) from [<c022afd8>]
(warn_slowpath_common+0x68/0x88)
[ 22.454287] [<c022afd8>] (warn_slowpath_common+0x68/0x88) from
[<c022b08c>] (warn_slowpath_fmt+0x30/0x40)
[ 22.463060] [<c022b08c>] (warn_slowpath_fmt+0x30/0x40) from
[<bf005024>] (msm_otg_probe+0x24/0x904 [phy_msm_usb])
[ 22.472703] [<bf005024>] (msm_otg_probe+0x24/0x904 [phy_msm_usb])
from [<c04e2968>] (platform_drv_probe+0x18/0x48)
[ 22.482936] [<c04e2968>] (platform_drv_probe+0x18/0x48) from
[<c04e10b4>] (driver_probe_device+0x18c/0x23c)
[ 22.493176] [<c04e10b4>] (driver_probe_device+0x18c/0x23c) from
[<c04e11f0>] (__driver_attach+0x8c/0x90)
[ 22.502812] [<c04e11f0>] (__driver_attach+0x8c/0x90) from
[<c04df910>] (bus_for_each_dev+0x60/0x94)
[ 22.512531] [<c04df910>] (bus_for_each_dev+0x60/0x94) from
[<c04e0800>] (bus_add_driver+0xdc/0x1d0)
[ 22.521300] [<c04e0800>] (bus_add_driver+0xdc/0x1d0) from
[<c04e180c>] (driver_register+0x78/0xf4)
[ 22.530328] [<c04e180c>] (driver_register+0x78/0xf4) from
[<c0208860>] (do_one_initcall+0x110/0x174)
[ 22.539340] [<c0208860>] (do_one_initcall+0x110/0x174) from
[<c0285740>] (load_module+0x185c/0x1c6c)
[ 22.548646] [<c0285740>] (load_module+0x185c/0x1c6c) from
[<c0285c40>] (SyS_init_module+0xf0/0x100)
[ 22.557759] [<c0285c40>] (SyS_init_module+0xf0/0x100) from
[<c020e3c0>] (ret_fast_syscall+0x0/0x30)
[ 22.566534] ---[ end trace 9c437930835a2046 ]---
[ 22.575629] TRB: in msm_otg_read_dt
[ 22.580403] TRB: in msm_otg_read_dt, mode=2
[ 22.583635] msm_otg f9a55000.usb: OTG regs = f009e000
[ 22.588136] TRB: voltage initialized status=0
[ 22.593864] TRB: in msm_usb_reset
[ 22.597306] TRB: msm_otg_link_clk_reset, assert=1
[ 22.601873] TRB: msm_otg_link_clk_reset, assert=0
[ 22.605297] TRB: in msm_otg_reset
[ 22.710108] TRB: in msm_otg_probe, mode=2, otg_control=1
[ 22.710127] TRB: in really_probe, ret=0
[ 22.790271] ------------[ cut here ]------------
[ 22.790306] WARNING: CPU: 0 PID: 97 at
/home/CORPUSERS/10102229/work/dragonboard/APQ8074_M8974AAAAANLYA31050138_JB_V11/kernel-1
4-test-usb/drivers/usb/chipidea/ci_hdrc_msm.c:65
ci_hdrc_msm_probe+0x1c/0xc0 [ci_hdrc_msm]()
[ 22.793963] TRB: in ci_hdrc_msm_probe()
[ 22.819817] Modules linked in: ci_hdrc_msm(+) ci_hdrc udc_core phy_msm_usb
[ 22.825309] CPU: 0 PID: 97 Comm: insmod Tainted: G W
3.13.0-rc6-00147-g00bb56a-dirty #40
[ 22.825686] [<c0214144>] (unwind_backtrace+0x0/0xf8) from
[<c0211ba8>] (show_stack+0x10/0x14)
[ 22.834563] [<c0211ba8>] (show_stack+0x10/0x14) from [<c0674bec>]
(dump_stack+0x64/0xb4)
[ 22.843144] [<c0674bec>] (dump_stack+0x64/0xb4) from [<c022afd8>]
(warn_slowpath_common+0x68/0x88)
[ 22.851298] [<c022afd8>] (warn_slowpath_common+0x68/0x88) from
[<c022b08c>] (warn_slowpath_fmt+0x30/0x40)
[ 22.860068] [<c022b08c>] (warn_slowpath_fmt+0x30/0x40) from
[<bf01c114>] (ci_hdrc_msm_probe+0x1c/0xc0 [ci_hdrc_msm])
[ 22.869693] [<bf01c114>] (ci_hdrc_msm_probe+0x1c/0xc0
[ci_hdrc_msm]) from [<c04e2968>] (platform_drv_probe+0x18/0x48)
[ 22.880298] [<c04e2968>] (platform_drv_probe+0x18/0x48) from
[<c04e10b4>] (driver_probe_device+0x18c/0x23c)
[ 22.890796] [<c04e10b4>] (driver_probe_device+0x18c/0x23c) from
[<c04e11f0>] (__driver_attach+0x8c/0x90)
[ 22.900343] [<c04e11f0>] (__driver_attach+0x8c/0x90) from
[<c04df910>] (bus_for_each_dev+0x60/0x94)
[ 22.910064] [<c04df910>] (bus_for_each_dev+0x60/0x94) from
[<c04e0800>] (bus_add_driver+0xdc/0x1d0)
[ 22.918814] [<c04e0800>] (bus_add_driver+0xdc/0x1d0) from
[<c04e180c>] (driver_register+0x78/0xf4)
[ 22.927860] [<c04e180c>] (driver_register+0x78/0xf4) from
[<c0208860>] (do_one_initcall+0x110/0x174)
[ 22.936892] [<c0208860>] (do_one_initcall+0x110/0x174) from
[<c0285740>] (load_module+0x185c/0x1c6c)
[ 22.946178] [<c0285740>] (load_module+0x185c/0x1c6c) from
[<c0285c40>] (SyS_init_module+0xf0/0x100)
[ 22.955291] [<c0285c40>] (SyS_init_module+0xf0/0x100) from
[<c020e3c0>] (ret_fast_syscall+0x0/0x30)
[ 22.964063] ---[ end trace 9c437930835a2047 ]---
[ 22.973172] TRB: done with WARN
[ 22.977915] msm_hsusb f9a55000.gadget: ci_hdrc_msm_probe fa-la-la-la-la
[ 22.980830] TRB: in ci_get_platdata
[ 22.987375] TRB: in ci_get_platdata, dr_mode=2
[ 22.991202] TRB: in hw_alloc_regmap, is_lpg=0
[ 22.995364] TRB: ci hw_read: reg=f0192108, mask=00020000, val=00000000
[ 22.999790] TRB: in hw_alloc_regmap, is_lpg=0
[ 23.018442] TRB: ci hw_read: reg=f0192124, mask=0000001f, val=00000010
[ 23.018465] TRB: ci hw_read: reg=f0192184, mask=00800000, val=00000000
[ 23.023883] TRB: ci hw_write: reg=f0192148, mask=ffffffff, data=00000000
[ 23.030391] TRB: ci hw_write: reg=f0192144, mask=ffffffff, data=ffffffff
[ 23.037225] ci_hdrc ci_hdrc.0: ChipIdea HDRC found, lpm: 0; cap:
f0192100 op: f0192140
[ 23.043932] ------------[ cut here ]------------
[ 23.051666] WARNING: CPU: 0 PID: 97 at
/home/CORPUSERS/10102229/work/dragonboard/APQ8074_M8974AAAAANLYA31050138_JB_V11/kernel-1
4-test-usb/drivers/usb/phy/phy-msm-usb.c:461 msm_phy_init+0x1c/0x16c
[phy_msm_usb]()
[ 23.056417] TRB: in msm_phy_init
[ 23.074915] Modules linked in: ci_hdrc_msm(+) ci_hdrc udc_core phy_msm_usb
[ 23.084785] CPU: 0 PID: 97 Comm: insmod Tainted: G W
3.13.0-rc6-00147-g00bb56a-dirty #40
[ 23.085153] [<c0214144>] (unwind_backtrace+0x0/0xf8) from
[<c0211ba8>] (show_stack+0x10/0x14)
[ 23.094032] [<c0211ba8>] (show_stack+0x10/0x14) from [<c0674bec>]
(dump_stack+0x64/0xb4)
[ 23.102624] [<c0674bec>] (dump_stack+0x64/0xb4) from [<c022afd8>]
(warn_slowpath_common+0x68/0x88)
[ 23.110780] [<c022afd8>] (warn_slowpath_common+0x68/0x88) from
[<c022b08c>] (warn_slowpath_fmt+0x30/0x40)
[ 23.119527] [<c022b08c>] (warn_slowpath_fmt+0x30/0x40) from
[<bf001af4>] (msm_phy_init+0x1c/0x16c [phy_msm_usb])
[ 23.129195] [<bf001af4>] (msm_phy_init+0x1c/0x16c [phy_msm_usb])
from [<bf00f4e8>] (ci_hdrc_probe+0x218/0x7b4 [ci_hdrc])
[ 23.139438] [<bf00f4e8>] (ci_hdrc_probe+0x218/0x7b4 [ci_hdrc]) from
[<c04e2968>] (platform_drv_probe+0x18/0x48)
[ 23.150282] [<c04e2968>] (platform_drv_probe+0x18/0x48) from
[<c04e10b4>] (driver_probe_device+0x18c/0x23c)
[ 23.160089] [<c04e10b4>] (driver_probe_device+0x18c/0x23c) from
[<c04df884>] (bus_for_each_drv+0x5c/0x88)
[ 23.169785] [<c04df884>] (bus_for_each_drv+0x5c/0x88) from
[<c04e0ef4>] (device_attach+0x80/0x98)
[ 23.179532] [<c04e0ef4>] (device_attach+0x80/0x98) from
[<c04e05d8>] (bus_probe_device+0x84/0xa8)
[ 23.188386] [<c04e05d8>] (bus_probe_device+0x84/0xa8) from
[<c04debec>] (device_add+0x3a8/0x4d0)
[ 23.197241] [<c04debec>] (device_add+0x3a8/0x4d0) from [<c04e25ac>]
(platform_device_add+0x100/0x22c)
[ 23.206101] [<c04e25ac>] (platform_device_add+0x100/0x22c) from
[<bf00fdac>] (ci_hdrc_add_device+0x190/0x1dc [ci_hdrc])
[ 23.215219] [<bf00fdac>] (ci_hdrc_add_device+0x190/0x1dc [ci_hdrc])
from [<bf01c168>] (ci_hdrc_msm_probe+0x70/0xc0 [ci_hdrc_msm
])
[ 23.225806] [<bf01c168>] (ci_hdrc_msm_probe+0x70/0xc0
[ci_hdrc_msm]) from [<c04e2968>] (platform_drv_probe+0x18/0x48)
[ 23.237608] [<c04e2968>] (platform_drv_probe+0x18/0x48) from
[<c04e10b4>] (driver_probe_device+0x18c/0x23c)
[ 23.248197] [<c04e10b4>] (driver_probe_device+0x18c/0x23c) from
[<c04e11f0>] (__driver_attach+0x8c/0x90)
[ 23.257745] [<c04e11f0>] (__driver_attach+0x8c/0x90) from
[<c04df910>] (bus_for_each_dev+0x60/0x94)
[ 23.267465] [<c04df910>] (bus_for_each_dev+0x60/0x94) from
[<c04e0800>] (bus_add_driver+0xdc/0x1d0)
[ 23.276234] [<c04e0800>] (bus_add_driver+0xdc/0x1d0) from
[<c04e180c>] (driver_register+0x78/0xf4)
[ 23.285260] [<c04e180c>] (driver_register+0x78/0xf4) from
[<c0208860>] (do_one_initcall+0x110/0x174)
[ 23.294288] [<c0208860>] (do_one_initcall+0x110/0x174) from
[<c0285740>] (load_module+0x185c/0x1c6c)
[ 23.303577] [<c0285740>] (load_module+0x185c/0x1c6c) from
[<c0285c40>] (SyS_init_module+0xf0/0x100)
[ 23.312694] [<c0285c40>] (SyS_init_module+0xf0/0x100) from
[<c020e3c0>] (ret_fast_syscall+0x0/0x30)
[ 23.321464] ---[ end trace 9c437930835a2048 ]---
[ 23.330483] TRB: ulpi_init() 1
[ 23.335303] TRB: ulpi_init() 2
[ 23.338168] TRB: ulpi_init() 3
[ 23.341355] TRB: ulpi: write 0x63 to 0x81
[ 23.344246] TRB: ulpi_init() 4
[ 23.348325] TRB: ulpi_write 00000063 to reg 00000081
[ 23.351322] TRB: ulpi_init() 5
[ 23.356398] TRB: ulpi_init() 6
[ 23.359261] TRB: ulpi_init() 7 - done
[ 23.362338] TRB: did I see ulpi_init???
[ 23.366075] TRB: ulpi_write 00000004 to reg 0000000d
[ 23.369683] TRB: ulpi_write 00000004 to reg 00000010
[ 23.374914] TRB: ci hw_read: reg=f0192124, mask=00000180, val=00000180
[ 23.379843] ci_hdrc ci_hdrc.0: It is OTG capable controller
[ 23.386194] TRB: ci hw_write: reg=f01921a4, mask=7f000000, data=00000000
[ 23.391665] TRB: ci hw_write: reg=f01921a4, mask=007f0000, data=007f0000
[ 23.398594] TRB: ci hw_read: reg=f0192124, mask=00000080, val=00000080
[ 23.405352] TRB: in usb_add_gadget_udc_release()
[ 23.411626] ------------[ cut here ]------------
[ 23.416398] WARNING: CPU: 0 PID: 97 at
/home/CORPUSERS/10102229/work/dragonboard/APQ8074_M8974AAAAANLYA31050138_JB_V11/kernel-1
4-test-usb/drivers/usb/gadget/udc-core.c:206
usb_add_gadget_udc_release+0x28/0x1e0 [udc_core]()
[ 23.421020] TRB: in usb_add_gadget_udc_release()
[ 23.440531] Modules linked in: ci_hdrc_msm(+) ci_hdrc udc_core phy_msm_usb
[ 23.451712] CPU: 0 PID: 97 Comm: insmod Tainted: G W
3.13.0-rc6-00147-g00bb56a-dirty #40
[ 23.452079] [<c0214144>] (unwind_backtrace+0x0/0xf8) from
[<c0211ba8>] (show_stack+0x10/0x14)
[ 23.460951] [<c0211ba8>] (show_stack+0x10/0x14) from [<c0674bec>]
(dump_stack+0x64/0xb4)
[ 23.469522] [<c0674bec>] (dump_stack+0x64/0xb4) from [<c022afd8>]
(warn_slowpath_common+0x68/0x88)
[ 23.477702] [<c022afd8>] (warn_slowpath_common+0x68/0x88) from
[<c022b08c>] (warn_slowpath_fmt+0x30/0x40)
[ 23.486475] [<c022b08c>] (warn_slowpath_fmt+0x30/0x40) from
[<bf008744>] (usb_add_gadget_udc_release+0x28/0x1e0 [udc_core])
[ 23.496121] [<bf008744>] (usb_add_gadget_udc_release+0x28/0x1e0
[udc_core]) from [<bf012f0c>] (ci_hdrc_gadget_init+0x264/0x2d8
[ci_hdrc])
[ 23.507057] [<bf012f0c>] (ci_hdrc_gadget_init+0x264/0x2d8
[ci_hdrc]) from [<bf00f7d4>] (ci_hdrc_probe+0x504/0x7b4 [ci_hdrc])
[ 23.519552] [<bf00f7d4>] (ci_hdrc_probe+0x504/0x7b4 [ci_hdrc]) from
[<c04e2968>] (platform_drv_probe+0x18/0x48)
[ 23.530831] [<c04e2968>] (platform_drv_probe+0x18/0x48) from
[<c04e10b4>] (driver_probe_device+0x18c/0x23c)
[ 23.540639] [<c04e10b4>] (driver_probe_device+0x18c/0x23c) from
[<c04df884>] (bus_for_each_drv+0x5c/0x88)
[ 23.550360] [<c04df884>] (bus_for_each_drv+0x5c/0x88) from
[<c04e0ef4>] (device_attach+0x80/0x98)
[ 23.560080] [<c04e0ef4>] (device_attach+0x80/0x98) from
[<c04e05d8>] (bus_probe_device+0x84/0xa8)
[ 23.568914] [<c04e05d8>] (bus_probe_device+0x84/0xa8) from
[<c04debec>] (device_add+0x3a8/0x4d0)
[ 23.577789] [<c04debec>] (device_add+0x3a8/0x4d0) from [<c04e25ac>]
(platform_device_add+0x100/0x22c)
[ 23.586650] [<c04e25ac>] (platform_device_add+0x100/0x22c) from
[<bf00fdac>] (ci_hdrc_add_device+0x190/0x1dc [ci_hdrc])
[ 23.595768] [<bf00fdac>] (ci_hdrc_add_device+0x190/0x1dc [ci_hdrc])
from [<bf01c168>] (ci_hdrc_msm_probe+0x70/0xc0 [ci_hdrc_msm
])
[ 23.606356] [<bf01c168>] (ci_hdrc_msm_probe+0x70/0xc0
[ci_hdrc_msm]) from [<c04e2968>] (platform_drv_probe+0x18/0x48)
[ 23.618158] [<c04e2968>] (platform_drv_probe+0x18/0x48) from
[<c04e10b4>] (driver_probe_device+0x18c/0x23c)
[ 23.628745] [<c04e10b4>] (driver_probe_device+0x18c/0x23c) from
[<c04e11f0>] (__driver_attach+0x8c/0x90)
[ 23.638294] [<c04e11f0>] (__driver_attach+0x8c/0x90) from
[<c04df910>] (bus_for_each_dev+0x60/0x94)
[ 23.648015] [<c04df910>] (bus_for_each_dev+0x60/0x94) from
[<c04e0800>] (bus_add_driver+0xdc/0x1d0)
[ 23.656783] [<c04e0800>] (bus_add_driver+0xdc/0x1d0) from
[<c04e180c>] (driver_register+0x78/0xf4)
[ 23.665809] [<c04e180c>] (driver_register+0x78/0xf4) from
[<c0208860>] (do_one_initcall+0x110/0x174)
[ 23.674839] [<c0208860>] (do_one_initcall+0x110/0x174) from
[<c0285740>] (load_module+0x185c/0x1c6c)
[ 23.684126] [<c0285740>] (load_module+0x185c/0x1c6c) from
[<c0285c40>] (SyS_init_module+0xf0/0x100)
[ 23.693241] [<c0285c40>] (SyS_init_module+0xf0/0x100) from
[<c020e3c0>] (ret_fast_syscall+0x0/0x30)
[ 23.701998] ---[ end trace 9c437930835a2049 ]---
[ 23.711326] TRB: in msm_otg_set_peripheral
[ 23.715861] TRB: MOSP 1
[ 23.719765] TRB: MOSP 6
[ 23.734335] peripheral driver registered w/ tranceiver
[ 23.734356] TRB: msm_otg_start_peripheral, on=1
[ 23.738351] TRB: msm_otg_start_peripheral, gadget on
[ 23.742828] ------------[ cut here ]------------
[ 23.748004] WARNING: CPU: 0 PID: 97 at
/home/CORPUSERS/10102229/work/dragonboard/APQ8074_M8974AAAAANLYA31050138_JB_V11/kernel-1
4-test-usb/drivers/usb/chipidea/udc.c:1456
ci_udc_vbus_session+0x20/0x128 [ci_hdrc]()
[ 23.752782] TRB: ci_udc_vbus_session - who's calling?
[ 23.771466] Modules linked in: ci_hdrc_msm(+) ci_hdrc udc_core phy_msm_usb
[ 23.782882] CPU: 0 PID: 97 Comm: insmod Tainted: G W
3.13.0-rc6-00147-g00bb56a-dirty #40
[ 23.783250] [<c0214144>] (unwind_backtrace+0x0/0xf8) from
[<c0211ba8>] (show_stack+0x10/0x14)
[ 23.792126] [<c0211ba8>] (show_stack+0x10/0x14) from [<c0674bec>]
(dump_stack+0x64/0xb4)
[ 23.800716] [<c0674bec>] (dump_stack+0x64/0xb4) from [<c022afd8>]
(warn_slowpath_common+0x68/0x88)
[ 23.808853] [<c022afd8>] (warn_slowpath_common+0x68/0x88) from
[<c022b08c>] (warn_slowpath_fmt+0x30/0x40)
[ 23.817650] [<c022b08c>] (warn_slowpath_fmt+0x30/0x40) from
[<bf010dd4>] (ci_udc_vbus_session+0x20/0x128 [ci_hdrc])
[ 23.827286] [<bf010dd4>] (ci_udc_vbus_session+0x20/0x128 [ci_hdrc])
from [<bf000148>] (msm_otg_start_peripheral+0x6c/0xcc [phy_
msm_usb])
[ 23.837528] [<bf000148>] (msm_otg_start_peripheral+0x6c/0xcc
[phy_msm_usb]) from [<bf0004d4>] (msm_otg_set_peripheral+0xdc/0x16
4 [phy_msm_usb])
[ 23.850036] [<bf0004d4>] (msm_otg_set_peripheral+0xdc/0x164
[phy_msm_usb]) from [<bf00f808>] (ci_hdrc_probe+0x538/0x7b4 [ci_hdr
c])
[ 23.862616] [<bf00f808>] (ci_hdrc_probe+0x538/0x7b4 [ci_hdrc]) from
[<c04e2968>] (platform_drv_probe+0x18/0x48)
[ 23.874416] [<c04e2968>] (platform_drv_probe+0x18/0x48) from
[<c04e10b4>] (driver_probe_device+0x18c/0x23c)
[ 23.884395] [<c04e10b4>] (driver_probe_device+0x18c/0x23c) from
[<c04df884>] (bus_for_each_drv+0x5c/0x88)
[ 23.894117] [<c04df884>] (bus_for_each_drv+0x5c/0x88) from
[<c04e0ef4>] (device_attach+0x80/0x98)
[ 23.903839] [<c04e0ef4>] (device_attach+0x80/0x98) from
[<c04e05d8>] (bus_probe_device+0x84/0xa8)
[ 23.912691] [<c04e05d8>] (bus_probe_device+0x84/0xa8) from
[<c04debec>] (device_add+0x3a8/0x4d0)
[ 23.921548] [<c04debec>] (device_add+0x3a8/0x4d0) from [<c04e25ac>]
(platform_device_add+0x100/0x22c)
[ 23.930409] [<c04e25ac>] (platform_device_add+0x100/0x22c) from
[<bf00fdac>] (ci_hdrc_add_device+0x190/0x1dc [ci_hdrc])
[ 23.939504] [<bf00fdac>] (ci_hdrc_add_device+0x190/0x1dc [ci_hdrc])
from [<bf01c168>] (ci_hdrc_msm_probe+0x70/0xc0 [ci_hdrc_msm
])
[ 23.950116] [<bf01c168>] (ci_hdrc_msm_probe+0x70/0xc0
[ci_hdrc_msm]) from [<c04e2968>] (platform_drv_probe+0x18/0x48)
[ 23.961915] [<c04e2968>] (platform_drv_probe+0x18/0x48) from
[<c04e10b4>] (driver_probe_device+0x18c/0x23c)
[ 23.972502] [<c04e10b4>] (driver_probe_device+0x18c/0x23c) from
[<c04e11f0>] (__driver_attach+0x8c/0x90)
[ 23.982051] [<c04e11f0>] (__driver_attach+0x8c/0x90) from
[<c04df910>] (bus_for_each_dev+0x60/0x94)
[ 23.991772] [<c04df910>] (bus_for_each_dev+0x60/0x94) from
[<c04e0800>] (bus_add_driver+0xdc/0x1d0)
[ 24.000539] [<c04e0800>] (bus_add_driver+0xdc/0x1d0) from
[<c04e180c>] (driver_register+0x78/0xf4)
[ 24.009549] [<c04e180c>] (driver_register+0x78/0xf4) from
[<c0208860>] (do_one_initcall+0x110/0x174)
[ 24.018595] [<c0208860>] (do_one_initcall+0x110/0x174) from
[<c0285740>] (load_module+0x185c/0x1c6c)
[ 24.027885] [<c0285740>] (load_module+0x185c/0x1c6c) from
[<c0285c40>] (SyS_init_module+0xf0/0x100)
[ 24.037000] [<c0285c40>] (SyS_init_module+0xf0/0x100) from
[<c020e3c0>] (ret_fast_syscall+0x0/0x30)
[ 24.045756] ---[ end trace 9c437930835a204a ]---
[ 24.054776] TRB: ci_udc_vbus_session, is_active=1
[ 24.059620] TRB: ci_udc_vbus_session, gadget_ready=0
[ 24.064265] TRB: MOSP 7
[ 24.069250] TRB: MOSP 8
[ 24.071444] TRB: MOSP 9
[ 24.073860] TRB: in msm_otg_sm_work: state=0
[ 24.076284] TRB: MOSW 1 OTG_STATE_UNDEFINED state
[ 24.080915] TRB: ci hw_read: reg=f01921a4, mask=ffffffff, val=00201000
[ 24.085403] ------------[ cut here ]------------
[ 24.091860] TRB: in msm_otg_reset
[ 24.096602] TRB: msm_otg_init_sm, mode=2
[ 24.099809] TRB: MOSW 2 OTG_STATE_B_IDLE state
[ 24.103841] WARNING: CPU: 0 PID: 97 at
/home/CORPUSERS/10102229/work/dragonboard/APQ8074_M8974AAAAANLYA31050138_JB_V11/kernel-1
4-test-usb/drivers/usb/chipidea/udc.c:1456
ci_udc_vbus_session+0x20/0x128 [ci_hdrc]()
[ 24.108076] TRB: ci_udc_vbus_session - who's calling?
[ 24.127117] Modules linked in: ci_hdrc_msm(+) ci_hdrc udc_core phy_msm_usb
[ 24.138524] CPU: 0 PID: 97 Comm: insmod Tainted: G W
3.13.0-rc6-00147-g00bb56a-dirty #40
[ 24.138891] [<c0214144>] (unwind_backtrace+0x0/0xf8) from
[<c0211ba8>] (show_stack+0x10/0x14)
[ 24.147765] [<c0211ba8>] (show_stack+0x10/0x14) from [<c0674bec>]
(dump_stack+0x64/0xb4)
[ 24.156356] [<c0674bec>] (dump_stack+0x64/0xb4) from [<c022afd8>]
(warn_slowpath_common+0x68/0x88)
[ 24.164516] [<c022afd8>] (warn_slowpath_common+0x68/0x88) from
[<c022b08c>] (warn_slowpath_fmt+0x30/0x40)
[ 24.173290] [<c022b08c>] (warn_slowpath_fmt+0x30/0x40) from
[<bf010dd4>] (ci_udc_vbus_session+0x20/0x128 [ci_hdrc])
[ 24.182930] [<bf010dd4>] (ci_udc_vbus_session+0x20/0x128 [ci_hdrc])
from [<bf0102ac>] (ci_handle_vbus_change+0x74/0x7c [ci_hdrc
])
[ 24.193171] [<bf0102ac>] (ci_handle_vbus_change+0x74/0x7c
[ci_hdrc]) from [<bf00f674>] (ci_hdrc_probe+0x3a4/0x7b4 [ci_hdrc])
[ 24.204976] [<bf00f674>] (ci_hdrc_probe+0x3a4/0x7b4 [ci_hdrc]) from
[<c04e2968>] (platform_drv_probe+0x18/0x48)
[ 24.216256] [<c04e2968>] (platform_drv_probe+0x18/0x48) from
[<c04e10b4>] (driver_probe_device+0x18c/0x23c)
[ 24.226062] [<c04e10b4>] (driver_probe_device+0x18c/0x23c) from
[<c04df884>] (bus_for_each_drv+0x5c/0x88)
[ 24.235783] [<c04df884>] (bus_for_each_drv+0x5c/0x88) from
[<c04e0ef4>] (device_attach+0x80/0x98)
[ 24.245505] [<c04e0ef4>] (device_attach+0x80/0x98) from
[<c04e05d8>] (bus_probe_device+0x84/0xa8)
[ 24.254359] [<c04e05d8>] (bus_probe_device+0x84/0xa8) from
[<c04debec>] (device_add+0x3a8/0x4d0)
[ 24.263214] [<c04debec>] (device_add+0x3a8/0x4d0) from [<c04e25ac>]
(platform_device_add+0x100/0x22c)
[ 24.272074] [<c04e25ac>] (platform_device_add+0x100/0x22c) from
[<bf00fdac>] (ci_hdrc_add_device+0x190/0x1dc [ci_hdrc])
[ 24.281192] [<bf00fdac>] (ci_hdrc_add_device+0x190/0x1dc [ci_hdrc])
from [<bf01c168>] (ci_hdrc_msm_probe+0x70/0xc0 [ci_hdrc_msm
])
[ 24.291780] [<bf01c168>] (ci_hdrc_msm_probe+0x70/0xc0
[ci_hdrc_msm]) from [<c04e2968>] (platform_drv_probe+0x18/0x48)
[ 24.303583] [<c04e2968>] (platform_drv_probe+0x18/0x48) from
[<c04e10b4>] (driver_probe_device+0x18c/0x23c)
[ 24.314171] [<c04e10b4>] (driver_probe_device+0x18c/0x23c) from
[<c04e11f0>] (__driver_attach+0x8c/0x90)
[ 24.323717] [<c04e11f0>] (__driver_attach+0x8c/0x90) from
[<c04df910>] (bus_for_each_dev+0x60/0x94)
[ 24.333438] [<c04df910>] (bus_for_each_dev+0x60/0x94) from
[<c04e0800>] (bus_add_driver+0xdc/0x1d0)
[ 24.342208] [<c04e0800>] (bus_add_driver+0xdc/0x1d0) from
[<c04e180c>] (driver_register+0x78/0xf4)
[ 24.351235] [<c04e180c>] (driver_register+0x78/0xf4) from
[<c0208860>] (do_one_initcall+0x110/0x174)
[ 24.360263] [<c0208860>] (do_one_initcall+0x110/0x174) from
[<c0285740>] (load_module+0x185c/0x1c6c)
[ 24.369530] [<c0285740>] (load_module+0x185c/0x1c6c) from
[<c0285c40>] (SyS_init_module+0xf0/0x100)
[ 24.378665] [<c0285c40>] (SyS_init_module+0xf0/0x100) from
[<c020e3c0>] (ret_fast_syscall+0x0/0x30)
[ 24.387422] ---[ end trace 9c437930835a204b ]---
[ 24.396442] TRB: ci_udc_vbus_session, is_active=0
[ 24.401303] TRB: ci_udc_vbus_session, gadget_ready=0
[ 24.405888] TRB: ci hw_write: reg=f01921a4, mask=007f0000, data=00080000
[ 24.410942] TRB: ci hw_write: reg=f01921a4, mask=08000000, data=08000000
[ 24.417623] TRB: Creating device files for ci_hdrc.0
[ 24.424361] TRB: in really_probe, ret=0
[ 24.429264] TRB: in really_probe, ret=0
insmod: can't read 'usb_f_subset.ko': No such file or directory
[ 24.547285] TRB: usb_gadget_probe_driver
[ 24.547308] ------------[ cut here ]------------
[ 24.560166] WARNING: CPU: 0 PID: 117 at
/home/CORPUSERS/10102229/work/dragonboard/APQ8074_M8974AAAAANLYA31050138_JB_V11/kernel-
14-test-usb/drivers/usb/gadget/udc-core.c:416
usb_gadget_probe_driver+0x20/0x100 [udc_core]()
[ 24.560206] TRB: usb_gadget_probe_driver
[ 24.584972] Modules linked in: g_ether(+) ansi_cprng usb_f_ecm
usb_f_rndis u_rndis u_ether libcomposite ci_hdrc_msm ci_hdrc udc
_core phy_msm_usb
[ 24.596540] CPU: 0 PID: 117 Comm: insmod Tainted: G W
3.13.0-rc6-00147-g00bb56a-dirty #40
[ 24.596917] [<c0214144>] (unwind_backtrace+0x0/0xf8) from
[<c0211ba8>] (show_stack+0x10/0x14)
[ 24.605804] [<c0211ba8>] (show_stack+0x10/0x14) from [<c0674bec>]
(dump_stack+0x64/0xb4)
[ 24.614462] [<c0674bec>] (dump_stack+0x64/0xb4) from [<c022afd8>]
(warn_slowpath_common+0x68/0x88)
[ 24.622615] [<c022afd8>] (warn_slowpath_common+0x68/0x88) from
[<c022b08c>] (warn_slowpath_fmt+0x30/0x40)
[ 24.631389] [<c022b08c>] (warn_slowpath_fmt+0x30/0x40) from
[<bf008bec>] (usb_gadget_probe_driver+0x20/0x100 [udc_core])
[ 24.641027] [<bf008bec>] (usb_gadget_probe_driver+0x20/0x100
[udc_core]) from [<c0208860>] (do_one_initcall+0x110/0x174)
[ 24.651962] [<c0208860>] (do_one_initcall+0x110/0x174) from
[<c0285740>] (load_module+0x185c/0x1c6c)
[ 24.662807] [<c0285740>] (load_module+0x185c/0x1c6c) from
[<c0285c40>] (SyS_init_module+0xf0/0x100)
[ 24.671922] [<c0285c40>] (SyS_init_module+0xf0/0x100) from
[<c020e3c0>] (ret_fast_syscall+0x0/0x30)
[ 24.680691] ---[ end trace 9c437930835a204c ]---
[ 24.689682] TRB: in udc_bind_to_driver
[ 24.694645] udc ci_hdrc.0: registering UDC driver [g_ether]
[ 24.698103] TRB: UBTO 1
[ 24.703643] using random self ethernet address
[ 24.706008] using random host ethernet address
[ 24.730244] usb0: HOST MAC 0e:02:1b:fe:4d:1d
[ 24.730296] usb0: MAC 2e:f3:d5:6d:9f:9c
[ 24.733598] using random self ethernet address
[ 24.737133] using random host ethernet address
[ 24.757815] g_ether gadget: adding config #2 'RNDIS'/bf0533d8
[ 24.757839] rndis_register: configNr = 0
[ 24.762561] g_ether gadget: adding 'rndis'/ef3e16c0 to config
'RNDIS'/bf0533d8
[ 24.766536] rndis_set_param_medium: 0 0
[ 24.773581] g_ether gadget: RNDIS: dual speed IN/ep1in OUT/ep1out
NOTIFY/ep2in
[ 24.777290] g_ether gadget: cfg 2/bf0533d8 speeds: high full
[ 24.784606] g_ether gadget: interface 0 = rndis/ef3e16c0
[ 24.790434] g_ether gadget: interface 1 = rndis/ef3e16c0
[ 24.795691] g_ether gadget: adding config #1 'CDC Ethernet (ECM)'/bf05332c
[ 24.801203] g_ether gadget: adding 'cdc_ethernet'/ef3e1780 to
config 'CDC Ethernet (ECM)'/bf05332c
[ 24.808027] g_ether gadget: CDC Ethernet: dual speed IN/ep1in
OUT/ep1out NOTIFY/ep2in
[ 24.817376] g_ether gadget: cfg 1/bf05332c speeds: high full
[ 24.824898] g_ether gadget: interface 0 = cdc_ethernet/ef3e1780
[ 24.830626] g_ether gadget: interface 1 = cdc_ethernet/ef3e1780
[ 24.836580] g_ether gadget: Ethernet Gadget, version: Memorial Day 2008
[ 24.842672] g_ether gadget: g_ether ready
[ 24.849071] TRB: UBTO 2
[ 24.853251] TRB: UBTO 3 - calling usb_gadget_udc_start
[ 24.855494] TRB: calling through gadget->ops->udc_start()
[ 24.860721] TRB: ci_udc_start()
[ 24.866169] TRB: CIS 1
[ 24.869119] TRB: CIS 2
[ 24.871566] TRB: CIS 3
[ 24.873893] TRB: CIS 4
[ 24.876236] TRB: CIS 5
[ 24.878580] TRB: CIS 6
[ 24.880942] TRB: UBTO 4
[ 24.883268] TRB: UBTO 5
[ 24.885611] TRB: UBTO 6
[ 24.888222] TRB: UBTO 7
/lib/modules #
On Tue, Feb 18, 2014 at 5:21 AM, Ivan T. Ivanov <[email protected]> wrote:
> From: "Ivan T. Ivanov" <[email protected]>
>
> Hi,
>
> This series intend to fix driver, which was broken for a while.
> It is used to create peripheral role device, which in coordination
> with phy-usb-msm driver will provide USB2.0 gadget support for
> Qualcomm targets.
>
> Changes since initial version.
>
> - Address comments from Peter - better description of the changes.
> - Drop patch 4 - till USB PHY driver is ready
>
> Ivan T. Ivanov (3):
> usb: chipidea: msm: Add device tree binding information
> usb: chipidea: msm: Add device tree support
> usb: chipidea: msm: Initialize offset of the capability registers
>
> .../devicetree/bindings/usb/msm-hsusb.txt | 17 ++++++++++++++
> drivers/usb/chipidea/ci_hdrc_msm.c | 24 +++++++++++++++++++-
> 2 files changed, 40 insertions(+), 1 deletion(-)
>
> --
> 1.7.9.5
>
> --
> To unsubscribe from this list: send the line "unsubscribe linux-arm-msm" in
> the body of a message to [email protected]
> More majordomo info at http://vger.kernel.org/majordomo-info.html
--
-- Tim Bird
Senior Software Engineer, Sony Mobile
Architecture Group Chair, CE Workgroup, Linux Foundation
Hi,
I will need some time to recreate USB test
environment. I will come back when I am ready.
Regards,
Ivan
Hi Tim,
On Tue, 2014-02-18 at 22:21 -0800, Tim Bird wrote:
> Ivan,
>
> I'm having tremendous problems getting this driver to initialize. For
> some reason, I can't get the driver to actually transition the
> hardware into peripheral mode. At first I was getting a lot of probe
> deferrals, based on not finding the regulators early enough in the
> boot, and I thought it was an issue with the gadget drivers loading
> before the driver could complete its setup. However, I switched
> everything to loading via modules, and now have less probe deferrals,
> but I still can't get the driver to activate.
My understanding for gadget drivers is that you can have only one
of them active in particular time. When compiled in kernel you can
chose only one of them, also you can have only one module (function)
loaded.
> I see zero interrupts.
Right, I think that we will not see interrupts until we have
SPMI drivers which could control PMIC chip, PMIC is responsible
to do ID line detection and generate IRQ to APQ/MSM chip.
> In particular the routine hw_device_state (which turns on interrupts
> in the controller) is never called, because I can't get
> msm_otg_start_peripheral to actually kick the hardware.
>
OTG state machine is not used at all. This phy-"otg" driver is
working only in "peripheral" mode, because of missing PMIC
communication.
The only callback which you could see to be executed is
struct usb_otg::set_peripheral(), when you load gadget driver.
<snip>
(Would you mind sharing your config?).
Sure. Attached.
> I tried configuring the qcom,otg-control for user controlled mode
> setting (via debugfs),
Never testes this. It was there before.
>
> My kernel is based on an internal Sony 3.13-rc6 kernel with clock and
> regulator patches applied, as well as your phy-msm-usb.c patches from
> November and your chipidea patches from yesterday.
You will need also 4th chipidea patch[1]. I have dropped it, because
I will like to upstream PHY driver changes first. They are depended
anyway.
To reduce dependency to other drivers, I could recommend you to
use Zero gadget driver. It should be enough to test USB stack,
where APQ device will be peripheral and development workstation
will be a host[2].
# cat zero.sh
#!/bin/sh
cd /lib/modules/$(uname -r)/kernel/drivers/usb/gadget
insmod ./libcomposite.ko
insmod ./usb_f_ss_lb.ko
insmod ./g_zero.ko
> [ 22.454287] [<c022afd8>] (warn_slowpath_common+0x68/0x88) from
> [<c022b08c>] (warn_slowpath_fmt+0x30/0x40)
> [ 22.463060] [<c022b08c>] (warn_slowpath_fmt+0x30/0x40) from
> [<bf005024>] (msm_otg_probe+0x24/0x904 [phy_msm_usb])
> [ 22.472703] [<bf005024>] (msm_otg_probe+0x24/0x904 [phy_msm_usb])
This is know non-fatal issue. I will try to see how to fix it.
Regards,
Ivan
[1] usb: chipidea: msm: Use USB PHY API to control PHY state
[2] http://www.linux-usb.org/usbtest/
Hi,
On Tue, 2014-02-18 at 13:26 -0800, Courtney Cavin wrote:
> On Tue, Feb 18, 2014 at 02:21:19PM +0100, Ivan T. Ivanov wrote:
> > From: "Ivan T. Ivanov" <[email protected]>
> >
> > Document device tree binding information as required by
> > the Qualcomm USB controller.
> >
> > Signed-off-by: Ivan T. Ivanov <[email protected]>
> > ---
> > .../devicetree/bindings/usb/msm-hsusb.txt | 17 +++++++++++++++++
>
> Although you mentioned to Josh that this is intended for "non-standard"
> Chipidea properties, I don't see any other than requiring that 'dr_mode'
> must be "peripheral". It would seem that this should all be integrated
> into a ci3xxx.txt.
Hm, there is no ci3xxx.txt. The closest match is ci-hdrc-imx.txt.
So it could be ci-hdrc-qcom.txt or my preferred name qcom,ci-hdrc.txt?
> > +CI13xxx (Chipidea) USB controllers
> > +
> > +Required properties:
> > +- compatible: should contain "qcom,ci-hdrc"
>
> Is there nothing more specific you could put here? Maybe a hardware
> revision, or something?
>
I am not aware of any version numbers here, sorry.
> > +- reg: offset and length of the register set in the memory map
> > +- interrupts: interrupt-specifier for the controller interrupt.
> > +- usb-phy: phandle for the PHY device
> > +- dr_mode: Sould be "peripheral"
>
> s/Sould/should/
Thanks,
Ivan
>
> -Courtney
Hi,
On Tue, 2014-02-18 at 21:31 +0300, Sergei Shtylyov wrote:
> On 02/18/2014 08:14 PM, Ivan T. Ivanov wrote:
>
> >>> From: "Ivan T. Ivanov" <[email protected]>
>
> >>> Allows controller to be specified via device tree.
> >>> Pass PHY phandle specified in DT to core driver.
>
> >>> Signed-off-by: Ivan T. Ivanov <[email protected]>
> >>> ---
> >>> drivers/usb/chipidea/ci_hdrc_msm.c | 23 ++++++++++++++++++++++-
> >>> 1 file changed, 22 insertions(+), 1 deletion(-)
>
> >> You also need to describe the binding you're creating in
> >> Documentation/devicetree/bindings/usb/<file>.txt.
>
> > Did you check "[PATCH v2 1/3]"?
>
> Did you send it to 'linux-usb'?
Opps, sorry. get_maintainer.pl did not list linux-usb and I forgot
to add it. Would like to resend it?
Regards,
Ivan
>
> WBR, Sergei
On Wed, Feb 19, 2014 at 04:43:22PM +0100, Ivan T. Ivanov wrote:
>
> Hi,
>
> On Tue, 2014-02-18 at 13:26 -0800, Courtney Cavin wrote:
> > On Tue, Feb 18, 2014 at 02:21:19PM +0100, Ivan T. Ivanov wrote:
> > > From: "Ivan T. Ivanov" <[email protected]>
> > >
> > > Document device tree binding information as required by
> > > the Qualcomm USB controller.
> > >
> > > Signed-off-by: Ivan T. Ivanov <[email protected]>
> > > ---
> > > .../devicetree/bindings/usb/msm-hsusb.txt | 17 +++++++++++++++++
> >
> > Although you mentioned to Josh that this is intended for "non-standard"
> > Chipidea properties, I don't see any other than requiring that 'dr_mode'
> > must be "peripheral". It would seem that this should all be integrated
> > into a ci3xxx.txt.
>
> Hm, there is no ci3xxx.txt. The closest match is ci-hdrc-imx.txt.
> So it could be ci-hdrc-qcom.txt or my preferred name qcom,ci-hdrc.txt?
Sorry, I was referring to ci13xxx-imx.txt, which was apparently moved to
ci-hdrc-imx.txt. I was recommending to merge the two into one
'ci13xxx.txt', as this binding seems to be a new compatible for the same
basic chip. Now perhaps 'ci-hdrc.txt'.
Although I agree with Josh that this name should be changed, and I think
either of your two suggestions would be acceptable, I would like to at
least discuss the possibility of actually merging the two in this
series.
Comments?
-Courtney
Hello.
On 02/19/2014 06:48 PM, Ivan T. Ivanov wrote:
>>>>> From: "Ivan T. Ivanov" <[email protected]>
>>>>> Allows controller to be specified via device tree.
>>>>> Pass PHY phandle specified in DT to core driver.
>>>>> Signed-off-by: Ivan T. Ivanov <[email protected]>
>>>>> ---
>>>>> drivers/usb/chipidea/ci_hdrc_msm.c | 23 ++++++++++++++++++++++-
>>>>> 1 file changed, 22 insertions(+), 1 deletion(-)
>>>> You also need to describe the binding you're creating in
>>>> Documentation/devicetree/bindings/usb/<file>.txt.
>>> Did you check "[PATCH v2 1/3]"?
>> Did you send it to 'linux-usb'?
> Opps, sorry. get_maintainer.pl did not list linux-usb and I forgot
> to add it. Would like to resend it?
I guess so, since the binding document would go in thru the USB tree
anyway, IIUC.
> Regards,
> Ivan
WBR, Sergei
Thanks very much. I will try out the things you mention and let you
know if I make progress.
-- Tim
On Wed, Feb 19, 2014 at 6:58 AM, Ivan T. Ivanov <[email protected]> wrote:
>
> Hi Tim,
>
> On Tue, 2014-02-18 at 22:21 -0800, Tim Bird wrote:
>> Ivan,
>>
>> I'm having tremendous problems getting this driver to initialize. For
>> some reason, I can't get the driver to actually transition the
>> hardware into peripheral mode. At first I was getting a lot of probe
>> deferrals, based on not finding the regulators early enough in the
>> boot, and I thought it was an issue with the gadget drivers loading
>> before the driver could complete its setup. However, I switched
>> everything to loading via modules, and now have less probe deferrals,
>> but I still can't get the driver to activate.
>
> My understanding for gadget drivers is that you can have only one
> of them active in particular time. When compiled in kernel you can
> chose only one of them, also you can have only one module (function)
> loaded.
>
>
>> I see zero interrupts.
>
> Right, I think that we will not see interrupts until we have
> SPMI drivers which could control PMIC chip, PMIC is responsible
> to do ID line detection and generate IRQ to APQ/MSM chip.
>
>> In particular the routine hw_device_state (which turns on interrupts
>> in the controller) is never called, because I can't get
>> msm_otg_start_peripheral to actually kick the hardware.
>>
>
> OTG state machine is not used at all. This phy-"otg" driver is
> working only in "peripheral" mode, because of missing PMIC
> communication.
>
> The only callback which you could see to be executed is
> struct usb_otg::set_peripheral(), when you load gadget driver.
>
>
> <snip>
>
> (Would you mind sharing your config?).
>
> Sure. Attached.
>
>
>> I tried configuring the qcom,otg-control for user controlled mode
>> setting (via debugfs),
>
> Never testes this. It was there before.
>
>>
>> My kernel is based on an internal Sony 3.13-rc6 kernel with clock and
>> regulator patches applied, as well as your phy-msm-usb.c patches from
>> November and your chipidea patches from yesterday.
>
> You will need also 4th chipidea patch[1]. I have dropped it, because
> I will like to upstream PHY driver changes first. They are depended
> anyway.
>
> To reduce dependency to other drivers, I could recommend you to
> use Zero gadget driver. It should be enough to test USB stack,
> where APQ device will be peripheral and development workstation
> will be a host[2].
>
>
> # cat zero.sh
> #!/bin/sh
> cd /lib/modules/$(uname -r)/kernel/drivers/usb/gadget
> insmod ./libcomposite.ko
> insmod ./usb_f_ss_lb.ko
> insmod ./g_zero.ko
>
>
>> [ 22.454287] [<c022afd8>] (warn_slowpath_common+0x68/0x88) from
>> [<c022b08c>] (warn_slowpath_fmt+0x30/0x40)
>> [ 22.463060] [<c022b08c>] (warn_slowpath_fmt+0x30/0x40) from
>> [<bf005024>] (msm_otg_probe+0x24/0x904 [phy_msm_usb])
>> [ 22.472703] [<bf005024>] (msm_otg_probe+0x24/0x904 [phy_msm_usb])
>
> This is know non-fatal issue. I will try to see how to fix it.
>
>
> Regards,
> Ivan
>
> [1] usb: chipidea: msm: Use USB PHY API to control PHY state
> [2] http://www.linux-usb.org/usbtest/
>
>
--
-- Tim Bird
Senior Software Engineer, Sony Mobile
Architecture Group Chair, CE Workgroup, Linux Foundation
From: "Ivan T. Ivanov" <[email protected]>
Document device tree binding information as required by
the Qualcomm USB controller.
Signed-off-by: Ivan T. Ivanov <[email protected]>
---
.../devicetree/bindings/usb/msm-hsusb.txt | 17 +++++++++++++++++
1 file changed, 17 insertions(+)
diff --git a/Documentation/devicetree/bindings/usb/msm-hsusb.txt b/Documentation/devicetree/bindings/usb/msm-hsusb.txt
index 5ea26c6..d4e7e41 100644
--- a/Documentation/devicetree/bindings/usb/msm-hsusb.txt
+++ b/Documentation/devicetree/bindings/usb/msm-hsusb.txt
@@ -15,3 +15,20 @@ Example EHCI controller device node:
usb-phy = <&usb_otg>;
};
+CI13xxx (Chipidea) USB controllers
+
+Required properties:
+- compatible: should contain "qcom,ci-hdrc"
+- reg: offset and length of the register set in the memory map
+- interrupts: interrupt-specifier for the controller interrupt.
+- usb-phy: phandle for the PHY device
+- dr_mode: Sould be "peripheral"
+
+ gadget@f9a55000 {
+ compatible = "qcom,ci-hdrc";
+ reg = <0xf9a55000 0x400>;
+ dr_mode = "peripheral";
+ interrupts = <0 134 0>;
+ usb-phy = <&usb_otg>;
+ };
+
--
1.7.9.5
> +CI13xxx (Chipidea) USB controllers
> +
> +Required properties:
> +- compatible: should contain "qcom,ci-hdrc"
> +- reg: offset and length of the register set in the memory map
> +- interrupts: interrupt-specifier for the controller interrupt.
> +- usb-phy: phandle for the PHY device
> +- dr_mode: Sould be "peripheral"
> +
> + gadget@f9a55000 {
> + compatible = "qcom,ci-hdrc";
> + reg = <0xf9a55000 0x400>;
> + dr_mode = "peripheral";
> + interrupts = <0 134 0>;
> + usb-phy = <&usb_otg>;
> + };
> +
usb_otg is not a good name for the node of usb phy.
Peter
On Mon, 2014-02-24 at 08:15 +0000, Peter Chen wrote:
> > +CI13xxx (Chipidea) USB controllers
> > +
> > +Required properties:
> > +- compatible: should contain "qcom,ci-hdrc"
> > +- reg: offset and length of the register set in the memory map
> > +- interrupts: interrupt-specifier for the controller interrupt.
> > +- usb-phy: phandle for the PHY device
> > +- dr_mode: Sould be "peripheral"
> > +
> > + gadget@f9a55000 {
> > + compatible = "qcom,ci-hdrc";
> > + reg = <0xf9a55000 0x400>;
> > + dr_mode = "peripheral";
> > + interrupts = <0 134 0>;
> > + usb-phy = <&usb_otg>;
> > + };
> > +
>
> usb_otg is not a good name for the node of usb phy.
Well, this is just an example. Is this better <&phy0>?
Regards,
Ivan
>
> Peter
>
Hi,
On Wed, 2014-02-19 at 09:46 -0800, Courtney Cavin wrote:
> On Wed, Feb 19, 2014 at 04:43:22PM +0100, Ivan T. Ivanov wrote:
> >
> > Hi,
> >
> > On Tue, 2014-02-18 at 13:26 -0800, Courtney Cavin wrote:
> > > On Tue, Feb 18, 2014 at 02:21:19PM +0100, Ivan T. Ivanov wrote:
> > > > From: "Ivan T. Ivanov" <[email protected]>
> > > >
> > > > Document device tree binding information as required by
> > > > the Qualcomm USB controller.
> > > >
> > > > Signed-off-by: Ivan T. Ivanov <[email protected]>
> > > > ---
> > > > .../devicetree/bindings/usb/msm-hsusb.txt | 17 +++++++++++++++++
> > >
> > > Although you mentioned to Josh that this is intended for "non-standard"
> > > Chipidea properties, I don't see any other than requiring that 'dr_mode'
> > > must be "peripheral". It would seem that this should all be integrated
> > > into a ci3xxx.txt.
> >
> > Hm, there is no ci3xxx.txt. The closest match is ci-hdrc-imx.txt.
> > So it could be ci-hdrc-qcom.txt or my preferred name qcom,ci-hdrc.txt?
>
> Sorry, I was referring to ci13xxx-imx.txt, which was apparently moved to
> ci-hdrc-imx.txt. I was recommending to merge the two into one
> 'ci13xxx.txt', as this binding seems to be a new compatible for the same
> basic chip. Now perhaps 'ci-hdrc.txt'.
>
> Although I agree with Josh that this name should be changed, and I think
> either of your two suggestions would be acceptable, I would like to at
> least discuss the possibility of actually merging the two in this
> series.
>
> Comments?
iMX version have required and recommender properties which are not
meaningful for QCOM variant. I will prefer separate file. It depends
on Freescale engineers (now in Cc:)
Regards,
Ivan
>
> -Courtney
>
> On Mon, 2014-02-24 at 08:15 +0000, Peter Chen wrote:
> > > +CI13xxx (Chipidea) USB controllers
> > > +
> > > +Required properties:
> > > +- compatible: should contain "qcom,ci-hdrc"
> > > +- reg: offset and length of the register set in the memory
> map
> > > +- interrupts: interrupt-specifier for the controller interrupt.
> > > +- usb-phy: phandle for the PHY device
> > > +- dr_mode: Sould be "peripheral"
> > > +
> > > + gadget@f9a55000 {
> > > + compatible = "qcom,ci-hdrc";
> > > + reg = <0xf9a55000 0x400>;
> > > + dr_mode = "peripheral";
> > > + interrupts = <0 134 0>;
> > > + usb-phy = <&usb_otg>;
> > > + };
> > > +
> >
> > usb_otg is not a good name for the node of usb phy.
>
> Well, this is just an example. Is this better <&phy0>?
>
<&usbphy0> is better since we have ethernet, sata, pcie phy.
Peter
>
> Hi,
>
> On Wed, 2014-02-19 at 09:46 -0800, Courtney Cavin wrote:
> > On Wed, Feb 19, 2014 at 04:43:22PM +0100, Ivan T. Ivanov wrote:
> > >
> > > Hi,
> > >
> > > On Tue, 2014-02-18 at 13:26 -0800, Courtney Cavin wrote:
> > > > On Tue, Feb 18, 2014 at 02:21:19PM +0100, Ivan T. Ivanov wrote:
> > > > > From: "Ivan T. Ivanov" <[email protected]>
> > > > >
> > > > > Document device tree binding information as required by the
> > > > > Qualcomm USB controller.
> > > > >
> > > > > Signed-off-by: Ivan T. Ivanov <[email protected]>
> > > > > ---
> > > > > .../devicetree/bindings/usb/msm-hsusb.txt | 17
> +++++++++++++++++
> > > >
> > > > Although you mentioned to Josh that this is intended for "non-
> standard"
> > > > Chipidea properties, I don't see any other than requiring that
> 'dr_mode'
> > > > must be "peripheral". It would seem that this should all be
> > > > integrated into a ci3xxx.txt.
> > >
> > > Hm, there is no ci3xxx.txt. The closest match is ci-hdrc-imx.txt.
> > > So it could be ci-hdrc-qcom.txt or my preferred name qcom,ci-hdrc.txt?
> >
> > Sorry, I was referring to ci13xxx-imx.txt, which was apparently moved
> > to ci-hdrc-imx.txt. I was recommending to merge the two into one
> > 'ci13xxx.txt', as this binding seems to be a new compatible for the
> > same basic chip. Now perhaps 'ci-hdrc.txt'.
> >
> > Although I agree with Josh that this name should be changed, and I
> > think either of your two suggestions would be acceptable, I would like
> > to at least discuss the possibility of actually merging the two in
> > this series.
> >
> > Comments?
>
>
> iMX version have required and recommender properties which are not
> meaningful for QCOM variant. I will prefer separate file. It depends on
> Freescale engineers (now in Cc:)
>
>
Unlike dwc3, there is no common dts entry for chipidea core, every platform
uses its own dts to cover both common and platform-specific properties.
I also have plan to use dwc3 style way for dts, but msm platform has still
not used dts, I don't know how many msm platforms need to change, once
you finish transferring msm to dts, I will split common and platform specific
entry.
Peter