Greetings,
What follows is the (hopefully) last take on the vexpress
infrastructure changes. With the exception of the first
patch, everything else has been discussed and acked
(or at least not naked) in the past:
http://thread.gmane.org/gmane.linux.kernel/1645586/
http://thread.gmane.org/gmane.linux.kernel/1619575/
I'd like to see it merged in the 3.16, so if there are
no major issues, I'll send a pull request next week.
The series, based on 3.15-rc3, is available at:
git://git.linaro.org/people/pawel.moll/linux.git vexpress/sysreg
Pawel Moll (9):
of: Keep track of populated platform devices
mfd: vexpress: Convert custom func API to regmap
mfd: syscon: Add platform data with a regmap config name
mfd: vexpress: Define the device as MFD cells
clk: versatile: Split config options for sp810 and vexpress_osc
clocksource: Sched clock source for Versatile Express
ARM: vexpress: Simplify SMP operations for DT-powered system
ARM: vexpress: move HBI check to sysreg driver
hwmon: vexpress: Use devm helper for hwmon device registration
Sudeep KarkadaNagesha (1):
ARM: vexpress: remove redundant vexpress_dt_cpus_num to get cpu count
.../devicetree/bindings/arm/vexpress-sysreg.txt | 79 ++-
Documentation/devicetree/bindings/arm/vexpress.txt | 15 +-
arch/arm/boot/dts/vexpress-v2m-rs1.dtsi | 76 ++-
arch/arm/boot/dts/vexpress-v2m.dtsi | 76 ++-
arch/arm/boot/dts/vexpress-v2p-ca15_a7.dts | 5 +-
arch/arm/mach-vexpress/core.h | 3 +-
arch/arm/mach-vexpress/ct-ca9x4.c | 10 +-
arch/arm/mach-vexpress/platsmp.c | 187 ++-----
arch/arm/mach-vexpress/v2m.c | 82 +--
arch/arm64/boot/dts/rtsm_ve-motherboard.dtsi | 2 +-
drivers/bus/Kconfig | 9 +
drivers/bus/Makefile | 2 +
drivers/bus/vexpress-config.c | 202 ++++++++
drivers/clk/Kconfig | 9 +-
drivers/clk/versatile/Kconfig | 26 +
drivers/clk/versatile/Makefile | 5 +-
drivers/clk/versatile/clk-vexpress-osc.c | 94 ++--
drivers/clocksource/Kconfig | 11 +
drivers/clocksource/Makefile | 1 +
drivers/clocksource/versatile.c | 40 ++
drivers/hwmon/vexpress.c | 104 ++--
drivers/mfd/Kconfig | 15 +-
drivers/mfd/Makefile | 2 +-
drivers/mfd/syscon.c | 4 +
drivers/mfd/vexpress-config.c | 287 -----------
drivers/mfd/vexpress-sysreg.c | 554 ++++++---------------
drivers/misc/Kconfig | 9 +
drivers/misc/Makefile | 1 +
drivers/misc/vexpress-syscfg.c | 324 ++++++++++++
drivers/of/platform.c | 10 +-
drivers/power/reset/vexpress-poweroff.c | 16 +-
drivers/regulator/vexpress.c | 50 +-
include/linux/of.h | 1 +
include/linux/platform_data/syscon.h | 8 +
include/linux/vexpress.h | 94 +---
35 files changed, 1209 insertions(+), 1204 deletions(-)
create mode 100644 drivers/bus/vexpress-config.c
create mode 100644 drivers/clk/versatile/Kconfig
create mode 100644 drivers/clocksource/versatile.c
delete mode 100644 drivers/mfd/vexpress-config.c
create mode 100644 drivers/misc/vexpress-syscfg.c
create mode 100644 include/linux/platform_data/syscon.h
--
1.9.1
On Mon, Apr 28, 2014 at 12:57 PM, Pawel Moll <[email protected]> wrote:
> In "Device Tree powered" systems, platform devices are usually
> massively populated with of_platform_populate() call, executed
> at some level of initcalls, either by generic architecture
> or by platform-specific code.
>
> There are situations though where certain devices must be
> created (and bound with drivers) before all the others.
> This presents a challenge, as devices created explicitly
> would be created again by of_platform_populate().
>
> This patch tries to solve that issue in a generic way,
> adding a "populated" flag for a DT node description.
> Once set, this device will never be created again via
> of_* API, so of_platform_populate() will skip such nodes
> (and its children) in a similar way to the non-available
> ones.
>
> Cc: [email protected]
> Signed-off-by: Pawel Moll <[email protected]>
> ---
> drivers/of/platform.c | 10 ++++++++--
> include/linux/of.h | 1 +
> 2 files changed, 9 insertions(+), 2 deletions(-)
>
> diff --git a/drivers/of/platform.c b/drivers/of/platform.c
> index 404d1da..0ae757a 100644
> --- a/drivers/of/platform.c
> +++ b/drivers/of/platform.c
> @@ -204,7 +204,8 @@ static struct platform_device *of_platform_device_create_pdata(
> {
> struct platform_device *dev;
>
> - if (!of_device_is_available(np))
> + if (!of_device_is_available(np) ||
> + of_node_check_flag(np, OF_POPULATED))
This and the amba case should be a test_and_set operation to avoid a
race condition.
Rob
As all cores must be properly described in the Device Tree,
there is no point in getting their numbers from SCU on
A5/A9 platforms. This significantly simplifies the code,
removing the need for flat-tree scanning and early static
mapping.
Signed-off-by: Pawel Moll <[email protected]>
---
arch/arm/mach-vexpress/core.h | 3 +-
arch/arm/mach-vexpress/platsmp.c | 158 ++++++++++-----------------------------
arch/arm/mach-vexpress/v2m.c | 6 +-
3 files changed, 41 insertions(+), 126 deletions(-)
diff --git a/arch/arm/mach-vexpress/core.h b/arch/arm/mach-vexpress/core.h
index bde4374..152fad9 100644
--- a/arch/arm/mach-vexpress/core.h
+++ b/arch/arm/mach-vexpress/core.h
@@ -4,10 +4,9 @@
/* Tile's peripherals static mappings should start here */
#define V2T_PERIPH 0xf8200000
-void vexpress_dt_smp_map_io(void);
-
bool vexpress_smp_init_ops(void);
extern struct smp_operations vexpress_smp_ops;
+extern struct smp_operations vexpress_smp_dt_ops;
extern void vexpress_cpu_die(unsigned int cpu);
diff --git a/arch/arm/mach-vexpress/platsmp.c b/arch/arm/mach-vexpress/platsmp.c
index 12a8751..a1f3804 100644
--- a/arch/arm/mach-vexpress/platsmp.c
+++ b/arch/arm/mach-vexpress/platsmp.c
@@ -12,8 +12,7 @@
#include <linux/errno.h>
#include <linux/smp.h>
#include <linux/io.h>
-#include <linux/of.h>
-#include <linux/of_fdt.h>
+#include <linux/of_address.h>
#include <linux/vexpress.h>
#include <asm/mcpm.h>
@@ -26,125 +25,13 @@
#include "core.h"
-#if defined(CONFIG_OF)
-
-static enum {
- GENERIC_SCU,
- CORTEX_A9_SCU,
-} vexpress_dt_scu __initdata = GENERIC_SCU;
-
-static struct map_desc vexpress_dt_cortex_a9_scu_map __initdata = {
- .virtual = V2T_PERIPH,
- /* .pfn set in vexpress_dt_init_cortex_a9_scu() */
- .length = SZ_128,
- .type = MT_DEVICE,
-};
-
-static void *vexpress_dt_cortex_a9_scu_base __initdata;
-
-const static char *vexpress_dt_cortex_a9_match[] __initconst = {
- "arm,cortex-a5-scu",
- "arm,cortex-a9-scu",
- NULL
-};
-
-static int __init vexpress_dt_find_scu(unsigned long node,
- const char *uname, int depth, void *data)
-{
- if (of_flat_dt_match(node, vexpress_dt_cortex_a9_match)) {
- phys_addr_t phys_addr;
- __be32 *reg = of_get_flat_dt_prop(node, "reg", NULL);
-
- if (WARN_ON(!reg))
- return -EINVAL;
-
- phys_addr = be32_to_cpup(reg);
- vexpress_dt_scu = CORTEX_A9_SCU;
-
- vexpress_dt_cortex_a9_scu_map.pfn = __phys_to_pfn(phys_addr);
- iotable_init(&vexpress_dt_cortex_a9_scu_map, 1);
- vexpress_dt_cortex_a9_scu_base = ioremap(phys_addr, SZ_256);
- if (WARN_ON(!vexpress_dt_cortex_a9_scu_base))
- return -EFAULT;
- }
-
- return 0;
-}
-
-void __init vexpress_dt_smp_map_io(void)
-{
- if (initial_boot_params)
- WARN_ON(of_scan_flat_dt(vexpress_dt_find_scu, NULL));
-}
-
-static void __init vexpress_dt_smp_init_cpus(void)
-{
- int ncores = 0, i;
-
- switch (vexpress_dt_scu) {
- case GENERIC_SCU:
- return;
- case CORTEX_A9_SCU:
- ncores = scu_get_core_count(vexpress_dt_cortex_a9_scu_base);
- break;
- default:
- WARN_ON(1);
- break;
- }
-
- if (ncores < 2)
- return;
-
- if (ncores > nr_cpu_ids) {
- pr_warn("SMP: %u cores greater than maximum (%u), clipping\n",
- ncores, nr_cpu_ids);
- ncores = nr_cpu_ids;
- }
-
- for (i = 0; i < ncores; ++i)
- set_cpu_possible(i, true);
-}
-
-static void __init vexpress_dt_smp_prepare_cpus(unsigned int max_cpus)
-{
-
- switch (vexpress_dt_scu) {
- case GENERIC_SCU:
- break;
- case CORTEX_A9_SCU:
- scu_enable(vexpress_dt_cortex_a9_scu_base);
- break;
- default:
- WARN_ON(1);
- break;
- }
-}
-
-#else
-
-static void __init vexpress_dt_smp_init_cpus(void)
-{
- WARN_ON(1);
-}
-
-void __init vexpress_dt_smp_prepare_cpus(unsigned int max_cpus)
-{
- WARN_ON(1);
-}
-
-#endif
-
/*
* Initialise the CPU possible map early - this describes the CPUs
* which may be present or become present in the system.
*/
static void __init vexpress_smp_init_cpus(void)
{
- if (ct_desc)
- ct_desc->init_cpu_map();
- else
- vexpress_dt_smp_init_cpus();
-
+ ct_desc->init_cpu_map();
}
static void __init vexpress_smp_prepare_cpus(unsigned int max_cpus)
@@ -153,10 +40,7 @@ static void __init vexpress_smp_prepare_cpus(unsigned int max_cpus)
* Initialise the present map, which describes the set of CPUs
* actually populated at the present time.
*/
- if (ct_desc)
- ct_desc->smp_enable(max_cpus);
- else
- vexpress_dt_smp_prepare_cpus(max_cpus);
+ ct_desc->smp_enable(max_cpus);
/*
* Write the address of secondary startup into the
@@ -194,3 +78,39 @@ bool __init vexpress_smp_init_ops(void)
#endif
return false;
}
+
+#if defined(CONFIG_OF)
+
+static const struct of_device_id vexpress_smp_dt_scu_match[] __initconst = {
+ { .compatible = "arm,cortex-a5-scu", },
+ { .compatible = "arm,cortex-a9-scu", },
+ {}
+};
+
+static void __init vexpress_smp_dt_prepare_cpus(unsigned int max_cpus)
+{
+ struct device_node *scu = of_find_matching_node(NULL,
+ vexpress_smp_dt_scu_match);
+
+ if (scu)
+ scu_enable(of_iomap(scu, 0));
+
+ /*
+ * Write the address of secondary startup into the
+ * system-wide flags register. The boot monitor waits
+ * until it receives a soft interrupt, and then the
+ * secondary CPU branches to this address.
+ */
+ vexpress_flags_set(virt_to_phys(versatile_secondary_startup));
+}
+
+struct smp_operations __initdata vexpress_smp_dt_ops = {
+ .smp_prepare_cpus = vexpress_smp_dt_prepare_cpus,
+ .smp_secondary_init = versatile_secondary_init,
+ .smp_boot_secondary = versatile_boot_secondary,
+#ifdef CONFIG_HOTPLUG_CPU
+ .cpu_die = vexpress_cpu_die,
+#endif
+};
+
+#endif
diff --git a/arch/arm/mach-vexpress/v2m.c b/arch/arm/mach-vexpress/v2m.c
index d8a9fd7..d8b419b 100644
--- a/arch/arm/mach-vexpress/v2m.c
+++ b/arch/arm/mach-vexpress/v2m.c
@@ -400,10 +400,6 @@ void __init v2m_dt_map_io(void)
iotable_init(&v2m_rs1_io_desc, 1);
else
iotable_init(v2m_io_desc, ARRAY_SIZE(v2m_io_desc));
-
-#if defined(CONFIG_SMP)
- vexpress_dt_smp_map_io();
-#endif
}
void __init v2m_dt_init_early(void)
@@ -434,7 +430,7 @@ static const char * const v2m_dt_match[] __initconst = {
DT_MACHINE_START(VEXPRESS_DT, "ARM-Versatile Express")
.dt_compat = v2m_dt_match,
- .smp = smp_ops(vexpress_smp_ops),
+ .smp = smp_ops(vexpress_smp_dt_ops),
.smp_init = smp_init_ops(vexpress_smp_init_ops),
.map_io = v2m_dt_map_io,
.init_early = v2m_dt_init_early,
--
1.9.1
This patch adds a trival sched clock source using free
running, 24MHz clocked counter present in the ARM Ltd.
reference platforms (Versatile, RealView, Versatile
Express) System Registers block.
This code replaces the call in the VE machine code.
Cc: Daniel Lezcano <[email protected]>
Cc: Thomas Gleixner <[email protected]>
Signed-off-by: Pawel Moll <[email protected]>
---
arch/arm/mach-vexpress/v2m.c | 2 --
drivers/clocksource/Kconfig | 11 +++++++++++
drivers/clocksource/Makefile | 1 +
drivers/clocksource/versatile.c | 40 ++++++++++++++++++++++++++++++++++++++++
4 files changed, 52 insertions(+), 2 deletions(-)
create mode 100644 drivers/clocksource/versatile.c
diff --git a/arch/arm/mach-vexpress/v2m.c b/arch/arm/mach-vexpress/v2m.c
index 90f04c9..d8a9fd7 100644
--- a/arch/arm/mach-vexpress/v2m.c
+++ b/arch/arm/mach-vexpress/v2m.c
@@ -418,8 +418,6 @@ void __init v2m_dt_init_early(void)
pr_warning("vexpress: DT HBI (%x) is not matching "
"hardware (%x)!\n", dt_hbi, hbi);
}
-
- versatile_sched_clock_init(vexpress_get_24mhz_clock_base(), 24000000);
}
diff --git a/drivers/clocksource/Kconfig b/drivers/clocksource/Kconfig
index 96918e1..2c27b02 100644
--- a/drivers/clocksource/Kconfig
+++ b/drivers/clocksource/Kconfig
@@ -191,3 +191,14 @@ config EM_TIMER_STI
config CLKSRC_QCOM
bool
+
+config CLKSRC_VERSATILE
+ bool "ARM Versatile (Express) reference platforms clock source"
+ depends on GENERIC_SCHED_CLOCK
+ select CLKSRC_OF
+ default y if MFD_VEXPRESS_SYSREG
+ help
+ This option enables clock source based on free running
+ counter available in the "System Registers" block of
+ ARM Versatile, RealView and Versatile Express reference
+ platforms.
diff --git a/drivers/clocksource/Makefile b/drivers/clocksource/Makefile
index 98cb6c5..6f25bdf 100644
--- a/drivers/clocksource/Makefile
+++ b/drivers/clocksource/Makefile
@@ -39,3 +39,4 @@ obj-$(CONFIG_ARM_GLOBAL_TIMER) += arm_global_timer.o
obj-$(CONFIG_CLKSRC_METAG_GENERIC) += metag_generic.o
obj-$(CONFIG_ARCH_HAS_TICK_BROADCAST) += dummy_timer.o
obj-$(CONFIG_ARCH_KEYSTONE) += timer-keystone.o
+obj-$(CONFIG_CLKSRC_VERSATILE) += versatile.o
diff --git a/drivers/clocksource/versatile.c b/drivers/clocksource/versatile.c
new file mode 100644
index 0000000..e4c50ad
--- /dev/null
+++ b/drivers/clocksource/versatile.c
@@ -0,0 +1,40 @@
+/*
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * Copyright (C) 2014 ARM Limited
+ */
+
+#include <linux/clocksource.h>
+#include <linux/io.h>
+#include <linux/of_address.h>
+#include <linux/sched_clock.h>
+
+#define SYS_24MHZ 0x05c
+
+static void __iomem *versatile_sys_24mhz;
+
+static u32 notrace versatile_sys_24mhz_read(void)
+{
+ return readl(versatile_sys_24mhz);
+}
+
+static void __init versatile_sched_clock_init(struct device_node *node)
+{
+ void __iomem *base = of_iomap(node, 0);
+
+ if (!base)
+ return;
+
+ versatile_sys_24mhz = base + SYS_24MHZ;
+
+ setup_sched_clock(versatile_sys_24mhz_read, 32, 24000000);
+}
+CLOCKSOURCE_OF_DECLARE(versatile, "arm,vexpress-sysreg",
+ versatile_sched_clock_init);
--
1.9.1
Define syscon platform data structure that can be used
to define a regmap config name. This is particularly useful
in the regmap debugfs when there is more than one syscon
device registered, to distinguish the register blocks.
Signed-off-by: Pawel Moll <[email protected]>
Acked-by: Lee Jones <[email protected]>
---
drivers/mfd/syscon.c | 4 ++++
include/linux/platform_data/syscon.h | 8 ++++++++
2 files changed, 12 insertions(+)
create mode 100644 include/linux/platform_data/syscon.h
diff --git a/drivers/mfd/syscon.c b/drivers/mfd/syscon.c
index dbea55d..e2a04bb 100644
--- a/drivers/mfd/syscon.c
+++ b/drivers/mfd/syscon.c
@@ -18,6 +18,7 @@
#include <linux/of.h>
#include <linux/of_address.h>
#include <linux/of_platform.h>
+#include <linux/platform_data/syscon.h>
#include <linux/platform_device.h>
#include <linux/regmap.h>
#include <linux/mfd/syscon.h>
@@ -119,6 +120,7 @@ static struct regmap_config syscon_regmap_config = {
static int syscon_probe(struct platform_device *pdev)
{
struct device *dev = &pdev->dev;
+ struct syscon_platform_data *pdata = dev_get_platdata(dev);
struct syscon *syscon;
struct resource *res;
void __iomem *base;
@@ -136,6 +138,8 @@ static int syscon_probe(struct platform_device *pdev)
return -ENOMEM;
syscon_regmap_config.max_register = res->end - res->start - 3;
+ if (pdata)
+ syscon_regmap_config.name = pdata->label;
syscon->regmap = devm_regmap_init_mmio(dev, base,
&syscon_regmap_config);
if (IS_ERR(syscon->regmap)) {
diff --git a/include/linux/platform_data/syscon.h b/include/linux/platform_data/syscon.h
new file mode 100644
index 0000000..2354c6f
--- /dev/null
+++ b/include/linux/platform_data/syscon.h
@@ -0,0 +1,8 @@
+#ifndef PLATFORM_DATA_SYSCON_H
+#define PLATFORM_DATA_SYSCON_H
+
+struct syscon_platform_data {
+ const char *label;
+};
+
+#endif
--
1.9.1
Move the Kconfig entry for Versatile (& Express) clock drivers
into a separate file and add individual options for sp810
and vexpress_osc drivers, as they are optional in some
configurations and may have separate dependencies.
Cc: Mike Turquette <[email protected]>
Signed-off-by: Pawel Moll <[email protected]>
---
drivers/clk/Kconfig | 9 +--------
drivers/clk/versatile/Kconfig | 26 ++++++++++++++++++++++++++
drivers/clk/versatile/Makefile | 5 +++--
3 files changed, 30 insertions(+), 10 deletions(-)
create mode 100644 drivers/clk/versatile/Kconfig
diff --git a/drivers/clk/Kconfig b/drivers/clk/Kconfig
index 6f56d3a..4fdfd6c 100644
--- a/drivers/clk/Kconfig
+++ b/drivers/clk/Kconfig
@@ -30,14 +30,7 @@ config COMMON_CLK_WM831X
Supports the clocking subsystem of the WM831x/2x series of
PMICs from Wolfson Microlectronics.
-config COMMON_CLK_VERSATILE
- bool "Clock driver for ARM Reference designs"
- depends on ARCH_INTEGRATOR || ARCH_REALVIEW || ARCH_VEXPRESS || ARM64
- ---help---
- Supports clocking on ARM Reference designs:
- - Integrator/AP and Integrator/CP
- - RealView PB1176, EB, PB11MP and PBX
- - Versatile Express
+source "drivers/clk/versatile/Kconfig"
config COMMON_CLK_MAX77686
tristate "Clock driver for Maxim 77686 MFD"
diff --git a/drivers/clk/versatile/Kconfig b/drivers/clk/versatile/Kconfig
new file mode 100644
index 0000000..1530c93
--- /dev/null
+++ b/drivers/clk/versatile/Kconfig
@@ -0,0 +1,26 @@
+config COMMON_CLK_VERSATILE
+ bool "Clock driver for ARM Reference designs"
+ depends on ARCH_INTEGRATOR || ARCH_REALVIEW || ARCH_VEXPRESS || ARM64
+ ---help---
+ Supports clocking on ARM Reference designs:
+ - Integrator/AP and Integrator/CP
+ - RealView PB1176, EB, PB11MP and PBX
+ - Versatile Express
+
+config CLK_SP810
+ bool "Clock driver for ARM SP810 System Controller"
+ depends on COMMON_CLK_VERSATILE
+ default y if ARCH_VEXPRESS
+ ---help---
+ Supports clock muxing (REFCLK/TIMCLK to TIMERCLKEN0-3) capabilities
+ of the ARM SP810 System Controller cell.
+
+config CLK_VEXPRESS_OSC
+ bool "Clock driver for Versatile Express OSC clock generators"
+ depends on COMMON_CLK_VERSATILE
+ depends on VEXPRESS_CONFIG
+ default y if ARCH_VEXPRESS
+ ---help---
+ Simple regmap-based driver driving clock generators on Versatile
+ Express platforms hidden behind its configuration infrastructure,
+ commonly known as OSCs.
diff --git a/drivers/clk/versatile/Makefile b/drivers/clk/versatile/Makefile
index c16ca78..fd449f9 100644
--- a/drivers/clk/versatile/Makefile
+++ b/drivers/clk/versatile/Makefile
@@ -3,5 +3,6 @@ obj-$(CONFIG_ICST) += clk-icst.o
obj-$(CONFIG_ARCH_INTEGRATOR) += clk-integrator.o
obj-$(CONFIG_INTEGRATOR_IMPD1) += clk-impd1.o
obj-$(CONFIG_ARCH_REALVIEW) += clk-realview.o
-obj-$(CONFIG_ARCH_VEXPRESS) += clk-vexpress.o clk-sp810.o
-obj-$(CONFIG_VEXPRESS_CONFIG) += clk-vexpress-osc.o
+obj-$(CONFIG_ARCH_VEXPRESS) += clk-vexpress.o
+obj-$(CONFIG_CLK_SP810) += clk-sp810.o
+obj-$(CONFIG_CLK_VEXPRESS_OSC) += clk-vexpress-osc.o
--
1.9.1
Use devm_hwmon_device_register_with_groups instead of
the old-style manual attributes and hwmon device registration.
Also, unwind the attribute group macros for better code
readability.
Cc: Jean Delvare <[email protected]>
Cc: Guenter Roeck <[email protected]>
Cc: [email protected]
Signed-off-by: Pawel Moll <[email protected]>
---
drivers/hwmon/vexpress.c | 91 ++++++++++++++++--------------------------------
1 file changed, 30 insertions(+), 61 deletions(-)
diff --git a/drivers/hwmon/vexpress.c b/drivers/hwmon/vexpress.c
index d853332..ed6bf0e 100644
--- a/drivers/hwmon/vexpress.c
+++ b/drivers/hwmon/vexpress.c
@@ -27,17 +27,8 @@
struct vexpress_hwmon_data {
struct device *hwmon_dev;
struct regmap *reg;
- const char *name;
};
-static ssize_t vexpress_hwmon_name_show(struct device *dev,
- struct device_attribute *dev_attr, char *buffer)
-{
- struct vexpress_hwmon_data *data = dev_get_drvdata(dev);
-
- return sprintf(buffer, "%s\n", data->name);
-}
-
static ssize_t vexpress_hwmon_label_show(struct device *dev,
struct device_attribute *dev_attr, char *buffer)
{
@@ -95,16 +86,6 @@ static umode_t vexpress_hwmon_attr_is_visible(struct kobject *kobj,
return attr->mode;
}
-static DEVICE_ATTR(name, S_IRUGO, vexpress_hwmon_name_show, NULL);
-
-#define VEXPRESS_HWMON_ATTRS(_name, _label_attr, _input_attr) \
-struct attribute *vexpress_hwmon_attrs_##_name[] = { \
- &dev_attr_name.attr, \
- &dev_attr_##_label_attr.attr, \
- &sensor_dev_attr_##_input_attr.dev_attr.attr, \
- NULL \
-}
-
struct vexpress_hwmon_type {
const char *name;
const struct attribute_group **attr_groups;
@@ -114,10 +95,13 @@ struct vexpress_hwmon_type {
static DEVICE_ATTR(in1_label, S_IRUGO, vexpress_hwmon_label_show, NULL);
static SENSOR_DEVICE_ATTR(in1_input, S_IRUGO, vexpress_hwmon_u32_show,
NULL, 1000);
-static VEXPRESS_HWMON_ATTRS(volt, in1_label, in1_input);
static struct attribute_group vexpress_hwmon_group_volt = {
.is_visible = vexpress_hwmon_attr_is_visible,
- .attrs = vexpress_hwmon_attrs_volt,
+ .attrs = (struct attribute *[]) {
+ &dev_attr_in1_label.attr,
+ &sensor_dev_attr_in1_input.dev_attr.attr,
+ NULL
+ },
};
static struct vexpress_hwmon_type vexpress_hwmon_volt = {
.name = "vexpress_volt",
@@ -131,10 +115,13 @@ static struct vexpress_hwmon_type vexpress_hwmon_volt = {
static DEVICE_ATTR(curr1_label, S_IRUGO, vexpress_hwmon_label_show, NULL);
static SENSOR_DEVICE_ATTR(curr1_input, S_IRUGO, vexpress_hwmon_u32_show,
NULL, 1000);
-static VEXPRESS_HWMON_ATTRS(amp, curr1_label, curr1_input);
static struct attribute_group vexpress_hwmon_group_amp = {
.is_visible = vexpress_hwmon_attr_is_visible,
- .attrs = vexpress_hwmon_attrs_amp,
+ .attrs = (struct attribute *[]) {
+ &dev_attr_curr1_label.attr,
+ &sensor_dev_attr_curr1_input.dev_attr.attr,
+ NULL
+ },
};
static struct vexpress_hwmon_type vexpress_hwmon_amp = {
.name = "vexpress_amp",
@@ -147,10 +134,13 @@ static struct vexpress_hwmon_type vexpress_hwmon_amp = {
static DEVICE_ATTR(temp1_label, S_IRUGO, vexpress_hwmon_label_show, NULL);
static SENSOR_DEVICE_ATTR(temp1_input, S_IRUGO, vexpress_hwmon_u32_show,
NULL, 1000);
-static VEXPRESS_HWMON_ATTRS(temp, temp1_label, temp1_input);
static struct attribute_group vexpress_hwmon_group_temp = {
.is_visible = vexpress_hwmon_attr_is_visible,
- .attrs = vexpress_hwmon_attrs_temp,
+ .attrs = (struct attribute *[]) {
+ &dev_attr_temp1_label.attr,
+ &sensor_dev_attr_temp1_input.dev_attr.attr,
+ NULL
+ },
};
static struct vexpress_hwmon_type vexpress_hwmon_temp = {
.name = "vexpress_temp",
@@ -163,10 +153,13 @@ static struct vexpress_hwmon_type vexpress_hwmon_temp = {
static DEVICE_ATTR(power1_label, S_IRUGO, vexpress_hwmon_label_show, NULL);
static SENSOR_DEVICE_ATTR(power1_input, S_IRUGO, vexpress_hwmon_u32_show,
NULL, 1);
-static VEXPRESS_HWMON_ATTRS(power, power1_label, power1_input);
static struct attribute_group vexpress_hwmon_group_power = {
.is_visible = vexpress_hwmon_attr_is_visible,
- .attrs = vexpress_hwmon_attrs_power,
+ .attrs = (struct attribute *[]) {
+ &dev_attr_power1_label.attr,
+ &sensor_dev_attr_power1_input.dev_attr.attr,
+ NULL
+ },
};
static struct vexpress_hwmon_type vexpress_hwmon_power = {
.name = "vexpress_power",
@@ -179,10 +172,13 @@ static struct vexpress_hwmon_type vexpress_hwmon_power = {
static DEVICE_ATTR(energy1_label, S_IRUGO, vexpress_hwmon_label_show, NULL);
static SENSOR_DEVICE_ATTR(energy1_input, S_IRUGO, vexpress_hwmon_u64_show,
NULL, 1);
-static VEXPRESS_HWMON_ATTRS(energy, energy1_label, energy1_input);
static struct attribute_group vexpress_hwmon_group_energy = {
.is_visible = vexpress_hwmon_attr_is_visible,
- .attrs = vexpress_hwmon_attrs_energy,
+ .attrs = (struct attribute *[]) {
+ &dev_attr_energy1_label.attr,
+ &sensor_dev_attr_energy1_input.dev_attr.attr,
+ NULL
+ },
};
static struct vexpress_hwmon_type vexpress_hwmon_energy = {
.name = "vexpress_energy",
@@ -218,7 +214,6 @@ MODULE_DEVICE_TABLE(of, vexpress_hwmon_of_match);
static int vexpress_hwmon_probe(struct platform_device *pdev)
{
- int err;
const struct of_device_id *match;
struct vexpress_hwmon_data *data;
const struct vexpress_hwmon_type *type;
@@ -232,45 +227,19 @@ static int vexpress_hwmon_probe(struct platform_device *pdev)
if (!match)
return -ENODEV;
type = match->data;
- data->name = type->name;
data->reg = devm_regmap_init_vexpress_config(&pdev->dev);
- if (!data->reg)
- return -ENODEV;
-
- err = sysfs_create_groups(&pdev->dev.kobj, type->attr_groups);
- if (err)
- goto error;
-
- data->hwmon_dev = hwmon_device_register(&pdev->dev);
- if (IS_ERR(data->hwmon_dev)) {
- err = PTR_ERR(data->hwmon_dev);
- goto error;
- }
+ if (IS_ERR(data->reg))
+ return PTR_ERR(data->reg);
- return 0;
-
-error:
- sysfs_remove_group(&pdev->dev.kobj, match->data);
- return err;
-}
-
-static int vexpress_hwmon_remove(struct platform_device *pdev)
-{
- struct vexpress_hwmon_data *data = platform_get_drvdata(pdev);
- const struct of_device_id *match;
-
- hwmon_device_unregister(data->hwmon_dev);
-
- match = of_match_device(vexpress_hwmon_of_match, &pdev->dev);
- sysfs_remove_group(&pdev->dev.kobj, match->data);
+ data->hwmon_dev = devm_hwmon_device_register_with_groups(&pdev->dev,
+ type->name, data, type->attr_groups);
- return 0;
+ return PTR_ERR_OR_ZERO(data->hwmon_dev);
}
static struct platform_driver vexpress_hwmon_driver = {
.probe = vexpress_hwmon_probe,
- .remove = vexpress_hwmon_remove,
.driver = {
.name = DRVNAME,
.owner = THIS_MODULE,
--
1.9.1
Components of the Versatile Express platform (configuration
microcontrollers on motherboard and daughterboards in particular)
talk to each other over a custom configuration bus. They
provide miscellaneous functions (from clock generator control
to energy sensors) which are represented as platform devices
(and Device Tree nodes). The transactions on the bus can
be generated by different "bridges" in the system, some
of which are universal for the whole platform (for the price
of high transfer latencies), others restricted to a subsystem
(but much faster).
Until now drivers for such functions were using custom "func"
API, which is being replaced in this patch by regmap calls.
This required:
* a rework (and move to drivers/bus directory, as suggested
by Samuel and Arnd) of the config bus core, which is much
simpler now and uses device model infrastructure (class)
to keep track of the bridges; non-DT case (soon to be
retired anyway) is simply covered by a special device
registration function
* the new config-bus driver also takes over device population,
so there is no need for special matching table for
of_platform_populate nor "simple-bus" hack in the arm64
model dtsi file (relevant bindings documentation has
been updated); this allows all the vexpress devices
fit into normal device model, making it possible
to remove plenty of early inits and other hacks in
the near future
* adaptation of the syscfg bridge implementation in the
sysreg driver, again making it much simpler; there is
a special case of the "energy" function spanning two
registers, where they should be both defined in the tree
now, but backward compatibility is maintained in the code
* modification of the relevant drivers:
* hwmon - just a straight-forward API change
* power/reset driver - API change
* regulator - API change plus error handling
simplification
* osc clock driver - this one required larger rework
in order to turn in into a standard platform driver
Cc: Jean Delvare <[email protected]>
Cc: Guenter Roeck <[email protected]>
Cc: [email protected]
Cc: Mark Brown <[email protected]>
Cc: Liam Girdwood <[email protected]>
Cc: David Woodhouse <[email protected]>
Cc: Dmitry Eremin-Solenikov <[email protected]>
Cc: Mike Turquette <[email protected]>
Signed-off-by: Pawel Moll <[email protected]>
---
.../devicetree/bindings/arm/vexpress-sysreg.txt | 43 ++-
Documentation/devicetree/bindings/arm/vexpress.txt | 15 +-
arch/arm/boot/dts/vexpress-v2p-ca15_a7.dts | 5 +-
arch/arm/mach-vexpress/ct-ca9x4.c | 10 +-
arch/arm/mach-vexpress/v2m.c | 18 +-
arch/arm64/boot/dts/rtsm_ve-motherboard.dtsi | 2 +-
drivers/bus/Kconfig | 9 +
drivers/bus/Makefile | 2 +
drivers/bus/vexpress-config.c | 202 +++++++++++
drivers/clk/versatile/clk-vexpress-osc.c | 94 +++--
drivers/hwmon/vexpress.c | 15 +-
drivers/mfd/Makefile | 2 +-
drivers/mfd/vexpress-config.c | 287 ---------------
drivers/mfd/vexpress-sysreg.c | 395 +++++++++++----------
drivers/power/reset/vexpress-poweroff.c | 16 +-
drivers/regulator/vexpress.c | 50 +--
include/linux/vexpress.h | 79 +----
17 files changed, 567 insertions(+), 677 deletions(-)
create mode 100644 drivers/bus/vexpress-config.c
delete mode 100644 drivers/mfd/vexpress-config.c
diff --git a/Documentation/devicetree/bindings/arm/vexpress-sysreg.txt b/Documentation/devicetree/bindings/arm/vexpress-sysreg.txt
index 5580e9c..57b423f 100644
--- a/Documentation/devicetree/bindings/arm/vexpress-sysreg.txt
+++ b/Documentation/devicetree/bindings/arm/vexpress-sysreg.txt
@@ -27,24 +27,45 @@ Example:
This block also can also act a bridge to the platform's configuration
bus via "system control" interface, addressing devices with site number,
position in the board stack, config controller, function and device
-numbers - see motherboard's TRM for more details.
-
-The node describing a config device must refer to the sysreg node via
-"arm,vexpress,config-bridge" phandle (can be also defined in the node's
-parent) and relies on the board topology properties - see main vexpress
-node documentation for more details. It must also define the following
-property:
-- arm,vexpress-sysreg,func : must contain two cells:
- - first cell defines function number (eg. 1 for clock generator,
- 2 for voltage regulators etc.)
- - device number (eg. osc 0, osc 1 etc.)
+numbers - see motherboard's TRM for more details. All configuration
+controller accessible via this interface must reference the sysreg
+node via "arm,vexpress,config-bridge" phandle and define appropriate
+topology properties - see main vexpress node documentation for more
+details. Each child of such node describes one function and must
+define the following properties:
+- compatible value : must be one of (corresponding to the TRM):
+ "arm,vexpress-amp"
+ "arm,vexpress-dvimode"
+ "arm,vexpress-energy"
+ "arm,vexpress-muxfpga"
+ "arm,vexpress-osc"
+ "arm,vexpress-power"
+ "arm,vexpress-reboot"
+ "arm,vexpress-reset"
+ "arm,vexpress-scc"
+ "arm,vexpress-shutdown"
+ "arm,vexpress-temp"
+ "arm,vexpress-volt"
+- arm,vexpress-sysreg,func : must contain a set of two cells long groups:
+ - first cell of each group defines the function number
+ (eg. 1 for clock generator, 2 for voltage regulators etc.)
+ - second cell of each group defines device number (eg. osc 0,
+ osc 1 etc.)
+ - some functions (eg. energy meter, with its 64 bit long counter)
+ are using more than one function/device number pair
Example:
mcc {
+ compatible = "arm,vexpress,config-bus";
arm,vexpress,config-bridge = <&v2m_sysreg>;
osc@0 {
compatible = "arm,vexpress-osc";
arm,vexpress-sysreg,func = <1 0>;
};
+
+ energy@0 {
+ compatible = "arm,vexpress-energy";
+ arm,vexpress-sysreg,func = <13 0>, <13 1>;
+ };
};
diff --git a/Documentation/devicetree/bindings/arm/vexpress.txt b/Documentation/devicetree/bindings/arm/vexpress.txt
index ae49161..39844cd 100644
--- a/Documentation/devicetree/bindings/arm/vexpress.txt
+++ b/Documentation/devicetree/bindings/arm/vexpress.txt
@@ -80,12 +80,17 @@ but also control clock generators, voltage regulators, gather
environmental data like temperature, power consumption etc. Even
the video output switch (FPGA) is controlled that way.
-Nodes describing devices controlled by this infrastructure should
-point at the bridge device node:
+The controllers are not mapped into normal memory address space
+and must be accessed through bridges - other devices capable
+of generating transactions on the configuration bus.
+
+The nodes describing configuration controllers must define
+the following properties:
+- compatible value:
+ compatible = "arm,vexpress,config-bus";
- bridge phandle:
arm,vexpress,config-bridge = <phandle>;
-This property can be also defined in a parent node (eg. for a DCC)
-and is effective for all children.
+and children describing available functions.
Platform topology
@@ -197,7 +202,7 @@ Example of a VE tile description (simplified)
};
dcc {
- compatible = "simple-bus";
+ compatible = "arm,vexpress,config-bus";
arm,vexpress,config-bridge = <&v2m_sysreg>;
osc@0 {
diff --git a/arch/arm/boot/dts/vexpress-v2p-ca15_a7.dts b/arch/arm/boot/dts/vexpress-v2p-ca15_a7.dts
index 15f98cb..a25c262 100644
--- a/arch/arm/boot/dts/vexpress-v2p-ca15_a7.dts
+++ b/arch/arm/boot/dts/vexpress-v2p-ca15_a7.dts
@@ -312,6 +312,7 @@
arm,vexpress-sysreg,func = <12 0>;
label = "A15 Pcore";
};
+
power@1 {
/* Total power for the three A7 cores */
compatible = "arm,vexpress-power";
@@ -322,14 +323,14 @@
energy@0 {
/* Total energy for the two A15 cores */
compatible = "arm,vexpress-energy";
- arm,vexpress-sysreg,func = <13 0>;
+ arm,vexpress-sysreg,func = <13 0>, <13 1>;
label = "A15 Jcore";
};
energy@2 {
/* Total energy for the three A7 cores */
compatible = "arm,vexpress-energy";
- arm,vexpress-sysreg,func = <13 2>;
+ arm,vexpress-sysreg,func = <13 2>, <13 3>;
label = "A7 Jcore";
};
};
diff --git a/arch/arm/mach-vexpress/ct-ca9x4.c b/arch/arm/mach-vexpress/ct-ca9x4.c
index 6f34497..35e394a 100644
--- a/arch/arm/mach-vexpress/ct-ca9x4.c
+++ b/arch/arm/mach-vexpress/ct-ca9x4.c
@@ -128,6 +128,10 @@ static struct platform_device pmu_device = {
.resource = pmu_resources,
};
+static struct clk_lookup osc1_lookup = {
+ .dev_id = "ct:clcd",
+};
+
static struct platform_device osc1_device = {
.name = "vexpress-osc",
.id = 1,
@@ -135,6 +139,7 @@ static struct platform_device osc1_device = {
.resource = (struct resource []) {
VEXPRESS_RES_FUNC(0xf, 1),
},
+ .dev.platform_data = &osc1_lookup,
};
static void __init ct_ca9x4_init(void)
@@ -155,10 +160,7 @@ static void __init ct_ca9x4_init(void)
amba_device_register(ct_ca9x4_amba_devs[i], &iomem_resource);
platform_device_register(&pmu_device);
- platform_device_register(&osc1_device);
-
- WARN_ON(clk_register_clkdev(vexpress_osc_setup(&osc1_device.dev),
- NULL, "ct:clcd"));
+ vexpress_sysreg_config_device_register(&osc1_device);
}
#ifdef CONFIG_SMP
diff --git a/arch/arm/mach-vexpress/v2m.c b/arch/arm/mach-vexpress/v2m.c
index 4f8b8cb..ac95220 100644
--- a/arch/arm/mach-vexpress/v2m.c
+++ b/arch/arm/mach-vexpress/v2m.c
@@ -340,11 +340,6 @@ static void __init v2m_init(void)
regulator_register_fixed(0, v2m_eth_supplies,
ARRAY_SIZE(v2m_eth_supplies));
- platform_device_register(&v2m_muxfpga_device);
- platform_device_register(&v2m_shutdown_device);
- platform_device_register(&v2m_reboot_device);
- platform_device_register(&v2m_dvimode_device);
-
platform_device_register(&v2m_sysreg_device);
platform_device_register(&v2m_pcie_i2c_device);
platform_device_register(&v2m_ddc_i2c_device);
@@ -356,6 +351,11 @@ static void __init v2m_init(void)
for (i = 0; i < ARRAY_SIZE(v2m_amba_devs); i++)
amba_device_register(v2m_amba_devs[i], &iomem_resource);
+ vexpress_sysreg_config_device_register(&v2m_muxfpga_device);
+ vexpress_sysreg_config_device_register(&v2m_shutdown_device);
+ vexpress_sysreg_config_device_register(&v2m_reboot_device);
+ vexpress_sysreg_config_device_register(&v2m_dvimode_device);
+
ct_desc->init_tile();
}
@@ -423,17 +423,11 @@ void __init v2m_dt_init_early(void)
versatile_sched_clock_init(vexpress_get_24mhz_clock_base(), 24000000);
}
-static const struct of_device_id v2m_dt_bus_match[] __initconst = {
- { .compatible = "simple-bus", },
- { .compatible = "arm,amba-bus", },
- { .compatible = "arm,vexpress,config-bus", },
- {}
-};
static void __init v2m_dt_init(void)
{
l2x0_of_init(0x00400000, 0xfe0fffff);
- of_platform_populate(NULL, v2m_dt_bus_match, NULL, NULL);
+ of_platform_populate(NULL, of_default_bus_match_table, NULL, NULL);
}
static const char * const v2m_dt_match[] __initconst = {
diff --git a/arch/arm64/boot/dts/rtsm_ve-motherboard.dtsi b/arch/arm64/boot/dts/rtsm_ve-motherboard.dtsi
index 2f2ecd2..ac2cb24 100644
--- a/arch/arm64/boot/dts/rtsm_ve-motherboard.dtsi
+++ b/arch/arm64/boot/dts/rtsm_ve-motherboard.dtsi
@@ -200,7 +200,7 @@
};
mcc {
- compatible = "arm,vexpress,config-bus", "simple-bus";
+ compatible = "arm,vexpress,config-bus";
arm,vexpress,config-bridge = <&v2m_sysreg>;
v2m_oscclk1: osc@1 {
diff --git a/drivers/bus/Kconfig b/drivers/bus/Kconfig
index 552373c..f24e79d 100644
--- a/drivers/bus/Kconfig
+++ b/drivers/bus/Kconfig
@@ -41,4 +41,13 @@ config ARM_CCI
help
Driver supporting the CCI cache coherent interconnect for ARM
platforms.
+
+config VEXPRESS_CONFIG
+ bool "Versatile Express configuration bus"
+ default y if ARCH_VEXPRESS
+ depends on ARM || ARM64
+ select REGMAP
+ help
+ Platform configuration infrastructure for the ARM Ltd.
+ Versatile Express.
endmenu
diff --git a/drivers/bus/Makefile b/drivers/bus/Makefile
index 8947bdd..f095aa7 100644
--- a/drivers/bus/Makefile
+++ b/drivers/bus/Makefile
@@ -10,3 +10,5 @@ obj-$(CONFIG_OMAP_OCP2SCP) += omap-ocp2scp.o
obj-$(CONFIG_OMAP_INTERCONNECT) += omap_l3_smx.o omap_l3_noc.o
# CCI cache coherent interconnect for ARM platforms
obj-$(CONFIG_ARM_CCI) += arm-cci.o
+
+obj-$(CONFIG_VEXPRESS_CONFIG) += vexpress-config.o
diff --git a/drivers/bus/vexpress-config.c b/drivers/bus/vexpress-config.c
new file mode 100644
index 0000000..27a07df
--- /dev/null
+++ b/drivers/bus/vexpress-config.c
@@ -0,0 +1,202 @@
+/*
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * Copyright (C) 2014 ARM Limited
+ */
+
+#include <linux/err.h>
+#include <linux/init.h>
+#include <linux/of.h>
+#include <linux/of_device.h>
+#include <linux/vexpress.h>
+
+
+struct vexpress_config_bridge {
+ struct vexpress_config_bridge_ops *ops;
+ void *context;
+};
+
+
+static DEFINE_MUTEX(vexpress_config_mutex);
+static struct class *vexpress_config_class;
+static u32 vexpress_config_site_master = VEXPRESS_SITE_MASTER;
+
+
+void vexpress_config_set_master(u32 site)
+{
+ vexpress_config_site_master = site;
+}
+
+u32 vexpress_config_get_master(void)
+{
+ return vexpress_config_site_master;
+}
+
+void vexpress_config_lock(void *arg)
+{
+ mutex_lock(&vexpress_config_mutex);
+}
+
+void vexpress_config_unlock(void *arg)
+{
+ mutex_unlock(&vexpress_config_mutex);
+}
+
+
+static void vexpress_config_find_prop(struct device_node *node,
+ const char *name, u32 *val)
+{
+ /* Default value */
+ *val = 0;
+
+ of_node_get(node);
+ while (node) {
+ if (of_property_read_u32(node, name, val) == 0) {
+ of_node_put(node);
+ return;
+ }
+ node = of_get_next_parent(node);
+ }
+}
+
+int vexpress_config_get_topo(struct device_node *node, u32 *site,
+ u32 *position, u32 *dcc)
+{
+ vexpress_config_find_prop(node, "arm,vexpress,site", site);
+ if (*site == VEXPRESS_SITE_MASTER)
+ *site = vexpress_config_site_master;
+ if (WARN_ON(vexpress_config_site_master == VEXPRESS_SITE_MASTER))
+ return -EINVAL;
+ vexpress_config_find_prop(node, "arm,vexpress,position", position);
+ vexpress_config_find_prop(node, "arm,vexpress,dcc", dcc);
+
+ return 0;
+}
+
+
+static void vexpress_config_devres_release(struct device *dev, void *res)
+{
+ struct vexpress_config_bridge *bridge = dev_get_drvdata(dev->parent);
+ struct regmap *regmap = res;
+
+ bridge->ops->regmap_exit(regmap, bridge->context);
+}
+
+struct regmap *devm_regmap_init_vexpress_config(struct device *dev)
+{
+ struct vexpress_config_bridge *bridge;
+ struct regmap *regmap;
+ struct regmap **res;
+
+ if (WARN_ON(dev->parent->class != vexpress_config_class))
+ return ERR_PTR(-ENODEV);
+
+ bridge = dev_get_drvdata(dev->parent);
+ if (WARN_ON(!bridge))
+ return ERR_PTR(-EINVAL);
+
+ res = devres_alloc(vexpress_config_devres_release, sizeof(*res),
+ GFP_KERNEL);
+ if (!res)
+ return ERR_PTR(-ENOMEM);
+
+ regmap = bridge->ops->regmap_init(dev, bridge->context);
+ if (IS_ERR(regmap)) {
+ devres_free(res);
+ return regmap;
+ }
+
+ *res = regmap;
+ devres_add(dev, res);
+
+ return regmap;
+}
+
+
+struct device *vexpress_config_bridge_register(struct device *parent,
+ struct vexpress_config_bridge_ops *ops, void *context)
+{
+ struct device *dev;
+ struct vexpress_config_bridge *bridge;
+
+ if (!vexpress_config_class) {
+ vexpress_config_class = class_create(THIS_MODULE,
+ "vexpress-config");
+ if (IS_ERR(vexpress_config_class))
+ return (void *)vexpress_config_class;
+ }
+
+ dev = device_create(vexpress_config_class, parent, 0,
+ NULL, "%s.bridge", dev_name(parent));
+
+ if (IS_ERR(dev))
+ return dev;
+
+ bridge = devm_kmalloc(dev, sizeof(*bridge), GFP_KERNEL);
+ if (!bridge) {
+ put_device(dev);
+ device_unregister(dev);
+ return ERR_PTR(-ENOMEM);
+ }
+ bridge->ops = ops;
+ bridge->context = context;
+
+ dev_set_drvdata(dev, bridge);
+
+ dev_dbg(parent, "Registered bridge '%s', parent node %p\n",
+ dev_name(dev), parent->of_node);
+
+ return dev;
+}
+
+
+static int vexpress_config_node_match(struct device *dev, const void *data)
+{
+ const struct device_node *node = data;
+
+ dev_dbg(dev, "Parent node %p, looking for %p\n",
+ dev->parent->of_node, node);
+
+ return dev->parent->of_node == node;
+}
+
+static int vexpress_config_populate(struct device_node *node)
+{
+ struct device_node *bridge;
+ struct device *parent;
+
+ bridge = of_parse_phandle(node, "arm,vexpress,config-bridge", 0);
+ if (!bridge)
+ return -EINVAL;
+
+ parent = class_find_device(vexpress_config_class, NULL, bridge,
+ vexpress_config_node_match);
+ if (WARN_ON(!parent))
+ return -ENODEV;
+
+ return of_platform_populate(node, NULL, NULL, parent);
+}
+
+static int __init vexpress_config_init(void)
+{
+ int err = 0;
+ struct device_node *node;
+
+ /* Need the config devices early, before the "normal" devices... */
+ for_each_compatible_node(node, NULL, "arm,vexpress,config-bus") {
+ err = vexpress_config_populate(node);
+ if (err)
+ break;
+ }
+
+ return err;
+}
+postcore_initcall(vexpress_config_init);
+
diff --git a/drivers/clk/versatile/clk-vexpress-osc.c b/drivers/clk/versatile/clk-vexpress-osc.c
index a535c7b..529a59c 100644
--- a/drivers/clk/versatile/clk-vexpress-osc.c
+++ b/drivers/clk/versatile/clk-vexpress-osc.c
@@ -11,8 +11,6 @@
* Copyright (C) 2012 ARM Limited
*/
-#define pr_fmt(fmt) "vexpress-osc: " fmt
-
#include <linux/clkdev.h>
#include <linux/clk-provider.h>
#include <linux/err.h>
@@ -22,7 +20,7 @@
#include <linux/vexpress.h>
struct vexpress_osc {
- struct vexpress_config_func *func;
+ struct regmap *reg;
struct clk_hw hw;
unsigned long rate_min;
unsigned long rate_max;
@@ -36,7 +34,7 @@ static unsigned long vexpress_osc_recalc_rate(struct clk_hw *hw,
struct vexpress_osc *osc = to_vexpress_osc(hw);
u32 rate;
- vexpress_config_read(osc->func, 0, &rate);
+ regmap_read(osc->reg, 0, &rate);
return rate;
}
@@ -60,7 +58,7 @@ static int vexpress_osc_set_rate(struct clk_hw *hw, unsigned long rate,
{
struct vexpress_osc *osc = to_vexpress_osc(hw);
- return vexpress_config_write(osc->func, 0, rate);
+ return regmap_write(osc->reg, 0, rate);
}
static struct clk_ops vexpress_osc_ops = {
@@ -70,56 +68,31 @@ static struct clk_ops vexpress_osc_ops = {
};
-struct clk * __init vexpress_osc_setup(struct device *dev)
-{
- struct clk_init_data init;
- struct vexpress_osc *osc = kzalloc(sizeof(*osc), GFP_KERNEL);
-
- if (!osc)
- return NULL;
-
- osc->func = vexpress_config_func_get_by_dev(dev);
- if (!osc->func) {
- kfree(osc);
- return NULL;
- }
-
- init.name = dev_name(dev);
- init.ops = &vexpress_osc_ops;
- init.flags = CLK_IS_ROOT;
- init.num_parents = 0;
- osc->hw.init = &init;
-
- return clk_register(NULL, &osc->hw);
-}
-
-void __init vexpress_osc_of_setup(struct device_node *node)
+static int vexpress_osc_probe(struct platform_device *pdev)
{
+ struct clk_lookup *cl = pdev->dev.platform_data; /* Non-DT lookup */
struct clk_init_data init;
struct vexpress_osc *osc;
struct clk *clk;
u32 range[2];
- osc = kzalloc(sizeof(*osc), GFP_KERNEL);
+ osc = devm_kzalloc(&pdev->dev, sizeof(*osc), GFP_KERNEL);
if (!osc)
- return;
+ return -ENOMEM;
- osc->func = vexpress_config_func_get_by_node(node);
- if (!osc->func) {
- pr_err("Failed to obtain config func for node '%s'!\n",
- node->full_name);
- goto error;
- }
+ osc->reg = devm_regmap_init_vexpress_config(&pdev->dev);
+ if (IS_ERR(osc->reg))
+ return PTR_ERR(osc->reg);
- if (of_property_read_u32_array(node, "freq-range", range,
+ if (of_property_read_u32_array(pdev->dev.of_node, "freq-range", range,
ARRAY_SIZE(range)) == 0) {
osc->rate_min = range[0];
osc->rate_max = range[1];
}
- of_property_read_string(node, "clock-output-names", &init.name);
- if (!init.name)
- init.name = node->full_name;
+ if (of_property_read_string(pdev->dev.of_node, "clock-output-names",
+ &init.name) != 0)
+ init.name = dev_name(&pdev->dev);
init.ops = &vexpress_osc_ops;
init.flags = CLK_IS_ROOT;
@@ -128,20 +101,37 @@ void __init vexpress_osc_of_setup(struct device_node *node)
osc->hw.init = &init;
clk = clk_register(NULL, &osc->hw);
- if (IS_ERR(clk)) {
- pr_err("Failed to register clock '%s'!\n", init.name);
- goto error;
+ if (IS_ERR(clk))
+ return PTR_ERR(clk);
+
+ of_clk_add_provider(pdev->dev.of_node, of_clk_src_simple_get, clk);
+
+ /* Only happens for non-DT cases */
+ if (cl) {
+ cl->clk = clk;
+ clkdev_add(cl);
}
- of_clk_add_provider(node, of_clk_src_simple_get, clk);
+ dev_dbg(&pdev->dev, "Registered clock '%s'\n", init.name);
- pr_debug("Registered clock '%s'\n", init.name);
+ return 0;
+}
- return;
+static struct of_device_id vexpress_osc_of_match[] = {
+ { .compatible = "arm,vexpress-osc", },
+ {}
+};
-error:
- if (osc->func)
- vexpress_config_func_put(osc->func);
- kfree(osc);
+static struct platform_driver vexpress_osc_driver = {
+ .driver = {
+ .name = "vexpress-osc",
+ .of_match_table = vexpress_osc_of_match,
+ },
+ .probe = vexpress_osc_probe,
+};
+
+static int __init vexpress_osc_init(void)
+{
+ return platform_driver_register(&vexpress_osc_driver);
}
-CLK_OF_DECLARE(vexpress_soc, "arm,vexpress-osc", vexpress_osc_of_setup);
+core_initcall(vexpress_osc_init);
diff --git a/drivers/hwmon/vexpress.c b/drivers/hwmon/vexpress.c
index 8242b75..d853332 100644
--- a/drivers/hwmon/vexpress.c
+++ b/drivers/hwmon/vexpress.c
@@ -26,7 +26,7 @@
struct vexpress_hwmon_data {
struct device *hwmon_dev;
- struct vexpress_config_func *func;
+ struct regmap *reg;
const char *name;
};
@@ -53,7 +53,7 @@ static ssize_t vexpress_hwmon_u32_show(struct device *dev,
int err;
u32 value;
- err = vexpress_config_read(data->func, 0, &value);
+ err = regmap_read(data->reg, 0, &value);
if (err)
return err;
@@ -68,11 +68,11 @@ static ssize_t vexpress_hwmon_u64_show(struct device *dev,
int err;
u32 value_hi, value_lo;
- err = vexpress_config_read(data->func, 0, &value_lo);
+ err = regmap_read(data->reg, 0, &value_lo);
if (err)
return err;
- err = vexpress_config_read(data->func, 1, &value_hi);
+ err = regmap_read(data->reg, 1, &value_hi);
if (err)
return err;
@@ -234,8 +234,8 @@ static int vexpress_hwmon_probe(struct platform_device *pdev)
type = match->data;
data->name = type->name;
- data->func = vexpress_config_func_get_by_dev(&pdev->dev);
- if (!data->func)
+ data->reg = devm_regmap_init_vexpress_config(&pdev->dev);
+ if (!data->reg)
return -ENODEV;
err = sysfs_create_groups(&pdev->dev.kobj, type->attr_groups);
@@ -252,7 +252,6 @@ static int vexpress_hwmon_probe(struct platform_device *pdev)
error:
sysfs_remove_group(&pdev->dev.kobj, match->data);
- vexpress_config_func_put(data->func);
return err;
}
@@ -266,8 +265,6 @@ static int vexpress_hwmon_remove(struct platform_device *pdev)
match = of_match_device(vexpress_hwmon_of_match, &pdev->dev);
sysfs_remove_group(&pdev->dev.kobj, match->data);
- vexpress_config_func_put(data->func);
-
return 0;
}
diff --git a/drivers/mfd/Makefile b/drivers/mfd/Makefile
index 2851275..9ba838e 100644
--- a/drivers/mfd/Makefile
+++ b/drivers/mfd/Makefile
@@ -161,7 +161,7 @@ obj-$(CONFIG_MFD_RC5T583) += rc5t583.o rc5t583-irq.o
obj-$(CONFIG_MFD_SEC_CORE) += sec-core.o sec-irq.o
obj-$(CONFIG_MFD_SYSCON) += syscon.o
obj-$(CONFIG_MFD_LM3533) += lm3533-core.o lm3533-ctrlbank.o
-obj-$(CONFIG_VEXPRESS_CONFIG) += vexpress-config.o vexpress-sysreg.o
+obj-$(CONFIG_VEXPRESS_CONFIG) += vexpress-sysreg.o
obj-$(CONFIG_MFD_RETU) += retu-mfd.o
obj-$(CONFIG_MFD_AS3711) += as3711.o
obj-$(CONFIG_MFD_AS3722) += as3722.o
diff --git a/drivers/mfd/vexpress-config.c b/drivers/mfd/vexpress-config.c
deleted file mode 100644
index d0db89d..0000000
--- a/drivers/mfd/vexpress-config.c
+++ /dev/null
@@ -1,287 +0,0 @@
-/*
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * Copyright (C) 2012 ARM Limited
- */
-
-#define pr_fmt(fmt) "vexpress-config: " fmt
-
-#include <linux/bitops.h>
-#include <linux/completion.h>
-#include <linux/export.h>
-#include <linux/list.h>
-#include <linux/of.h>
-#include <linux/of_device.h>
-#include <linux/slab.h>
-#include <linux/string.h>
-#include <linux/vexpress.h>
-
-
-#define VEXPRESS_CONFIG_MAX_BRIDGES 2
-
-static struct vexpress_config_bridge {
- struct device_node *node;
- struct vexpress_config_bridge_info *info;
- struct list_head transactions;
- spinlock_t transactions_lock;
-} vexpress_config_bridges[VEXPRESS_CONFIG_MAX_BRIDGES];
-
-static DECLARE_BITMAP(vexpress_config_bridges_map,
- ARRAY_SIZE(vexpress_config_bridges));
-static DEFINE_MUTEX(vexpress_config_bridges_mutex);
-
-struct vexpress_config_bridge *vexpress_config_bridge_register(
- struct device_node *node,
- struct vexpress_config_bridge_info *info)
-{
- struct vexpress_config_bridge *bridge;
- int i;
-
- pr_debug("Registering bridge '%s'\n", info->name);
-
- mutex_lock(&vexpress_config_bridges_mutex);
- i = find_first_zero_bit(vexpress_config_bridges_map,
- ARRAY_SIZE(vexpress_config_bridges));
- if (i >= ARRAY_SIZE(vexpress_config_bridges)) {
- pr_err("Can't register more bridges!\n");
- mutex_unlock(&vexpress_config_bridges_mutex);
- return NULL;
- }
- __set_bit(i, vexpress_config_bridges_map);
- bridge = &vexpress_config_bridges[i];
-
- bridge->node = node;
- bridge->info = info;
- INIT_LIST_HEAD(&bridge->transactions);
- spin_lock_init(&bridge->transactions_lock);
-
- mutex_unlock(&vexpress_config_bridges_mutex);
-
- return bridge;
-}
-EXPORT_SYMBOL(vexpress_config_bridge_register);
-
-void vexpress_config_bridge_unregister(struct vexpress_config_bridge *bridge)
-{
- struct vexpress_config_bridge __bridge = *bridge;
- int i;
-
- mutex_lock(&vexpress_config_bridges_mutex);
- for (i = 0; i < ARRAY_SIZE(vexpress_config_bridges); i++)
- if (&vexpress_config_bridges[i] == bridge)
- __clear_bit(i, vexpress_config_bridges_map);
- mutex_unlock(&vexpress_config_bridges_mutex);
-
- WARN_ON(!list_empty(&__bridge.transactions));
- while (!list_empty(&__bridge.transactions))
- cpu_relax();
-}
-EXPORT_SYMBOL(vexpress_config_bridge_unregister);
-
-
-struct vexpress_config_func {
- struct vexpress_config_bridge *bridge;
- void *func;
-};
-
-struct vexpress_config_func *__vexpress_config_func_get(struct device *dev,
- struct device_node *node)
-{
- struct device_node *bridge_node;
- struct vexpress_config_func *func;
- int i;
-
- if (WARN_ON(dev && node && dev->of_node != node))
- return NULL;
- if (dev && !node)
- node = dev->of_node;
-
- func = kzalloc(sizeof(*func), GFP_KERNEL);
- if (!func)
- return NULL;
-
- bridge_node = of_node_get(node);
- while (bridge_node) {
- const __be32 *prop = of_get_property(bridge_node,
- "arm,vexpress,config-bridge", NULL);
-
- if (prop) {
- bridge_node = of_find_node_by_phandle(
- be32_to_cpup(prop));
- break;
- }
-
- bridge_node = of_get_next_parent(bridge_node);
- }
-
- mutex_lock(&vexpress_config_bridges_mutex);
- for (i = 0; i < ARRAY_SIZE(vexpress_config_bridges); i++) {
- struct vexpress_config_bridge *bridge =
- &vexpress_config_bridges[i];
-
- if (test_bit(i, vexpress_config_bridges_map) &&
- bridge->node == bridge_node) {
- func->bridge = bridge;
- func->func = bridge->info->func_get(dev, node);
- break;
- }
- }
- mutex_unlock(&vexpress_config_bridges_mutex);
-
- if (!func->func) {
- of_node_put(node);
- kfree(func);
- return NULL;
- }
-
- return func;
-}
-EXPORT_SYMBOL(__vexpress_config_func_get);
-
-void vexpress_config_func_put(struct vexpress_config_func *func)
-{
- func->bridge->info->func_put(func->func);
- of_node_put(func->bridge->node);
- kfree(func);
-}
-EXPORT_SYMBOL(vexpress_config_func_put);
-
-struct vexpress_config_trans {
- struct vexpress_config_func *func;
- int offset;
- bool write;
- u32 *data;
- int status;
- struct completion completion;
- struct list_head list;
-};
-
-static void vexpress_config_dump_trans(const char *what,
- struct vexpress_config_trans *trans)
-{
- pr_debug("%s %s trans %p func 0x%p offset %d data 0x%x status %d\n",
- what, trans->write ? "write" : "read", trans,
- trans->func->func, trans->offset,
- trans->data ? *trans->data : 0, trans->status);
-}
-
-static int vexpress_config_schedule(struct vexpress_config_trans *trans)
-{
- int status;
- struct vexpress_config_bridge *bridge = trans->func->bridge;
- unsigned long flags;
-
- init_completion(&trans->completion);
- trans->status = -EFAULT;
-
- spin_lock_irqsave(&bridge->transactions_lock, flags);
-
- if (list_empty(&bridge->transactions)) {
- vexpress_config_dump_trans("Executing", trans);
- status = bridge->info->func_exec(trans->func->func,
- trans->offset, trans->write, trans->data);
- } else {
- vexpress_config_dump_trans("Queuing", trans);
- status = VEXPRESS_CONFIG_STATUS_WAIT;
- }
-
- switch (status) {
- case VEXPRESS_CONFIG_STATUS_DONE:
- vexpress_config_dump_trans("Finished", trans);
- trans->status = status;
- break;
- case VEXPRESS_CONFIG_STATUS_WAIT:
- list_add_tail(&trans->list, &bridge->transactions);
- break;
- }
-
- spin_unlock_irqrestore(&bridge->transactions_lock, flags);
-
- return status;
-}
-
-void vexpress_config_complete(struct vexpress_config_bridge *bridge,
- int status)
-{
- struct vexpress_config_trans *trans;
- unsigned long flags;
- const char *message = "Completed";
-
- spin_lock_irqsave(&bridge->transactions_lock, flags);
-
- trans = list_first_entry(&bridge->transactions,
- struct vexpress_config_trans, list);
- trans->status = status;
-
- do {
- vexpress_config_dump_trans(message, trans);
- list_del(&trans->list);
- complete(&trans->completion);
-
- if (list_empty(&bridge->transactions))
- break;
-
- trans = list_first_entry(&bridge->transactions,
- struct vexpress_config_trans, list);
- vexpress_config_dump_trans("Executing pending", trans);
- trans->status = bridge->info->func_exec(trans->func->func,
- trans->offset, trans->write, trans->data);
- message = "Finished pending";
- } while (trans->status == VEXPRESS_CONFIG_STATUS_DONE);
-
- spin_unlock_irqrestore(&bridge->transactions_lock, flags);
-}
-EXPORT_SYMBOL(vexpress_config_complete);
-
-int vexpress_config_wait(struct vexpress_config_trans *trans)
-{
- wait_for_completion(&trans->completion);
-
- return trans->status;
-}
-EXPORT_SYMBOL(vexpress_config_wait);
-
-int vexpress_config_read(struct vexpress_config_func *func, int offset,
- u32 *data)
-{
- struct vexpress_config_trans trans = {
- .func = func,
- .offset = offset,
- .write = false,
- .data = data,
- .status = 0,
- };
- int status = vexpress_config_schedule(&trans);
-
- if (status == VEXPRESS_CONFIG_STATUS_WAIT)
- status = vexpress_config_wait(&trans);
-
- return status;
-}
-EXPORT_SYMBOL(vexpress_config_read);
-
-int vexpress_config_write(struct vexpress_config_func *func, int offset,
- u32 data)
-{
- struct vexpress_config_trans trans = {
- .func = func,
- .offset = offset,
- .write = true,
- .data = &data,
- .status = 0,
- };
- int status = vexpress_config_schedule(&trans);
-
- if (status == VEXPRESS_CONFIG_STATUS_WAIT)
- status = vexpress_config_wait(&trans);
-
- return status;
-}
-EXPORT_SYMBOL(vexpress_config_write);
diff --git a/drivers/mfd/vexpress-sysreg.c b/drivers/mfd/vexpress-sysreg.c
index 35281e8..b4138a7 100644
--- a/drivers/mfd/vexpress-sysreg.c
+++ b/drivers/mfd/vexpress-sysreg.c
@@ -16,8 +16,10 @@
#include <linux/io.h>
#include <linux/leds.h>
#include <linux/of_address.h>
+#include <linux/of_platform.h>
#include <linux/platform_device.h>
#include <linux/regulator/driver.h>
+#include <linux/sched.h>
#include <linux/slab.h>
#include <linux/stat.h>
#include <linux/timer.h>
@@ -72,9 +74,18 @@
static void __iomem *vexpress_sysreg_base;
static struct device *vexpress_sysreg_dev;
-static int vexpress_master_site;
+static LIST_HEAD(vexpress_sysreg_config_funcs);
+static struct device *vexpress_sysreg_config_bridge;
+static int vexpress_sysreg_get_master(void)
+{
+ if (readl(vexpress_sysreg_base + SYS_MISC) & SYS_MISC_MASTERSITE)
+ return VEXPRESS_SITE_DB2;
+
+ return VEXPRESS_SITE_DB1;
+}
+
void vexpress_flags_set(u32 data)
{
writel(~0, vexpress_sysreg_base + SYS_FLAGSCLR);
@@ -84,7 +95,7 @@ void vexpress_flags_set(u32 data)
u32 vexpress_get_procid(int site)
{
if (site == VEXPRESS_SITE_MASTER)
- site = vexpress_master_site;
+ site = vexpress_sysreg_get_master();
return readl(vexpress_sysreg_base + (site == VEXPRESS_SITE_DB1 ?
SYS_PROCID0 : SYS_PROCID1));
@@ -114,130 +125,33 @@ void __iomem *vexpress_get_24mhz_clock_base(void)
}
-static void vexpress_sysreg_find_prop(struct device_node *node,
- const char *name, u32 *val)
-{
- of_node_get(node);
- while (node) {
- if (of_property_read_u32(node, name, val) == 0) {
- of_node_put(node);
- return;
- }
- node = of_get_next_parent(node);
- }
-}
-
-unsigned __vexpress_get_site(struct device *dev, struct device_node *node)
-{
- u32 site = 0;
-
- WARN_ON(dev && node && dev->of_node != node);
- if (dev && !node)
- node = dev->of_node;
-
- if (node) {
- vexpress_sysreg_find_prop(node, "arm,vexpress,site", &site);
- } else if (dev && dev->bus == &platform_bus_type) {
- struct platform_device *pdev = to_platform_device(dev);
-
- if (pdev->num_resources == 1 &&
- pdev->resource[0].flags == IORESOURCE_BUS)
- site = pdev->resource[0].start;
- } else if (dev && strncmp(dev_name(dev), "ct:", 3) == 0) {
- site = VEXPRESS_SITE_MASTER;
- }
-
- if (site == VEXPRESS_SITE_MASTER)
- site = vexpress_master_site;
-
- return site;
-}
-
-
struct vexpress_sysreg_config_func {
- u32 template;
- u32 device;
+ struct list_head list;
+ struct regmap *regmap;
+ int num_templates;
+ u32 template[0]; /* Keep this last */
};
-static struct vexpress_config_bridge *vexpress_sysreg_config_bridge;
-static struct timer_list vexpress_sysreg_config_timer;
-static u32 *vexpress_sysreg_config_data;
-static int vexpress_sysreg_config_tries;
-
-static void *vexpress_sysreg_config_func_get(struct device *dev,
- struct device_node *node)
+static int vexpress_sysreg_config_exec(struct vexpress_sysreg_config_func *func,
+ int index, bool write, u32 *data)
{
- struct vexpress_sysreg_config_func *config_func;
- u32 site = 0;
- u32 position = 0;
- u32 dcc = 0;
- u32 func_device[2];
- int err = -EFAULT;
-
- if (node) {
- of_node_get(node);
- vexpress_sysreg_find_prop(node, "arm,vexpress,site", &site);
- vexpress_sysreg_find_prop(node, "arm,vexpress,position",
- &position);
- vexpress_sysreg_find_prop(node, "arm,vexpress,dcc", &dcc);
- err = of_property_read_u32_array(node,
- "arm,vexpress-sysreg,func", func_device,
- ARRAY_SIZE(func_device));
- of_node_put(node);
- } else if (dev && dev->bus == &platform_bus_type) {
- struct platform_device *pdev = to_platform_device(dev);
-
- if (pdev->num_resources == 1 &&
- pdev->resource[0].flags == IORESOURCE_BUS) {
- site = pdev->resource[0].start;
- func_device[0] = pdev->resource[0].end;
- func_device[1] = pdev->id;
- err = 0;
- }
- }
- if (err)
- return NULL;
-
- config_func = kzalloc(sizeof(*config_func), GFP_KERNEL);
- if (!config_func)
- return NULL;
-
- config_func->template = SYS_CFGCTRL_DCC(dcc);
- config_func->template |= SYS_CFGCTRL_FUNC(func_device[0]);
- config_func->template |= SYS_CFGCTRL_SITE(site == VEXPRESS_SITE_MASTER ?
- vexpress_master_site : site);
- config_func->template |= SYS_CFGCTRL_POSITION(position);
- config_func->device |= func_device[1];
-
- dev_dbg(vexpress_sysreg_dev, "func 0x%p = 0x%x, %d\n", config_func,
- config_func->template, config_func->device);
-
- return config_func;
-}
-
-static void vexpress_sysreg_config_func_put(void *func)
-{
- kfree(func);
-}
-
-static int vexpress_sysreg_config_func_exec(void *func, int offset,
- bool write, u32 *data)
-{
- int status;
- struct vexpress_sysreg_config_func *config_func = func;
- u32 command;
+ u32 command, status;
+ int tries;
+ long timeout;
if (WARN_ON(!vexpress_sysreg_base))
return -ENOENT;
+ if (WARN_ON(index > func->num_templates))
+ return -EINVAL;
+
command = readl(vexpress_sysreg_base + SYS_CFGCTRL);
if (WARN_ON(command & SYS_CFGCTRL_START))
return -EBUSY;
- command = SYS_CFGCTRL_START;
+ command = func->template[index];
+ command |= SYS_CFGCTRL_START;
command |= write ? SYS_CFGCTRL_WRITE : 0;
- command |= config_func->template;
- command |= SYS_CFGCTRL_DEVICE(config_func->device + offset);
/* Use a canary for reads */
if (!write)
@@ -250,90 +164,190 @@ static int vexpress_sysreg_config_func_exec(void *func, int offset,
writel(command, vexpress_sysreg_base + SYS_CFGCTRL);
mb();
- if (vexpress_sysreg_dev) {
- /* Schedule completion check */
- if (!write)
- vexpress_sysreg_config_data = data;
- vexpress_sysreg_config_tries = 100;
- mod_timer(&vexpress_sysreg_config_timer,
- jiffies + usecs_to_jiffies(100));
- status = VEXPRESS_CONFIG_STATUS_WAIT;
- } else {
- /* Early execution, no timer available, have to spin */
- u32 cfgstat;
+ /* The operation can take ages... Go to sleep, 100us initially */
+ tries = 100;
+ timeout = 100;
+ do {
+ set_current_state(TASK_INTERRUPTIBLE);
+ schedule_timeout(usecs_to_jiffies(timeout));
+ if (signal_pending(current))
+ return -EINTR;
+
+ status = readl(vexpress_sysreg_base + SYS_CFGSTAT);
+ if (status & SYS_CFGSTAT_ERR)
+ return -EFAULT;
+
+ if (timeout > 20)
+ timeout -= 20;
+ } while (--tries && !(status & SYS_CFGSTAT_COMPLETE));
+ if (WARN_ON_ONCE(!tries))
+ return -ETIMEDOUT;
+
+ if (!write) {
+ *data = readl(vexpress_sysreg_base + SYS_CFGDATA);
+ dev_dbg(vexpress_sysreg_dev, "func %p, read data %x\n",
+ func, *data);
+ }
- do {
- cpu_relax();
- cfgstat = readl(vexpress_sysreg_base + SYS_CFGSTAT);
- } while (!cfgstat);
+ return 0;
+}
- if (!write && (cfgstat & SYS_CFGSTAT_COMPLETE))
- *data = readl(vexpress_sysreg_base + SYS_CFGDATA);
- status = VEXPRESS_CONFIG_STATUS_DONE;
+static int vexpress_sysreg_config_read(void *context, unsigned int index,
+ unsigned int *val)
+{
+ struct vexpress_sysreg_config_func *func = context;
- if (cfgstat & SYS_CFGSTAT_ERR)
- status = -EINVAL;
- }
+ return vexpress_sysreg_config_exec(func, index, false, val);
+}
- return status;
+static int vexpress_sysreg_config_write(void *context, unsigned int index,
+ unsigned int val)
+{
+ struct vexpress_sysreg_config_func *func = context;
+
+ return vexpress_sysreg_config_exec(func, index, true, &val);
}
-struct vexpress_config_bridge_info vexpress_sysreg_config_bridge_info = {
- .name = "vexpress-sysreg",
- .func_get = vexpress_sysreg_config_func_get,
- .func_put = vexpress_sysreg_config_func_put,
- .func_exec = vexpress_sysreg_config_func_exec,
+struct regmap_config vexpress_sysreg_regmap_config = {
+ .lock = vexpress_config_lock,
+ .unlock = vexpress_config_unlock,
+ .reg_bits = 32,
+ .val_bits = 32,
+ .reg_read = vexpress_sysreg_config_read,
+ .reg_write = vexpress_sysreg_config_write,
+ .reg_format_endian = REGMAP_ENDIAN_LITTLE,
+ .val_format_endian = REGMAP_ENDIAN_LITTLE,
};
-static void vexpress_sysreg_config_complete(unsigned long data)
+static struct regmap *vexpress_sysreg_config_regmap_init(struct device *dev,
+ void *context)
{
- int status = VEXPRESS_CONFIG_STATUS_DONE;
- u32 cfgstat = readl(vexpress_sysreg_base + SYS_CFGSTAT);
-
- if (cfgstat & SYS_CFGSTAT_ERR)
- status = -EINVAL;
- if (!vexpress_sysreg_config_tries--)
- status = -ETIMEDOUT;
-
- if (status < 0) {
- dev_err(vexpress_sysreg_dev, "error %d\n", status);
- } else if (!(cfgstat & SYS_CFGSTAT_COMPLETE)) {
- mod_timer(&vexpress_sysreg_config_timer,
- jiffies + usecs_to_jiffies(50));
- return;
+ struct platform_device *pdev = to_platform_device(dev);
+ struct vexpress_sysreg_config_func *func;
+ struct property *prop;
+ const __be32 *val = NULL;
+ __be32 energy_quirk[4];
+ int num;
+ u32 site, position, dcc;
+ int err;
+ int i;
+
+ if (dev->of_node) {
+ err = vexpress_config_get_topo(dev->of_node, &site, &position,
+ &dcc);
+ if (err)
+ return ERR_PTR(err);
+
+ prop = of_find_property(dev->of_node,
+ "arm,vexpress-sysreg,func", NULL);
+ if (!prop)
+ return ERR_PTR(-EINVAL);
+
+ num = prop->length / sizeof(u32) / 2;
+ val = prop->value;
+ } else {
+ if (pdev->num_resources != 1 ||
+ pdev->resource[0].flags != IORESOURCE_BUS)
+ return ERR_PTR(-EFAULT);
+
+ site = pdev->resource[0].start;
+ if (site == VEXPRESS_SITE_MASTER)
+ site = vexpress_sysreg_get_master();
+ position = 0;
+ dcc = 0;
+ num = 1;
}
- if (vexpress_sysreg_config_data) {
- *vexpress_sysreg_config_data = readl(vexpress_sysreg_base +
- SYS_CFGDATA);
- dev_dbg(vexpress_sysreg_dev, "read data %x\n",
- *vexpress_sysreg_config_data);
- vexpress_sysreg_config_data = NULL;
+ /*
+ * "arm,vexpress-energy" function used to be described
+ * by its first device only, now it requires both
+ */
+ if (num == 1 && of_device_is_compatible(dev->of_node,
+ "arm,vexpress-energy")) {
+ num = 2;
+ energy_quirk[0] = *val;
+ energy_quirk[2] = *val++;
+ energy_quirk[1] = *val;
+ energy_quirk[3] = cpu_to_be32(be32_to_cpup(val) + 1);
+ val = energy_quirk;
}
- vexpress_config_complete(vexpress_sysreg_config_bridge, status);
-}
+ func = kzalloc(sizeof(*func) + sizeof(*func->template) * num,
+ GFP_KERNEL);
+ if (!func)
+ return NULL;
+ func->num_templates = num;
-void vexpress_sysreg_setup(struct device_node *node)
-{
- if (WARN_ON(!vexpress_sysreg_base))
- return;
+ for (i = 0; i < num; i++) {
+ u32 function, device;
- if (readl(vexpress_sysreg_base + SYS_MISC) & SYS_MISC_MASTERSITE)
- vexpress_master_site = VEXPRESS_SITE_DB2;
+ if (dev->of_node) {
+ function = be32_to_cpup(val++);
+ device = be32_to_cpup(val++);
+ } else {
+ function = pdev->resource[0].end;
+ device = pdev->id;
+ }
+
+ dev_dbg(dev, "func %p: %u/%u/%u/%u/%u\n",
+ func, site, position, dcc,
+ function, device);
+
+ func->template[i] = SYS_CFGCTRL_DCC(dcc);
+ func->template[i] |= SYS_CFGCTRL_SITE(site);
+ func->template[i] |= SYS_CFGCTRL_POSITION(position);
+ func->template[i] |= SYS_CFGCTRL_FUNC(function);
+ func->template[i] |= SYS_CFGCTRL_DEVICE(device);
+ }
+
+ vexpress_sysreg_regmap_config.max_register = num - 1;
+
+ func->regmap = regmap_init(dev, NULL, func,
+ &vexpress_sysreg_regmap_config);
+
+ if (IS_ERR(func->regmap))
+ kfree(func);
else
- vexpress_master_site = VEXPRESS_SITE_DB1;
+ list_add(&func->list, &vexpress_sysreg_config_funcs);
- vexpress_sysreg_config_bridge = vexpress_config_bridge_register(
- node, &vexpress_sysreg_config_bridge_info);
- WARN_ON(!vexpress_sysreg_config_bridge);
+ return func->regmap;
+}
+
+static void vexpress_sysreg_config_regmap_exit(struct regmap *regmap,
+ void *context)
+{
+ struct vexpress_sysreg_config_func *func, *tmp;
+
+ regmap_exit(regmap);
+
+ list_for_each_entry_safe(func, tmp, &vexpress_sysreg_config_funcs,
+ list) {
+ if (func->regmap == regmap) {
+ list_del(&vexpress_sysreg_config_funcs);
+ kfree(func);
+ break;
+ }
+ }
+}
+
+static struct vexpress_config_bridge_ops vexpress_sysreg_config_bridge_ops = {
+ .regmap_init = vexpress_sysreg_config_regmap_init,
+ .regmap_exit = vexpress_sysreg_config_regmap_exit,
+};
+
+int vexpress_sysreg_config_device_register(struct platform_device *pdev)
+{
+ pdev->dev.parent = vexpress_sysreg_config_bridge;
+
+ return platform_device_register(pdev);
}
+
void __init vexpress_sysreg_early_init(void __iomem *base)
{
vexpress_sysreg_base = base;
- vexpress_sysreg_setup(NULL);
+ vexpress_config_set_master(vexpress_sysreg_get_master());
}
void __init vexpress_sysreg_of_early_init(void)
@@ -344,10 +358,14 @@ void __init vexpress_sysreg_of_early_init(void)
return;
node = of_find_compatible_node(NULL, NULL, "arm,vexpress-sysreg");
- if (node) {
- vexpress_sysreg_base = of_iomap(node, 0);
- vexpress_sysreg_setup(node);
- }
+ if (WARN_ON(!node))
+ return;
+
+ vexpress_sysreg_base = of_iomap(node, 0);
+ if (WARN_ON(!vexpress_sysreg_base))
+ return;
+
+ vexpress_config_set_master(vexpress_sysreg_get_master());
}
@@ -470,28 +488,22 @@ static int vexpress_sysreg_probe(struct platform_device *pdev)
return -EBUSY;
}
- if (!vexpress_sysreg_base) {
+ if (!vexpress_sysreg_base)
vexpress_sysreg_base = devm_ioremap(&pdev->dev, res->start,
resource_size(res));
- vexpress_sysreg_setup(pdev->dev.of_node);
- }
if (!vexpress_sysreg_base) {
dev_err(&pdev->dev, "Failed to obtain base address!\n");
return -EFAULT;
}
- setup_timer(&vexpress_sysreg_config_timer,
- vexpress_sysreg_config_complete, 0);
-
+ vexpress_config_set_master(vexpress_sysreg_get_master());
vexpress_sysreg_dev = &pdev->dev;
#ifdef CONFIG_GPIOLIB
vexpress_sysreg_gpio_chip.dev = &pdev->dev;
err = gpiochip_add(&vexpress_sysreg_gpio_chip);
if (err) {
- vexpress_config_bridge_unregister(
- vexpress_sysreg_config_bridge);
dev_err(&pdev->dev, "Failed to register GPIO chip! (%d)\n",
err);
return err;
@@ -502,6 +514,10 @@ static int vexpress_sysreg_probe(struct platform_device *pdev)
sizeof(vexpress_sysreg_leds_pdata));
#endif
+ vexpress_sysreg_config_bridge = vexpress_config_bridge_register(
+ &pdev->dev, &vexpress_sysreg_config_bridge_ops, NULL);
+ WARN_ON(!vexpress_sysreg_config_bridge);
+
device_create_file(vexpress_sysreg_dev, &dev_attr_sys_id);
return 0;
@@ -522,7 +538,12 @@ static struct platform_driver vexpress_sysreg_driver = {
static int __init vexpress_sysreg_init(void)
{
- vexpress_sysreg_of_early_init();
+ struct device_node *node;
+
+ /* Need the sysreg early, before any other device... */
+ for_each_matching_node(node, vexpress_sysreg_match)
+ of_platform_device_create(node, NULL, NULL);
+
return platform_driver_register(&vexpress_sysreg_driver);
}
core_initcall(vexpress_sysreg_init);
diff --git a/drivers/power/reset/vexpress-poweroff.c b/drivers/power/reset/vexpress-poweroff.c
index b95cf71..4dc102e2 100644
--- a/drivers/power/reset/vexpress-poweroff.c
+++ b/drivers/power/reset/vexpress-poweroff.c
@@ -23,10 +23,10 @@
static void vexpress_reset_do(struct device *dev, const char *what)
{
int err = -ENOENT;
- struct vexpress_config_func *func = dev_get_drvdata(dev);
+ struct regmap *reg = dev_get_drvdata(dev);
- if (func) {
- err = vexpress_config_write(func, 0, 0);
+ if (reg) {
+ err = regmap_write(reg, 0, 0);
if (!err)
mdelay(1000);
}
@@ -91,17 +91,17 @@ static int vexpress_reset_probe(struct platform_device *pdev)
enum vexpress_reset_func func;
const struct of_device_id *match =
of_match_device(vexpress_reset_of_match, &pdev->dev);
- struct vexpress_config_func *config_func;
+ struct regmap *regmap;
if (match)
func = (enum vexpress_reset_func)match->data;
else
func = pdev->id_entry->driver_data;
- config_func = vexpress_config_func_get_by_dev(&pdev->dev);
- if (!config_func)
- return -EINVAL;
- dev_set_drvdata(&pdev->dev, config_func);
+ regmap = devm_regmap_init_vexpress_config(&pdev->dev);
+ if (IS_ERR(regmap))
+ return PTR_ERR(regmap);
+ dev_set_drvdata(&pdev->dev, regmap);
switch (func) {
case FUNC_SHUTDOWN:
diff --git a/drivers/regulator/vexpress.c b/drivers/regulator/vexpress.c
index f3ae28a..2863428 100644
--- a/drivers/regulator/vexpress.c
+++ b/drivers/regulator/vexpress.c
@@ -26,14 +26,14 @@
struct vexpress_regulator {
struct regulator_desc desc;
struct regulator_dev *regdev;
- struct vexpress_config_func *func;
+ struct regmap *regmap;
};
static int vexpress_regulator_get_voltage(struct regulator_dev *regdev)
{
struct vexpress_regulator *reg = rdev_get_drvdata(regdev);
u32 uV;
- int err = vexpress_config_read(reg->func, 0, &uV);
+ int err = regmap_read(reg->regmap, 0, &uV);
return err ? err : uV;
}
@@ -43,7 +43,7 @@ static int vexpress_regulator_set_voltage(struct regulator_dev *regdev,
{
struct vexpress_regulator *reg = rdev_get_drvdata(regdev);
- return vexpress_config_write(reg->func, 0, min_uV);
+ return regmap_write(reg->regmap, 0, min_uV);
}
static struct regulator_ops vexpress_regulator_ops_ro = {
@@ -57,22 +57,17 @@ static struct regulator_ops vexpress_regulator_ops = {
static int vexpress_regulator_probe(struct platform_device *pdev)
{
- int err;
struct vexpress_regulator *reg;
struct regulator_init_data *init_data;
struct regulator_config config = { };
reg = devm_kzalloc(&pdev->dev, sizeof(*reg), GFP_KERNEL);
- if (!reg) {
- err = -ENOMEM;
- goto error_kzalloc;
- }
+ if (!reg)
+ return -ENOMEM;
- reg->func = vexpress_config_func_get_by_dev(&pdev->dev);
- if (!reg->func) {
- err = -ENXIO;
- goto error_get_func;
- }
+ reg->regmap = devm_regmap_init_vexpress_config(&pdev->dev);
+ if (IS_ERR(reg->regmap))
+ return PTR_ERR(reg->regmap);
reg->desc.name = dev_name(&pdev->dev);
reg->desc.type = REGULATOR_VOLTAGE;
@@ -80,10 +75,8 @@ static int vexpress_regulator_probe(struct platform_device *pdev)
reg->desc.continuous_voltage_range = true;
init_data = of_get_regulator_init_data(&pdev->dev, pdev->dev.of_node);
- if (!init_data) {
- err = -EINVAL;
- goto error_get_regulator_init_data;
- }
+ if (!init_data)
+ return -EINVAL;
init_data->constraints.apply_uV = 0;
if (init_data->constraints.min_uV && init_data->constraints.max_uV)
@@ -97,30 +90,12 @@ static int vexpress_regulator_probe(struct platform_device *pdev)
config.of_node = pdev->dev.of_node;
reg->regdev = devm_regulator_register(&pdev->dev, ®->desc, &config);
- if (IS_ERR(reg->regdev)) {
- err = PTR_ERR(reg->regdev);
- goto error_regulator_register;
- }
+ if (IS_ERR(reg->regdev))
+ return PTR_ERR(reg->regdev);
platform_set_drvdata(pdev, reg);
return 0;
-
-error_regulator_register:
-error_get_regulator_init_data:
- vexpress_config_func_put(reg->func);
-error_get_func:
-error_kzalloc:
- return err;
-}
-
-static int vexpress_regulator_remove(struct platform_device *pdev)
-{
- struct vexpress_regulator *reg = platform_get_drvdata(pdev);
-
- vexpress_config_func_put(reg->func);
-
- return 0;
}
static struct of_device_id vexpress_regulator_of_match[] = {
@@ -130,7 +105,6 @@ static struct of_device_id vexpress_regulator_of_match[] = {
static struct platform_driver vexpress_regulator_driver = {
.probe = vexpress_regulator_probe,
- .remove = vexpress_regulator_remove,
.driver = {
.name = DRVNAME,
.owner = THIS_MODULE,
diff --git a/include/linux/vexpress.h b/include/linux/vexpress.h
index 617c01b..6b206ba 100644
--- a/include/linux/vexpress.h
+++ b/include/linux/vexpress.h
@@ -15,16 +15,15 @@
#define _LINUX_VEXPRESS_H
#include <linux/device.h>
+#include <linux/platform_device.h>
#include <linux/reboot.h>
+#include <linux/regmap.h>
#define VEXPRESS_SITE_MB 0
#define VEXPRESS_SITE_DB1 1
#define VEXPRESS_SITE_DB2 2
#define VEXPRESS_SITE_MASTER 0xf
-#define VEXPRESS_CONFIG_STATUS_DONE 0
-#define VEXPRESS_CONFIG_STATUS_WAIT 1
-
#define VEXPRESS_GPIO_MMC_CARDIN 0
#define VEXPRESS_GPIO_MMC_WPROT 1
#define VEXPRESS_GPIO_FLASH_WPn 2
@@ -44,63 +43,30 @@
.flags = IORESOURCE_BUS, \
}
-/* Config bridge API */
+/* Config infrastructure */
-/**
- * struct vexpress_config_bridge_info - description of the platform
- * configuration infrastructure bridge.
- *
- * @name: Bridge name
- *
- * @func_get: Obtains pointer to a configuration function for a given
- * device or a Device Tree node, to be used with @func_put
- * and @func_exec. The node pointer should take precedence
- * over device pointer when both are passed.
- *
- * @func_put: Tells the bridge that the function will not be used any
- * more, so all allocated resources can be released.
- *
- * @func_exec: Executes a configuration function read or write operation.
- * The offset selects a 32 bit word of the value accessed.
- * Must return VEXPRESS_CONFIG_STATUS_DONE when operation
- * is finished immediately, VEXPRESS_CONFIG_STATUS_WAIT when
- * will be completed in some time or negative value in case
- * of error.
- */
-struct vexpress_config_bridge_info {
- const char *name;
- void *(*func_get)(struct device *dev, struct device_node *node);
- void (*func_put)(void *func);
- int (*func_exec)(void *func, int offset, bool write, u32 *data);
-};
+void vexpress_config_set_master(u32 site);
+u32 vexpress_config_get_master(void);
-struct vexpress_config_bridge;
+void vexpress_config_lock(void *arg);
+void vexpress_config_unlock(void *arg);
-struct vexpress_config_bridge *vexpress_config_bridge_register(
- struct device_node *node,
- struct vexpress_config_bridge_info *info);
-void vexpress_config_bridge_unregister(struct vexpress_config_bridge *bridge);
+int vexpress_config_get_topo(struct device_node *node, u32 *site,
+ u32 *position, u32 *dcc);
-void vexpress_config_complete(struct vexpress_config_bridge *bridge,
- int status);
+/* Config bridge API */
-/* Config function API */
+struct vexpress_config_bridge_ops {
+ struct regmap * (*regmap_init)(struct device *dev, void *context);
+ void (*regmap_exit)(struct regmap *regmap, void *context);
+};
-struct vexpress_config_func;
+struct device *vexpress_config_bridge_register(struct device *parent,
+ struct vexpress_config_bridge_ops *ops, void *context);
-struct vexpress_config_func *__vexpress_config_func_get(struct device *dev,
- struct device_node *node);
-#define vexpress_config_func_get_by_dev(dev) \
- __vexpress_config_func_get(dev, NULL)
-#define vexpress_config_func_get_by_node(node) \
- __vexpress_config_func_get(NULL, node)
-void vexpress_config_func_put(struct vexpress_config_func *func);
+/* Config regmap API */
-/* Both may sleep! */
-int vexpress_config_read(struct vexpress_config_func *func, int offset,
- u32 *data);
-int vexpress_config_write(struct vexpress_config_func *func, int offset,
- u32 data);
+struct regmap *devm_regmap_init_vexpress_config(struct device *dev);
/* Platform control */
@@ -109,19 +75,12 @@ u32 vexpress_get_hbi(int site);
void *vexpress_get_24mhz_clock_base(void);
void vexpress_flags_set(u32 data);
-#define vexpress_get_site_by_node(node) __vexpress_get_site(NULL, node)
-#define vexpress_get_site_by_dev(dev) __vexpress_get_site(dev, NULL)
-unsigned __vexpress_get_site(struct device *dev, struct device_node *node);
-
void vexpress_sysreg_early_init(void __iomem *base);
void vexpress_sysreg_of_early_init(void);
+int vexpress_sysreg_config_device_register(struct platform_device *pdev);
/* Clocks */
-struct clk *vexpress_osc_setup(struct device *dev);
-void vexpress_osc_of_setup(struct device_node *node);
-
void vexpress_clk_init(void __iomem *sp810_base);
-void vexpress_clk_of_init(void);
#endif
--
1.9.1
This patch - finally, after over 6 months! :-( - addresses
Samuel's request to split the vexpress-sysreg driver into
smaller portions and define the device in a form of MFD
cells:
* LEDs code has been completely removed and replaced with
"gpio-leds" nodes in the tree (referencing dedicated
GPIO subnodes in sysreg - bindings documentation updated);
this also better fits the reality as some variants of the
motherboard don't have all the LEDs populated
* syscfg bridge code has been extracted into a separate
driver (placed in drivers/misc for no better place)
* all the ID & MISC registers are defined as sysconf
making them available for other drivers should they need
to use them (and also to the user via /sys/kernel/debug/regmap
which can be helpful in platform debugging)
Signed-off-by: Pawel Moll <[email protected]>
---
.../devicetree/bindings/arm/vexpress-sysreg.txt | 36 +-
arch/arm/boot/dts/vexpress-v2m-rs1.dtsi | 76 ++-
arch/arm/boot/dts/vexpress-v2m.dtsi | 76 ++-
arch/arm/mach-vexpress/ct-ca9x4.c | 2 +-
arch/arm/mach-vexpress/v2m.c | 15 +-
drivers/mfd/Kconfig | 15 +-
drivers/mfd/Makefile | 2 +-
drivers/mfd/vexpress-sysreg.c | 533 ++++++---------------
drivers/misc/Kconfig | 9 +
drivers/misc/Makefile | 1 +
drivers/misc/vexpress-syscfg.c | 324 +++++++++++++
include/linux/vexpress.h | 16 +-
12 files changed, 667 insertions(+), 438 deletions(-)
create mode 100644 drivers/misc/vexpress-syscfg.c
diff --git a/Documentation/devicetree/bindings/arm/vexpress-sysreg.txt b/Documentation/devicetree/bindings/arm/vexpress-sysreg.txt
index 57b423f..00318d0 100644
--- a/Documentation/devicetree/bindings/arm/vexpress-sysreg.txt
+++ b/Documentation/devicetree/bindings/arm/vexpress-sysreg.txt
@@ -8,6 +8,8 @@ interrupt generation, MMC and NOR Flash control etc.
Required node properties:
- compatible value : = "arm,vexpress,sysreg";
- reg : physical base address and the size of the registers window
+
+Deprecated properties, replaced by GPIO subnodes (see below):
- gpio-controller : specifies that the node is a GPIO controller
- #gpio-cells : size of the GPIO specifier, should be 2:
- first cell is the pseudo-GPIO line number:
@@ -16,12 +18,42 @@ Required node properties:
2 - NOR FLASH WPn
- second cell can take standard GPIO flags (currently ignored).
+Control registers providing pseudo-GPIO lines must be represented
+by subnodes, each of them requiring the following properties:
+- compatible value : one of
+ "arm,vexpress-sysreg,sys_led"
+ "arm,vexpress-sysreg,sys_mci"
+ "arm,vexpress-sysreg,sys_flash"
+- gpio-controller : makes the node a GPIO controller
+- #gpio-cells : size of the GPIO specifier, must be 2:
+ - first cell is the function number:
+ - for sys_led : 0..7 = LED 0..7
+ - for sys_mci : 0 = MMC CARDIN, 1 = MMC WPROT
+ - for sys_flash : 0 = NOR FLASH WPn
+ - second cell can take standard GPIO flags (currently ignored).
+
Example:
v2m_sysreg: sysreg@10000000 {
compatible = "arm,vexpress-sysreg";
reg = <0x10000000 0x1000>;
- gpio-controller;
- #gpio-cells = <2>;
+
+ v2m_led_gpios: sys_led@08 {
+ compatible = "arm,vexpress-sysreg,sys_led";
+ gpio-controller;
+ #gpio-cells = <2>;
+ };
+
+ v2m_mmc_gpios: sys_mci@48 {
+ compatible = "arm,vexpress-sysreg,sys_mci";
+ gpio-controller;
+ #gpio-cells = <2>;
+ };
+
+ v2m_flash_gpios: sys_flash@4c {
+ compatible = "arm,vexpress-sysreg,sys_flash";
+ gpio-controller;
+ #gpio-cells = <2>;
+ };
};
This block also can also act a bridge to the platform's configuration
diff --git a/arch/arm/boot/dts/vexpress-v2m-rs1.dtsi b/arch/arm/boot/dts/vexpress-v2m-rs1.dtsi
index ac870fb..756c986 100644
--- a/arch/arm/boot/dts/vexpress-v2m-rs1.dtsi
+++ b/arch/arm/boot/dts/vexpress-v2m-rs1.dtsi
@@ -74,8 +74,24 @@
v2m_sysreg: sysreg@010000 {
compatible = "arm,vexpress-sysreg";
reg = <0x010000 0x1000>;
- gpio-controller;
- #gpio-cells = <2>;
+
+ v2m_led_gpios: sys_led@08 {
+ compatible = "arm,vexpress-sysreg,sys_led";
+ gpio-controller;
+ #gpio-cells = <2>;
+ };
+
+ v2m_mmc_gpios: sys_mci@48 {
+ compatible = "arm,vexpress-sysreg,sys_mci";
+ gpio-controller;
+ #gpio-cells = <2>;
+ };
+
+ v2m_flash_gpios: sys_flash@4c {
+ compatible = "arm,vexpress-sysreg,sys_flash";
+ gpio-controller;
+ #gpio-cells = <2>;
+ };
};
v2m_sysctl: sysctl@020000 {
@@ -113,8 +129,8 @@
compatible = "arm,pl180", "arm,primecell";
reg = <0x050000 0x1000>;
interrupts = <9 10>;
- cd-gpios = <&v2m_sysreg 0 0>;
- wp-gpios = <&v2m_sysreg 1 0>;
+ cd-gpios = <&v2m_mmc_gpios 0 0>;
+ wp-gpios = <&v2m_mmc_gpios 1 0>;
max-frequency = <12000000>;
vmmc-supply = <&v2m_fixed_3v3>;
clocks = <&v2m_clk24mhz>, <&smbclk>;
@@ -265,6 +281,58 @@
clock-output-names = "v2m:refclk32khz";
};
+ leds {
+ compatible = "gpio-leds";
+
+ user@1 {
+ label = "v2m:green:user1";
+ gpios = <&v2m_led_gpios 0 0>;
+ linux,default-trigger = "heartbeat";
+ };
+
+ user@2 {
+ label = "v2m:green:user2";
+ gpios = <&v2m_led_gpios 1 0>;
+ linux,default-trigger = "mmc0";
+ };
+
+ user@3 {
+ label = "v2m:green:user3";
+ gpios = <&v2m_led_gpios 2 0>;
+ linux,default-trigger = "cpu0";
+ };
+
+ user@4 {
+ label = "v2m:green:user4";
+ gpios = <&v2m_led_gpios 3 0>;
+ linux,default-trigger = "cpu1";
+ };
+
+ user@5 {
+ label = "v2m:green:user5";
+ gpios = <&v2m_led_gpios 4 0>;
+ linux,default-trigger = "cpu2";
+ };
+
+ user@6 {
+ label = "v2m:green:user6";
+ gpios = <&v2m_led_gpios 5 0>;
+ linux,default-trigger = "cpu3";
+ };
+
+ user@7 {
+ label = "v2m:green:user7";
+ gpios = <&v2m_led_gpios 6 0>;
+ linux,default-trigger = "cpu4";
+ };
+
+ user@8 {
+ label = "v2m:green:user8";
+ gpios = <&v2m_led_gpios 7 0>;
+ linux,default-trigger = "cpu5";
+ };
+ };
+
mcc {
compatible = "arm,vexpress,config-bus";
arm,vexpress,config-bridge = <&v2m_sysreg>;
diff --git a/arch/arm/boot/dts/vexpress-v2m.dtsi b/arch/arm/boot/dts/vexpress-v2m.dtsi
index f142036..ba856d6 100644
--- a/arch/arm/boot/dts/vexpress-v2m.dtsi
+++ b/arch/arm/boot/dts/vexpress-v2m.dtsi
@@ -73,8 +73,24 @@
v2m_sysreg: sysreg@00000 {
compatible = "arm,vexpress-sysreg";
reg = <0x00000 0x1000>;
- gpio-controller;
- #gpio-cells = <2>;
+
+ v2m_led_gpios: sys_led@08 {
+ compatible = "arm,vexpress-sysreg,sys_led";
+ gpio-controller;
+ #gpio-cells = <2>;
+ };
+
+ v2m_mmc_gpios: sys_mci@48 {
+ compatible = "arm,vexpress-sysreg,sys_mci";
+ gpio-controller;
+ #gpio-cells = <2>;
+ };
+
+ v2m_flash_gpios: sys_flash@4c {
+ compatible = "arm,vexpress-sysreg,sys_flash";
+ gpio-controller;
+ #gpio-cells = <2>;
+ };
};
v2m_sysctl: sysctl@01000 {
@@ -112,8 +128,8 @@
compatible = "arm,pl180", "arm,primecell";
reg = <0x05000 0x1000>;
interrupts = <9 10>;
- cd-gpios = <&v2m_sysreg 0 0>;
- wp-gpios = <&v2m_sysreg 1 0>;
+ cd-gpios = <&v2m_mmc_gpios 0 0>;
+ wp-gpios = <&v2m_mmc_gpios 1 0>;
max-frequency = <12000000>;
vmmc-supply = <&v2m_fixed_3v3>;
clocks = <&v2m_clk24mhz>, <&smbclk>;
@@ -264,6 +280,58 @@
clock-output-names = "v2m:refclk32khz";
};
+ leds {
+ compatible = "gpio-leds";
+
+ user@1 {
+ label = "v2m:green:user1";
+ gpios = <&v2m_led_gpios 0 0>;
+ linux,default-trigger = "heartbeat";
+ };
+
+ user@2 {
+ label = "v2m:green:user2";
+ gpios = <&v2m_led_gpios 1 0>;
+ linux,default-trigger = "mmc0";
+ };
+
+ user@3 {
+ label = "v2m:green:user3";
+ gpios = <&v2m_led_gpios 2 0>;
+ linux,default-trigger = "cpu0";
+ };
+
+ user@4 {
+ label = "v2m:green:user4";
+ gpios = <&v2m_led_gpios 3 0>;
+ linux,default-trigger = "cpu1";
+ };
+
+ user@5 {
+ label = "v2m:green:user5";
+ gpios = <&v2m_led_gpios 4 0>;
+ linux,default-trigger = "cpu2";
+ };
+
+ user@6 {
+ label = "v2m:green:user6";
+ gpios = <&v2m_led_gpios 5 0>;
+ linux,default-trigger = "cpu3";
+ };
+
+ user@7 {
+ label = "v2m:green:user7";
+ gpios = <&v2m_led_gpios 6 0>;
+ linux,default-trigger = "cpu4";
+ };
+
+ user@8 {
+ label = "v2m:green:user8";
+ gpios = <&v2m_led_gpios 7 0>;
+ linux,default-trigger = "cpu5";
+ };
+ };
+
mcc {
compatible = "arm,vexpress,config-bus";
arm,vexpress,config-bridge = <&v2m_sysreg>;
diff --git a/arch/arm/mach-vexpress/ct-ca9x4.c b/arch/arm/mach-vexpress/ct-ca9x4.c
index 35e394a..494d70b 100644
--- a/arch/arm/mach-vexpress/ct-ca9x4.c
+++ b/arch/arm/mach-vexpress/ct-ca9x4.c
@@ -160,7 +160,7 @@ static void __init ct_ca9x4_init(void)
amba_device_register(ct_ca9x4_amba_devs[i], &iomem_resource);
platform_device_register(&pmu_device);
- vexpress_sysreg_config_device_register(&osc1_device);
+ vexpress_syscfg_device_register(&osc1_device);
}
#ifdef CONFIG_SMP
diff --git a/arch/arm/mach-vexpress/v2m.c b/arch/arm/mach-vexpress/v2m.c
index ac95220..90f04c9 100644
--- a/arch/arm/mach-vexpress/v2m.c
+++ b/arch/arm/mach-vexpress/v2m.c
@@ -201,8 +201,9 @@ static struct platform_device v2m_cf_device = {
static struct mmci_platform_data v2m_mmci_data = {
.ocr_mask = MMC_VDD_32_33|MMC_VDD_33_34,
- .gpio_wp = VEXPRESS_GPIO_MMC_WPROT,
- .gpio_cd = VEXPRESS_GPIO_MMC_CARDIN,
+ .status = vexpress_get_mci_cardin,
+ .gpio_cd = -1,
+ .gpio_wp = -1,
};
static struct resource v2m_sysreg_resources[] = {
@@ -351,10 +352,10 @@ static void __init v2m_init(void)
for (i = 0; i < ARRAY_SIZE(v2m_amba_devs); i++)
amba_device_register(v2m_amba_devs[i], &iomem_resource);
- vexpress_sysreg_config_device_register(&v2m_muxfpga_device);
- vexpress_sysreg_config_device_register(&v2m_shutdown_device);
- vexpress_sysreg_config_device_register(&v2m_reboot_device);
- vexpress_sysreg_config_device_register(&v2m_dvimode_device);
+ vexpress_syscfg_device_register(&v2m_muxfpga_device);
+ vexpress_syscfg_device_register(&v2m_shutdown_device);
+ vexpress_syscfg_device_register(&v2m_reboot_device);
+ vexpress_syscfg_device_register(&v2m_dvimode_device);
ct_desc->init_tile();
}
@@ -409,8 +410,6 @@ void __init v2m_dt_init_early(void)
{
u32 dt_hbi;
- vexpress_sysreg_of_early_init();
-
/* Confirm board type against DT property, if available */
if (of_property_read_u32(of_allnodes, "arm,hbi", &dt_hbi) == 0) {
u32 hbi = vexpress_get_hbi(VEXPRESS_SITE_MASTER);
diff --git a/drivers/mfd/Kconfig b/drivers/mfd/Kconfig
index 3383412..490fd48 100644
--- a/drivers/mfd/Kconfig
+++ b/drivers/mfd/Kconfig
@@ -1227,12 +1227,17 @@ config MCP_UCB1200_TS
endmenu
-config VEXPRESS_CONFIG
- bool "ARM Versatile Express platform infrastructure"
- depends on ARM || ARM64
+config MFD_VEXPRESS_SYSREG
+ bool "Versatile Express System Registers"
+ depends on VEXPRESS_CONFIG
+ default y
+ select CLKSRC_MMIO
+ select GPIO_GENERIC_PLATFORM
+ select MFD_CORE
+ select MFD_SYSCON
help
- Platform configuration infrastructure for the ARM Ltd.
- Versatile Express.
+ System Registers are the platform configuration block
+ on the ARM Ltd. Versatile Express board.
endmenu
endif
diff --git a/drivers/mfd/Makefile b/drivers/mfd/Makefile
index 9ba838e..cec3487 100644
--- a/drivers/mfd/Makefile
+++ b/drivers/mfd/Makefile
@@ -161,7 +161,7 @@ obj-$(CONFIG_MFD_RC5T583) += rc5t583.o rc5t583-irq.o
obj-$(CONFIG_MFD_SEC_CORE) += sec-core.o sec-irq.o
obj-$(CONFIG_MFD_SYSCON) += syscon.o
obj-$(CONFIG_MFD_LM3533) += lm3533-core.o lm3533-ctrlbank.o
-obj-$(CONFIG_VEXPRESS_CONFIG) += vexpress-sysreg.o
+obj-$(CONFIG_MFD_VEXPRESS_SYSREG) += vexpress-sysreg.o
obj-$(CONFIG_MFD_RETU) += retu-mfd.o
obj-$(CONFIG_MFD_AS3711) += as3711.o
obj-$(CONFIG_MFD_AS3722) += as3722.o
diff --git a/drivers/mfd/vexpress-sysreg.c b/drivers/mfd/vexpress-sysreg.c
index b4138a7..952df84 100644
--- a/drivers/mfd/vexpress-sysreg.c
+++ b/drivers/mfd/vexpress-sysreg.c
@@ -11,25 +11,22 @@
* Copyright (C) 2012 ARM Limited
*/
+#include <linux/basic_mmio_gpio.h>
#include <linux/err.h>
-#include <linux/gpio.h>
#include <linux/io.h>
-#include <linux/leds.h>
+#include <linux/mfd/core.h>
#include <linux/of_address.h>
#include <linux/of_platform.h>
+#include <linux/platform_data/syscon.h>
#include <linux/platform_device.h>
-#include <linux/regulator/driver.h>
-#include <linux/sched.h>
#include <linux/slab.h>
#include <linux/stat.h>
-#include <linux/timer.h>
#include <linux/vexpress.h>
#define SYS_ID 0x000
#define SYS_SW 0x004
#define SYS_LED 0x008
#define SYS_100HZ 0x024
-#define SYS_FLAGS 0x030
#define SYS_FLAGSSET 0x030
#define SYS_FLAGSCLR 0x034
#define SYS_NVFLAGS 0x038
@@ -51,36 +48,32 @@
#define SYS_ID_HBI_SHIFT 16
#define SYS_PROCIDx_HBI_SHIFT 0
-#define SYS_LED_LED(n) (1 << (n))
-
#define SYS_MCI_CARDIN (1 << 0)
#define SYS_MCI_WPROT (1 << 1)
-#define SYS_FLASH_WPn (1 << 0)
-
#define SYS_MISC_MASTERSITE (1 << 14)
-#define SYS_CFGCTRL_START (1 << 31)
-#define SYS_CFGCTRL_WRITE (1 << 30)
-#define SYS_CFGCTRL_DCC(n) (((n) & 0xf) << 26)
-#define SYS_CFGCTRL_FUNC(n) (((n) & 0x3f) << 20)
-#define SYS_CFGCTRL_SITE(n) (((n) & 0x3) << 16)
-#define SYS_CFGCTRL_POSITION(n) (((n) & 0xf) << 12)
-#define SYS_CFGCTRL_DEVICE(n) (((n) & 0xfff) << 0)
-#define SYS_CFGSTAT_ERR (1 << 1)
-#define SYS_CFGSTAT_COMPLETE (1 << 0)
+static void __iomem *__vexpress_sysreg_base;
+static void __iomem *vexpress_sysreg_base(void)
+{
+ if (!__vexpress_sysreg_base) {
+ struct device_node *node = of_find_compatible_node(NULL, NULL,
+ "arm,vexpress-sysreg");
-static void __iomem *vexpress_sysreg_base;
-static struct device *vexpress_sysreg_dev;
-static LIST_HEAD(vexpress_sysreg_config_funcs);
-static struct device *vexpress_sysreg_config_bridge;
+ __vexpress_sysreg_base = of_iomap(node, 0);
+ }
+
+ WARN_ON(!__vexpress_sysreg_base);
+
+ return __vexpress_sysreg_base;
+}
static int vexpress_sysreg_get_master(void)
{
- if (readl(vexpress_sysreg_base + SYS_MISC) & SYS_MISC_MASTERSITE)
+ if (readl(vexpress_sysreg_base() + SYS_MISC) & SYS_MISC_MASTERSITE)
return VEXPRESS_SITE_DB2;
return VEXPRESS_SITE_DB1;
@@ -88,8 +81,13 @@ static int vexpress_sysreg_get_master(void)
void vexpress_flags_set(u32 data)
{
- writel(~0, vexpress_sysreg_base + SYS_FLAGSCLR);
- writel(data, vexpress_sysreg_base + SYS_FLAGSSET);
+ writel(~0, vexpress_sysreg_base() + SYS_FLAGSCLR);
+ writel(data, vexpress_sysreg_base() + SYS_FLAGSSET);
+}
+
+unsigned int vexpress_get_mci_cardin(struct device *dev)
+{
+ return readl(vexpress_sysreg_base() + SYS_MCI) & SYS_MCI_CARDIN;
}
u32 vexpress_get_procid(int site)
@@ -97,7 +95,7 @@ u32 vexpress_get_procid(int site)
if (site == VEXPRESS_SITE_MASTER)
site = vexpress_sysreg_get_master();
- return readl(vexpress_sysreg_base + (site == VEXPRESS_SITE_DB1 ?
+ return readl(vexpress_sysreg_base() + (site == VEXPRESS_SITE_DB1 ?
SYS_PROCID0 : SYS_PROCID1));
}
@@ -107,7 +105,7 @@ u32 vexpress_get_hbi(int site)
switch (site) {
case VEXPRESS_SITE_MB:
- id = readl(vexpress_sysreg_base + SYS_ID);
+ id = readl(vexpress_sysreg_base() + SYS_ID);
return (id >> SYS_ID_HBI_SHIFT) & SYS_HBI_MASK;
case VEXPRESS_SITE_MASTER:
case VEXPRESS_SITE_DB1:
@@ -121,406 +119,143 @@ u32 vexpress_get_hbi(int site)
void __iomem *vexpress_get_24mhz_clock_base(void)
{
- return vexpress_sysreg_base + SYS_24MHZ;
-}
-
-
-struct vexpress_sysreg_config_func {
- struct list_head list;
- struct regmap *regmap;
- int num_templates;
- u32 template[0]; /* Keep this last */
-};
-
-static int vexpress_sysreg_config_exec(struct vexpress_sysreg_config_func *func,
- int index, bool write, u32 *data)
-{
- u32 command, status;
- int tries;
- long timeout;
-
- if (WARN_ON(!vexpress_sysreg_base))
- return -ENOENT;
-
- if (WARN_ON(index > func->num_templates))
- return -EINVAL;
-
- command = readl(vexpress_sysreg_base + SYS_CFGCTRL);
- if (WARN_ON(command & SYS_CFGCTRL_START))
- return -EBUSY;
-
- command = func->template[index];
- command |= SYS_CFGCTRL_START;
- command |= write ? SYS_CFGCTRL_WRITE : 0;
-
- /* Use a canary for reads */
- if (!write)
- *data = 0xdeadbeef;
-
- dev_dbg(vexpress_sysreg_dev, "command %x, data %x\n",
- command, *data);
- writel(*data, vexpress_sysreg_base + SYS_CFGDATA);
- writel(0, vexpress_sysreg_base + SYS_CFGSTAT);
- writel(command, vexpress_sysreg_base + SYS_CFGCTRL);
- mb();
-
- /* The operation can take ages... Go to sleep, 100us initially */
- tries = 100;
- timeout = 100;
- do {
- set_current_state(TASK_INTERRUPTIBLE);
- schedule_timeout(usecs_to_jiffies(timeout));
- if (signal_pending(current))
- return -EINTR;
-
- status = readl(vexpress_sysreg_base + SYS_CFGSTAT);
- if (status & SYS_CFGSTAT_ERR)
- return -EFAULT;
-
- if (timeout > 20)
- timeout -= 20;
- } while (--tries && !(status & SYS_CFGSTAT_COMPLETE));
- if (WARN_ON_ONCE(!tries))
- return -ETIMEDOUT;
-
- if (!write) {
- *data = readl(vexpress_sysreg_base + SYS_CFGDATA);
- dev_dbg(vexpress_sysreg_dev, "func %p, read data %x\n",
- func, *data);
- }
-
- return 0;
-}
-
-static int vexpress_sysreg_config_read(void *context, unsigned int index,
- unsigned int *val)
-{
- struct vexpress_sysreg_config_func *func = context;
-
- return vexpress_sysreg_config_exec(func, index, false, val);
-}
-
-static int vexpress_sysreg_config_write(void *context, unsigned int index,
- unsigned int val)
-{
- struct vexpress_sysreg_config_func *func = context;
-
- return vexpress_sysreg_config_exec(func, index, true, &val);
-}
-
-struct regmap_config vexpress_sysreg_regmap_config = {
- .lock = vexpress_config_lock,
- .unlock = vexpress_config_unlock,
- .reg_bits = 32,
- .val_bits = 32,
- .reg_read = vexpress_sysreg_config_read,
- .reg_write = vexpress_sysreg_config_write,
- .reg_format_endian = REGMAP_ENDIAN_LITTLE,
- .val_format_endian = REGMAP_ENDIAN_LITTLE,
-};
-
-static struct regmap *vexpress_sysreg_config_regmap_init(struct device *dev,
- void *context)
-{
- struct platform_device *pdev = to_platform_device(dev);
- struct vexpress_sysreg_config_func *func;
- struct property *prop;
- const __be32 *val = NULL;
- __be32 energy_quirk[4];
- int num;
- u32 site, position, dcc;
- int err;
- int i;
-
- if (dev->of_node) {
- err = vexpress_config_get_topo(dev->of_node, &site, &position,
- &dcc);
- if (err)
- return ERR_PTR(err);
-
- prop = of_find_property(dev->of_node,
- "arm,vexpress-sysreg,func", NULL);
- if (!prop)
- return ERR_PTR(-EINVAL);
-
- num = prop->length / sizeof(u32) / 2;
- val = prop->value;
- } else {
- if (pdev->num_resources != 1 ||
- pdev->resource[0].flags != IORESOURCE_BUS)
- return ERR_PTR(-EFAULT);
-
- site = pdev->resource[0].start;
- if (site == VEXPRESS_SITE_MASTER)
- site = vexpress_sysreg_get_master();
- position = 0;
- dcc = 0;
- num = 1;
- }
-
- /*
- * "arm,vexpress-energy" function used to be described
- * by its first device only, now it requires both
- */
- if (num == 1 && of_device_is_compatible(dev->of_node,
- "arm,vexpress-energy")) {
- num = 2;
- energy_quirk[0] = *val;
- energy_quirk[2] = *val++;
- energy_quirk[1] = *val;
- energy_quirk[3] = cpu_to_be32(be32_to_cpup(val) + 1);
- val = energy_quirk;
- }
-
- func = kzalloc(sizeof(*func) + sizeof(*func->template) * num,
- GFP_KERNEL);
- if (!func)
- return NULL;
-
- func->num_templates = num;
-
- for (i = 0; i < num; i++) {
- u32 function, device;
-
- if (dev->of_node) {
- function = be32_to_cpup(val++);
- device = be32_to_cpup(val++);
- } else {
- function = pdev->resource[0].end;
- device = pdev->id;
- }
-
- dev_dbg(dev, "func %p: %u/%u/%u/%u/%u\n",
- func, site, position, dcc,
- function, device);
-
- func->template[i] = SYS_CFGCTRL_DCC(dcc);
- func->template[i] |= SYS_CFGCTRL_SITE(site);
- func->template[i] |= SYS_CFGCTRL_POSITION(position);
- func->template[i] |= SYS_CFGCTRL_FUNC(function);
- func->template[i] |= SYS_CFGCTRL_DEVICE(device);
- }
-
- vexpress_sysreg_regmap_config.max_register = num - 1;
-
- func->regmap = regmap_init(dev, NULL, func,
- &vexpress_sysreg_regmap_config);
-
- if (IS_ERR(func->regmap))
- kfree(func);
- else
- list_add(&func->list, &vexpress_sysreg_config_funcs);
-
- return func->regmap;
-}
-
-static void vexpress_sysreg_config_regmap_exit(struct regmap *regmap,
- void *context)
-{
- struct vexpress_sysreg_config_func *func, *tmp;
-
- regmap_exit(regmap);
-
- list_for_each_entry_safe(func, tmp, &vexpress_sysreg_config_funcs,
- list) {
- if (func->regmap == regmap) {
- list_del(&vexpress_sysreg_config_funcs);
- kfree(func);
- break;
- }
- }
-}
-
-static struct vexpress_config_bridge_ops vexpress_sysreg_config_bridge_ops = {
- .regmap_init = vexpress_sysreg_config_regmap_init,
- .regmap_exit = vexpress_sysreg_config_regmap_exit,
-};
-
-int vexpress_sysreg_config_device_register(struct platform_device *pdev)
-{
- pdev->dev.parent = vexpress_sysreg_config_bridge;
-
- return platform_device_register(pdev);
+ return vexpress_sysreg_base() + SYS_24MHZ;
}
void __init vexpress_sysreg_early_init(void __iomem *base)
{
- vexpress_sysreg_base = base;
- vexpress_config_set_master(vexpress_sysreg_get_master());
-}
-
-void __init vexpress_sysreg_of_early_init(void)
-{
- struct device_node *node;
-
- if (vexpress_sysreg_base)
- return;
-
- node = of_find_compatible_node(NULL, NULL, "arm,vexpress-sysreg");
- if (WARN_ON(!node))
- return;
-
- vexpress_sysreg_base = of_iomap(node, 0);
- if (WARN_ON(!vexpress_sysreg_base))
- return;
+ __vexpress_sysreg_base = base;
vexpress_config_set_master(vexpress_sysreg_get_master());
}
-#ifdef CONFIG_GPIOLIB
-
-#define VEXPRESS_SYSREG_GPIO(_name, _reg, _value) \
- [VEXPRESS_GPIO_##_name] = { \
- .reg = _reg, \
- .value = _reg##_##_value, \
- }
+/* The sysreg block is just a random collection of various functions... */
-static struct vexpress_sysreg_gpio {
- unsigned long reg;
- u32 value;
-} vexpress_sysreg_gpios[] = {
- VEXPRESS_SYSREG_GPIO(MMC_CARDIN, SYS_MCI, CARDIN),
- VEXPRESS_SYSREG_GPIO(MMC_WPROT, SYS_MCI, WPROT),
- VEXPRESS_SYSREG_GPIO(FLASH_WPn, SYS_FLASH, WPn),
- VEXPRESS_SYSREG_GPIO(LED0, SYS_LED, LED(0)),
- VEXPRESS_SYSREG_GPIO(LED1, SYS_LED, LED(1)),
- VEXPRESS_SYSREG_GPIO(LED2, SYS_LED, LED(2)),
- VEXPRESS_SYSREG_GPIO(LED3, SYS_LED, LED(3)),
- VEXPRESS_SYSREG_GPIO(LED4, SYS_LED, LED(4)),
- VEXPRESS_SYSREG_GPIO(LED5, SYS_LED, LED(5)),
- VEXPRESS_SYSREG_GPIO(LED6, SYS_LED, LED(6)),
- VEXPRESS_SYSREG_GPIO(LED7, SYS_LED, LED(7)),
+static struct syscon_platform_data vexpress_sysreg_sys_id_pdata = {
+ .label = "sys_id",
};
-static int vexpress_sysreg_gpio_direction_input(struct gpio_chip *chip,
- unsigned offset)
-{
- return 0;
-}
-
-static int vexpress_sysreg_gpio_get(struct gpio_chip *chip,
- unsigned offset)
-{
- struct vexpress_sysreg_gpio *gpio = &vexpress_sysreg_gpios[offset];
- u32 reg_value = readl(vexpress_sysreg_base + gpio->reg);
-
- return !!(reg_value & gpio->value);
-}
-
-static void vexpress_sysreg_gpio_set(struct gpio_chip *chip,
- unsigned offset, int value)
-{
- struct vexpress_sysreg_gpio *gpio = &vexpress_sysreg_gpios[offset];
- u32 reg_value = readl(vexpress_sysreg_base + gpio->reg);
-
- if (value)
- reg_value |= gpio->value;
- else
- reg_value &= ~gpio->value;
-
- writel(reg_value, vexpress_sysreg_base + gpio->reg);
-}
-
-static int vexpress_sysreg_gpio_direction_output(struct gpio_chip *chip,
- unsigned offset, int value)
-{
- vexpress_sysreg_gpio_set(chip, offset, value);
-
- return 0;
-}
-
-static struct gpio_chip vexpress_sysreg_gpio_chip = {
- .label = "vexpress-sysreg",
- .direction_input = vexpress_sysreg_gpio_direction_input,
- .direction_output = vexpress_sysreg_gpio_direction_output,
- .get = vexpress_sysreg_gpio_get,
- .set = vexpress_sysreg_gpio_set,
- .ngpio = ARRAY_SIZE(vexpress_sysreg_gpios),
- .base = 0,
+static struct bgpio_pdata vexpress_sysreg_sys_led_pdata = {
+ .label = "sys_led",
+ .base = -1,
+ .ngpio = 8,
};
-
-#define VEXPRESS_SYSREG_GREEN_LED(_name, _default_trigger, _gpio) \
- { \
- .name = "v2m:green:"_name, \
- .default_trigger = _default_trigger, \
- .gpio = VEXPRESS_GPIO_##_gpio, \
- }
-
-struct gpio_led vexpress_sysreg_leds[] = {
- VEXPRESS_SYSREG_GREEN_LED("user1", "heartbeat", LED0),
- VEXPRESS_SYSREG_GREEN_LED("user2", "mmc0", LED1),
- VEXPRESS_SYSREG_GREEN_LED("user3", "cpu0", LED2),
- VEXPRESS_SYSREG_GREEN_LED("user4", "cpu1", LED3),
- VEXPRESS_SYSREG_GREEN_LED("user5", "cpu2", LED4),
- VEXPRESS_SYSREG_GREEN_LED("user6", "cpu3", LED5),
- VEXPRESS_SYSREG_GREEN_LED("user7", "cpu4", LED6),
- VEXPRESS_SYSREG_GREEN_LED("user8", "cpu5", LED7),
+static struct bgpio_pdata vexpress_sysreg_sys_mci_pdata = {
+ .label = "sys_mci",
+ .base = -1,
+ .ngpio = 2,
};
-struct gpio_led_platform_data vexpress_sysreg_leds_pdata = {
- .num_leds = ARRAY_SIZE(vexpress_sysreg_leds),
- .leds = vexpress_sysreg_leds,
+static struct bgpio_pdata vexpress_sysreg_sys_flash_pdata = {
+ .label = "sys_flash",
+ .base = -1,
+ .ngpio = 1,
};
-#endif
-
+static struct syscon_platform_data vexpress_sysreg_sys_misc_pdata = {
+ .label = "sys_misc",
+};
-static ssize_t vexpress_sysreg_sys_id_show(struct device *dev,
- struct device_attribute *attr, char *buf)
-{
- return sprintf(buf, "0x%08x\n", readl(vexpress_sysreg_base + SYS_ID));
-}
+static struct syscon_platform_data vexpress_sysreg_sys_procid_pdata = {
+ .label = "sys_procid",
+};
-DEVICE_ATTR(sys_id, S_IRUGO, vexpress_sysreg_sys_id_show, NULL);
+static struct mfd_cell vexpress_sysreg_cells[] = {
+ {
+ .name = "syscon",
+ .num_resources = 1,
+ .resources = (struct resource []) {
+ DEFINE_RES_MEM(SYS_ID, 0x4),
+ },
+ .platform_data = &vexpress_sysreg_sys_id_pdata,
+ .pdata_size = sizeof(vexpress_sysreg_sys_id_pdata),
+ }, {
+ .name = "basic-mmio-gpio",
+ .of_compatible = "arm,vexpress-sysreg,sys_led",
+ .num_resources = 1,
+ .resources = (struct resource []) {
+ DEFINE_RES_MEM_NAMED(SYS_LED, 0x4, "dat"),
+ },
+ .platform_data = &vexpress_sysreg_sys_led_pdata,
+ .pdata_size = sizeof(vexpress_sysreg_sys_led_pdata),
+ }, {
+ .name = "basic-mmio-gpio",
+ .of_compatible = "arm,vexpress-sysreg,sys_mci",
+ .num_resources = 1,
+ .resources = (struct resource []) {
+ DEFINE_RES_MEM_NAMED(SYS_MCI, 0x4, "dat"),
+ },
+ .platform_data = &vexpress_sysreg_sys_mci_pdata,
+ .pdata_size = sizeof(vexpress_sysreg_sys_mci_pdata),
+ }, {
+ .name = "basic-mmio-gpio",
+ .of_compatible = "arm,vexpress-sysreg,sys_flash",
+ .num_resources = 1,
+ .resources = (struct resource []) {
+ DEFINE_RES_MEM_NAMED(SYS_FLASH, 0x4, "dat"),
+ },
+ .platform_data = &vexpress_sysreg_sys_flash_pdata,
+ .pdata_size = sizeof(vexpress_sysreg_sys_flash_pdata),
+ }, {
+ .name = "syscon",
+ .num_resources = 1,
+ .resources = (struct resource []) {
+ DEFINE_RES_MEM(SYS_MISC, 0x4),
+ },
+ .platform_data = &vexpress_sysreg_sys_misc_pdata,
+ .pdata_size = sizeof(vexpress_sysreg_sys_misc_pdata),
+ }, {
+ .name = "syscon",
+ .num_resources = 1,
+ .resources = (struct resource []) {
+ DEFINE_RES_MEM(SYS_PROCID0, 0x8),
+ },
+ .platform_data = &vexpress_sysreg_sys_procid_pdata,
+ .pdata_size = sizeof(vexpress_sysreg_sys_procid_pdata),
+ }, {
+ .name = "vexpress-syscfg",
+ .num_resources = 1,
+ .resources = (struct resource []) {
+ DEFINE_RES_MEM(SYS_CFGDATA, 0xc),
+ },
+ }
+};
static int vexpress_sysreg_probe(struct platform_device *pdev)
{
- int err;
- struct resource *res = platform_get_resource(pdev,
- IORESOURCE_MEM, 0);
-
- if (!devm_request_mem_region(&pdev->dev, res->start,
- resource_size(res), pdev->name)) {
- dev_err(&pdev->dev, "Failed to request memory region!\n");
- return -EBUSY;
- }
+ struct resource *mem;
+ void __iomem *base;
+ struct bgpio_chip *mmc_gpio_chip;
- if (!vexpress_sysreg_base)
- vexpress_sysreg_base = devm_ioremap(&pdev->dev, res->start,
- resource_size(res));
+ mem = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+ if (!mem)
+ return -EINVAL;
- if (!vexpress_sysreg_base) {
- dev_err(&pdev->dev, "Failed to obtain base address!\n");
- return -EFAULT;
- }
+ base = devm_ioremap(&pdev->dev, mem->start, resource_size(mem));
+ if (!base)
+ return -ENOMEM;
vexpress_config_set_master(vexpress_sysreg_get_master());
- vexpress_sysreg_dev = &pdev->dev;
-
-#ifdef CONFIG_GPIOLIB
- vexpress_sysreg_gpio_chip.dev = &pdev->dev;
- err = gpiochip_add(&vexpress_sysreg_gpio_chip);
- if (err) {
- dev_err(&pdev->dev, "Failed to register GPIO chip! (%d)\n",
- err);
- return err;
- }
- platform_device_register_data(vexpress_sysreg_dev, "leds-gpio",
- PLATFORM_DEVID_AUTO, &vexpress_sysreg_leds_pdata,
- sizeof(vexpress_sysreg_leds_pdata));
-#endif
-
- vexpress_sysreg_config_bridge = vexpress_config_bridge_register(
- &pdev->dev, &vexpress_sysreg_config_bridge_ops, NULL);
- WARN_ON(!vexpress_sysreg_config_bridge);
-
- device_create_file(vexpress_sysreg_dev, &dev_attr_sys_id);
-
- return 0;
+ /*
+ * Duplicated SYS_MCI pseudo-GPIO controller for compatibility with
+ * older trees using sysreg node for MMC control lines.
+ */
+ mmc_gpio_chip = devm_kzalloc(&pdev->dev, sizeof(*mmc_gpio_chip),
+ GFP_KERNEL);
+ if (!mmc_gpio_chip)
+ return -ENOMEM;
+ bgpio_init(mmc_gpio_chip, &pdev->dev, 0x4, base + SYS_MCI,
+ NULL, NULL, NULL, NULL, 0);
+ mmc_gpio_chip->gc.ngpio = 2;
+ gpiochip_add(&mmc_gpio_chip->gc);
+
+ return mfd_add_devices(&pdev->dev, PLATFORM_DEVID_AUTO,
+ vexpress_sysreg_cells,
+ ARRAY_SIZE(vexpress_sysreg_cells), mem, 0, NULL);
}
static const struct of_device_id vexpress_sysreg_match[] = {
diff --git a/drivers/misc/Kconfig b/drivers/misc/Kconfig
index 8baff0e..d9663ef 100644
--- a/drivers/misc/Kconfig
+++ b/drivers/misc/Kconfig
@@ -515,6 +515,15 @@ config SRAM
the genalloc API. It is supposed to be used for small on-chip SRAM
areas found on many SoCs.
+config VEXPRESS_SYSCFG
+ bool "Versatile Express System Configuration driver"
+ depends on VEXPRESS_CONFIG
+ default y
+ help
+ ARM Ltd. Versatile Express uses specialised platform configuration
+ bus. System Configuration interface is one of the possible means
+ of generating transactions on this bus.
+
source "drivers/misc/c2port/Kconfig"
source "drivers/misc/eeprom/Kconfig"
source "drivers/misc/cb710/Kconfig"
diff --git a/drivers/misc/Makefile b/drivers/misc/Makefile
index 7eb4b69..d59ce12 100644
--- a/drivers/misc/Makefile
+++ b/drivers/misc/Makefile
@@ -55,3 +55,4 @@ obj-$(CONFIG_SRAM) += sram.o
obj-y += mic/
obj-$(CONFIG_GENWQE) += genwqe/
obj-$(CONFIG_ECHO) += echo/
+obj-$(CONFIG_VEXPRESS_SYSCFG) += vexpress-syscfg.o
diff --git a/drivers/misc/vexpress-syscfg.c b/drivers/misc/vexpress-syscfg.c
new file mode 100644
index 0000000..73068e5
--- /dev/null
+++ b/drivers/misc/vexpress-syscfg.c
@@ -0,0 +1,324 @@
+/*
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * Copyright (C) 2014 ARM Limited
+ */
+
+#include <linux/delay.h>
+#include <linux/err.h>
+#include <linux/io.h>
+#include <linux/of.h>
+#include <linux/platform_device.h>
+#include <linux/sched.h>
+#include <linux/slab.h>
+#include <linux/syscore_ops.h>
+#include <linux/vexpress.h>
+
+
+#define SYS_CFGDATA 0x0
+
+#define SYS_CFGCTRL 0x4
+#define SYS_CFGCTRL_START (1 << 31)
+#define SYS_CFGCTRL_WRITE (1 << 30)
+#define SYS_CFGCTRL_DCC(n) (((n) & 0xf) << 26)
+#define SYS_CFGCTRL_FUNC(n) (((n) & 0x3f) << 20)
+#define SYS_CFGCTRL_SITE(n) (((n) & 0x3) << 16)
+#define SYS_CFGCTRL_POSITION(n) (((n) & 0xf) << 12)
+#define SYS_CFGCTRL_DEVICE(n) (((n) & 0xfff) << 0)
+
+#define SYS_CFGSTAT 0x8
+#define SYS_CFGSTAT_ERR (1 << 1)
+#define SYS_CFGSTAT_COMPLETE (1 << 0)
+
+
+struct vexpress_syscfg {
+ struct device *dev;
+ void __iomem *base;
+ struct list_head funcs;
+};
+
+struct vexpress_syscfg_func {
+ struct list_head list;
+ struct vexpress_syscfg *syscfg;
+ struct regmap *regmap;
+ int num_templates;
+ u32 template[0]; /* Keep it last! */
+};
+
+
+static int vexpress_syscfg_exec(struct vexpress_syscfg_func *func,
+ int index, bool write, u32 *data)
+{
+ struct vexpress_syscfg *syscfg = func->syscfg;
+ u32 command, status;
+ int tries;
+ long timeout;
+
+ if (WARN_ON(index > func->num_templates))
+ return -EINVAL;
+
+ command = readl(syscfg->base + SYS_CFGCTRL);
+ if (WARN_ON(command & SYS_CFGCTRL_START))
+ return -EBUSY;
+
+ command = func->template[index];
+ command |= SYS_CFGCTRL_START;
+ command |= write ? SYS_CFGCTRL_WRITE : 0;
+
+ /* Use a canary for reads */
+ if (!write)
+ *data = 0xdeadbeef;
+
+ dev_dbg(syscfg->dev, "func %p, command %x, data %x\n",
+ func, command, *data);
+ writel(*data, syscfg->base + SYS_CFGDATA);
+ writel(0, syscfg->base + SYS_CFGSTAT);
+ writel(command, syscfg->base + SYS_CFGCTRL);
+ mb();
+
+ /* The operation can take ages... Go to sleep, 100us initially */
+ tries = 100;
+ timeout = 100;
+ do {
+ if (!irqs_disabled()) {
+ set_current_state(TASK_INTERRUPTIBLE);
+ schedule_timeout(usecs_to_jiffies(timeout));
+ if (signal_pending(current))
+ return -EINTR;
+ } else {
+ udelay(timeout);
+ }
+
+ status = readl(syscfg->base + SYS_CFGSTAT);
+ if (status & SYS_CFGSTAT_ERR)
+ return -EFAULT;
+
+ if (timeout > 20)
+ timeout -= 20;
+ } while (--tries && !(status & SYS_CFGSTAT_COMPLETE));
+ if (WARN_ON_ONCE(!tries))
+ return -ETIMEDOUT;
+
+ if (!write) {
+ *data = readl(syscfg->base + SYS_CFGDATA);
+ dev_dbg(syscfg->dev, "func %p, read data %x\n", func, *data);
+ }
+
+ return 0;
+}
+
+static int vexpress_syscfg_read(void *context, unsigned int index,
+ unsigned int *val)
+{
+ struct vexpress_syscfg_func *func = context;
+
+ return vexpress_syscfg_exec(func, index, false, val);
+}
+
+static int vexpress_syscfg_write(void *context, unsigned int index,
+ unsigned int val)
+{
+ struct vexpress_syscfg_func *func = context;
+
+ return vexpress_syscfg_exec(func, index, true, &val);
+}
+
+struct regmap_config vexpress_syscfg_regmap_config = {
+ .lock = vexpress_config_lock,
+ .unlock = vexpress_config_unlock,
+ .reg_bits = 32,
+ .val_bits = 32,
+ .reg_read = vexpress_syscfg_read,
+ .reg_write = vexpress_syscfg_write,
+ .reg_format_endian = REGMAP_ENDIAN_LITTLE,
+ .val_format_endian = REGMAP_ENDIAN_LITTLE,
+};
+
+
+static struct regmap *vexpress_syscfg_regmap_init(struct device *dev,
+ void *context)
+{
+ struct platform_device *pdev = to_platform_device(dev);
+ struct vexpress_syscfg *syscfg = context;
+ struct vexpress_syscfg_func *func;
+ struct property *prop;
+ const __be32 *val = NULL;
+ __be32 energy_quirk[4];
+ int num;
+ u32 site, position, dcc;
+ int i;
+
+ if (dev->of_node) {
+ int err = vexpress_config_get_topo(dev->of_node, &site,
+ &position, &dcc);
+
+ if (err)
+ return ERR_PTR(err);
+
+ prop = of_find_property(dev->of_node,
+ "arm,vexpress-sysreg,func", NULL);
+ if (!prop)
+ return ERR_PTR(-EINVAL);
+
+ num = prop->length / sizeof(u32) / 2;
+ val = prop->value;
+ } else {
+ if (pdev->num_resources != 1 ||
+ pdev->resource[0].flags != IORESOURCE_BUS)
+ return ERR_PTR(-EFAULT);
+
+ site = pdev->resource[0].start;
+ if (site == VEXPRESS_SITE_MASTER)
+ site = vexpress_config_get_master();
+ position = 0;
+ dcc = 0;
+ num = 1;
+ }
+
+ /*
+ * "arm,vexpress-energy" function used to be described
+ * by its first device only, now it requires both
+ */
+ if (num == 1 && of_device_is_compatible(dev->of_node,
+ "arm,vexpress-energy")) {
+ num = 2;
+ energy_quirk[0] = *val;
+ energy_quirk[2] = *val++;
+ energy_quirk[1] = *val;
+ energy_quirk[3] = cpu_to_be32(be32_to_cpup(val) + 1);
+ val = energy_quirk;
+ }
+
+ func = kzalloc(sizeof(*func) + sizeof(*func->template) * num,
+ GFP_KERNEL);
+ if (!func)
+ return NULL;
+
+ func->syscfg = syscfg;
+ func->num_templates = num;
+
+ for (i = 0; i < num; i++) {
+ u32 function, device;
+
+ if (dev->of_node) {
+ function = be32_to_cpup(val++);
+ device = be32_to_cpup(val++);
+ } else {
+ function = pdev->resource[0].end;
+ device = pdev->id;
+ }
+
+ dev_dbg(dev, "func %p: %u/%u/%u/%u/%u\n",
+ func, site, position, dcc,
+ function, device);
+
+ func->template[i] = SYS_CFGCTRL_DCC(dcc);
+ func->template[i] |= SYS_CFGCTRL_SITE(site);
+ func->template[i] |= SYS_CFGCTRL_POSITION(position);
+ func->template[i] |= SYS_CFGCTRL_FUNC(function);
+ func->template[i] |= SYS_CFGCTRL_DEVICE(device);
+ }
+
+ vexpress_syscfg_regmap_config.max_register = num - 1;
+
+ func->regmap = regmap_init(dev, NULL, func,
+ &vexpress_syscfg_regmap_config);
+
+ if (IS_ERR(func->regmap))
+ kfree(func);
+ else
+ list_add(&func->list, &syscfg->funcs);
+
+ return func->regmap;
+}
+
+static void vexpress_syscfg_regmap_exit(struct regmap *regmap, void *context)
+{
+ struct vexpress_syscfg *syscfg = context;
+ struct vexpress_syscfg_func *func, *tmp;
+
+ regmap_exit(regmap);
+
+ list_for_each_entry_safe(func, tmp, &syscfg->funcs, list) {
+ if (func->regmap == regmap) {
+ list_del(&syscfg->funcs);
+ kfree(func);
+ break;
+ }
+ }
+}
+
+static struct vexpress_config_bridge_ops vexpress_syscfg_bridge_ops = {
+ .regmap_init = vexpress_syscfg_regmap_init,
+ .regmap_exit = vexpress_syscfg_regmap_exit,
+};
+
+
+/* Non-DT hack, to be gone... */
+static struct device *vexpress_syscfg_bridge;
+
+int vexpress_syscfg_device_register(struct platform_device *pdev)
+{
+ pdev->dev.parent = vexpress_syscfg_bridge;
+
+ return platform_device_register(pdev);
+}
+
+
+int vexpress_syscfg_probe(struct platform_device *pdev)
+{
+ struct vexpress_syscfg *syscfg;
+ struct resource *res;
+ struct device *bridge;
+
+ syscfg = devm_kzalloc(&pdev->dev, sizeof(*syscfg), GFP_KERNEL);
+ if (!syscfg)
+ return -ENOMEM;
+ syscfg->dev = &pdev->dev;
+ INIT_LIST_HEAD(&syscfg->funcs);
+
+ res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+ if (!devm_request_mem_region(&pdev->dev, res->start,
+ resource_size(res), pdev->name))
+ return -EBUSY;
+
+ syscfg->base = devm_ioremap(&pdev->dev, res->start, resource_size(res));
+ if (!syscfg->base)
+ return -EFAULT;
+
+ /* Must use dev.parent (MFD), as that's where DT phandle points at... */
+ bridge = vexpress_config_bridge_register(pdev->dev.parent,
+ &vexpress_syscfg_bridge_ops, syscfg);
+ if (IS_ERR(bridge))
+ return PTR_ERR(bridge);
+
+ /* Non-DT case */
+ if (!pdev->dev.of_node)
+ vexpress_syscfg_bridge = bridge;
+
+ return 0;
+}
+
+static const struct platform_device_id vexpress_syscfg_id_table[] = {
+ { "vexpress-syscfg", },
+ {},
+};
+
+static struct platform_driver vexpress_syscfg_driver = {
+ .driver.name = "vexpress-syscfg",
+ .id_table = vexpress_syscfg_id_table,
+ .probe = vexpress_syscfg_probe,
+};
+
+static int __init vexpress_syscfg_init(void)
+{
+ return platform_driver_register(&vexpress_syscfg_driver);
+}
+core_initcall(vexpress_syscfg_init);
diff --git a/include/linux/vexpress.h b/include/linux/vexpress.h
index 6b206ba..46636e3 100644
--- a/include/linux/vexpress.h
+++ b/include/linux/vexpress.h
@@ -24,18 +24,6 @@
#define VEXPRESS_SITE_DB2 2
#define VEXPRESS_SITE_MASTER 0xf
-#define VEXPRESS_GPIO_MMC_CARDIN 0
-#define VEXPRESS_GPIO_MMC_WPROT 1
-#define VEXPRESS_GPIO_FLASH_WPn 2
-#define VEXPRESS_GPIO_LED0 3
-#define VEXPRESS_GPIO_LED1 4
-#define VEXPRESS_GPIO_LED2 5
-#define VEXPRESS_GPIO_LED3 6
-#define VEXPRESS_GPIO_LED4 7
-#define VEXPRESS_GPIO_LED5 8
-#define VEXPRESS_GPIO_LED6 9
-#define VEXPRESS_GPIO_LED7 10
-
#define VEXPRESS_RES_FUNC(_site, _func) \
{ \
.start = (_site), \
@@ -70,14 +58,14 @@ struct regmap *devm_regmap_init_vexpress_config(struct device *dev);
/* Platform control */
+unsigned int vexpress_get_mci_cardin(struct device *dev);
u32 vexpress_get_procid(int site);
u32 vexpress_get_hbi(int site);
void *vexpress_get_24mhz_clock_base(void);
void vexpress_flags_set(u32 data);
void vexpress_sysreg_early_init(void __iomem *base);
-void vexpress_sysreg_of_early_init(void);
-int vexpress_sysreg_config_device_register(struct platform_device *pdev);
+int vexpress_syscfg_device_register(struct platform_device *pdev);
/* Clocks */
--
1.9.1
From: Sudeep KarkadaNagesha <[email protected]>
arm_dt_init_cpu_maps parses the device tree, validates and sets the
cpu_possible_mask appropriately. It is unnecessary to do another DT
parse to get the number of cpus, use num_possible_cpus instead.
This patch also removes setting cpu_present_mask as platforms should
only re-initialize it in smp_prepare_cpus() if present != possible.
Signed-off-by: Sudeep KarkadaNagesha <[email protected]>
Signed-off-by: Pawel Moll <[email protected]>
---
arch/arm/mach-vexpress/platsmp.c | 31 +------------------------------
1 file changed, 1 insertion(+), 30 deletions(-)
diff --git a/arch/arm/mach-vexpress/platsmp.c b/arch/arm/mach-vexpress/platsmp.c
index 993c9ae..12a8751 100644
--- a/arch/arm/mach-vexpress/platsmp.c
+++ b/arch/arm/mach-vexpress/platsmp.c
@@ -77,39 +77,13 @@ void __init vexpress_dt_smp_map_io(void)
WARN_ON(of_scan_flat_dt(vexpress_dt_find_scu, NULL));
}
-static int __init vexpress_dt_cpus_num(unsigned long node, const char *uname,
- int depth, void *data)
-{
- static int prev_depth = -1;
- static int nr_cpus = -1;
-
- if (prev_depth > depth && nr_cpus > 0)
- return nr_cpus;
-
- if (nr_cpus < 0 && strcmp(uname, "cpus") == 0)
- nr_cpus = 0;
-
- if (nr_cpus >= 0) {
- const char *device_type = of_get_flat_dt_prop(node,
- "device_type", NULL);
-
- if (device_type && strcmp(device_type, "cpu") == 0)
- nr_cpus++;
- }
-
- prev_depth = depth;
-
- return 0;
-}
-
static void __init vexpress_dt_smp_init_cpus(void)
{
int ncores = 0, i;
switch (vexpress_dt_scu) {
case GENERIC_SCU:
- ncores = of_scan_flat_dt(vexpress_dt_cpus_num, NULL);
- break;
+ return;
case CORTEX_A9_SCU:
ncores = scu_get_core_count(vexpress_dt_cortex_a9_scu_base);
break;
@@ -133,12 +107,9 @@ static void __init vexpress_dt_smp_init_cpus(void)
static void __init vexpress_dt_smp_prepare_cpus(unsigned int max_cpus)
{
- int i;
switch (vexpress_dt_scu) {
case GENERIC_SCU:
- for (i = 0; i < max_cpus; i++)
- set_cpu_present(i, true);
break;
case CORTEX_A9_SCU:
scu_enable(vexpress_dt_cortex_a9_scu_base);
--
1.9.1
The last reason for static memory mapping is the HBI (board
identification number) check early in the machine code.
Moving the check to the sysreg driver makes it possible to
completely remove the early mapping and init functions.
Signed-off-by: Pawel Moll <[email protected]>
---
arch/arm/mach-vexpress/v2m.c | 49 -------------------------------------------
drivers/mfd/vexpress-sysreg.c | 30 ++++++++++----------------
include/linux/vexpress.h | 1 -
3 files changed, 11 insertions(+), 69 deletions(-)
diff --git a/arch/arm/mach-vexpress/v2m.c b/arch/arm/mach-vexpress/v2m.c
index d8b419b..38f4f6f 100644
--- a/arch/arm/mach-vexpress/v2m.c
+++ b/arch/arm/mach-vexpress/v2m.c
@@ -370,53 +370,6 @@ MACHINE_START(VEXPRESS, "ARM-Versatile Express")
.init_machine = v2m_init,
MACHINE_END
-static struct map_desc v2m_rs1_io_desc __initdata = {
- .virtual = V2M_PERIPH,
- .pfn = __phys_to_pfn(0x1c000000),
- .length = SZ_2M,
- .type = MT_DEVICE,
-};
-
-static int __init v2m_dt_scan_memory_map(unsigned long node, const char *uname,
- int depth, void *data)
-{
- const char **map = data;
-
- if (strcmp(uname, "motherboard") != 0)
- return 0;
-
- *map = of_get_flat_dt_prop(node, "arm,v2m-memory-map", NULL);
-
- return 1;
-}
-
-void __init v2m_dt_map_io(void)
-{
- const char *map = NULL;
-
- of_scan_flat_dt(v2m_dt_scan_memory_map, &map);
-
- if (map && strcmp(map, "rs1") == 0)
- iotable_init(&v2m_rs1_io_desc, 1);
- else
- iotable_init(v2m_io_desc, ARRAY_SIZE(v2m_io_desc));
-}
-
-void __init v2m_dt_init_early(void)
-{
- u32 dt_hbi;
-
- /* Confirm board type against DT property, if available */
- if (of_property_read_u32(of_allnodes, "arm,hbi", &dt_hbi) == 0) {
- u32 hbi = vexpress_get_hbi(VEXPRESS_SITE_MASTER);
-
- if (WARN_ON(dt_hbi != hbi))
- pr_warning("vexpress: DT HBI (%x) is not matching "
- "hardware (%x)!\n", dt_hbi, hbi);
- }
-}
-
-
static void __init v2m_dt_init(void)
{
l2x0_of_init(0x00400000, 0xfe0fffff);
@@ -432,7 +385,5 @@ DT_MACHINE_START(VEXPRESS_DT, "ARM-Versatile Express")
.dt_compat = v2m_dt_match,
.smp = smp_ops(vexpress_smp_dt_ops),
.smp_init = smp_init_ops(vexpress_smp_init_ops),
- .map_io = v2m_dt_map_io,
- .init_early = v2m_dt_init_early,
.init_machine = v2m_dt_init,
MACHINE_END
diff --git a/drivers/mfd/vexpress-sysreg.c b/drivers/mfd/vexpress-sysreg.c
index 952df84..9e21e4f 100644
--- a/drivers/mfd/vexpress-sysreg.c
+++ b/drivers/mfd/vexpress-sysreg.c
@@ -45,7 +45,6 @@
#define SYS_CFGSTAT 0x0a8
#define SYS_HBI_MASK 0xfff
-#define SYS_ID_HBI_SHIFT 16
#define SYS_PROCIDx_HBI_SHIFT 0
#define SYS_MCI_CARDIN (1 << 0)
@@ -99,24 +98,6 @@ u32 vexpress_get_procid(int site)
SYS_PROCID0 : SYS_PROCID1));
}
-u32 vexpress_get_hbi(int site)
-{
- u32 id;
-
- switch (site) {
- case VEXPRESS_SITE_MB:
- id = readl(vexpress_sysreg_base() + SYS_ID);
- return (id >> SYS_ID_HBI_SHIFT) & SYS_HBI_MASK;
- case VEXPRESS_SITE_MASTER:
- case VEXPRESS_SITE_DB1:
- case VEXPRESS_SITE_DB2:
- id = vexpress_get_procid(site);
- return (id >> SYS_PROCIDx_HBI_SHIFT) & SYS_HBI_MASK;
- }
-
- return ~0;
-}
-
void __iomem *vexpress_get_24mhz_clock_base(void)
{
return vexpress_sysreg_base() + SYS_24MHZ;
@@ -229,6 +210,7 @@ static int vexpress_sysreg_probe(struct platform_device *pdev)
struct resource *mem;
void __iomem *base;
struct bgpio_chip *mmc_gpio_chip;
+ u32 dt_hbi;
mem = platform_get_resource(pdev, IORESOURCE_MEM, 0);
if (!mem)
@@ -240,6 +222,16 @@ static int vexpress_sysreg_probe(struct platform_device *pdev)
vexpress_config_set_master(vexpress_sysreg_get_master());
+ /* Confirm board type against DT property, if available */
+ if (of_property_read_u32(of_allnodes, "arm,hbi", &dt_hbi) == 0) {
+ u32 id = vexpress_get_procid(VEXPRESS_SITE_MASTER);
+ u32 hbi = (id >> SYS_PROCIDx_HBI_SHIFT) & SYS_HBI_MASK;
+
+ if (WARN_ON(dt_hbi != hbi))
+ dev_warn(&pdev->dev, "DT HBI (%x) is not matching hardware (%x)!\n",
+ dt_hbi, hbi);
+ }
+
/*
* Duplicated SYS_MCI pseudo-GPIO controller for compatibility with
* older trees using sysreg node for MMC control lines.
diff --git a/include/linux/vexpress.h b/include/linux/vexpress.h
index 46636e3..a4c9547 100644
--- a/include/linux/vexpress.h
+++ b/include/linux/vexpress.h
@@ -60,7 +60,6 @@ struct regmap *devm_regmap_init_vexpress_config(struct device *dev);
unsigned int vexpress_get_mci_cardin(struct device *dev);
u32 vexpress_get_procid(int site);
-u32 vexpress_get_hbi(int site);
void *vexpress_get_24mhz_clock_base(void);
void vexpress_flags_set(u32 data);
--
1.9.1
In "Device Tree powered" systems, platform devices are usually
massively populated with of_platform_populate() call, executed
at some level of initcalls, either by generic architecture
or by platform-specific code.
There are situations though where certain devices must be
created (and bound with drivers) before all the others.
This presents a challenge, as devices created explicitly
would be created again by of_platform_populate().
This patch tries to solve that issue in a generic way,
adding a "populated" flag for a DT node description.
Once set, this device will never be created again via
of_* API, so of_platform_populate() will skip such nodes
(and its children) in a similar way to the non-available
ones.
Cc: [email protected]
Signed-off-by: Pawel Moll <[email protected]>
---
drivers/of/platform.c | 10 ++++++++--
include/linux/of.h | 1 +
2 files changed, 9 insertions(+), 2 deletions(-)
diff --git a/drivers/of/platform.c b/drivers/of/platform.c
index 404d1da..0ae757a 100644
--- a/drivers/of/platform.c
+++ b/drivers/of/platform.c
@@ -204,7 +204,8 @@ static struct platform_device *of_platform_device_create_pdata(
{
struct platform_device *dev;
- if (!of_device_is_available(np))
+ if (!of_device_is_available(np) ||
+ of_node_check_flag(np, OF_POPULATED))
return NULL;
dev = of_device_alloc(np, bus_id, parent);
@@ -230,6 +231,8 @@ static struct platform_device *of_platform_device_create_pdata(
return NULL;
}
+ of_node_set_flag(np, OF_POPULATED);
+
return dev;
}
@@ -262,7 +265,8 @@ static struct amba_device *of_amba_device_create(struct device_node *node,
pr_debug("Creating amba device %s\n", node->full_name);
- if (!of_device_is_available(node))
+ if (!of_device_is_available(node) ||
+ of_node_check_flag(node, OF_POPULATED))
return NULL;
dev = amba_device_alloc(NULL, 0, 0);
@@ -305,6 +309,8 @@ static struct amba_device *of_amba_device_create(struct device_node *node,
goto err_free;
}
+ of_node_set_flag(node, OF_POPULATED);
+
return dev;
err_free:
diff --git a/include/linux/of.h b/include/linux/of.h
index 3bad8d1..fd3aaee 100644
--- a/include/linux/of.h
+++ b/include/linux/of.h
@@ -197,6 +197,7 @@ static inline unsigned long of_read_ulong(const __be32 *cell, int size)
/* flag descriptions */
#define OF_DYNAMIC 1 /* node and properties were allocated via kmalloc */
#define OF_DETACHED 2 /* node has been detached from the device tree */
+#define OF_POPULATED 3 /* device already created for the node */
#define OF_IS_DYNAMIC(x) test_bit(OF_DYNAMIC, &x->_flags)
#define OF_MARK_DYNAMIC(x) set_bit(OF_DYNAMIC, &x->_flags)
--
1.9.1
On 04/28/2014 10:57 AM, Pawel Moll wrote:
> Use devm_hwmon_device_register_with_groups instead of
> the old-style manual attributes and hwmon device registration.
>
> Also, unwind the attribute group macros for better code
> readability.
>
> Cc: Jean Delvare <[email protected]>
> Cc: Guenter Roeck <[email protected]>
> Cc: [email protected]
> Signed-off-by: Pawel Moll <[email protected]>
> ---
> drivers/hwmon/vexpress.c | 91 ++++++++++++++++--------------------------------
> 1 file changed, 30 insertions(+), 61 deletions(-)
>
> diff --git a/drivers/hwmon/vexpress.c b/drivers/hwmon/vexpress.c
> index d853332..ed6bf0e 100644
> --- a/drivers/hwmon/vexpress.c
> +++ b/drivers/hwmon/vexpress.c
> @@ -27,17 +27,8 @@
> struct vexpress_hwmon_data {
> struct device *hwmon_dev;
> struct regmap *reg;
> - const char *name;
> };
>
> -static ssize_t vexpress_hwmon_name_show(struct device *dev,
> - struct device_attribute *dev_attr, char *buffer)
> -{
> - struct vexpress_hwmon_data *data = dev_get_drvdata(dev);
> -
> - return sprintf(buffer, "%s\n", data->name);
> -}
> -
> static ssize_t vexpress_hwmon_label_show(struct device *dev,
> struct device_attribute *dev_attr, char *buffer)
> {
> @@ -95,16 +86,6 @@ static umode_t vexpress_hwmon_attr_is_visible(struct kobject *kobj,
> return attr->mode;
> }
>
> -static DEVICE_ATTR(name, S_IRUGO, vexpress_hwmon_name_show, NULL);
> -
> -#define VEXPRESS_HWMON_ATTRS(_name, _label_attr, _input_attr) \
> -struct attribute *vexpress_hwmon_attrs_##_name[] = { \
> - &dev_attr_name.attr, \
> - &dev_attr_##_label_attr.attr, \
> - &sensor_dev_attr_##_input_attr.dev_attr.attr, \
> - NULL \
> -}
> -
> struct vexpress_hwmon_type {
> const char *name;
> const struct attribute_group **attr_groups;
> @@ -114,10 +95,13 @@ struct vexpress_hwmon_type {
> static DEVICE_ATTR(in1_label, S_IRUGO, vexpress_hwmon_label_show, NULL);
> static SENSOR_DEVICE_ATTR(in1_input, S_IRUGO, vexpress_hwmon_u32_show,
> NULL, 1000);
> -static VEXPRESS_HWMON_ATTRS(volt, in1_label, in1_input);
> static struct attribute_group vexpress_hwmon_group_volt = {
> .is_visible = vexpress_hwmon_attr_is_visible,
> - .attrs = vexpress_hwmon_attrs_volt,
> + .attrs = (struct attribute *[]) {
Is this typecast necessary ?
> + &dev_attr_in1_label.attr,
> + &sensor_dev_attr_in1_input.dev_attr.attr,
> + NULL
> + },
> };
> static struct vexpress_hwmon_type vexpress_hwmon_volt = {
> .name = "vexpress_volt",
> @@ -131,10 +115,13 @@ static struct vexpress_hwmon_type vexpress_hwmon_volt = {
> static DEVICE_ATTR(curr1_label, S_IRUGO, vexpress_hwmon_label_show, NULL);
> static SENSOR_DEVICE_ATTR(curr1_input, S_IRUGO, vexpress_hwmon_u32_show,
> NULL, 1000);
> -static VEXPRESS_HWMON_ATTRS(amp, curr1_label, curr1_input);
> static struct attribute_group vexpress_hwmon_group_amp = {
> .is_visible = vexpress_hwmon_attr_is_visible,
> - .attrs = vexpress_hwmon_attrs_amp,
> + .attrs = (struct attribute *[]) {
> + &dev_attr_curr1_label.attr,
> + &sensor_dev_attr_curr1_input.dev_attr.attr,
> + NULL
> + },
> };
> static struct vexpress_hwmon_type vexpress_hwmon_amp = {
> .name = "vexpress_amp",
> @@ -147,10 +134,13 @@ static struct vexpress_hwmon_type vexpress_hwmon_amp = {
> static DEVICE_ATTR(temp1_label, S_IRUGO, vexpress_hwmon_label_show, NULL);
> static SENSOR_DEVICE_ATTR(temp1_input, S_IRUGO, vexpress_hwmon_u32_show,
> NULL, 1000);
> -static VEXPRESS_HWMON_ATTRS(temp, temp1_label, temp1_input);
> static struct attribute_group vexpress_hwmon_group_temp = {
> .is_visible = vexpress_hwmon_attr_is_visible,
> - .attrs = vexpress_hwmon_attrs_temp,
> + .attrs = (struct attribute *[]) {
> + &dev_attr_temp1_label.attr,
> + &sensor_dev_attr_temp1_input.dev_attr.attr,
> + NULL
> + },
> };
> static struct vexpress_hwmon_type vexpress_hwmon_temp = {
> .name = "vexpress_temp",
> @@ -163,10 +153,13 @@ static struct vexpress_hwmon_type vexpress_hwmon_temp = {
> static DEVICE_ATTR(power1_label, S_IRUGO, vexpress_hwmon_label_show, NULL);
> static SENSOR_DEVICE_ATTR(power1_input, S_IRUGO, vexpress_hwmon_u32_show,
> NULL, 1);
> -static VEXPRESS_HWMON_ATTRS(power, power1_label, power1_input);
> static struct attribute_group vexpress_hwmon_group_power = {
> .is_visible = vexpress_hwmon_attr_is_visible,
> - .attrs = vexpress_hwmon_attrs_power,
> + .attrs = (struct attribute *[]) {
> + &dev_attr_power1_label.attr,
> + &sensor_dev_attr_power1_input.dev_attr.attr,
> + NULL
> + },
> };
> static struct vexpress_hwmon_type vexpress_hwmon_power = {
> .name = "vexpress_power",
> @@ -179,10 +172,13 @@ static struct vexpress_hwmon_type vexpress_hwmon_power = {
> static DEVICE_ATTR(energy1_label, S_IRUGO, vexpress_hwmon_label_show, NULL);
> static SENSOR_DEVICE_ATTR(energy1_input, S_IRUGO, vexpress_hwmon_u64_show,
> NULL, 1);
> -static VEXPRESS_HWMON_ATTRS(energy, energy1_label, energy1_input);
> static struct attribute_group vexpress_hwmon_group_energy = {
> .is_visible = vexpress_hwmon_attr_is_visible,
> - .attrs = vexpress_hwmon_attrs_energy,
> + .attrs = (struct attribute *[]) {
> + &dev_attr_energy1_label.attr,
> + &sensor_dev_attr_energy1_input.dev_attr.attr,
> + NULL
> + },
> };
> static struct vexpress_hwmon_type vexpress_hwmon_energy = {
> .name = "vexpress_energy",
> @@ -218,7 +214,6 @@ MODULE_DEVICE_TABLE(of, vexpress_hwmon_of_match);
>
> static int vexpress_hwmon_probe(struct platform_device *pdev)
> {
> - int err;
> const struct of_device_id *match;
> struct vexpress_hwmon_data *data;
> const struct vexpress_hwmon_type *type;
> @@ -232,45 +227,19 @@ static int vexpress_hwmon_probe(struct platform_device *pdev)
> if (!match)
> return -ENODEV;
> type = match->data;
> - data->name = type->name;
>
> data->reg = devm_regmap_init_vexpress_config(&pdev->dev);
> - if (!data->reg)
> - return -ENODEV;
> -
> - err = sysfs_create_groups(&pdev->dev.kobj, type->attr_groups);
> - if (err)
> - goto error;
> -
> - data->hwmon_dev = hwmon_device_register(&pdev->dev);
> - if (IS_ERR(data->hwmon_dev)) {
> - err = PTR_ERR(data->hwmon_dev);
> - goto error;
> - }
> + if (IS_ERR(data->reg))
> + return PTR_ERR(data->reg);
Did the API for devm_regmap_init_vexpress_config change ?
If so, it might make sense to separate this out into a separate patch,
together with the API change (it is a logically different change).
Otherwise looks good.
One question - I seem to be unable to apply the patch. What is your baseline branch / repository ?
Thanks,
Guenter
On Mon, 28 Apr 2014 13:02:28 -0500, Rob Herring <[email protected]> wrote:
> On Mon, Apr 28, 2014 at 12:57 PM, Pawel Moll <[email protected]> wrote:
> > In "Device Tree powered" systems, platform devices are usually
> > massively populated with of_platform_populate() call, executed
> > at some level of initcalls, either by generic architecture
> > or by platform-specific code.
> >
> > There are situations though where certain devices must be
> > created (and bound with drivers) before all the others.
> > This presents a challenge, as devices created explicitly
> > would be created again by of_platform_populate().
> >
> > This patch tries to solve that issue in a generic way,
> > adding a "populated" flag for a DT node description.
> > Once set, this device will never be created again via
> > of_* API, so of_platform_populate() will skip such nodes
> > (and its children) in a similar way to the non-available
> > ones.
> >
> > Cc: [email protected]
> > Signed-off-by: Pawel Moll <[email protected]>
> > ---
> > drivers/of/platform.c | 10 ++++++++--
> > include/linux/of.h | 1 +
> > 2 files changed, 9 insertions(+), 2 deletions(-)
> >
> > diff --git a/drivers/of/platform.c b/drivers/of/platform.c
> > index 404d1da..0ae757a 100644
> > --- a/drivers/of/platform.c
> > +++ b/drivers/of/platform.c
> > @@ -204,7 +204,8 @@ static struct platform_device *of_platform_device_create_pdata(
> > {
> > struct platform_device *dev;
> >
> > - if (!of_device_is_available(np))
> > + if (!of_device_is_available(np) ||
> > + of_node_check_flag(np, OF_POPULATED))
>
> This and the amba case should be a test_and_set operation to avoid a
> race condition.
Yes. It is an unlikely condition at the time that Pawel is handling, but
it should also work for later calls to of_platform_populate() which may
happen at runtime and in parallel.
g.
On Mon, Apr 28, 2014 at 06:57:49PM +0100, Pawel Moll wrote:
> Components of the Versatile Express platform (configuration
> microcontrollers on motherboard and daughterboards in particular)
> talk to each other over a custom configuration bus. They
> provide miscellaneous functions (from clock generator control
> to energy sensors) which are represented as platform devices
Acked-by: Mark Brown <[email protected]>
On Tue, 2014-04-29 at 13:56 +0100, Grant Likely wrote:
> > > diff --git a/drivers/of/platform.c b/drivers/of/platform.c
> > > index 404d1da..0ae757a 100644
> > > --- a/drivers/of/platform.c
> > > +++ b/drivers/of/platform.c
> > > @@ -204,7 +204,8 @@ static struct platform_device *of_platform_device_create_pdata(
> > > {
> > > struct platform_device *dev;
> > >
> > > - if (!of_device_is_available(np))
> > > + if (!of_device_is_available(np) ||
> > > + of_node_check_flag(np, OF_POPULATED))
> >
> > This and the amba case should be a test_and_set operation to avoid a
> > race condition.
>
> Yes. It is an unlikely condition at the time that Pawel is handling, but
> it should also work for later calls to of_platform_populate() which may
> happen at runtime and in parallel.
Sure thing, will fix.
Thanks!
Pawel
> Components of the Versatile Express platform (configuration
> microcontrollers on motherboard and daughterboards in particular)
> talk to each other over a custom configuration bus. They
> provide miscellaneous functions (from clock generator control
> to energy sensors) which are represented as platform devices
> (and Device Tree nodes). The transactions on the bus can
> be generated by different "bridges" in the system, some
> of which are universal for the whole platform (for the price
> of high transfer latencies), others restricted to a subsystem
> (but much faster).
>
> Until now drivers for such functions were using custom "func"
> API, which is being replaced in this patch by regmap calls.
> This required:
>
> * a rework (and move to drivers/bus directory, as suggested
> by Samuel and Arnd) of the config bus core, which is much
> simpler now and uses device model infrastructure (class)
> to keep track of the bridges; non-DT case (soon to be
> retired anyway) is simply covered by a special device
> registration function
>
> * the new config-bus driver also takes over device population,
> so there is no need for special matching table for
> of_platform_populate nor "simple-bus" hack in the arm64
> model dtsi file (relevant bindings documentation has
> been updated); this allows all the vexpress devices
> fit into normal device model, making it possible
> to remove plenty of early inits and other hacks in
> the near future
>
> * adaptation of the syscfg bridge implementation in the
> sysreg driver, again making it much simpler; there is
> a special case of the "energy" function spanning two
> registers, where they should be both defined in the tree
> now, but backward compatibility is maintained in the code
>
> * modification of the relevant drivers:
>
> * hwmon - just a straight-forward API change
> * power/reset driver - API change
> * regulator - API change plus error handling
> simplification
> * osc clock driver - this one required larger rework
> in order to turn in into a standard platform driver
>
> Cc: Jean Delvare <[email protected]>
> Cc: Guenter Roeck <[email protected]>
> Cc: [email protected]
> Cc: Mark Brown <[email protected]>
> Cc: Liam Girdwood <[email protected]>
> Cc: David Woodhouse <[email protected]>
> Cc: Dmitry Eremin-Solenikov <[email protected]>
> Cc: Mike Turquette <[email protected]>
> Signed-off-by: Pawel Moll <[email protected]>
> ---
> .../devicetree/bindings/arm/vexpress-sysreg.txt | 43 ++-
> Documentation/devicetree/bindings/arm/vexpress.txt | 15 +-
> arch/arm/boot/dts/vexpress-v2p-ca15_a7.dts | 5 +-
> arch/arm/mach-vexpress/ct-ca9x4.c | 10 +-
> arch/arm/mach-vexpress/v2m.c | 18 +-
> arch/arm64/boot/dts/rtsm_ve-motherboard.dtsi | 2 +-
> drivers/bus/Kconfig | 9 +
> drivers/bus/Makefile | 2 +
> drivers/bus/vexpress-config.c | 202 +++++++++++
> drivers/clk/versatile/clk-vexpress-osc.c | 94 +++--
> drivers/hwmon/vexpress.c | 15 +-
> drivers/mfd/Makefile | 2 +-
> drivers/mfd/vexpress-config.c | 287 ---------------
> drivers/mfd/vexpress-sysreg.c | 395 +++++++++++----------
> drivers/power/reset/vexpress-poweroff.c | 16 +-
> drivers/regulator/vexpress.c | 50 +--
> include/linux/vexpress.h | 79 +----
> 17 files changed, 567 insertions(+), 677 deletions(-)
> create mode 100644 drivers/bus/vexpress-config.c
> delete mode 100644 drivers/mfd/vexpress-config.c
Blimey!
MFD diffstat looks great and the changes look sensible:
Acked-by: Lee Jones <[email protected]>
I guess someone will need to create a branch for us all to pull from.
I'm happy to do it if needs be.
--
Lee Jones
Linaro STMicroelectronics Landing Team Lead
Linaro.org │ Open source software for ARM SoCs
Follow Linaro: Facebook | Twitter | Blog
> The last reason for static memory mapping is the HBI (board
> identification number) check early in the machine code.
>
> Moving the check to the sysreg driver makes it possible to
> completely remove the early mapping and init functions.
>
> Signed-off-by: Pawel Moll <[email protected]>
> ---
> arch/arm/mach-vexpress/v2m.c | 49 -------------------------------------------
> drivers/mfd/vexpress-sysreg.c | 30 ++++++++++----------------
> include/linux/vexpress.h | 1 -
> 3 files changed, 11 insertions(+), 69 deletions(-)
Acked-by: Lee Jones <[email protected]>
How do you want this patch handled?
--
Lee Jones
Linaro STMicroelectronics Landing Team Lead
Linaro.org │ Open source software for ARM SoCs
Follow Linaro: Facebook | Twitter | Blog
On Wed, 2014-04-30 at 14:58 +0100, Lee Jones wrote:
> MFD diffstat looks great and the changes look sensible:
> Acked-by: Lee Jones <[email protected]>
Thanks!
> I guess someone will need to create a branch for us all to pull from.
> I'm happy to do it if needs be.
I was thinking that, with enough acks (and I'm counting on one from you
for "[PATCH 04/10] mfd: vexpress: Define the device as MFD cells" :-),
merging the whole series (or at least patches 1-4 and 7-8) through
arm-soc tree would be the simplest option. I have no problem with the
independent bits (clk, clocksource, hwmon and the mfd/HBI change) going
through appropriate subsystems.
Paweł
> > MFD diffstat looks great and the changes look sensible:
> > Acked-by: Lee Jones <[email protected]>
>
> Thanks!
>
> > I guess someone will need to create a branch for us all to pull from.
> > I'm happy to do it if needs be.
>
> I was thinking that, with enough acks (and I'm counting on one from you
> for "[PATCH 04/10] mfd: vexpress: Define the device as MFD cells" :-),
That won't happen right away - it's another 500+ line patch and
contary to popular believe I do have my own work to contend with too.
> merging the whole series (or at least patches 1-4 and 7-8) through
> arm-soc tree would be the simplest option. I have no problem with the
> independent bits (clk, clocksource, hwmon and the mfd/HBI change) going
> through appropriate subsystems.
I have no problem with that as long as one of the ARM-SoC guys can
provide a branch where the other subsystems can pull from. If they
have no time, my offer still stands.
--
Lee Jones
Linaro STMicroelectronics Landing Team Lead
Linaro.org │ Open source software for ARM SoCs
Follow Linaro: Facebook | Twitter | Blog
On Wed, 2014-04-30 at 15:29 +0100, Lee Jones wrote:
> > > MFD diffstat looks great and the changes look sensible:
> > > Acked-by: Lee Jones <[email protected]>
> >
> > Thanks!
> >
> > > I guess someone will need to create a branch for us all to pull from.
> > > I'm happy to do it if needs be.
> >
> > I was thinking that, with enough acks (and I'm counting on one from you
> > for "[PATCH 04/10] mfd: vexpress: Define the device as MFD cells" :-),
>
> That won't happen right away - it's another 500+ line patch and
> contary to popular believe I do have my own work to contend with too.
Didn't expect it today :-)
> > merging the whole series (or at least patches 1-4 and 7-8) through
> > arm-soc tree would be the simplest option. I have no problem with the
> > independent bits (clk, clocksource, hwmon and the mfd/HBI change) going
> > through appropriate subsystems.
>
> I have no problem with that as long as one of the ARM-SoC guys can
> provide a branch where the other subsystems can pull from. If they
> have no time, my offer still stands.
Appreciate this, thanks!
Pawel
On Mon, 2014-04-28 at 23:59 +0100, Guenter Roeck wrote:
> On 04/28/2014 10:uct attribute_group **attr_groups;
> > @@ -114,10 +95,13 @@ struct vexpress_hwmon_type {
> > static DEVICE_ATTR(in1_label, S_IRUGO, vexpress_hwmon_label_show, NULL);
> > static SENSOR_DEVICE_ATTR(in1_input, S_IRUGO, vexpress_hwmon_u32_show,
> > NULL, 1000);
> > -static VEXPRESS_HWMON_ATTRS(volt, in1_label, in1_input);
> > static struct attribute_group vexpress_hwmon_group_volt = {
> > .is_visible = vexpress_hwmon_attr_is_visible,
> > - .attrs = vexpress_hwmon_attrs_volt,
> > + .attrs = (struct attribute *[]) {
>
> Is this typecast necessary ?
Yes, it's the gcc extension that allows compound literals to be used for
static structure members initialization. I like it, because it makes
them easier to understand (in my opinion, that is), but if you prefer
the classic approach, I'll unroll VEXPRESS_HWMON_ATTRS into:
static struct attribute vexpress_hwmon_attrs_volt = {
&dev_attr_in1_label.attr,
&sensor_dev_attr_in1_input.dev_attr.attr,
NULL
};
And keep
static struct attribute_group vexpress_hwmon_group_volt = {
.is_visible = vexpress_hwmon_attr_is_visible,
.attrs = vexpress_hwmon_attrs_volt,
};
> > @@ -232,45 +227,19 @@ static int vexpress_hwmon_probe(struct platform_device *pdev)
> > if (!match)
> > return -ENODEV;
> > type = match->data;
> > - data->name = type->name;
> >
> > data->reg = devm_regmap_init_vexpress_config(&pdev->dev);
> > - if (!data->reg)
> > - return -ENODEV;
> > -
> > - err = sysfs_create_groups(&pdev->dev.kobj, type->attr_groups);
> > - if (err)
> > - goto error;
> > -
> > - data->hwmon_dev = hwmon_device_register(&pdev->dev);
> > - if (IS_ERR(data->hwmon_dev)) {
> > - err = PTR_ERR(data->hwmon_dev);
> > - goto error;
> > - }
> > + if (IS_ERR(data->reg))
> > + return PTR_ERR(data->reg);
>
> Did the API for devm_regmap_init_vexpress_config change ?
> If so, it might make sense to separate this out into a separate patch,
> together with the API change (it is a logically different change).
I'm not sure I understand the question. The other patch from the series
I've copied you on
(http://article.gmane.org/gmane.linux.ports.arm.kernel/320577 "[PATCH
02/10] mfd: vexpress: Convert custom func API to regmap") changes
- data->func = vexpress_config_func_get_by_dev(&pdev->dev);
into
+ data->reg = devm_regmap_init_vexpress_config(&pdev->dev);
Your ack there, by the way, will be really appreciated :-)
> One question - I seem to be unable to apply the patch. What is your
> baseline branch / repository ?
The whole series, based on v3.15-rc3 lives here:
git://git.linaro.org/people/pawel.moll/linux.git vexpress/sysreg
Pawel
On Wed, Apr 30, 2014 at 04:16:19PM +0100, Pawel Moll wrote:
> On Mon, 2014-04-28 at 23:59 +0100, Guenter Roeck wrote:
> > On 04/28/2014 10:uct attribute_group **attr_groups;
> > > @@ -114,10 +95,13 @@ struct vexpress_hwmon_type {
> > > static DEVICE_ATTR(in1_label, S_IRUGO, vexpress_hwmon_label_show, NULL);
> > > static SENSOR_DEVICE_ATTR(in1_input, S_IRUGO, vexpress_hwmon_u32_show,
> > > NULL, 1000);
> > > -static VEXPRESS_HWMON_ATTRS(volt, in1_label, in1_input);
> > > static struct attribute_group vexpress_hwmon_group_volt = {
> > > .is_visible = vexpress_hwmon_attr_is_visible,
> > > - .attrs = vexpress_hwmon_attrs_volt,
> > > + .attrs = (struct attribute *[]) {
> >
> > Is this typecast necessary ?
>
> Yes, it's the gcc extension that allows compound literals to be used for
> static structure members initialization. I like it, because it makes
> them easier to understand (in my opinion, that is), but if you prefer
> the classic approach, I'll unroll VEXPRESS_HWMON_ATTRS into:
>
> static struct attribute vexpress_hwmon_attrs_volt = {
> &dev_attr_in1_label.attr,
> &sensor_dev_attr_in1_input.dev_attr.attr,
> NULL
> };
>
> And keep
>
> static struct attribute_group vexpress_hwmon_group_volt = {
> .is_visible = vexpress_hwmon_attr_is_visible,
> .attrs = vexpress_hwmon_attrs_volt,
> };
>
Yes, would be great if you can do that.
> > > @@ -232,45 +227,19 @@ static int vexpress_hwmon_probe(struct platform_device *pdev)
> > > if (!match)
> > > return -ENODEV;
> > > type = match->data;
> > > - data->name = type->name;
> > >
> > > data->reg = devm_regmap_init_vexpress_config(&pdev->dev);
> > > - if (!data->reg)
> > > - return -ENODEV;
> > > -
> > > - err = sysfs_create_groups(&pdev->dev.kobj, type->attr_groups);
> > > - if (err)
> > > - goto error;
> > > -
> > > - data->hwmon_dev = hwmon_device_register(&pdev->dev);
> > > - if (IS_ERR(data->hwmon_dev)) {
> > > - err = PTR_ERR(data->hwmon_dev);
> > > - goto error;
> > > - }
> > > + if (IS_ERR(data->reg))
> > > + return PTR_ERR(data->reg);
> >
> > Did the API for devm_regmap_init_vexpress_config change ?
> > If so, it might make sense to separate this out into a separate patch,
> > together with the API change (it is a logically different change).
>
> I'm not sure I understand the question. The other patch from the series
The code above seems to change from
data->reg = devm_regmap_init_vexpress_config(&pdev->dev);
if (!data->reg)
return -ENODEV;
to
data->reg = devm_regmap_init_vexpress_config(&pdev->dev);
if (IS_ERR(data->reg))
return PTR_ERR(data->reg);
as part of this patch. This suggests that the return value from
devm_regmap_init_vexpress_config may have changed from NULL to
ERR_PTR. Is my understanding wrong ?
> I've copied you on
> (http://article.gmane.org/gmane.linux.ports.arm.kernel/320577 "[PATCH
> 02/10] mfd: vexpress: Convert custom func API to regmap") changes
>
> - data->func = vexpress_config_func_get_by_dev(&pdev->dev);
>
> into
>
> + data->reg = devm_regmap_init_vexpress_config(&pdev->dev);
>
> Your ack there, by the way, will be really appreciated :-)
>
I'll have a look.
> > One question - I seem to be unable to apply the patch. What is your
> > baseline branch / repository ?
>
> The whole series, based on v3.15-rc3 lives here:
>
> git://git.linaro.org/people/pawel.moll/linux.git vexpress/sysreg
>
Great, thanks.
Guenter
On Wed, 2014-04-30 at 16:27 +0100, Guenter Roeck wrote:
> > I'm not sure I understand the question. The other patch from the series
>
> The code above seems to change from
>
> data->reg = devm_regmap_init_vexpress_config(&pdev->dev);
> if (!data->reg)
> return -ENODEV;
>
> to
>
> data->reg = devm_regmap_init_vexpress_config(&pdev->dev);
> if (IS_ERR(data->reg))
> return PTR_ERR(data->reg);
>
> as part of this patch. This suggests that the return value from
> devm_regmap_init_vexpress_config may have changed from NULL to
> ERR_PTR. Is my understanding wrong ?
No, you've got it right, but it's me making a mistake in patch splitting
- it is supposed to be a part of the first patch. Thanks for spotting
this!
Pawel
Components of the Versatile Express platform (configuration
microcontrollers on motherboard and daughterboards in particular)
talk to each other over a custom configuration bus. They
provide miscellaneous functions (from clock generator control
to energy sensors) which are represented as platform devices
(and Device Tree nodes). The transactions on the bus can
be generated by different "bridges" in the system, some
of which are universal for the whole platform (for the price
of high transfer latencies), others restricted to a subsystem
(but much faster).
Until now drivers for such functions were using custom "func"
API, which is being replaced in this patch by regmap calls.
This required:
* a rework (and move to drivers/bus directory, as suggested
by Samuel and Arnd) of the config bus core, which is much
simpler now and uses device model infrastructure (class)
to keep track of the bridges; non-DT case (soon to be
retired anyway) is simply covered by a special device
registration function
* the new config-bus driver also takes over device population,
so there is no need for special matching table for
of_platform_populate nor "simple-bus" hack in the arm64
model dtsi file (relevant bindings documentation has
been updated); this allows all the vexpress devices
fit into normal device model, making it possible
to remove plenty of early inits and other hacks in
the near future
* adaptation of the syscfg bridge implementation in the
sysreg driver, again making it much simpler; there is
a special case of the "energy" function spanning two
registers, where they should be both defined in the tree
now, but backward compatibility is maintained in the code
* modification of the relevant drivers:
* hwmon - just a straight-forward API change
* power/reset driver - API change
* regulator - API change plus error handling
simplification
* osc clock driver - this one required larger rework
in order to turn in into a standard platform driver
Signed-off-by: Pawel Moll <[email protected]>
Acked-by: Mark Brown <[email protected]>
Acked-by: Lee Jones <[email protected]>
---
Changes since v1:
- fixed devm_regmap_init_() return value handling
in hwmon driver (spotted by Guenter)
.../devicetree/bindings/arm/vexpress-sysreg.txt | 43 ++-
Documentation/devicetree/bindings/arm/vexpress.txt | 15 +-
arch/arm/boot/dts/vexpress-v2p-ca15_a7.dts | 5 +-
arch/arm/mach-vexpress/ct-ca9x4.c | 10 +-
arch/arm/mach-vexpress/v2m.c | 18 +-
arch/arm64/boot/dts/rtsm_ve-motherboard.dtsi | 2 +-
drivers/bus/Kconfig | 9 +
drivers/bus/Makefile | 2 +
drivers/bus/vexpress-config.c | 202 +++++++++++
drivers/clk/versatile/clk-vexpress-osc.c | 94 +++--
drivers/hwmon/vexpress.c | 17 +-
drivers/mfd/Makefile | 2 +-
drivers/mfd/vexpress-config.c | 287 ---------------
drivers/mfd/vexpress-sysreg.c | 395 +++++++++++----------
drivers/power/reset/vexpress-poweroff.c | 16 +-
drivers/regulator/vexpress.c | 50 +--
include/linux/vexpress.h | 79 +----
17 files changed, 568 insertions(+), 678 deletions(-)
create mode 100644 drivers/bus/vexpress-config.c
delete mode 100644 drivers/mfd/vexpress-config.c
diff --git a/Documentation/devicetree/bindings/arm/vexpress-sysreg.txt b/Documentation/devicetree/bindings/arm/vexpress-sysreg.txt
index 5580e9c..57b423f 100644
--- a/Documentation/devicetree/bindings/arm/vexpress-sysreg.txt
+++ b/Documentation/devicetree/bindings/arm/vexpress-sysreg.txt
@@ -27,24 +27,45 @@ Example:
This block also can also act a bridge to the platform's configuration
bus via "system control" interface, addressing devices with site number,
position in the board stack, config controller, function and device
-numbers - see motherboard's TRM for more details.
-
-The node describing a config device must refer to the sysreg node via
-"arm,vexpress,config-bridge" phandle (can be also defined in the node's
-parent) and relies on the board topology properties - see main vexpress
-node documentation for more details. It must also define the following
-property:
-- arm,vexpress-sysreg,func : must contain two cells:
- - first cell defines function number (eg. 1 for clock generator,
- 2 for voltage regulators etc.)
- - device number (eg. osc 0, osc 1 etc.)
+numbers - see motherboard's TRM for more details. All configuration
+controller accessible via this interface must reference the sysreg
+node via "arm,vexpress,config-bridge" phandle and define appropriate
+topology properties - see main vexpress node documentation for more
+details. Each child of such node describes one function and must
+define the following properties:
+- compatible value : must be one of (corresponding to the TRM):
+ "arm,vexpress-amp"
+ "arm,vexpress-dvimode"
+ "arm,vexpress-energy"
+ "arm,vexpress-muxfpga"
+ "arm,vexpress-osc"
+ "arm,vexpress-power"
+ "arm,vexpress-reboot"
+ "arm,vexpress-reset"
+ "arm,vexpress-scc"
+ "arm,vexpress-shutdown"
+ "arm,vexpress-temp"
+ "arm,vexpress-volt"
+- arm,vexpress-sysreg,func : must contain a set of two cells long groups:
+ - first cell of each group defines the function number
+ (eg. 1 for clock generator, 2 for voltage regulators etc.)
+ - second cell of each group defines device number (eg. osc 0,
+ osc 1 etc.)
+ - some functions (eg. energy meter, with its 64 bit long counter)
+ are using more than one function/device number pair
Example:
mcc {
+ compatible = "arm,vexpress,config-bus";
arm,vexpress,config-bridge = <&v2m_sysreg>;
osc@0 {
compatible = "arm,vexpress-osc";
arm,vexpress-sysreg,func = <1 0>;
};
+
+ energy@0 {
+ compatible = "arm,vexpress-energy";
+ arm,vexpress-sysreg,func = <13 0>, <13 1>;
+ };
};
diff --git a/Documentation/devicetree/bindings/arm/vexpress.txt b/Documentation/devicetree/bindings/arm/vexpress.txt
index ae49161..39844cd 100644
--- a/Documentation/devicetree/bindings/arm/vexpress.txt
+++ b/Documentation/devicetree/bindings/arm/vexpress.txt
@@ -80,12 +80,17 @@ but also control clock generators, voltage regulators, gather
environmental data like temperature, power consumption etc. Even
the video output switch (FPGA) is controlled that way.
-Nodes describing devices controlled by this infrastructure should
-point at the bridge device node:
+The controllers are not mapped into normal memory address space
+and must be accessed through bridges - other devices capable
+of generating transactions on the configuration bus.
+
+The nodes describing configuration controllers must define
+the following properties:
+- compatible value:
+ compatible = "arm,vexpress,config-bus";
- bridge phandle:
arm,vexpress,config-bridge = <phandle>;
-This property can be also defined in a parent node (eg. for a DCC)
-and is effective for all children.
+and children describing available functions.
Platform topology
@@ -197,7 +202,7 @@ Example of a VE tile description (simplified)
};
dcc {
- compatible = "simple-bus";
+ compatible = "arm,vexpress,config-bus";
arm,vexpress,config-bridge = <&v2m_sysreg>;
osc@0 {
diff --git a/arch/arm/boot/dts/vexpress-v2p-ca15_a7.dts b/arch/arm/boot/dts/vexpress-v2p-ca15_a7.dts
index 15f98cb..a25c262 100644
--- a/arch/arm/boot/dts/vexpress-v2p-ca15_a7.dts
+++ b/arch/arm/boot/dts/vexpress-v2p-ca15_a7.dts
@@ -312,6 +312,7 @@
arm,vexpress-sysreg,func = <12 0>;
label = "A15 Pcore";
};
+
power@1 {
/* Total power for the three A7 cores */
compatible = "arm,vexpress-power";
@@ -322,14 +323,14 @@
energy@0 {
/* Total energy for the two A15 cores */
compatible = "arm,vexpress-energy";
- arm,vexpress-sysreg,func = <13 0>;
+ arm,vexpress-sysreg,func = <13 0>, <13 1>;
label = "A15 Jcore";
};
energy@2 {
/* Total energy for the three A7 cores */
compatible = "arm,vexpress-energy";
- arm,vexpress-sysreg,func = <13 2>;
+ arm,vexpress-sysreg,func = <13 2>, <13 3>;
label = "A7 Jcore";
};
};
diff --git a/arch/arm/mach-vexpress/ct-ca9x4.c b/arch/arm/mach-vexpress/ct-ca9x4.c
index 6f34497..35e394a 100644
--- a/arch/arm/mach-vexpress/ct-ca9x4.c
+++ b/arch/arm/mach-vexpress/ct-ca9x4.c
@@ -128,6 +128,10 @@ static struct platform_device pmu_device = {
.resource = pmu_resources,
};
+static struct clk_lookup osc1_lookup = {
+ .dev_id = "ct:clcd",
+};
+
static struct platform_device osc1_device = {
.name = "vexpress-osc",
.id = 1,
@@ -135,6 +139,7 @@ static struct platform_device osc1_device = {
.resource = (struct resource []) {
VEXPRESS_RES_FUNC(0xf, 1),
},
+ .dev.platform_data = &osc1_lookup,
};
static void __init ct_ca9x4_init(void)
@@ -155,10 +160,7 @@ static void __init ct_ca9x4_init(void)
amba_device_register(ct_ca9x4_amba_devs[i], &iomem_resource);
platform_device_register(&pmu_device);
- platform_device_register(&osc1_device);
-
- WARN_ON(clk_register_clkdev(vexpress_osc_setup(&osc1_device.dev),
- NULL, "ct:clcd"));
+ vexpress_sysreg_config_device_register(&osc1_device);
}
#ifdef CONFIG_SMP
diff --git a/arch/arm/mach-vexpress/v2m.c b/arch/arm/mach-vexpress/v2m.c
index 4f8b8cb..ac95220 100644
--- a/arch/arm/mach-vexpress/v2m.c
+++ b/arch/arm/mach-vexpress/v2m.c
@@ -340,11 +340,6 @@ static void __init v2m_init(void)
regulator_register_fixed(0, v2m_eth_supplies,
ARRAY_SIZE(v2m_eth_supplies));
- platform_device_register(&v2m_muxfpga_device);
- platform_device_register(&v2m_shutdown_device);
- platform_device_register(&v2m_reboot_device);
- platform_device_register(&v2m_dvimode_device);
-
platform_device_register(&v2m_sysreg_device);
platform_device_register(&v2m_pcie_i2c_device);
platform_device_register(&v2m_ddc_i2c_device);
@@ -356,6 +351,11 @@ static void __init v2m_init(void)
for (i = 0; i < ARRAY_SIZE(v2m_amba_devs); i++)
amba_device_register(v2m_amba_devs[i], &iomem_resource);
+ vexpress_sysreg_config_device_register(&v2m_muxfpga_device);
+ vexpress_sysreg_config_device_register(&v2m_shutdown_device);
+ vexpress_sysreg_config_device_register(&v2m_reboot_device);
+ vexpress_sysreg_config_device_register(&v2m_dvimode_device);
+
ct_desc->init_tile();
}
@@ -423,17 +423,11 @@ void __init v2m_dt_init_early(void)
versatile_sched_clock_init(vexpress_get_24mhz_clock_base(), 24000000);
}
-static const struct of_device_id v2m_dt_bus_match[] __initconst = {
- { .compatible = "simple-bus", },
- { .compatible = "arm,amba-bus", },
- { .compatible = "arm,vexpress,config-bus", },
- {}
-};
static void __init v2m_dt_init(void)
{
l2x0_of_init(0x00400000, 0xfe0fffff);
- of_platform_populate(NULL, v2m_dt_bus_match, NULL, NULL);
+ of_platform_populate(NULL, of_default_bus_match_table, NULL, NULL);
}
static const char * const v2m_dt_match[] __initconst = {
diff --git a/arch/arm64/boot/dts/rtsm_ve-motherboard.dtsi b/arch/arm64/boot/dts/rtsm_ve-motherboard.dtsi
index 2f2ecd2..ac2cb24 100644
--- a/arch/arm64/boot/dts/rtsm_ve-motherboard.dtsi
+++ b/arch/arm64/boot/dts/rtsm_ve-motherboard.dtsi
@@ -200,7 +200,7 @@
};
mcc {
- compatible = "arm,vexpress,config-bus", "simple-bus";
+ compatible = "arm,vexpress,config-bus";
arm,vexpress,config-bridge = <&v2m_sysreg>;
v2m_oscclk1: osc@1 {
diff --git a/drivers/bus/Kconfig b/drivers/bus/Kconfig
index 552373c..f24e79d 100644
--- a/drivers/bus/Kconfig
+++ b/drivers/bus/Kconfig
@@ -41,4 +41,13 @@ config ARM_CCI
help
Driver supporting the CCI cache coherent interconnect for ARM
platforms.
+
+config VEXPRESS_CONFIG
+ bool "Versatile Express configuration bus"
+ default y if ARCH_VEXPRESS
+ depends on ARM || ARM64
+ select REGMAP
+ help
+ Platform configuration infrastructure for the ARM Ltd.
+ Versatile Express.
endmenu
diff --git a/drivers/bus/Makefile b/drivers/bus/Makefile
index 8947bdd..f095aa7 100644
--- a/drivers/bus/Makefile
+++ b/drivers/bus/Makefile
@@ -10,3 +10,5 @@ obj-$(CONFIG_OMAP_OCP2SCP) += omap-ocp2scp.o
obj-$(CONFIG_OMAP_INTERCONNECT) += omap_l3_smx.o omap_l3_noc.o
# CCI cache coherent interconnect for ARM platforms
obj-$(CONFIG_ARM_CCI) += arm-cci.o
+
+obj-$(CONFIG_VEXPRESS_CONFIG) += vexpress-config.o
diff --git a/drivers/bus/vexpress-config.c b/drivers/bus/vexpress-config.c
new file mode 100644
index 0000000..27a07df
--- /dev/null
+++ b/drivers/bus/vexpress-config.c
@@ -0,0 +1,202 @@
+/*
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * Copyright (C) 2014 ARM Limited
+ */
+
+#include <linux/err.h>
+#include <linux/init.h>
+#include <linux/of.h>
+#include <linux/of_device.h>
+#include <linux/vexpress.h>
+
+
+struct vexpress_config_bridge {
+ struct vexpress_config_bridge_ops *ops;
+ void *context;
+};
+
+
+static DEFINE_MUTEX(vexpress_config_mutex);
+static struct class *vexpress_config_class;
+static u32 vexpress_config_site_master = VEXPRESS_SITE_MASTER;
+
+
+void vexpress_config_set_master(u32 site)
+{
+ vexpress_config_site_master = site;
+}
+
+u32 vexpress_config_get_master(void)
+{
+ return vexpress_config_site_master;
+}
+
+void vexpress_config_lock(void *arg)
+{
+ mutex_lock(&vexpress_config_mutex);
+}
+
+void vexpress_config_unlock(void *arg)
+{
+ mutex_unlock(&vexpress_config_mutex);
+}
+
+
+static void vexpress_config_find_prop(struct device_node *node,
+ const char *name, u32 *val)
+{
+ /* Default value */
+ *val = 0;
+
+ of_node_get(node);
+ while (node) {
+ if (of_property_read_u32(node, name, val) == 0) {
+ of_node_put(node);
+ return;
+ }
+ node = of_get_next_parent(node);
+ }
+}
+
+int vexpress_config_get_topo(struct device_node *node, u32 *site,
+ u32 *position, u32 *dcc)
+{
+ vexpress_config_find_prop(node, "arm,vexpress,site", site);
+ if (*site == VEXPRESS_SITE_MASTER)
+ *site = vexpress_config_site_master;
+ if (WARN_ON(vexpress_config_site_master == VEXPRESS_SITE_MASTER))
+ return -EINVAL;
+ vexpress_config_find_prop(node, "arm,vexpress,position", position);
+ vexpress_config_find_prop(node, "arm,vexpress,dcc", dcc);
+
+ return 0;
+}
+
+
+static void vexpress_config_devres_release(struct device *dev, void *res)
+{
+ struct vexpress_config_bridge *bridge = dev_get_drvdata(dev->parent);
+ struct regmap *regmap = res;
+
+ bridge->ops->regmap_exit(regmap, bridge->context);
+}
+
+struct regmap *devm_regmap_init_vexpress_config(struct device *dev)
+{
+ struct vexpress_config_bridge *bridge;
+ struct regmap *regmap;
+ struct regmap **res;
+
+ if (WARN_ON(dev->parent->class != vexpress_config_class))
+ return ERR_PTR(-ENODEV);
+
+ bridge = dev_get_drvdata(dev->parent);
+ if (WARN_ON(!bridge))
+ return ERR_PTR(-EINVAL);
+
+ res = devres_alloc(vexpress_config_devres_release, sizeof(*res),
+ GFP_KERNEL);
+ if (!res)
+ return ERR_PTR(-ENOMEM);
+
+ regmap = bridge->ops->regmap_init(dev, bridge->context);
+ if (IS_ERR(regmap)) {
+ devres_free(res);
+ return regmap;
+ }
+
+ *res = regmap;
+ devres_add(dev, res);
+
+ return regmap;
+}
+
+
+struct device *vexpress_config_bridge_register(struct device *parent,
+ struct vexpress_config_bridge_ops *ops, void *context)
+{
+ struct device *dev;
+ struct vexpress_config_bridge *bridge;
+
+ if (!vexpress_config_class) {
+ vexpress_config_class = class_create(THIS_MODULE,
+ "vexpress-config");
+ if (IS_ERR(vexpress_config_class))
+ return (void *)vexpress_config_class;
+ }
+
+ dev = device_create(vexpress_config_class, parent, 0,
+ NULL, "%s.bridge", dev_name(parent));
+
+ if (IS_ERR(dev))
+ return dev;
+
+ bridge = devm_kmalloc(dev, sizeof(*bridge), GFP_KERNEL);
+ if (!bridge) {
+ put_device(dev);
+ device_unregister(dev);
+ return ERR_PTR(-ENOMEM);
+ }
+ bridge->ops = ops;
+ bridge->context = context;
+
+ dev_set_drvdata(dev, bridge);
+
+ dev_dbg(parent, "Registered bridge '%s', parent node %p\n",
+ dev_name(dev), parent->of_node);
+
+ return dev;
+}
+
+
+static int vexpress_config_node_match(struct device *dev, const void *data)
+{
+ const struct device_node *node = data;
+
+ dev_dbg(dev, "Parent node %p, looking for %p\n",
+ dev->parent->of_node, node);
+
+ return dev->parent->of_node == node;
+}
+
+static int vexpress_config_populate(struct device_node *node)
+{
+ struct device_node *bridge;
+ struct device *parent;
+
+ bridge = of_parse_phandle(node, "arm,vexpress,config-bridge", 0);
+ if (!bridge)
+ return -EINVAL;
+
+ parent = class_find_device(vexpress_config_class, NULL, bridge,
+ vexpress_config_node_match);
+ if (WARN_ON(!parent))
+ return -ENODEV;
+
+ return of_platform_populate(node, NULL, NULL, parent);
+}
+
+static int __init vexpress_config_init(void)
+{
+ int err = 0;
+ struct device_node *node;
+
+ /* Need the config devices early, before the "normal" devices... */
+ for_each_compatible_node(node, NULL, "arm,vexpress,config-bus") {
+ err = vexpress_config_populate(node);
+ if (err)
+ break;
+ }
+
+ return err;
+}
+postcore_initcall(vexpress_config_init);
+
diff --git a/drivers/clk/versatile/clk-vexpress-osc.c b/drivers/clk/versatile/clk-vexpress-osc.c
index a535c7b..529a59c 100644
--- a/drivers/clk/versatile/clk-vexpress-osc.c
+++ b/drivers/clk/versatile/clk-vexpress-osc.c
@@ -11,8 +11,6 @@
* Copyright (C) 2012 ARM Limited
*/
-#define pr_fmt(fmt) "vexpress-osc: " fmt
-
#include <linux/clkdev.h>
#include <linux/clk-provider.h>
#include <linux/err.h>
@@ -22,7 +20,7 @@
#include <linux/vexpress.h>
struct vexpress_osc {
- struct vexpress_config_func *func;
+ struct regmap *reg;
struct clk_hw hw;
unsigned long rate_min;
unsigned long rate_max;
@@ -36,7 +34,7 @@ static unsigned long vexpress_osc_recalc_rate(struct clk_hw *hw,
struct vexpress_osc *osc = to_vexpress_osc(hw);
u32 rate;
- vexpress_config_read(osc->func, 0, &rate);
+ regmap_read(osc->reg, 0, &rate);
return rate;
}
@@ -60,7 +58,7 @@ static int vexpress_osc_set_rate(struct clk_hw *hw, unsigned long rate,
{
struct vexpress_osc *osc = to_vexpress_osc(hw);
- return vexpress_config_write(osc->func, 0, rate);
+ return regmap_write(osc->reg, 0, rate);
}
static struct clk_ops vexpress_osc_ops = {
@@ -70,56 +68,31 @@ static struct clk_ops vexpress_osc_ops = {
};
-struct clk * __init vexpress_osc_setup(struct device *dev)
-{
- struct clk_init_data init;
- struct vexpress_osc *osc = kzalloc(sizeof(*osc), GFP_KERNEL);
-
- if (!osc)
- return NULL;
-
- osc->func = vexpress_config_func_get_by_dev(dev);
- if (!osc->func) {
- kfree(osc);
- return NULL;
- }
-
- init.name = dev_name(dev);
- init.ops = &vexpress_osc_ops;
- init.flags = CLK_IS_ROOT;
- init.num_parents = 0;
- osc->hw.init = &init;
-
- return clk_register(NULL, &osc->hw);
-}
-
-void __init vexpress_osc_of_setup(struct device_node *node)
+static int vexpress_osc_probe(struct platform_device *pdev)
{
+ struct clk_lookup *cl = pdev->dev.platform_data; /* Non-DT lookup */
struct clk_init_data init;
struct vexpress_osc *osc;
struct clk *clk;
u32 range[2];
- osc = kzalloc(sizeof(*osc), GFP_KERNEL);
+ osc = devm_kzalloc(&pdev->dev, sizeof(*osc), GFP_KERNEL);
if (!osc)
- return;
+ return -ENOMEM;
- osc->func = vexpress_config_func_get_by_node(node);
- if (!osc->func) {
- pr_err("Failed to obtain config func for node '%s'!\n",
- node->full_name);
- goto error;
- }
+ osc->reg = devm_regmap_init_vexpress_config(&pdev->dev);
+ if (IS_ERR(osc->reg))
+ return PTR_ERR(osc->reg);
- if (of_property_read_u32_array(node, "freq-range", range,
+ if (of_property_read_u32_array(pdev->dev.of_node, "freq-range", range,
ARRAY_SIZE(range)) == 0) {
osc->rate_min = range[0];
osc->rate_max = range[1];
}
- of_property_read_string(node, "clock-output-names", &init.name);
- if (!init.name)
- init.name = node->full_name;
+ if (of_property_read_string(pdev->dev.of_node, "clock-output-names",
+ &init.name) != 0)
+ init.name = dev_name(&pdev->dev);
init.ops = &vexpress_osc_ops;
init.flags = CLK_IS_ROOT;
@@ -128,20 +101,37 @@ void __init vexpress_osc_of_setup(struct device_node *node)
osc->hw.init = &init;
clk = clk_register(NULL, &osc->hw);
- if (IS_ERR(clk)) {
- pr_err("Failed to register clock '%s'!\n", init.name);
- goto error;
+ if (IS_ERR(clk))
+ return PTR_ERR(clk);
+
+ of_clk_add_provider(pdev->dev.of_node, of_clk_src_simple_get, clk);
+
+ /* Only happens for non-DT cases */
+ if (cl) {
+ cl->clk = clk;
+ clkdev_add(cl);
}
- of_clk_add_provider(node, of_clk_src_simple_get, clk);
+ dev_dbg(&pdev->dev, "Registered clock '%s'\n", init.name);
- pr_debug("Registered clock '%s'\n", init.name);
+ return 0;
+}
- return;
+static struct of_device_id vexpress_osc_of_match[] = {
+ { .compatible = "arm,vexpress-osc", },
+ {}
+};
-error:
- if (osc->func)
- vexpress_config_func_put(osc->func);
- kfree(osc);
+static struct platform_driver vexpress_osc_driver = {
+ .driver = {
+ .name = "vexpress-osc",
+ .of_match_table = vexpress_osc_of_match,
+ },
+ .probe = vexpress_osc_probe,
+};
+
+static int __init vexpress_osc_init(void)
+{
+ return platform_driver_register(&vexpress_osc_driver);
}
-CLK_OF_DECLARE(vexpress_soc, "arm,vexpress-osc", vexpress_osc_of_setup);
+core_initcall(vexpress_osc_init);
diff --git a/drivers/hwmon/vexpress.c b/drivers/hwmon/vexpress.c
index 8242b75..611f34c 100644
--- a/drivers/hwmon/vexpress.c
+++ b/drivers/hwmon/vexpress.c
@@ -26,7 +26,7 @@
struct vexpress_hwmon_data {
struct device *hwmon_dev;
- struct vexpress_config_func *func;
+ struct regmap *reg;
const char *name;
};
@@ -53,7 +53,7 @@ static ssize_t vexpress_hwmon_u32_show(struct device *dev,
int err;
u32 value;
- err = vexpress_config_read(data->func, 0, &value);
+ err = regmap_read(data->reg, 0, &value);
if (err)
return err;
@@ -68,11 +68,11 @@ static ssize_t vexpress_hwmon_u64_show(struct device *dev,
int err;
u32 value_hi, value_lo;
- err = vexpress_config_read(data->func, 0, &value_lo);
+ err = regmap_read(data->reg, 0, &value_lo);
if (err)
return err;
- err = vexpress_config_read(data->func, 1, &value_hi);
+ err = regmap_read(data->reg, 1, &value_hi);
if (err)
return err;
@@ -234,9 +234,9 @@ static int vexpress_hwmon_probe(struct platform_device *pdev)
type = match->data;
data->name = type->name;
- data->func = vexpress_config_func_get_by_dev(&pdev->dev);
- if (!data->func)
- return -ENODEV;
+ data->reg = devm_regmap_init_vexpress_config(&pdev->dev);
+ if (IS_ERR(data->reg))
+ return PTR_ERR(data->reg);
err = sysfs_create_groups(&pdev->dev.kobj, type->attr_groups);
if (err)
@@ -252,7 +252,6 @@ static int vexpress_hwmon_probe(struct platform_device *pdev)
error:
sysfs_remove_group(&pdev->dev.kobj, match->data);
- vexpress_config_func_put(data->func);
return err;
}
@@ -266,8 +265,6 @@ static int vexpress_hwmon_remove(struct platform_device *pdev)
match = of_match_device(vexpress_hwmon_of_match, &pdev->dev);
sysfs_remove_group(&pdev->dev.kobj, match->data);
- vexpress_config_func_put(data->func);
-
return 0;
}
diff --git a/drivers/mfd/Makefile b/drivers/mfd/Makefile
index 2851275..9ba838e 100644
--- a/drivers/mfd/Makefile
+++ b/drivers/mfd/Makefile
@@ -161,7 +161,7 @@ obj-$(CONFIG_MFD_RC5T583) += rc5t583.o rc5t583-irq.o
obj-$(CONFIG_MFD_SEC_CORE) += sec-core.o sec-irq.o
obj-$(CONFIG_MFD_SYSCON) += syscon.o
obj-$(CONFIG_MFD_LM3533) += lm3533-core.o lm3533-ctrlbank.o
-obj-$(CONFIG_VEXPRESS_CONFIG) += vexpress-config.o vexpress-sysreg.o
+obj-$(CONFIG_VEXPRESS_CONFIG) += vexpress-sysreg.o
obj-$(CONFIG_MFD_RETU) += retu-mfd.o
obj-$(CONFIG_MFD_AS3711) += as3711.o
obj-$(CONFIG_MFD_AS3722) += as3722.o
diff --git a/drivers/mfd/vexpress-config.c b/drivers/mfd/vexpress-config.c
deleted file mode 100644
index d0db89d..0000000
--- a/drivers/mfd/vexpress-config.c
+++ /dev/null
@@ -1,287 +0,0 @@
-/*
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * Copyright (C) 2012 ARM Limited
- */
-
-#define pr_fmt(fmt) "vexpress-config: " fmt
-
-#include <linux/bitops.h>
-#include <linux/completion.h>
-#include <linux/export.h>
-#include <linux/list.h>
-#include <linux/of.h>
-#include <linux/of_device.h>
-#include <linux/slab.h>
-#include <linux/string.h>
-#include <linux/vexpress.h>
-
-
-#define VEXPRESS_CONFIG_MAX_BRIDGES 2
-
-static struct vexpress_config_bridge {
- struct device_node *node;
- struct vexpress_config_bridge_info *info;
- struct list_head transactions;
- spinlock_t transactions_lock;
-} vexpress_config_bridges[VEXPRESS_CONFIG_MAX_BRIDGES];
-
-static DECLARE_BITMAP(vexpress_config_bridges_map,
- ARRAY_SIZE(vexpress_config_bridges));
-static DEFINE_MUTEX(vexpress_config_bridges_mutex);
-
-struct vexpress_config_bridge *vexpress_config_bridge_register(
- struct device_node *node,
- struct vexpress_config_bridge_info *info)
-{
- struct vexpress_config_bridge *bridge;
- int i;
-
- pr_debug("Registering bridge '%s'\n", info->name);
-
- mutex_lock(&vexpress_config_bridges_mutex);
- i = find_first_zero_bit(vexpress_config_bridges_map,
- ARRAY_SIZE(vexpress_config_bridges));
- if (i >= ARRAY_SIZE(vexpress_config_bridges)) {
- pr_err("Can't register more bridges!\n");
- mutex_unlock(&vexpress_config_bridges_mutex);
- return NULL;
- }
- __set_bit(i, vexpress_config_bridges_map);
- bridge = &vexpress_config_bridges[i];
-
- bridge->node = node;
- bridge->info = info;
- INIT_LIST_HEAD(&bridge->transactions);
- spin_lock_init(&bridge->transactions_lock);
-
- mutex_unlock(&vexpress_config_bridges_mutex);
-
- return bridge;
-}
-EXPORT_SYMBOL(vexpress_config_bridge_register);
-
-void vexpress_config_bridge_unregister(struct vexpress_config_bridge *bridge)
-{
- struct vexpress_config_bridge __bridge = *bridge;
- int i;
-
- mutex_lock(&vexpress_config_bridges_mutex);
- for (i = 0; i < ARRAY_SIZE(vexpress_config_bridges); i++)
- if (&vexpress_config_bridges[i] == bridge)
- __clear_bit(i, vexpress_config_bridges_map);
- mutex_unlock(&vexpress_config_bridges_mutex);
-
- WARN_ON(!list_empty(&__bridge.transactions));
- while (!list_empty(&__bridge.transactions))
- cpu_relax();
-}
-EXPORT_SYMBOL(vexpress_config_bridge_unregister);
-
-
-struct vexpress_config_func {
- struct vexpress_config_bridge *bridge;
- void *func;
-};
-
-struct vexpress_config_func *__vexpress_config_func_get(struct device *dev,
- struct device_node *node)
-{
- struct device_node *bridge_node;
- struct vexpress_config_func *func;
- int i;
-
- if (WARN_ON(dev && node && dev->of_node != node))
- return NULL;
- if (dev && !node)
- node = dev->of_node;
-
- func = kzalloc(sizeof(*func), GFP_KERNEL);
- if (!func)
- return NULL;
-
- bridge_node = of_node_get(node);
- while (bridge_node) {
- const __be32 *prop = of_get_property(bridge_node,
- "arm,vexpress,config-bridge", NULL);
-
- if (prop) {
- bridge_node = of_find_node_by_phandle(
- be32_to_cpup(prop));
- break;
- }
-
- bridge_node = of_get_next_parent(bridge_node);
- }
-
- mutex_lock(&vexpress_config_bridges_mutex);
- for (i = 0; i < ARRAY_SIZE(vexpress_config_bridges); i++) {
- struct vexpress_config_bridge *bridge =
- &vexpress_config_bridges[i];
-
- if (test_bit(i, vexpress_config_bridges_map) &&
- bridge->node == bridge_node) {
- func->bridge = bridge;
- func->func = bridge->info->func_get(dev, node);
- break;
- }
- }
- mutex_unlock(&vexpress_config_bridges_mutex);
-
- if (!func->func) {
- of_node_put(node);
- kfree(func);
- return NULL;
- }
-
- return func;
-}
-EXPORT_SYMBOL(__vexpress_config_func_get);
-
-void vexpress_config_func_put(struct vexpress_config_func *func)
-{
- func->bridge->info->func_put(func->func);
- of_node_put(func->bridge->node);
- kfree(func);
-}
-EXPORT_SYMBOL(vexpress_config_func_put);
-
-struct vexpress_config_trans {
- struct vexpress_config_func *func;
- int offset;
- bool write;
- u32 *data;
- int status;
- struct completion completion;
- struct list_head list;
-};
-
-static void vexpress_config_dump_trans(const char *what,
- struct vexpress_config_trans *trans)
-{
- pr_debug("%s %s trans %p func 0x%p offset %d data 0x%x status %d\n",
- what, trans->write ? "write" : "read", trans,
- trans->func->func, trans->offset,
- trans->data ? *trans->data : 0, trans->status);
-}
-
-static int vexpress_config_schedule(struct vexpress_config_trans *trans)
-{
- int status;
- struct vexpress_config_bridge *bridge = trans->func->bridge;
- unsigned long flags;
-
- init_completion(&trans->completion);
- trans->status = -EFAULT;
-
- spin_lock_irqsave(&bridge->transactions_lock, flags);
-
- if (list_empty(&bridge->transactions)) {
- vexpress_config_dump_trans("Executing", trans);
- status = bridge->info->func_exec(trans->func->func,
- trans->offset, trans->write, trans->data);
- } else {
- vexpress_config_dump_trans("Queuing", trans);
- status = VEXPRESS_CONFIG_STATUS_WAIT;
- }
-
- switch (status) {
- case VEXPRESS_CONFIG_STATUS_DONE:
- vexpress_config_dump_trans("Finished", trans);
- trans->status = status;
- break;
- case VEXPRESS_CONFIG_STATUS_WAIT:
- list_add_tail(&trans->list, &bridge->transactions);
- break;
- }
-
- spin_unlock_irqrestore(&bridge->transactions_lock, flags);
-
- return status;
-}
-
-void vexpress_config_complete(struct vexpress_config_bridge *bridge,
- int status)
-{
- struct vexpress_config_trans *trans;
- unsigned long flags;
- const char *message = "Completed";
-
- spin_lock_irqsave(&bridge->transactions_lock, flags);
-
- trans = list_first_entry(&bridge->transactions,
- struct vexpress_config_trans, list);
- trans->status = status;
-
- do {
- vexpress_config_dump_trans(message, trans);
- list_del(&trans->list);
- complete(&trans->completion);
-
- if (list_empty(&bridge->transactions))
- break;
-
- trans = list_first_entry(&bridge->transactions,
- struct vexpress_config_trans, list);
- vexpress_config_dump_trans("Executing pending", trans);
- trans->status = bridge->info->func_exec(trans->func->func,
- trans->offset, trans->write, trans->data);
- message = "Finished pending";
- } while (trans->status == VEXPRESS_CONFIG_STATUS_DONE);
-
- spin_unlock_irqrestore(&bridge->transactions_lock, flags);
-}
-EXPORT_SYMBOL(vexpress_config_complete);
-
-int vexpress_config_wait(struct vexpress_config_trans *trans)
-{
- wait_for_completion(&trans->completion);
-
- return trans->status;
-}
-EXPORT_SYMBOL(vexpress_config_wait);
-
-int vexpress_config_read(struct vexpress_config_func *func, int offset,
- u32 *data)
-{
- struct vexpress_config_trans trans = {
- .func = func,
- .offset = offset,
- .write = false,
- .data = data,
- .status = 0,
- };
- int status = vexpress_config_schedule(&trans);
-
- if (status == VEXPRESS_CONFIG_STATUS_WAIT)
- status = vexpress_config_wait(&trans);
-
- return status;
-}
-EXPORT_SYMBOL(vexpress_config_read);
-
-int vexpress_config_write(struct vexpress_config_func *func, int offset,
- u32 data)
-{
- struct vexpress_config_trans trans = {
- .func = func,
- .offset = offset,
- .write = true,
- .data = &data,
- .status = 0,
- };
- int status = vexpress_config_schedule(&trans);
-
- if (status == VEXPRESS_CONFIG_STATUS_WAIT)
- status = vexpress_config_wait(&trans);
-
- return status;
-}
-EXPORT_SYMBOL(vexpress_config_write);
diff --git a/drivers/mfd/vexpress-sysreg.c b/drivers/mfd/vexpress-sysreg.c
index 35281e8..b4138a7 100644
--- a/drivers/mfd/vexpress-sysreg.c
+++ b/drivers/mfd/vexpress-sysreg.c
@@ -16,8 +16,10 @@
#include <linux/io.h>
#include <linux/leds.h>
#include <linux/of_address.h>
+#include <linux/of_platform.h>
#include <linux/platform_device.h>
#include <linux/regulator/driver.h>
+#include <linux/sched.h>
#include <linux/slab.h>
#include <linux/stat.h>
#include <linux/timer.h>
@@ -72,9 +74,18 @@
static void __iomem *vexpress_sysreg_base;
static struct device *vexpress_sysreg_dev;
-static int vexpress_master_site;
+static LIST_HEAD(vexpress_sysreg_config_funcs);
+static struct device *vexpress_sysreg_config_bridge;
+static int vexpress_sysreg_get_master(void)
+{
+ if (readl(vexpress_sysreg_base + SYS_MISC) & SYS_MISC_MASTERSITE)
+ return VEXPRESS_SITE_DB2;
+
+ return VEXPRESS_SITE_DB1;
+}
+
void vexpress_flags_set(u32 data)
{
writel(~0, vexpress_sysreg_base + SYS_FLAGSCLR);
@@ -84,7 +95,7 @@ void vexpress_flags_set(u32 data)
u32 vexpress_get_procid(int site)
{
if (site == VEXPRESS_SITE_MASTER)
- site = vexpress_master_site;
+ site = vexpress_sysreg_get_master();
return readl(vexpress_sysreg_base + (site == VEXPRESS_SITE_DB1 ?
SYS_PROCID0 : SYS_PROCID1));
@@ -114,130 +125,33 @@ void __iomem *vexpress_get_24mhz_clock_base(void)
}
-static void vexpress_sysreg_find_prop(struct device_node *node,
- const char *name, u32 *val)
-{
- of_node_get(node);
- while (node) {
- if (of_property_read_u32(node, name, val) == 0) {
- of_node_put(node);
- return;
- }
- node = of_get_next_parent(node);
- }
-}
-
-unsigned __vexpress_get_site(struct device *dev, struct device_node *node)
-{
- u32 site = 0;
-
- WARN_ON(dev && node && dev->of_node != node);
- if (dev && !node)
- node = dev->of_node;
-
- if (node) {
- vexpress_sysreg_find_prop(node, "arm,vexpress,site", &site);
- } else if (dev && dev->bus == &platform_bus_type) {
- struct platform_device *pdev = to_platform_device(dev);
-
- if (pdev->num_resources == 1 &&
- pdev->resource[0].flags == IORESOURCE_BUS)
- site = pdev->resource[0].start;
- } else if (dev && strncmp(dev_name(dev), "ct:", 3) == 0) {
- site = VEXPRESS_SITE_MASTER;
- }
-
- if (site == VEXPRESS_SITE_MASTER)
- site = vexpress_master_site;
-
- return site;
-}
-
-
struct vexpress_sysreg_config_func {
- u32 template;
- u32 device;
+ struct list_head list;
+ struct regmap *regmap;
+ int num_templates;
+ u32 template[0]; /* Keep this last */
};
-static struct vexpress_config_bridge *vexpress_sysreg_config_bridge;
-static struct timer_list vexpress_sysreg_config_timer;
-static u32 *vexpress_sysreg_config_data;
-static int vexpress_sysreg_config_tries;
-
-static void *vexpress_sysreg_config_func_get(struct device *dev,
- struct device_node *node)
+static int vexpress_sysreg_config_exec(struct vexpress_sysreg_config_func *func,
+ int index, bool write, u32 *data)
{
- struct vexpress_sysreg_config_func *config_func;
- u32 site = 0;
- u32 position = 0;
- u32 dcc = 0;
- u32 func_device[2];
- int err = -EFAULT;
-
- if (node) {
- of_node_get(node);
- vexpress_sysreg_find_prop(node, "arm,vexpress,site", &site);
- vexpress_sysreg_find_prop(node, "arm,vexpress,position",
- &position);
- vexpress_sysreg_find_prop(node, "arm,vexpress,dcc", &dcc);
- err = of_property_read_u32_array(node,
- "arm,vexpress-sysreg,func", func_device,
- ARRAY_SIZE(func_device));
- of_node_put(node);
- } else if (dev && dev->bus == &platform_bus_type) {
- struct platform_device *pdev = to_platform_device(dev);
-
- if (pdev->num_resources == 1 &&
- pdev->resource[0].flags == IORESOURCE_BUS) {
- site = pdev->resource[0].start;
- func_device[0] = pdev->resource[0].end;
- func_device[1] = pdev->id;
- err = 0;
- }
- }
- if (err)
- return NULL;
-
- config_func = kzalloc(sizeof(*config_func), GFP_KERNEL);
- if (!config_func)
- return NULL;
-
- config_func->template = SYS_CFGCTRL_DCC(dcc);
- config_func->template |= SYS_CFGCTRL_FUNC(func_device[0]);
- config_func->template |= SYS_CFGCTRL_SITE(site == VEXPRESS_SITE_MASTER ?
- vexpress_master_site : site);
- config_func->template |= SYS_CFGCTRL_POSITION(position);
- config_func->device |= func_device[1];
-
- dev_dbg(vexpress_sysreg_dev, "func 0x%p = 0x%x, %d\n", config_func,
- config_func->template, config_func->device);
-
- return config_func;
-}
-
-static void vexpress_sysreg_config_func_put(void *func)
-{
- kfree(func);
-}
-
-static int vexpress_sysreg_config_func_exec(void *func, int offset,
- bool write, u32 *data)
-{
- int status;
- struct vexpress_sysreg_config_func *config_func = func;
- u32 command;
+ u32 command, status;
+ int tries;
+ long timeout;
if (WARN_ON(!vexpress_sysreg_base))
return -ENOENT;
+ if (WARN_ON(index > func->num_templates))
+ return -EINVAL;
+
command = readl(vexpress_sysreg_base + SYS_CFGCTRL);
if (WARN_ON(command & SYS_CFGCTRL_START))
return -EBUSY;
- command = SYS_CFGCTRL_START;
+ command = func->template[index];
+ command |= SYS_CFGCTRL_START;
command |= write ? SYS_CFGCTRL_WRITE : 0;
- command |= config_func->template;
- command |= SYS_CFGCTRL_DEVICE(config_func->device + offset);
/* Use a canary for reads */
if (!write)
@@ -250,90 +164,190 @@ static int vexpress_sysreg_config_func_exec(void *func, int offset,
writel(command, vexpress_sysreg_base + SYS_CFGCTRL);
mb();
- if (vexpress_sysreg_dev) {
- /* Schedule completion check */
- if (!write)
- vexpress_sysreg_config_data = data;
- vexpress_sysreg_config_tries = 100;
- mod_timer(&vexpress_sysreg_config_timer,
- jiffies + usecs_to_jiffies(100));
- status = VEXPRESS_CONFIG_STATUS_WAIT;
- } else {
- /* Early execution, no timer available, have to spin */
- u32 cfgstat;
+ /* The operation can take ages... Go to sleep, 100us initially */
+ tries = 100;
+ timeout = 100;
+ do {
+ set_current_state(TASK_INTERRUPTIBLE);
+ schedule_timeout(usecs_to_jiffies(timeout));
+ if (signal_pending(current))
+ return -EINTR;
+
+ status = readl(vexpress_sysreg_base + SYS_CFGSTAT);
+ if (status & SYS_CFGSTAT_ERR)
+ return -EFAULT;
+
+ if (timeout > 20)
+ timeout -= 20;
+ } while (--tries && !(status & SYS_CFGSTAT_COMPLETE));
+ if (WARN_ON_ONCE(!tries))
+ return -ETIMEDOUT;
+
+ if (!write) {
+ *data = readl(vexpress_sysreg_base + SYS_CFGDATA);
+ dev_dbg(vexpress_sysreg_dev, "func %p, read data %x\n",
+ func, *data);
+ }
- do {
- cpu_relax();
- cfgstat = readl(vexpress_sysreg_base + SYS_CFGSTAT);
- } while (!cfgstat);
+ return 0;
+}
- if (!write && (cfgstat & SYS_CFGSTAT_COMPLETE))
- *data = readl(vexpress_sysreg_base + SYS_CFGDATA);
- status = VEXPRESS_CONFIG_STATUS_DONE;
+static int vexpress_sysreg_config_read(void *context, unsigned int index,
+ unsigned int *val)
+{
+ struct vexpress_sysreg_config_func *func = context;
- if (cfgstat & SYS_CFGSTAT_ERR)
- status = -EINVAL;
- }
+ return vexpress_sysreg_config_exec(func, index, false, val);
+}
- return status;
+static int vexpress_sysreg_config_write(void *context, unsigned int index,
+ unsigned int val)
+{
+ struct vexpress_sysreg_config_func *func = context;
+
+ return vexpress_sysreg_config_exec(func, index, true, &val);
}
-struct vexpress_config_bridge_info vexpress_sysreg_config_bridge_info = {
- .name = "vexpress-sysreg",
- .func_get = vexpress_sysreg_config_func_get,
- .func_put = vexpress_sysreg_config_func_put,
- .func_exec = vexpress_sysreg_config_func_exec,
+struct regmap_config vexpress_sysreg_regmap_config = {
+ .lock = vexpress_config_lock,
+ .unlock = vexpress_config_unlock,
+ .reg_bits = 32,
+ .val_bits = 32,
+ .reg_read = vexpress_sysreg_config_read,
+ .reg_write = vexpress_sysreg_config_write,
+ .reg_format_endian = REGMAP_ENDIAN_LITTLE,
+ .val_format_endian = REGMAP_ENDIAN_LITTLE,
};
-static void vexpress_sysreg_config_complete(unsigned long data)
+static struct regmap *vexpress_sysreg_config_regmap_init(struct device *dev,
+ void *context)
{
- int status = VEXPRESS_CONFIG_STATUS_DONE;
- u32 cfgstat = readl(vexpress_sysreg_base + SYS_CFGSTAT);
-
- if (cfgstat & SYS_CFGSTAT_ERR)
- status = -EINVAL;
- if (!vexpress_sysreg_config_tries--)
- status = -ETIMEDOUT;
-
- if (status < 0) {
- dev_err(vexpress_sysreg_dev, "error %d\n", status);
- } else if (!(cfgstat & SYS_CFGSTAT_COMPLETE)) {
- mod_timer(&vexpress_sysreg_config_timer,
- jiffies + usecs_to_jiffies(50));
- return;
+ struct platform_device *pdev = to_platform_device(dev);
+ struct vexpress_sysreg_config_func *func;
+ struct property *prop;
+ const __be32 *val = NULL;
+ __be32 energy_quirk[4];
+ int num;
+ u32 site, position, dcc;
+ int err;
+ int i;
+
+ if (dev->of_node) {
+ err = vexpress_config_get_topo(dev->of_node, &site, &position,
+ &dcc);
+ if (err)
+ return ERR_PTR(err);
+
+ prop = of_find_property(dev->of_node,
+ "arm,vexpress-sysreg,func", NULL);
+ if (!prop)
+ return ERR_PTR(-EINVAL);
+
+ num = prop->length / sizeof(u32) / 2;
+ val = prop->value;
+ } else {
+ if (pdev->num_resources != 1 ||
+ pdev->resource[0].flags != IORESOURCE_BUS)
+ return ERR_PTR(-EFAULT);
+
+ site = pdev->resource[0].start;
+ if (site == VEXPRESS_SITE_MASTER)
+ site = vexpress_sysreg_get_master();
+ position = 0;
+ dcc = 0;
+ num = 1;
}
- if (vexpress_sysreg_config_data) {
- *vexpress_sysreg_config_data = readl(vexpress_sysreg_base +
- SYS_CFGDATA);
- dev_dbg(vexpress_sysreg_dev, "read data %x\n",
- *vexpress_sysreg_config_data);
- vexpress_sysreg_config_data = NULL;
+ /*
+ * "arm,vexpress-energy" function used to be described
+ * by its first device only, now it requires both
+ */
+ if (num == 1 && of_device_is_compatible(dev->of_node,
+ "arm,vexpress-energy")) {
+ num = 2;
+ energy_quirk[0] = *val;
+ energy_quirk[2] = *val++;
+ energy_quirk[1] = *val;
+ energy_quirk[3] = cpu_to_be32(be32_to_cpup(val) + 1);
+ val = energy_quirk;
}
- vexpress_config_complete(vexpress_sysreg_config_bridge, status);
-}
+ func = kzalloc(sizeof(*func) + sizeof(*func->template) * num,
+ GFP_KERNEL);
+ if (!func)
+ return NULL;
+ func->num_templates = num;
-void vexpress_sysreg_setup(struct device_node *node)
-{
- if (WARN_ON(!vexpress_sysreg_base))
- return;
+ for (i = 0; i < num; i++) {
+ u32 function, device;
- if (readl(vexpress_sysreg_base + SYS_MISC) & SYS_MISC_MASTERSITE)
- vexpress_master_site = VEXPRESS_SITE_DB2;
+ if (dev->of_node) {
+ function = be32_to_cpup(val++);
+ device = be32_to_cpup(val++);
+ } else {
+ function = pdev->resource[0].end;
+ device = pdev->id;
+ }
+
+ dev_dbg(dev, "func %p: %u/%u/%u/%u/%u\n",
+ func, site, position, dcc,
+ function, device);
+
+ func->template[i] = SYS_CFGCTRL_DCC(dcc);
+ func->template[i] |= SYS_CFGCTRL_SITE(site);
+ func->template[i] |= SYS_CFGCTRL_POSITION(position);
+ func->template[i] |= SYS_CFGCTRL_FUNC(function);
+ func->template[i] |= SYS_CFGCTRL_DEVICE(device);
+ }
+
+ vexpress_sysreg_regmap_config.max_register = num - 1;
+
+ func->regmap = regmap_init(dev, NULL, func,
+ &vexpress_sysreg_regmap_config);
+
+ if (IS_ERR(func->regmap))
+ kfree(func);
else
- vexpress_master_site = VEXPRESS_SITE_DB1;
+ list_add(&func->list, &vexpress_sysreg_config_funcs);
- vexpress_sysreg_config_bridge = vexpress_config_bridge_register(
- node, &vexpress_sysreg_config_bridge_info);
- WARN_ON(!vexpress_sysreg_config_bridge);
+ return func->regmap;
+}
+
+static void vexpress_sysreg_config_regmap_exit(struct regmap *regmap,
+ void *context)
+{
+ struct vexpress_sysreg_config_func *func, *tmp;
+
+ regmap_exit(regmap);
+
+ list_for_each_entry_safe(func, tmp, &vexpress_sysreg_config_funcs,
+ list) {
+ if (func->regmap == regmap) {
+ list_del(&vexpress_sysreg_config_funcs);
+ kfree(func);
+ break;
+ }
+ }
+}
+
+static struct vexpress_config_bridge_ops vexpress_sysreg_config_bridge_ops = {
+ .regmap_init = vexpress_sysreg_config_regmap_init,
+ .regmap_exit = vexpress_sysreg_config_regmap_exit,
+};
+
+int vexpress_sysreg_config_device_register(struct platform_device *pdev)
+{
+ pdev->dev.parent = vexpress_sysreg_config_bridge;
+
+ return platform_device_register(pdev);
}
+
void __init vexpress_sysreg_early_init(void __iomem *base)
{
vexpress_sysreg_base = base;
- vexpress_sysreg_setup(NULL);
+ vexpress_config_set_master(vexpress_sysreg_get_master());
}
void __init vexpress_sysreg_of_early_init(void)
@@ -344,10 +358,14 @@ void __init vexpress_sysreg_of_early_init(void)
return;
node = of_find_compatible_node(NULL, NULL, "arm,vexpress-sysreg");
- if (node) {
- vexpress_sysreg_base = of_iomap(node, 0);
- vexpress_sysreg_setup(node);
- }
+ if (WARN_ON(!node))
+ return;
+
+ vexpress_sysreg_base = of_iomap(node, 0);
+ if (WARN_ON(!vexpress_sysreg_base))
+ return;
+
+ vexpress_config_set_master(vexpress_sysreg_get_master());
}
@@ -470,28 +488,22 @@ static int vexpress_sysreg_probe(struct platform_device *pdev)
return -EBUSY;
}
- if (!vexpress_sysreg_base) {
+ if (!vexpress_sysreg_base)
vexpress_sysreg_base = devm_ioremap(&pdev->dev, res->start,
resource_size(res));
- vexpress_sysreg_setup(pdev->dev.of_node);
- }
if (!vexpress_sysreg_base) {
dev_err(&pdev->dev, "Failed to obtain base address!\n");
return -EFAULT;
}
- setup_timer(&vexpress_sysreg_config_timer,
- vexpress_sysreg_config_complete, 0);
-
+ vexpress_config_set_master(vexpress_sysreg_get_master());
vexpress_sysreg_dev = &pdev->dev;
#ifdef CONFIG_GPIOLIB
vexpress_sysreg_gpio_chip.dev = &pdev->dev;
err = gpiochip_add(&vexpress_sysreg_gpio_chip);
if (err) {
- vexpress_config_bridge_unregister(
- vexpress_sysreg_config_bridge);
dev_err(&pdev->dev, "Failed to register GPIO chip! (%d)\n",
err);
return err;
@@ -502,6 +514,10 @@ static int vexpress_sysreg_probe(struct platform_device *pdev)
sizeof(vexpress_sysreg_leds_pdata));
#endif
+ vexpress_sysreg_config_bridge = vexpress_config_bridge_register(
+ &pdev->dev, &vexpress_sysreg_config_bridge_ops, NULL);
+ WARN_ON(!vexpress_sysreg_config_bridge);
+
device_create_file(vexpress_sysreg_dev, &dev_attr_sys_id);
return 0;
@@ -522,7 +538,12 @@ static struct platform_driver vexpress_sysreg_driver = {
static int __init vexpress_sysreg_init(void)
{
- vexpress_sysreg_of_early_init();
+ struct device_node *node;
+
+ /* Need the sysreg early, before any other device... */
+ for_each_matching_node(node, vexpress_sysreg_match)
+ of_platform_device_create(node, NULL, NULL);
+
return platform_driver_register(&vexpress_sysreg_driver);
}
core_initcall(vexpress_sysreg_init);
diff --git a/drivers/power/reset/vexpress-poweroff.c b/drivers/power/reset/vexpress-poweroff.c
index b95cf71..4dc102e2 100644
--- a/drivers/power/reset/vexpress-poweroff.c
+++ b/drivers/power/reset/vexpress-poweroff.c
@@ -23,10 +23,10 @@
static void vexpress_reset_do(struct device *dev, const char *what)
{
int err = -ENOENT;
- struct vexpress_config_func *func = dev_get_drvdata(dev);
+ struct regmap *reg = dev_get_drvdata(dev);
- if (func) {
- err = vexpress_config_write(func, 0, 0);
+ if (reg) {
+ err = regmap_write(reg, 0, 0);
if (!err)
mdelay(1000);
}
@@ -91,17 +91,17 @@ static int vexpress_reset_probe(struct platform_device *pdev)
enum vexpress_reset_func func;
const struct of_device_id *match =
of_match_device(vexpress_reset_of_match, &pdev->dev);
- struct vexpress_config_func *config_func;
+ struct regmap *regmap;
if (match)
func = (enum vexpress_reset_func)match->data;
else
func = pdev->id_entry->driver_data;
- config_func = vexpress_config_func_get_by_dev(&pdev->dev);
- if (!config_func)
- return -EINVAL;
- dev_set_drvdata(&pdev->dev, config_func);
+ regmap = devm_regmap_init_vexpress_config(&pdev->dev);
+ if (IS_ERR(regmap))
+ return PTR_ERR(regmap);
+ dev_set_drvdata(&pdev->dev, regmap);
switch (func) {
case FUNC_SHUTDOWN:
diff --git a/drivers/regulator/vexpress.c b/drivers/regulator/vexpress.c
index f3ae28a..2863428 100644
--- a/drivers/regulator/vexpress.c
+++ b/drivers/regulator/vexpress.c
@@ -26,14 +26,14 @@
struct vexpress_regulator {
struct regulator_desc desc;
struct regulator_dev *regdev;
- struct vexpress_config_func *func;
+ struct regmap *regmap;
};
static int vexpress_regulator_get_voltage(struct regulator_dev *regdev)
{
struct vexpress_regulator *reg = rdev_get_drvdata(regdev);
u32 uV;
- int err = vexpress_config_read(reg->func, 0, &uV);
+ int err = regmap_read(reg->regmap, 0, &uV);
return err ? err : uV;
}
@@ -43,7 +43,7 @@ static int vexpress_regulator_set_voltage(struct regulator_dev *regdev,
{
struct vexpress_regulator *reg = rdev_get_drvdata(regdev);
- return vexpress_config_write(reg->func, 0, min_uV);
+ return regmap_write(reg->regmap, 0, min_uV);
}
static struct regulator_ops vexpress_regulator_ops_ro = {
@@ -57,22 +57,17 @@ static struct regulator_ops vexpress_regulator_ops = {
static int vexpress_regulator_probe(struct platform_device *pdev)
{
- int err;
struct vexpress_regulator *reg;
struct regulator_init_data *init_data;
struct regulator_config config = { };
reg = devm_kzalloc(&pdev->dev, sizeof(*reg), GFP_KERNEL);
- if (!reg) {
- err = -ENOMEM;
- goto error_kzalloc;
- }
+ if (!reg)
+ return -ENOMEM;
- reg->func = vexpress_config_func_get_by_dev(&pdev->dev);
- if (!reg->func) {
- err = -ENXIO;
- goto error_get_func;
- }
+ reg->regmap = devm_regmap_init_vexpress_config(&pdev->dev);
+ if (IS_ERR(reg->regmap))
+ return PTR_ERR(reg->regmap);
reg->desc.name = dev_name(&pdev->dev);
reg->desc.type = REGULATOR_VOLTAGE;
@@ -80,10 +75,8 @@ static int vexpress_regulator_probe(struct platform_device *pdev)
reg->desc.continuous_voltage_range = true;
init_data = of_get_regulator_init_data(&pdev->dev, pdev->dev.of_node);
- if (!init_data) {
- err = -EINVAL;
- goto error_get_regulator_init_data;
- }
+ if (!init_data)
+ return -EINVAL;
init_data->constraints.apply_uV = 0;
if (init_data->constraints.min_uV && init_data->constraints.max_uV)
@@ -97,30 +90,12 @@ static int vexpress_regulator_probe(struct platform_device *pdev)
config.of_node = pdev->dev.of_node;
reg->regdev = devm_regulator_register(&pdev->dev, ®->desc, &config);
- if (IS_ERR(reg->regdev)) {
- err = PTR_ERR(reg->regdev);
- goto error_regulator_register;
- }
+ if (IS_ERR(reg->regdev))
+ return PTR_ERR(reg->regdev);
platform_set_drvdata(pdev, reg);
return 0;
-
-error_regulator_register:
-error_get_regulator_init_data:
- vexpress_config_func_put(reg->func);
-error_get_func:
-error_kzalloc:
- return err;
-}
-
-static int vexpress_regulator_remove(struct platform_device *pdev)
-{
- struct vexpress_regulator *reg = platform_get_drvdata(pdev);
-
- vexpress_config_func_put(reg->func);
-
- return 0;
}
static struct of_device_id vexpress_regulator_of_match[] = {
@@ -130,7 +105,6 @@ static struct of_device_id vexpress_regulator_of_match[] = {
static struct platform_driver vexpress_regulator_driver = {
.probe = vexpress_regulator_probe,
- .remove = vexpress_regulator_remove,
.driver = {
.name = DRVNAME,
.owner = THIS_MODULE,
diff --git a/include/linux/vexpress.h b/include/linux/vexpress.h
index 617c01b..6b206ba 100644
--- a/include/linux/vexpress.h
+++ b/include/linux/vexpress.h
@@ -15,16 +15,15 @@
#define _LINUX_VEXPRESS_H
#include <linux/device.h>
+#include <linux/platform_device.h>
#include <linux/reboot.h>
+#include <linux/regmap.h>
#define VEXPRESS_SITE_MB 0
#define VEXPRESS_SITE_DB1 1
#define VEXPRESS_SITE_DB2 2
#define VEXPRESS_SITE_MASTER 0xf
-#define VEXPRESS_CONFIG_STATUS_DONE 0
-#define VEXPRESS_CONFIG_STATUS_WAIT 1
-
#define VEXPRESS_GPIO_MMC_CARDIN 0
#define VEXPRESS_GPIO_MMC_WPROT 1
#define VEXPRESS_GPIO_FLASH_WPn 2
@@ -44,63 +43,30 @@
.flags = IORESOURCE_BUS, \
}
-/* Config bridge API */
+/* Config infrastructure */
-/**
- * struct vexpress_config_bridge_info - description of the platform
- * configuration infrastructure bridge.
- *
- * @name: Bridge name
- *
- * @func_get: Obtains pointer to a configuration function for a given
- * device or a Device Tree node, to be used with @func_put
- * and @func_exec. The node pointer should take precedence
- * over device pointer when both are passed.
- *
- * @func_put: Tells the bridge that the function will not be used any
- * more, so all allocated resources can be released.
- *
- * @func_exec: Executes a configuration function read or write operation.
- * The offset selects a 32 bit word of the value accessed.
- * Must return VEXPRESS_CONFIG_STATUS_DONE when operation
- * is finished immediately, VEXPRESS_CONFIG_STATUS_WAIT when
- * will be completed in some time or negative value in case
- * of error.
- */
-struct vexpress_config_bridge_info {
- const char *name;
- void *(*func_get)(struct device *dev, struct device_node *node);
- void (*func_put)(void *func);
- int (*func_exec)(void *func, int offset, bool write, u32 *data);
-};
+void vexpress_config_set_master(u32 site);
+u32 vexpress_config_get_master(void);
-struct vexpress_config_bridge;
+void vexpress_config_lock(void *arg);
+void vexpress_config_unlock(void *arg);
-struct vexpress_config_bridge *vexpress_config_bridge_register(
- struct device_node *node,
- struct vexpress_config_bridge_info *info);
-void vexpress_config_bridge_unregister(struct vexpress_config_bridge *bridge);
+int vexpress_config_get_topo(struct device_node *node, u32 *site,
+ u32 *position, u32 *dcc);
-void vexpress_config_complete(struct vexpress_config_bridge *bridge,
- int status);
+/* Config bridge API */
-/* Config function API */
+struct vexpress_config_bridge_ops {
+ struct regmap * (*regmap_init)(struct device *dev, void *context);
+ void (*regmap_exit)(struct regmap *regmap, void *context);
+};
-struct vexpress_config_func;
+struct device *vexpress_config_bridge_register(struct device *parent,
+ struct vexpress_config_bridge_ops *ops, void *context);
-struct vexpress_config_func *__vexpress_config_func_get(struct device *dev,
- struct device_node *node);
-#define vexpress_config_func_get_by_dev(dev) \
- __vexpress_config_func_get(dev, NULL)
-#define vexpress_config_func_get_by_node(node) \
- __vexpress_config_func_get(NULL, node)
-void vexpress_config_func_put(struct vexpress_config_func *func);
+/* Config regmap API */
-/* Both may sleep! */
-int vexpress_config_read(struct vexpress_config_func *func, int offset,
- u32 *data);
-int vexpress_config_write(struct vexpress_config_func *func, int offset,
- u32 data);
+struct regmap *devm_regmap_init_vexpress_config(struct device *dev);
/* Platform control */
@@ -109,19 +75,12 @@ u32 vexpress_get_hbi(int site);
void *vexpress_get_24mhz_clock_base(void);
void vexpress_flags_set(u32 data);
-#define vexpress_get_site_by_node(node) __vexpress_get_site(NULL, node)
-#define vexpress_get_site_by_dev(dev) __vexpress_get_site(dev, NULL)
-unsigned __vexpress_get_site(struct device *dev, struct device_node *node);
-
void vexpress_sysreg_early_init(void __iomem *base);
void vexpress_sysreg_of_early_init(void);
+int vexpress_sysreg_config_device_register(struct platform_device *pdev);
/* Clocks */
-struct clk *vexpress_osc_setup(struct device *dev);
-void vexpress_osc_of_setup(struct device_node *node);
-
void vexpress_clk_init(void __iomem *sp810_base);
-void vexpress_clk_of_init(void);
#endif
--
1.9.1
On Wed, Apr 30, 2014 at 05:01:26PM +0100, Pawel Moll wrote:
> Components of the Versatile Express platform (configuration
> microcontrollers on motherboard and daughterboards in particular)
> talk to each other over a custom configuration bus. They
> provide miscellaneous functions (from clock generator control
> to energy sensors) which are represented as platform devices
> (and Device Tree nodes). The transactions on the bus can
> be generated by different "bridges" in the system, some
> of which are universal for the whole platform (for the price
> of high transfer latencies), others restricted to a subsystem
> (but much faster).
>
> Until now drivers for such functions were using custom "func"
> API, which is being replaced in this patch by regmap calls.
> This required:
>
> * a rework (and move to drivers/bus directory, as suggested
> by Samuel and Arnd) of the config bus core, which is much
> simpler now and uses device model infrastructure (class)
> to keep track of the bridges; non-DT case (soon to be
> retired anyway) is simply covered by a special device
> registration function
>
> * the new config-bus driver also takes over device population,
> so there is no need for special matching table for
> of_platform_populate nor "simple-bus" hack in the arm64
> model dtsi file (relevant bindings documentation has
> been updated); this allows all the vexpress devices
> fit into normal device model, making it possible
> to remove plenty of early inits and other hacks in
> the near future
>
> * adaptation of the syscfg bridge implementation in the
> sysreg driver, again making it much simpler; there is
> a special case of the "energy" function spanning two
> registers, where they should be both defined in the tree
> now, but backward compatibility is maintained in the code
>
> * modification of the relevant drivers:
>
> * hwmon - just a straight-forward API change
> * power/reset driver - API change
> * regulator - API change plus error handling
> simplification
> * osc clock driver - this one required larger rework
> in order to turn in into a standard platform driver
>
> Signed-off-by: Pawel Moll <[email protected]>
> Acked-by: Mark Brown <[email protected]>
> Acked-by: Lee Jones <[email protected]>
For hwmon:
Acked-by: Guenter Roeck <[email protected]>